diff options
Diffstat (limited to 'drivers/net/wireless/b43/phy_n.c')
| -rw-r--r-- | drivers/net/wireless/b43/phy_n.c | 130 |
1 files changed, 95 insertions, 35 deletions
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index e2a3f0d5bcc2..9f0bcf3b8414 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -34,6 +34,7 @@ #include "radio_2056.h" #include "radio_2057.h" #include "main.h" +#include "ppr.h" struct nphy_txgains { u16 tx_lpf[2]; @@ -3606,16 +3607,6 @@ static void b43_nphy_iq_cal_gain_params(struct b43_wldev *dev, u16 core, * Tx and Rx **************************************************/ -static void b43_nphy_op_adjust_txpower(struct b43_wldev *dev) -{//TODO -} - -static enum b43_txpwr_result b43_nphy_op_recalc_txpower(struct b43_wldev *dev, - bool ignore_tssi) -{//TODO - return B43_TXPWR_RES_DONE; -} - /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxPwrCtrlEnable */ static void b43_nphy_tx_power_ctrl(struct b43_wldev *dev, bool enable) { @@ -4069,6 +4060,7 @@ static void b43_nphy_tx_power_ctl_setup(struct b43_wldev *dev) s16 a1[2], b0[2], b1[2]; u8 idle[2]; + u8 ppr_max; s8 target[2]; s32 num, den, pwr; u32 regval[64]; @@ -4147,7 +4139,12 @@ static void b43_nphy_tx_power_ctl_setup(struct b43_wldev *dev) b1[0] = b1[1] = -1393; } } - /* target[0] = target[1] = nphy->tx_power_max; */ + + ppr_max = b43_ppr_get_max(dev, &nphy->tx_pwr_max_ppr); + if (ppr_max) { + target[0] = ppr_max; + target[1] = ppr_max; + } if (dev->phy.rev >= 3) { if (sprom->fem.ghz2.tssipos) @@ -4235,8 +4232,9 @@ static void b43_nphy_tx_gain_table_upload(struct b43_wldev *dev) const u32 *table = NULL; u32 rfpwr_offset; - u8 pga_gain; + u8 pga_gain, pad_gain; int i; + const s16 *uninitialized_var(rf_pwr_offset_table); table = b43_nphy_get_tx_gain_table(dev); if (!table) @@ -4252,13 +4250,27 @@ static void b43_nphy_tx_gain_table_upload(struct b43_wldev *dev) nphy->gmval = (table[0] >> 16) & 0x7000; #endif + if (phy->rev >= 19) { + return; + } else if (phy->rev >= 7) { + rf_pwr_offset_table = b43_ntab_get_rf_pwr_offset_table(dev); + if (!rf_pwr_offset_table) + return; + /* TODO: Enable this once we have gains configured */ + return; + } + for (i = 0; i < 128; i++) { if (phy->rev >= 19) { /* TODO */ return; } else if (phy->rev >= 7) { - /* TODO */ - return; + pga_gain = (table[i] >> 24) & 0xf; + pad_gain = (table[i] >> 19) & 0x1f; + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) + rfpwr_offset = rf_pwr_offset_table[pad_gain]; + else + rfpwr_offset = rf_pwr_offset_table[pga_gain]; } else { pga_gain = (table[i] >> 24) & 0xF; if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) @@ -5874,6 +5886,69 @@ static void b43_nphy_set_rx_core_state(struct b43_wldev *dev, u8 mask) b43_mac_enable(dev); } +static enum b43_txpwr_result b43_nphy_op_recalc_txpower(struct b43_wldev *dev, + bool ignore_tssi) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_n *nphy = dev->phy.n; + struct ieee80211_channel *channel = dev->wl->hw->conf.chandef.chan; + struct b43_ppr *ppr = &nphy->tx_pwr_max_ppr; + u8 max; /* qdBm */ + bool tx_pwr_state; + + if (nphy->tx_pwr_last_recalc_freq == channel->center_freq && + nphy->tx_pwr_last_recalc_limit == phy->desired_txpower) + return B43_TXPWR_RES_DONE; + + /* Make sure we have a clean PPR */ + b43_ppr_clear(dev, ppr); + + /* HW limitations */ + b43_ppr_load_max_from_sprom(dev, ppr, B43_BAND_2G); + + /* Regulatory & user settings */ + max = INT_TO_Q52(phy->chandef->chan->max_power); + if (phy->desired_txpower) + max = min_t(u8, max, INT_TO_Q52(phy->desired_txpower)); + b43_ppr_apply_max(dev, ppr, max); + if (b43_debug(dev, B43_DBG_XMITPOWER)) + b43dbg(dev->wl, "Calculated TX power: " Q52_FMT "\n", + Q52_ARG(b43_ppr_get_max(dev, ppr))); + + /* TODO: Enable this once we get gains working */ +#if 0 + /* Some extra gains */ + hw_gain = 6; /* N-PHY specific */ + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) + hw_gain += sprom->antenna_gain.a0; + else + hw_gain += sprom->antenna_gain.a1; + b43_ppr_add(dev, ppr, -hw_gain); +#endif + + /* Make sure we didn't go too low */ + b43_ppr_apply_min(dev, ppr, INT_TO_Q52(8)); + + /* Apply */ + tx_pwr_state = nphy->txpwrctrl; + b43_mac_suspend(dev); + b43_nphy_tx_power_ctl_setup(dev); + if (dev->dev->core_rev == 11 || dev->dev->core_rev == 12) { + b43_maskset32(dev, B43_MMIO_MACCTL, ~0, B43_MACCTL_PHY_LOCK); + b43_read32(dev, B43_MMIO_MACCTL); + udelay(1); + } + b43_nphy_tx_power_ctrl(dev, nphy->txpwrctrl); + if (dev->dev->core_rev == 11 || dev->dev->core_rev == 12) + b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_PHY_LOCK, 0); + b43_mac_enable(dev); + + nphy->tx_pwr_last_recalc_freq = channel->center_freq; + nphy->tx_pwr_last_recalc_limit = phy->desired_txpower; + + return B43_TXPWR_RES_DONE; +} + /************************************************** * N-PHY init **************************************************/ @@ -6294,7 +6369,7 @@ static void b43_nphy_channel_setup(struct b43_wldev *dev, b43_mac_switch_freq(dev, spuravoid); if (dev->phy.rev == 3 || dev->phy.rev == 4) - ; /* TODO: reset PLL */ + b43_wireless_core_phy_pll_reset(dev); if (spuravoid) b43_phy_set(dev, B43_NPHY_BBCFG, B43_NPHY_BBCFG_RSTRX); @@ -6407,6 +6482,7 @@ static int b43_nphy_op_allocate(struct b43_wldev *dev) nphy = kzalloc(sizeof(*nphy), GFP_KERNEL); if (!nphy) return -ENOMEM; + dev->phy.n = nphy; return 0; @@ -6497,26 +6573,13 @@ static inline void check_phyreg(struct b43_wldev *dev, u16 offset) #endif /* B43_DEBUG */ } -static u16 b43_nphy_op_read(struct b43_wldev *dev, u16 reg) -{ - check_phyreg(dev, reg); - b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); - return b43_read16(dev, B43_MMIO_PHY_DATA); -} - -static void b43_nphy_op_write(struct b43_wldev *dev, u16 reg, u16 value) -{ - check_phyreg(dev, reg); - b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); - b43_write16(dev, B43_MMIO_PHY_DATA, value); -} - static void b43_nphy_op_maskset(struct b43_wldev *dev, u16 reg, u16 mask, u16 set) { check_phyreg(dev, reg); - b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + b43_write16f(dev, B43_MMIO_PHY_CONTROL, reg); b43_maskset16(dev, B43_MMIO_PHY_DATA, mask, set); + dev->phy.writes_counter = 1; } static u16 b43_nphy_op_radio_read(struct b43_wldev *dev, u16 reg) @@ -6529,7 +6592,7 @@ static u16 b43_nphy_op_radio_read(struct b43_wldev *dev, u16 reg) else reg |= 0x100; - b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + b43_write16f(dev, B43_MMIO_RADIO_CONTROL, reg); return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); } @@ -6538,7 +6601,7 @@ static void b43_nphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value) /* Register 1 is a 32-bit register. */ B43_WARN_ON(dev->phy.rev < 7 && reg == 1); - b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + b43_write16f(dev, B43_MMIO_RADIO_CONTROL, reg); b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value); } @@ -6652,8 +6715,6 @@ const struct b43_phy_operations b43_phyops_n = { .free = b43_nphy_op_free, .prepare_structs = b43_nphy_op_prepare_structs, .init = b43_nphy_op_init, - .phy_read = b43_nphy_op_read, - .phy_write = b43_nphy_op_write, .phy_maskset = b43_nphy_op_maskset, .radio_read = b43_nphy_op_radio_read, .radio_write = b43_nphy_op_radio_write, @@ -6662,5 +6723,4 @@ const struct b43_phy_operations b43_phyops_n = { .switch_channel = b43_nphy_op_switch_channel, .get_default_chan = b43_nphy_op_get_default_chan, .recalc_txpower = b43_nphy_op_recalc_txpower, - .adjust_txpower = b43_nphy_op_adjust_txpower, }; |