aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/rsi/rsi_91x_sdio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/rsi/rsi_91x_sdio.c')
-rw-r--r--drivers/net/wireless/rsi/rsi_91x_sdio.c157
1 files changed, 123 insertions, 34 deletions
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
index e5ea99bb2dd8..8d3a4839b6ef 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -138,12 +138,15 @@ static int rsi_issue_sdiocommand(struct sdio_func *func,
static void rsi_handle_interrupt(struct sdio_func *function)
{
struct rsi_hw *adapter = sdio_get_drvdata(function);
+ struct rsi_91x_sdiodev *dev =
+ (struct rsi_91x_sdiodev *)adapter->rsi_dev;
if (adapter->priv->fsm_state == FSM_FW_NOT_LOADED)
return;
- sdio_release_host(function);
+
+ dev->sdio_irq_task = current;
rsi_interrupt_handler(adapter);
- sdio_claim_host(function);
+ dev->sdio_irq_task = NULL;
}
/**
@@ -219,26 +222,18 @@ static void rsi_reset_card(struct sdio_func *pfunction)
if (err)
rsi_dbg(ERR_ZONE, "%s: CMD0 failed : %d\n", __func__, err);
- if (!host->ocr_avail) {
- /* Issue CMD5, arg = 0 */
- err = rsi_issue_sdiocommand(pfunction,
- SD_IO_SEND_OP_COND,
- 0,
- (MMC_RSP_R4 | MMC_CMD_BCR),
- &resp);
- if (err)
- rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n",
- __func__, err);
- host->ocr_avail = resp;
- }
+ /* Issue CMD5, arg = 0 */
+ err = rsi_issue_sdiocommand(pfunction, SD_IO_SEND_OP_COND, 0,
+ (MMC_RSP_R4 | MMC_CMD_BCR), &resp);
+ if (err)
+ rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n", __func__, err);
+ card->ocr = resp;
/* Issue CMD5, arg = ocr. Wait till card is ready */
for (i = 0; i < 100; i++) {
- err = rsi_issue_sdiocommand(pfunction,
- SD_IO_SEND_OP_COND,
- host->ocr_avail,
- (MMC_RSP_R4 | MMC_CMD_BCR),
- &resp);
+ err = rsi_issue_sdiocommand(pfunction, SD_IO_SEND_OP_COND,
+ card->ocr,
+ (MMC_RSP_R4 | MMC_CMD_BCR), &resp);
if (err) {
rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n",
__func__, err);
@@ -415,14 +410,16 @@ int rsi_sdio_read_register(struct rsi_hw *adapter,
u8 fun_num = 0;
int status;
- sdio_claim_host(dev->pfunction);
+ if (likely(dev->sdio_irq_task != current))
+ sdio_claim_host(dev->pfunction);
if (fun_num == 0)
*data = sdio_f0_readb(dev->pfunction, addr, &status);
else
*data = sdio_readb(dev->pfunction, addr, &status);
- sdio_release_host(dev->pfunction);
+ if (likely(dev->sdio_irq_task != current))
+ sdio_release_host(dev->pfunction);
return status;
}
@@ -446,14 +443,16 @@ int rsi_sdio_write_register(struct rsi_hw *adapter,
(struct rsi_91x_sdiodev *)adapter->rsi_dev;
int status = 0;
- sdio_claim_host(dev->pfunction);
+ if (likely(dev->sdio_irq_task != current))
+ sdio_claim_host(dev->pfunction);
if (function == 0)
sdio_f0_writeb(dev->pfunction, *data, addr, &status);
else
sdio_writeb(dev->pfunction, *data, addr, &status);
- sdio_release_host(dev->pfunction);
+ if (likely(dev->sdio_irq_task != current))
+ sdio_release_host(dev->pfunction);
return status;
}
@@ -498,11 +497,13 @@ static int rsi_sdio_read_register_multiple(struct rsi_hw *adapter,
(struct rsi_91x_sdiodev *)adapter->rsi_dev;
u32 status;
- sdio_claim_host(dev->pfunction);
+ if (likely(dev->sdio_irq_task != current))
+ sdio_claim_host(dev->pfunction);
status = sdio_readsb(dev->pfunction, data, addr, count);
- sdio_release_host(dev->pfunction);
+ if (likely(dev->sdio_irq_task != current))
+ sdio_release_host(dev->pfunction);
if (status != 0)
rsi_dbg(ERR_ZONE, "%s: Synch Cmd53 read failed\n", __func__);
@@ -540,11 +541,13 @@ int rsi_sdio_write_register_multiple(struct rsi_hw *adapter,
dev->write_fail++;
}
- sdio_claim_host(dev->pfunction);
+ if (likely(dev->sdio_irq_task != current))
+ sdio_claim_host(dev->pfunction);
status = sdio_writesb(dev->pfunction, addr, data, count);
- sdio_release_host(dev->pfunction);
+ if (likely(dev->sdio_irq_task != current))
+ sdio_release_host(dev->pfunction);
if (status) {
rsi_dbg(ERR_ZONE, "%s: Synch Cmd53 write failed %d\n",
@@ -581,7 +584,6 @@ static int rsi_sdio_load_data_master_write(struct rsi_hw *adapter,
}
for (offset = 0, i = 0; i < num_blocks; i++, offset += block_size) {
- memset(temp_buf, 0, block_size);
memcpy(temp_buf, ta_firmware + offset, block_size);
lsb_address = (u16)base_address;
status = rsi_sdio_write_register_multiple
@@ -857,7 +859,7 @@ static int rsi_init_sdio_interface(struct rsi_hw *adapter,
sdio_release_host(pfunction);
adapter->determine_event_timeout = rsi_sdio_determine_event_timeout;
- adapter->check_hw_queue_status = rsi_sdio_read_buffer_status_register;
+ adapter->check_hw_queue_status = rsi_sdio_check_buffer_status;
#ifdef CONFIG_RSI_DEBUGFS
adapter->num_debugfs_entries = MAX_DEBUGFS_ENTRIES;
@@ -941,6 +943,84 @@ fail:
return 1;
}
+static void ulp_read_write(struct rsi_hw *adapter, u16 addr, u32 data,
+ u16 len_in_bits)
+{
+ rsi_sdio_master_reg_write(adapter, RSI_GSPI_DATA_REG1,
+ ((addr << 6) | ((data >> 16) & 0xffff)), 2);
+ rsi_sdio_master_reg_write(adapter, RSI_GSPI_DATA_REG0,
+ (data & 0xffff), 2);
+ rsi_sdio_master_reg_write(adapter, RSI_GSPI_CTRL_REG0,
+ RSI_GSPI_CTRL_REG0_VALUE, 2);
+ rsi_sdio_master_reg_write(adapter, RSI_GSPI_CTRL_REG1,
+ ((len_in_bits - 1) | RSI_GSPI_TRIG), 2);
+ msleep(20);
+}
+
+/*This function resets and re-initializes the chip.*/
+static void rsi_reset_chip(struct rsi_hw *adapter)
+{
+ __le32 data;
+ u8 sdio_interrupt_status = 0;
+ u8 request = 1;
+ int ret;
+
+ rsi_dbg(INFO_ZONE, "Writing disable to wakeup register\n");
+ ret = rsi_sdio_write_register(adapter, 0, SDIO_WAKEUP_REG, &request);
+ if (ret < 0) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to write SDIO wakeup register\n", __func__);
+ return;
+ }
+ msleep(20);
+ ret = rsi_sdio_read_register(adapter, RSI_FN1_INT_REGISTER,
+ &sdio_interrupt_status);
+ if (ret < 0) {
+ rsi_dbg(ERR_ZONE, "%s: Failed to Read Intr Status Register\n",
+ __func__);
+ return;
+ }
+ rsi_dbg(INFO_ZONE, "%s: Intr Status Register value = %d\n",
+ __func__, sdio_interrupt_status);
+
+ /* Put Thread-Arch processor on hold */
+ if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to set ms word to common reg\n",
+ __func__);
+ return;
+ }
+
+ data = TA_HOLD_THREAD_VALUE;
+ if (rsi_sdio_write_register_multiple(adapter, TA_HOLD_THREAD_REG |
+ RSI_SD_REQUEST_MASTER,
+ (u8 *)&data, 4)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to hold Thread-Arch processor threads\n",
+ __func__);
+ return;
+ }
+
+ /* This msleep will ensure Thread-Arch processor to go to hold
+ * and any pending dma transfers to rf spi in device to finish.
+ */
+ msleep(100);
+
+ ulp_read_write(adapter, RSI_ULP_RESET_REG, RSI_ULP_WRITE_0, 32);
+ ulp_read_write(adapter, RSI_WATCH_DOG_TIMER_1, RSI_ULP_WRITE_2, 32);
+ ulp_read_write(adapter, RSI_WATCH_DOG_TIMER_2, RSI_ULP_WRITE_0, 32);
+ ulp_read_write(adapter, RSI_WATCH_DOG_DELAY_TIMER_1, RSI_ULP_WRITE_50,
+ 32);
+ ulp_read_write(adapter, RSI_WATCH_DOG_DELAY_TIMER_2, RSI_ULP_WRITE_0,
+ 32);
+ ulp_read_write(adapter, RSI_WATCH_DOG_TIMER_ENABLE,
+ RSI_ULP_TIMER_ENABLE, 32);
+ /* This msleep will be sufficient for the ulp
+ * read write operations to complete for chip reset.
+ */
+ msleep(500);
+}
+
/**
* rsi_disconnect() - This function performs the reverse of the probe function.
* @pfunction: Pointer to the sdio_func structure.
@@ -956,17 +1036,26 @@ static void rsi_disconnect(struct sdio_func *pfunction)
return;
dev = (struct rsi_91x_sdiodev *)adapter->rsi_dev;
+ sdio_claim_host(pfunction);
+ sdio_release_irq(pfunction);
+ sdio_release_host(pfunction);
+ mdelay(10);
- dev->write_fail = 2;
rsi_mac80211_detach(adapter);
+ mdelay(10);
+
+ /* Reset Chip */
+ rsi_reset_chip(adapter);
- sdio_claim_host(pfunction);
- sdio_release_irq(pfunction);
- sdio_disable_func(pfunction);
- rsi_91x_deinit(adapter);
/* Resetting to take care of the case, where-in driver is re-loaded */
+ sdio_claim_host(pfunction);
rsi_reset_card(pfunction);
+ sdio_disable_func(pfunction);
sdio_release_host(pfunction);
+ dev->write_fail = 2;
+ rsi_91x_deinit(adapter);
+ rsi_dbg(ERR_ZONE, "##### RSI SDIO device disconnected #####\n");
+
}
#ifdef CONFIG_PM
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.