aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwlwifi/iwl-commands.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-commands.h')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-commands.h62
1 files changed, 46 insertions, 16 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index c87033bf3ad2..2c5c88fc38f5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -283,7 +283,7 @@ struct iwl3945_power_per_rate {
* 1) Dual stream (MIMO)
* 2) Triple stream (MIMO)
*
- * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps FAT duplicate data
+ * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data
*
* Legacy OFDM rate format for bits 7:0 (bit 8 must be "0", bit 9 "0"):
* 3-0: 0xD) 6 Mbps
@@ -320,11 +320,11 @@ struct iwl3945_power_per_rate {
#define RATE_MCS_GF_POS 10
#define RATE_MCS_GF_MSK 0x400
-/* Bit 11: (1) Use 40Mhz FAT chnl width, (0) use 20 MHz legacy chnl width */
-#define RATE_MCS_FAT_POS 11
-#define RATE_MCS_FAT_MSK 0x800
+/* Bit 11: (1) Use 40Mhz HT40 chnl width, (0) use 20 MHz legacy chnl width */
+#define RATE_MCS_HT40_POS 11
+#define RATE_MCS_HT40_MSK 0x800
-/* Bit 12: (1) Duplicate data on both 20MHz chnls. FAT (bit 11) must be set. */
+/* Bit 12: (1) Duplicate data on both 20MHz chnls. HT40 (bit 11) must be set. */
#define RATE_MCS_DUP_POS 12
#define RATE_MCS_DUP_MSK 0x1000
@@ -459,7 +459,7 @@ struct iwl_init_alive_resp {
/* calibration values from "initialize" uCode */
__le32 voltage; /* signed, higher value is lower voltage */
- __le32 therm_r1[2]; /* signed, 1st for normal, 2nd for FAT channel*/
+ __le32 therm_r1[2]; /* signed, 1st for normal, 2nd for HT40 */
__le32 therm_r2[2]; /* signed */
__le32 therm_r3[2]; /* signed */
__le32 therm_r4[2]; /* signed */
@@ -610,7 +610,7 @@ enum {
#define RXON_FLG_HT_OPERATING_MODE_POS (23)
#define RXON_FLG_HT_PROT_MSK cpu_to_le32(0x1 << 23)
-#define RXON_FLG_FAT_PROT_MSK cpu_to_le32(0x2 << 23)
+#define RXON_FLG_HT40_PROT_MSK cpu_to_le32(0x2 << 23)
#define RXON_FLG_CHANNEL_MODE_POS (25)
#define RXON_FLG_CHANNEL_MODE_MSK cpu_to_le32(0x3 << 25)
@@ -765,6 +765,8 @@ struct iwl5000_rxon_assoc_cmd {
} __attribute__ ((packed));
#define IWL_CONN_MAX_LISTEN_INTERVAL 10
+#define IWL_MAX_UCODE_BEACON_INTERVAL 4 /* 4096 */
+#define IWL39_MAX_UCODE_BEACON_INTERVAL 1 /* 1024 */
/*
* REPLY_RXON_TIMING = 0x14 (command, has simple generic response)
@@ -884,12 +886,11 @@ struct iwl_qosparam_cmd {
#define STA_FLG_TX_RATE_MSK cpu_to_le32(1 << 2);
#define STA_FLG_PWR_SAVE_MSK cpu_to_le32(1 << 8);
-#define STA_FLG_PWR_SAVE_MSK cpu_to_le32(1 << 8);
#define STA_FLG_RTS_MIMO_PROT_MSK cpu_to_le32(1 << 17)
#define STA_FLG_AGG_MPDU_8US_MSK cpu_to_le32(1 << 18)
#define STA_FLG_MAX_AGG_SIZE_POS (19)
#define STA_FLG_MAX_AGG_SIZE_MSK cpu_to_le32(3 << 19)
-#define STA_FLG_FAT_EN_MSK cpu_to_le32(1 << 21)
+#define STA_FLG_HT40_EN_MSK cpu_to_le32(1 << 21)
#define STA_FLG_MIMO_DIS_MSK cpu_to_le32(1 << 22)
#define STA_FLG_AGG_MPDU_DENSITY_POS (23)
#define STA_FLG_AGG_MPDU_DENSITY_MSK cpu_to_le32(7 << 23)
@@ -1154,6 +1155,7 @@ struct iwl_wep_cmd {
#define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK cpu_to_le16(1 << 2)
#define RX_RES_PHY_FLAGS_NARROW_BAND_MSK cpu_to_le16(1 << 3)
#define RX_RES_PHY_FLAGS_ANTENNA_MSK cpu_to_le16(0xf0)
+#define RX_RES_PHY_FLAGS_ANTENNA_POS 4
#define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8)
#define RX_RES_STATUS_SEC_TYPE_NONE (0x0 << 8)
@@ -1922,7 +1924,7 @@ struct iwl_link_qual_general_params {
#define LINK_QUAL_AGG_DISABLE_START_MIN (0)
#define LINK_QUAL_AGG_FRAME_LIMIT_DEF (31)
-#define LINK_QUAL_AGG_FRAME_LIMIT_MAX (64)
+#define LINK_QUAL_AGG_FRAME_LIMIT_MAX (63)
#define LINK_QUAL_AGG_FRAME_LIMIT_MIN (0)
/**
@@ -1982,10 +1984,10 @@ struct iwl_link_qual_agg_params {
* a) Use this same initial rate for first 3 entries.
* b) Find next lower available rate using same mode (SISO or MIMO),
* use for next 3 entries. If no lower rate available, switch to
- * legacy mode (no FAT channel, no MIMO, no short guard interval).
+ * legacy mode (no HT40 channel, no MIMO, no short guard interval).
* c) If using MIMO, set command's mimo_delimiter to number of entries
* using MIMO (3 or 6).
- * d) After trying 2 HT rates, switch to legacy mode (no FAT channel,
+ * d) After trying 2 HT rates, switch to legacy mode (no HT40 channel,
* no MIMO, no short guard interval), at the next lower bit rate
* (e.g. if second HT bit rate was 54, try 48 legacy), and follow
* legacy procedure for remaining table entries.
@@ -2311,15 +2313,22 @@ struct iwl_spectrum_notification {
* PM allow:
* bit 0 - '0' Driver not allow power management
* '1' Driver allow PM (use rest of parameters)
+ *
* uCode send sleep notifications:
* bit 1 - '0' Don't send sleep notification
* '1' send sleep notification (SEND_PM_NOTIFICATION)
+ *
* Sleep over DTIM
* bit 2 - '0' PM have to walk up every DTIM
* '1' PM could sleep over DTIM till listen Interval.
+ *
* PCI power managed
* bit 3 - '0' (PCI_CFG_LINK_CTRL & 0x1)
* '1' !(PCI_CFG_LINK_CTRL & 0x1)
+ *
+ * Fast PD
+ * bit 4 - '1' Put radio to sleep when receiving frame for others
+ *
* Force sleep Modes
* bit 31/30- '00' use both mac/xtal sleeps
* '01' force Mac sleep
@@ -2411,6 +2420,13 @@ struct iwl_ct_kill_config {
__le32 critical_temperature_R;
} __attribute__ ((packed));
+/* 1000, and 6x00 */
+struct iwl_ct_kill_throttling_config {
+ __le32 critical_temperature_exit;
+ __le32 reserved;
+ __le32 critical_temperature_enter;
+} __attribute__ ((packed));
+
/******************************************************************************
* (8)
* Scan Commands, Responses, Notifications:
@@ -2913,6 +2929,20 @@ struct statistics_rx {
struct statistics_rx_ht_phy ofdm_ht;
} __attribute__ ((packed));
+/**
+ * struct statistics_tx_power - current tx power
+ *
+ * @ant_a: current tx power on chain a in 1/2 dB step
+ * @ant_b: current tx power on chain b in 1/2 dB step
+ * @ant_c: current tx power on chain c in 1/2 dB step
+ */
+struct statistics_tx_power {
+ u8 ant_a;
+ u8 ant_b;
+ u8 ant_c;
+ u8 reserved;
+} __attribute__ ((packed));
+
struct statistics_tx_non_phy_agg {
__le32 ba_timeout;
__le32 ba_reschedule_frames;
@@ -2924,8 +2954,6 @@ struct statistics_tx_non_phy_agg {
__le32 underrun;
__le32 bt_prio_kill;
__le32 rx_ba_rsp_cnt;
- __le32 reserved2;
- __le32 reserved3;
} __attribute__ ((packed));
struct statistics_tx {
@@ -2944,6 +2972,8 @@ struct statistics_tx {
__le32 cts_timeout_collision;
__le32 ack_or_ba_timeout_collision;
struct statistics_tx_non_phy_agg agg;
+ struct statistics_tx_power tx_power;
+ __le32 reserved1;
} __attribute__ ((packed));
@@ -3008,7 +3038,7 @@ struct iwl_statistics_cmd {
* one channel that has just been scanned.
*/
#define STATISTICS_REPLY_FLG_BAND_24G_MSK cpu_to_le32(0x2)
-#define STATISTICS_REPLY_FLG_FAT_MODE_MSK cpu_to_le32(0x8)
+#define STATISTICS_REPLY_FLG_HT40_MODE_MSK cpu_to_le32(0x8)
struct iwl3945_notif_statistics {
__le32 flag;
@@ -3465,7 +3495,7 @@ struct iwl_wimax_coex_cmd {
*****************************************************************************/
struct iwl_rx_packet {
- __le32 len;
+ __le32 len_n_flags;
struct iwl_cmd_header hdr;
union {
struct iwl3945_rx_frame rx_frame;