diff options
Diffstat (limited to 'drivers/net/wireless/wl12xx/wl1271_conf.h')
| -rw-r--r-- | drivers/net/wireless/wl12xx/wl1271_conf.h | 919 |
1 files changed, 919 insertions, 0 deletions
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h new file mode 100644 index 000000000000..565373ede265 --- /dev/null +++ b/drivers/net/wireless/wl12xx/wl1271_conf.h @@ -0,0 +1,919 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Luciano Coelho <luciano.coelho@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL1271_CONF_H__ +#define __WL1271_CONF_H__ + +enum { + CONF_HW_BIT_RATE_1MBPS = BIT(0), + CONF_HW_BIT_RATE_2MBPS = BIT(1), + CONF_HW_BIT_RATE_5_5MBPS = BIT(2), + CONF_HW_BIT_RATE_6MBPS = BIT(3), + CONF_HW_BIT_RATE_9MBPS = BIT(4), + CONF_HW_BIT_RATE_11MBPS = BIT(5), + CONF_HW_BIT_RATE_12MBPS = BIT(6), + CONF_HW_BIT_RATE_18MBPS = BIT(7), + CONF_HW_BIT_RATE_22MBPS = BIT(8), + CONF_HW_BIT_RATE_24MBPS = BIT(9), + CONF_HW_BIT_RATE_36MBPS = BIT(10), + CONF_HW_BIT_RATE_48MBPS = BIT(11), + CONF_HW_BIT_RATE_54MBPS = BIT(12), + CONF_HW_BIT_RATE_MCS_0 = BIT(13), + CONF_HW_BIT_RATE_MCS_1 = BIT(14), + CONF_HW_BIT_RATE_MCS_2 = BIT(15), + CONF_HW_BIT_RATE_MCS_3 = BIT(16), + CONF_HW_BIT_RATE_MCS_4 = BIT(17), + CONF_HW_BIT_RATE_MCS_5 = BIT(18), + CONF_HW_BIT_RATE_MCS_6 = BIT(19), + CONF_HW_BIT_RATE_MCS_7 = BIT(20) +}; + +enum { + CONF_HW_RATE_INDEX_1MBPS = 0, + CONF_HW_RATE_INDEX_2MBPS = 1, + CONF_HW_RATE_INDEX_5_5MBPS = 2, + CONF_HW_RATE_INDEX_6MBPS = 3, + CONF_HW_RATE_INDEX_9MBPS = 4, + CONF_HW_RATE_INDEX_11MBPS = 5, + CONF_HW_RATE_INDEX_12MBPS = 6, + CONF_HW_RATE_INDEX_18MBPS = 7, + CONF_HW_RATE_INDEX_22MBPS = 8, + CONF_HW_RATE_INDEX_24MBPS = 9, + CONF_HW_RATE_INDEX_36MBPS = 10, + CONF_HW_RATE_INDEX_48MBPS = 11, + CONF_HW_RATE_INDEX_54MBPS = 12, + CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_54MBPS, +}; + +struct conf_sg_settings { + /* + * Defines the PER threshold in PPM of the BT voice of which reaching + * this value will trigger raising the priority of the BT voice by + * the BT IP until next NFS sample interval time as defined in + * nfs_sample_interval. + * + * Unit: PER value in PPM (parts per million) + * #Error_packets / #Total_packets + + * Range: u32 + */ + u32 per_threshold; + + /* + * This value is an absolute time in micro-seconds to limit the + * maximum scan duration compensation while in SG + */ + u32 max_scan_compensation_time; + + /* Defines the PER threshold of the BT voice of which reaching this + * value will trigger raising the priority of the BT voice until next + * NFS sample interval time as defined in sample_interval. + * + * Unit: msec + * Range: 1-65000 + */ + u16 nfs_sample_interval; + + /* + * Defines the load ratio for the BT. + * The WLAN ratio is: 100 - load_ratio + * + * Unit: Percent + * Range: 0-100 + */ + u8 load_ratio; + + /* + * true - Co-ex is allowed to enter/exit P.S automatically and + * transparently to the host + * + * false - Co-ex is disallowed to enter/exit P.S and will trigger an + * event to the host to notify for the need to enter/exit P.S + * due to BT change state + * + */ + u8 auto_ps_mode; + + /* + * This parameter defines the compensation percentage of num of probe + * requests in case scan is initiated during BT voice/BT ACL + * guaranteed link. + * + * Unit: Percent + * Range: 0-255 (0 - No compensation) + */ + u8 probe_req_compensation; + + /* + * This parameter defines the compensation percentage of scan window + * size in case scan is initiated during BT voice/BT ACL Guaranteed + * link. + * + * Unit: Percent + * Range: 0-255 (0 - No compensation) + */ + u8 scan_window_compensation; + + /* + * Defines the antenna configuration. + * + * Range: 0 - Single Antenna; 1 - Dual Antenna + */ + u8 antenna_config; + + /* + * The percent out of the Max consecutive beacon miss roaming trigger + * which is the threshold for raising the priority of beacon + * reception. + * + * Range: 1-100 + * N = MaxConsecutiveBeaconMiss + * P = coexMaxConsecutiveBeaconMissPrecent + * Threshold = MIN( N-1, round(N * P / 100)) + */ + u8 beacon_miss_threshold; + + /* + * The RX rate threshold below which rate adaptation is assumed to be + * occurring at the AP which will raise priority for ACTIVE_RX and RX + * SP. + * + * Range: HW_BIT_RATE_* + */ + u32 rate_adaptation_threshold; + + /* + * The SNR above which the RX rate threshold indicating AP rate + * adaptation is valid + * + * Range: -128 - 127 + */ + s8 rate_adaptation_snr; +}; + +enum conf_rx_queue_type { + CONF_RX_QUEUE_TYPE_LOW_PRIORITY, /* All except the high priority */ + CONF_RX_QUEUE_TYPE_HIGH_PRIORITY, /* Management and voice packets */ +}; + +struct conf_rx_settings { + /* + * The maximum amount of time, in TU, before the + * firmware discards the MSDU. + * + * Range: 0 - 0xFFFFFFFF + */ + u32 rx_msdu_life_time; + + /* + * Packet detection threshold in the PHY. + * + * FIXME: details unknown. + */ + u32 packet_detection_threshold; + + /* + * The longest time the STA will wait to receive traffic from the AP + * after a PS-poll has been transmitted. + * + * Range: 0 - 200000 + */ + u16 ps_poll_timeout; + /* + * The longest time the STA will wait to receive traffic from the AP + * after a frame has been sent from an UPSD enabled queue. + * + * Range: 0 - 200000 + */ + u16 upsd_timeout; + + /* + * The number of octets in an MPDU, below which an RTS/CTS + * handshake is not performed. + * + * Range: 0 - 4096 + */ + u16 rts_threshold; + + /* + * The RX Clear Channel Assessment threshold in the PHY + * (the energy threshold). + * + * Range: ENABLE_ENERGY_D == 0x140A + * DISABLE_ENERGY_D == 0xFFEF + */ + u16 rx_cca_threshold; + + /* + * Occupied Rx mem-blocks number which requires interrupting the host + * (0 = no buffering, 0xffff = disabled). + * + * Range: u16 + */ + u16 irq_blk_threshold; + + /* + * Rx packets number which requires interrupting the host + * (0 = no buffering). + * + * Range: u16 + */ + u16 irq_pkt_threshold; + + /* + * Max time in msec the FW may delay RX-Complete interrupt. + * + * Range: 1 - 100 + */ + u16 irq_timeout; + + /* + * The RX queue type. + * + * Range: RX_QUEUE_TYPE_RX_LOW_PRIORITY, RX_QUEUE_TYPE_RX_HIGH_PRIORITY, + */ + u8 queue_type; +}; + +#define CONF_TX_MAX_RATE_CLASSES 8 + +#define CONF_TX_RATE_MASK_UNSPECIFIED 0 +#define CONF_TX_RATE_MASK_ALL 0x1eff +#define CONF_TX_RATE_RETRY_LIMIT 10 + +struct conf_tx_rate_class { + + /* + * The rates enabled for this rate class. + * + * Range: CONF_HW_BIT_RATE_* bit mask + */ + u32 enabled_rates; + + /* + * The dot11 short retry limit used for TX retries. + * + * Range: u8 + */ + u8 short_retry_limit; + + /* + * The dot11 long retry limit used for TX retries. + * + * Range: u8 + */ + u8 long_retry_limit; + + /* + * Flags controlling the attributes of TX transmission. + * + * Range: bit 0: Truncate - when set, FW attempts to send a frame stop + * when the total valid per-rate attempts have + * been exhausted; otherwise transmissions + * will continue at the lowest available rate + * until the appropriate one of the + * short_retry_limit, long_retry_limit, + * dot11_max_transmit_msdu_life_time, or + * max_tx_life_time, is exhausted. + * 1: Preamble Override - indicates if the preamble type + * should be used in TX. + * 2: Preamble Type - the type of the preamble to be used by + * the policy (0 - long preamble, 1 - short preamble. + */ + u8 aflags; +}; + +#define CONF_TX_MAX_AC_COUNT 4 + +/* Slot number setting to start transmission at PIFS interval */ +#define CONF_TX_AIFS_PIFS 1 +/* Slot number setting to start transmission at DIFS interval normal + * DCF access */ +#define CONF_TX_AIFS_DIFS 2 + + +enum conf_tx_ac { + CONF_TX_AC_BE = 0, /* best effort / legacy */ + CONF_TX_AC_BK = 1, /* background */ + CONF_TX_AC_VI = 2, /* video */ + CONF_TX_AC_VO = 3, /* voice */ + CONF_TX_AC_CTS2SELF = 4, /* fictious AC, follows AC_VO */ + CONF_TX_AC_ANY_TID = 0x1f +}; + +struct conf_tx_ac_category { + /* + * The AC class identifier. + * + * Range: enum conf_tx_ac + */ + u8 ac; + + /* + * The contention window minimum size (in slots) for the access + * class. + * + * Range: u8 + */ + u8 cw_min; + + /* + * The contention window maximum size (in slots) for the access + * class. + * + * Range: u8 + */ + u16 cw_max; + + /* + * The AIF value (in slots) for the access class. + * + * Range: u8 + */ + u8 aifsn; + + /* + * The TX Op Limit (in microseconds) for the access class. + * + * Range: u16 + */ + u16 tx_op_limit; +}; + +#define CONF_TX_MAX_TID_COUNT 7 + +enum { + CONF_CHANNEL_TYPE_DCF = 0, /* DC/LEGACY*/ + CONF_CHANNEL_TYPE_EDCF = 1, /* EDCA*/ + CONF_CHANNEL_TYPE_HCCA = 2, /* HCCA*/ +}; + +enum { + CONF_PS_SCHEME_LEGACY = 0, + CONF_PS_SCHEME_UPSD_TRIGGER = 1, + CONF_PS_SCHEME_LEGACY_PSPOLL = 2, + CONF_PS_SCHEME_SAPSD = 3, +}; + +enum { + CONF_ACK_POLICY_LEGACY = 0, + CONF_ACK_POLICY_NO_ACK = 1, + CONF_ACK_POLICY_BLOCK = 2, +}; + + +struct conf_tx_tid { + u8 queue_id; + u8 channel_type; + u8 tsid; + u8 ps_scheme; + u8 ack_policy; + u32 apsd_conf[2]; +}; + +struct conf_tx_settings { + /* + * The TX ED value for TELEC Enable/Disable. + * + * Range: 0, 1 + */ + u8 tx_energy_detection; + + /* + * Configuration for rate classes for TX (currently only one + * rate class supported.) + */ + struct conf_tx_rate_class rc_conf; + + /* + * Configuration for access categories for TX rate control. + */ + u8 ac_conf_count; + struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT]; + + /* + * Configuration for TID parameters. + */ + u8 tid_conf_count; + struct conf_tx_tid tid_conf[CONF_TX_MAX_TID_COUNT]; + + /* + * The TX fragmentation threshold. + * + * Range: u16 + */ + u16 frag_threshold; + + /* + * Max time in msec the FW may delay frame TX-Complete interrupt. + * + * Range: u16 + */ + u16 tx_compl_timeout; + + /* + * Completed TX packet count which requires to issue the TX-Complete + * interrupt. + * + * Range: u16 + */ + u16 tx_compl_threshold; + +}; + +enum { + CONF_WAKE_UP_EVENT_BEACON = 0x01, /* Wake on every Beacon*/ + CONF_WAKE_UP_EVENT_DTIM = 0x02, /* Wake on every DTIM*/ + CONF_WAKE_UP_EVENT_N_DTIM = 0x04, /* Wake every Nth DTIM */ + CONF_WAKE_UP_EVENT_N_BEACONS = 0x08, /* Wake every Nth beacon */ + CONF_WAKE_UP_EVENT_BITS_MASK = 0x0F +}; + +#define CONF_MAX_BCN_FILT_IE_COUNT 32 + +#define CONF_BCN_RULE_PASS_ON_CHANGE BIT(0) +#define CONF_BCN_RULE_PASS_ON_APPEARANCE BIT(1) + +#define CONF_BCN_IE_OUI_LEN 3 +#define CONF_BCN_IE_VER_LEN 2 + +struct conf_bcn_filt_rule { + /* + * IE number to which to associate a rule. + * + * Range: u8 + */ + u8 ie; + + /* + * Rule to associate with the specific ie. + * + * Range: CONF_BCN_RULE_PASS_ON_* + */ + u8 rule; + + /* + * OUI for the vendor specifie IE (221) + */ + u8 oui[CONF_BCN_IE_OUI_LEN]; + + /* + * Type for the vendor specifie IE (221) + */ + u8 type; + + /* + * Version for the vendor specifie IE (221) + */ + u8 version[CONF_BCN_IE_VER_LEN]; +}; + +#define CONF_MAX_RSSI_SNR_TRIGGERS 8 + +enum { + CONF_TRIG_METRIC_RSSI_BEACON = 0, + CONF_TRIG_METRIC_RSSI_DATA, + CONF_TRIG_METRIC_SNR_BEACON, + CONF_TRIG_METRIC_SNR_DATA +}; + +enum { + CONF_TRIG_EVENT_TYPE_LEVEL = 0, + CONF_TRIG_EVENT_TYPE_EDGE +}; + +enum { + CONF_TRIG_EVENT_DIR_LOW = 0, + CONF_TRIG_EVENT_DIR_HIGH, + CONF_TRIG_EVENT_DIR_BIDIR +}; + + +struct conf_sig_trigger { + /* + * The RSSI / SNR threshold value. + * + * FIXME: what is the range? + */ + s16 threshold; + + /* + * Minimum delay between two trigger events for this trigger in ms. + * + * Range: 0 - 60000 + */ + u16 pacing; + + /* + * The measurement data source for this trigger. + * + * Range: CONF_TRIG_METRIC_* + */ + u8 metric; + + /* + * The trigger type of this trigger. + * + * Range: CONF_TRIG_EVENT_TYPE_* + */ + u8 type; + + /* + * The direction of the trigger. + * + * Range: CONF_TRIG_EVENT_DIR_* + */ + u8 direction; + + /* + * Hysteresis range of the trigger around the threshold (in dB) + * + * Range: u8 + */ + u8 hysteresis; + + /* + * Index of the trigger rule. + * + * Range: 0 - CONF_MAX_RSSI_SNR_TRIGGERS-1 + */ + u8 index; + + /* + * Enable / disable this rule (to use for clearing rules.) + * + * Range: 1 - Enabled, 2 - Not enabled + */ + u8 enable; +}; + +struct conf_sig_weights { + + /* + * RSSI from beacons average weight. + * + * Range: u8 + */ + u8 rssi_bcn_avg_weight; + + /* + * RSSI from data average weight. + * + * Range: u8 + */ + u8 rssi_pkt_avg_weight; + + /* + * SNR from beacons average weight. + * + * Range: u8 + */ + u8 snr_bcn_avg_weight; + + /* + * SNR from data average weight. + * + * Range: u8 + */ + u8 snr_pkt_avg_weight; +}; + +enum conf_bcn_filt_mode { + CONF_BCN_FILT_MODE_DISABLED = 0, + CONF_BCN_FILT_MODE_ENABLED = 1 +}; + +enum conf_bet_mode { + CONF_BET_MODE_DISABLE = 0, + CONF_BET_MODE_ENABLE = 1, +}; + +struct conf_conn_settings { + /* + * Firmware wakeup conditions configuration. The host may set only + * one bit. + * + * Range: CONF_WAKE_UP_EVENT_* + */ + u8 wake_up_event; + + /* + * Listen interval for beacons or Dtims. + * + * Range: 0 for beacon and Dtim wakeup + * 1-10 for x Dtims + * 1-255 for x beacons + */ + u8 listen_interval; + + /* + * Enable or disable the beacon filtering. + * + * Range: CONF_BCN_FILT_MODE_* + */ + enum conf_bcn_filt_mode bcn_filt_mode; + + /* + * Configure Beacon filter pass-thru rules. + */ + u8 bcn_filt_ie_count; + struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT]; + + /* + * The number of consequtive beacons to lose, before the firmware + * becomes out of synch. + * + * Range: u32 + */ + u32 synch_fail_thold; + + /* + * After out-of-synch, the number of TU's to wait without a further + * received beacon (or probe response) before issuing the BSS_EVENT_LOSE + * event. + * + * Range: u32 + */ + u32 bss_lose_timeout; + + /* + * Beacon receive timeout. + * + * Range: u32 + */ + u32 beacon_rx_timeout; + + /* + * Broadcast receive timeout. + * + * Range: u32 + */ + u32 broadcast_timeout; + + /* + * Enable/disable reception of broadcast packets in power save mode + * + * Range: 1 - enable, 0 - disable + */ + u8 rx_broadcast_in_ps; + + /* + * Consequtive PS Poll failures before sending event to driver + * + * Range: u8 + */ + u8 ps_poll_threshold; + + /* + * Configuration of signal (rssi/snr) triggers. + */ + u8 sig_trigger_count; + struct conf_sig_trigger sig_trigger[CONF_MAX_RSSI_SNR_TRIGGERS]; + + /* + * Configuration of signal average weights. + */ + struct conf_sig_weights sig_weights; + + /* + * Specifies if beacon early termination procedure is enabled or + * disabled. + * + * Range: CONF_BET_MODE_* + */ + u8 bet_enable; + + /* + * Specifies the maximum number of consecutive beacons that may be + * early terminated. After this number is reached at least one full + * beacon must be correctly received in FW before beacon ET + * resumes. + * + * Range 0 - 255 + */ + u8 bet_max_consecutive; + + /* + * Specifies the maximum number of times to try PSM entry if it fails + * (if sending the appropriate null-func message fails.) + * + * Range 0 - 255 + */ + u8 psm_entry_retries; +}; + +#define CONF_SR_ERR_TBL_MAX_VALUES 14 + +struct conf_mart_reflex_err_table { + /* + * Length of the error table values table. + * + * Range: 0 - CONF_SR_ERR_TBL_MAX_VALUES + */ + u8 len; + + /* + * Smart Reflex error table upper limit. + * + * Range: s8 + */ + s8 upper_limit; + + /* + * Smart Reflex error table values. + * + * Range: s8 + */ + s8 values[CONF_SR_ERR_TBL_MAX_VALUES]; +}; + +enum { + CONF_REF_CLK_19_2_E, + CONF_REF_CLK_26_E, + CONF_REF_CLK_38_4_E, + CONF_REF_CLK_52_E +}; + +enum single_dual_band_enum { + CONF_SINGLE_BAND, + CONF_DUAL_BAND +}; + +struct conf_general_parms { + /* + * RF Reference Clock type / speed + * + * Range: CONF_REF_CLK_* + */ + u8 ref_clk; + + /* + * Settling time of the reference clock after boot. + * + * Range: u8 + */ + u8 settling_time; + + /* + * Flag defining whether clock is valid on wakeup. + * + * Range: 0 - not valid on wakeup, 1 - valid on wakeup + */ + u8 clk_valid_on_wakeup; + + /* + * DC-to-DC mode. + * + * Range: Unknown + */ + u8 dc2dcmode; + + /* + * Flag defining whether used as single or dual-band. + * + * Range: CONF_SINGLE_BAND, CONF_DUAL_BAND + */ + u8 single_dual_band; + + /* + * TX bip fem autodetect flag. + * + * Range: Unknown + */ + u8 tx_bip_fem_autodetect; + + /* + * TX bip gem manufacturer. + * + * Range: Unknown + */ + u8 tx_bip_fem_manufacturer; + + /* + * Settings flags. + * + * Range: Unknown + */ + u8 settings; +}; + +#define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15 +#define CONF_NUMBER_OF_SUB_BANDS_5 7 +#define CONF_NUMBER_OF_RATE_GROUPS 6 +#define CONF_NUMBER_OF_CHANNELS_2_4 14 +#define CONF_NUMBER_OF_CHANNELS_5 35 + +struct conf_radio_parms { + /* + * Static radio parameters for 2.4GHz + * + * Range: unknown + */ + u8 rx_trace_loss; + u8 tx_trace_loss; + s8 rx_rssi_and_proc_compens[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE]; + + /* + * Static radio parameters for 5GHz + * + * Range: unknown + */ + u8 rx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5]; + u8 tx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5]; + s8 rx_rssi_and_proc_compens_5[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE]; + + /* + * Dynamic radio parameters for 2.4GHz + * + * Range: unknown + */ + s16 tx_ref_pd_voltage; + s8 tx_ref_power; + s8 tx_offset_db; + + s8 tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS]; + s8 tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS]; + + s8 tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4]; + s8 tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4]; + s8 tx_pdv_rate_offsets[CONF_NUMBER_OF_RATE_GROUPS]; + + u8 tx_ibias[CONF_NUMBER_OF_RATE_GROUPS]; + u8 rx_fem_insertion_loss; + + /* + * Dynamic radio parameters for 5GHz + * + * Range: unknown + */ + s16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5]; + s8 tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5]; + s8 tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5]; + + s8 tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS]; + s8 tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS]; + + s8 tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5]; + s8 tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS]; + + /* FIXME: this is inconsistent with the types for 2.4GHz */ + s8 tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS]; + s8 rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5]; +}; + +#define CONF_SR_ERR_TBL_COUNT 3 + +struct conf_init_settings { + /* + * Configure Smart Reflex error table values. + */ + struct conf_mart_reflex_err_table sr_err_tbl[CONF_SR_ERR_TBL_COUNT]; + + /* + * Smart Reflex enable flag. + * + * Range: 1 - Smart Reflex enabled, 0 - Smart Reflex disabled + */ + u8 sr_enable; + + /* + * Configure general parameters. + */ + struct conf_general_parms genparam; + + /* + * Configure radio parameters. + */ + struct conf_radio_parms radioparam; + +}; + +struct conf_drv_settings { + struct conf_sg_settings sg; + struct conf_rx_settings rx; + struct conf_tx_settings tx; + struct conf_conn_settings conn; + struct conf_init_settings init; +}; + +#endif |