aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c')
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c264
1 files changed, 105 insertions, 159 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index f7eeee1dcdb6..2bf5dda29291 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -14,6 +14,8 @@
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/kthread.h>
@@ -40,7 +42,7 @@
#define DCMD_RESP_TIMEOUT 2000 /* In milli second */
-#ifdef BCMDBG
+#ifdef DEBUG
#define BRCMF_TRAP_INFO_SIZE 80
@@ -84,7 +86,7 @@ struct rte_console {
char cbuf[CBUF_LEN];
};
-#endif /* BCMDBG */
+#endif /* DEBUG */
#include <chipcommon.h>
#include "dhd_bus.h"
@@ -307,10 +309,10 @@ struct rte_console {
/* Flags for SDH calls */
#define F2SYNC (SDIO_REQ_4BYTE | SDIO_REQ_FIXED)
-#define BRCMFMAC_FW_NAME "brcm/brcmfmac.bin"
-#define BRCMFMAC_NV_NAME "brcm/brcmfmac.txt"
-MODULE_FIRMWARE(BRCMFMAC_FW_NAME);
-MODULE_FIRMWARE(BRCMFMAC_NV_NAME);
+#define BRCMF_SDIO_FW_NAME "brcm/brcmfmac-sdio.bin"
+#define BRCMF_SDIO_NV_NAME "brcm/brcmfmac-sdio.txt"
+MODULE_FIRMWARE(BRCMF_SDIO_FW_NAME);
+MODULE_FIRMWARE(BRCMF_SDIO_NV_NAME);
#define BRCMF_IDLE_IMMEDIATE (-1) /* Enter idle immediately */
#define BRCMF_IDLE_ACTIVE 0 /* Do not request any SD clock change
@@ -416,7 +418,7 @@ struct sdpcmd_regs {
u16 PAD[0x80];
};
-#ifdef BCMDBG
+#ifdef DEBUG
/* Device console log buffer state */
struct brcmf_console {
uint count; /* Poll interval msec counter */
@@ -426,7 +428,7 @@ struct brcmf_console {
u8 *buf; /* Log buffer (host copy) */
uint last; /* Last buffer read index */
};
-#endif /* BCMDBG */
+#endif /* DEBUG */
struct sdpcm_shared {
u32 flags;
@@ -507,11 +509,11 @@ struct brcmf_sdio {
uint polltick; /* Tick counter */
uint pollcnt; /* Count of active polls */
-#ifdef BCMDBG
+#ifdef DEBUG
uint console_interval;
struct brcmf_console console; /* Console output polling support */
uint console_addr; /* Console address from shared struct */
-#endif /* BCMDBG */
+#endif /* DEBUG */
uint regfails; /* Count of R_REG failures */
@@ -587,10 +589,10 @@ struct brcmf_sdio {
#define CLK_PENDING 2 /* Not used yet */
#define CLK_AVAIL 3
-#ifdef BCMDBG
+#ifdef DEBUG
static int qcount[NUMPRIO];
static int tx_packets[NUMPRIO];
-#endif /* BCMDBG */
+#endif /* DEBUG */
#define SDIO_DRIVE_STRENGTH 6 /* in milliamps */
@@ -764,12 +766,12 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
bus->clkstate = CLK_AVAIL;
brcmf_dbg(INFO, "CLKCTL: turned ON\n");
-#if defined(BCMDBG)
- if (bus->alp_only != true) {
+#if defined(DEBUG)
+ if (!bus->alp_only) {
if (SBSDIO_ALPONLY(clkctl))
brcmf_dbg(ERROR, "HT Clock should be on\n");
}
-#endif /* defined (BCMDBG) */
+#endif /* defined (DEBUG) */
bus->activity = true;
} else {
@@ -814,9 +816,9 @@ static int brcmf_sdbrcm_sdclk(struct brcmf_sdio *bus, bool on)
/* Transition SD and backplane clock readiness */
static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok)
{
-#ifdef BCMDBG
+#ifdef DEBUG
uint oldstate = bus->clkstate;
-#endif /* BCMDBG */
+#endif /* DEBUG */
brcmf_dbg(TRACE, "Enter\n");
@@ -861,9 +863,9 @@ static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok)
brcmf_sdbrcm_wd_timer(bus, 0);
break;
}
-#ifdef BCMDBG
+#ifdef DEBUG
brcmf_dbg(INFO, "%d -> %d\n", oldstate, bus->clkstate);
-#endif /* BCMDBG */
+#endif /* DEBUG */
return 0;
}
@@ -1279,13 +1281,10 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
}
return 0;
}
-#ifdef BCMDBG
- if (BRCMF_GLOM_ON()) {
- printk(KERN_DEBUG "SUPERFRAME:\n");
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
- pfirst->data, min_t(int, pfirst->len, 48));
- }
-#endif
+
+ brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
+ pfirst->data, min_t(int, pfirst->len, 48),
+ "SUPERFRAME:\n");
/* Validate the superframe header */
dptr = (u8 *) (pfirst->data);
@@ -1362,13 +1361,8 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
check = get_unaligned_le16(dptr + sizeof(u16));
chan = SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]);
doff = SDPCM_DOFFSET_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
-#ifdef BCMDBG
- if (BRCMF_GLOM_ON()) {
- printk(KERN_DEBUG "subframe:\n");
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
- dptr, 32);
- }
-#endif
+ brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
+ dptr, 32, "subframe:\n");
if ((u16)~(sublen ^ check)) {
brcmf_dbg(ERROR, "(subframe %d): HW hdr error: len/check 0x%04x/0x%04x\n",
@@ -1433,13 +1427,8 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
}
rxseq++;
-#ifdef BCMDBG
- if (BRCMF_BYTES_ON() && BRCMF_DATA_ON()) {
- printk(KERN_DEBUG "Rx Subframe Data:\n");
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
- dptr, dlen);
- }
-#endif
+ brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(),
+ dptr, dlen, "Rx Subframe Data:\n");
__skb_trim(pfirst, sublen);
skb_pull(pfirst, doff);
@@ -1457,17 +1446,13 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
continue;
}
-#ifdef BCMDBG
- if (BRCMF_GLOM_ON()) {
- brcmf_dbg(GLOM, "subframe %d to stack, %p (%p/%d) nxt/lnk %p/%p\n",
- bus->glom.qlen, pfirst, pfirst->data,
- pfirst->len, pfirst->next,
- pfirst->prev);
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
- pfirst->data,
- min_t(int, pfirst->len, 32));
- }
-#endif /* BCMDBG */
+ brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
+ pfirst->data,
+ min_t(int, pfirst->len, 32),
+ "subframe %d to stack, %p (%p/%d) nxt/lnk %p/%p\n",
+ bus->glom.qlen, pfirst, pfirst->data,
+ pfirst->len, pfirst->next,
+ pfirst->prev);
}
/* sent any remaining packets up */
if (bus->glom.qlen) {
@@ -1584,12 +1569,8 @@ brcmf_sdbrcm_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff)
gotpkt:
-#ifdef BCMDBG
- if (BRCMF_BYTES_ON() && BRCMF_CTL_ON()) {
- printk(KERN_DEBUG "RxCtrl:\n");
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, bus->rxctl, len);
- }
-#endif
+ brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_CTL_ON(),
+ bus->rxctl, len, "RxCtrl:\n");
/* Point to valid data and indicate its length */
bus->rxctl += doff;
@@ -1818,17 +1799,13 @@ brcmf_sdbrcm_readframes(struct brcmf_sdio *bus, uint maxframes, bool *finished)
}
bus->tx_max = txmax;
-#ifdef BCMDBG
- if (BRCMF_BYTES_ON() && BRCMF_DATA_ON()) {
- printk(KERN_DEBUG "Rx Data:\n");
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
- rxbuf, len);
- } else if (BRCMF_HDRS_ON()) {
- printk(KERN_DEBUG "RxHdr:\n");
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
- bus->rxhdr, SDPCM_HDRLEN);
- }
-#endif
+ brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(),
+ rxbuf, len, "Rx Data:\n");
+ brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() &&
+ BRCMF_DATA_ON()) &&
+ BRCMF_HDRS_ON(),
+ bus->rxhdr, SDPCM_HDRLEN,
+ "RxHdr:\n");
if (chan == SDPCM_CONTROL_CHANNEL) {
brcmf_dbg(ERROR, "(nextlen): readahead on control packet %d?\n",
@@ -1865,13 +1842,9 @@ brcmf_sdbrcm_readframes(struct brcmf_sdio *bus, uint maxframes, bool *finished)
brcmf_sdbrcm_rxfail(bus, true, true);
continue;
}
-#ifdef BCMDBG
- if (BRCMF_BYTES_ON() || BRCMF_HDRS_ON()) {
- printk(KERN_DEBUG "RxHdr:\n");
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
- bus->rxhdr, SDPCM_HDRLEN);
- }
-#endif
+ brcmf_dbg_hex_dump(BRCMF_BYTES_ON() || BRCMF_HDRS_ON(),
+ bus->rxhdr, SDPCM_HDRLEN, "RxHdr:\n");
+
/* Extract hardware header fields */
len = get_unaligned_le16(bus->rxhdr);
@@ -2024,13 +1997,8 @@ brcmf_sdbrcm_readframes(struct brcmf_sdio *bus, uint maxframes, bool *finished)
skb_push(pkt, BRCMF_FIRSTREAD);
memcpy(pkt->data, bus->rxhdr, BRCMF_FIRSTREAD);
-#ifdef BCMDBG
- if (BRCMF_BYTES_ON() && BRCMF_DATA_ON()) {
- printk(KERN_DEBUG "Rx Data:\n");
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
- pkt->data, len);
- }
-#endif
+ brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(),
+ pkt->data, len, "Rx Data:\n");
deliver:
/* Save superframe descriptor and allocate packet frame */
@@ -2038,14 +2006,9 @@ deliver:
if (SDPCM_GLOMDESC(&bus->rxhdr[SDPCM_FRAMETAG_LEN])) {
brcmf_dbg(GLOM, "glom descriptor, %d bytes:\n",
len);
-#ifdef BCMDBG
- if (BRCMF_GLOM_ON()) {
- printk(KERN_DEBUG "Glom Data:\n");
- print_hex_dump_bytes("",
- DUMP_PREFIX_OFFSET,
- pkt->data, len);
- }
-#endif
+ brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
+ pkt->data, len,
+ "Glom Data:\n");
__skb_trim(pkt, len);
skb_pull(pkt, SDPCM_HDRLEN);
bus->glomd = pkt;
@@ -2078,13 +2041,11 @@ deliver:
down(&bus->sdsem);
}
rxcount = maxframes - rxleft;
-#ifdef BCMDBG
/* Message if we hit the limit */
if (!rxleft)
brcmf_dbg(DATA, "hit rx limit of %d frames\n",
maxframes);
else
-#endif /* BCMDBG */
brcmf_dbg(DATA, "processed %d frames\n", rxcount);
/* Back off rxseq if awaiting rtx, update rx_seq */
if (bus->rxskip)
@@ -2098,8 +2059,7 @@ static void
brcmf_sdbrcm_wait_for_event(struct brcmf_sdio *bus, bool *lockvar)
{
up(&bus->sdsem);
- wait_event_interruptible_timeout(bus->ctrl_wait,
- (*lockvar == false), HZ * 2);
+ wait_event_interruptible_timeout(bus->ctrl_wait, !*lockvar, HZ * 2);
down(&bus->sdsem);
return;
}
@@ -2176,20 +2136,22 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt,
put_unaligned_le32(swheader, frame + SDPCM_FRAMETAG_LEN);
put_unaligned_le32(0, frame + SDPCM_FRAMETAG_LEN + sizeof(swheader));
-#ifdef BCMDBG
+#ifdef DEBUG
tx_packets[pkt->priority]++;
- if (BRCMF_BYTES_ON() &&
- (((BRCMF_CTL_ON() && (chan == SDPCM_CONTROL_CHANNEL)) ||
- (BRCMF_DATA_ON() && (chan != SDPCM_CONTROL_CHANNEL))))) {
- printk(KERN_DEBUG "Tx Frame:\n");
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, frame, len);
- } else if (BRCMF_HDRS_ON()) {
- printk(KERN_DEBUG "TxHdr:\n");
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
- frame, min_t(u16, len, 16));
- }
#endif
+ brcmf_dbg_hex_dump(BRCMF_BYTES_ON() &&
+ ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) ||
+ (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL)),
+ frame, len, "Tx Frame:\n");
+ brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() &&
+ ((BRCMF_CTL_ON() &&
+ chan == SDPCM_CONTROL_CHANNEL) ||
+ (BRCMF_DATA_ON() &&
+ chan != SDPCM_CONTROL_CHANNEL))) &&
+ BRCMF_HDRS_ON(),
+ frame, min_t(u16, len, 16), "TxHdr:\n");
+
/* Raise len to next SDIO block to eliminate tail command */
if (bus->roundup && bus->blocksize && (len > bus->blocksize)) {
u16 pad = bus->blocksize - (len % bus->blocksize);
@@ -2314,7 +2276,7 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev)
uint retries;
int err;
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
- struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv;
+ struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
struct brcmf_sdio *bus = sdiodev->bus;
brcmf_dbg(TRACE, "Enter\n");
@@ -2410,7 +2372,7 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
int err;
u8 clkctl, devctl = 0;
-#ifdef BCMDBG
+#ifdef DEBUG
/* Check for inconsistent device control */
devctl = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
SBSDIO_DEVICE_CTL, &err);
@@ -2418,7 +2380,7 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
brcmf_dbg(ERROR, "error reading DEVCTL: %d\n", err);
bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
}
-#endif /* BCMDBG */
+#endif /* DEBUG */
/* Read CSR, if clock on switch to AVAIL, else ignore */
clkctl = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
@@ -2664,7 +2626,7 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt)
int ret = -EBADE;
uint datalen, prec;
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
- struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv;
+ struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
struct brcmf_sdio *bus = sdiodev->bus;
brcmf_dbg(TRACE, "Enter\n");
@@ -2684,8 +2646,7 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt)
/* Priority based enq */
spin_lock_bh(&bus->txqlock);
- if (brcmf_c_prec_enq(bus->sdiodev->dev, &bus->txq, pkt, prec) ==
- false) {
+ if (!brcmf_c_prec_enq(bus->sdiodev->dev, &bus->txq, pkt, prec)) {
skb_pull(pkt, SDPCM_HDRLEN);
brcmf_txcomplete(bus->sdiodev->dev, pkt, false);
brcmu_pkt_buf_free_skb(pkt);
@@ -2701,7 +2662,7 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt)
brcmf_txflowcontrol(bus->sdiodev->dev, 0, ON);
}
-#ifdef BCMDBG
+#ifdef DEBUG
if (pktq_plen(&bus->txq, prec) > qcount[prec])
qcount[prec] = pktq_plen(&bus->txq, prec);
#endif
@@ -2774,7 +2735,7 @@ xfer_done:
return bcmerror;
}
-#ifdef BCMDBG
+#ifdef DEBUG
#define CONSOLE_LINE_MAX 192
static int brcmf_sdbrcm_readconsole(struct brcmf_sdio *bus)
@@ -2845,14 +2806,14 @@ static int brcmf_sdbrcm_readconsole(struct brcmf_sdio *bus)
if (line[n - 1] == '\r')
n--;
line[n] = 0;
- printk(KERN_DEBUG "CONSOLE: %s\n", line);
+ pr_debug("CONSOLE: %s\n", line);
}
}
break2:
return 0;
}
-#endif /* BCMDBG */
+#endif /* DEBUG */
static int brcmf_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len)
{
@@ -2906,7 +2867,7 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
u8 doff = 0;
int ret = -1;
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
- struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv;
+ struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
struct brcmf_sdio *bus = sdiodev->bus;
brcmf_dbg(TRACE, "Enter\n");
@@ -2972,7 +2933,7 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
brcmf_sdbrcm_wait_for_event(bus, &bus->ctrl_frame_stat);
- if (bus->ctrl_frame_stat == false) {
+ if (!bus->ctrl_frame_stat) {
brcmf_dbg(INFO, "ctrl_frame_stat == false\n");
ret = 0;
} else {
@@ -2982,17 +2943,11 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
}
if (ret == -1) {
-#ifdef BCMDBG
- if (BRCMF_BYTES_ON() && BRCMF_CTL_ON()) {
- printk(KERN_DEBUG "Tx Frame:\n");
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
- frame, len);
- } else if (BRCMF_HDRS_ON()) {
- printk(KERN_DEBUG "TxHdr:\n");
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
- frame, min_t(u16, len, 16));
- }
-#endif
+ brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_CTL_ON(),
+ frame, len, "Tx Frame:\n");
+ brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() && BRCMF_CTL_ON()) &&
+ BRCMF_HDRS_ON(),
+ frame, min_t(u16, len, 16), "TxHdr:\n");
do {
ret = brcmf_tx_frame(bus, frame, len);
@@ -3021,7 +2976,7 @@ brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen)
uint rxlen = 0;
bool pending;
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
- struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv;
+ struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
struct brcmf_sdio *bus = sdiodev->bus;
brcmf_dbg(TRACE, "Enter\n");
@@ -3040,7 +2995,7 @@ brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen)
rxlen, msglen);
} else if (timeleft == 0) {
brcmf_dbg(ERROR, "resumed on timeout\n");
- } else if (pending == true) {
+ } else if (pending) {
brcmf_dbg(CTL, "cancelled\n");
return -ERESTARTSYS;
} else {
@@ -3096,9 +3051,9 @@ static int brcmf_sdbrcm_write_vars(struct brcmf_sdio *bus)
u8 *vbuffer;
u32 varsizew;
__le32 varsizew_le;
-#ifdef BCMDBG
+#ifdef DEBUG
char *nvram_ularray;
-#endif /* BCMDBG */
+#endif /* DEBUG */
/* Even if there are no vars are to be written, we still
need to set the ramsize. */
@@ -3115,7 +3070,7 @@ static int brcmf_sdbrcm_write_vars(struct brcmf_sdio *bus)
/* Write the vars list */
bcmerror =
brcmf_sdbrcm_membytes(bus, true, varaddr, vbuffer, varsize);
-#ifdef BCMDBG
+#ifdef DEBUG
/* Verify NVRAM bytes */
brcmf_dbg(INFO, "Compare NVRAM dl & ul; varsize=%d\n", varsize);
nvram_ularray = kmalloc(varsize, GFP_ATOMIC);
@@ -3142,7 +3097,7 @@ static int brcmf_sdbrcm_write_vars(struct brcmf_sdio *bus)
brcmf_dbg(ERROR, "Download/Upload/Compare of NVRAM ok\n");
kfree(nvram_ularray);
-#endif /* BCMDBG */
+#endif /* DEBUG */
kfree(vbuffer);
}
@@ -3245,7 +3200,7 @@ static int brcmf_sdbrcm_download_code_file(struct brcmf_sdio *bus)
brcmf_dbg(INFO, "Enter\n");
- ret = request_firmware(&bus->firmware, BRCMFMAC_FW_NAME,
+ ret = request_firmware(&bus->firmware, BRCMF_SDIO_FW_NAME,
&bus->sdiodev->func[2]->dev);
if (ret) {
brcmf_dbg(ERROR, "Fail to request firmware %d\n", ret);
@@ -3342,7 +3297,7 @@ static int brcmf_sdbrcm_download_nvram(struct brcmf_sdio *bus)
char *bufp;
int ret;
- ret = request_firmware(&bus->firmware, BRCMFMAC_NV_NAME,
+ ret = request_firmware(&bus->firmware, BRCMF_SDIO_NV_NAME,
&bus->sdiodev->func[2]->dev);
if (ret) {
brcmf_dbg(ERROR, "Fail to request nvram %d\n", ret);
@@ -3432,7 +3387,7 @@ brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus)
static int brcmf_sdbrcm_bus_init(struct device *dev)
{
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
- struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv;
+ struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
struct brcmf_sdio *bus = sdiodev->bus;
unsigned long timeout;
uint retries = 0;
@@ -3507,16 +3462,12 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
SBSDIO_WATERMARK, 8, &err);
-
- /* Set bus state according to enable result */
- bus_if->state = BRCMF_BUS_DATA;
- }
-
- else {
+ } else {
/* Disable F2 again */
enable = SDIO_FUNC_ENABLE_1;
brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0,
SDIO_CCCR_IOEx, enable, NULL);
+ ret = -ENODEV;
}
/* Restore previous clock setting */
@@ -3524,7 +3475,7 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
SBSDIO_FUNC1_CHIPCLKCSR, saveclk, &err);
/* If we didn't come up, turn off backplane clock */
- if (bus_if->state != BRCMF_BUS_DATA)
+ if (!ret)
brcmf_sdbrcm_clkctl(bus, CLK_NONE, false);
exit:
@@ -3569,9 +3520,9 @@ void brcmf_sdbrcm_isr(void *arg)
static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
{
-#ifdef BCMDBG
+#ifdef DEBUG
struct brcmf_bus *bus_if = dev_get_drvdata(bus->sdiodev->dev);
-#endif /* BCMDBG */
+#endif /* DEBUG */
brcmf_dbg(TIMER, "Enter\n");
@@ -3616,7 +3567,7 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
/* Update interrupt tracking */
bus->lastintrs = bus->intrcount;
}
-#ifdef BCMDBG
+#ifdef DEBUG
/* Poll for console output periodically */
if (bus_if->state == BRCMF_BUS_DATA &&
bus->console_interval != 0) {
@@ -3630,7 +3581,7 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
bus->console_interval = 0;
}
}
-#endif /* BCMDBG */
+#endif /* DEBUG */
/* On idle timeout clear activity flag and/or turn off clock */
if ((bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) {
@@ -3721,11 +3672,8 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva)
if (brcmf_sdcard_set_sbaddr_window(bus->sdiodev, SI_ENUM_BASE))
brcmf_dbg(ERROR, "FAILED to return to SI_ENUM_BASE\n");
-#ifdef BCMDBG
- printk(KERN_DEBUG "F1 signature read @0x18000000=0x%4x\n",
- brcmf_sdcard_reg_read(bus->sdiodev, SI_ENUM_BASE, 4));
-
-#endif /* BCMDBG */
+ pr_debug("F1 signature read @0x18000000=0x%4x\n",
+ brcmf_sdcard_reg_read(bus->sdiodev, SI_ENUM_BASE, 4));
/*
* Force PLL off until brcmf_sdio_chip_attach()
@@ -3944,8 +3892,7 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
bus->watchdog_tsk = kthread_run(brcmf_sdbrcm_watchdog_thread,
bus, "brcmf_watchdog");
if (IS_ERR(bus->watchdog_tsk)) {
- printk(KERN_WARNING
- "brcmf_watchdog thread failed to start\n");
+ pr_warn("brcmf_watchdog thread failed to start\n");
bus->watchdog_tsk = NULL;
}
/* Initialize DPC thread */
@@ -3953,8 +3900,7 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
bus->dpc_tsk = kthread_run(brcmf_sdbrcm_dpc_thread,
bus, "brcmf_dpc");
if (IS_ERR(bus->dpc_tsk)) {
- printk(KERN_WARNING
- "brcmf_dpc thread failed to start\n");
+ pr_warn("brcmf_dpc thread failed to start\n");
bus->dpc_tsk = NULL;
}
@@ -4031,7 +3977,7 @@ void
brcmf_sdbrcm_wd_timer(struct brcmf_sdio *bus, uint wdtick)
{
/* Totally stop the timer */
- if (!wdtick && bus->wd_timer_valid == true) {
+ if (!wdtick && bus->wd_timer_valid) {
del_timer_sync(&bus->timer);
bus->wd_timer_valid = false;
bus->save_ms = wdtick;
@@ -4044,7 +3990,7 @@ brcmf_sdbrcm_wd_timer(struct brcmf_sdio *bus, uint wdtick)
if (wdtick) {
if (bus->save_ms != BRCMF_WD_POLL_MS) {
- if (bus->wd_timer_valid == true)
+ if (bus->wd_timer_valid)
/* Stop timer and restart at new value */
del_timer_sync(&bus->timer);