diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/mvm')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/mvm/d3.c | 15 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/mvm/debugfs.c | 6 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h | 1 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/mvm/mac80211.c | 65 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/mvm/mvm.h | 1 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/mvm/scan.c | 19 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/mvm/sta.c | 34 |
7 files changed, 95 insertions, 46 deletions
diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c index 7e5e5c2f9f87..83da884cf303 100644 --- a/drivers/net/wireless/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -134,7 +134,7 @@ struct wowlan_key_data { struct iwl_wowlan_rsc_tsc_params_cmd *rsc_tsc; struct iwl_wowlan_tkip_params_cmd *tkip; bool error, use_rsc_tsc, use_tkip; - int gtk_key_idx; + int wep_key_idx; }; static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw, @@ -188,8 +188,8 @@ static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw, wkc.wep_key.key_offset = 0; } else { /* others start at 1 */ - data->gtk_key_idx++; - wkc.wep_key.key_offset = data->gtk_key_idx; + data->wep_key_idx++; + wkc.wep_key.key_offset = data->wep_key_idx; } ret = iwl_mvm_send_cmd_pdu(mvm, WEP_KEY, CMD_SYNC, @@ -316,8 +316,13 @@ static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw, mvm->ptk_ivlen = key->iv_len; mvm->ptk_icvlen = key->icv_len; } else { - data->gtk_key_idx++; - key->hw_key_idx = data->gtk_key_idx; + /* + * firmware only supports TSC/RSC for a single key, + * so if there are multiple keep overwriting them + * with new ones -- this relies on mac80211 doing + * list_add_tail(). + */ + key->hw_key_idx = 1; mvm->gtk_ivlen = key->iv_len; mvm->gtk_icvlen = key->icv_len; } diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c index e56ed2a84888..c24a744910ac 100644 --- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c +++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c @@ -988,7 +988,11 @@ void iwl_mvm_vif_dbgfs_register(struct iwl_mvm *mvm, struct ieee80211_vif *vif) struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); char buf[100]; - if (!dbgfs_dir) + /* + * Check if debugfs directory already exist before creating it. + * This may happen when, for example, resetting hw or suspend-resume + */ + if (!dbgfs_dir || mvmvif->dbgfs_dir) return; mvmvif->dbgfs_dir = debugfs_create_dir("iwlmvm", dbgfs_dir); diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h index b60d14151721..365095a0c3b3 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h @@ -69,7 +69,6 @@ /* Scan Commands, Responses, Notifications */ /* Masks for iwl_scan_channel.type flags */ -#define SCAN_CHANNEL_TYPE_PASSIVE 0 #define SCAN_CHANNEL_TYPE_ACTIVE BIT(0) #define SCAN_CHANNEL_NARROW_BAND BIT(22) diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index e08683b20531..f19baf0dea6b 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -257,7 +257,11 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) if (ret) return ret; - return ieee80211_register_hw(mvm->hw); + ret = ieee80211_register_hw(mvm->hw); + if (ret) + iwl_mvm_leds_exit(mvm); + + return ret; } static void iwl_mvm_mac_tx(struct ieee80211_hw *hw, @@ -385,6 +389,7 @@ static void iwl_mvm_restart_cleanup(struct iwl_mvm *mvm) ieee80211_wake_queues(mvm->hw); mvm->vif_count = 0; + mvm->rx_ba_sessions = 0; } static int iwl_mvm_mac_start(struct ieee80211_hw *hw) @@ -507,6 +512,27 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw, goto out_unlock; /* + * TODO: remove this temporary code. + * Currently MVM FW supports power management only on single MAC. + * If new interface added, disable PM on existing interface. + * P2P device is a special case, since it is handled by FW similary to + * scan. If P2P deviced is added, PM remains enabled on existing + * interface. + * Note: the method below does not count the new interface being added + * at this moment. + */ + if (vif->type != NL80211_IFTYPE_P2P_DEVICE) + mvm->vif_count++; + if (mvm->vif_count > 1) { + IWL_DEBUG_MAC80211(mvm, + "Disable power on existing interfaces\n"); + ieee80211_iterate_active_interfaces_atomic( + mvm->hw, + IEEE80211_IFACE_ITER_NORMAL, + iwl_mvm_pm_disable_iterator, mvm); + } + + /* * The AP binding flow can be done only after the beacon * template is configured (which happens only in the mac80211 * start_ap() flow), and adding the broadcast station can happen @@ -529,27 +555,6 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw, goto out_unlock; } - /* - * TODO: remove this temporary code. - * Currently MVM FW supports power management only on single MAC. - * If new interface added, disable PM on existing interface. - * P2P device is a special case, since it is handled by FW similary to - * scan. If P2P deviced is added, PM remains enabled on existing - * interface. - * Note: the method below does not count the new interface being added - * at this moment. - */ - if (vif->type != NL80211_IFTYPE_P2P_DEVICE) - mvm->vif_count++; - if (mvm->vif_count > 1) { - IWL_DEBUG_MAC80211(mvm, - "Disable power on existing interfaces\n"); - ieee80211_iterate_active_interfaces_atomic( - mvm->hw, - IEEE80211_IFACE_ITER_NORMAL, - iwl_mvm_pm_disable_iterator, mvm); - } - ret = iwl_mvm_mac_ctxt_add(mvm, vif); if (ret) goto out_release; @@ -1006,6 +1011,21 @@ static int iwl_mvm_mac_sta_state(struct ieee80211_hw *hw, mutex_lock(&mvm->mutex); if (old_state == IEEE80211_STA_NOTEXIST && new_state == IEEE80211_STA_NONE) { + /* + * Firmware bug - it'll crash if the beacon interval is less + * than 16. We can't avoid connecting at all, so refuse the + * station state change, this will cause mac80211 to abandon + * attempts to connect to this AP, and eventually wpa_s will + * blacklist the AP... + */ + if (vif->type == NL80211_IFTYPE_STATION && + vif->bss_conf.beacon_int < 16) { + IWL_ERR(mvm, + "AP %pM beacon interval is %d, refusing due to firmware bug!\n", + sta->addr, vif->bss_conf.beacon_int); + ret = -EINVAL; + goto out_unlock; + } ret = iwl_mvm_add_sta(mvm, vif, sta); } else if (old_state == IEEE80211_STA_NONE && new_state == IEEE80211_STA_AUTH) { @@ -1038,6 +1058,7 @@ static int iwl_mvm_mac_sta_state(struct ieee80211_hw *hw, } else { ret = -EIO; } + out_unlock: mutex_unlock(&mvm->mutex); return ret; diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index d40d7db185d6..420e82d379d9 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -419,6 +419,7 @@ struct iwl_mvm { struct work_struct sta_drained_wk; unsigned long sta_drained[BITS_TO_LONGS(IWL_MVM_STATION_COUNT)]; atomic_t pending_frames[IWL_MVM_STATION_COUNT]; + u8 rx_ba_sessions; /* configured by mac80211 */ u32 rts_threshold; diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 2157b0f8ced5..acdff6b67e04 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -137,8 +137,8 @@ static void iwl_mvm_scan_fill_ssids(struct iwl_scan_cmd *cmd, { int fw_idx, req_idx; - fw_idx = 0; - for (req_idx = req->n_ssids - 1; req_idx > 0; req_idx--) { + for (req_idx = req->n_ssids - 1, fw_idx = 0; req_idx > 0; + req_idx--, fw_idx++) { cmd->direct_scan[fw_idx].id = WLAN_EID_SSID; cmd->direct_scan[fw_idx].len = req->ssids[req_idx].ssid_len; memcpy(cmd->direct_scan[fw_idx].ssid, @@ -153,7 +153,9 @@ static void iwl_mvm_scan_fill_ssids(struct iwl_scan_cmd *cmd, * just to notify that this scan is active and not passive. * In order to notify the FW of the number of SSIDs we wish to scan (including * the zero-length one), we need to set the corresponding bits in chan->type, - * one for each SSID, and set the active bit (first). + * one for each SSID, and set the active bit (first). The first SSID is already + * included in the probe template, so we need to set only req->n_ssids - 1 bits + * in addition to the first bit. */ static u16 iwl_mvm_get_active_dwell(enum ieee80211_band band, int n_ssids) { @@ -176,19 +178,12 @@ static void iwl_mvm_scan_fill_channels(struct iwl_scan_cmd *cmd, struct iwl_scan_channel *chan = (struct iwl_scan_channel *) (cmd->data + le16_to_cpu(cmd->tx_cmd.len)); int i; - __le32 chan_type_value; - - if (req->n_ssids > 0) - chan_type_value = cpu_to_le32(BIT(req->n_ssids + 1) - 1); - else - chan_type_value = SCAN_CHANNEL_TYPE_PASSIVE; for (i = 0; i < cmd->channel_count; i++) { chan->channel = cpu_to_le16(req->channels[i]->hw_value); + chan->type = cpu_to_le32(BIT(req->n_ssids) - 1); if (req->channels[i]->flags & IEEE80211_CHAN_PASSIVE_SCAN) - chan->type = SCAN_CHANNEL_TYPE_PASSIVE; - else - chan->type = chan_type_value; + chan->type &= cpu_to_le32(~SCAN_CHANNEL_TYPE_ACTIVE); chan->active_dwell = cpu_to_le16(active_dwell); chan->passive_dwell = cpu_to_le16(passive_dwell); chan->iteration_count = cpu_to_le16(1); diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index 62fe5209093b..563f559b902d 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -608,6 +608,8 @@ int iwl_mvm_rm_bcast_sta(struct iwl_mvm *mvm, struct iwl_mvm_int_sta *bsta) return ret; } +#define IWL_MAX_RX_BA_SESSIONS 16 + int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, int tid, u16 ssn, bool start) { @@ -618,11 +620,20 @@ int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, lockdep_assert_held(&mvm->mutex); + if (start && mvm->rx_ba_sessions >= IWL_MAX_RX_BA_SESSIONS) { + IWL_WARN(mvm, "Not enough RX BA SESSIONS\n"); + return -ENOSPC; + } + cmd.mac_id_n_color = cpu_to_le32(mvm_sta->mac_id_n_color); cmd.sta_id = mvm_sta->sta_id; cmd.add_modify = STA_MODE_MODIFY; - cmd.add_immediate_ba_tid = (u8) tid; - cmd.add_immediate_ba_ssn = cpu_to_le16(ssn); + if (start) { + cmd.add_immediate_ba_tid = (u8) tid; + cmd.add_immediate_ba_ssn = cpu_to_le16(ssn); + } else { + cmd.remove_immediate_ba_tid = (u8) tid; + } cmd.modify_mask = start ? STA_MODIFY_ADD_BA_TID : STA_MODIFY_REMOVE_BA_TID; @@ -648,6 +659,14 @@ int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, break; } + if (!ret) { + if (start) + mvm->rx_ba_sessions++; + else if (mvm->rx_ba_sessions > 0) + /* check that restart flow didn't zero the counter */ + mvm->rx_ba_sessions--; + } + return ret; } @@ -896,6 +915,7 @@ int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct iwl_mvm_sta *mvmsta = (void *)sta->drv_priv; struct iwl_mvm_tid_data *tid_data = &mvmsta->tid_data[tid]; u16 txq_id; + enum iwl_mvm_agg_state old_state; /* * First set the agg state to OFF to avoid calling @@ -905,13 +925,17 @@ int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm *mvm, struct ieee80211_vif *vif, txq_id = tid_data->txq_id; IWL_DEBUG_TX_QUEUES(mvm, "Flush AGG: sta %d tid %d q %d state %d\n", mvmsta->sta_id, tid, txq_id, tid_data->state); + old_state = tid_data->state; tid_data->state = IWL_AGG_OFF; spin_unlock_bh(&mvmsta->lock); - if (iwl_mvm_flush_tx_path(mvm, BIT(txq_id), true)) - IWL_ERR(mvm, "Couldn't flush the AGG queue\n"); + if (old_state >= IWL_AGG_ON) { + if (iwl_mvm_flush_tx_path(mvm, BIT(txq_id), true)) + IWL_ERR(mvm, "Couldn't flush the AGG queue\n"); + + iwl_trans_txq_disable(mvm->trans, tid_data->txq_id); + } - iwl_trans_txq_disable(mvm->trans, tid_data->txq_id); mvm->queue_to_mac80211[tid_data->txq_id] = IWL_INVALID_MAC80211_QUEUE; |