diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/net/phy/realtek.c | 46 |
1 files changed, 36 insertions, 10 deletions
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 879ca37c8508..f5fa2fff3ddc 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -29,6 +29,8 @@ #define RTL8211F_INSR 0x1d #define RTL8211F_TX_DELAY BIT(8) +#define RTL8211F_RX_DELAY BIT(3) + #define RTL8211E_TX_DELAY BIT(1) #define RTL8211E_RX_DELAY BIT(2) #define RTL8211E_MODE_MII_GMII BIT(3) @@ -172,38 +174,62 @@ static int rtl8211c_config_init(struct phy_device *phydev) static int rtl8211f_config_init(struct phy_device *phydev) { struct device *dev = &phydev->mdio.dev; - u16 val; + u16 val_txdly, val_rxdly; int ret; - /* enable TX-delay for rgmii-{id,txid}, and disable it for rgmii and - * rgmii-rxid. The RX-delay can be enabled by the external RXDLY pin. - */ switch (phydev->interface) { case PHY_INTERFACE_MODE_RGMII: + val_txdly = 0; + val_rxdly = 0; + break; + case PHY_INTERFACE_MODE_RGMII_RXID: - val = 0; + val_txdly = 0; + val_rxdly = RTL8211F_RX_DELAY; break; - case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_TXID: - val = RTL8211F_TX_DELAY; + val_txdly = RTL8211F_TX_DELAY; + val_rxdly = 0; + break; + + case PHY_INTERFACE_MODE_RGMII_ID: + val_txdly = RTL8211F_TX_DELAY; + val_rxdly = RTL8211F_RX_DELAY; break; + default: /* the rest of the modes imply leaving delay as is. */ return 0; } ret = phy_modify_paged_changed(phydev, 0xd08, 0x11, RTL8211F_TX_DELAY, - val); + val_txdly); if (ret < 0) { dev_err(dev, "Failed to update the TX delay register\n"); return ret; } else if (ret) { dev_dbg(dev, "%s 2ns TX delay (and changing the value from pin-strapping RXD1 or the bootloader)\n", - val ? "Enabling" : "Disabling"); + val_txdly ? "Enabling" : "Disabling"); } else { dev_dbg(dev, "2ns TX delay was already %s (by pin-strapping RXD1 or bootloader configuration)\n", - val ? "enabled" : "disabled"); + val_txdly ? "enabled" : "disabled"); + } + + ret = phy_modify_paged_changed(phydev, 0xd08, 0x15, RTL8211F_RX_DELAY, + val_rxdly); + if (ret < 0) { + dev_err(dev, "Failed to update the RX delay register\n"); + return ret; + } else if (ret) { + dev_dbg(dev, + "%s 2ns RX delay (and changing the value from pin-strapping RXD0 or the bootloader)\n", + val_rxdly ? "Enabling" : "Disabling"); + } else { + dev_dbg(dev, + "2ns RX delay was already %s (by pin-strapping RXD0 or bootloader configuration)\n", + val_rxdly ? "enabled" : "disabled"); } return 0; |