diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-6000.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-6000.c | 333 |
1 files changed, 96 insertions, 237 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index a848ca06dc6f..af505bcd7ae0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -182,7 +182,11 @@ static int iwl6000_hw_set_hw_params(struct iwl_priv *priv) priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR; priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant); - priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant); + if (priv->cfg->rx_with_siso_diversity) + priv->hw_params.rx_chains_num = 1; + else + priv->hw_params.rx_chains_num = + num_of_ant(priv->cfg->valid_rx_ant); priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant; priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant; @@ -511,7 +515,7 @@ static struct iwl_base_params iwl6050_base_params = { .chain_noise_calib_by_driver = true, .shadow_reg_enable = true, }; -static struct iwl_base_params iwl6000_coex_base_params = { +static struct iwl_base_params iwl6000_g2_base_params = { .eeprom_size = OTP_LOW_IMAGE_SIZE, .num_of_queues = IWLAGN_NUM_QUEUES, .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, @@ -520,7 +524,7 @@ static struct iwl_base_params iwl6000_coex_base_params = { .use_bsm = false, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, - .led_compensation = 51, + .led_compensation = 57, .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .supports_idle = true, .adv_thermal_throttle = true, @@ -550,243 +554,151 @@ static struct iwl_bt_params iwl6000_bt_params = { .bt_sco_disable = true, }; +#define IWL_DEVICE_6005 \ + .fw_name_pre = IWL6000G2A_FW_PRE, \ + .ucode_api_max = IWL6000G2_UCODE_API_MAX, \ + .ucode_api_min = IWL6000G2_UCODE_API_MIN, \ + .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, \ + .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, \ + .ops = &iwl6000_ops, \ + .mod_params = &iwlagn_mod_params, \ + .base_params = &iwl6000_g2_base_params, \ + .need_dc_calib = true, \ + .need_temp_offset_calib = true, \ + .led_mode = IWL_LED_RF_STATE + struct iwl_cfg iwl6005_2agn_cfg = { .name = "Intel(R) Centrino(R) Advanced-N 6205 AGN", - .fw_name_pre = IWL6000G2A_FW_PRE, - .ucode_api_max = IWL6000G2_UCODE_API_MAX, - .ucode_api_min = IWL6000G2_UCODE_API_MIN, - .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, - .ops = &iwl6000_ops, - .mod_params = &iwlagn_mod_params, - .base_params = &iwl6000_base_params, + IWL_DEVICE_6005, .ht_params = &iwl6000_ht_params, - .need_dc_calib = true, - .need_temp_offset_calib = true, - .led_mode = IWL_LED_RF_STATE, - .use_new_eeprom_reading = true, }; struct iwl_cfg iwl6005_2abg_cfg = { .name = "Intel(R) Centrino(R) Advanced-N 6205 ABG", - .fw_name_pre = IWL6000G2A_FW_PRE, - .ucode_api_max = IWL6000G2_UCODE_API_MAX, - .ucode_api_min = IWL6000G2_UCODE_API_MIN, - .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, - .ops = &iwl6000_ops, - .mod_params = &iwlagn_mod_params, - .base_params = &iwl6000_base_params, - .need_dc_calib = true, - .need_temp_offset_calib = true, - .led_mode = IWL_LED_RF_STATE, - .use_new_eeprom_reading = true, + IWL_DEVICE_6005, }; struct iwl_cfg iwl6005_2bg_cfg = { .name = "Intel(R) Centrino(R) Advanced-N 6205 BG", - .fw_name_pre = IWL6000G2A_FW_PRE, - .ucode_api_max = IWL6000G2_UCODE_API_MAX, - .ucode_api_min = IWL6000G2_UCODE_API_MIN, - .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, - .ops = &iwl6000_ops, - .mod_params = &iwlagn_mod_params, - .base_params = &iwl6000_base_params, - .need_dc_calib = true, - .need_temp_offset_calib = true, - .led_mode = IWL_LED_RF_STATE, - .use_new_eeprom_reading = true, -}; + IWL_DEVICE_6005, +}; + +#define IWL_DEVICE_6030 \ + .fw_name_pre = IWL6000G2B_FW_PRE, \ + .ucode_api_max = IWL6000G2_UCODE_API_MAX, \ + .ucode_api_min = IWL6000G2_UCODE_API_MIN, \ + .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, \ + .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, \ + .ops = &iwl6000g2b_ops, \ + .mod_params = &iwlagn_mod_params, \ + .base_params = &iwl6000_g2_base_params, \ + .bt_params = &iwl6000_bt_params, \ + .need_dc_calib = true, \ + .need_temp_offset_calib = true, \ + .led_mode = IWL_LED_RF_STATE, \ + .adv_pm = true \ struct iwl_cfg iwl6030_2agn_cfg = { .name = "Intel(R) Centrino(R) Advanced-N 6230 AGN", - .fw_name_pre = IWL6000G2B_FW_PRE, - .ucode_api_max = IWL6000G2_UCODE_API_MAX, - .ucode_api_min = IWL6000G2_UCODE_API_MIN, - .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, - .ops = &iwl6000g2b_ops, - .mod_params = &iwlagn_mod_params, - .base_params = &iwl6000_coex_base_params, - .bt_params = &iwl6000_bt_params, + IWL_DEVICE_6030, .ht_params = &iwl6000_ht_params, - .need_dc_calib = true, - .need_temp_offset_calib = true, - .led_mode = IWL_LED_RF_STATE, - .adv_pm = true, - /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ - .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, - .use_new_eeprom_reading = true, }; struct iwl_cfg iwl6030_2abg_cfg = { .name = "Intel(R) Centrino(R) Advanced-N 6230 ABG", - .fw_name_pre = IWL6000G2B_FW_PRE, - .ucode_api_max = IWL6000G2_UCODE_API_MAX, - .ucode_api_min = IWL6000G2_UCODE_API_MIN, - .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, - .ops = &iwl6000g2b_ops, - .mod_params = &iwlagn_mod_params, - .base_params = &iwl6000_coex_base_params, - .bt_params = &iwl6000_bt_params, - .need_dc_calib = true, - .need_temp_offset_calib = true, - .led_mode = IWL_LED_RF_STATE, - .adv_pm = true, - /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ - .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, - .use_new_eeprom_reading = true, + IWL_DEVICE_6030, }; struct iwl_cfg iwl6030_2bgn_cfg = { .name = "Intel(R) Centrino(R) Advanced-N 6230 BGN", - .fw_name_pre = IWL6000G2B_FW_PRE, - .ucode_api_max = IWL6000G2_UCODE_API_MAX, - .ucode_api_min = IWL6000G2_UCODE_API_MIN, - .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, - .ops = &iwl6000g2b_ops, - .mod_params = &iwlagn_mod_params, - .base_params = &iwl6000_coex_base_params, - .bt_params = &iwl6000_bt_params, + IWL_DEVICE_6030, .ht_params = &iwl6000_ht_params, - .need_dc_calib = true, - .need_temp_offset_calib = true, - .led_mode = IWL_LED_RF_STATE, - .adv_pm = true, - /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ - .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, - .use_new_eeprom_reading = true, }; struct iwl_cfg iwl6030_2bg_cfg = { .name = "Intel(R) Centrino(R) Advanced-N 6230 BG", - .fw_name_pre = IWL6000G2B_FW_PRE, - .ucode_api_max = IWL6000G2_UCODE_API_MAX, - .ucode_api_min = IWL6000G2_UCODE_API_MIN, - .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, - .ops = &iwl6000g2b_ops, - .mod_params = &iwlagn_mod_params, - .base_params = &iwl6000_coex_base_params, - .bt_params = &iwl6000_bt_params, - .need_dc_calib = true, - .need_temp_offset_calib = true, - .led_mode = IWL_LED_RF_STATE, - .adv_pm = true, - /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ - .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, - .use_new_eeprom_reading = true, + IWL_DEVICE_6030, }; struct iwl_cfg iwl1030_bgn_cfg = { .name = "Intel(R) Centrino(R) Wireless-N 1030 BGN", - .fw_name_pre = IWL6000G2B_FW_PRE, - .ucode_api_max = IWL6000G2_UCODE_API_MAX, - .ucode_api_min = IWL6000G2_UCODE_API_MIN, - .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, - .ops = &iwl6000g2b_ops, - .mod_params = &iwlagn_mod_params, - .base_params = &iwl6000_coex_base_params, - .bt_params = &iwl6000_bt_params, + IWL_DEVICE_6030, .ht_params = &iwl6000_ht_params, - .need_dc_calib = true, - .need_temp_offset_calib = true, - .led_mode = IWL_LED_RF_STATE, - .adv_pm = true, - /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ - .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, - .use_new_eeprom_reading = true, }; struct iwl_cfg iwl1030_bg_cfg = { .name = "Intel(R) Centrino(R) Wireless-N 1030 BG", - .fw_name_pre = IWL6000G2B_FW_PRE, - .ucode_api_max = IWL6000G2_UCODE_API_MAX, - .ucode_api_min = IWL6000G2_UCODE_API_MIN, - .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, - .ops = &iwl6000g2b_ops, - .mod_params = &iwlagn_mod_params, - .base_params = &iwl6000_coex_base_params, - .bt_params = &iwl6000_bt_params, - .need_dc_calib = true, - .need_temp_offset_calib = true, - .led_mode = IWL_LED_RF_STATE, - .adv_pm = true, - /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ - .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, - .use_new_eeprom_reading = true, + IWL_DEVICE_6030, +}; + +struct iwl_cfg iwl130_bgn_cfg = { + .name = "Intel(R) Centrino(R) Wireless-N 130 BGN", + IWL_DEVICE_6030, + .ht_params = &iwl6000_ht_params, + .rx_with_siso_diversity = true, +}; + +struct iwl_cfg iwl130_bg_cfg = { + .name = "Intel(R) Centrino(R) Wireless-N 130 BG", + IWL_DEVICE_6030, + .rx_with_siso_diversity = true, }; /* * "i": Internal configuration, use internal Power Amplifier */ +#define IWL_DEVICE_6000i \ + .fw_name_pre = IWL6000_FW_PRE, \ + .ucode_api_max = IWL6000_UCODE_API_MAX, \ + .ucode_api_min = IWL6000_UCODE_API_MIN, \ + .valid_tx_ant = ANT_BC, /* .cfg overwrite */ \ + .valid_rx_ant = ANT_BC, /* .cfg overwrite */ \ + .eeprom_ver = EEPROM_6000_EEPROM_VERSION, \ + .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, \ + .ops = &iwl6000_ops, \ + .mod_params = &iwlagn_mod_params, \ + .base_params = &iwl6000_base_params, \ + .pa_type = IWL_PA_INTERNAL, \ + .led_mode = IWL_LED_BLINK + struct iwl_cfg iwl6000i_2agn_cfg = { .name = "Intel(R) Centrino(R) Advanced-N 6200 AGN", - .fw_name_pre = IWL6000_FW_PRE, - .ucode_api_max = IWL6000_UCODE_API_MAX, - .ucode_api_min = IWL6000_UCODE_API_MIN, - .valid_tx_ant = ANT_BC, /* .cfg overwrite */ - .valid_rx_ant = ANT_BC, /* .cfg overwrite */ - .eeprom_ver = EEPROM_6000_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, - .ops = &iwl6000_ops, - .mod_params = &iwlagn_mod_params, - .base_params = &iwl6000_base_params, + IWL_DEVICE_6000i, .ht_params = &iwl6000_ht_params, - .pa_type = IWL_PA_INTERNAL, - .led_mode = IWL_LED_BLINK, }; struct iwl_cfg iwl6000i_2abg_cfg = { .name = "Intel(R) Centrino(R) Advanced-N 6200 ABG", - .fw_name_pre = IWL6000_FW_PRE, - .ucode_api_max = IWL6000_UCODE_API_MAX, - .ucode_api_min = IWL6000_UCODE_API_MIN, - .valid_tx_ant = ANT_BC, /* .cfg overwrite */ - .valid_rx_ant = ANT_BC, /* .cfg overwrite */ - .eeprom_ver = EEPROM_6000_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, - .ops = &iwl6000_ops, - .mod_params = &iwlagn_mod_params, - .base_params = &iwl6000_base_params, - .pa_type = IWL_PA_INTERNAL, - .led_mode = IWL_LED_BLINK, + IWL_DEVICE_6000i, }; struct iwl_cfg iwl6000i_2bg_cfg = { .name = "Intel(R) Centrino(R) Advanced-N 6200 BG", - .fw_name_pre = IWL6000_FW_PRE, - .ucode_api_max = IWL6000_UCODE_API_MAX, - .ucode_api_min = IWL6000_UCODE_API_MIN, - .valid_tx_ant = ANT_BC, /* .cfg overwrite */ - .valid_rx_ant = ANT_BC, /* .cfg overwrite */ - .eeprom_ver = EEPROM_6000_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, - .ops = &iwl6000_ops, - .mod_params = &iwlagn_mod_params, - .base_params = &iwl6000_base_params, - .pa_type = IWL_PA_INTERNAL, - .led_mode = IWL_LED_BLINK, -}; + IWL_DEVICE_6000i, +}; + +#define IWL_DEVICE_6050 \ + .fw_name_pre = IWL6050_FW_PRE, \ + .ucode_api_max = IWL6050_UCODE_API_MAX, \ + .ucode_api_min = IWL6050_UCODE_API_MIN, \ + .ops = &iwl6050_ops, \ + .eeprom_ver = EEPROM_6050_EEPROM_VERSION, \ + .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, \ + .mod_params = &iwlagn_mod_params, \ + .base_params = &iwl6050_base_params, \ + .need_dc_calib = true, \ + .led_mode = IWL_LED_BLINK, \ + .internal_wimax_coex = true struct iwl_cfg iwl6050_2agn_cfg = { .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN", - .fw_name_pre = IWL6050_FW_PRE, - .ucode_api_max = IWL6050_UCODE_API_MAX, - .ucode_api_min = IWL6050_UCODE_API_MIN, - .ops = &iwl6050_ops, - .eeprom_ver = EEPROM_6050_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, - .mod_params = &iwlagn_mod_params, - .base_params = &iwl6050_base_params, + IWL_DEVICE_6050, .ht_params = &iwl6000_ht_params, - .need_dc_calib = true, - .led_mode = IWL_LED_BLINK, +}; + +struct iwl_cfg iwl6050_2abg_cfg = { + .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG", + IWL_DEVICE_6050, }; struct iwl_cfg iwl6150_bgn_cfg = { @@ -802,21 +714,7 @@ struct iwl_cfg iwl6150_bgn_cfg = { .ht_params = &iwl6000_ht_params, .need_dc_calib = true, .led_mode = IWL_LED_RF_STATE, - .use_new_eeprom_reading = true, -}; - -struct iwl_cfg iwl6050_2abg_cfg = { - .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG", - .fw_name_pre = IWL6050_FW_PRE, - .ucode_api_max = IWL6050_UCODE_API_MAX, - .ucode_api_min = IWL6050_UCODE_API_MIN, - .eeprom_ver = EEPROM_6050_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, - .ops = &iwl6050_ops, - .mod_params = &iwlagn_mod_params, - .base_params = &iwl6050_base_params, - .need_dc_calib = true, - .led_mode = IWL_LED_BLINK, + .internal_wimax_coex = true, }; struct iwl_cfg iwl6000_3agn_cfg = { @@ -834,45 +732,6 @@ struct iwl_cfg iwl6000_3agn_cfg = { .led_mode = IWL_LED_BLINK, }; -struct iwl_cfg iwl130_bgn_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N 130 BGN", - .fw_name_pre = IWL6000G2B_FW_PRE, - .ucode_api_max = IWL6000G2_UCODE_API_MAX, - .ucode_api_min = IWL6000G2_UCODE_API_MIN, - .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, - .ops = &iwl6000g2b_ops, - .mod_params = &iwlagn_mod_params, - .base_params = &iwl6000_coex_base_params, - .bt_params = &iwl6000_bt_params, - .ht_params = &iwl6000_ht_params, - .need_dc_calib = true, - .led_mode = IWL_LED_RF_STATE, - .adv_pm = true, - /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ - .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, - .use_new_eeprom_reading = true, -}; - -struct iwl_cfg iwl130_bg_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N 130 BG", - .fw_name_pre = IWL6000G2B_FW_PRE, - .ucode_api_max = IWL6000G2_UCODE_API_MAX, - .ucode_api_min = IWL6000G2_UCODE_API_MIN, - .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION, - .ops = &iwl6000g2b_ops, - .mod_params = &iwlagn_mod_params, - .base_params = &iwl6000_coex_base_params, - .bt_params = &iwl6000_bt_params, - .need_dc_calib = true, - .led_mode = IWL_LED_RF_STATE, - .adv_pm = true, - /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ - .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, - .use_new_eeprom_reading = true, -}; - MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX)); MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX)); MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX)); |