1 files changed, 226 insertions, 114 deletions

diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h
index 8cc5468654b4..6d51dfdd8251 100644
--- a/drivers/net/wireless/mwifiex/sdio.h
+++ b/drivers/net/wireless/mwifiex/sdio.h
@@ -32,30 +32,37 @@
 #define SD8786_DEFAULT_FW_NAME "mrvl/sd8786_uapsta.bin"
 #define SD8787_DEFAULT_FW_NAME "mrvl/sd8787_uapsta.bin"
 #define SD8797_DEFAULT_FW_NAME "mrvl/sd8797_uapsta.bin"
+#define SD8897_DEFAULT_FW_NAME "mrvl/sd8897_uapsta.bin"
 
 #define BLOCK_MODE	1
 #define BYTE_MODE	0
 
 #define REG_PORT			0
-#define RD_BITMAP_L			0x04
-#define RD_BITMAP_U			0x05
-#define WR_BITMAP_L			0x06
-#define WR_BITMAP_U			0x07
-#define RD_LEN_P0_L			0x08
-#define RD_LEN_P0_U			0x09
 
 #define MWIFIEX_SDIO_IO_PORT_MASK		0xfffff
 
 #define MWIFIEX_SDIO_BYTE_MODE_MASK	0x80000000
 
+#define SDIO_MPA_ADDR_BASE		0x1000
 #define CTRL_PORT			0
 #define CTRL_PORT_MASK			0x0001
-#define DATA_PORT_MASK			0xfffe
 
-#define MAX_MP_REGS			64
-#define MAX_PORT			16
-
-#define SDIO_MP_AGGR_DEF_PKT_LIMIT	8
+#define CMD_PORT_UPLD_INT_MASK		(0x1U<<6)
+#define CMD_PORT_DNLD_INT_MASK		(0x1U<<7)
+#define HOST_TERM_CMD53			(0x1U << 2)
+#define REG_PORT			0
+#define MEM_PORT			0x10000
+#define CMD_RD_LEN_0			0xB4
+#define CMD_RD_LEN_1			0xB5
+#define CARD_CONFIG_2_1_REG             0xCD
+#define CMD53_NEW_MODE			(0x1U << 0)
+#define CMD_CONFIG_0			0xB8
+#define CMD_PORT_RD_LEN_EN		(0x1U << 2)
+#define CMD_CONFIG_1			0xB9
+#define CMD_PORT_AUTO_EN		(0x1U << 0)
+#define CMD_PORT_SLCT			0x8000
+#define UP_LD_CMD_PORT_HOST_INT_STATUS	(0x40U)
+#define DN_LD_CMD_PORT_HOST_INT_STATUS	(0x80U)
 
 #define SDIO_MP_TX_AGGR_DEF_BUF_SIZE        (8192)	/* 8K */
 
@@ -75,14 +82,8 @@
 
 /* Host Control Registers : Configuration */
 #define CONFIGURATION_REG		0x00
-/* Host Control Registers : Host without Command 53 finish host*/
-#define HOST_TO_CARD_EVENT       (0x1U << 3)
-/* Host Control Registers : Host without Command 53 finish host */
-#define HOST_WO_CMD53_FINISH_HOST	(0x1U << 2)
 /* Host Control Registers : Host power up */
 #define HOST_POWER_UP			(0x1U << 1)
-/* Host Control Registers : Host power down */
-#define HOST_POWER_DOWN			(0x1U << 0)
 
 /* Host Control Registers : Host interrupt mask */
 #define HOST_INT_MASK_REG		0x02
@@ -90,8 +91,7 @@
 #define UP_LD_HOST_INT_MASK		(0x1U)
 /* Host Control Registers : Download host interrupt mask */
 #define DN_LD_HOST_INT_MASK		(0x2U)
-/* Enable Host interrupt mask */
-#define HOST_INT_ENABLE	(UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK)
+
 /* Disable Host interrupt mask */
 #define	HOST_INT_DISABLE		0xff
 
@@ -104,74 +104,15 @@
 
 /* Host Control Registers : Host interrupt RSR */
 #define HOST_INT_RSR_REG		0x01
-/* Host Control Registers : Upload host interrupt RSR */
-#define UP_LD_HOST_INT_RSR		(0x1U)
-#define SDIO_INT_MASK			0x3F
 
 /* Host Control Registers : Host interrupt status */
 #define HOST_INT_STATUS_REG		0x28
-/* Host Control Registers : Upload CRC error */
-#define UP_LD_CRC_ERR			(0x1U << 2)
-/* Host Control Registers : Upload restart */
-#define UP_LD_RESTART                   (0x1U << 1)
-/* Host Control Registers : Download restart */
-#define DN_LD_RESTART                   (0x1U << 0)
-
-/* Card Control Registers : Card status register */
-#define CARD_STATUS_REG                 0x30
+
 /* Card Control Registers : Card I/O ready */
 #define CARD_IO_READY                   (0x1U << 3)
-/* Card Control Registers : CIS card ready */
-#define CIS_CARD_RDY                    (0x1U << 2)
-/* Card Control Registers : Upload card ready */
-#define UP_LD_CARD_RDY                  (0x1U << 1)
 /* Card Control Registers : Download card ready */
 #define DN_LD_CARD_RDY                  (0x1U << 0)
 
-/* Card Control Registers : Host interrupt mask register */
-#define HOST_INTERRUPT_MASK_REG         0x34
-/* Card Control Registers : Host power interrupt mask */
-#define HOST_POWER_INT_MASK             (0x1U << 3)
-/* Card Control Registers : Abort card interrupt mask */
-#define ABORT_CARD_INT_MASK             (0x1U << 2)
-/* Card Control Registers : Upload card interrupt mask */
-#define UP_LD_CARD_INT_MASK             (0x1U << 1)
-/* Card Control Registers : Download card interrupt mask */
-#define DN_LD_CARD_INT_MASK             (0x1U << 0)
-
-/* Card Control Registers : Card interrupt status register */
-#define CARD_INTERRUPT_STATUS_REG       0x38
-/* Card Control Registers : Power up interrupt */
-#define POWER_UP_INT                    (0x1U << 4)
-/* Card Control Registers : Power down interrupt */
-#define POWER_DOWN_INT                  (0x1U << 3)
-
-/* Card Control Registers : Card interrupt RSR register */
-#define CARD_INTERRUPT_RSR_REG          0x3c
-/* Card Control Registers : Power up RSR */
-#define POWER_UP_RSR                    (0x1U << 4)
-/* Card Control Registers : Power down RSR */
-#define POWER_DOWN_RSR                  (0x1U << 3)
-
-/* Card Control Registers : Miscellaneous Configuration Register */
-#define CARD_MISC_CFG_REG               0x6C
-
-/* Host F1 read base 0 */
-#define HOST_F1_RD_BASE_0		0x0040
-/* Host F1 read base 1 */
-#define HOST_F1_RD_BASE_1		0x0041
-/* Host F1 card ready */
-#define HOST_F1_CARD_RDY		0x0020
-
-/* Firmware status 0 register */
-#define CARD_FW_STATUS0_REG		0x60
-/* Firmware status 1 register */
-#define CARD_FW_STATUS1_REG		0x61
-/* Rx length register */
-#define CARD_RX_LEN_REG			0x62
-/* Rx unit register */
-#define CARD_RX_UNIT_REG		0x63
-
 /* Max retry number of CMD53 write */
 #define MAX_WRITE_IOMEM_RETRY		2
 
@@ -192,7 +133,8 @@
 	if (a->mpa_tx.start_port <= port)				\
 		a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt));		\
 	else								\
-		a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt+1+(MAX_PORT -	\
+		a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt+1+		\
+						(a->max_ports -	\
 						a->mp_end_port)));	\
 	a->mpa_tx.pkt_cnt++;						\
 } while (0)
@@ -201,12 +143,6 @@
 #define MP_TX_AGGR_PKT_LIMIT_REACHED(a)					\
 			(a->mpa_tx.pkt_cnt == a->mpa_tx.pkt_aggr_limit)
 
-/* SDIO Tx aggregation port limit ? */
-#define MP_TX_AGGR_PORT_LIMIT_REACHED(a) ((a->curr_wr_port <		\
-			a->mpa_tx.start_port) && (((MAX_PORT -		\
-			a->mpa_tx.start_port) + a->curr_wr_port) >=	\
-				SDIO_MP_AGGR_DEF_PKT_LIMIT))
-
 /* Reset SDIO Tx aggregation buffer parameters */
 #define MP_TX_AGGR_BUF_RESET(a) do {					\
 	a->mpa_tx.pkt_cnt = 0;						\
@@ -219,12 +155,6 @@
 #define MP_RX_AGGR_PKT_LIMIT_REACHED(a)					\
 			(a->mpa_rx.pkt_cnt == a->mpa_rx.pkt_aggr_limit)
 
-/* SDIO Tx aggregation port limit ? */
-#define MP_RX_AGGR_PORT_LIMIT_REACHED(a) ((a->curr_rd_port <		\
-			a->mpa_rx.start_port) && (((MAX_PORT -		\
-			a->mpa_rx.start_port) + a->curr_rd_port) >=	\
-			SDIO_MP_AGGR_DEF_PKT_LIMIT))
-
 /* SDIO Rx aggregation in progress ? */
 #define MP_RX_AGGR_IN_PROGRESS(a) (a->mpa_rx.pkt_cnt > 0)
 
@@ -232,20 +162,6 @@
 #define MP_RX_AGGR_BUF_HAS_ROOM(a, rx_len)				\
 			((a->mpa_rx.buf_len+rx_len) <= a->mpa_rx.buf_size)
 
-/* Prepare to copy current packet from card to SDIO Rx aggregation buffer */
-#define MP_RX_AGGR_SETUP(a, skb, port) do {				\
-	a->mpa_rx.buf_len += skb->len;					\
-	if (!a->mpa_rx.pkt_cnt)						\
-		a->mpa_rx.start_port = port;				\
-	if (a->mpa_rx.start_port <= port)				\
-		a->mpa_rx.ports |= (1<<(a->mpa_rx.pkt_cnt));		\
-	else								\
-		a->mpa_rx.ports |= (1<<(a->mpa_rx.pkt_cnt+1));		\
-	a->mpa_rx.skb_arr[a->mpa_rx.pkt_cnt] = skb;			\
-	a->mpa_rx.len_arr[a->mpa_rx.pkt_cnt] = skb->len;		\
-	a->mpa_rx.pkt_cnt++;						\
-} while (0)
-
 /* Reset SDIO Rx aggregation buffer parameters */
 #define MP_RX_AGGR_BUF_RESET(a) do {					\
 	a->mpa_rx.pkt_cnt = 0;						\
@@ -254,14 +170,13 @@
 	a->mpa_rx.start_port = 0;					\
 } while (0)
 
-
 /* data structure for SDIO MPA TX */
 struct mwifiex_sdio_mpa_tx {
 	/* multiport tx aggregation buffer pointer */
 	u8 *buf;
 	u32 buf_len;
 	u32 pkt_cnt;
-	u16 ports;
+	u32 ports;
 	u16 start_port;
 	u8 enabled;
 	u32 buf_size;
@@ -272,11 +187,11 @@ struct mwifiex_sdio_mpa_rx {
 	u8 *buf;
 	u32 buf_len;
 	u32 pkt_cnt;
-	u16 ports;
+	u32 ports;
 	u16 start_port;
 
-	struct sk_buff *skb_arr[SDIO_MP_AGGR_DEF_PKT_LIMIT];
-	u32 len_arr[SDIO_MP_AGGR_DEF_PKT_LIMIT];
+	struct sk_buff **skb_arr;
+	u32 *len_arr;
 
 	u8 enabled;
 	u32 buf_size;
@@ -286,15 +201,47 @@ struct mwifiex_sdio_mpa_rx {
 int mwifiex_bus_register(void);
 void mwifiex_bus_unregister(void);
 
+struct mwifiex_sdio_card_reg {
+	u8 start_rd_port;
+	u8 start_wr_port;
+	u8 base_0_reg;
+	u8 base_1_reg;
+	u8 poll_reg;
+	u8 host_int_enable;
+	u8 status_reg_0;
+	u8 status_reg_1;
+	u8 sdio_int_mask;
+	u32 data_port_mask;
+	u8 max_mp_regs;
+	u8 rd_bitmap_l;
+	u8 rd_bitmap_u;
+	u8 rd_bitmap_1l;
+	u8 rd_bitmap_1u;
+	u8 wr_bitmap_l;
+	u8 wr_bitmap_u;
+	u8 wr_bitmap_1l;
+	u8 wr_bitmap_1u;
+	u8 rd_len_p0_l;
+	u8 rd_len_p0_u;
+	u8 card_misc_cfg_reg;
+};
+
 struct sdio_mmc_card {
 	struct sdio_func *func;
 	struct mwifiex_adapter *adapter;
 
-	u16 mp_rd_bitmap;
-	u16 mp_wr_bitmap;
+	const char *firmware;
+	const struct mwifiex_sdio_card_reg *reg;
+	u8 max_ports;
+	u8 mp_agg_pkt_limit;
+	bool supports_sdio_new_mode;
+	bool has_control_mask;
+
+	u32 mp_rd_bitmap;
+	u32 mp_wr_bitmap;
 
 	u16 mp_end_port;
-	u16 mp_data_port_mask;
+	u32 mp_data_port_mask;
 
 	u8 curr_rd_port;
 	u8 curr_wr_port;
@@ -305,6 +252,98 @@ struct sdio_mmc_card {
 	struct mwifiex_sdio_mpa_rx mpa_rx;
 };
 
+struct mwifiex_sdio_device {
+	const char *firmware;
+	const struct mwifiex_sdio_card_reg *reg;
+	u8 max_ports;
+	u8 mp_agg_pkt_limit;
+	bool supports_sdio_new_mode;
+	bool has_control_mask;
+};
+
+static const struct mwifiex_sdio_card_reg mwifiex_reg_sd87xx = {
+	.start_rd_port = 1,
+	.start_wr_port = 1,
+	.base_0_reg = 0x0040,
+	.base_1_reg = 0x0041,
+	.poll_reg = 0x30,
+	.host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK,
+	.status_reg_0 = 0x60,
+	.status_reg_1 = 0x61,
+	.sdio_int_mask = 0x3f,
+	.data_port_mask = 0x0000fffe,
+	.max_mp_regs = 64,
+	.rd_bitmap_l = 0x04,
+	.rd_bitmap_u = 0x05,
+	.wr_bitmap_l = 0x06,
+	.wr_bitmap_u = 0x07,
+	.rd_len_p0_l = 0x08,
+	.rd_len_p0_u = 0x09,
+	.card_misc_cfg_reg = 0x6c,
+};
+
+static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8897 = {
+	.start_rd_port = 0,
+	.start_wr_port = 0,
+	.base_0_reg = 0x60,
+	.base_1_reg = 0x61,
+	.poll_reg = 0x50,
+	.host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK |
+			CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK,
+	.status_reg_0 = 0xc0,
+	.status_reg_1 = 0xc1,
+	.sdio_int_mask = 0xff,
+	.data_port_mask = 0xffffffff,
+	.max_mp_regs = 184,
+	.rd_bitmap_l = 0x04,
+	.rd_bitmap_u = 0x05,
+	.rd_bitmap_1l = 0x06,
+	.rd_bitmap_1u = 0x07,
+	.wr_bitmap_l = 0x08,
+	.wr_bitmap_u = 0x09,
+	.wr_bitmap_1l = 0x0a,
+	.wr_bitmap_1u = 0x0b,
+	.rd_len_p0_l = 0x0c,
+	.rd_len_p0_u = 0x0d,
+	.card_misc_cfg_reg = 0xcc,
+};
+
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8786 = {
+	.firmware = SD8786_DEFAULT_FW_NAME,
+	.reg = &mwifiex_reg_sd87xx,
+	.max_ports = 16,
+	.mp_agg_pkt_limit = 8,
+	.supports_sdio_new_mode = false,
+	.has_control_mask = true,
+};
+
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8787 = {
+	.firmware = SD8787_DEFAULT_FW_NAME,
+	.reg = &mwifiex_reg_sd87xx,
+	.max_ports = 16,
+	.mp_agg_pkt_limit = 8,
+	.supports_sdio_new_mode = false,
+	.has_control_mask = true,
+};
+
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8797 = {
+	.firmware = SD8797_DEFAULT_FW_NAME,
+	.reg = &mwifiex_reg_sd87xx,
+	.max_ports = 16,
+	.mp_agg_pkt_limit = 8,
+	.supports_sdio_new_mode = false,
+	.has_control_mask = true,
+};
+
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8897 = {
+	.firmware = SD8897_DEFAULT_FW_NAME,
+	.reg = &mwifiex_reg_sd8897,
+	.max_ports = 32,
+	.mp_agg_pkt_limit = 16,
+	.supports_sdio_new_mode = true,
+	.has_control_mask = false,
+};
+
 /*
  * .cmdrsp_complete handler
  */
@@ -325,4 +364,77 @@ static inline int mwifiex_sdio_event_complete(struct mwifiex_adapter *adapter,
 	return 0;
 }
 
+static inline bool
+mp_rx_aggr_port_limit_reached(struct sdio_mmc_card *card)
+{
+	u8 tmp;
+
+	if (card->curr_rd_port < card->mpa_rx.start_port) {
+		if (card->supports_sdio_new_mode)
+			tmp = card->mp_end_port >> 1;
+		else
+			tmp = card->mp_agg_pkt_limit;
+
+		if (((card->max_ports - card->mpa_rx.start_port) +
+		    card->curr_rd_port) >= tmp)
+			return true;
+	}
+
+	if (!card->supports_sdio_new_mode)
+		return false;
+
+	if ((card->curr_rd_port - card->mpa_rx.start_port) >=
+	    (card->mp_end_port >> 1))
+		return true;
+
+	return false;
+}
+
+static inline bool
+mp_tx_aggr_port_limit_reached(struct sdio_mmc_card *card)
+{
+	u16 tmp;
+
+	if (card->curr_wr_port < card->mpa_tx.start_port) {
+		if (card->supports_sdio_new_mode)
+			tmp = card->mp_end_port >> 1;
+		else
+			tmp = card->mp_agg_pkt_limit;
+
+		if (((card->max_ports - card->mpa_tx.start_port) +
+		    card->curr_wr_port) >= tmp)
+			return true;
+	}
+
+	if (!card->supports_sdio_new_mode)
+		return false;
+
+	if ((card->curr_wr_port - card->mpa_tx.start_port) >=
+	    (card->mp_end_port >> 1))
+		return true;
+
+	return false;
+}
+
+/* Prepare to copy current packet from card to SDIO Rx aggregation buffer */
+static inline void mp_rx_aggr_setup(struct sdio_mmc_card *card,
+				    struct sk_buff *skb, u8 port)
+{
+	card->mpa_rx.buf_len += skb->len;
+
+	if (!card->mpa_rx.pkt_cnt)
+		card->mpa_rx.start_port = port;
+
+	if (card->supports_sdio_new_mode) {
+		card->mpa_rx.ports |= (1 << port);
+	} else {
+		if (card->mpa_rx.start_port <= port)
+			card->mpa_rx.ports |= 1 << (card->mpa_rx.pkt_cnt);
+		else
+			card->mpa_rx.ports |= 1 << (card->mpa_rx.pkt_cnt + 1);
+	}
+	card->mpa_rx.skb_arr[card->mpa_rx.pkt_cnt] = skb;
+	card->mpa_rx.len_arr[card->mpa_rx.pkt_cnt] = skb->len;
+	card->mpa_rx.pkt_cnt++;
+}
 #endif /* _MWIFIEX_SDIO_H */