1 files changed, 128 insertions, 74 deletions

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index b04e0afdcb21..c2a238426425 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -29,10 +29,6 @@ bool no_fw_recovery;
 module_param(no_fw_recovery, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(no_fw_recovery, " disable automatic FW error recovery");
 
-static bool no_fw_load = true;
-module_param(no_fw_load, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(no_fw_load, " do not download FW, use one in on-card flash.");
-
 /* if not set via modparam, will be set to default value of 1/8 of
  * rx ring size during init flow
  */
@@ -72,6 +68,7 @@ MODULE_PARM_DESC(mtu_max, " Max MTU value.");
 
 static uint rx_ring_order = WIL_RX_RING_SIZE_ORDER_DEFAULT;
 static uint tx_ring_order = WIL_TX_RING_SIZE_ORDER_DEFAULT;
+static uint bcast_ring_order = WIL_BCAST_RING_SIZE_ORDER_DEFAULT;
 
 static int ring_order_set(const char *val, const struct kernel_param *kp)
 {
@@ -220,6 +217,7 @@ static void _wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid,
 	switch (wdev->iftype) {
 	case NL80211_IFTYPE_STATION:
 	case NL80211_IFTYPE_P2P_CLIENT:
+		wil_bcast_fini(wil);
 		netif_tx_stop_all_queues(ndev);
 		netif_carrier_off(ndev);
 
@@ -364,6 +362,35 @@ static int wil_find_free_vring(struct wil6210_priv *wil)
 	return -EINVAL;
 }
 
+int wil_bcast_init(struct wil6210_priv *wil)
+{
+	int ri = wil->bcast_vring, rc;
+
+	if ((ri >= 0) && wil->vring_tx[ri].va)
+		return 0;
+
+	ri = wil_find_free_vring(wil);
+	if (ri < 0)
+		return ri;
+
+	rc = wil_vring_init_bcast(wil, ri, 1 << bcast_ring_order);
+	if (rc == 0)
+		wil->bcast_vring = ri;
+
+	return rc;
+}
+
+void wil_bcast_fini(struct wil6210_priv *wil)
+{
+	int ri = wil->bcast_vring;
+
+	if (ri < 0)
+		return;
+
+	wil->bcast_vring = -1;
+	wil_vring_fini_tx(wil, ri);
+}
+
 static void wil_connect_worker(struct work_struct *work)
 {
 	int rc;
@@ -411,6 +438,7 @@ int wil_priv_init(struct wil6210_priv *wil)
 	init_completion(&wil->wmi_call);
 
 	wil->pending_connect_cid = -1;
+	wil->bcast_vring = -1;
 	setup_timer(&wil->connect_timer, wil_connect_timer_fn, (ulong)wil);
 	setup_timer(&wil->scan_timer, wil_scan_timer_fn, (ulong)wil);
 
@@ -520,8 +548,6 @@ static int wil_target_reset(struct wil6210_priv *wil)
 {
 	int delay = 0;
 	u32 x;
-	bool is_reset_v2 = test_bit(hw_capability_reset_v2,
-				    wil->hw_capabilities);
 
 	wil_dbg_misc(wil, "Resetting \"%s\"...\n", wil->hw_name);
 
@@ -532,82 +558,67 @@ static int wil_target_reset(struct wil6210_priv *wil)
 
 	wil_halt_cpu(wil);
 
+	/* clear all boot loader "ready" bits */
+	W(RGF_USER_BL + offsetof(struct RGF_BL, ready), 0);
 	/* Clear Fw Download notification */
 	C(RGF_USER_USAGE_6, BIT(0));
 
-	if (is_reset_v2) {
-		S(RGF_CAF_OSC_CONTROL, BIT_CAF_OSC_XTAL_EN);
-		/* XTAL stabilization should take about 3ms */
-		usleep_range(5000, 7000);
-		x = R(RGF_CAF_PLL_LOCK_STATUS);
-		if (!(x & BIT_CAF_OSC_DIG_XTAL_STABLE)) {
-			wil_err(wil, "Xtal stabilization timeout\n"
-				"RGF_CAF_PLL_LOCK_STATUS = 0x%08x\n", x);
-			return -ETIME;
-		}
-		/* switch 10k to XTAL*/
-		C(RGF_USER_SPARROW_M_4, BIT_SPARROW_M_4_SEL_SLEEP_OR_REF);
-		/* 40 MHz */
-		C(RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_CAR_AHB_SW_SEL);
-
-		W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_0, 0x3ff81f);
-		W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1, 0xf);
+	S(RGF_CAF_OSC_CONTROL, BIT_CAF_OSC_XTAL_EN);
+	/* XTAL stabilization should take about 3ms */
+	usleep_range(5000, 7000);
+	x = R(RGF_CAF_PLL_LOCK_STATUS);
+	if (!(x & BIT_CAF_OSC_DIG_XTAL_STABLE)) {
+		wil_err(wil, "Xtal stabilization timeout\n"
+			"RGF_CAF_PLL_LOCK_STATUS = 0x%08x\n", x);
+		return -ETIME;
 	}
+	/* switch 10k to XTAL*/
+	C(RGF_USER_SPARROW_M_4, BIT_SPARROW_M_4_SEL_SLEEP_OR_REF);
+	/* 40 MHz */
+	C(RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_CAR_AHB_SW_SEL);
+
+	W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_0, 0x3ff81f);
+	W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1, 0xf);
 
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0xFE000000);
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0x0000003F);
-	W(RGF_USER_CLKS_CTL_SW_RST_VEC_3,
-	  is_reset_v2 ? 0x000000f0 : 0x00000170);
+	W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x000000f0);
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0xFFE7FE00);
 
-	if (is_reset_v2) {
-		W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_0, 0x0);
-		W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1, 0x0);
-	}
+	W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_0, 0x0);
+	W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1, 0x0);
 
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0);
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0);
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0);
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
 
-	if (is_reset_v2) {
-		W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000003);
-		/* reset A2 PCIE AHB */
-		W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00008000);
-	} else {
-		W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000001);
-		W(RGF_PCIE_LOS_COUNTER_CTL, BIT(6) | BIT(8));
-		W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00008000);
-	}
+	W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000003);
+	W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00008000); /* reset A2 PCIE AHB */
 
-	/* TODO: check order here!!! Erez code is different */
 	W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
 
-	/* wait until device ready. typical time is 200..250 msec */
+	/* wait until device ready. typical time is 20..80 msec */
 	do {
 		msleep(RST_DELAY);
-		x = R(RGF_USER_HW_MACHINE_STATE);
+		x = R(RGF_USER_BL + offsetof(struct RGF_BL, ready));
 		if (delay++ > RST_COUNT) {
-			wil_err(wil, "Reset not completed, hw_state 0x%08x\n",
+			wil_err(wil, "Reset not completed, bl.ready 0x%08x\n",
 				x);
 			return -ETIME;
 		}
-	} while (x != HW_MACHINE_BOOT_DONE);
-
-	if (!is_reset_v2)
-		W(RGF_PCIE_LOS_COUNTER_CTL, BIT(8));
+	} while (!(x & BIT_BL_READY));
 
 	C(RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD);
 
+	/* enable fix for HW bug related to the SA/DA swap in AP Rx */
+	S(RGF_DMA_OFUL_NID_0, BIT_DMA_OFUL_NID_0_RX_EXT_TR_EN |
+	  BIT_DMA_OFUL_NID_0_RX_EXT_A3_SRC);
+
 	wil_dbg_misc(wil, "Reset completed in %d ms\n", delay * RST_DELAY);
 	return 0;
 }
 
-#undef R
-#undef W
-#undef S
-#undef C
-
 void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r)
 {
 	le32_to_cpus(&r->base);
@@ -617,6 +628,32 @@ void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r)
 	le32_to_cpus(&r->head);
 }
 
+static int wil_get_bl_info(struct wil6210_priv *wil)
+{
+	struct net_device *ndev = wil_to_ndev(wil);
+	struct RGF_BL bl;
+
+	wil_memcpy_fromio_32(&bl, wil->csr + HOSTADDR(RGF_USER_BL), sizeof(bl));
+	le32_to_cpus(&bl.ready);
+	le32_to_cpus(&bl.version);
+	le32_to_cpus(&bl.rf_type);
+	le32_to_cpus(&bl.baseband_type);
+
+	if (!is_valid_ether_addr(bl.mac_address)) {
+		wil_err(wil, "BL: Invalid MAC %pM\n", bl.mac_address);
+		return -EINVAL;
+	}
+
+	ether_addr_copy(ndev->perm_addr, bl.mac_address);
+	if (!is_valid_ether_addr(ndev->dev_addr))
+		ether_addr_copy(ndev->dev_addr, bl.mac_address);
+	wil_info(wil,
+		 "Boot Loader: ver = %d MAC = %pM RF = 0x%08x bband = 0x%08x\n",
+		 bl.version, bl.mac_address, bl.rf_type, bl.baseband_type);
+
+	return 0;
+}
+
 static int wil_wait_for_fw_ready(struct wil6210_priv *wil)
 {
 	ulong to = msecs_to_jiffies(1000);
@@ -637,7 +674,7 @@ static int wil_wait_for_fw_ready(struct wil6210_priv *wil)
  * After calling this routine, you're expected to reload
  * the firmware.
  */
-int wil_reset(struct wil6210_priv *wil)
+int wil_reset(struct wil6210_priv *wil, bool load_fw)
 {
 	int rc;
 
@@ -651,6 +688,7 @@ int wil_reset(struct wil6210_priv *wil)
 
 	cancel_work_sync(&wil->disconnect_worker);
 	wil6210_disconnect(wil, NULL, WLAN_REASON_DEAUTH_LEAVING, false);
+	wil_bcast_fini(wil);
 
 	/* prevent NAPI from being scheduled */
 	bitmap_zero(wil->status, wil_status_last);
@@ -675,46 +713,62 @@ int wil_reset(struct wil6210_priv *wil)
 	if (rc)
 		return rc;
 
-	if (!no_fw_load) {
-		wil_info(wil, "Use firmware <%s>\n", WIL_FW_NAME);
+	rc = wil_get_bl_info(wil);
+	if (rc)
+		return rc;
+
+	if (load_fw) {
+		wil_info(wil, "Use firmware <%s> + board <%s>\n", WIL_FW_NAME,
+			 WIL_FW2_NAME);
+
 		wil_halt_cpu(wil);
 		/* Loading f/w from the file */
 		rc = wil_request_firmware(wil, WIL_FW_NAME);
 		if (rc)
 			return rc;
+		rc = wil_request_firmware(wil, WIL_FW2_NAME);
+		if (rc)
+			return rc;
+
+		/* Mark FW as loaded from host */
+		S(RGF_USER_USAGE_6, 1);
 
-		/* clear any interrupts which on-card-firmware may have set */
+		/* clear any interrupts which on-card-firmware
+		 * may have set
+		 */
 		wil6210_clear_irq(wil);
-		{ /* CAF_ICR - clear and mask */
-			u32 a = HOSTADDR(RGF_CAF_ICR) +
-				offsetof(struct RGF_ICR, ICR);
-			u32 m = HOSTADDR(RGF_CAF_ICR) +
-				offsetof(struct RGF_ICR, IMV);
-			u32 icr = ioread32(wil->csr + a);
-
-			iowrite32(icr, wil->csr + a); /* W1C */
-			iowrite32(~0, wil->csr + m);
-			wmb(); /* wait for completion */
-		}
+		/* CAF_ICR - clear and mask */
+		/* it is W1C, clear by writing back same value */
+		S(RGF_CAF_ICR + offsetof(struct RGF_ICR, ICR), 0);
+		W(RGF_CAF_ICR + offsetof(struct RGF_ICR, IMV), ~0);
+
 		wil_release_cpu(wil);
-	} else {
-		wil_info(wil, "Use firmware from on-card flash\n");
 	}
 
 	/* init after reset */
 	wil->pending_connect_cid = -1;
+	wil->ap_isolate = 0;
 	reinit_completion(&wil->wmi_ready);
 	reinit_completion(&wil->wmi_call);
 
-	wil_configure_interrupt_moderation(wil);
-	wil_unmask_irq(wil);
+	if (load_fw) {
+		wil_configure_interrupt_moderation(wil);
+		wil_unmask_irq(wil);
 
-	/* we just started MAC, wait for FW ready */
-	rc = wil_wait_for_fw_ready(wil);
+		/* we just started MAC, wait for FW ready */
+		rc = wil_wait_for_fw_ready(wil);
+		if (rc == 0) /* check FW is responsive */
+			rc = wmi_echo(wil);
+	}
 
 	return rc;
 }
 
+#undef R
+#undef W
+#undef S
+#undef C
+
 void wil_fw_error_recovery(struct wil6210_priv *wil)
 {
 	wil_dbg_misc(wil, "starting fw error recovery\n");
@@ -730,7 +784,7 @@ int __wil_up(struct wil6210_priv *wil)
 
 	WARN_ON(!mutex_is_locked(&wil->mutex));
 
-	rc = wil_reset(wil);
+	rc = wil_reset(wil, true);
 	if (rc)
 		return rc;
 
@@ -837,7 +891,7 @@ int __wil_down(struct wil6210_priv *wil)
 	if (!iter)
 		wil_err(wil, "timeout waiting for idle FW/HW\n");
 
-	wil_rx_fini(wil);
+	wil_reset(wil, false);
 
 	return 0;
 }