diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-4965-rs.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-4965-rs.c | 2713 |
1 files changed, 0 insertions, 2713 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c deleted file mode 100644 index 3ccb84aa5dbc..000000000000 --- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c +++ /dev/null @@ -1,2713 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * James P. Ketrenos <ipw2100-admin@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/skbuff.h> -#include <linux/wireless.h> -#include <net/mac80211.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/delay.h> - -#include <linux/workqueue.h> - -#include "../net/mac80211/rate.h" - -#include "iwl-dev.h" -#include "iwl-sta.h" -#include "iwl-core.h" -#include "iwl-helpers.h" - -#define RS_NAME "iwl-4965-rs" - -#define NUM_TRY_BEFORE_ANT_TOGGLE 1 -#define IWL_NUMBER_TRY 1 -#define IWL_HT_NUMBER_TRY 3 - -#define IWL_RATE_MAX_WINDOW 62 /* # tx in history window */ -#define IWL_RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */ -#define IWL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */ - -/* max time to accum history 2 seconds */ -#define IWL_RATE_SCALE_FLUSH_INTVL (2*HZ) - -static u8 rs_ht_to_legacy[] = { - IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, - IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, - IWL_RATE_6M_INDEX, - IWL_RATE_6M_INDEX, IWL_RATE_9M_INDEX, - IWL_RATE_12M_INDEX, IWL_RATE_18M_INDEX, - IWL_RATE_24M_INDEX, IWL_RATE_36M_INDEX, - IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX -}; - -static const u8 ant_toggle_lookup[] = { - /*ANT_NONE -> */ ANT_NONE, - /*ANT_A -> */ ANT_B, - /*ANT_B -> */ ANT_C, - /*ANT_AB -> */ ANT_BC, - /*ANT_C -> */ ANT_A, - /*ANT_AC -> */ ANT_AB, - /*ANT_BC -> */ ANT_AC, - /*ANT_ABC -> */ ANT_ABC, -}; - -/** - * struct iwl4965_rate_scale_data -- tx success history for one rate - */ -struct iwl4965_rate_scale_data { - u64 data; /* bitmap of successful frames */ - s32 success_counter; /* number of frames successful */ - s32 success_ratio; /* per-cent * 128 */ - s32 counter; /* number of frames attempted */ - s32 average_tpt; /* success ratio * expected throughput */ - unsigned long stamp; -}; - -/** - * struct iwl4965_scale_tbl_info -- tx params and success history for all rates - * - * There are two of these in struct iwl4965_lq_sta, - * one for "active", and one for "search". - */ -struct iwl4965_scale_tbl_info { - enum iwl_table_type lq_type; - u8 ant_type; - u8 is_SGI; /* 1 = short guard interval */ - u8 is_fat; /* 1 = 40 MHz channel width */ - u8 is_dup; /* 1 = duplicated data streams */ - u8 action; /* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */ - s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */ - u32 current_rate; /* rate_n_flags, uCode API format */ - struct iwl4965_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */ -}; - -struct iwl4965_traffic_load { - unsigned long time_stamp; /* age of the oldest statistics */ - u32 packet_count[TID_QUEUE_MAX_SIZE]; /* packet count in this time - * slice */ - u32 total; /* total num of packets during the - * last TID_MAX_TIME_DIFF */ - u8 queue_count; /* number of queues that has - * been used since the last cleanup */ - u8 head; /* start of the circular buffer */ -}; - -/** - * struct iwl4965_lq_sta -- driver's rate scaling private structure - * - * Pointer to this gets passed back and forth between driver and mac80211. - */ -struct iwl4965_lq_sta { - u8 active_tbl; /* index of active table, range 0-1 */ - u8 enable_counter; /* indicates HT mode */ - u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */ - u8 search_better_tbl; /* 1: currently trying alternate mode */ - s32 last_tpt; - - /* The following determine when to search for a new mode */ - u32 table_count_limit; - u32 max_failure_limit; /* # failed frames before new search */ - u32 max_success_limit; /* # successful frames before new search */ - u32 table_count; - u32 total_failed; /* total failed frames, any/all rates */ - u32 total_success; /* total successful frames, any/all rates */ - u32 flush_timer; /* time staying in mode before new search */ - - u8 action_counter; /* # mode-switch actions tried */ - u8 is_green; - u8 is_dup; - enum ieee80211_band band; - u8 ibss_sta_added; - - /* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */ - u32 supp_rates; - u16 active_legacy_rate; - u16 active_siso_rate; - u16 active_mimo2_rate; - u16 active_mimo3_rate; - u16 active_rate_basic; - - struct iwl_link_quality_cmd lq; - struct iwl4965_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */ - struct iwl4965_traffic_load load[TID_MAX_LOAD_COUNT]; - u8 tx_agg_tid_en; -#ifdef CONFIG_MAC80211_DEBUGFS - struct dentry *rs_sta_dbgfs_scale_table_file; - struct dentry *rs_sta_dbgfs_stats_table_file; - struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file; - u32 dbg_fixed_rate; -#endif - struct iwl_priv *drv; -}; - -static void rs_rate_scale_perform(struct iwl_priv *priv, - struct net_device *dev, - struct ieee80211_hdr *hdr, - struct sta_info *sta); -static void rs_fill_link_cmd(const struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - u32 rate_n_flags); - - -#ifdef CONFIG_MAC80211_DEBUGFS -static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta, - u32 *rate_n_flags, int index); -#else -static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta, - u32 *rate_n_flags, int index) -{} -#endif - -/* - * Expected throughput metrics for following rates: - * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits - * "G" is the only table that supports CCK (the first 4 rates). - */ -/*FIXME:RS:need to spearate tables for MIMO2/MIMO3*/ -static s32 expected_tpt_A[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186, 186 -}; - -static s32 expected_tpt_G[IWL_RATE_COUNT] = { - 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 186 -}; - -static s32 expected_tpt_siso20MHz[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 42, 42, 76, 102, 124, 159, 183, 193, 202 -}; - -static s32 expected_tpt_siso20MHzSGI[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 46, 46, 82, 110, 132, 168, 192, 202, 211 -}; - -static s32 expected_tpt_mimo20MHz[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 74, 74, 123, 155, 179, 214, 236, 244, 251 -}; - -static s32 expected_tpt_mimo20MHzSGI[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 81, 81, 131, 164, 188, 222, 243, 251, 257 -}; - -static s32 expected_tpt_siso40MHz[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 77, 77, 127, 160, 184, 220, 242, 250, 257 -}; - -static s32 expected_tpt_siso40MHzSGI[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 83, 83, 135, 169, 193, 229, 250, 257, 264 -}; - -static s32 expected_tpt_mimo40MHz[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 123, 123, 182, 214, 235, 264, 279, 285, 289 -}; - -static s32 expected_tpt_mimo40MHzSGI[IWL_RATE_COUNT] = { - 0, 0, 0, 0, 131, 131, 191, 222, 242, 270, 284, 289, 293 -}; - -static inline u8 rs_extract_rate(u32 rate_n_flags) -{ - return (u8)(rate_n_flags & 0xFF); -} - -static void rs_rate_scale_clear_window(struct iwl4965_rate_scale_data *window) -{ - window->data = 0; - window->success_counter = 0; - window->success_ratio = IWL_INVALID_VALUE; - window->counter = 0; - window->average_tpt = IWL_INVALID_VALUE; - window->stamp = 0; -} - -static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type) -{ - return ((ant_type & valid_antenna) == ant_type); -} - -/* - * removes the old data from the statistics. All data that is older than - * TID_MAX_TIME_DIFF, will be deleted. - */ -static void rs_tl_rm_old_stats(struct iwl4965_traffic_load *tl, u32 curr_time) -{ - /* The oldest age we want to keep */ - u32 oldest_time = curr_time - TID_MAX_TIME_DIFF; - - while (tl->queue_count && - (tl->time_stamp < oldest_time)) { - tl->total -= tl->packet_count[tl->head]; - tl->packet_count[tl->head] = 0; - tl->time_stamp += TID_QUEUE_CELL_SPACING; - tl->queue_count--; - tl->head++; - if (tl->head >= TID_QUEUE_MAX_SIZE) - tl->head = 0; - } -} - -/* - * increment traffic load value for tid and also remove - * any old values if passed the certain time period - */ -static u8 rs_tl_add_packet(struct iwl4965_lq_sta *lq_data, - struct ieee80211_hdr *hdr) -{ - u32 curr_time = jiffies_to_msecs(jiffies); - u32 time_diff; - s32 index; - struct iwl4965_traffic_load *tl = NULL; - __le16 fc = hdr->frame_control; - u8 tid; - - if (ieee80211_is_data_qos(fc)) { - u8 *qc = ieee80211_get_qos_ctl(hdr); - tid = qc[0] & 0xf; - } else - return MAX_TID_COUNT; - - tl = &lq_data->load[tid]; - - curr_time -= curr_time % TID_ROUND_VALUE; - - /* Happens only for the first packet. Initialize the data */ - if (!(tl->queue_count)) { - tl->total = 1; - tl->time_stamp = curr_time; - tl->queue_count = 1; - tl->head = 0; - tl->packet_count[0] = 1; - return MAX_TID_COUNT; - } - - time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); - index = time_diff / TID_QUEUE_CELL_SPACING; - - /* The history is too long: remove data that is older than */ - /* TID_MAX_TIME_DIFF */ - if (index >= TID_QUEUE_MAX_SIZE) - rs_tl_rm_old_stats(tl, curr_time); - - index = (tl->head + index) % TID_QUEUE_MAX_SIZE; - tl->packet_count[index] = tl->packet_count[index] + 1; - tl->total = tl->total + 1; - - if ((index + 1) > tl->queue_count) - tl->queue_count = index + 1; - - return tid; -} - -/* - get the traffic load value for tid -*/ -static u32 rs_tl_get_load(struct iwl4965_lq_sta *lq_data, u8 tid) -{ - u32 curr_time = jiffies_to_msecs(jiffies); - u32 time_diff; - s32 index; - struct iwl4965_traffic_load *tl = NULL; - - if (tid >= TID_MAX_LOAD_COUNT) - return 0; - - tl = &(lq_data->load[tid]); - - curr_time -= curr_time % TID_ROUND_VALUE; - - if (!(tl->queue_count)) - return 0; - - time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); - index = time_diff / TID_QUEUE_CELL_SPACING; - - /* The history is too long: remove data that is older than */ - /* TID_MAX_TIME_DIFF */ - if (index >= TID_QUEUE_MAX_SIZE) - rs_tl_rm_old_stats(tl, curr_time); - - return tl->total; -} - -static void rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_data, u8 tid, - struct sta_info *sta) -{ - unsigned long state; - DECLARE_MAC_BUF(mac); - - spin_lock_bh(&sta->lock); - state = sta->ampdu_mlme.tid_state_tx[tid]; - spin_unlock_bh(&sta->lock); - - if (state == HT_AGG_STATE_IDLE && - rs_tl_get_load(lq_data, tid) > IWL_AGG_LOAD_THRESHOLD) { - IWL_DEBUG_HT("Starting Tx agg: STA: %s tid: %d\n", - print_mac(mac, sta->addr), tid); - ieee80211_start_tx_ba_session(priv->hw, sta->addr, tid); - } -} - -static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid, - struct iwl4965_lq_sta *lq_data, - struct sta_info *sta) -{ - if ((tid < TID_MAX_LOAD_COUNT)) - rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta); - else if (tid == IWL_AGG_ALL_TID) - for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++) - rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta); -} - -static inline int get_num_of_ant_from_rate(u32 rate_n_flags) -{ - return (!!(rate_n_flags & RATE_MCS_ANT_A_MSK) + - !!(rate_n_flags & RATE_MCS_ANT_B_MSK) + - !!(rate_n_flags & RATE_MCS_ANT_C_MSK)); -} - -/** - * rs_collect_tx_data - Update the success/failure sliding window - * - * We keep a sliding window of the last 62 packets transmitted - * at this rate. window->data contains the bitmask of successful - * packets. - */ -static int rs_collect_tx_data(struct iwl4965_rate_scale_data *windows, - int scale_index, s32 tpt, int retries, - int successes) -{ - struct iwl4965_rate_scale_data *window = NULL; - static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1)); - s32 fail_count; - - if (scale_index < 0 || scale_index >= IWL_RATE_COUNT) - return -EINVAL; - - /* Select data for current tx bit rate */ - window = &(windows[scale_index]); - - /* - * Keep track of only the latest 62 tx frame attempts in this rate's - * history window; anything older isn't really relevant any more. - * If we have filled up the sliding window, drop the oldest attempt; - * if the oldest attempt (highest bit in bitmap) shows "success", - * subtract "1" from the success counter (this is the main reason - * we keep these bitmaps!). - */ - while (retries > 0) { - if (window->counter >= IWL_RATE_MAX_WINDOW) { - - /* remove earliest */ - window->counter = IWL_RATE_MAX_WINDOW - 1; - - if (window->data & mask) { - window->data &= ~mask; - window->success_counter--; - } - } - - /* Increment frames-attempted counter */ - window->counter++; - - /* Shift bitmap by one frame (throw away oldest history), - * OR in "1", and increment "success" if this - * frame was successful. */ - window->data <<= 1;; - if (successes > 0) { - window->success_counter++; - window->data |= 0x1; - successes--; - } - - retries--; - } - - /* Calculate current success ratio, avoid divide-by-0! */ - if (window->counter > 0) - window->success_ratio = 128 * (100 * window->success_counter) - / window->counter; - else - window->success_ratio = IWL_INVALID_VALUE; - - fail_count = window->counter - window->success_counter; - - /* Calculate average throughput, if we have enough history. */ - if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) || - (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH)) - window->average_tpt = (window->success_ratio * tpt + 64) / 128; - else - window->average_tpt = IWL_INVALID_VALUE; - - /* Tag this window as having been updated */ - window->stamp = jiffies; - - return 0; -} - -/* - * Fill uCode API rate_n_flags field, based on "search" or "active" table. - */ -/* FIXME:RS:remove this function and put the flags statically in the table */ -static u32 rate_n_flags_from_tbl(struct iwl4965_scale_tbl_info *tbl, - int index, u8 use_green) -{ - u32 rate_n_flags = 0; - - if (is_legacy(tbl->lq_type)) { - rate_n_flags = iwl_rates[index].plcp; - if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE) - rate_n_flags |= RATE_MCS_CCK_MSK; - - } else if (is_Ht(tbl->lq_type)) { - if (index > IWL_LAST_OFDM_RATE) { - IWL_ERROR("invalid HT rate index %d\n", index); - index = IWL_LAST_OFDM_RATE; - } - rate_n_flags = RATE_MCS_HT_MSK; - - if (is_siso(tbl->lq_type)) - rate_n_flags |= iwl_rates[index].plcp_siso; - else if (is_mimo2(tbl->lq_type)) - rate_n_flags |= iwl_rates[index].plcp_mimo2; - else - rate_n_flags |= iwl_rates[index].plcp_mimo3; - } else { - IWL_ERROR("Invalid tbl->lq_type %d\n", tbl->lq_type); - } - - rate_n_flags |= ((tbl->ant_type << RATE_MCS_ANT_POS) & - RATE_MCS_ANT_ABC_MSK); - - if (is_Ht(tbl->lq_type)) { - if (tbl->is_fat) { - if (tbl->is_dup) - rate_n_flags |= RATE_MCS_DUP_MSK; - else - rate_n_flags |= RATE_MCS_FAT_MSK; - } - if (tbl->is_SGI) - rate_n_flags |= RATE_MCS_SGI_MSK; - - if (use_green) { - rate_n_flags |= RATE_MCS_GF_MSK; - if (is_siso(tbl->lq_type) && tbl->is_SGI) { - rate_n_flags &= ~RATE_MCS_SGI_MSK; - IWL_ERROR("GF was set with SGI:SISO\n"); - } - } - } - return rate_n_flags; -} - -/* - * Interpret uCode API's rate_n_flags format, - * fill "search" or "active" tx mode table. - */ -static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags, - enum ieee80211_band band, - struct iwl4965_scale_tbl_info *tbl, - int *rate_idx) -{ - u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK); - u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags); - u8 mcs; - - *rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags); - - if (*rate_idx == IWL_RATE_INVALID) { - *rate_idx = -1; - return -EINVAL; - } - tbl->is_SGI = 0; /* default legacy setup */ - tbl->is_fat = 0; - tbl->is_dup = 0; - tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS); - tbl->lq_type = LQ_NONE; - - /* legacy rate format */ - if (!(rate_n_flags & RATE_MCS_HT_MSK)) { - if (num_of_ant == 1) { - if (band == IEEE80211_BAND_5GHZ) - tbl->lq_type = LQ_A; - else - tbl->lq_type = LQ_G; - } - /* HT rate format */ - } else { - if (rate_n_flags & RATE_MCS_SGI_MSK) - tbl->is_SGI = 1; - - if ((rate_n_flags & RATE_MCS_FAT_MSK) || - (rate_n_flags & RATE_MCS_DUP_MSK)) - tbl->is_fat = 1; - - if (rate_n_flags & RATE_MCS_DUP_MSK) - tbl->is_dup = 1; - - mcs = rs_extract_rate(rate_n_flags); - - /* SISO */ - if (mcs <= IWL_RATE_SISO_60M_PLCP) { - if (num_of_ant == 1) - tbl->lq_type = LQ_SISO; /*else NONE*/ - /* MIMO2 */ - } else if (mcs <= IWL_RATE_MIMO2_60M_PLCP) { - if (num_of_ant == 2) - tbl->lq_type = LQ_MIMO2; - /* MIMO3 */ - } else { - if (num_of_ant == 3) - tbl->lq_type = LQ_MIMO3; - } - } - return 0; -} - -/* switch to another antenna/antennas and return 1 */ -/* if no other valid antenna found, return 0 */ -static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags, - struct iwl4965_scale_tbl_info *tbl) -{ - u8 new_ant_type; - - if (!tbl->ant_type || tbl->ant_type > ANT_ABC) - return 0; - - if (!rs_is_valid_ant(valid_ant, tbl->ant_type)) - return 0; - - new_ant_type = ant_toggle_lookup[tbl->ant_type]; - - while ((new_ant_type != tbl->ant_type) && - !rs_is_valid_ant(valid_ant, new_ant_type)) - new_ant_type = ant_toggle_lookup[new_ant_type]; - - if (new_ant_type == tbl->ant_type) - return 0; - - tbl->ant_type = new_ant_type; - *rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK; - *rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS; - return 1; -} - -/* FIXME:RS: in 4965 we don't use greenfield at all */ -/* FIXME:RS: don't use greenfield for now in TX */ -#if 0 -static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf) -{ - return ((conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) && - priv->current_ht_config.is_green_field && - !priv->current_ht_config.non_GF_STA_present); -} -#endif -static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf) -{ - return 0; -} - -/** - * rs_get_supported_rates - get the available rates - * - * if management frame or broadcast frame only return - * basic available rates. - * - */ -static u16 rs_get_supported_rates(struct iwl4965_lq_sta *lq_sta, - struct ieee80211_hdr *hdr, - enum iwl_table_type rate_type) -{ - if (hdr && is_multicast_ether_addr(hdr->addr1) && - lq_sta->active_rate_basic) - return lq_sta->active_rate_basic; - - if (is_legacy(rate_type)) { - return lq_sta->active_legacy_rate; - } else { - if (is_siso(rate_type)) - return lq_sta->active_siso_rate; - else if (is_mimo2(rate_type)) - return lq_sta->active_mimo2_rate; - else - return lq_sta->active_mimo3_rate; - } -} - -static u16 rs_get_adjacent_rate(struct iwl_priv *priv, u8 index, u16 rate_mask, - int rate_type) -{ - u8 high = IWL_RATE_INVALID; - u8 low = IWL_RATE_INVALID; - - /* 802.11A or ht walks to the next literal adjacent rate in - * the rate table */ - if (is_a_band(rate_type) || !is_legacy(rate_type)) { - int i; - u32 mask; - - /* Find the previous rate that is in the rate mask */ - i = index - 1; - for (mask = (1 << i); i >= 0; i--, mask >>= 1) { - if (rate_mask & mask) { - low = i; - break; - } - } - - /* Find the next rate that is in the rate mask */ - i = index + 1; - for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) { - if (rate_mask & mask) { - high = i; - break; - } - } - - return (high << 8) | low; - } - - low = index; - while (low != IWL_RATE_INVALID) { - low = iwl_rates[low].prev_rs; - if (low == IWL_RATE_INVALID) - break; - if (rate_mask & (1 << low)) - break; - IWL_DEBUG_RATE("Skipping masked lower rate: %d\n", low); - } - - high = index; - while (high != IWL_RATE_INVALID) { - high = iwl_rates[high].next_rs; - if (high == IWL_RATE_INVALID) - break; - if (rate_mask & (1 << high)) - break; - IWL_DEBUG_RATE("Skipping masked higher rate: %d\n", high); - } - - return (high << 8) | low; -} - -static u32 rs_get_lower_rate(struct iwl4965_lq_sta *lq_sta, - struct iwl4965_scale_tbl_info *tbl, u8 scale_index, - u8 ht_possible) -{ - s32 low; - u16 rate_mask; - u16 high_low; - u8 switch_to_legacy = 0; - u8 is_green = lq_sta->is_green; - - /* check if we need to switch from HT to legacy rates. - * assumption is that mandatory rates (1Mbps or 6Mbps) - * are always supported (spec demand) */ - if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) { - switch_to_legacy = 1; - scale_index = rs_ht_to_legacy[scale_index]; - if (lq_sta->band == IEEE80211_BAND_5GHZ) - tbl->lq_type = LQ_A; - else - tbl->lq_type = LQ_G; - - if (num_of_ant(tbl->ant_type) > 1) - tbl->ant_type = ANT_A;/*FIXME:RS*/ - - tbl->is_fat = 0; - tbl->is_SGI = 0; - } - - rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type); - - /* Mask with station rate restriction */ - if (is_legacy(tbl->lq_type)) { - /* supp_rates has no CCK bits in A mode */ - if (lq_sta->band == IEEE80211_BAND_5GHZ) - rate_mask = (u16)(rate_mask & - (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); - else - rate_mask = (u16)(rate_mask & lq_sta->supp_rates); - } - - /* If we switched from HT to legacy, check current rate */ - if (switch_to_legacy && (rate_mask & (1 << scale_index))) { - low = scale_index; - goto out; - } - - high_low = rs_get_adjacent_rate(lq_sta->drv, scale_index, rate_mask, - tbl->lq_type); - low = high_low & 0xff; - - if (low == IWL_RATE_INVALID) - low = scale_index; - -out: - return rate_n_flags_from_tbl(tbl, low, is_green); -} - -/* - * mac80211 sends us Tx status - */ -static void rs_tx_status(void *priv_rate, struct net_device *dev, - struct sk_buff *skb) -{ - int status; - u8 retries; - int rs_index, index = 0; - struct iwl4965_lq_sta *lq_sta; - struct iwl_link_quality_cmd *table; - struct sta_info *sta; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct iwl_priv *priv = (struct iwl_priv *)priv_rate; - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_hw *hw = local_to_hw(local); - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct iwl4965_rate_scale_data *window = NULL; - struct iwl4965_rate_scale_data *search_win = NULL; - u32 tx_rate; - struct iwl4965_scale_tbl_info tbl_type; - struct iwl4965_scale_tbl_info *curr_tbl, *search_tbl; - u8 active_index = 0; - __le16 fc = hdr->frame_control; - s32 tpt = 0; - - IWL_DEBUG_RATE_LIMIT("get frame ack response, update rate scale window\n"); - - if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1)) - return; - - /* This packet was aggregated but doesn't carry rate scale info */ - if ((info->flags & IEEE80211_TX_CTL_AMPDU) && - !(info->flags & IEEE80211_TX_STAT_AMPDU)) - return; - - retries = info->status.retry_count; - - if (retries > 15) - retries = 15; - - rcu_read_lock(); - - sta = sta_info_get(local, hdr->addr1); - - if (!sta || !sta->rate_ctrl_priv) - goto out; - - - lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv; - - if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && - !lq_sta->ibss_sta_added) - goto out; - - table = &lq_sta->lq; - active_index = lq_sta->active_tbl; - - curr_tbl = &(lq_sta->lq_info[active_index]); - search_tbl = &(lq_sta->lq_info[(1 - active_index)]); - window = (struct iwl4965_rate_scale_data *) - &(curr_tbl->win[0]); - search_win = (struct iwl4965_rate_scale_data *) - &(search_tbl->win[0]); - - /* - * Ignore this Tx frame response if its initial rate doesn't match - * that of latest Link Quality command. There may be stragglers - * from a previous Link Quality command, but we're no longer interested - * in those; they're either from the "active" mode while we're trying - * to check "search" mode, or a prior "search" mode after we've moved - * to a new "search" mode (which might become the new "active" mode). - */ - tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags); - rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index); - if (priv->band == IEEE80211_BAND_5GHZ) - rs_index -= IWL_FIRST_OFDM_RATE; - - if ((info->tx_rate_idx < 0) || - (tbl_type.is_SGI ^ - !!(info->flags & IEEE80211_TX_CTL_SHORT_GI)) || - (tbl_type.is_fat ^ - !!(info->flags & IEEE80211_TX_CTL_40_MHZ_WIDTH)) || - (tbl_type.is_dup ^ - !!(info->flags & IEEE80211_TX_CTL_DUP_DATA)) || - (tbl_type.ant_type ^ info->antenna_sel_tx) || - (!!(tx_rate & RATE_MCS_HT_MSK) ^ - !!(info->flags & IEEE80211_TX_CTL_OFDM_HT)) || - (!!(tx_rate & RATE_MCS_GF_MSK) ^ - !!(info->flags & IEEE80211_TX_CTL_GREEN_FIELD)) || - (hw->wiphy->bands[priv->band]->bitrates[rs_index].bitrate != - hw->wiphy->bands[info->band]->bitrates[info->tx_rate_idx].bitrate)) { - IWL_DEBUG_RATE("initial rate does not match 0x%x\n", tx_rate); - goto out; - } - - /* Update frame history window with "failure" for each Tx retry. */ - while (retries) { - /* Look up the rate and other info used for each tx attempt. - * Each tx attempt steps one entry deeper in the rate table. */ - tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags); - rs_get_tbl_info_from_mcs(tx_rate, priv->band, - &tbl_type, &rs_index); - - /* If type matches "search" table, - * add failure to "search" history */ - if ((tbl_type.lq_type == search_tbl->lq_type) && - (tbl_type.ant_type == search_tbl->ant_type) && - (tbl_type.is_SGI == search_tbl->is_SGI)) { - if (search_tbl->expected_tpt) - tpt = search_tbl->expected_tpt[rs_index]; - else - tpt = 0; - rs_collect_tx_data(search_win, rs_index, tpt, 1, 0); - - /* Else if type matches "current/active" table, - * add failure to "current/active" history */ - } else if ((tbl_type.lq_type == curr_tbl->lq_type) && - (tbl_type.ant_type == curr_tbl->ant_type) && - (tbl_type.is_SGI == curr_tbl->is_SGI)) { - if (curr_tbl->expected_tpt) - tpt = curr_tbl->expected_tpt[rs_index]; - else - tpt = 0; - rs_collect_tx_data(window, rs_index, tpt, 1, 0); - } - - /* If not searching for a new mode, increment failed counter - * ... this helps determine when to start searching again */ - if (lq_sta->stay_in_tbl) - lq_sta->total_failed++; - --retries; - index++; - - } - - /* - * Find (by rate) the history window to update with final Tx attempt; - * if Tx was successful first try, use original rate, - * else look up the rate that was, finally, successful. - */ - tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags); - rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index); - - /* Update frame history window with "success" if Tx got ACKed ... */ - status = !!(info->flags & IEEE80211_TX_STAT_ACK); - - /* If type matches "search" table, - * add final tx status to "search" history */ - if ((tbl_type.lq_type == search_tbl->lq_type) && - (tbl_type.ant_type == search_tbl->ant_type) && - (tbl_type.is_SGI == search_tbl->is_SGI)) { - if (search_tbl->expected_tpt) - tpt = search_tbl->expected_tpt[rs_index]; - else - tpt = 0; - if (info->flags & IEEE80211_TX_CTL_AMPDU) - rs_collect_tx_data(search_win, rs_index, tpt, - info->status.ampdu_ack_len, - info->status.ampdu_ack_map); - else - rs_collect_tx_data(search_win, rs_index, tpt, - 1, status); - /* Else if type matches "current/active" table, - * add final tx status to "current/active" history */ - } else if ((tbl_type.lq_type == curr_tbl->lq_type) && - (tbl_type.ant_type == curr_tbl->ant_type) && - (tbl_type.is_SGI == curr_tbl->is_SGI)) { - if (curr_tbl->expected_tpt) - tpt = curr_tbl->expected_tpt[rs_index]; - else - tpt = 0; - if (info->flags & IEEE80211_TX_CTL_AMPDU) - rs_collect_tx_data(window, rs_index, tpt, - info->status.ampdu_ack_len, - info->status.ampdu_ack_map); - else - rs_collect_tx_data(window, rs_index, tpt, - 1, status); - } - - /* If not searching for new mode, increment success/failed counter - * ... these help determine when to start searching again */ - if (lq_sta->stay_in_tbl) { - if (info->flags & IEEE80211_TX_CTL_AMPDU) { - lq_sta->total_success += info->status.ampdu_ack_map; - lq_sta->total_failed += - (info->status.ampdu_ack_len - info->status.ampdu_ack_map); - } else { - if (status) - lq_sta->total_success++; - else - lq_sta->total_failed++; - } - } - - /* See if there's a better rate or modulation mode to try. */ - rs_rate_scale_perform(priv, dev, hdr, sta); -out: - rcu_read_unlock(); - return; -} - -/* - * Begin a period of staying with a selected modulation mode. - * Set "stay_in_tbl" flag to prevent any mode switches. - * Set frame tx success limits according to legacy vs. high-throughput, - * and reset overall (spanning all rates) tx success history statistics. - * These control how long we stay using same modulation mode before - * searching for a new mode. - */ -static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy, - struct iwl4965_lq_sta *lq_sta) -{ - IWL_DEBUG_RATE("we are staying in the same table\n"); - lq_sta->stay_in_tbl = 1; /* only place this gets set */ - if (is_legacy) { - lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT; - lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT; - lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT; - } else { - lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT; - lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT; - lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT; - } - lq_sta->table_count = 0; - lq_sta->total_failed = 0; - lq_sta->total_success = 0; -} - -/* - * Find correct throughput table for given mode of modulation - */ -static void rs_set_expected_tpt_table(struct iwl4965_lq_sta *lq_sta, - struct iwl4965_scale_tbl_info *tbl) -{ - if (is_legacy(tbl->lq_type)) { - if (!is_a_band(tbl->lq_type)) - tbl->expected_tpt = expected_tpt_G; - else - tbl->expected_tpt = expected_tpt_A; - } else if (is_siso(tbl->lq_type)) { - if (tbl->is_fat && !lq_sta->is_dup) - if (tbl->is_SGI) - tbl->expected_tpt = expected_tpt_siso40MHzSGI; - else - tbl->expected_tpt = expected_tpt_siso40MHz; - else if (tbl->is_SGI) - tbl->expected_tpt = expected_tpt_siso20MHzSGI; - else - tbl->expected_tpt = expected_tpt_siso20MHz; - - } else if (is_mimo(tbl->lq_type)) { /* FIXME:need to separate mimo2/3 */ - if (tbl->is_fat && !lq_sta->is_dup) - if (tbl->is_SGI) - tbl->expected_tpt = expected_tpt_mimo40MHzSGI; - else - tbl->expected_tpt = expected_tpt_mimo40MHz; - else if (tbl->is_SGI) - tbl->expected_tpt = expected_tpt_mimo20MHzSGI; - else - tbl->expected_tpt = expected_tpt_mimo20MHz; - } else - tbl->expected_tpt = expected_tpt_G; -} - -/* - * Find starting rate for new "search" high-throughput mode of modulation. - * Goal is to find lowest expected rate (under perfect conditions) that is - * above the current measured throughput of "active" mode, to give new mode - * a fair chance to prove itself without too many challenges. - * - * This gets called when transitioning to more aggressive modulation - * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive - * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need - * to decrease to match "active" throughput. When moving from MIMO to SISO, - * bit rate will typically need to increase, but not if performance was bad. - */ -static s32 rs_get_best_rate(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - struct iwl4965_scale_tbl_info *tbl, /* "search" */ - u16 rate_mask, s8 index) -{ - /* "active" values */ - struct iwl4965_scale_tbl_info *active_tbl = - &(lq_sta->lq_info[lq_sta->active_tbl]); - s32 active_sr = active_tbl->win[index].success_ratio; - s32 active_tpt = active_tbl->expected_tpt[index]; - - /* expected "search" throughput */ - s32 *tpt_tbl = tbl->expected_tpt; - - s32 new_rate, high, low, start_hi; - u16 high_low; - s8 rate = index; - - new_rate = high = low = start_hi = IWL_RATE_INVALID; - - for (; ;) { - high_low = rs_get_adjacent_rate(priv, rate, rate_mask, - tbl->lq_type); - - low = high_low & 0xff; - high = (high_low >> 8) & 0xff; - - /* - * Lower the "search" bit rate, to give new "search" mode - * approximately the same throughput as "active" if: - * - * 1) "Active" mode has been working modestly well (but not - * great), and expected "search" throughput (under perfect - * conditions) at candidate rate is above the actual - * measured "active" throughput (but less than expected - * "active" throughput under perfect conditions). - * OR - * 2) "Active" mode has been working perfectly or very well - * and expected "search" throughput (under perfect - * conditions) at candidate rate is above expected - * "active" throughput (under perfect conditions). - */ - if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) && - ((active_sr > IWL_RATE_DECREASE_TH) && - (active_sr <= IWL_RATE_HIGH_TH) && - (tpt_tbl[rate] <= active_tpt))) || - ((active_sr >= IWL_RATE_SCALE_SWITCH) && - (tpt_tbl[rate] > active_tpt))) { - - /* (2nd or later pass) - * If we've already tried to raise the rate, and are - * now trying to lower it, use the higher rate. */ - if (start_hi != IWL_RATE_INVALID) { - new_rate = start_hi; - break; - } - - new_rate = rate; - - /* Loop again with lower rate */ - if (low != IWL_RATE_INVALID) - rate = low; - - /* Lower rate not available, use the original */ - else - break; - - /* Else try to raise the "search" rate to match "active" */ - } else { - /* (2nd or later pass) - * If we've already tried to lower the rate, and are - * now trying to raise it, use the lower rate. */ - if (new_rate != IWL_RATE_INVALID) - break; - - /* Loop again with higher rate */ - else if (high != IWL_RATE_INVALID) { - start_hi = high; - rate = high; - - /* Higher rate not available, use the original */ - } else { - break; - } - } - } - - return new_rate; -} - -/* - * Set up search table for MIMO - */ -static int rs_switch_to_mimo2(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct sta_info *sta, - struct iwl4965_scale_tbl_info *tbl, int index) -{ - u16 rate_mask; - s32 rate; - s8 is_green = lq_sta->is_green; - - if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) || - !sta->ht_info.ht_supported) - return -1; - - if (priv->current_ht_config.tx_mimo_ps_mode == IWL_MIMO_PS_STATIC) - return -1; - - /* Need both Tx chains/antennas to support MIMO */ - if (priv->hw_params.tx_chains_num < 2) - return -1; - - IWL_DEBUG_RATE("LQ: try to switch to MIMO2\n"); - - tbl->lq_type = LQ_MIMO2; - tbl->is_dup = lq_sta->is_dup; - tbl->action = 0; - rate_mask = lq_sta->active_mimo2_rate; - - if (priv->current_ht_config.supported_chan_width - == IWL_CHANNEL_WIDTH_40MHZ) - tbl->is_fat = 1; - else - tbl->is_fat = 0; - - /* FIXME: - don't toggle SGI here - if (tbl->is_fat) { - if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY) - tbl->is_SGI = 1; - else - tbl->is_SGI = 0; - } else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY) - tbl->is_SGI = 1; - else - tbl->is_SGI = 0; - */ - - rs_set_expected_tpt_table(lq_sta, tbl); - - rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); - - IWL_DEBUG_RATE("LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask); - - if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { - IWL_DEBUG_RATE("Can't switch with index %d rate mask %x\n", - rate, rate_mask); - return -1; - } - tbl->current_rate = rate_n_flags_from_tbl(tbl, rate, is_green); - - IWL_DEBUG_RATE("LQ: Switch to new mcs %X index is green %X\n", - tbl->current_rate, is_green); - return 0; -} - -/* - * Set up search table for SISO - */ -static int rs_switch_to_siso(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct sta_info *sta, - struct iwl4965_scale_tbl_info *tbl, int index) -{ - u16 rate_mask; - u8 is_green = lq_sta->is_green; - s32 rate; - - if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) || - !sta->ht_info.ht_supported) - return -1; - - IWL_DEBUG_RATE("LQ: try to switch to SISO\n"); - - tbl->is_dup = lq_sta->is_dup; - tbl->lq_type = LQ_SISO; - tbl->action = 0; - rate_mask = lq_sta->active_siso_rate; - - if (priv->current_ht_config.supported_chan_width - == IWL_CHANNEL_WIDTH_40MHZ) - tbl->is_fat = 1; - else - tbl->is_fat = 0; - - /* FIXME: - don't toggle SGI here - if (tbl->is_fat) { - if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY) - tbl->is_SGI = 1; - else - tbl->is_SGI = 0; - } else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY) - tbl->is_SGI = 1; - else - tbl->is_SGI = 0; - */ - - if (is_green) - tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield*/ - - rs_set_expected_tpt_table(lq_sta, tbl); - rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); - - IWL_DEBUG_RATE("LQ: get best rate %d mask %X\n", rate, rate_mask); - if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { - IWL_DEBUG_RATE("can not switch with index %d rate mask %x\n", - rate, rate_mask); - return -1; - } - tbl->current_rate = rate_n_flags_from_tbl(tbl, rate, is_green); - IWL_DEBUG_RATE("LQ: Switch to new mcs %X index is green %X\n", - tbl->current_rate, is_green); - return 0; -} - -/* - * Try to switch to new modulation mode from legacy - */ -static int rs_move_legacy_other(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct sta_info *sta, - int index) -{ - struct iwl4965_scale_tbl_info *tbl = - &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl4965_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - struct iwl4965_rate_scale_data *window = &(tbl->win[index]); - u32 sz = (sizeof(struct iwl4965_scale_tbl_info) - - (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT)); - u8 start_action = tbl->action; - u8 valid_tx_ant = priv->hw_params.valid_tx_ant; - int ret = 0; - - for (; ;) { - switch (tbl->action) { - case IWL_LEGACY_SWITCH_ANTENNA: - IWL_DEBUG_RATE("LQ: Legacy toggle Antenna\n"); - - lq_sta->action_counter++; - - /* Don't change antenna if success has been great */ - if (window->success_ratio >= IWL_RS_GOOD_RATIO) - break; - - /* Set up search table to try other antenna */ - memcpy(search_tbl, tbl, sz); - - if (rs_toggle_antenna(valid_tx_ant, - &search_tbl->current_rate, search_tbl)) { - lq_sta->search_better_tbl = 1; - goto out; - } - break; - case IWL_LEGACY_SWITCH_SISO: - IWL_DEBUG_RATE("LQ: Legacy switch to SISO\n"); - - /* Set up search table to try SISO */ - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - ret = rs_switch_to_siso(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) { - lq_sta->search_better_tbl = 1; - lq_sta->action_counter = 0; - goto out; - } - - break; - case IWL_LEGACY_SWITCH_MIMO2: - IWL_DEBUG_RATE("LQ: Legacy switch to MIMO2\n"); - - /* Set up search table to try MIMO */ - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - search_tbl->ant_type = ANT_AB;/*FIXME:RS*/ - /*FIXME:RS:need to check ant validity*/ - ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) { - lq_sta->search_better_tbl = 1; - lq_sta->action_counter = 0; - goto out; - } - break; - } - tbl->action++; - if (tbl->action > IWL_LEGACY_SWITCH_MIMO2) - tbl->action = IWL_LEGACY_SWITCH_ANTENNA; - - if (tbl->action == start_action) - break; - - } - return 0; - - out: - tbl->action++; - if (tbl->action > IWL_LEGACY_SWITCH_MIMO2) - tbl->action = IWL_LEGACY_SWITCH_ANTENNA; - return 0; - -} - -/* - * Try to switch to new modulation mode from SISO - */ -static int rs_move_siso_to_other(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct sta_info *sta, - int index) -{ - u8 is_green = lq_sta->is_green; - struct iwl4965_scale_tbl_info *tbl = - &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl4965_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - struct iwl4965_rate_scale_data *window = &(tbl->win[index]); - u32 sz = (sizeof(struct iwl4965_scale_tbl_info) - - (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT)); - u8 start_action = tbl->action; - u8 valid_tx_ant = priv->hw_params.valid_tx_ant; - int ret; - - for (;;) { - lq_sta->action_counter++; - switch (tbl->action) { - case IWL_SISO_SWITCH_ANTENNA: - IWL_DEBUG_RATE("LQ: SISO toggle Antenna\n"); - if (window->success_ratio >= IWL_RS_GOOD_RATIO) - break; - - memcpy(search_tbl, tbl, sz); - if (rs_toggle_antenna(valid_tx_ant, - &search_tbl->current_rate, search_tbl)) { - lq_sta->search_better_tbl = 1; - goto out; - } - break; - case IWL_SISO_SWITCH_MIMO2: - IWL_DEBUG_RATE("LQ: SISO switch to MIMO2\n"); - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - search_tbl->ant_type = ANT_AB; /*FIXME:RS*/ - ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) { - lq_sta->search_better_tbl = 1; - goto out; - } - break; - case IWL_SISO_SWITCH_GI: - if (!tbl->is_fat && - !(priv->current_ht_config.sgf & - HT_SHORT_GI_20MHZ)) - break; - if (tbl->is_fat && - !(priv->current_ht_config.sgf & - HT_SHORT_GI_40MHZ)) - break; - - IWL_DEBUG_RATE("LQ: SISO toggle SGI/NGI\n"); - - memcpy(search_tbl, tbl, sz); - if (is_green) { - if (!tbl->is_SGI) - break; - else - IWL_ERROR("SGI was set in GF+SISO\n"); - } - search_tbl->is_SGI = !tbl->is_SGI; - rs_set_expected_tpt_table(lq_sta, search_tbl); - if (tbl->is_SGI) { - s32 tpt = lq_sta->last_tpt / 100; - if (tpt >= search_tbl->expected_tpt[index]) - break; - } - search_tbl->current_rate = rate_n_flags_from_tbl( - search_tbl, index, is_green); - lq_sta->search_better_tbl = 1; - goto out; - } - tbl->action++; - if (tbl->action > IWL_SISO_SWITCH_GI) - tbl->action = IWL_SISO_SWITCH_ANTENNA; - - if (tbl->action == start_action) - break; - } - return 0; - - out: - tbl->action++; - if (tbl->action > IWL_SISO_SWITCH_GI) - tbl->action = IWL_SISO_SWITCH_ANTENNA; - return 0; -} - -/* - * Try to switch to new modulation mode from MIMO - */ -static int rs_move_mimo_to_other(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct sta_info *sta, - int index) -{ - s8 is_green = lq_sta->is_green; - struct iwl4965_scale_tbl_info *tbl = - &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl4965_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - u32 sz = (sizeof(struct iwl4965_scale_tbl_info) - - (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT)); - u8 start_action = tbl->action; - /*u8 valid_tx_ant = priv->hw_params.valid_tx_ant;*/ - int ret; - - for (;;) { - lq_sta->action_counter++; - switch (tbl->action) { - case IWL_MIMO_SWITCH_ANTENNA_A: - case IWL_MIMO_SWITCH_ANTENNA_B: - IWL_DEBUG_RATE("LQ: MIMO2 switch to SISO\n"); - - /* Set up new search table for SISO */ - memcpy(search_tbl, tbl, sz); - - /*FIXME:RS:need to check ant validity + C*/ - if (tbl->action == IWL_MIMO_SWITCH_ANTENNA_A) - search_tbl->ant_type = ANT_A; - else - search_tbl->ant_type = ANT_B; - - ret = rs_switch_to_siso(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) { - lq_sta->search_better_tbl = 1; - goto out; - } - break; - - case IWL_MIMO_SWITCH_GI: - if (!tbl->is_fat && - !(priv->current_ht_config.sgf & - HT_SHORT_GI_20MHZ)) - break; - if (tbl->is_fat && - !(priv->current_ht_config.sgf & - HT_SHORT_GI_40MHZ)) - break; - - IWL_DEBUG_RATE("LQ: MIMO toggle SGI/NGI\n"); - - /* Set up new search table for MIMO */ - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = !tbl->is_SGI; - rs_set_expected_tpt_table(lq_sta, search_tbl); - /* - * If active table already uses the fastest possible - * modulation (dual stream with short guard interval), - * and it's working well, there's no need to look - * for a better type of modulation! - */ - if (tbl->is_SGI) { - s32 tpt = lq_sta->last_tpt / 100; - if (tpt >= search_tbl->expected_tpt[index]) - break; - } - search_tbl->current_rate = rate_n_flags_from_tbl( - search_tbl, index, is_green); - lq_sta->search_better_tbl = 1; - goto out; - - } - tbl->action++; - if (tbl->action > IWL_MIMO_SWITCH_GI) - tbl->action = IWL_MIMO_SWITCH_ANTENNA_A; - - if (tbl->action == start_action) - break; - } - - return 0; - out: - tbl->action++; - if (tbl->action > IWL_MIMO_SWITCH_GI) - tbl->action = IWL_MIMO_SWITCH_ANTENNA_A; - return 0; - -} - -/* - * Check whether we should continue using same modulation mode, or - * begin search for a new mode, based on: - * 1) # tx successes or failures while using this mode - * 2) # times calling this function - * 3) elapsed time in this mode (not used, for now) - */ -static void rs_stay_in_table(struct iwl4965_lq_sta *lq_sta) -{ - struct iwl4965_scale_tbl_info *tbl; - int i; - int active_tbl; - int flush_interval_passed = 0; - struct iwl_priv *priv; - - priv = lq_sta->drv; - active_tbl = lq_sta->active_tbl; - - tbl = &(lq_sta->lq_info[active_tbl]); - - /* If we've been disallowing search, see if we should now allow it */ - if (lq_sta->stay_in_tbl) { - - /* Elapsed time using current modulation mode */ - if (lq_sta->flush_timer) - flush_interval_passed = - time_after(jiffies, - (unsigned long)(lq_sta->flush_timer + - IWL_RATE_SCALE_FLUSH_INTVL)); - - /* - * Check if we should allow search for new modulation mode. - * If many frames have failed or succeeded, or we've used - * this same modulation for a long time, allow search, and - * reset history stats that keep track of whether we should - * allow a new search. Also (below) reset all bitmaps and - * stats in active history. - */ - if ((lq_sta->total_failed > lq_sta->max_failure_limit) || - (lq_sta->total_success > lq_sta->max_success_limit) || - ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer) - && (flush_interval_passed))) { - IWL_DEBUG_RATE("LQ: stay is expired %d %d %d\n:", - lq_sta->total_failed, - lq_sta->total_success, - flush_interval_passed); - - /* Allow search for new mode */ - lq_sta->stay_in_tbl = 0; /* only place reset */ - lq_sta->total_failed = 0; - lq_sta->total_success = 0; - lq_sta->flush_timer = 0; - - /* - * Else if we've used this modulation mode enough repetitions - * (regardless of elapsed time or success/failure), reset - * history bitmaps and rate-specific stats for all rates in - * active table. - */ - } else { - lq_sta->table_count++; - if (lq_sta->table_count >= - lq_sta->table_count_limit) { - lq_sta->table_count = 0; - - IWL_DEBUG_RATE("LQ: stay in table clear win\n"); - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window( - &(tbl->win[i])); - } - } - - /* If transitioning to allow "search", reset all history - * bitmaps and stats in active table (this will become the new - * "search" table). */ - if (!lq_sta->stay_in_tbl) { - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&(tbl->win[i])); - } - } -} - -/* - * Do rate scaling and search for new modulation mode. - */ -static void rs_rate_scale_perform(struct iwl_priv *priv, - struct net_device *dev, - struct ieee80211_hdr *hdr, - struct sta_info *sta) -{ - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_hw *hw = local_to_hw(local); - struct ieee80211_conf *conf = &hw->conf; - int low = IWL_RATE_INVALID; - int high = IWL_RATE_INVALID; - int index; - int i; - struct iwl4965_rate_scale_data *window = NULL; - int current_tpt = IWL_INVALID_VALUE; - int low_tpt = IWL_INVALID_VALUE; - int high_tpt = IWL_INVALID_VALUE; - u32 fail_count; - s8 scale_action = 0; - __le16 fc; - u16 rate_mask; - u8 update_lq = 0; - struct iwl4965_lq_sta *lq_sta; - struct iwl4965_scale_tbl_info *tbl, *tbl1; - u16 rate_scale_index_msk = 0; - u32 rate; - u8 is_green = 0; - u8 active_tbl = 0; - u8 done_search = 0; - u16 high_low; - s32 sr; - u8 tid = MAX_TID_COUNT; - - IWL_DEBUG_RATE("rate scale calculate new rate for skb\n"); - - fc = hdr->frame_control; - if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1)) { - /* Send management frames and broadcast/multicast data using - * lowest rate. */ - /* TODO: this could probably be improved.. */ - return; - } - - if (!sta || !sta->rate_ctrl_priv) - return; - - lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv; - - tid = rs_tl_add_packet(lq_sta, hdr); - - /* - * Select rate-scale / modulation-mode table to work with in - * the rest of this function: "search" if searching for better - * modulation mode, or "active" if doing rate scaling within a mode. - */ - if (!lq_sta->search_better_tbl) - active_tbl = lq_sta->active_tbl; - else - active_tbl = 1 - lq_sta->active_tbl; - - tbl = &(lq_sta->lq_info[active_tbl]); - is_green = lq_sta->is_green; - - /* current tx rate */ - index = sta->last_txrate_idx; - - IWL_DEBUG_RATE("Rate scale index %d for type %d\n", index, - tbl->lq_type); - - /* rates available for this association, and for modulation mode */ - rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type); - - IWL_DEBUG_RATE("mask 0x%04X \n", rate_mask); - - /* mask with station rate restriction */ - if (is_legacy(tbl->lq_type)) { - if (lq_sta->band == IEEE80211_BAND_5GHZ) - /* supp_rates has no CCK bits in A mode */ - rate_scale_index_msk = (u16) (rate_mask & - (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); - else - rate_scale_index_msk = (u16) (rate_mask & - lq_sta->supp_rates); - - } else - rate_scale_index_msk = rate_mask; - - if (!rate_scale_index_msk) - rate_scale_index_msk = rate_mask; - - if (!((1 << index) & rate_scale_index_msk)) { - IWL_ERROR("Current Rate is not valid\n"); - return; - } - - /* Get expected throughput table and history window for current rate */ - if (!tbl->expected_tpt) { - IWL_ERROR("tbl->expected_tpt is NULL\n"); - return; - } - - window = &(tbl->win[index]); - - /* - * If there is not enough history to calculate actual average - * throughput, keep analyzing results of more tx frames, without - * changing rate or mode (bypass most of the rest of this function). - * Set up new rate table in uCode only if old rate is not supported - * in current association (use new rate found above). - */ - fail_count = window->counter - window->success_counter; - if ((fail_count < IWL_RATE_MIN_FAILURE_TH) && - (window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) { - IWL_DEBUG_RATE("LQ: still below TH. succ=%d total=%d " - "for index %d\n", - window->success_counter, window->counter, index); - - /* Can't calculate this yet; not enough history */ - window->average_tpt = IWL_INVALID_VALUE; - - /* Should we stay with this modulation mode, - * or search for a new one? */ - rs_stay_in_table(lq_sta); - - goto out; - - /* Else we have enough samples; calculate estimate of - * actual average throughput */ - } else { - /*FIXME:RS remove this else if we don't get this error*/ - if (window->average_tpt != ((window->success_ratio * - tbl->expected_tpt[index] + 64) / 128)) { - IWL_ERROR("expected_tpt should have been calculated" - " by now\n"); - window->average_tpt = ((window->success_ratio * - tbl->expected_tpt[index] + 64) / 128); - } - } - - /* If we are searching for better modulation mode, check success. */ - if (lq_sta->search_better_tbl) { - - /* If good success, continue using the "search" mode; - * no need to send new link quality command, since we're - * continuing to use the setup that we've been trying. */ - if (window->average_tpt > lq_sta->last_tpt) { - - IWL_DEBUG_RATE("LQ: SWITCHING TO CURRENT TABLE " - "suc=%d cur-tpt=%d old-tpt=%d\n", - window->success_ratio, - window->average_tpt, - lq_sta->last_tpt); - - if (!is_legacy(tbl->lq_type)) - lq_sta->enable_counter = 1; - - /* Swap tables; "search" becomes "active" */ - lq_sta->active_tbl = active_tbl; - current_tpt = window->average_tpt; - - /* Else poor success; go back to mode in "active" table */ - } else { - - IWL_DEBUG_RATE("LQ: GOING BACK TO THE OLD TABLE " - "suc=%d cur-tpt=%d old-tpt=%d\n", - window->success_ratio, - window->average_tpt, - lq_sta->last_tpt); - - /* Nullify "search" table */ - tbl->lq_type = LQ_NONE; - - /* Revert to "active" table */ - active_tbl = lq_sta->active_tbl; - tbl = &(lq_sta->lq_info[active_tbl]); - - /* Revert to "active" rate and throughput info */ - index = iwl_hwrate_to_plcp_idx(tbl->current_rate); - current_tpt = lq_sta->last_tpt; - - /* Need to set up a new rate table in uCode */ - update_lq = 1; - } - - /* Either way, we've made a decision; modulation mode - * search is done, allow rate adjustment next time. */ - lq_sta->search_better_tbl = 0; - done_search = 1; /* Don't switch modes below! */ - goto lq_update; - } - - /* (Else) not in search of better modulation mode, try for better - * starting rate, while staying in this mode. */ - high_low = rs_get_adjacent_rate(priv, index, rate_scale_index_msk, - tbl->lq_type); - low = high_low & 0xff; - high = (high_low >> 8) & 0xff; - - sr = window->success_ratio; - - /* Collect measured throughputs for current and adjacent rates */ - current_tpt = window->average_tpt; - if (low != IWL_RATE_INVALID) - low_tpt = tbl->win[low].average_tpt; - if (high != IWL_RATE_INVALID) - high_tpt = tbl->win[high].average_tpt; - - scale_action = 0; - - /* Too many failures, decrease rate */ - if ((sr <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) { - IWL_DEBUG_RATE("decrease rate because of low success_ratio\n"); - scale_action = -1; - - /* No throughput measured yet for adjacent rates; try increase. */ - } else if ((low_tpt == IWL_INVALID_VALUE) && - (high_tpt == IWL_INVALID_VALUE)) { - - if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH) - scale_action = 1; - else if (low != IWL_RATE_INVALID) - scale_action = -1; - } - - /* Both adjacent throughputs are measured, but neither one has better - * throughput; we're using the best rate, don't change it! */ - else if ((low_tpt != IWL_INVALID_VALUE) && - (high_tpt != IWL_INVALID_VALUE) && - (low_tpt < current_tpt) && - (high_tpt < current_tpt)) - scale_action = 0; - - /* At least one adjacent rate's throughput is measured, - * and may have better performance. */ - else { - /* Higher adjacent rate's throughput is measured */ - if (high_tpt != IWL_INVALID_VALUE) { - /* Higher rate has better throughput */ - if (high_tpt > current_tpt && - sr >= IWL_RATE_INCREASE_TH) { - scale_action = 1; - } else { - IWL_DEBUG_RATE - ("decrease rate because of high tpt\n"); - scale_action = -1; - } - - /* Lower adjacent rate's throughput is measured */ - } else if (low_tpt != IWL_INVALID_VALUE) { - /* Lower rate has better throughput */ - if (low_tpt > current_tpt) { - IWL_DEBUG_RATE - ("decrease rate because of low tpt\n"); - scale_action = -1; - } else if (sr >= IWL_RATE_INCREASE_TH) { - scale_action = 1; - } - } - } - - /* Sanity check; asked for decrease, but success rate or throughput - * has been good at old rate. Don't change it. */ - if ((scale_action == -1) && (low != IWL_RATE_INVALID) && - ((sr > IWL_RATE_HIGH_TH) || - (current_tpt > (100 * tbl->expected_tpt[low])))) - scale_action = 0; - - switch (scale_action) { - case -1: - /* Decrease starting rate, update uCode's rate table */ - if (low != IWL_RATE_INVALID) { - update_lq = 1; - index = low; - } - break; - case 1: - /* Increase starting rate, update uCode's rate table */ - if (high != IWL_RATE_INVALID) { - update_lq = 1; - index = high; - } - - break; - case 0: - /* No change */ - default: - break; - } - - IWL_DEBUG_RATE("choose rate scale index %d action %d low %d " - "high %d type %d\n", - index, scale_action, low, high, tbl->lq_type); - -lq_update: - /* Replace uCode's rate table for the destination station. */ - if (update_lq) { - rate = rate_n_flags_from_tbl(tbl, index, is_green); - rs_fill_link_cmd(priv, lq_sta, rate); - iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC); - } - - /* Should we stay with this modulation mode, or search for a new one? */ - rs_stay_in_table(lq_sta); - - /* - * Search for new modulation mode if we're: - * 1) Not changing rates right now - * 2) Not just finishing up a search - * 3) Allowing a new search - */ - if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) { - /* Save current throughput to compare with "search" throughput*/ - lq_sta->last_tpt = current_tpt; - - /* Select a new "search" modulation mode to try. - * If one is found, set up the new "search" table. */ - if (is_legacy(tbl->lq_type)) - rs_move_legacy_other(priv, lq_sta, conf, sta, index); - else if (is_siso(tbl->lq_type)) - rs_move_siso_to_other(priv, lq_sta, conf, sta, index); - else - rs_move_mimo_to_other(priv, lq_sta, conf, sta, index); - - /* If new "search" mode was selected, set up in uCode table */ - if (lq_sta->search_better_tbl) { - /* Access the "search" table, clear its history. */ - tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&(tbl->win[i])); - - /* Use new "search" start rate */ - index = iwl_hwrate_to_plcp_idx(tbl->current_rate); - - IWL_DEBUG_RATE("Switch current mcs: %X index: %d\n", - tbl->current_rate, index); - rs_fill_link_cmd(priv, lq_sta, tbl->current_rate); - iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC); - } - - /* If the "active" (non-search) mode was legacy, - * and we've tried switching antennas, - * but we haven't been able to try HT modes (not available), - * stay with best antenna legacy modulation for a while - * before next round of mode comparisons. */ - tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]); - if (is_legacy(tbl1->lq_type) && - (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)) && - (lq_sta->action_counter >= 1)) { - lq_sta->action_counter = 0; - IWL_DEBUG_RATE("LQ: STAY in legacy table\n"); - rs_set_stay_in_table(priv, 1, lq_sta); - } - - /* If we're in an HT mode, and all 3 mode switch actions - * have been tried and compared, stay in this best modulation - * mode for a while before next round of mode comparisons. */ - if (lq_sta->enable_counter && - (lq_sta->action_counter >= IWL_ACTION_LIMIT)) { - if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) && - (lq_sta->tx_agg_tid_en & (1 << tid)) && - (tid != MAX_TID_COUNT)) { - IWL_DEBUG_RATE("try to aggregate tid %d\n", tid); - rs_tl_turn_on_agg(priv, tid, lq_sta, sta); - } - lq_sta->action_counter = 0; - rs_set_stay_in_table(priv, 0, lq_sta); - } - - /* - * Else, don't search for a new modulation mode. - * Put new timestamp in stay-in-modulation-mode flush timer if: - * 1) Not changing rates right now - * 2) Not just finishing up a search - * 3) flush timer is empty - */ - } else { - if ((!update_lq) && (!done_search) && (!lq_sta->flush_timer)) - lq_sta->flush_timer = jiffies; - } - -out: - tbl->current_rate = rate_n_flags_from_tbl(tbl, index, is_green); - i = index; - sta->last_txrate_idx = i; - - /* sta->txrate_idx is an index to A mode rates which start - * at IWL_FIRST_OFDM_RATE - */ - if (lq_sta->band == IEEE80211_BAND_5GHZ) - sta->txrate_idx = i - IWL_FIRST_OFDM_RATE; - else - sta->txrate_idx = i; - - return; -} - - -static void rs_initialize_lq(struct iwl_priv *priv, - struct ieee80211_conf *conf, - struct sta_info *sta) -{ - struct iwl4965_lq_sta *lq_sta; - struct iwl4965_scale_tbl_info *tbl; - int rate_idx; - int i; - u32 rate; - u8 use_green = rs_use_green(priv, conf); - u8 active_tbl = 0; - u8 valid_tx_ant; - - if (!sta || !sta->rate_ctrl_priv) - goto out; - - lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv; - i = sta->last_txrate_idx; - - if ((lq_sta->lq.sta_id == 0xff) && - (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)) - goto out; - - valid_tx_ant = priv->hw_params.valid_tx_ant; - - if (!lq_sta->search_better_tbl) - active_tbl = lq_sta->active_tbl; - else - active_tbl = 1 - lq_sta->active_tbl; - - tbl = &(lq_sta->lq_info[active_tbl]); - - if ((i < 0) || (i >= IWL_RATE_COUNT)) - i = 0; - - /* FIXME:RS: This is also wrong in 4965 */ - rate = iwl_rates[i].plcp; - rate |= RATE_MCS_ANT_B_MSK; - rate &= ~RATE_MCS_ANT_A_MSK; - - if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE) - rate |= RATE_MCS_CCK_MSK; - - tbl->ant_type = ANT_B; - rs_get_tbl_info_from_mcs(rate, priv->band, tbl, &rate_idx); - if (!rs_is_valid_ant(valid_tx_ant, tbl->ant_type)) - rs_toggle_antenna(valid_tx_ant, &rate, tbl); - - rate = rate_n_flags_from_tbl(tbl, rate_idx, use_green); - tbl->current_rate = rate; - rs_set_expected_tpt_table(lq_sta, tbl); - rs_fill_link_cmd(NULL, lq_sta, rate); - iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC); - out: - return; -} - -static void rs_get_rate(void *priv_rate, struct net_device *dev, - struct ieee80211_supported_band *sband, - struct sk_buff *skb, - struct rate_selection *sel) -{ - - int i; - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_conf *conf = &local->hw.conf; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct sta_info *sta; - __le16 fc; - struct iwl_priv *priv = (struct iwl_priv *)priv_rate; - struct iwl4965_lq_sta *lq_sta; - - IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n"); - - rcu_read_lock(); - - sta = sta_info_get(local, hdr->addr1); - - /* Send management frames and broadcast/multicast data using lowest - * rate. */ - fc = hdr->frame_control; - if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) || - !sta || !sta->rate_ctrl_priv) { - sel->rate_idx = rate_lowest_index(local, sband, sta); - goto out; - } - - lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv; - i = sta->last_txrate_idx; - - if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && - !lq_sta->ibss_sta_added) { - u8 sta_id = iwl_find_station(priv, hdr->addr1); - DECLARE_MAC_BUF(mac); - - if (sta_id == IWL_INVALID_STATION) { - IWL_DEBUG_RATE("LQ: ADD station %s\n", - print_mac(mac, hdr->addr1)); - sta_id = iwl_add_station_flags(priv, hdr->addr1, - 0, CMD_ASYNC, NULL); - } - if ((sta_id != IWL_INVALID_STATION)) { - lq_sta->lq.sta_id = sta_id; - lq_sta->lq.rs_table[0].rate_n_flags = 0; - lq_sta->ibss_sta_added = 1; - rs_initialize_lq(priv, conf, sta); - } - } - - if ((i < 0) || (i > IWL_RATE_COUNT)) { - sel->rate_idx = rate_lowest_index(local, sband, sta); - goto out; - } - - if (sband->band == IEEE80211_BAND_5GHZ) - i -= IWL_FIRST_OFDM_RATE; - sel->rate_idx = i; -out: - rcu_read_unlock(); -} - -static void *rs_alloc_sta(void *priv_rate, gfp_t gfp) -{ - struct iwl4965_lq_sta *lq_sta; - struct iwl_priv *priv; - int i, j; - - priv = (struct iwl_priv *)priv_rate; - IWL_DEBUG_RATE("create station rate scale window\n"); - - lq_sta = kzalloc(sizeof(struct iwl4965_lq_sta), gfp); - - if (lq_sta == NULL) - return NULL; - lq_sta->lq.sta_id = 0xff; - - - for (j = 0; j < LQ_SIZE; j++) - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&(lq_sta->lq_info[j].win[i])); - - return lq_sta; -} - -static void rs_rate_init(void *priv_rate, void *priv_sta, - struct ieee80211_local *local, - struct sta_info *sta) -{ - int i, j; - struct ieee80211_conf *conf = &local->hw.conf; - struct ieee80211_supported_band *sband; - struct iwl_priv *priv = (struct iwl_priv *)priv_rate; - struct iwl4965_lq_sta *lq_sta = priv_sta; - - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; - - lq_sta->flush_timer = 0; - lq_sta->supp_rates = sta->supp_rates[sband->band]; - sta->txrate_idx = 3; - for (j = 0; j < LQ_SIZE; j++) - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&(lq_sta->lq_info[j].win[i])); - - IWL_DEBUG_RATE("LQ: *** rate scale global init ***\n"); - /* TODO: what is a good starting rate for STA? About middle? Maybe not - * the lowest or the highest rate.. Could consider using RSSI from - * previous packets? Need to have IEEE 802.1X auth succeed immediately - * after assoc.. */ - - lq_sta->ibss_sta_added = 0; - if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { - u8 sta_id = iwl_find_station(priv, sta->addr); - DECLARE_MAC_BUF(mac); - - /* for IBSS the call are from tasklet */ - IWL_DEBUG_RATE("LQ: ADD station %s\n", - print_mac(mac, sta->addr)); - - if (sta_id == IWL_INVALID_STATION) { - IWL_DEBUG_RATE("LQ: ADD station %s\n", - print_mac(mac, sta->addr)); - sta_id = iwl_add_station_flags(priv, sta->addr, - 0, CMD_ASYNC, NULL); - } - if ((sta_id != IWL_INVALID_STATION)) { - lq_sta->lq.sta_id = sta_id; - lq_sta->lq.rs_table[0].rate_n_flags = 0; - } - /* FIXME: this is w/a remove it later */ - priv->assoc_station_added = 1; - } - - /* Find highest tx rate supported by hardware and destination station */ - for (i = 0; i < sband->n_bitrates; i++) - if (sta->supp_rates[sband->band] & BIT(i)) - sta->txrate_idx = i; - - sta->last_txrate_idx = sta->txrate_idx; - /* WTF is with this bogus comment? A doesn't have cck rates */ - /* For MODE_IEEE80211A, cck rates are at end of rate table */ - if (local->hw.conf.channel->band == IEEE80211_BAND_5GHZ) - sta->last_txrate_idx += IWL_FIRST_OFDM_RATE; - - lq_sta->is_dup = 0; - lq_sta->is_green = rs_use_green(priv, conf); - lq_sta->active_legacy_rate = priv->active_rate & ~(0x1000); - lq_sta->active_rate_basic = priv->active_rate_basic; - lq_sta->band = priv->band; - /* - * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3), - * supp_rates[] does not; shift to convert format, force 9 MBits off. - */ - lq_sta->active_siso_rate = conf->ht_conf.supp_mcs_set[0] << 1; - lq_sta->active_siso_rate |= conf->ht_conf.supp_mcs_set[0] & 0x1; - lq_sta->active_siso_rate &= ~((u16)0x2); - lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE; - - /* Same here */ - lq_sta->active_mimo2_rate = conf->ht_conf.supp_mcs_set[1] << 1; - lq_sta->active_mimo2_rate |= conf->ht_conf.supp_mcs_set[1] & 0x1; - lq_sta->active_mimo2_rate &= ~((u16)0x2); - lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE; - - lq_sta->active_mimo3_rate = conf->ht_conf.supp_mcs_set[2] << 1; - lq_sta->active_mimo3_rate |= conf->ht_conf.supp_mcs_set[2] & 0x1; - lq_sta->active_mimo3_rate &= ~((u16)0x2); - lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE; - - IWL_DEBUG_RATE("SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n", - lq_sta->active_siso_rate, - lq_sta->active_mimo2_rate, - lq_sta->active_mimo3_rate); - - /* These values will be overriden later */ - lq_sta->lq.general_params.single_stream_ant_msk = ANT_A; - lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB; - - /* as default allow aggregation for all tids */ - lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID; - lq_sta->drv = priv; - - rs_initialize_lq(priv, conf, sta); -} - -static void rs_fill_link_cmd(const struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - u32 new_rate) -{ - struct iwl4965_scale_tbl_info tbl_type; - int index = 0; - int rate_idx; - int repeat_rate = 0; - u8 ant_toggle_cnt = 0; - u8 use_ht_possible = 1; - u8 valid_tx_ant = 0; - struct iwl_link_quality_cmd *lq_cmd = &lq_sta->lq; - - /* Override starting rate (index 0) if needed for debug purposes */ - rs_dbgfs_set_mcs(lq_sta, &new_rate, index); - - /* Interpret new_rate (rate_n_flags) */ - memset(&tbl_type, 0, sizeof(tbl_type)); - rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, - &tbl_type, &rate_idx); - - /* How many times should we repeat the initial rate? */ - if (is_legacy(tbl_type.lq_type)) { - ant_toggle_cnt = 1; - repeat_rate = IWL_NUMBER_TRY; - } else { - repeat_rate = IWL_HT_NUMBER_TRY; - } - - lq_cmd->general_params.mimo_delimiter = - is_mimo(tbl_type.lq_type) ? 1 : 0; - - /* Fill 1st table entry (index 0) */ - lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate); - - if (num_of_ant(tbl_type.ant_type) == 1) { - lq_cmd->general_params.single_stream_ant_msk = - tbl_type.ant_type; - } else if (num_of_ant(tbl_type.ant_type) == 2) { - lq_cmd->general_params.dual_stream_ant_msk = - tbl_type.ant_type; - } /* otherwise we don't modify the existing value */ - - index++; - repeat_rate--; - - if (priv) - valid_tx_ant = priv->hw_params.valid_tx_ant; - - /* Fill rest of rate table */ - while (index < LINK_QUAL_MAX_RETRY_NUM) { - /* Repeat initial/next rate. - * For legacy IWL_NUMBER_TRY == 1, this loop will not execute. - * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */ - while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) { - if (is_legacy(tbl_type.lq_type)) { - if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) - ant_toggle_cnt++; - else if (priv && - rs_toggle_antenna(valid_tx_ant, - &new_rate, &tbl_type)) - ant_toggle_cnt = 1; -} - - /* Override next rate if needed for debug purposes */ - rs_dbgfs_set_mcs(lq_sta, &new_rate, index); - - /* Fill next table entry */ - lq_cmd->rs_table[index].rate_n_flags = - cpu_to_le32(new_rate); - repeat_rate--; - index++; - } - - rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type, - &rate_idx); - - /* Indicate to uCode which entries might be MIMO. - * If initial rate was MIMO, this will finally end up - * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */ - if (is_mimo(tbl_type.lq_type)) - lq_cmd->general_params.mimo_delimiter = index; - - /* Get next rate */ - new_rate = rs_get_lower_rate(lq_sta, &tbl_type, rate_idx, - use_ht_possible); - - /* How many times should we repeat the next rate? */ - if (is_legacy(tbl_type.lq_type)) { - if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) - ant_toggle_cnt++; - else if (priv && - rs_toggle_antenna(valid_tx_ant, - &new_rate, &tbl_type)) - ant_toggle_cnt = 1; - - repeat_rate = IWL_NUMBER_TRY; - } else { - repeat_rate = IWL_HT_NUMBER_TRY; - } - - /* Don't allow HT rates after next pass. - * rs_get_lower_rate() will change type to LQ_A or LQ_G. */ - use_ht_possible = 0; - - /* Override next rate if needed for debug purposes */ - rs_dbgfs_set_mcs(lq_sta, &new_rate, index); - - /* Fill next table entry */ - lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate); - - index++; - repeat_rate--; - } - - lq_cmd->agg_params.agg_frame_cnt_limit = 64; - lq_cmd->agg_params.agg_dis_start_th = 3; - lq_cmd->agg_params.agg_time_limit = cpu_to_le16(4000); -} - -static void *rs_alloc(struct ieee80211_local *local) -{ - return local->hw.priv; -} -/* rate scale requires free function to be implemented */ -static void rs_free(void *priv_rate) -{ - return; -} - -static void rs_clear(void *priv_rate) -{ - struct iwl_priv *priv = (struct iwl_priv *) priv_rate; - - IWL_DEBUG_RATE("enter\n"); - - /* TODO - add rate scale state reset */ - - IWL_DEBUG_RATE("leave\n"); -} - -static void rs_free_sta(void *priv_rate, void *priv_sta) -{ - struct iwl4965_lq_sta *lq_sta = priv_sta; - struct iwl_priv *priv; - - priv = (struct iwl_priv *)priv_rate; - IWL_DEBUG_RATE("enter\n"); - kfree(lq_sta); - IWL_DEBUG_RATE("leave\n"); -} - - -#ifdef CONFIG_MAC80211_DEBUGFS -static int open_file_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} -static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta, - u32 *rate_n_flags, int index) -{ - struct iwl_priv *priv; - - priv = lq_sta->drv; - if (lq_sta->dbg_fixed_rate) { - if (index < 12) { - *rate_n_flags = lq_sta->dbg_fixed_rate; - } else { - if (lq_sta->band == IEEE80211_BAND_5GHZ) - *rate_n_flags = 0x800D; - else - *rate_n_flags = 0x820A; - } - IWL_DEBUG_RATE("Fixed rate ON\n"); - } else { - IWL_DEBUG_RATE("Fixed rate OFF\n"); - } -} - -static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file, - const char __user *user_buf, size_t count, loff_t *ppos) -{ - struct iwl4965_lq_sta *lq_sta = file->private_data; - struct iwl_priv *priv; - char buf[64]; - int buf_size; - u32 parsed_rate; - - priv = lq_sta->drv; - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - - if (sscanf(buf, "%x", &parsed_rate) == 1) - lq_sta->dbg_fixed_rate = parsed_rate; - else - lq_sta->dbg_fixed_rate = 0; - - lq_sta->active_legacy_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */ - lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ - lq_sta->active_mimo2_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ - lq_sta->active_mimo3_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ - - IWL_DEBUG_RATE("sta_id %d rate 0x%X\n", - lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate); - - if (lq_sta->dbg_fixed_rate) { - rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate); - iwl_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC); - } - - return count; -} - -static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file, - char __user *user_buf, size_t count, loff_t *ppos) -{ - char buff[1024]; - int desc = 0; - int i = 0; - - struct iwl4965_lq_sta *lq_sta = file->private_data; - - desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id); - desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n", - lq_sta->total_failed, lq_sta->total_success, - lq_sta->active_legacy_rate); - desc += sprintf(buff+desc, "fixed rate 0x%X\n", - lq_sta->dbg_fixed_rate); - desc += sprintf(buff+desc, "general:" - "flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n", - lq_sta->lq.general_params.flags, - lq_sta->lq.general_params.mimo_delimiter, - lq_sta->lq.general_params.single_stream_ant_msk, - lq_sta->lq.general_params.dual_stream_ant_msk); - - desc += sprintf(buff+desc, "agg:" - "time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n", - le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit), - lq_sta->lq.agg_params.agg_dis_start_th, - lq_sta->lq.agg_params.agg_frame_cnt_limit); - - desc += sprintf(buff+desc, - "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n", - lq_sta->lq.general_params.start_rate_index[0], - lq_sta->lq.general_params.start_rate_index[1], - lq_sta->lq.general_params.start_rate_index[2], - lq_sta->lq.general_params.start_rate_index[3]); - - - for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) - desc += sprintf(buff+desc, " rate[%d] 0x%X\n", - i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags)); - - return simple_read_from_buffer(user_buf, count, ppos, buff, desc); -} - -static const struct file_operations rs_sta_dbgfs_scale_table_ops = { - .write = rs_sta_dbgfs_scale_table_write, - .read = rs_sta_dbgfs_scale_table_read, - .open = open_file_generic, -}; -static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file, - char __user *user_buf, size_t count, loff_t *ppos) -{ - char buff[1024]; - int desc = 0; - int i, j; - - struct iwl4965_lq_sta *lq_sta = file->private_data; - for (i = 0; i < LQ_SIZE; i++) { - desc += sprintf(buff+desc, "%s type=%d SGI=%d FAT=%d DUP=%d\n" - "rate=0x%X\n", - lq_sta->active_tbl == i?"*":"x", - lq_sta->lq_info[i].lq_type, - lq_sta->lq_info[i].is_SGI, - lq_sta->lq_info[i].is_fat, - lq_sta->lq_info[i].is_dup, - lq_sta->lq_info[i].current_rate); - for (j = 0; j < IWL_RATE_COUNT; j++) { - desc += sprintf(buff+desc, - "counter=%d success=%d %%=%d\n", - lq_sta->lq_info[i].win[j].counter, - lq_sta->lq_info[i].win[j].success_counter, - lq_sta->lq_info[i].win[j].success_ratio); - } - } - return simple_read_from_buffer(user_buf, count, ppos, buff, desc); -} - -static const struct file_operations rs_sta_dbgfs_stats_table_ops = { - .read = rs_sta_dbgfs_stats_table_read, - .open = open_file_generic, -}; - -static void rs_add_debugfs(void *priv, void *priv_sta, - struct dentry *dir) -{ - struct iwl4965_lq_sta *lq_sta = priv_sta; - lq_sta->rs_sta_dbgfs_scale_table_file = - debugfs_create_file("rate_scale_table", 0600, dir, - lq_sta, &rs_sta_dbgfs_scale_table_ops); - lq_sta->rs_sta_dbgfs_stats_table_file = - debugfs_create_file("rate_stats_table", 0600, dir, - lq_sta, &rs_sta_dbgfs_stats_table_ops); - lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file = - debugfs_create_u8("tx_agg_tid_enable", 0600, dir, - &lq_sta->tx_agg_tid_en); - -} - -static void rs_remove_debugfs(void *priv, void *priv_sta) -{ - struct iwl4965_lq_sta *lq_sta = priv_sta; - debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file); - debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file); - debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file); -} -#endif - -static struct rate_control_ops rs_ops = { - .module = NULL, - .name = RS_NAME, - .tx_status = rs_tx_status, - .get_rate = rs_get_rate, - .rate_init = rs_rate_init, - .clear = rs_clear, - .alloc = rs_alloc, - .free = rs_free, - .alloc_sta = rs_alloc_sta, - .free_sta = rs_free_sta, -#ifdef CONFIG_MAC80211_DEBUGFS - .add_sta_debugfs = rs_add_debugfs, - .remove_sta_debugfs = rs_remove_debugfs, -#endif -}; - -int iwl4965_fill_rs_info(struct ieee80211_hw *hw, char *buf, u8 sta_id) -{ - struct ieee80211_local *local = hw_to_local(hw); - struct iwl_priv *priv = hw->priv; - struct iwl4965_lq_sta *lq_sta; - struct sta_info *sta; - int cnt = 0, i; - u32 samples = 0, success = 0, good = 0; - unsigned long now = jiffies; - u32 max_time = 0; - u8 lq_type, antenna; - - rcu_read_lock(); - - sta = sta_info_get(local, priv->stations[sta_id].sta.sta.addr); - if (!sta || !sta->rate_ctrl_priv) { - if (sta) - IWL_DEBUG_RATE("leave - no private rate data!\n"); - else - IWL_DEBUG_RATE("leave - no station!\n"); - rcu_read_unlock(); - return sprintf(buf, "station %d not found\n", sta_id); - } - - lq_sta = (void *)sta->rate_ctrl_priv; - - lq_type = lq_sta->lq_info[lq_sta->active_tbl].lq_type; - antenna = lq_sta->lq_info[lq_sta->active_tbl].ant_type; - - if (is_legacy(lq_type)) - i = IWL_RATE_54M_INDEX; - else - i = IWL_RATE_60M_INDEX; - while (1) { - u64 mask; - int j; - int active = lq_sta->active_tbl; - - cnt += - sprintf(&buf[cnt], " %2dMbs: ", iwl_rates[i].ieee / 2); - - mask = (1ULL << (IWL_RATE_MAX_WINDOW - 1)); - for (j = 0; j < IWL_RATE_MAX_WINDOW; j++, mask >>= 1) - buf[cnt++] = - (lq_sta->lq_info[active].win[i].data & mask) - ? '1' : '0'; - - samples += lq_sta->lq_info[active].win[i].counter; - good += lq_sta->lq_info[active].win[i].success_counter; - success += lq_sta->lq_info[active].win[i].success_counter * - iwl_rates[i].ieee; - - if (lq_sta->lq_info[active].win[i].stamp) { - int delta = - jiffies_to_msecs(now - - lq_sta->lq_info[active].win[i].stamp); - - if (delta > max_time) - max_time = delta; - - cnt += sprintf(&buf[cnt], "%5dms\n", delta); - } else - buf[cnt++] = '\n'; - - j = iwl4965_get_prev_ieee_rate(i); - if (j == i) - break; - i = j; - } - - /* - * Display the average rate of all samples taken. - * NOTE: We multiply # of samples by 2 since the IEEE measurement - * added from iwl_rates is actually 2X the rate. - */ - if (samples) - cnt += sprintf(&buf[cnt], - "\nAverage rate is %3d.%02dMbs over last %4dms\n" - "%3d%% success (%d good packets over %d tries)\n", - success / (2 * samples), (success * 5 / samples) % 10, - max_time, good * 100 / samples, good, samples); - else - cnt += sprintf(&buf[cnt], "\nAverage rate: 0Mbs\n"); - - cnt += sprintf(&buf[cnt], "\nrate scale type %d antenna %d " - "active_search %d rate index %d\n", lq_type, antenna, - lq_sta->search_better_tbl, sta->last_txrate_idx); - - rcu_read_unlock(); - return cnt; -} - -int iwl4965_rate_control_register(void) -{ - return ieee80211_rate_control_register(&rs_ops); -} - -void iwl4965_rate_control_unregister(void) -{ - ieee80211_rate_control_unregister(&rs_ops); -} - |