diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-fw-file.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-fw-file.h | 53 |
1 files changed, 48 insertions, 5 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-fw-file.h b/drivers/net/wireless/iwlwifi/iwl-fw-file.h index a9b5ae4ebec0..84653e3d02ba 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw-file.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw-file.h @@ -132,12 +132,14 @@ enum iwl_ucode_tlv_type { IWL_UCODE_TLV_API_CHANGES_SET = 29, IWL_UCODE_TLV_ENABLED_CAPABILITIES = 30, IWL_UCODE_TLV_N_SCAN_CHANNELS = 31, + IWL_UCODE_TLV_PAGING = 32, IWL_UCODE_TLV_SEC_RT_USNIFFER = 34, IWL_UCODE_TLV_SDIO_ADMA_ADDR = 35, IWL_UCODE_TLV_FW_VERSION = 36, IWL_UCODE_TLV_FW_DBG_DEST = 38, IWL_UCODE_TLV_FW_DBG_CONF = 39, IWL_UCODE_TLV_FW_DBG_TRIGGER = 40, + IWL_UCODE_TLV_FW_GSCAN_CAPA = 50, }; struct iwl_ucode_tlv { @@ -247,9 +249,7 @@ typedef unsigned int __bitwise__ iwl_ucode_tlv_api_t; * @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source. * IWL_UCODE_TLV_API_HDC_PHASE_0: ucode supports finer configuration of LTR * @IWL_UCODE_TLV_API_TX_POWER_DEV: new API for tx power. - * @IWL_UCODE_TLV_API_BASIC_DWELL: use only basic dwell time in scan command, - * regardless of the band or the number of the probes. FW will calculate - * the actual dwell time. + * @IWL_UCODE_TLV_API_WIDE_CMD_HDR: ucode supports wide command header * @IWL_UCODE_TLV_API_SCD_CFG: This firmware can configure the scheduler * through the dedicated host command. * @IWL_UCODE_TLV_API_SINGLE_SCAN_EBS: EBS is supported for single scans too. @@ -259,6 +259,8 @@ typedef unsigned int __bitwise__ iwl_ucode_tlv_api_t; * @IWL_UCODE_TLV_API_NEW_VERSION: new versioning format * @IWL_UCODE_TLV_API_EXT_SCAN_PRIORITY: scan APIs use 8-level priority * instead of 3. + * @IWL_UCODE_TLV_API_TX_POWER_CHAIN: TX power API has larger command size + * (command version 3) that supports per-chain limits */ enum iwl_ucode_tlv_api { IWL_UCODE_TLV_API_BT_COEX_SPLIT = (__force iwl_ucode_tlv_api_t)3, @@ -266,7 +268,7 @@ enum iwl_ucode_tlv_api { IWL_UCODE_TLV_API_WIFI_MCC_UPDATE = (__force iwl_ucode_tlv_api_t)9, IWL_UCODE_TLV_API_HDC_PHASE_0 = (__force iwl_ucode_tlv_api_t)10, IWL_UCODE_TLV_API_TX_POWER_DEV = (__force iwl_ucode_tlv_api_t)11, - IWL_UCODE_TLV_API_BASIC_DWELL = (__force iwl_ucode_tlv_api_t)13, + IWL_UCODE_TLV_API_WIDE_CMD_HDR = (__force iwl_ucode_tlv_api_t)14, IWL_UCODE_TLV_API_SCD_CFG = (__force iwl_ucode_tlv_api_t)15, IWL_UCODE_TLV_API_SINGLE_SCAN_EBS = (__force iwl_ucode_tlv_api_t)16, IWL_UCODE_TLV_API_ASYNC_DTM = (__force iwl_ucode_tlv_api_t)17, @@ -274,6 +276,7 @@ enum iwl_ucode_tlv_api { IWL_UCODE_TLV_API_STATS_V10 = (__force iwl_ucode_tlv_api_t)19, IWL_UCODE_TLV_API_NEW_VERSION = (__force iwl_ucode_tlv_api_t)20, IWL_UCODE_TLV_API_EXT_SCAN_PRIORITY = (__force iwl_ucode_tlv_api_t)24, + IWL_UCODE_TLV_API_TX_POWER_CHAIN = (__force iwl_ucode_tlv_api_t)27, }; typedef unsigned int __bitwise__ iwl_ucode_tlv_capa_t; @@ -284,6 +287,7 @@ typedef unsigned int __bitwise__ iwl_ucode_tlv_capa_t; * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan. * @IWL_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer + * @IWL_UCODE_TLV_CAPA_TOF_SUPPORT: supports Time of Flight (802.11mc FTM) * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current * tx power value into TPC Report action frame and Link Measurement Report @@ -298,6 +302,7 @@ typedef unsigned int __bitwise__ iwl_ucode_tlv_capa_t; * @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command * @IWL_UCODE_TLV_CAPA_DC2DC_SUPPORT: supports DC2DC Command + * @IWL_UCODE_TLV_CAPA_CSUM_SUPPORT: supports TCP Checksum Offload * @IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics * @IWL_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running * @IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different @@ -305,12 +310,14 @@ typedef unsigned int __bitwise__ iwl_ucode_tlv_capa_t; * IWL_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR * is supported. * @IWL_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC + * @IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan */ enum iwl_ucode_tlv_capa { IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = (__force iwl_ucode_tlv_capa_t)0, IWL_UCODE_TLV_CAPA_LAR_SUPPORT = (__force iwl_ucode_tlv_capa_t)1, IWL_UCODE_TLV_CAPA_UMAC_SCAN = (__force iwl_ucode_tlv_capa_t)2, IWL_UCODE_TLV_CAPA_BEAMFORMER = (__force iwl_ucode_tlv_capa_t)3, + IWL_UCODE_TLV_CAPA_TOF_SUPPORT = (__force iwl_ucode_tlv_capa_t)5, IWL_UCODE_TLV_CAPA_TDLS_SUPPORT = (__force iwl_ucode_tlv_capa_t)6, IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT = (__force iwl_ucode_tlv_capa_t)8, IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT = (__force iwl_ucode_tlv_capa_t)9, @@ -320,10 +327,12 @@ enum iwl_ucode_tlv_capa { IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH = (__force iwl_ucode_tlv_capa_t)13, IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = (__force iwl_ucode_tlv_capa_t)18, IWL_UCODE_TLV_CAPA_DC2DC_CONFIG_SUPPORT = (__force iwl_ucode_tlv_capa_t)19, + IWL_UCODE_TLV_CAPA_CSUM_SUPPORT = (__force iwl_ucode_tlv_capa_t)21, IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS = (__force iwl_ucode_tlv_capa_t)22, IWL_UCODE_TLV_CAPA_BT_COEX_PLCR = (__force iwl_ucode_tlv_capa_t)28, IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC = (__force iwl_ucode_tlv_capa_t)29, IWL_UCODE_TLV_CAPA_BT_COEX_RRC = (__force iwl_ucode_tlv_capa_t)30, + IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT = (__force iwl_ucode_tlv_capa_t)31, }; /* The default calibrate table size if not specified by firmware file */ @@ -341,8 +350,9 @@ enum iwl_ucode_tlv_capa { * For 16.0 uCode and above, there is no differentiation between sections, * just an offset to the HW address. */ -#define IWL_UCODE_SECTION_MAX 12 +#define IWL_UCODE_SECTION_MAX 16 #define CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC +#define PAGING_SEPARATOR_SECTION 0xAAAABBBB /* uCode version contains 4 values: Major/Minor/API/Serial */ #define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24) @@ -412,6 +422,12 @@ enum iwl_fw_dbg_reg_operator { PRPH_ASSIGN, PRPH_SETBIT, PRPH_CLEARBIT, + + INDIRECT_ASSIGN, + INDIRECT_SETBIT, + INDIRECT_CLEARBIT, + + PRPH_BLOCKBIT, }; /** @@ -485,10 +501,13 @@ struct iwl_fw_dbg_conf_hcmd { * * @IWL_FW_DBG_TRIGGER_START: when trigger occurs re-conf the dbg mechanism * @IWL_FW_DBG_TRIGGER_STOP: when trigger occurs pull the dbg data + * @IWL_FW_DBG_TRIGGER_MONITOR_ONLY: when trigger occurs trigger is set to + * collect only monitor data */ enum iwl_fw_dbg_trigger_mode { IWL_FW_DBG_TRIGGER_START = BIT(0), IWL_FW_DBG_TRIGGER_STOP = BIT(1), + IWL_FW_DBG_TRIGGER_MONITOR_ONLY = BIT(2), }; /** @@ -718,4 +737,28 @@ struct iwl_fw_dbg_conf_tlv { struct iwl_fw_dbg_conf_hcmd hcmd; } __packed; +/** + * struct iwl_fw_gscan_capabilities - gscan capabilities supported by FW + * @max_scan_cache_size: total space allocated for scan results (in bytes). + * @max_scan_buckets: maximum number of channel buckets. + * @max_ap_cache_per_scan: maximum number of APs that can be stored per scan. + * @max_rssi_sample_size: number of RSSI samples used for averaging RSSI. + * @max_scan_reporting_threshold: max possible report threshold. in percentage. + * @max_hotlist_aps: maximum number of entries for hotlist APs. + * @max_significant_change_aps: maximum number of entries for significant + * change APs. + * @max_bssid_history_entries: number of BSSID/RSSI entries that the device can + * hold. + */ +struct iwl_fw_gscan_capabilities { + __le32 max_scan_cache_size; + __le32 max_scan_buckets; + __le32 max_ap_cache_per_scan; + __le32 max_rssi_sample_size; + __le32 max_scan_reporting_threshold; + __le32 max_hotlist_aps; + __le32 max_significant_change_aps; + __le32 max_bssid_history_entries; +} __packed; + #endif /* __iwl_fw_file_h__ */ |