diff options
Diffstat (limited to 'drivers/net/wireless/brcm80211/brcmfmac/dhd.h')
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 487 |
1 files changed, 12 insertions, 475 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index 899a2ada5b82..939d6b132922 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -21,481 +21,33 @@ #ifndef _BRCMF_H_ #define _BRCMF_H_ -#define BRCMF_VERSION_STR "4.218.248.5" - #include "fweh.h" -/******************************************************************************* - * IO codes that are interpreted by dongle firmware - ******************************************************************************/ -#define BRCMF_C_GET_VERSION 1 -#define BRCMF_C_UP 2 -#define BRCMF_C_DOWN 3 -#define BRCMF_C_SET_PROMISC 10 -#define BRCMF_C_GET_RATE 12 -#define BRCMF_C_GET_INFRA 19 -#define BRCMF_C_SET_INFRA 20 -#define BRCMF_C_GET_AUTH 21 -#define BRCMF_C_SET_AUTH 22 -#define BRCMF_C_GET_BSSID 23 -#define BRCMF_C_GET_SSID 25 -#define BRCMF_C_SET_SSID 26 -#define BRCMF_C_TERMINATED 28 -#define BRCMF_C_GET_CHANNEL 29 -#define BRCMF_C_SET_CHANNEL 30 -#define BRCMF_C_GET_SRL 31 -#define BRCMF_C_SET_SRL 32 -#define BRCMF_C_GET_LRL 33 -#define BRCMF_C_SET_LRL 34 -#define BRCMF_C_GET_RADIO 37 -#define BRCMF_C_SET_RADIO 38 -#define BRCMF_C_GET_PHYTYPE 39 -#define BRCMF_C_SET_KEY 45 -#define BRCMF_C_SET_PASSIVE_SCAN 49 -#define BRCMF_C_SCAN 50 -#define BRCMF_C_SCAN_RESULTS 51 -#define BRCMF_C_DISASSOC 52 -#define BRCMF_C_REASSOC 53 -#define BRCMF_C_SET_ROAM_TRIGGER 55 -#define BRCMF_C_SET_ROAM_DELTA 57 -#define BRCMF_C_GET_BCNPRD 75 -#define BRCMF_C_SET_BCNPRD 76 -#define BRCMF_C_GET_DTIMPRD 77 -#define BRCMF_C_SET_DTIMPRD 78 -#define BRCMF_C_SET_COUNTRY 84 -#define BRCMF_C_GET_PM 85 -#define BRCMF_C_SET_PM 86 -#define BRCMF_C_GET_CURR_RATESET 114 -#define BRCMF_C_GET_AP 117 -#define BRCMF_C_SET_AP 118 -#define BRCMF_C_GET_RSSI 127 -#define BRCMF_C_GET_WSEC 133 -#define BRCMF_C_SET_WSEC 134 -#define BRCMF_C_GET_PHY_NOISE 135 -#define BRCMF_C_GET_BSS_INFO 136 -#define BRCMF_C_GET_BANDLIST 140 -#define BRCMF_C_SET_SCB_TIMEOUT 158 -#define BRCMF_C_GET_PHYLIST 180 -#define BRCMF_C_SET_SCAN_CHANNEL_TIME 185 -#define BRCMF_C_SET_SCAN_UNASSOC_TIME 187 -#define BRCMF_C_SCB_DEAUTHENTICATE_FOR_REASON 201 -#define BRCMF_C_GET_VALID_CHANNELS 217 -#define BRCMF_C_GET_KEY_PRIMARY 235 -#define BRCMF_C_SET_KEY_PRIMARY 236 -#define BRCMF_C_SET_SCAN_PASSIVE_TIME 258 -#define BRCMF_C_GET_VAR 262 -#define BRCMF_C_SET_VAR 263 - -/* phy types (returned by WLC_GET_PHYTPE) */ -#define WLC_PHY_TYPE_A 0 -#define WLC_PHY_TYPE_B 1 -#define WLC_PHY_TYPE_G 2 -#define WLC_PHY_TYPE_N 4 -#define WLC_PHY_TYPE_LP 5 -#define WLC_PHY_TYPE_SSN 6 -#define WLC_PHY_TYPE_HT 7 -#define WLC_PHY_TYPE_LCN 8 -#define WLC_PHY_TYPE_NULL 0xf - #define TOE_TX_CSUM_OL 0x00000001 #define TOE_RX_CSUM_OL 0x00000002 -#define BRCMF_BSS_INFO_VERSION 109 /* curr ver of brcmf_bss_info_le struct */ - -/* size of brcmf_scan_params not including variable length array */ -#define BRCMF_SCAN_PARAMS_FIXED_SIZE 64 - -/* masks for channel and ssid count */ -#define BRCMF_SCAN_PARAMS_COUNT_MASK 0x0000ffff -#define BRCMF_SCAN_PARAMS_NSSID_SHIFT 16 - -/* primary (ie tx) key */ -#define BRCMF_PRIMARY_KEY (1 << 1) - /* For supporting multiple interfaces */ #define BRCMF_MAX_IFS 16 -#define DOT11_BSSTYPE_ANY 2 #define DOT11_MAX_DEFAULT_KEYS 4 -#define BRCMF_ESCAN_REQ_VERSION 1 - -#define WLC_BSS_RSSI_ON_CHANNEL 0x0002 - -#define BRCMF_MAXRATES_IN_SET 16 /* max # of rates in rateset */ -#define BRCMF_STA_ASSOC 0x10 /* Associated */ - -#define BRCMF_E_STATUS_SUCCESS 0 -#define BRCMF_E_STATUS_FAIL 1 -#define BRCMF_E_STATUS_TIMEOUT 2 -#define BRCMF_E_STATUS_NO_NETWORKS 3 -#define BRCMF_E_STATUS_ABORT 4 -#define BRCMF_E_STATUS_NO_ACK 5 -#define BRCMF_E_STATUS_UNSOLICITED 6 -#define BRCMF_E_STATUS_ATTEMPT 7 -#define BRCMF_E_STATUS_PARTIAL 8 -#define BRCMF_E_STATUS_NEWSCAN 9 -#define BRCMF_E_STATUS_NEWASSOC 10 -#define BRCMF_E_STATUS_11HQUIET 11 -#define BRCMF_E_STATUS_SUPPRESS 12 -#define BRCMF_E_STATUS_NOCHANS 13 -#define BRCMF_E_STATUS_CS_ABORT 15 -#define BRCMF_E_STATUS_ERROR 16 - -#define BRCMF_E_REASON_INITIAL_ASSOC 0 -#define BRCMF_E_REASON_LOW_RSSI 1 -#define BRCMF_E_REASON_DEAUTH 2 -#define BRCMF_E_REASON_DISASSOC 3 -#define BRCMF_E_REASON_BCNS_LOST 4 -#define BRCMF_E_REASON_MINTXRATE 9 -#define BRCMF_E_REASON_TXFAIL 10 - -#define BRCMF_E_REASON_LINK_BSSCFG_DIS 4 -#define BRCMF_E_REASON_FAST_ROAM_FAILED 5 -#define BRCMF_E_REASON_DIRECTED_ROAM 6 -#define BRCMF_E_REASON_TSPEC_REJECTED 7 -#define BRCMF_E_REASON_BETTER_AP 8 - -#define BRCMF_E_PRUNE_ENCR_MISMATCH 1 -#define BRCMF_E_PRUNE_BCAST_BSSID 2 -#define BRCMF_E_PRUNE_MAC_DENY 3 -#define BRCMF_E_PRUNE_MAC_NA 4 -#define BRCMF_E_PRUNE_REG_PASSV 5 -#define BRCMF_E_PRUNE_SPCT_MGMT 6 -#define BRCMF_E_PRUNE_RADAR 7 -#define BRCMF_E_RSN_MISMATCH 8 -#define BRCMF_E_PRUNE_NO_COMMON_RATES 9 -#define BRCMF_E_PRUNE_BASIC_RATES 10 -#define BRCMF_E_PRUNE_CIPHER_NA 12 -#define BRCMF_E_PRUNE_KNOWN_STA 13 -#define BRCMF_E_PRUNE_WDS_PEER 15 -#define BRCMF_E_PRUNE_QBSS_LOAD 16 -#define BRCMF_E_PRUNE_HOME_AP 17 - -#define BRCMF_E_SUP_OTHER 0 -#define BRCMF_E_SUP_DECRYPT_KEY_DATA 1 -#define BRCMF_E_SUP_BAD_UCAST_WEP128 2 -#define BRCMF_E_SUP_BAD_UCAST_WEP40 3 -#define BRCMF_E_SUP_UNSUP_KEY_LEN 4 -#define BRCMF_E_SUP_PW_KEY_CIPHER 5 -#define BRCMF_E_SUP_MSG3_TOO_MANY_IE 6 -#define BRCMF_E_SUP_MSG3_IE_MISMATCH 7 -#define BRCMF_E_SUP_NO_INSTALL_FLAG 8 -#define BRCMF_E_SUP_MSG3_NO_GTK 9 -#define BRCMF_E_SUP_GRP_KEY_CIPHER 10 -#define BRCMF_E_SUP_GRP_MSG1_NO_GTK 11 -#define BRCMF_E_SUP_GTK_DECRYPT_FAIL 12 -#define BRCMF_E_SUP_SEND_FAIL 13 -#define BRCMF_E_SUP_DEAUTH 14 - -#define BRCMF_E_IF_ADD 1 -#define BRCMF_E_IF_DEL 2 -#define BRCMF_E_IF_CHANGE 3 - -#define BRCMF_E_IF_FLAG_NOIF 1 - -#define BRCMF_E_IF_ROLE_STA 0 -#define BRCMF_E_IF_ROLE_AP 1 -#define BRCMF_E_IF_ROLE_WDS 2 - -#define BRCMF_E_LINK_BCN_LOSS 1 -#define BRCMF_E_LINK_DISASSOC 2 -#define BRCMF_E_LINK_ASSOC_REC 3 -#define BRCMF_E_LINK_BSSCFG_DIS 4 - /* Small, medium and maximum buffer size for dcmd */ #define BRCMF_DCMD_SMLEN 256 #define BRCMF_DCMD_MEDLEN 1536 #define BRCMF_DCMD_MAXLEN 8192 -#define BRCMF_AMPDU_RX_REORDER_MAXFLOWS 256 - -/* Pattern matching filter. Specifies an offset within received packets to - * start matching, the pattern to match, the size of the pattern, and a bitmask - * that indicates which bits within the pattern should be matched. - */ -struct brcmf_pkt_filter_pattern_le { - /* - * Offset within received packet to start pattern matching. - * Offset '0' is the first byte of the ethernet header. - */ - __le32 offset; - /* Size of the pattern. Bitmask must be the same size.*/ - __le32 size_bytes; - /* - * Variable length mask and pattern data. mask starts at offset 0. - * Pattern immediately follows mask. - */ - u8 mask_and_pattern[1]; -}; - -/* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */ -struct brcmf_pkt_filter_le { - __le32 id; /* Unique filter id, specified by app. */ - __le32 type; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */ - __le32 negate_match; /* Negate the result of filter matches */ - union { /* Filter definitions */ - struct brcmf_pkt_filter_pattern_le pattern; /* Filter pattern */ - } u; -}; - -/* IOVAR "pkt_filter_enable" parameter. */ -struct brcmf_pkt_filter_enable_le { - __le32 id; /* Unique filter id */ - __le32 enable; /* Enable/disable bool */ -}; - -/* BSS info structure - * Applications MUST CHECK ie_offset field and length field to access IEs and - * next bss_info structure in a vector (in struct brcmf_scan_results) +/* IOCTL from host to device are limited in lenght. A device can only handle + * ethernet frame size. This limitation is to be applied by protocol layer. */ -struct brcmf_bss_info_le { - __le32 version; /* version field */ - __le32 length; /* byte length of data in this record, - * starting at version and including IEs - */ - u8 BSSID[ETH_ALEN]; - __le16 beacon_period; /* units are Kusec */ - __le16 capability; /* Capability information */ - u8 SSID_len; - u8 SSID[32]; - struct { - __le32 count; /* # rates in this set */ - u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ - } rateset; /* supported rates */ - __le16 chanspec; /* chanspec for bss */ - __le16 atim_window; /* units are Kusec */ - u8 dtim_period; /* DTIM period */ - __le16 RSSI; /* receive signal strength (in dBm) */ - s8 phy_noise; /* noise (in dBm) */ - - u8 n_cap; /* BSS is 802.11N Capable */ - /* 802.11N BSS Capabilities (based on HT_CAP_*): */ - __le32 nbss_cap; - u8 ctl_ch; /* 802.11N BSS control channel number */ - __le32 reserved32[1]; /* Reserved for expansion of BSS properties */ - u8 flags; /* flags */ - u8 reserved[3]; /* Reserved for expansion of BSS properties */ - u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */ +#define BRCMF_TX_IOCTL_MAX_MSG_SIZE (ETH_FRAME_LEN+ETH_FCS_LEN) - __le16 ie_offset; /* offset at which IEs start, from beginning */ - __le32 ie_length; /* byte length of Information Elements */ - __le16 SNR; /* average SNR of during frame reception */ - /* Add new fields here */ - /* variable length Information Elements */ -}; - -struct brcm_rateset_le { - /* # rates in this set */ - __le32 count; - /* rates in 500kbps units w/hi bit set if basic */ - u8 rates[BRCMF_MAXRATES_IN_SET]; -}; - -struct brcmf_ssid { - u32 SSID_len; - unsigned char SSID[32]; -}; - -struct brcmf_ssid_le { - __le32 SSID_len; - unsigned char SSID[32]; -}; - -struct brcmf_scan_params_le { - struct brcmf_ssid_le ssid_le; /* default: {0, ""} */ - u8 bssid[ETH_ALEN]; /* default: bcast */ - s8 bss_type; /* default: any, - * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT - */ - u8 scan_type; /* flags, 0 use default */ - __le32 nprobes; /* -1 use default, number of probes per channel */ - __le32 active_time; /* -1 use default, dwell time per channel for - * active scanning - */ - __le32 passive_time; /* -1 use default, dwell time per channel - * for passive scanning - */ - __le32 home_time; /* -1 use default, dwell time for the - * home channel between channel scans - */ - __le32 channel_num; /* count of channels and ssids that follow - * - * low half is count of channels in - * channel_list, 0 means default (use all - * available channels) - * - * high half is entries in struct brcmf_ssid - * array that follows channel_list, aligned for - * s32 (4 bytes) meaning an odd channel count - * implies a 2-byte pad between end of - * channel_list and first ssid - * - * if ssid count is zero, single ssid in the - * fixed parameter portion is assumed, otherwise - * ssid in the fixed portion is ignored - */ - __le16 channel_list[1]; /* list of chanspecs */ -}; - -struct brcmf_scan_results { - u32 buflen; - u32 version; - u32 count; - struct brcmf_bss_info_le bss_info_le[]; -}; - -struct brcmf_escan_params_le { - __le32 version; - __le16 action; - __le16 sync_id; - struct brcmf_scan_params_le params_le; -}; - -struct brcmf_escan_result_le { - __le32 buflen; - __le32 version; - __le16 sync_id; - __le16 bss_count; - struct brcmf_bss_info_le bss_info_le; -}; - -#define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(struct brcmf_escan_result_le) - \ - sizeof(struct brcmf_bss_info_le)) - -/* used for association with a specific BSSID and chanspec list */ -struct brcmf_assoc_params_le { - /* 00:00:00:00:00:00: broadcast scan */ - u8 bssid[ETH_ALEN]; - /* 0: all available channels, otherwise count of chanspecs in - * chanspec_list */ - __le32 chanspec_num; - /* list of chanspecs */ - __le16 chanspec_list[1]; -}; - -/* used for join with or without a specific bssid and channel list */ -struct brcmf_join_params { - struct brcmf_ssid_le ssid_le; - struct brcmf_assoc_params_le params_le; -}; - -/* scan params for extended join */ -struct brcmf_join_scan_params_le { - u8 scan_type; /* 0 use default, active or passive scan */ - __le32 nprobes; /* -1 use default, nr of probes per channel */ - __le32 active_time; /* -1 use default, dwell time per channel for - * active scanning - */ - __le32 passive_time; /* -1 use default, dwell time per channel - * for passive scanning - */ - __le32 home_time; /* -1 use default, dwell time for the home - * channel between channel scans - */ -}; - -/* extended join params */ -struct brcmf_ext_join_params_le { - struct brcmf_ssid_le ssid_le; /* {0, ""}: wildcard scan */ - struct brcmf_join_scan_params_le scan_le; - struct brcmf_assoc_params_le assoc_le; -}; - -struct brcmf_wsec_key { - u32 index; /* key index */ - u32 len; /* key length */ - u8 data[WLAN_MAX_KEY_LEN]; /* key data */ - u32 pad_1[18]; - u32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ - u32 flags; /* misc flags */ - u32 pad_2[3]; - u32 iv_initialized; /* has IV been initialized already? */ - u32 pad_3; - /* Rx IV */ - struct { - u32 hi; /* upper 32 bits of IV */ - u16 lo; /* lower 16 bits of IV */ - } rxiv; - u32 pad_4[2]; - u8 ea[ETH_ALEN]; /* per station */ -}; - -/* - * dongle requires same struct as above but with fields in little endian order - */ -struct brcmf_wsec_key_le { - __le32 index; /* key index */ - __le32 len; /* key length */ - u8 data[WLAN_MAX_KEY_LEN]; /* key data */ - __le32 pad_1[18]; - __le32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ - __le32 flags; /* misc flags */ - __le32 pad_2[3]; - __le32 iv_initialized; /* has IV been initialized already? */ - __le32 pad_3; - /* Rx IV */ - struct { - __le32 hi; /* upper 32 bits of IV */ - __le16 lo; /* lower 16 bits of IV */ - } rxiv; - __le32 pad_4[2]; - u8 ea[ETH_ALEN]; /* per station */ -}; - -/* Used to get specific STA parameters */ -struct brcmf_scb_val_le { - __le32 val; - u8 ea[ETH_ALEN]; -}; - -/* channel encoding */ -struct brcmf_channel_info_le { - __le32 hw_channel; - __le32 target_channel; - __le32 scan_channel; -}; - -struct brcmf_sta_info_le { - __le16 ver; /* version of this struct */ - __le16 len; /* length in bytes of this structure */ - __le16 cap; /* sta's advertised capabilities */ - __le32 flags; /* flags defined below */ - __le32 idle; /* time since data pkt rx'd from sta */ - u8 ea[ETH_ALEN]; /* Station address */ - __le32 count; /* # rates in this set */ - u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units */ - /* w/hi bit set if basic */ - __le32 in; /* seconds elapsed since associated */ - __le32 listen_interval_inms; /* Min Listen interval in ms for STA */ - __le32 tx_pkts; /* # of packets transmitted */ - __le32 tx_failures; /* # of packets failed */ - __le32 rx_ucast_pkts; /* # of unicast packets received */ - __le32 rx_mcast_pkts; /* # of multicast packets received */ - __le32 tx_rate; /* Rate of last successful tx frame */ - __le32 rx_rate; /* Rate of last successful rx frame */ - __le32 rx_decrypt_succeeds; /* # of packet decrypted successfully */ - __le32 rx_decrypt_failures; /* # of packet decrypted failed */ -}; - -struct brcmf_chanspec_list { - __le32 count; /* # of entries */ - __le32 element[1]; /* variable length uint32 list */ -}; +#define BRCMF_AMPDU_RX_REORDER_MAXFLOWS 256 -/* - * WLC_E_PROBRESP_MSG - * WLC_E_P2P_PROBREQ_MSG - * WLC_E_ACTION_FRAME_RX +/* Length of firmware version string stored for + * ethtool driver info which uses 32 bytes as well. */ -struct brcmf_rx_mgmt_data { - __be16 version; - __be16 chanspec; - __be32 rssi; - __be32 mactime; - __be32 rate; -}; +#define BRCMF_DRIVER_FIRMWARE_VERSION_LEN 32 /* Bus independent dongle command */ struct brcmf_dcmd { @@ -535,7 +87,7 @@ struct brcmf_fws_info; /* firmware signalling info */ struct brcmf_pub { /* Linkage ponters */ struct brcmf_bus *bus_if; - struct brcmf_proto *prot; + struct brcmf_proto *proto; struct brcmf_cfg80211_info *config; /* Internal brcmf items */ @@ -544,7 +96,7 @@ struct brcmf_pub { u8 wme_dp; /* wme discard priority */ /* Dongle media info */ - unsigned long drv_version; /* Version of dongle-resident driver */ + char fwver[BRCMF_DRIVER_FIRMWARE_VERSION_LEN]; u8 mac[ETH_ALEN]; /* MAC address obtained from dongle */ /* Multicast data packets sent to dongle */ @@ -566,14 +118,6 @@ struct brcmf_pub { #endif }; -struct brcmf_if_event { - u8 ifidx; - u8 action; - u8 flags; - u8 bssidx; - u8 role; -}; - /* forward declarations */ struct brcmf_cfg80211_vif; struct brcmf_fws_mac_descriptor; @@ -635,16 +179,6 @@ int brcmf_netdev_wait_pend8021x(struct net_device *ndev); /* Return pointer to interface name */ char *brcmf_ifname(struct brcmf_pub *drvr, int idx); -/* Query dongle */ -int brcmf_proto_cdc_query_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, - void *buf, uint len); -int brcmf_proto_cdc_set_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, - void *buf, uint len); - -/* Remove any protocol-specific data header. */ -int brcmf_proto_hdrpull(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx, - struct sk_buff *rxp); - int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked); struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx, char *name, u8 *mac_addr); @@ -655,4 +189,7 @@ u32 brcmf_get_chip_info(struct brcmf_if *ifp); void brcmf_txfinalize(struct brcmf_pub *drvr, struct sk_buff *txp, bool success); +/* Sets dongle media info (drv_version, mac address). */ +int brcmf_c_preinit_dcmds(struct brcmf_if *ifp); + #endif /* _BRCMF_H_ */ |