diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-shared.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-shared.h | 482 |
1 files changed, 482 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-shared.h b/drivers/net/wireless/iwlwifi/iwl-shared.h new file mode 100644 index 000000000000..d987bee5e6ce --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-shared.h @@ -0,0 +1,482 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +#ifndef __iwl_shared_h__ +#define __iwl_shared_h__ + +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/mutex.h> +#include <linux/gfp.h> +#include <linux/mm.h> /* for page_address */ +#include <net/mac80211.h> + +#include "iwl-commands.h" + +/*This files includes all the types / functions that are exported by the + * upper layer to the bus and transport layer */ + +struct iwl_cfg; +struct iwl_bus; +struct iwl_priv; +struct iwl_sensitivity_ranges; +struct iwl_trans_ops; + +#define DRV_NAME "iwlagn" +#define IWLWIFI_VERSION "in-tree:" +#define DRV_COPYRIGHT "Copyright(c) 2003-2011 Intel Corporation" +#define DRV_AUTHOR "<ilw@linux.intel.com>" + +extern struct iwl_mod_params iwlagn_mod_params; + +/** + * struct iwl_mod_params + * @sw_crypto: using hardware encryption, default = 0 + * @num_of_queues: number of tx queue, HW dependent + * @disable_11n: 11n capabilities enabled, default = 0 + * @amsdu_size_8K: enable 8K amsdu size, default = 1 + * @antenna: both antennas (use diversity), default = 0 + * @restart_fw: restart firmware, default = 1 + * @plcp_check: enable plcp health check, default = true + * @ack_check: disable ack health check, default = false + * @wd_disable: enable stuck queue check, default = false + * @bt_coex_active: enable bt coex, default = true + * @led_mode: system default, default = 0 + * @no_sleep_autoadjust: disable autoadjust, default = true + * @power_save: disable power save, default = false + * @power_level: power level, default = 1 + * @debug_level: levels are IWL_DL_* + * @ant_coupling: antenna coupling in dB, default = 0 + * @bt_ch_announce: BT channel inhibition, default = enable + * @wanted_ucode_alternative: ucode alternative to use, default = 1 + * @auto_agg: enable agg. without check, default = true + */ +struct iwl_mod_params { + int sw_crypto; + int num_of_queues; + int disable_11n; + int amsdu_size_8K; + int antenna; + int restart_fw; + bool plcp_check; + bool ack_check; + bool wd_disable; + bool bt_coex_active; + int led_mode; + bool no_sleep_autoadjust; + bool power_save; + int power_level; + u32 debug_level; + int ant_coupling; + bool bt_ch_announce; + int wanted_ucode_alternative; + bool auto_agg; +}; + +/** + * struct iwl_hw_params + * @max_txq_num: Max # Tx queues supported + * @num_ampdu_queues: num of ampdu queues + * @tx/rx_chains_num: Number of TX/RX chains + * @valid_tx/rx_ant: usable antennas + * @max_stations: + * @ht40_channel: is 40MHz width possible in band 2.4 + * @beacon_time_tsf_bits: number of valid tsf bits for beacon time + * @sku: + * @rx_page_order: Rx buffer page order + * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR + * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ) + * @sw_crypto: 0 for hw, 1 for sw + * @max_xxx_size: for ucode uses + * @ct_kill_threshold: temperature threshold + * @wd_timeout: TX queues watchdog timeout + * @calib_init_cfg: setup initial calibrations for the hw + * @calib_rt_cfg: setup runtime calibrations for the hw + * @struct iwl_sensitivity_ranges: range of sensitivity values + */ +struct iwl_hw_params { + u8 max_txq_num; + u8 num_ampdu_queues; + u8 tx_chains_num; + u8 rx_chains_num; + u8 valid_tx_ant; + u8 valid_rx_ant; + u8 max_stations; + u8 ht40_channel; + bool shadow_reg_enable; + u16 beacon_time_tsf_bits; + u16 sku; + u32 rx_page_order; + u32 max_inst_size; + u32 max_data_size; + u32 ct_kill_threshold; /* value in hw-dependent units */ + u32 ct_kill_exit_threshold; /* value in hw-dependent units */ + /* for 1000, 6000 series and up */ + unsigned int wd_timeout; + + u32 calib_init_cfg; + u32 calib_rt_cfg; + const struct iwl_sensitivity_ranges *sens; +}; + +/** + * struct iwl_ht_agg - aggregation status while waiting for block-ack + * @txq_id: Tx queue used for Tx attempt + * @wait_for_ba: Expect block-ack before next Tx reply + * @rate_n_flags: Rate at which Tx was attempted + * + * If REPLY_TX indicates that aggregation was attempted, driver must wait + * for block ack (REPLY_COMPRESSED_BA). This struct stores tx reply info + * until block ack arrives. + */ +struct iwl_ht_agg { + u16 txq_id; + u16 wait_for_ba; + u32 rate_n_flags; +#define IWL_AGG_OFF 0 +#define IWL_AGG_ON 1 +#define IWL_EMPTYING_HW_QUEUE_ADDBA 2 +#define IWL_EMPTYING_HW_QUEUE_DELBA 3 + u8 state; +}; + +struct iwl_tid_data { + u16 seq_number; /* agn only */ + u16 tfds_in_queue; + struct iwl_ht_agg agg; +}; + +/** + * struct iwl_shared - shared fields for all the layers of the driver + * + * @dbg_level_dev: dbg level set per device. Prevails on + * iwlagn_mod_params.debug_level if set (!= 0) + * @ucode_owner: IWL_OWNERSHIP_* + * @cmd_queue: command queue number + * @status: STATUS_* + * @valid_contexts: microcode/device supports multiple contexts + * @bus: pointer to the bus layer data + * @priv: pointer to the upper layer data + * @hw_params: see struct iwl_hw_params + * @workqueue: the workqueue used by all the layers of the driver + * @lock: protect general shared data + * @sta_lock: protects the station table. + * If lock and sta_lock are needed, lock must be acquired first. + * @mutex: + */ +struct iwl_shared { +#ifdef CONFIG_IWLWIFI_DEBUG + u32 dbg_level_dev; +#endif /* CONFIG_IWLWIFI_DEBUG */ + +#define IWL_OWNERSHIP_DRIVER 0 +#define IWL_OWNERSHIP_TM 1 + u8 ucode_owner; + u8 cmd_queue; + unsigned long status; + bool wowlan; + u8 valid_contexts; + + struct iwl_bus *bus; + struct iwl_priv *priv; + struct iwl_trans *trans; + struct iwl_hw_params hw_params; + + struct workqueue_struct *workqueue; + spinlock_t lock; + spinlock_t sta_lock; + struct mutex mutex; + + /*these 2 shouldn't really be here, but they are needed for + * iwl_queue_stop, which is called from the upper layer too + */ + u8 mac80211_registered; + struct ieee80211_hw *hw; + + struct iwl_tid_data tid_data[IWLAGN_STATION_COUNT][IWL_MAX_TID_COUNT]; + + wait_queue_head_t wait_command_queue; +}; + +/*Whatever _m is (iwl_trans, iwl_priv, iwl_bus, these macros will work */ +#define priv(_m) ((_m)->shrd->priv) +#define bus(_m) ((_m)->shrd->bus) +#define trans(_m) ((_m)->shrd->trans) +#define hw_params(_m) ((_m)->shrd->hw_params) + +#ifdef CONFIG_IWLWIFI_DEBUG +/* + * iwl_get_debug_level: Return active debug level for device + * + * Using sysfs it is possible to set per device debug level. This debug + * level will be used if set, otherwise the global debug level which can be + * set via module parameter is used. + */ +static inline u32 iwl_get_debug_level(struct iwl_shared *shrd) +{ + if (shrd->dbg_level_dev) + return shrd->dbg_level_dev; + else + return iwlagn_mod_params.debug_level; +} +#else +static inline u32 iwl_get_debug_level(struct iwl_shared *shrd) +{ + return iwlagn_mod_params.debug_level; +} +#endif + +static inline void iwl_free_pages(struct iwl_shared *shrd, unsigned long page) +{ + free_pages(page, shrd->hw_params.rx_page_order); +} + +/** + * iwl_queue_inc_wrap - increment queue index, wrap back to beginning + * @index -- current index + * @n_bd -- total number of entries in queue (must be power of 2) + */ +static inline int iwl_queue_inc_wrap(int index, int n_bd) +{ + return ++index & (n_bd - 1); +} + +/** + * iwl_queue_dec_wrap - decrement queue index, wrap back to end + * @index -- current index + * @n_bd -- total number of entries in queue (must be power of 2) + */ +static inline int iwl_queue_dec_wrap(int index, int n_bd) +{ + return --index & (n_bd - 1); +} + +struct iwl_rx_mem_buffer { + dma_addr_t page_dma; + struct page *page; + struct list_head list; +}; + +#define rxb_addr(r) page_address(r->page) + +/* + * mac80211 queues, ACs, hardware queues, FIFOs. + * + * Cf. http://wireless.kernel.org/en/developers/Documentation/mac80211/queues + * + * Mac80211 uses the following numbers, which we get as from it + * by way of skb_get_queue_mapping(skb): + * + * VO 0 + * VI 1 + * BE 2 + * BK 3 + * + * + * Regular (not A-MPDU) frames are put into hardware queues corresponding + * to the FIFOs, see comments in iwl-prph.h. Aggregated frames get their + * own queue per aggregation session (RA/TID combination), such queues are + * set up to map into FIFOs too, for which we need an AC->FIFO mapping. In + * order to map frames to the right queue, we also need an AC->hw queue + * mapping. This is implemented here. + * + * Due to the way hw queues are set up (by the hw specific modules like + * iwl-4965.c, iwl-5000.c etc.), the AC->hw queue mapping is the identity + * mapping. + */ + +static const u8 tid_to_ac[] = { + IEEE80211_AC_BE, + IEEE80211_AC_BK, + IEEE80211_AC_BK, + IEEE80211_AC_BE, + IEEE80211_AC_VI, + IEEE80211_AC_VI, + IEEE80211_AC_VO, + IEEE80211_AC_VO +}; + +static inline int get_ac_from_tid(u16 tid) +{ + if (likely(tid < ARRAY_SIZE(tid_to_ac))) + return tid_to_ac[tid]; + + /* no support for TIDs 8-15 yet */ + return -EINVAL; +} + +enum iwl_rxon_context_id { + IWL_RXON_CTX_BSS, + IWL_RXON_CTX_PAN, + + NUM_IWL_RXON_CTX +}; + +#ifdef CONFIG_PM +int iwl_suspend(struct iwl_priv *priv); +int iwl_resume(struct iwl_priv *priv); +#endif /* !CONFIG_PM */ + +int iwl_probe(struct iwl_bus *bus, const struct iwl_trans_ops *trans_ops, + struct iwl_cfg *cfg); +void __devexit iwl_remove(struct iwl_priv * priv); + +void iwl_rx_dispatch(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb); +int iwlagn_hw_valid_rtc_data_addr(u32 addr); +void iwl_start_tx_ba_trans_ready(struct iwl_priv *priv, + enum iwl_rxon_context_id ctx, + u8 sta_id, u8 tid); +void iwl_stop_tx_ba_trans_ready(struct iwl_priv *priv, + enum iwl_rxon_context_id ctx, + u8 sta_id, u8 tid); +void iwl_set_hw_rfkill_state(struct iwl_priv *priv, bool state); +void iwl_nic_config(struct iwl_priv *priv); +void iwl_apm_stop(struct iwl_priv *priv); +int iwl_apm_init(struct iwl_priv *priv); +void iwlagn_fw_error(struct iwl_priv *priv, bool ondemand); +const char *get_cmd_string(u8 cmd); +bool iwl_check_for_ct_kill(struct iwl_priv *priv); + +#ifdef CONFIG_IWLWIFI_DEBUGFS +void iwl_reset_traffic_log(struct iwl_priv *priv); +#endif /* CONFIG_IWLWIFI_DEBUGFS */ + +#ifdef CONFIG_IWLWIFI_DEBUG +void iwl_print_rx_config_cmd(struct iwl_priv *priv, u8 ctxid); +#else +static inline void iwl_print_rx_config_cmd(struct iwl_priv *priv, u8 ctxid) +{ +} +#endif + +#define IWL_CMD(x) case x: return #x +#define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo)))) + +#define IWL_TRAFFIC_ENTRIES (256) +#define IWL_TRAFFIC_ENTRY_SIZE (64) + +/***************************************************** +* DRIVER STATUS FUNCTIONS +******************************************************/ +#define STATUS_HCMD_ACTIVE 0 /* host command in progress */ +/* 1 is unused (used to be STATUS_HCMD_SYNC_ACTIVE) */ +#define STATUS_INT_ENABLED 2 +#define STATUS_RF_KILL_HW 3 +#define STATUS_CT_KILL 4 +#define STATUS_INIT 5 +#define STATUS_ALIVE 6 +#define STATUS_READY 7 +#define STATUS_TEMPERATURE 8 +#define STATUS_GEO_CONFIGURED 9 +#define STATUS_EXIT_PENDING 10 +#define STATUS_STATISTICS 12 +#define STATUS_SCANNING 13 +#define STATUS_SCAN_ABORTING 14 +#define STATUS_SCAN_HW 15 +#define STATUS_POWER_PMI 16 +#define STATUS_FW_ERROR 17 +#define STATUS_DEVICE_ENABLED 18 +#define STATUS_CHANNEL_SWITCH_PENDING 19 + +static inline int iwl_is_ready(struct iwl_shared *shrd) +{ + /* The adapter is 'ready' if READY and GEO_CONFIGURED bits are + * set but EXIT_PENDING is not */ + return test_bit(STATUS_READY, &shrd->status) && + test_bit(STATUS_GEO_CONFIGURED, &shrd->status) && + !test_bit(STATUS_EXIT_PENDING, &shrd->status); +} + +static inline int iwl_is_alive(struct iwl_shared *shrd) +{ + return test_bit(STATUS_ALIVE, &shrd->status); +} + +static inline int iwl_is_init(struct iwl_shared *shrd) +{ + return test_bit(STATUS_INIT, &shrd->status); +} + +static inline int iwl_is_rfkill_hw(struct iwl_shared *shrd) +{ + return test_bit(STATUS_RF_KILL_HW, &shrd->status); +} + +static inline int iwl_is_rfkill(struct iwl_shared *shrd) +{ + return iwl_is_rfkill_hw(shrd); +} + +static inline int iwl_is_ctkill(struct iwl_shared *shrd) +{ + return test_bit(STATUS_CT_KILL, &shrd->status); +} + +static inline int iwl_is_ready_rf(struct iwl_shared *shrd) +{ + if (iwl_is_rfkill(shrd)) + return 0; + + return iwl_is_ready(shrd); +} + +#endif /* #__iwl_shared_h__ */ |