diff options
Diffstat (limited to 'drivers/net')
89 files changed, 1189 insertions, 6715 deletions
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 1efb08386c61..38c0690df5c8 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -35,6 +35,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/pinctrl/consumer.h> #define DRV_NAME "flexcan" @@ -927,11 +928,16 @@ static int __devinit flexcan_probe(struct platform_device *pdev) struct flexcan_priv *priv; struct resource *mem; struct clk *clk = NULL; + struct pinctrl *pinctrl; void __iomem *base; resource_size_t mem_size; int err, irq; u32 clock_freq = 0; + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) + return PTR_ERR(pinctrl); + if (pdev->dev.of_node) { const u32 *clock_freq_p; diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig index b60d6c5f29a0..03df9a8f2bbf 100644 --- a/drivers/net/can/sja1000/Kconfig +++ b/drivers/net/can/sja1000/Kconfig @@ -75,7 +75,7 @@ config CAN_KVASER_PCI tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" depends on PCI ---help--- - This driver is for the the PCIcanx and PCIcan cards (1, 2 or + This driver is for the PCIcanx and PCIcan cards (1, 2 or 4 channel) from Kvaser (http://www.kvaser.com). config CAN_PLX_PCI diff --git a/drivers/net/ethernet/3com/typhoon.c b/drivers/net/ethernet/3com/typhoon.c index 1234a14b2b73..b15366635147 100644 --- a/drivers/net/ethernet/3com/typhoon.c +++ b/drivers/net/ethernet/3com/typhoon.c @@ -2549,8 +2549,7 @@ typhoon_init(void) static void __exit typhoon_cleanup(void) { - if (typhoon_fw) - release_firmware(typhoon_fw); + release_firmware(typhoon_fw); pci_unregister_driver(&typhoon_driver); } diff --git a/drivers/net/ethernet/amd/ariadne.c b/drivers/net/ethernet/amd/ariadne.c index f4c228e4d76c..f2958df9a1e4 100644 --- a/drivers/net/ethernet/amd/ariadne.c +++ b/drivers/net/ethernet/amd/ariadne.c @@ -213,10 +213,10 @@ static int ariadne_rx(struct net_device *dev) (const void *)priv->rx_buff[entry], pkt_len); skb->protocol = eth_type_trans(skb, dev); - netdev_dbg(dev, "RX pkt type 0x%04x from %pM to %pM data 0x%08x len %d\n", + netdev_dbg(dev, "RX pkt type 0x%04x from %pM to %pM data %p len %u\n", ((u_short *)skb->data)[6], skb->data + 6, skb->data, - (int)skb->data, (int)skb->len); + skb->data, skb->len); netif_rx(skb); dev->stats.rx_packets++; @@ -566,10 +566,10 @@ static netdev_tx_t ariadne_start_xmit(struct sk_buff *skb, /* Fill in a Tx ring entry */ - netdev_dbg(dev, "TX pkt type 0x%04x from %pM to %pM data 0x%08x len %d\n", + netdev_dbg(dev, "TX pkt type 0x%04x from %pM to %pM data %p len %u\n", ((u_short *)skb->data)[6], skb->data + 6, skb->data, - (int)skb->data, (int)skb->len); + skb->data, skb->len); local_irq_save(flags); diff --git a/drivers/net/ethernet/amd/atarilance.c b/drivers/net/ethernet/amd/atarilance.c index 70ed79c46245..84219df72f51 100644 --- a/drivers/net/ethernet/amd/atarilance.c +++ b/drivers/net/ethernet/amd/atarilance.c @@ -558,21 +558,18 @@ static unsigned long __init lance_probe1( struct net_device *dev, printk( "Lance: request for irq %d failed\n", IRQ_AUTO_5 ); return 0; } - dev->irq = (unsigned short)IRQ_AUTO_5; + dev->irq = IRQ_AUTO_5; } else { - /* For VME-RieblCards, request a free VME int; - * (This must be unsigned long, since dev->irq is short and the - * IRQ_MACHSPEC bit would be cut off...) - */ - unsigned long irq = atari_register_vme_int(); + /* For VME-RieblCards, request a free VME int */ + unsigned int irq = atari_register_vme_int(); if (!irq) { printk( "Lance: request for VME interrupt failed\n" ); return 0; } if (request_irq(irq, lance_interrupt, IRQ_TYPE_PRIO, "Riebl-VME Ethernet", dev)) { - printk( "Lance: request for irq %ld failed\n", irq ); + printk( "Lance: request for irq %u failed\n", irq ); return 0; } dev->irq = irq; diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index d55df3290174..edeeb516807a 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -15883,8 +15883,7 @@ static void __devexit tg3_remove_one(struct pci_dev *pdev) if (dev) { struct tg3 *tp = netdev_priv(dev); - if (tp->fw) - release_firmware(tp->fw); + release_firmware(tp->fw); tg3_reset_task_cancel(tp); diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c index 25c4e7f2a099..67cd2ed0306a 100644 --- a/drivers/net/ethernet/brocade/bna/bnad.c +++ b/drivers/net/ethernet/brocade/bna/bnad.c @@ -3520,9 +3520,7 @@ static void __exit bnad_module_exit(void) { pci_unregister_driver(&bnad_pci_driver); - - if (bfi_fw) - release_firmware(bfi_fw); + release_firmware(bfi_fw); } module_init(bnad_module_init); diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h index 0fe18850c838..ec2dafe8ae5b 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h @@ -51,6 +51,8 @@ #define FW_VERSION_MINOR 1 #define FW_VERSION_MICRO 0 +#define CH_WARN(adap, fmt, ...) dev_warn(adap->pdev_dev, fmt, ## __VA_ARGS__) + enum { MAX_NPORTS = 4, /* max # of ports */ SERNUM_LEN = 24, /* Serial # length */ @@ -64,6 +66,15 @@ enum { MEM_MC }; +enum { + MEMWIN0_APERTURE = 65536, + MEMWIN0_BASE = 0x30000, + MEMWIN1_APERTURE = 32768, + MEMWIN1_BASE = 0x28000, + MEMWIN2_APERTURE = 2048, + MEMWIN2_BASE = 0x1b800, +}; + enum dev_master { MASTER_CANT, MASTER_MAY, @@ -403,6 +414,9 @@ struct sge_txq { struct tx_sw_desc *sdesc; /* address of SW Tx descriptor ring */ struct sge_qstat *stat; /* queue status entry */ dma_addr_t phys_addr; /* physical address of the ring */ + spinlock_t db_lock; + int db_disabled; + unsigned short db_pidx; }; struct sge_eth_txq { /* state for an SGE Ethernet Tx queue */ @@ -475,6 +489,7 @@ struct adapter { void __iomem *regs; struct pci_dev *pdev; struct device *pdev_dev; + unsigned int mbox; unsigned int fn; unsigned int flags; @@ -504,6 +519,8 @@ struct adapter { void **tid_release_head; spinlock_t tid_release_lock; struct work_struct tid_release_task; + struct work_struct db_full_task; + struct work_struct db_drop_task; bool tid_release_task_busy; struct dentry *debugfs_root; @@ -605,6 +622,7 @@ irqreturn_t t4_sge_intr_msix(int irq, void *cookie); void t4_sge_init(struct adapter *adap); void t4_sge_start(struct adapter *adap); void t4_sge_stop(struct adapter *adap); +extern int dbfifo_int_thresh; #define for_each_port(adapter, iter) \ for (iter = 0; iter < (adapter)->params.nports; ++iter) @@ -719,4 +737,9 @@ int t4_ctrl_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, int t4_ofld_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, unsigned int vf, unsigned int eqid); int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl); +void t4_db_full(struct adapter *adapter); +void t4_db_dropped(struct adapter *adapter); +int t4_mem_win_read_len(struct adapter *adap, u32 addr, __be32 *data, int len); +int t4_fwaddrspace_write(struct adapter *adap, unsigned int mbox, + u32 addr, u32 val); #endif /* __CXGB4_H__ */ diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index b126b98065a9..e1f96fbb48c1 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -149,15 +149,6 @@ static unsigned int pfvfres_pmask(struct adapter *adapter, #endif enum { - MEMWIN0_APERTURE = 65536, - MEMWIN0_BASE = 0x30000, - MEMWIN1_APERTURE = 32768, - MEMWIN1_BASE = 0x28000, - MEMWIN2_APERTURE = 2048, - MEMWIN2_BASE = 0x1b800, -}; - -enum { MAX_TXQ_ENTRIES = 16384, MAX_CTRL_TXQ_ENTRIES = 1024, MAX_RSPQ_ENTRIES = 16384, @@ -371,6 +362,15 @@ static int set_addr_filters(const struct net_device *dev, bool sleep) uhash | mhash, sleep); } +int dbfifo_int_thresh = 10; /* 10 == 640 entry threshold */ +module_param(dbfifo_int_thresh, int, 0644); +MODULE_PARM_DESC(dbfifo_int_thresh, "doorbell fifo interrupt threshold"); + +int dbfifo_drain_delay = 1000; /* usecs to sleep while draining the dbfifo */ +module_param(dbfifo_drain_delay, int, 0644); +MODULE_PARM_DESC(dbfifo_drain_delay, + "usecs to sleep while draining the dbfifo"); + /* * Set Rx properties of a port, such as promiscruity, address filters, and MTU. * If @mtu is -1 it is left unchanged. @@ -389,6 +389,8 @@ static int set_rxmode(struct net_device *dev, int mtu, bool sleep_ok) return ret; } +static struct workqueue_struct *workq; + /** * link_start - enable a port * @dev: the port to enable @@ -2196,7 +2198,7 @@ static void cxgb4_queue_tid_release(struct tid_info *t, unsigned int chan, adap->tid_release_head = (void **)((uintptr_t)p | chan); if (!adap->tid_release_task_busy) { adap->tid_release_task_busy = true; - schedule_work(&adap->tid_release_task); + queue_work(workq, &adap->tid_release_task); } spin_unlock_bh(&adap->tid_release_lock); } @@ -2366,6 +2368,16 @@ unsigned int cxgb4_port_chan(const struct net_device *dev) } EXPORT_SYMBOL(cxgb4_port_chan); +unsigned int cxgb4_dbfifo_count(const struct net_device *dev, int lpfifo) +{ + struct adapter *adap = netdev2adap(dev); + u32 v; + + v = t4_read_reg(adap, A_SGE_DBFIFO_STATUS); + return lpfifo ? G_LP_COUNT(v) : G_HP_COUNT(v); +} +EXPORT_SYMBOL(cxgb4_dbfifo_count); + /** * cxgb4_port_viid - get the VI id of a port * @dev: the net device for the port @@ -2413,6 +2425,59 @@ void cxgb4_iscsi_init(struct net_device *dev, unsigned int tag_mask, } EXPORT_SYMBOL(cxgb4_iscsi_init); +int cxgb4_flush_eq_cache(struct net_device *dev) +{ + struct adapter *adap = netdev2adap(dev); + int ret; + + ret = t4_fwaddrspace_write(adap, adap->mbox, + 0xe1000000 + A_SGE_CTXT_CMD, 0x20000000); + return ret; +} +EXPORT_SYMBOL(cxgb4_flush_eq_cache); + +static int read_eq_indices(struct adapter *adap, u16 qid, u16 *pidx, u16 *cidx) +{ + u32 addr = t4_read_reg(adap, A_SGE_DBQ_CTXT_BADDR) + 24 * qid + 8; + __be64 indices; + int ret; + + ret = t4_mem_win_read_len(adap, addr, (__be32 *)&indices, 8); + if (!ret) { + indices = be64_to_cpu(indices); + *cidx = (indices >> 25) & 0xffff; + *pidx = (indices >> 9) & 0xffff; + } + return ret; +} + +int cxgb4_sync_txq_pidx(struct net_device *dev, u16 qid, u16 pidx, + u16 size) +{ + struct adapter *adap = netdev2adap(dev); + u16 hw_pidx, hw_cidx; + int ret; + + ret = read_eq_indices(adap, qid, &hw_pidx, &hw_cidx); + if (ret) + goto out; + + if (pidx != hw_pidx) { + u16 delta; + + if (pidx >= hw_pidx) + delta = pidx - hw_pidx; + else + delta = size - hw_pidx + pidx; + wmb(); + t4_write_reg(adap, MYPF_REG(A_SGE_PF_KDOORBELL), + V_QID(qid) | V_PIDX(delta)); + } +out: + return ret; +} +EXPORT_SYMBOL(cxgb4_sync_txq_pidx); + static struct pci_driver cxgb4_driver; static void check_neigh_update(struct neighbour *neigh) @@ -2446,6 +2511,144 @@ static struct notifier_block cxgb4_netevent_nb = { .notifier_call = netevent_cb }; +static void drain_db_fifo(struct adapter *adap, int usecs) +{ + u32 v; + + do { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(usecs_to_jiffies(usecs)); + v = t4_read_reg(adap, A_SGE_DBFIFO_STATUS); + if (G_LP_COUNT(v) == 0 && G_HP_COUNT(v) == 0) + break; + } while (1); +} + +static void disable_txq_db(struct sge_txq *q) +{ + spin_lock_irq(&q->db_lock); + q->db_disabled = 1; + spin_unlock_irq(&q->db_lock); +} + +static void enable_txq_db(struct sge_txq *q) +{ + spin_lock_irq(&q->db_lock); + q->db_disabled = 0; + spin_unlock_irq(&q->db_lock); +} + +static void disable_dbs(struct adapter *adap) +{ + int i; + + for_each_ethrxq(&adap->sge, i) + disable_txq_db(&adap->sge.ethtxq[i].q); + for_each_ofldrxq(&adap->sge, i) + disable_txq_db(&adap->sge.ofldtxq[i].q); + for_each_port(adap, i) + disable_txq_db(&adap->sge.ctrlq[i].q); +} + +static void enable_dbs(struct adapter *adap) +{ + int i; + + for_each_ethrxq(&adap->sge, i) + enable_txq_db(&adap->sge.ethtxq[i].q); + for_each_ofldrxq(&adap->sge, i) + enable_txq_db(&adap->sge.ofldtxq[i].q); + for_each_port(adap, i) + enable_txq_db(&adap->sge.ctrlq[i].q); +} + +static void sync_txq_pidx(struct adapter *adap, struct sge_txq *q) +{ + u16 hw_pidx, hw_cidx; + int ret; + + spin_lock_bh(&q->db_lock); + ret = read_eq_indices(adap, (u16)q->cntxt_id, &hw_pidx, &hw_cidx); + if (ret) + goto out; + if (q->db_pidx != hw_pidx) { + u16 delta; + + if (q->db_pidx >= hw_pidx) + delta = q->db_pidx - hw_pidx; + else + delta = q->size - hw_pidx + q->db_pidx; + wmb(); + t4_write_reg(adap, MYPF_REG(A_SGE_PF_KDOORBELL), + V_QID(q->cntxt_id) | V_PIDX(delta)); + } +out: + q->db_disabled = 0; + spin_unlock_bh(&q->db_lock); + if (ret) + CH_WARN(adap, "DB drop recovery failed.\n"); +} +static void recover_all_queues(struct adapter *adap) +{ + int i; + + for_each_ethrxq(&adap->sge, i) + sync_txq_pidx(adap, &adap->sge.ethtxq[i].q); + for_each_ofldrxq(&adap->sge, i) + sync_txq_pidx(adap, &adap->sge.ofldtxq[i].q); + for_each_port(adap, i) + sync_txq_pidx(adap, &adap->sge.ctrlq[i].q); +} + +static void notify_rdma_uld(struct adapter *adap, enum cxgb4_control cmd) +{ + mutex_lock(&uld_mutex); + if (adap->uld_handle[CXGB4_ULD_RDMA]) + ulds[CXGB4_ULD_RDMA].control(adap->uld_handle[CXGB4_ULD_RDMA], + cmd); + mutex_unlock(&uld_mutex); +} + +static void process_db_full(struct work_struct *work) +{ + struct adapter *adap; + + adap = container_of(work, struct adapter, db_full_task); + + notify_rdma_uld(adap, CXGB4_CONTROL_DB_FULL); + drain_db_fifo(adap, dbfifo_drain_delay); + t4_set_reg_field(adap, A_SGE_INT_ENABLE3, + F_DBFIFO_HP_INT | F_DBFIFO_LP_INT, + F_DBFIFO_HP_INT | F_DBFIFO_LP_INT); + notify_rdma_uld(adap, CXGB4_CONTROL_DB_EMPTY); +} + +static void process_db_drop(struct work_struct *work) +{ + struct adapter *adap; + + adap = container_of(work, struct adapter, db_drop_task); + + t4_set_reg_field(adap, A_SGE_DOORBELL_CONTROL, F_DROPPED_DB, 0); + disable_dbs(adap); + notify_rdma_uld(adap, CXGB4_CONTROL_DB_DROP); + drain_db_fifo(adap, 1); + recover_all_queues(adap); + enable_dbs(adap); +} + +void t4_db_full(struct adapter *adap) +{ + t4_set_reg_field(adap, A_SGE_INT_ENABLE3, + F_DBFIFO_HP_INT | F_DBFIFO_LP_INT, 0); + queue_work(workq, &adap->db_full_task); +} + +void t4_db_dropped(struct adapter *adap) +{ + queue_work(workq, &adap->db_drop_task); +} + static void uld_attach(struct adapter *adap, unsigned int uld) { void *handle; @@ -2479,6 +2682,7 @@ static void uld_attach(struct adapter *adap, unsigned int uld) lli.gts_reg = adap->regs + MYPF_REG(SGE_PF_GTS); lli.db_reg = adap->regs + MYPF_REG(SGE_PF_KDOORBELL); lli.fw_vers = adap->params.fw_vers; + lli.dbfifo_int_thresh = dbfifo_int_thresh; handle = ulds[uld].add(&lli); if (IS_ERR(handle)) { @@ -2649,6 +2853,8 @@ static void cxgb_down(struct adapter *adapter) { t4_intr_disable(adapter); cancel_work_sync(&adapter->tid_release_task); + cancel_work_sync(&adapter->db_full_task); + cancel_work_sync(&adapter->db_drop_task); adapter->tid_release_task_busy = false; adapter->tid_release_head = NULL; @@ -3593,6 +3799,7 @@ static int __devinit init_one(struct pci_dev *pdev, adapter->pdev = pdev; adapter->pdev_dev = &pdev->dev; + adapter->mbox = func; adapter->fn = func; adapter->msg_enable = dflt_msg_enable; memset(adapter->chan_map, 0xff, sizeof(adapter->chan_map)); @@ -3601,6 +3808,8 @@ static int __devinit init_one(struct pci_dev *pdev, spin_lock_init(&adapter->tid_release_lock); INIT_WORK(&adapter->tid_release_task, process_tid_release_list); + INIT_WORK(&adapter->db_full_task, process_db_full); + INIT_WORK(&adapter->db_drop_task, process_db_drop); err = t4_prep_adapter(adapter); if (err) @@ -3788,6 +3997,10 @@ static int __init cxgb4_init_module(void) { int ret; + workq = create_singlethread_workqueue("cxgb4"); + if (!workq) + return -ENOMEM; + /* Debugfs support is optional, just warn if this fails */ cxgb4_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL); if (!cxgb4_debugfs_root) @@ -3803,6 +4016,8 @@ static void __exit cxgb4_cleanup_module(void) { pci_unregister_driver(&cxgb4_driver); debugfs_remove(cxgb4_debugfs_root); /* NULL ok */ + flush_workqueue(workq); + destroy_workqueue(workq); } module_init(cxgb4_init_module); diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h index b1d39b8d141a..d79980c5fc63 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h @@ -163,6 +163,12 @@ enum cxgb4_state { CXGB4_STATE_DETACH }; +enum cxgb4_control { + CXGB4_CONTROL_DB_FULL, + CXGB4_CONTROL_DB_EMPTY, + CXGB4_CONTROL_DB_DROP, +}; + struct pci_dev; struct l2t_data; struct net_device; @@ -212,6 +218,7 @@ struct cxgb4_lld_info { unsigned short ucq_density; /* # of user CQs/page */ void __iomem *gts_reg; /* address of GTS register */ void __iomem *db_reg; /* address of kernel doorbell */ + int dbfifo_int_thresh; /* doorbell fifo int threshold */ }; struct cxgb4_uld_info { @@ -220,11 +227,13 @@ struct cxgb4_uld_info { int (*rx_handler)(void *handle, const __be64 *rsp, const struct pkt_gl *gl); int (*state_change)(void *handle, enum cxgb4_state new_state); + int (*control)(void *handle, enum cxgb4_control control, ...); }; int cxgb4_register_uld(enum cxgb4_uld type, const struct cxgb4_uld_info *p); int cxgb4_unregister_uld(enum cxgb4_uld type); int cxgb4_ofld_send(struct net_device *dev, struct sk_buff *skb); +unsigned int cxgb4_dbfifo_count(const struct net_device *dev, int lpfifo); unsigned int cxgb4_port_chan(const struct net_device *dev); unsigned int cxgb4_port_viid(const struct net_device *dev); unsigned int cxgb4_port_idx(const struct net_device *dev); @@ -236,4 +245,6 @@ void cxgb4_iscsi_init(struct net_device *dev, unsigned int tag_mask, const unsigned int *pgsz_order); struct sk_buff *cxgb4_pktgl_to_skb(const struct pkt_gl *gl, unsigned int skb_len, unsigned int pull_len); +int cxgb4_sync_txq_pidx(struct net_device *dev, u16 qid, u16 pidx, u16 size); +int cxgb4_flush_eq_cache(struct net_device *dev); #endif /* !__CXGB4_OFLD_H */ diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c index 2dae7959f000..e111d974afd8 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c @@ -767,8 +767,13 @@ static void write_sgl(const struct sk_buff *skb, struct sge_txq *q, static inline void ring_tx_db(struct adapter *adap, struct sge_txq *q, int n) { wmb(); /* write descriptors before telling HW */ - t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL), - QID(q->cntxt_id) | PIDX(n)); + spin_lock(&q->db_lock); + if (!q->db_disabled) { + t4_write_reg(adap, MYPF_REG(A_SGE_PF_KDOORBELL), + V_QID(q->cntxt_id) | V_PIDX(n)); + } + q->db_pidx = q->pidx; + spin_unlock(&q->db_lock); } /** @@ -2081,6 +2086,7 @@ static void init_txq(struct adapter *adap, struct sge_txq *q, unsigned int id) q->stops = q->restarts = 0; q->stat = (void *)&q->desc[q->size]; q->cntxt_id = id; + spin_lock_init(&q->db_lock); adap->sge.egr_map[id - adap->sge.egr_start] = q; } @@ -2415,6 +2421,18 @@ void t4_sge_init(struct adapter *adap) RXPKTCPLMODE | (STAT_LEN == 128 ? EGRSTATUSPAGESIZE : 0)); + /* + * Set up to drop DOORBELL writes when the DOORBELL FIFO overflows + * and generate an interrupt when this occurs so we can recover. + */ + t4_set_reg_field(adap, A_SGE_DBFIFO_STATUS, + V_HP_INT_THRESH(M_HP_INT_THRESH) | + V_LP_INT_THRESH(M_LP_INT_THRESH), + V_HP_INT_THRESH(dbfifo_int_thresh) | + V_LP_INT_THRESH(dbfifo_int_thresh)); + t4_set_reg_field(adap, A_SGE_DOORBELL_CONTROL, F_ENABLE_DROP, + F_ENABLE_DROP); + for (i = v = 0; i < 32; i += 4) v |= (PAGE_SHIFT - 10) << i; t4_write_reg(adap, SGE_HOST_PAGE_SIZE, v); diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index d1ec111aebd8..32e1dd566a14 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -868,11 +868,14 @@ int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port) return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } +typedef void (*int_handler_t)(struct adapter *adap); + struct intr_info { unsigned int mask; /* bits to check in interrupt status */ const char *msg; /* message to print or NULL */ short stat_idx; /* stat counter to increment or -1 */ unsigned short fatal; /* whether the condition reported is fatal */ + int_handler_t int_handler; /* platform-specific int handler */ }; /** @@ -905,6 +908,8 @@ static int t4_handle_intr_status(struct adapter *adapter, unsigned int reg, } else if (acts->msg && printk_ratelimit()) dev_warn(adapter->pdev_dev, "%s (0x%x)\n", acts->msg, status & acts->mask); + if (acts->int_handler) + acts->int_handler(adapter); mask |= acts->mask; } status &= mask; @@ -1013,7 +1018,9 @@ static void sge_intr_handler(struct adapter *adapter) { ERR_INVALID_CIDX_INC, "SGE GTS CIDX increment too large", -1, 0 }, { ERR_CPL_OPCODE_0, "SGE received 0-length CPL", -1, 0 }, - { ERR_DROPPED_DB, "SGE doorbell dropped", -1, 0 }, + { F_DBFIFO_LP_INT, NULL, -1, 0, t4_db_full }, + { F_DBFIFO_HP_INT, NULL, -1, 0, t4_db_full }, + { F_ERR_DROPPED_DB, NULL, -1, 0, t4_db_dropped }, { ERR_DATA_CPL_ON_HIGH_QID1 | ERR_DATA_CPL_ON_HIGH_QID0, "SGE IQID > 1023 received CPL for FL", -1, 0 }, { ERR_BAD_DB_PIDX3, "SGE DBP 3 pidx increment too large", -1, @@ -1034,10 +1041,10 @@ static void sge_intr_handler(struct adapter *adapter) }; v = (u64)t4_read_reg(adapter, SGE_INT_CAUSE1) | - ((u64)t4_read_reg(adapter, SGE_INT_CAUSE2) << 32); + ((u64)t4_read_reg(adapter, SGE_INT_CAUSE2) << 32); if (v) { dev_alert(adapter->pdev_dev, "SGE parity error (%#llx)\n", - (unsigned long long)v); + (unsigned long long)v); t4_write_reg(adapter, SGE_INT_CAUSE1, v); t4_write_reg(adapter, SGE_INT_CAUSE2, v >> 32); } @@ -1513,6 +1520,7 @@ void t4_intr_enable(struct adapter *adapter) ERR_BAD_DB_PIDX2 | ERR_BAD_DB_PIDX1 | ERR_BAD_DB_PIDX0 | ERR_ING_CTXT_PRIO | ERR_EGR_CTXT_PRIO | INGRESS_SIZE_ERR | + F_DBFIFO_HP_INT | F_DBFIFO_LP_INT | EGRESS_SIZE_ERR); t4_write_reg(adapter, MYPF_REG(PL_PF_INT_ENABLE), PF_INTR_MASK); t4_set_reg_field(adapter, PL_INT_MAP0, 0, 1 << pf); @@ -1986,6 +1994,54 @@ int t4_wol_pat_enable(struct adapter *adap, unsigned int port, unsigned int map, (var).retval_len16 = htonl(FW_LEN16(var)); \ } while (0) +int t4_fwaddrspace_write(struct adapter *adap, unsigned int mbox, + u32 addr, u32 val) +{ + struct fw_ldst_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_addrspace = htonl(V_FW_CMD_OP(FW_LDST_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_WRITE | + V_FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_FIRMWARE)); + c.cycles_to_len16 = htonl(FW_LEN16(c)); + c.u.addrval.addr = htonl(addr); + c.u.addrval.val = htonl(val); + + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/* + * t4_mem_win_read_len - read memory through PCIE memory window + * @adap: the adapter + * @addr: address of first byte requested aligned on 32b. + * @data: len bytes to hold the data read + * @len: amount of data to read from window. Must be <= + * MEMWIN0_APERATURE after adjusting for 16B alignment + * requirements of the the memory window. + * + * Read len bytes of data from MC starting at @addr. + */ +int t4_mem_win_read_len(struct adapter *adap, u32 addr, __be32 *data, int len) +{ + int i; + int off; + + /* + * Align on a 16B boundary. + */ + off = addr & 15; + if ((addr & 3) || (len + off) > MEMWIN0_APERTURE) + return -EINVAL; + + t4_write_reg(adap, A_PCIE_MEM_ACCESS_OFFSET, addr & ~15); + t4_read_reg(adap, A_PCIE_MEM_ACCESS_OFFSET); + + for (i = 0; i < len; i += 4) + *data++ = t4_read_reg(adap, (MEMWIN0_BASE + off + i)); + + return 0; +} + /** * t4_mdio_rd - read a PHY register through MDIO * @adap: the adapter diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h index 0adc5bcec7c4..111fc323f155 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h @@ -190,6 +190,59 @@ #define SGE_DEBUG_DATA_LOW 0x10d4 #define SGE_INGRESS_QUEUES_PER_PAGE_PF 0x10f4 +#define S_LP_INT_THRESH 12 +#define V_LP_INT_THRESH(x) ((x) << S_LP_INT_THRESH) +#define S_HP_INT_THRESH 28 +#define V_HP_INT_THRESH(x) ((x) << S_HP_INT_THRESH) +#define A_SGE_DBFIFO_STATUS 0x10a4 + +#define S_ENABLE_DROP 13 +#define V_ENABLE_DROP(x) ((x) << S_ENABLE_DROP) +#define F_ENABLE_DROP V_ENABLE_DROP(1U) +#define A_SGE_DOORBELL_CONTROL 0x10a8 + +#define A_SGE_CTXT_CMD 0x11fc +#define A_SGE_DBQ_CTXT_BADDR 0x1084 + +#define A_SGE_PF_KDOORBELL 0x0 + +#define S_QID 15 +#define V_QID(x) ((x) << S_QID) + +#define S_PIDX 0 +#define V_PIDX(x) ((x) << S_PIDX) + +#define M_LP_COUNT 0x7ffU +#define S_LP_COUNT 0 +#define G_LP_COUNT(x) (((x) >> S_LP_COUNT) & M_LP_COUNT) + +#define M_HP_COUNT 0x7ffU +#define S_HP_COUNT 16 +#define G_HP_COUNT(x) (((x) >> S_HP_COUNT) & M_HP_COUNT) + +#define A_SGE_INT_ENABLE3 0x1040 + +#define S_DBFIFO_HP_INT 8 +#define V_DBFIFO_HP_INT(x) ((x) << S_DBFIFO_HP_INT) +#define F_DBFIFO_HP_INT V_DBFIFO_HP_INT(1U) + +#define S_DBFIFO_LP_INT 7 +#define V_DBFIFO_LP_INT(x) ((x) << S_DBFIFO_LP_INT) +#define F_DBFIFO_LP_INT V_DBFIFO_LP_INT(1U) + +#define S_DROPPED_DB 0 +#define V_DROPPED_DB(x) ((x) << S_DROPPED_DB) +#define F_DROPPED_DB V_DROPPED_DB(1U) + +#define S_ERR_DROPPED_DB 18 +#define V_ERR_DROPPED_DB(x) ((x) << S_ERR_DROPPED_DB) +#define F_ERR_DROPPED_DB V_ERR_DROPPED_DB(1U) + +#define A_PCIE_MEM_ACCESS_OFFSET 0x306c + +#define M_HP_INT_THRESH 0xfU +#define M_LP_INT_THRESH 0xfU + #define PCIE_PF_CLI 0x44 #define PCIE_INT_CAUSE 0x3004 #define UNXSPLCPLERR 0x20000000U diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h index edcfd7ec7802..ad53f796b574 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h @@ -1620,4 +1620,19 @@ struct fw_hdr { #define FW_HDR_FW_VER_MINOR_GET(x) (((x) >> 16) & 0xff) #define FW_HDR_FW_VER_MICRO_GET(x) (((x) >> 8) & 0xff) #define FW_HDR_FW_VER_BUILD_GET(x) (((x) >> 0) & 0xff) + +#define S_FW_CMD_OP 24 +#define V_FW_CMD_OP(x) ((x) << S_FW_CMD_OP) + +#define S_FW_CMD_REQUEST 23 +#define V_FW_CMD_REQUEST(x) ((x) << S_FW_CMD_REQUEST) +#define F_FW_CMD_REQUEST V_FW_CMD_REQUEST(1U) + +#define S_FW_CMD_WRITE 21 +#define V_FW_CMD_WRITE(x) ((x) << S_FW_CMD_WRITE) +#define F_FW_CMD_WRITE V_FW_CMD_WRITE(1U) + +#define S_FW_LDST_CMD_ADDRSPACE 0 +#define V_FW_LDST_CMD_ADDRSPACE(x) ((x) << S_FW_LDST_CMD_ADDRSPACE) + #endif /* _T4FW_INTERFACE_H_ */ diff --git a/drivers/net/ethernet/emulex/benet/Makefile b/drivers/net/ethernet/emulex/benet/Makefile index a60cd8051135..1a91b276940d 100644 --- a/drivers/net/ethernet/emulex/benet/Makefile +++ b/drivers/net/ethernet/emulex/benet/Makefile @@ -4,4 +4,4 @@ obj-$(CONFIG_BE2NET) += be2net.o -be2net-y := be_main.o be_cmds.o be_ethtool.o +be2net-y := be_main.o be_cmds.o be_ethtool.o be_roce.o diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index ff4eb8fe25d5..c5c4c0e83bd1 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -32,6 +32,7 @@ #include <linux/u64_stats_sync.h> #include "be_hw.h" +#include "be_roce.h" #define DRV_VER "4.2.220u" #define DRV_NAME "be2net" @@ -102,7 +103,8 @@ static inline char *nic_name(struct pci_dev *pdev) #define MAX_RX_QS (MAX_RSS_QS + 1) /* RSS qs + 1 def Rx */ #define MAX_TX_QS 8 -#define MAX_MSIX_VECTORS MAX_RSS_QS +#define MAX_ROCE_EQS 5 +#define MAX_MSIX_VECTORS (MAX_RSS_QS + MAX_ROCE_EQS) /* RSS qs + RoCE */ #define BE_TX_BUDGET 256 #define BE_NAPI_WEIGHT 64 #define MAX_RX_POST BE_NAPI_WEIGHT /* Frags posted at a time */ @@ -405,6 +407,17 @@ struct be_adapter { u32 tx_fc; /* Tx flow control */ bool stats_cmd_sent; u8 generation; /* BladeEngine ASIC generation */ + u32 if_type; + struct { + u8 __iomem *base; /* Door Bell */ + u32 size; + u32 total_size; + u64 io_addr; + } roce_db; + u32 num_msix_roce_vec; + struct ocrdma_dev *ocrdma_dev; + struct list_head entry; + u32 flash_status; struct completion flash_compl; @@ -441,6 +454,10 @@ struct be_adapter { #define lancer_chip(adapter) ((adapter->pdev->device == OC_DEVICE_ID3) || \ (adapter->pdev->device == OC_DEVICE_ID4)) +#define be_roce_supported(adapter) ((adapter->if_type == SLI_INTF_TYPE_3 || \ + adapter->sli_family == SKYHAWK_SLI_FAMILY) && \ + (adapter->function_mode & RDMA_ENABLED)) + extern const struct ethtool_ops be_ethtool_ops; #define msix_enabled(adapter) (adapter->num_msix_vec > 0) @@ -597,6 +614,12 @@ static inline bool be_is_wol_excluded(struct be_adapter *adapter) } } +static inline bool be_type_2_3(struct be_adapter *adapter) +{ + return (adapter->if_type == SLI_INTF_TYPE_2 || + adapter->if_type == SLI_INTF_TYPE_3) ? true : false; +} + extern void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm, u16 num_popped); extern void be_link_status_update(struct be_adapter *adapter, u8 link_status); @@ -606,4 +629,16 @@ extern bool be_is_wol_supported(struct be_adapter *adapter); extern bool be_pause_supported(struct be_adapter *adapter); extern u32 be_get_fw_log_level(struct be_adapter *adapter); +/* + * internal function to initialize-cleanup roce device. + */ +extern void be_roce_dev_add(struct be_adapter *); +extern void be_roce_dev_remove(struct be_adapter *); + +/* + * internal function to open-close roce device during ifup-ifdown. + */ +extern void be_roce_dev_open(struct be_adapter *); +extern void be_roce_dev_close(struct be_adapter *); + #endif /* BE_H */ diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index b24623cce07b..8d06ea381741 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -15,6 +15,7 @@ * Costa Mesa, CA 92626 */ +#include <linux/module.h> #include "be.h" #include "be_cmds.h" @@ -2646,3 +2647,41 @@ err: spin_unlock_bh(&adapter->mcc_lock); return status; } + +int be_roce_mcc_cmd(void *netdev_handle, void *wrb_payload, + int wrb_payload_size, u16 *cmd_status, u16 *ext_status) +{ + struct be_adapter *adapter = netdev_priv(netdev_handle); + struct be_mcc_wrb *wrb; + struct be_cmd_req_hdr *hdr = (struct be_cmd_req_hdr *) wrb_payload; + struct be_cmd_req_hdr *req; + struct be_cmd_resp_hdr *resp; + int status; + + spin_lock_bh(&adapter->mcc_lock); + + wrb = wrb_from_mccq(adapter); + if (!wrb) { + status = -EBUSY; + goto err; + } + req = embedded_payload(wrb); + resp = embedded_payload(wrb); + + be_wrb_cmd_hdr_prepare(req, hdr->subsystem, + hdr->opcode, wrb_payload_size, wrb, NULL); + memcpy(req, wrb_payload, wrb_payload_size); + be_dws_cpu_to_le(req, wrb_payload_size); + + status = be_mcc_notify_wait(adapter); + if (cmd_status) + *cmd_status = (status & 0xffff); + if (ext_status) + *ext_status = 0; + memcpy(wrb_payload, resp, sizeof(*resp) + resp->response_length); + be_dws_le_to_cpu(wrb_payload, sizeof(*resp) + resp->response_length); +err: + spin_unlock_bh(&adapter->mcc_lock); + return status; +} +EXPORT_SYMBOL(be_roce_mcc_cmd); diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h index 0b1029b60f69..9625bf420c16 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.h +++ b/drivers/net/ethernet/emulex/benet/be_cmds.h @@ -1062,6 +1062,7 @@ struct be_cmd_resp_modify_eq_delay { /* The HW can come up in either of the following multi-channel modes * based on the skew/IPL. */ +#define RDMA_ENABLED 0x4 #define FLEX10_MODE 0x400 #define VNIC_MODE 0x20000 #define UMC_ENABLED 0x1000000 diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h index f38b58c8dbba..d9fb0c501fa1 100644 --- a/drivers/net/ethernet/emulex/benet/be_hw.h +++ b/drivers/net/ethernet/emulex/benet/be_hw.h @@ -100,11 +100,13 @@ #define SLI_INTF_REV_SHIFT 4 #define SLI_INTF_FT_MASK 0x00000001 +#define SLI_INTF_TYPE_2 2 +#define SLI_INTF_TYPE_3 3 /* SLI family */ #define BE_SLI_FAMILY 0x0 #define LANCER_A0_SLI_FAMILY 0xA - +#define SKYHAWK_SLI_FAMILY 0x2 /********* ISR0 Register offset **********/ #define CEV_ISR0_OFFSET 0xC18 diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 081c77701168..08efd308d78a 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2151,10 +2151,17 @@ static uint be_num_rss_want(struct be_adapter *adapter) static void be_msix_enable(struct be_adapter *adapter) { #define BE_MIN_MSIX_VECTORS 1 - int i, status, num_vec; + int i, status, num_vec, num_roce_vec = 0; /* If RSS queues are not used, need a vec for default RX Q */ num_vec = min(be_num_rss_want(adapter), num_online_cpus()); + if (be_roce_supported(adapter)) { + num_roce_vec = min_t(u32, MAX_ROCE_MSIX_VECTORS, + (num_online_cpus() + 1)); + num_roce_vec = min(num_roce_vec, MAX_ROCE_EQS); + num_vec += num_roce_vec; + num_vec = min(num_vec, MAX_MSIX_VECTORS); + } num_vec = max(num_vec, BE_MIN_MSIX_VECTORS); for (i = 0; i < num_vec; i++) @@ -2171,7 +2178,17 @@ static void be_msix_enable(struct be_adapter *adapter) } return; done: - adapter->num_msix_vec = num_vec; + if (be_roce_supported(adapter)) { + if (num_vec > num_roce_vec) { + adapter->num_msix_vec = num_vec - num_roce_vec; + adapter->num_msix_roce_vec = + num_vec - adapter->num_msix_vec; + } else { + adapter->num_msix_vec = num_vec; + adapter->num_msix_roce_vec = 0; + } + } else + adapter->num_msix_vec = num_vec; return; } @@ -2283,6 +2300,8 @@ static int be_close(struct net_device *netdev) struct be_eq_obj *eqo; int i; + be_roce_dev_close(adapter); + be_async_mcc_disable(adapter); if (!lancer_chip(adapter)) @@ -2391,6 +2410,7 @@ static int be_open(struct net_device *netdev) if (!status) be_link_status_update(adapter, link_status); + be_roce_dev_open(adapter); return 0; err: be_close(adapter->netdev); @@ -3232,6 +3252,24 @@ static void be_unmap_pci_bars(struct be_adapter *adapter) iounmap(adapter->csr); if (adapter->db) iounmap(adapter->db); + if (adapter->roce_db.base) + pci_iounmap(adapter->pdev, adapter->roce_db.base); +} + +static int lancer_roce_map_pci_bars(struct be_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + u8 __iomem *addr; + + addr = pci_iomap(pdev, 2, 0); + if (addr == NULL) + return -ENOMEM; + + adapter->roce_db.base = addr; + adapter->roce_db.io_addr = pci_resource_start(pdev, 2); + adapter->roce_db.size = 8192; + adapter->roce_db.total_size = pci_resource_len(pdev, 2); + return 0; } static int be_map_pci_bars(struct be_adapter *adapter) @@ -3240,11 +3278,18 @@ static int be_map_pci_bars(struct be_adapter *adapter) int db_reg; if (lancer_chip(adapter)) { - addr = ioremap_nocache(pci_resource_start(adapter->pdev, 0), - pci_resource_len(adapter->pdev, 0)); - if (addr == NULL) - return -ENOMEM; - adapter->db = addr; + if (be_type_2_3(adapter)) { + addr = ioremap_nocache( + pci_resource_start(adapter->pdev, 0), + pci_resource_len(adapter->pdev, 0)); + if (addr == NULL) + return -ENOMEM; + adapter->db = addr; + } + if (adapter->if_type == SLI_INTF_TYPE_3) { + if (lancer_roce_map_pci_bars(adapter)) + goto pci_map_err; + } return 0; } @@ -3269,14 +3314,19 @@ static int be_map_pci_bars(struct be_adapter *adapter) if (addr == NULL) goto pci_map_err; adapter->db = addr; - + if (adapter->sli_family == SKYHAWK_SLI_FAMILY) { + adapter->roce_db.size = 4096; + adapter->roce_db.io_addr = + pci_resource_start(adapter->pdev, db_reg); + adapter->roce_db.total_size = + pci_resource_len(adapter->pdev, db_reg); + } return 0; pci_map_err: be_unmap_pci_bars(adapter); return -ENOMEM; } - static void be_ctrl_cleanup(struct be_adapter *adapter) { struct be_dma_mem *mem = &adapter->mbox_mem_alloced; @@ -3382,6 +3432,8 @@ static void __devexit be_remove(struct pci_dev *pdev) if (!adapter) return; + be_roce_dev_remove(adapter); + unregister_netdev(adapter->netdev); be_clear(adapter); @@ -3495,17 +3547,27 @@ static int be_dev_type_check(struct be_adapter *adapter) break; case BE_DEVICE_ID2: case OC_DEVICE_ID2: - case OC_DEVICE_ID5: adapter->generation = BE_GEN3; break; case OC_DEVICE_ID3: case OC_DEVICE_ID4: pci_read_config_dword(pdev, SLI_INTF_REG_OFFSET, &sli_intf); + adapter->if_type = (sli_intf & SLI_INTF_IF_TYPE_MASK) >> + SLI_INTF_IF_TYPE_SHIFT; if_type = (sli_intf & SLI_INTF_IF_TYPE_MASK) >> SLI_INTF_IF_TYPE_SHIFT; - if (((sli_intf & SLI_INTF_VALID_MASK) != SLI_INTF_VALID) || - if_type != 0x02) { + !be_type_2_3(adapter)) { + dev_err(&pdev->dev, "SLI_INTF reg val is not valid\n"); + return -EINVAL; + } + adapter->sli_family = ((sli_intf & SLI_INTF_FAMILY_MASK) >> + SLI_INTF_FAMILY_SHIFT); + adapter->generation = BE_GEN3; + break; + case OC_DEVICE_ID5: + pci_read_config_dword(pdev, SLI_INTF_REG_OFFSET, &sli_intf); + if ((sli_intf & SLI_INTF_VALID_MASK) != SLI_INTF_VALID) { dev_err(&pdev->dev, "SLI_INTF reg val is not valid\n"); return -EINVAL; } @@ -3774,6 +3836,8 @@ static int __devinit be_probe(struct pci_dev *pdev, if (status != 0) goto unsetup; + be_roce_dev_add(adapter); + dev_info(&pdev->dev, "%s: %s port %d\n", netdev->name, nic_name(pdev), adapter->port_num); diff --git a/drivers/net/ethernet/emulex/benet/be_roce.c b/drivers/net/ethernet/emulex/benet/be_roce.c new file mode 100644 index 000000000000..deecc44b3617 --- /dev/null +++ b/drivers/net/ethernet/emulex/benet/be_roce.c @@ -0,0 +1,182 @@ +/* + * Copyright (C) 2005 - 2011 Emulex + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. The full GNU General + * Public License is included in this distribution in the file called COPYING. + * + * Contact Information: + * linux-drivers@emulex.com + * + * Emulex + * 3333 Susan Street + * Costa Mesa, CA 92626 + */ + +#include <linux/mutex.h> +#include <linux/list.h> +#include <linux/netdevice.h> +#include <linux/module.h> + +#include "be.h" +#include "be_cmds.h" + +static struct ocrdma_driver *ocrdma_drv; +static LIST_HEAD(be_adapter_list); +static DEFINE_MUTEX(be_adapter_list_lock); + +static void _be_roce_dev_add(struct be_adapter *adapter) +{ + struct be_dev_info dev_info; + int i, num_vec; + struct pci_dev *pdev = adapter->pdev; + + if (!ocrdma_drv) + return; + if (pdev->device == OC_DEVICE_ID5) { + /* only msix is supported on these devices */ + if (!msix_enabled(adapter)) + return; + /* DPP region address and length */ + dev_info.dpp_unmapped_addr = pci_resource_start(pdev, 2); + dev_info.dpp_unmapped_len = pci_resource_len(pdev, 2); + } else { + dev_info.dpp_unmapped_addr = 0; + dev_info.dpp_unmapped_len = 0; + } + dev_info.pdev = adapter->pdev; + if (adapter->sli_family == SKYHAWK_SLI_FAMILY) + dev_info.db = adapter->db; + else + dev_info.db = adapter->roce_db.base; + dev_info.unmapped_db = adapter->roce_db.io_addr; + dev_info.db_page_size = adapter->roce_db.size; + dev_info.db_total_size = adapter->roce_db.total_size; + dev_info.netdev = adapter->netdev; + memcpy(dev_info.mac_addr, adapter->netdev->dev_addr, ETH_ALEN); + dev_info.dev_family = adapter->sli_family; + if (msix_enabled(adapter)) { + /* provide all the vectors, so that EQ creation response + * can decide which one to use. + */ + num_vec = adapter->num_msix_vec + adapter->num_msix_roce_vec; + dev_info.intr_mode = BE_INTERRUPT_MODE_MSIX; + dev_info.msix.num_vectors = min(num_vec, MAX_ROCE_MSIX_VECTORS); + /* provide start index of the vector, + * so in case of linear usage, + * it can use the base as starting point. + */ + dev_info.msix.start_vector = adapter->num_evt_qs; + for (i = 0; i < dev_info.msix.num_vectors; i++) { + dev_info.msix.vector_list[i] = + adapter->msix_entries[i].vector; + } + } else { + dev_info.msix.num_vectors = 0; + dev_info.intr_mode = BE_INTERRUPT_MODE_INTX; + } + adapter->ocrdma_dev = ocrdma_drv->add(&dev_info); +} + +void be_roce_dev_add(struct be_adapter *adapter) +{ + if (be_roce_supported(adapter)) { + INIT_LIST_HEAD(&adapter->entry); + mutex_lock(&be_adapter_list_lock); + list_add_tail(&adapter->entry, &be_adapter_list); + + /* invoke add() routine of roce driver only if + * valid driver registered with add method and add() is not yet + * invoked on a given adapter. + */ + _be_roce_dev_add(adapter); + mutex_unlock(&be_adapter_list_lock); + } +} + +void _be_roce_dev_remove(struct be_adapter *adapter) +{ + if (ocrdma_drv && ocrdma_drv->remove && adapter->ocrdma_dev) + ocrdma_drv->remove(adapter->ocrdma_dev); + adapter->ocrdma_dev = NULL; +} + +void be_roce_dev_remove(struct be_adapter *adapter) +{ + if (be_roce_supported(adapter)) { + mutex_lock(&be_adapter_list_lock); + _be_roce_dev_remove(adapter); + list_del(&adapter->entry); + mutex_unlock(&be_adapter_list_lock); + } +} + +void _be_roce_dev_open(struct be_adapter *adapter) +{ + if (ocrdma_drv && adapter->ocrdma_dev && + ocrdma_drv->state_change_handler) + ocrdma_drv->state_change_handler(adapter->ocrdma_dev, 0); +} + +void be_roce_dev_open(struct be_adapter *adapter) +{ + if (be_roce_supported(adapter)) { + mutex_lock(&be_adapter_list_lock); + _be_roce_dev_open(adapter); + mutex_unlock(&be_adapter_list_lock); + } +} + +void _be_roce_dev_close(struct be_adapter *adapter) +{ + if (ocrdma_drv && adapter->ocrdma_dev && + ocrdma_drv->state_change_handler) + ocrdma_drv->state_change_handler(adapter->ocrdma_dev, 1); +} + +void be_roce_dev_close(struct be_adapter *adapter) +{ + if (be_roce_supported(adapter)) { + mutex_lock(&be_adapter_list_lock); + _be_roce_dev_close(adapter); + mutex_unlock(&be_adapter_list_lock); + } +} + +int be_roce_register_driver(struct ocrdma_driver *drv) +{ + struct be_adapter *dev; + + mutex_lock(&be_adapter_list_lock); + if (ocrdma_drv) { + mutex_unlock(&be_adapter_list_lock); + return -EINVAL; + } + ocrdma_drv = drv; + list_for_each_entry(dev, &be_adapter_list, entry) { + struct net_device *netdev; + _be_roce_dev_add(dev); + netdev = dev->netdev; + if (netif_running(netdev) && netif_oper_up(netdev)) + _be_roce_dev_open(dev); + } + mutex_unlock(&be_adapter_list_lock); + return 0; +} +EXPORT_SYMBOL(be_roce_register_driver); + +void be_roce_unregister_driver(struct ocrdma_driver *drv) +{ + struct be_adapter *dev; + + mutex_lock(&be_adapter_list_lock); + list_for_each_entry(dev, &be_adapter_list, entry) { + if (dev->ocrdma_dev) + _be_roce_dev_remove(dev); + } + ocrdma_drv = NULL; + mutex_unlock(&be_adapter_list_lock); +} +EXPORT_SYMBOL(be_roce_unregister_driver); diff --git a/drivers/net/ethernet/emulex/benet/be_roce.h b/drivers/net/ethernet/emulex/benet/be_roce.h new file mode 100644 index 000000000000..db4ea8081c07 --- /dev/null +++ b/drivers/net/ethernet/emulex/benet/be_roce.h @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2005 - 2011 Emulex + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. The full GNU General + * Public License is included in this distribution in the file called COPYING. + * + * Contact Information: + * linux-drivers@emulex.com + * + * Emulex + * 3333 Susan Street + * Costa Mesa, CA 92626 + */ + +#ifndef BE_ROCE_H +#define BE_ROCE_H + +#include <linux/pci.h> +#include <linux/netdevice.h> + +struct ocrdma_dev; + +enum be_interrupt_mode { + BE_INTERRUPT_MODE_MSIX = 0, + BE_INTERRUPT_MODE_INTX = 1, + BE_INTERRUPT_MODE_MSI = 2, +}; + +#define MAX_ROCE_MSIX_VECTORS 16 +struct be_dev_info { + u8 __iomem *db; + u64 unmapped_db; + u32 db_page_size; + u32 db_total_size; + u64 dpp_unmapped_addr; + u32 dpp_unmapped_len; + struct pci_dev *pdev; + struct net_device *netdev; + u8 mac_addr[ETH_ALEN]; + u32 dev_family; + enum be_interrupt_mode intr_mode; + struct { + int num_vectors; + int start_vector; + u32 vector_list[MAX_ROCE_MSIX_VECTORS]; + } msix; +}; + +/* ocrdma driver register's the callback functions with nic driver. */ +struct ocrdma_driver { + unsigned char name[32]; + struct ocrdma_dev *(*add) (struct be_dev_info *dev_info); + void (*remove) (struct ocrdma_dev *); + void (*state_change_handler) (struct ocrdma_dev *, u32 new_state); +}; + +enum { + BE_DEV_UP = 0, + BE_DEV_DOWN = 1 +}; + +/* APIs for RoCE driver to register callback handlers, + * which will be invoked when device is added, removed, ifup, ifdown + */ +int be_roce_register_driver(struct ocrdma_driver *drv); +void be_roce_unregister_driver(struct ocrdma_driver *drv); + +/* API for RoCE driver to issue mailbox commands */ +int be_roce_mcc_cmd(void *netdev_handle, void *wrb_payload, + int wrb_payload_size, u16 *cmd_status, u16 *ext_status); + +#endif /* BE_ROCE_H */ diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index 7fa0227c9c02..8f2cf8c09e2d 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -48,6 +48,7 @@ #include <linux/of_device.h> #include <linux/of_gpio.h> #include <linux/of_net.h> +#include <linux/pinctrl/consumer.h> #include <asm/cacheflush.h> @@ -1543,6 +1544,7 @@ fec_probe(struct platform_device *pdev) struct resource *r; const struct of_device_id *of_id; static int dev_id; + struct pinctrl *pinctrl; of_id = of_match_device(fec_dt_ids, &pdev->dev); if (of_id) @@ -1610,6 +1612,12 @@ fec_probe(struct platform_device *pdev) } } + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + ret = PTR_ERR(pinctrl); + goto failed_pin; + } + fep->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(fep->clk)) { ret = PTR_ERR(fep->clk); @@ -1640,6 +1648,7 @@ failed_mii_init: failed_init: clk_disable_unprepare(fep->clk); clk_put(fep->clk); +failed_pin: failed_clk: for (i = 0; i < FEC_IRQ_NUM; i++) { irq = platform_get_irq(pdev, i); diff --git a/drivers/net/ethernet/mellanox/mlx4/alloc.c b/drivers/net/ethernet/mellanox/mlx4/alloc.c index 8be20e7ea3d1..06fef5b44f77 100644 --- a/drivers/net/ethernet/mellanox/mlx4/alloc.c +++ b/drivers/net/ethernet/mellanox/mlx4/alloc.c @@ -124,9 +124,6 @@ void mlx4_bitmap_free_range(struct mlx4_bitmap *bitmap, u32 obj, int cnt) spin_lock(&bitmap->lock); bitmap_clear(bitmap->table, obj, cnt); - bitmap->last = min(bitmap->last, obj); - bitmap->top = (bitmap->top + bitmap->max + bitmap->reserved_top) - & bitmap->mask; bitmap->avail += cnt; spin_unlock(&bitmap->lock); } diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c index 24429a99190d..68f5cd6cb3c7 100644 --- a/drivers/net/ethernet/mellanox/mlx4/fw.c +++ b/drivers/net/ethernet/mellanox/mlx4/fw.c @@ -118,6 +118,20 @@ static void dump_dev_cap_flags(struct mlx4_dev *dev, u64 flags) mlx4_dbg(dev, " %s\n", fname[i]); } +static void dump_dev_cap_flags2(struct mlx4_dev *dev, u64 flags) +{ + static const char * const fname[] = { + [0] = "RSS support", + [1] = "RSS Toeplitz Hash Function support", + [2] = "RSS XOR Hash Function support" + }; + int i; + + for (i = 0; i < ARRAY_SIZE(fname); ++i) + if (fname[i] && (flags & (1LL << i))) + mlx4_dbg(dev, " %s\n", fname[i]); +} + int mlx4_MOD_STAT_CFG(struct mlx4_dev *dev, struct mlx4_mod_stat_cfg *cfg) { struct mlx4_cmd_mailbox *mailbox; @@ -346,6 +360,7 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) #define QUERY_DEV_CAP_MAX_REQ_QP_OFFSET 0x29 #define QUERY_DEV_CAP_MAX_RES_QP_OFFSET 0x2b #define QUERY_DEV_CAP_MAX_GSO_OFFSET 0x2d +#define QUERY_DEV_CAP_RSS_OFFSET 0x2e #define QUERY_DEV_CAP_MAX_RDMA_OFFSET 0x2f #define QUERY_DEV_CAP_RSZ_SRQ_OFFSET 0x33 #define QUERY_DEV_CAP_ACK_DELAY_OFFSET 0x35 @@ -390,6 +405,7 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) #define QUERY_DEV_CAP_RSVD_LKEY_OFFSET 0x98 #define QUERY_DEV_CAP_MAX_ICM_SZ_OFFSET 0xa0 + dev_cap->flags2 = 0; mailbox = mlx4_alloc_cmd_mailbox(dev); if (IS_ERR(mailbox)) return PTR_ERR(mailbox); @@ -439,6 +455,17 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) else dev_cap->max_gso_sz = 1 << field; + MLX4_GET(field, outbox, QUERY_DEV_CAP_RSS_OFFSET); + if (field & 0x20) + dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_RSS_XOR; + if (field & 0x10) + dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_RSS_TOP; + field &= 0xf; + if (field) { + dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_RSS; + dev_cap->max_rss_tbl_sz = 1 << field; + } else + dev_cap->max_rss_tbl_sz = 0; MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_RDMA_OFFSET); dev_cap->max_rdma_global = 1 << (field & 0x3f); MLX4_GET(field, outbox, QUERY_DEV_CAP_ACK_DELAY_OFFSET); @@ -632,8 +659,10 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) dev_cap->max_rq_desc_sz, dev_cap->max_rq_sg); mlx4_dbg(dev, "Max GSO size: %d\n", dev_cap->max_gso_sz); mlx4_dbg(dev, "Max counters: %d\n", dev_cap->max_counters); + mlx4_dbg(dev, "Max RSS Table size: %d\n", dev_cap->max_rss_tbl_sz); dump_dev_cap_flags(dev, dev_cap->flags); + dump_dev_cap_flags2(dev, dev_cap->flags2); out: mlx4_free_cmd_mailbox(dev, mailbox); diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.h b/drivers/net/ethernet/mellanox/mlx4/fw.h index e1a5fa56bcbc..64c0399e4b78 100644 --- a/drivers/net/ethernet/mellanox/mlx4/fw.h +++ b/drivers/net/ethernet/mellanox/mlx4/fw.h @@ -79,6 +79,7 @@ struct mlx4_dev_cap { u64 trans_code[MLX4_MAX_PORTS + 1]; u16 stat_rate_support; u64 flags; + u64 flags2; int reserved_uars; int uar_size; int min_page_sz; @@ -110,6 +111,7 @@ struct mlx4_dev_cap { u32 reserved_lkey; u64 max_icm_sz; int max_gso_sz; + int max_rss_tbl_sz; u8 supported_port_types[MLX4_MAX_PORTS + 1]; u8 suggested_type[MLX4_MAX_PORTS + 1]; u8 default_sense[MLX4_MAX_PORTS + 1]; diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 984ace44104f..2e024a68fa81 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -272,10 +272,12 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) dev->caps.max_msg_sz = dev_cap->max_msg_sz; dev->caps.page_size_cap = ~(u32) (dev_cap->min_page_sz - 1); dev->caps.flags = dev_cap->flags; + dev->caps.flags2 = dev_cap->flags2; dev->caps.bmme_flags = dev_cap->bmme_flags; dev->caps.reserved_lkey = dev_cap->reserved_lkey; dev->caps.stat_rate_support = dev_cap->stat_rate_support; dev->caps.max_gso_sz = dev_cap->max_gso_sz; + dev->caps.max_rss_tbl_sz = dev_cap->max_rss_tbl_sz; /* Sense port always allowed on supported devices for ConnectX1 and 2 */ if (dev->pdev->device != 0x1003) diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c index d3469d8e3f0d..8d2666fcffd7 100644 --- a/drivers/net/ethernet/nxp/lpc_eth.c +++ b/drivers/net/ethernet/nxp/lpc_eth.c @@ -40,6 +40,7 @@ #include <linux/skbuff.h> #include <linux/phy.h> #include <linux/dma-mapping.h> +#include <linux/of.h> #include <linux/of_net.h> #include <linux/types.h> @@ -340,13 +341,17 @@ */ #define LPC_POWERDOWN_MACAHB (1 << 31) -/* Upon the upcoming introduction of device tree usage in LPC32xx, - * lpc_phy_interface_mode() and use_iram_for_net() will be extended with a - * device parameter for access to device tree information at runtime, instead - * of defining the values at compile time - */ -static inline phy_interface_t lpc_phy_interface_mode(void) +static phy_interface_t lpc_phy_interface_mode(struct device *dev) { + if (dev && dev->of_node) { + const char *mode = of_get_property(dev->of_node, + "phy-mode", NULL); + if (mode && !strcmp(mode, "mii")) + return PHY_INTERFACE_MODE_MII; + return PHY_INTERFACE_MODE_RMII; + } + + /* non-DT */ #ifdef CONFIG_ARCH_LPC32XX_MII_SUPPORT return PHY_INTERFACE_MODE_MII; #else @@ -354,12 +359,16 @@ static inline phy_interface_t lpc_phy_interface_mode(void) #endif } -static inline int use_iram_for_net(void) +static bool use_iram_for_net(struct device *dev) { + if (dev && dev->of_node) + return of_property_read_bool(dev->of_node, "use-iram"); + + /* non-DT */ #ifdef CONFIG_ARCH_LPC32XX_IRAM_FOR_NET - return 1; + return true; #else - return 0; + return false; #endif } @@ -664,7 +673,7 @@ static void __lpc_eth_init(struct netdata_local *pldat) LPC_ENET_CLRT(pldat->net_base)); writel(LPC_IPGR_LOAD_PART2(0x12), LPC_ENET_IPGR(pldat->net_base)); - if (lpc_phy_interface_mode() == PHY_INTERFACE_MODE_MII) + if (lpc_phy_interface_mode(&pldat->pdev->dev) == PHY_INTERFACE_MODE_MII) writel(LPC_COMMAND_PASSRUNTFRAME, LPC_ENET_COMMAND(pldat->net_base)); else { @@ -804,12 +813,13 @@ static int lpc_mii_probe(struct net_device *ndev) } /* Attach to the PHY */ - if (lpc_phy_interface_mode() == PHY_INTERFACE_MODE_MII) + if (lpc_phy_interface_mode(&pldat->pdev->dev) == PHY_INTERFACE_MODE_MII) netdev_info(ndev, "using MII interface\n"); else netdev_info(ndev, "using RMII interface\n"); phydev = phy_connect(ndev, dev_name(&phydev->dev), - &lpc_handle_link_change, 0, lpc_phy_interface_mode()); + &lpc_handle_link_change, 0, + lpc_phy_interface_mode(&pldat->pdev->dev)); if (IS_ERR(phydev)) { netdev_err(ndev, "Could not attach to PHY\n"); @@ -843,7 +853,7 @@ static int lpc_mii_init(struct netdata_local *pldat) } /* Setup MII mode */ - if (lpc_phy_interface_mode() == PHY_INTERFACE_MODE_MII) + if (lpc_phy_interface_mode(&pldat->pdev->dev) == PHY_INTERFACE_MODE_MII) writel(LPC_COMMAND_PASSRUNTFRAME, LPC_ENET_COMMAND(pldat->net_base)); else { @@ -1315,18 +1325,26 @@ static const struct net_device_ops lpc_netdev_ops = { static int lpc_eth_drv_probe(struct platform_device *pdev) { struct resource *res; - struct resource *dma_res; struct net_device *ndev; struct netdata_local *pldat; struct phy_device *phydev; dma_addr_t dma_handle; int irq, ret; + u32 tmp; + + /* Setup network interface for RMII or MII mode */ + tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL); + tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK; + if (lpc_phy_interface_mode(&pdev->dev) == PHY_INTERFACE_MODE_MII) + tmp |= LPC32XX_CLKPWR_MACCTRL_USE_MII_PINS; + else + tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS; + __raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL); /* Get platform resources */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - dma_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); irq = platform_get_irq(pdev, 0); - if ((!res) || (!dma_res) || (irq < 0) || (irq >= NR_IRQS)) { + if ((!res) || (irq < 0) || (irq >= NR_IRQS)) { dev_err(&pdev->dev, "error getting resources.\n"); ret = -ENXIO; goto err_exit; @@ -1389,17 +1407,19 @@ static int lpc_eth_drv_probe(struct platform_device *pdev) sizeof(struct txrx_desc_t) + sizeof(struct rx_status_t)); pldat->dma_buff_base_v = 0; - if (use_iram_for_net()) { - dma_handle = dma_res->start; + if (use_iram_for_net(&pldat->pdev->dev)) { + dma_handle = LPC32XX_IRAM_BASE; if (pldat->dma_buff_size <= lpc32xx_return_iram_size()) pldat->dma_buff_base_v = - io_p2v(dma_res->start); + io_p2v(LPC32XX_IRAM_BASE); else netdev_err(ndev, "IRAM not big enough for net buffers, using SDRAM instead.\n"); } if (pldat->dma_buff_base_v == 0) { + pldat->pdev->dev.coherent_dma_mask = 0xFFFFFFFF; + pldat->pdev->dev.dma_mask = &pldat->pdev->dev.coherent_dma_mask; pldat->dma_buff_size = PAGE_ALIGN(pldat->dma_buff_size); /* Allocate a chunk of memory for the DMA ethernet buffers @@ -1488,7 +1508,7 @@ err_out_unregister_netdev: platform_set_drvdata(pdev, NULL); unregister_netdev(ndev); err_out_dma_unmap: - if (!use_iram_for_net() || + if (!use_iram_for_net(&pldat->pdev->dev) || pldat->dma_buff_size > lpc32xx_return_iram_size()) dma_free_coherent(&pldat->pdev->dev, pldat->dma_buff_size, pldat->dma_buff_base_v, @@ -1515,7 +1535,7 @@ static int lpc_eth_drv_remove(struct platform_device *pdev) unregister_netdev(ndev); platform_set_drvdata(pdev, NULL); - if (!use_iram_for_net() || + if (!use_iram_for_net(&pldat->pdev->dev) || pldat->dma_buff_size > lpc32xx_return_iram_size()) dma_free_coherent(&pldat->pdev->dev, pldat->dma_buff_size, pldat->dma_buff_base_v, @@ -1584,6 +1604,14 @@ static int lpc_eth_drv_resume(struct platform_device *pdev) } #endif +#ifdef CONFIG_OF +static const struct of_device_id lpc_eth_match[] = { + { .compatible = "nxp,lpc-eth" }, + { } +}; +MODULE_DEVICE_TABLE(of, lpc_eth_match); +#endif + static struct platform_driver lpc_eth_driver = { .probe = lpc_eth_drv_probe, .remove = __devexit_p(lpc_eth_drv_remove), @@ -1593,6 +1621,7 @@ static struct platform_driver lpc_eth_driver = { #endif .driver = { .name = MODNAME, + .of_match_table = of_match_ptr(lpc_eth_match), }, }; diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c index 0d725dc91bcb..8694124ef77d 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c @@ -1260,8 +1260,7 @@ next: void netxen_release_firmware(struct netxen_adapter *adapter) { - if (adapter->fw) - release_firmware(adapter->fw); + release_firmware(adapter->fw); adapter->fw = NULL; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c index d32cf0ddf1b9..799fd40ed03a 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c @@ -1321,8 +1321,7 @@ next: void qlcnic_release_firmware(struct qlcnic_adapter *adapter) { - if (adapter->fw) - release_firmware(adapter->fw); + release_firmware(adapter->fw); adapter->fw = NULL; } diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 4f74b9762c29..00b4f56a671c 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -6051,7 +6051,7 @@ static int rtl_open(struct net_device *dev) pm_runtime_get_sync(&pdev->dev); /* - * Rx and Tx desscriptors needs 256 bytes alignment. + * Rx and Tx descriptors needs 256 bytes alignment. * dma_alloc_coherent provides more. */ tp->TxDescArray = dma_alloc_coherent(&pdev->dev, R8169_TX_RING_BYTES, diff --git a/drivers/net/ethernet/s6gmac.c b/drivers/net/ethernet/s6gmac.c index 8e9fda0c7aeb..2ed3ab4b3c2d 100644 --- a/drivers/net/ethernet/s6gmac.c +++ b/drivers/net/ethernet/s6gmac.c @@ -1,7 +1,7 @@ /* * Ethernet driver for S6105 on chip network device * (c)2008 emlix GmbH http://www.emlix.com - * Authors: Oskar Schirmer <os@emlix.com> + * Authors: Oskar Schirmer <oskar@scara.com> * Daniel Gloeckner <dg@emlix.com> * * This program is free software; you can redistribute it and/or @@ -1070,4 +1070,4 @@ module_exit(s6gmac_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("S6105 on chip Ethernet driver"); -MODULE_AUTHOR("Oskar Schirmer <os@emlix.com>"); +MODULE_AUTHOR("Oskar Schirmer <oskar@scara.com>"); diff --git a/drivers/net/ethernet/tehuti/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c index 8846516678c3..447a6932cab3 100644 --- a/drivers/net/ethernet/tehuti/tehuti.c +++ b/drivers/net/ethernet/tehuti/tehuti.c @@ -341,8 +341,8 @@ static int bdx_fw_load(struct bdx_priv *priv) out: if (master) WRITE_REG(priv, regINIT_SEMAPHORE, 1); - if (fw) - release_firmware(fw); + + release_firmware(fw); if (rc) { netdev_err(priv->ndev, "firmware loading failed\n"); diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index 35758445297e..595205406d73 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -211,8 +211,8 @@ config KINGSUN_DONGLE kingsun-sir. config EP7211_DONGLE - tristate "EP7211 I/R support" - depends on IRTTY_SIR && ARCH_EP7211 && IRDA && EXPERIMENTAL + tristate "Cirrus Logic clps711x I/R support" + depends on IRTTY_SIR && ARCH_CLPS711X && IRDA && EXPERIMENTAL help Say Y here if you want to build support for the Cirrus logic EP7211 chipset's infrared module. @@ -316,7 +316,7 @@ config AU1000_FIR tristate "Alchemy IrDA SIR/FIR" depends on IRDA && MIPS_ALCHEMY help - Say Y/M here to build suppor the the IrDA peripheral on the + Say Y/M here to build support the IrDA peripheral on the Alchemy Au1000 and Au1100 SoCs. Say M to build a module; it will be called au1k_ir.ko diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c index 72f687b40d66..f9a86bdb12fa 100644 --- a/drivers/net/irda/irda-usb.c +++ b/drivers/net/irda/irda-usb.c @@ -1671,7 +1671,7 @@ static int irda_usb_probe(struct usb_interface *intf, /* Is this really necessary? (no, except maybe for broken devices) */ if (usb_reset_configuration (dev) < 0) { - err("reset_configuration failed"); + dev_err(&intf->dev, "reset_configuration failed\n"); ret = -EIO; goto err_out_3; } diff --git a/drivers/net/irda/kingsun-sir.c b/drivers/net/irda/kingsun-sir.c index 79aebeee928c..7b4833874ef5 100644 --- a/drivers/net/irda/kingsun-sir.c +++ b/drivers/net/irda/kingsun-sir.c @@ -134,14 +134,16 @@ static void kingsun_send_irq(struct urb *urb) /* in process of stopping, just drop data */ if (!netif_running(kingsun->netdev)) { - err("kingsun_send_irq: Network not running!"); + dev_err(&kingsun->usbdev->dev, + "kingsun_send_irq: Network not running!\n"); return; } /* unlink, shutdown, unplug, other nasties */ if (urb->status != 0) { - err("kingsun_send_irq: urb asynchronously failed - %d", - urb->status); + dev_err(&kingsun->usbdev->dev, + "kingsun_send_irq: urb asynchronously failed - %d\n", + urb->status); } netif_wake_queue(netdev); } @@ -177,7 +179,8 @@ static netdev_tx_t kingsun_hard_xmit(struct sk_buff *skb, kingsun, 1); if ((ret = usb_submit_urb(kingsun->tx_urb, GFP_ATOMIC))) { - err("kingsun_hard_xmit: failed tx_urb submit: %d", ret); + dev_err(&kingsun->usbdev->dev, + "kingsun_hard_xmit: failed tx_urb submit: %d\n", ret); switch (ret) { case -ENODEV: case -EPIPE: @@ -211,8 +214,9 @@ static void kingsun_rcv_irq(struct urb *urb) /* unlink, shutdown, unplug, other nasties */ if (urb->status != 0) { - err("kingsun_rcv_irq: urb asynchronously failed - %d", - urb->status); + dev_err(&kingsun->usbdev->dev, + "kingsun_rcv_irq: urb asynchronously failed - %d\n", + urb->status); kingsun->receiving = 0; return; } @@ -238,8 +242,9 @@ static void kingsun_rcv_irq(struct urb *urb) ? 1 : 0; } } else if (urb->actual_length > 0) { - err("%s(): Unexpected response length, expected %d got %d", - __func__, kingsun->max_rx, urb->actual_length); + dev_err(&kingsun->usbdev->dev, + "%s(): Unexpected response length, expected %d got %d\n", + __func__, kingsun->max_rx, urb->actual_length); } /* This urb has already been filled in kingsun_net_open */ ret = usb_submit_urb(urb, GFP_ATOMIC); @@ -286,7 +291,7 @@ static int kingsun_net_open(struct net_device *netdev) sprintf(hwname, "usb#%d", kingsun->usbdev->devnum); kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname); if (!kingsun->irlap) { - err("kingsun-sir: irlap_open failed"); + dev_err(&kingsun->usbdev->dev, "irlap_open failed\n"); goto free_mem; } @@ -298,7 +303,8 @@ static int kingsun_net_open(struct net_device *netdev) kingsun->rx_urb->status = 0; err = usb_submit_urb(kingsun->rx_urb, GFP_KERNEL); if (err) { - err("kingsun-sir: first urb-submit failed: %d", err); + dev_err(&kingsun->usbdev->dev, + "first urb-submit failed: %d\n", err); goto close_irlap; } @@ -446,13 +452,15 @@ static int kingsun_probe(struct usb_interface *intf, */ interface = intf->cur_altsetting; if (interface->desc.bNumEndpoints != 2) { - err("kingsun-sir: expected 2 endpoints, found %d", - interface->desc.bNumEndpoints); + dev_err(&intf->dev, + "kingsun-sir: expected 2 endpoints, found %d\n", + interface->desc.bNumEndpoints); return -ENODEV; } endpoint = &interface->endpoint[KINGSUN_EP_IN].desc; if (!usb_endpoint_is_int_in(endpoint)) { - err("kingsun-sir: endpoint 0 is not interrupt IN"); + dev_err(&intf->dev, + "kingsun-sir: endpoint 0 is not interrupt IN\n"); return -ENODEV; } @@ -460,14 +468,16 @@ static int kingsun_probe(struct usb_interface *intf, pipe = usb_rcvintpipe(dev, ep_in); maxp_in = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); if (maxp_in > 255 || maxp_in <= 1) { - err("%s: endpoint 0 has max packet size %d not in range", - __FILE__, maxp_in); + dev_err(&intf->dev, + "endpoint 0 has max packet size %d not in range\n", + maxp_in); return -ENODEV; } endpoint = &interface->endpoint[KINGSUN_EP_OUT].desc; if (!usb_endpoint_is_int_out(endpoint)) { - err("kingsun-sir: endpoint 1 is not interrupt OUT"); + dev_err(&intf->dev, + "kingsun-sir: endpoint 1 is not interrupt OUT\n"); return -ENODEV; } diff --git a/drivers/net/irda/ks959-sir.c b/drivers/net/irda/ks959-sir.c index abe689dffc72..824e2a93fe8a 100644 --- a/drivers/net/irda/ks959-sir.c +++ b/drivers/net/irda/ks959-sir.c @@ -247,8 +247,9 @@ static void ks959_speed_irq(struct urb *urb) { /* unlink, shutdown, unplug, other nasties */ if (urb->status != 0) { - err("ks959_speed_irq: urb asynchronously failed - %d", - urb->status); + dev_err(&urb->dev->dev, + "ks959_speed_irq: urb asynchronously failed - %d\n", + urb->status); } } @@ -332,14 +333,16 @@ static void ks959_send_irq(struct urb *urb) /* in process of stopping, just drop data */ if (!netif_running(kingsun->netdev)) { - err("ks959_send_irq: Network not running!"); + dev_err(&kingsun->usbdev->dev, + "ks959_send_irq: Network not running!\n"); return; } /* unlink, shutdown, unplug, other nasties */ if (urb->status != 0) { - err("ks959_send_irq: urb asynchronously failed - %d", - urb->status); + dev_err(&kingsun->usbdev->dev, + "ks959_send_irq: urb asynchronously failed - %d\n", + urb->status); return; } @@ -358,8 +361,9 @@ static void ks959_send_irq(struct urb *urb) if (kingsun->tx_buf_clear_used > 0) { /* There is more data to be sent */ if ((ret = ks959_submit_tx_fragment(kingsun)) != 0) { - err("ks959_send_irq: failed tx_urb submit: %d", - ret); + dev_err(&kingsun->usbdev->dev, + "ks959_send_irq: failed tx_urb submit: %d\n", + ret); switch (ret) { case -ENODEV: case -EPIPE: @@ -407,7 +411,8 @@ static netdev_tx_t ks959_hard_xmit(struct sk_buff *skb, kingsun->tx_buf_clear_used = wraplen; if ((ret = ks959_submit_tx_fragment(kingsun)) != 0) { - err("ks959_hard_xmit: failed tx_urb submit: %d", ret); + dev_err(&kingsun->usbdev->dev, + "ks959_hard_xmit: failed tx_urb submit: %d\n", ret); switch (ret) { case -ENODEV: case -EPIPE: @@ -442,8 +447,9 @@ static void ks959_rcv_irq(struct urb *urb) /* unlink, shutdown, unplug, other nasties */ if (urb->status != 0) { - err("kingsun_rcv_irq: urb asynchronously failed - %d", - urb->status); + dev_err(&kingsun->usbdev->dev, + "kingsun_rcv_irq: urb asynchronously failed - %d\n", + urb->status); kingsun->receiving = 0; return; } @@ -536,7 +542,7 @@ static int ks959_net_open(struct net_device *netdev) sprintf(hwname, "usb#%d", kingsun->usbdev->devnum); kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname); if (!kingsun->irlap) { - err("ks959-sir: irlap_open failed"); + dev_err(&kingsun->usbdev->dev, "irlap_open failed\n"); goto free_mem; } @@ -549,7 +555,8 @@ static int ks959_net_open(struct net_device *netdev) kingsun->rx_urb->status = 0; err = usb_submit_urb(kingsun->rx_urb, GFP_KERNEL); if (err) { - err("ks959-sir: first urb-submit failed: %d", err); + dev_err(&kingsun->usbdev->dev, + "first urb-submit failed: %d\n", err); goto close_irlap; } diff --git a/drivers/net/irda/ksdazzle-sir.c b/drivers/net/irda/ksdazzle-sir.c index f8c01088eeb7..5a278ab83c2f 100644 --- a/drivers/net/irda/ksdazzle-sir.c +++ b/drivers/net/irda/ksdazzle-sir.c @@ -168,10 +168,10 @@ struct ksdazzle_cb { static void ksdazzle_speed_irq(struct urb *urb) { /* unlink, shutdown, unplug, other nasties */ - if (urb->status != 0) { - err("ksdazzle_speed_irq: urb asynchronously failed - %d", - urb->status); - } + if (urb->status != 0) + dev_err(&urb->dev->dev, + "ksdazzle_speed_irq: urb asynchronously failed - %d\n", + urb->status); } /* Send a control request to change speed of the dongle */ @@ -245,14 +245,16 @@ static void ksdazzle_send_irq(struct urb *urb) /* in process of stopping, just drop data */ if (!netif_running(kingsun->netdev)) { - err("ksdazzle_send_irq: Network not running!"); + dev_err(&kingsun->usbdev->dev, + "ksdazzle_send_irq: Network not running!\n"); return; } /* unlink, shutdown, unplug, other nasties */ if (urb->status != 0) { - err("ksdazzle_send_irq: urb asynchronously failed - %d", - urb->status); + dev_err(&kingsun->usbdev->dev, + "ksdazzle_send_irq: urb asynchronously failed - %d\n", + urb->status); return; } @@ -271,7 +273,9 @@ static void ksdazzle_send_irq(struct urb *urb) if (kingsun->tx_buf_clear_used > 0) { /* There is more data to be sent */ if ((ret = ksdazzle_submit_tx_fragment(kingsun)) != 0) { - err("ksdazzle_send_irq: failed tx_urb submit: %d", ret); + dev_err(&kingsun->usbdev->dev, + "ksdazzle_send_irq: failed tx_urb submit: %d\n", + ret); switch (ret) { case -ENODEV: case -EPIPE: @@ -320,7 +324,8 @@ static netdev_tx_t ksdazzle_hard_xmit(struct sk_buff *skb, kingsun->tx_buf_clear_used = wraplen; if ((ret = ksdazzle_submit_tx_fragment(kingsun)) != 0) { - err("ksdazzle_hard_xmit: failed tx_urb submit: %d", ret); + dev_err(&kingsun->usbdev->dev, + "ksdazzle_hard_xmit: failed tx_urb submit: %d\n", ret); switch (ret) { case -ENODEV: case -EPIPE: @@ -355,8 +360,9 @@ static void ksdazzle_rcv_irq(struct urb *urb) /* unlink, shutdown, unplug, other nasties */ if (urb->status != 0) { - err("ksdazzle_rcv_irq: urb asynchronously failed - %d", - urb->status); + dev_err(&kingsun->usbdev->dev, + "ksdazzle_rcv_irq: urb asynchronously failed - %d\n", + urb->status); kingsun->receiving = 0; return; } @@ -430,7 +436,7 @@ static int ksdazzle_net_open(struct net_device *netdev) sprintf(hwname, "usb#%d", kingsun->usbdev->devnum); kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname); if (!kingsun->irlap) { - err("ksdazzle-sir: irlap_open failed"); + dev_err(&kingsun->usbdev->dev, "irlap_open failed\n"); goto free_mem; } @@ -442,7 +448,7 @@ static int ksdazzle_net_open(struct net_device *netdev) kingsun->rx_urb->status = 0; err = usb_submit_urb(kingsun->rx_urb, GFP_KERNEL); if (err) { - err("ksdazzle-sir: first urb-submit failed: %d", err); + dev_err(&kingsun->usbdev->dev, "first urb-submit failed: %d\n", err); goto close_irlap; } @@ -590,13 +596,14 @@ static int ksdazzle_probe(struct usb_interface *intf, */ interface = intf->cur_altsetting; if (interface->desc.bNumEndpoints != 2) { - err("ksdazzle: expected 2 endpoints, found %d", - interface->desc.bNumEndpoints); + dev_err(&intf->dev, "ksdazzle: expected 2 endpoints, found %d\n", + interface->desc.bNumEndpoints); return -ENODEV; } endpoint = &interface->endpoint[KINGSUN_EP_IN].desc; if (!usb_endpoint_is_int_in(endpoint)) { - err("ksdazzle: endpoint 0 is not interrupt IN"); + dev_err(&intf->dev, + "ksdazzle: endpoint 0 is not interrupt IN\n"); return -ENODEV; } @@ -604,13 +611,16 @@ static int ksdazzle_probe(struct usb_interface *intf, pipe = usb_rcvintpipe(dev, ep_in); maxp_in = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); if (maxp_in > 255 || maxp_in <= 1) { - err("ksdazzle: endpoint 0 has max packet size %d not in range [2..255]", maxp_in); + dev_err(&intf->dev, + "ksdazzle: endpoint 0 has max packet size %d not in range [2..255]\n", + maxp_in); return -ENODEV; } endpoint = &interface->endpoint[KINGSUN_EP_OUT].desc; if (!usb_endpoint_is_int_out(endpoint)) { - err("ksdazzle: endpoint 1 is not interrupt OUT"); + dev_err(&intf->dev, + "ksdazzle: endpoint 1 is not interrupt OUT\n"); return -ENODEV; } diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c index e6e59a078ef4..876e709b65ba 100644 --- a/drivers/net/irda/stir4200.c +++ b/drivers/net/irda/stir4200.c @@ -904,7 +904,7 @@ static int stir_net_open(struct net_device *netdev) sprintf(hwname, "usb#%d", stir->usbdev->devnum); stir->irlap = irlap_open(netdev, &stir->qos, hwname); if (!stir->irlap) { - err("stir4200: irlap_open failed"); + dev_err(&stir->usbdev->dev, "irlap_open failed\n"); goto err_out5; } @@ -913,7 +913,7 @@ static int stir_net_open(struct net_device *netdev) "%s", stir->netdev->name); if (IS_ERR(stir->thread)) { err = PTR_ERR(stir->thread); - err("stir4200: unable to start kernel thread"); + dev_err(&stir->usbdev->dev, "unable to start kernel thread\n"); goto err_out6; } @@ -1042,7 +1042,7 @@ static int stir_probe(struct usb_interface *intf, ret = usb_reset_configuration(dev); if (ret != 0) { - err("stir4200: usb reset configuration failed"); + dev_err(&intf->dev, "usb reset configuration failed\n"); goto err_out2; } diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index 42b5151aa78a..71e2b0523bc2 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -1647,6 +1647,7 @@ static struct usb_driver asix_driver = { .resume = usbnet_resume, .disconnect = usbnet_disconnect, .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(asix_driver); diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c index 182cfb4aeb1d..26c5bebd9eca 100644 --- a/drivers/net/usb/catc.c +++ b/drivers/net/usb/catc.c @@ -338,16 +338,18 @@ static void catc_irq_done(struct urb *urb) } else { catc->rx_urb->dev = catc->usbdev; if ((res = usb_submit_urb(catc->rx_urb, GFP_ATOMIC)) < 0) { - err("submit(rx_urb) status %d", res); + dev_err(&catc->usbdev->dev, + "submit(rx_urb) status %d\n", res); } } } resubmit: res = usb_submit_urb (urb, GFP_ATOMIC); if (res) - err ("can't resubmit intr, %s-%s, status %d", - catc->usbdev->bus->bus_name, - catc->usbdev->devpath, res); + dev_err(&catc->usbdev->dev, + "can't resubmit intr, %s-%s, status %d\n", + catc->usbdev->bus->bus_name, + catc->usbdev->devpath, res); } /* @@ -366,7 +368,8 @@ static int catc_tx_run(struct catc *catc) catc->tx_urb->dev = catc->usbdev; if ((status = usb_submit_urb(catc->tx_urb, GFP_ATOMIC)) < 0) - err("submit(tx_urb), status %d", status); + dev_err(&catc->usbdev->dev, "submit(tx_urb), status %d\n", + status); catc->tx_idx = !catc->tx_idx; catc->tx_ptr = 0; @@ -496,7 +499,8 @@ static void catc_ctrl_run(struct catc *catc) memcpy(catc->ctrl_buf, q->buf, q->len); if ((status = usb_submit_urb(catc->ctrl_urb, GFP_ATOMIC))) - err("submit(ctrl_urb) status %d", status); + dev_err(&catc->usbdev->dev, "submit(ctrl_urb) status %d\n", + status); } static void catc_ctrl_done(struct urb *urb) @@ -555,7 +559,7 @@ static int catc_ctrl_async(struct catc *catc, u8 dir, u8 request, u16 value, catc->ctrl_head = (catc->ctrl_head + 1) & (CTRL_QUEUE - 1); if (catc->ctrl_head == catc->ctrl_tail) { - err("ctrl queue full"); + dev_err(&catc->usbdev->dev, "ctrl queue full\n"); catc->ctrl_tail = (catc->ctrl_tail + 1) & (CTRL_QUEUE - 1); retval = -1; } @@ -714,7 +718,8 @@ static int catc_open(struct net_device *netdev) catc->irq_urb->dev = catc->usbdev; if ((status = usb_submit_urb(catc->irq_urb, GFP_KERNEL)) < 0) { - err("submit(irq_urb) status %d", status); + dev_err(&catc->usbdev->dev, "submit(irq_urb) status %d\n", + status); return -1; } @@ -769,7 +774,7 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id if (usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 1)) { - err("Can't set altsetting 1."); + dev_err(&intf->dev, "Can't set altsetting 1.\n"); return -EIO; } @@ -799,7 +804,7 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id catc->irq_urb = usb_alloc_urb(0, GFP_KERNEL); if ((!catc->ctrl_urb) || (!catc->tx_urb) || (!catc->rx_urb) || (!catc->irq_urb)) { - err("No free urbs available."); + dev_err(&intf->dev, "No free urbs available.\n"); usb_free_urb(catc->ctrl_urb); usb_free_urb(catc->tx_urb); usb_free_urb(catc->rx_urb); @@ -947,6 +952,7 @@ static struct usb_driver catc_driver = { .probe = catc_probe, .disconnect = catc_disconnect, .id_table = catc_id_table, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(catc_driver); diff --git a/drivers/net/usb/cdc-phonet.c b/drivers/net/usb/cdc-phonet.c index 3e41b00c6806..d848d4dd5754 100644 --- a/drivers/net/usb/cdc-phonet.c +++ b/drivers/net/usb/cdc-phonet.c @@ -457,6 +457,7 @@ static struct usb_driver usbpn_driver = { .probe = usbpn_probe, .disconnect = usbpn_disconnect, .id_table = usbpn_ids, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(usbpn_driver); diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c index 685a4e22c768..434d5af8e6fb 100644 --- a/drivers/net/usb/cdc_eem.c +++ b/drivers/net/usb/cdc_eem.c @@ -368,6 +368,7 @@ static struct usb_driver eem_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(eem_driver); diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index fffee6aee8bb..a03de7197049 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -705,6 +705,7 @@ static struct usb_driver cdc_driver = { .resume = usbnet_resume, .reset_resume = usbnet_resume, .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(cdc_driver); diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 7adc9f6b0ea1..4b9513fcf275 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -1212,6 +1212,7 @@ static struct usb_driver cdc_ncm_driver = { .resume = usbnet_resume, .reset_resume = usbnet_resume, .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, }; static const struct ethtool_ops cdc_ncm_ethtool_ops = { diff --git a/drivers/net/usb/cdc_subset.c b/drivers/net/usb/cdc_subset.c index b403d934e4e3..0d1fe89ae0bd 100644 --- a/drivers/net/usb/cdc_subset.c +++ b/drivers/net/usb/cdc_subset.c @@ -336,6 +336,7 @@ static struct usb_driver cdc_subset_driver = { .resume = usbnet_resume, .disconnect = usbnet_disconnect, .id_table = products, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(cdc_subset_driver); diff --git a/drivers/net/usb/cx82310_eth.c b/drivers/net/usb/cx82310_eth.c index 0e0531356e62..49ab45e17fe8 100644 --- a/drivers/net/usb/cx82310_eth.c +++ b/drivers/net/usb/cx82310_eth.c @@ -327,6 +327,7 @@ static struct usb_driver cx82310_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(cx82310_driver); diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index b97226318ea5..e0433ce6ced7 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -670,6 +670,7 @@ static struct usb_driver dm9601_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(dm9601_driver); diff --git a/drivers/net/usb/gl620a.c b/drivers/net/usb/gl620a.c index 38266bdae26b..db3c8021f2a3 100644 --- a/drivers/net/usb/gl620a.c +++ b/drivers/net/usb/gl620a.c @@ -225,6 +225,7 @@ static struct usb_driver gl620a_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(gl620a_driver); diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 2d2a6882ba33..62f30b46fa42 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -106,13 +106,6 @@ #define MAX_RX_URBS 2 -static inline struct hso_serial *get_serial_by_tty(struct tty_struct *tty) -{ - if (tty) - return tty->driver_data; - return NULL; -} - /*****************************************************************************/ /* Debugging functions */ /*****************************************************************************/ @@ -255,9 +248,8 @@ struct hso_serial { u8 dtr_state; unsigned tx_urb_used:1; + struct tty_port port; /* from usb_serial_port */ - struct tty_struct *tty; - int open_count; spinlock_t serial_lock; int (*write_data) (struct hso_serial *serial); @@ -1114,7 +1106,7 @@ static void hso_init_termios(struct ktermios *termios) static void _hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old) { - struct hso_serial *serial = get_serial_by_tty(tty); + struct hso_serial *serial = tty->driver_data; struct ktermios *termios; if (!serial) { @@ -1190,7 +1182,7 @@ static void put_rxbuf_data_and_resubmit_ctrl_urb(struct hso_serial *serial) struct urb *urb; urb = serial->rx_urb[0]; - if (serial->open_count > 0) { + if (serial->port.count > 0) { count = put_rxbuf_data(urb, serial); if (count == -1) return; @@ -1226,7 +1218,7 @@ static void hso_std_serial_read_bulk_callback(struct urb *urb) DUMP1(urb->transfer_buffer, urb->actual_length); /* Anyone listening? */ - if (serial->open_count == 0) + if (serial->port.count == 0) return; if (status == 0) { @@ -1268,7 +1260,7 @@ static void hso_unthrottle_tasklet(struct hso_serial *serial) static void hso_unthrottle(struct tty_struct *tty) { - struct hso_serial *serial = get_serial_by_tty(tty); + struct hso_serial *serial = tty->driver_data; tasklet_hi_schedule(&serial->unthrottle_tasklet); } @@ -1304,15 +1296,12 @@ static int hso_serial_open(struct tty_struct *tty, struct file *filp) kref_get(&serial->parent->ref); /* setup */ - spin_lock_irq(&serial->serial_lock); tty->driver_data = serial; - tty_kref_put(serial->tty); - serial->tty = tty_kref_get(tty); - spin_unlock_irq(&serial->serial_lock); + tty_port_tty_set(&serial->port, tty); /* check for port already opened, if not set the termios */ - serial->open_count++; - if (serial->open_count == 1) { + serial->port.count++; + if (serial->port.count == 1) { serial->rx_state = RX_IDLE; /* Force default termio settings */ _hso_serial_set_termios(tty, NULL); @@ -1324,7 +1313,7 @@ static int hso_serial_open(struct tty_struct *tty, struct file *filp) result = hso_start_serial_device(serial->parent, GFP_KERNEL); if (result) { hso_stop_serial_device(serial->parent); - serial->open_count--; + serial->port.count--; kref_put(&serial->parent->ref, hso_serial_ref_free); } } else { @@ -1361,17 +1350,11 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp) /* reset the rts and dtr */ /* do the actual close */ - serial->open_count--; + serial->port.count--; - if (serial->open_count <= 0) { - serial->open_count = 0; - spin_lock_irq(&serial->serial_lock); - if (serial->tty == tty) { - serial->tty->driver_data = NULL; - serial->tty = NULL; - tty_kref_put(tty); - } - spin_unlock_irq(&serial->serial_lock); + if (serial->port.count <= 0) { + serial->port.count = 0; + tty_port_tty_set(&serial->port, NULL); if (!usb_gone) hso_stop_serial_device(serial->parent); tasklet_kill(&serial->unthrottle_tasklet); @@ -1390,7 +1373,7 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp) static int hso_serial_write(struct tty_struct *tty, const unsigned char *buf, int count) { - struct hso_serial *serial = get_serial_by_tty(tty); + struct hso_serial *serial = tty->driver_data; int space, tx_bytes; unsigned long flags; @@ -1422,7 +1405,7 @@ out: /* how much room is there for writing */ static int hso_serial_write_room(struct tty_struct *tty) { - struct hso_serial *serial = get_serial_by_tty(tty); + struct hso_serial *serial = tty->driver_data; int room; unsigned long flags; @@ -1437,7 +1420,7 @@ static int hso_serial_write_room(struct tty_struct *tty) /* setup the term */ static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old) { - struct hso_serial *serial = get_serial_by_tty(tty); + struct hso_serial *serial = tty->driver_data; unsigned long flags; if (old) @@ -1446,7 +1429,7 @@ static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old) /* the actual setup */ spin_lock_irqsave(&serial->serial_lock, flags); - if (serial->open_count) + if (serial->port.count) _hso_serial_set_termios(tty, old); else tty->termios = old; @@ -1458,7 +1441,7 @@ static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old) /* how many characters in the buffer */ static int hso_serial_chars_in_buffer(struct tty_struct *tty) { - struct hso_serial *serial = get_serial_by_tty(tty); + struct hso_serial *serial = tty->driver_data; int chars; unsigned long flags; @@ -1629,7 +1612,7 @@ static int hso_get_count(struct tty_struct *tty, struct serial_icounter_struct *icount) { struct uart_icount cnow; - struct hso_serial *serial = get_serial_by_tty(tty); + struct hso_serial *serial = tty->driver_data; struct hso_tiocmget *tiocmget = serial->tiocmget; memset(icount, 0, sizeof(struct serial_icounter_struct)); @@ -1659,7 +1642,7 @@ static int hso_get_count(struct tty_struct *tty, static int hso_serial_tiocmget(struct tty_struct *tty) { int retval; - struct hso_serial *serial = get_serial_by_tty(tty); + struct hso_serial *serial = tty->driver_data; struct hso_tiocmget *tiocmget; u16 UART_state_bitmap; @@ -1693,7 +1676,7 @@ static int hso_serial_tiocmset(struct tty_struct *tty, int val = 0; unsigned long flags; int if_num; - struct hso_serial *serial = get_serial_by_tty(tty); + struct hso_serial *serial = tty->driver_data; /* sanity check */ if (!serial) { @@ -1733,7 +1716,7 @@ static int hso_serial_tiocmset(struct tty_struct *tty, static int hso_serial_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { - struct hso_serial *serial = get_serial_by_tty(tty); + struct hso_serial *serial = tty->driver_data; int ret = 0; D4("IOCTL cmd: %d, arg: %ld", cmd, arg); @@ -1905,7 +1888,7 @@ static void intr_callback(struct urb *urb) D1("Pending read interrupt on port %d\n", i); spin_lock(&serial->serial_lock); if (serial->rx_state == RX_IDLE && - serial->open_count > 0) { + serial->port.count > 0) { /* Setup and send a ctrl req read on * port i */ if (!serial->rx_urb_filled[0]) { @@ -1954,14 +1937,13 @@ static void hso_std_serial_write_bulk_callback(struct urb *urb) spin_lock(&serial->serial_lock); serial->tx_urb_used = 0; - tty = tty_kref_get(serial->tty); spin_unlock(&serial->serial_lock); if (status) { handle_usb_error(status, __func__, serial->parent); - tty_kref_put(tty); return; } hso_put_activity(serial->parent); + tty = tty_port_tty_get(&serial->port); if (tty) { tty_wakeup(tty); tty_kref_put(tty); @@ -2001,7 +1983,6 @@ static void ctrl_callback(struct urb *urb) struct hso_serial *serial = urb->context; struct usb_ctrlrequest *req; int status = urb->status; - struct tty_struct *tty; /* sanity check */ if (!serial) @@ -2009,11 +1990,9 @@ static void ctrl_callback(struct urb *urb) spin_lock(&serial->serial_lock); serial->tx_urb_used = 0; - tty = tty_kref_get(serial->tty); spin_unlock(&serial->serial_lock); if (status) { handle_usb_error(status, __func__, serial->parent); - tty_kref_put(tty); return; } @@ -2031,13 +2010,15 @@ static void ctrl_callback(struct urb *urb) put_rxbuf_data_and_resubmit_ctrl_urb(serial); spin_unlock(&serial->serial_lock); } else { + struct tty_struct *tty = tty_port_tty_get(&serial->port); hso_put_activity(serial->parent); - if (tty) + if (tty) { tty_wakeup(tty); + tty_kref_put(tty); + } /* response to a write command */ hso_kick_transmit(serial); } - tty_kref_put(tty); } /* handle RX data for serial port */ @@ -2053,8 +2034,7 @@ static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial) return -2; } - /* All callers to put_rxbuf_data hold serial_lock */ - tty = tty_kref_get(serial->tty); + tty = tty_port_tty_get(&serial->port); /* Push data to tty */ if (tty) { @@ -2074,12 +2054,12 @@ static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial) write_length_remaining -= curr_write_len; tty_flip_buffer_push(tty); } + tty_kref_put(tty); } if (write_length_remaining == 0) { serial->curr_rx_urb_offset = 0; serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0; } - tty_kref_put(tty); return write_length_remaining; } @@ -2320,6 +2300,7 @@ static int hso_serial_common_create(struct hso_serial *serial, int num_urbs, serial->minor = minor; serial->magic = HSO_SERIAL_MAGIC; spin_lock_init(&serial->serial_lock); + tty_port_init(&serial->port); serial->num_rx_urbs = num_urbs; /* RX, allocate urb and initialize */ @@ -3098,7 +3079,7 @@ static int hso_resume(struct usb_interface *iface) /* Start all serial ports */ for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) { if (serial_table[i] && (serial_table[i]->interface == iface)) { - if (dev2ser(serial_table[i])->open_count) { + if (dev2ser(serial_table[i])->port.count) { result = hso_start_serial_device(serial_table[i], GFP_NOIO); hso_kick_transmit(dev2ser(serial_table[i])); @@ -3172,13 +3153,12 @@ static void hso_free_interface(struct usb_interface *interface) if (serial_table[i] && (serial_table[i]->interface == interface)) { hso_dev = dev2ser(serial_table[i]); - spin_lock_irq(&hso_dev->serial_lock); - tty = tty_kref_get(hso_dev->tty); - spin_unlock_irq(&hso_dev->serial_lock); - if (tty) + tty = tty_port_tty_get(&hso_dev->port); + if (tty) { tty_hangup(tty); + tty_kref_put(tty); + } mutex_lock(&hso_dev->parent->mutex); - tty_kref_put(tty); hso_dev->parent->usb_gone = 1; mutex_unlock(&hso_dev->parent->mutex); kref_put(&serial_table[i]->ref, hso_serial_ref_free); @@ -3291,6 +3271,7 @@ static struct usb_driver hso_driver = { .resume = hso_resume, .reset_resume = hso_resume, .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, }; static int __init hso_init(void) @@ -3312,7 +3293,6 @@ static int __init hso_init(void) return -ENOMEM; /* fill in all needed values */ - tty_drv->magic = TTY_DRIVER_MAGIC; tty_drv->driver_name = driver_name; tty_drv->name = tty_filename; @@ -3333,7 +3313,7 @@ static int __init hso_init(void) if (result) { printk(KERN_ERR "%s - tty_register_driver failed(%d)\n", __func__, result); - return result; + goto err_free_tty; } /* register this module as an usb driver */ @@ -3341,13 +3321,16 @@ static int __init hso_init(void) if (result) { printk(KERN_ERR "Could not register hso driver? error: %d\n", result); - /* cleanup serial interface */ - tty_unregister_driver(tty_drv); - return result; + goto err_unreg_tty; } /* done */ return 0; +err_unreg_tty: + tty_unregister_driver(tty_drv); +err_free_tty: + put_tty_driver(tty_drv); + return result; } static void __exit hso_exit(void) @@ -3355,6 +3338,7 @@ static void __exit hso_exit(void) printk(KERN_INFO "hso: unloaded\n"); tty_unregister_driver(tty_drv); + put_tty_driver(tty_drv); /* deregister the usb driver */ usb_deregister(&hso_driver); } diff --git a/drivers/net/usb/int51x1.c b/drivers/net/usb/int51x1.c index 12a22a453ff1..8de641713d5f 100644 --- a/drivers/net/usb/int51x1.c +++ b/drivers/net/usb/int51x1.c @@ -236,6 +236,7 @@ static struct usb_driver int51x1_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(int51x1_driver); diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c index dd78c4cbd459..964031e3da87 100644 --- a/drivers/net/usb/ipheth.c +++ b/drivers/net/usb/ipheth.c @@ -209,7 +209,8 @@ static void ipheth_rcvbulk_callback(struct urb *urb) case 0: break; default: - err("%s: urb status: %d", __func__, status); + dev_err(&dev->intf->dev, "%s: urb status: %d\n", + __func__, status); return; } @@ -222,7 +223,8 @@ static void ipheth_rcvbulk_callback(struct urb *urb) skb = dev_alloc_skb(len); if (!skb) { - err("%s: dev_alloc_skb: -ENOMEM", __func__); + dev_err(&dev->intf->dev, "%s: dev_alloc_skb: -ENOMEM\n", + __func__); dev->net->stats.rx_dropped++; return; } @@ -251,7 +253,8 @@ static void ipheth_sndbulk_callback(struct urb *urb) status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN) - err("%s: urb status: %d", __func__, status); + dev_err(&dev->intf->dev, "%s: urb status: %d\n", + __func__, status); dev_kfree_skb_irq(dev->tx_skb); netif_wake_queue(dev->net); @@ -271,7 +274,8 @@ static int ipheth_carrier_set(struct ipheth_device *dev) dev->ctrl_buf, IPHETH_CTRL_BUF_SIZE, IPHETH_CTRL_TIMEOUT); if (retval < 0) { - err("%s: usb_control_msg: %d", __func__, retval); + dev_err(&dev->intf->dev, "%s: usb_control_msg: %d\n", + __func__, retval); return retval; } @@ -308,9 +312,11 @@ static int ipheth_get_macaddr(struct ipheth_device *dev) IPHETH_CTRL_BUF_SIZE, IPHETH_CTRL_TIMEOUT); if (retval < 0) { - err("%s: usb_control_msg: %d", __func__, retval); + dev_err(&dev->intf->dev, "%s: usb_control_msg: %d\n", + __func__, retval); } else if (retval < ETH_ALEN) { - err("%s: usb_control_msg: short packet: %d bytes", + dev_err(&dev->intf->dev, + "%s: usb_control_msg: short packet: %d bytes\n", __func__, retval); retval = -EINVAL; } else { @@ -335,7 +341,8 @@ static int ipheth_rx_submit(struct ipheth_device *dev, gfp_t mem_flags) retval = usb_submit_urb(dev->rx_urb, mem_flags); if (retval) - err("%s: usb_submit_urb: %d", __func__, retval); + dev_err(&dev->intf->dev, "%s: usb_submit_urb: %d\n", + __func__, retval); return retval; } @@ -396,7 +403,8 @@ static int ipheth_tx(struct sk_buff *skb, struct net_device *net) retval = usb_submit_urb(dev->tx_urb, GFP_ATOMIC); if (retval) { - err("%s: usb_submit_urb: %d", __func__, retval); + dev_err(&dev->intf->dev, "%s: usb_submit_urb: %d\n", + __func__, retval); dev->net->stats.tx_errors++; dev_kfree_skb_irq(skb); } else { @@ -414,7 +422,7 @@ static void ipheth_tx_timeout(struct net_device *net) { struct ipheth_device *dev = netdev_priv(net); - err("%s: TX timeout", __func__); + dev_err(&dev->intf->dev, "%s: TX timeout\n", __func__); dev->net->stats.tx_errors++; usb_unlink_urb(dev->tx_urb); } @@ -464,7 +472,7 @@ static int ipheth_probe(struct usb_interface *intf, hintf = usb_altnum_to_altsetting(intf, IPHETH_ALT_INTFNUM); if (hintf == NULL) { retval = -ENODEV; - err("Unable to find alternate settings interface"); + dev_err(&intf->dev, "Unable to find alternate settings interface\n"); goto err_endpoints; } @@ -477,7 +485,7 @@ static int ipheth_probe(struct usb_interface *intf, } if (!(dev->bulk_in && dev->bulk_out)) { retval = -ENODEV; - err("Unable to find endpoints"); + dev_err(&intf->dev, "Unable to find endpoints\n"); goto err_endpoints; } @@ -495,7 +503,7 @@ static int ipheth_probe(struct usb_interface *intf, retval = ipheth_alloc_urbs(dev); if (retval) { - err("error allocating urbs: %d", retval); + dev_err(&intf->dev, "error allocating urbs: %d\n", retval); goto err_alloc_urbs; } @@ -506,7 +514,7 @@ static int ipheth_probe(struct usb_interface *intf, retval = register_netdev(netdev); if (retval) { - err("error registering netdev: %d", retval); + dev_err(&intf->dev, "error registering netdev: %d\n", retval); retval = -EIO; goto err_register_netdev; } @@ -546,6 +554,7 @@ static struct usb_driver ipheth_driver = { .probe = ipheth_probe, .disconnect = ipheth_disconnect, .id_table = ipheth_table, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(ipheth_driver); diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c index 7562649b3d6b..92c49e0a59ec 100644 --- a/drivers/net/usb/kalmia.c +++ b/drivers/net/usb/kalmia.c @@ -372,7 +372,8 @@ static struct usb_driver kalmia_driver = { .probe = usbnet_probe, .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, - .resume = usbnet_resume + .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(kalmia_driver); diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c index df2a2cf35a99..d8ad55284389 100644 --- a/drivers/net/usb/kaweth.c +++ b/drivers/net/usb/kaweth.c @@ -179,6 +179,7 @@ static struct usb_driver kaweth_driver = { .resume = kaweth_resume, .id_table = usb_klsi_table, .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, }; typedef __u8 eth_addr_t[6]; @@ -400,12 +401,13 @@ static int kaweth_download_firmware(struct kaweth_device *kaweth, ret = request_firmware(&fw, fwname, &kaweth->dev->dev); if (ret) { - err("Firmware request failed\n"); + dev_err(&kaweth->intf->dev, "Firmware request failed\n"); return ret; } if (fw->size > KAWETH_FIRMWARE_BUF_SIZE) { - err("Firmware too big: %zu", fw->size); + dev_err(&kaweth->intf->dev, "Firmware too big: %zu\n", + fw->size); release_firmware(fw); return -ENOSPC; } @@ -501,9 +503,10 @@ static void kaweth_resubmit_int_urb(struct kaweth_device *kaweth, gfp_t mf) } if (status) - err ("can't resubmit intr, %s-%s, status %d", - kaweth->dev->bus->bus_name, - kaweth->dev->devpath, status); + dev_err(&kaweth->intf->dev, + "can't resubmit intr, %s-%s, status %d\n", + kaweth->dev->bus->bus_name, + kaweth->dev->devpath, status); } static void int_callback(struct urb *u) @@ -576,7 +579,8 @@ static int kaweth_resubmit_rx_urb(struct kaweth_device *kaweth, kaweth->suspend_lowmem_rx = 1; schedule_delayed_work(&kaweth->lowmem_work, HZ/4); } - err("resubmitting rx_urb %d failed", result); + dev_err(&kaweth->intf->dev, "resubmitting rx_urb %d failed\n", + result); } else { kaweth->suspend_lowmem_rx = 0; } @@ -634,20 +638,21 @@ static void kaweth_usb_receive(struct urb *urb) spin_unlock(&kaweth->device_lock); if(status && status != -EREMOTEIO && count != 1) { - err("%s RX status: %d count: %d packet_len: %d", - net->name, - status, - count, - (int)pkt_len); + dev_err(&kaweth->intf->dev, + "%s RX status: %d count: %d packet_len: %d\n", + net->name, status, count, (int)pkt_len); kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC); return; } if(kaweth->net && (count > 2)) { if(pkt_len > (count - 2)) { - err("Packet length too long for USB frame (pkt_len: %x, count: %x)",pkt_len, count); - err("Packet len & 2047: %x", pkt_len & 2047); - err("Count 2: %x", count2); + dev_err(&kaweth->intf->dev, + "Packet length too long for USB frame (pkt_len: %x, count: %x)\n", + pkt_len, count); + dev_err(&kaweth->intf->dev, "Packet len & 2047: %x\n", + pkt_len & 2047); + dev_err(&kaweth->intf->dev, "Count 2: %x\n", count2); kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC); return; } @@ -686,7 +691,7 @@ static int kaweth_open(struct net_device *net) res = usb_autopm_get_interface(kaweth->intf); if (res) { - err("Interface cannot be resumed."); + dev_err(&kaweth->intf->dev, "Interface cannot be resumed.\n"); return -EIO; } res = kaweth_resubmit_rx_urb(kaweth, GFP_KERNEL); @@ -907,7 +912,8 @@ static void kaweth_async_set_rx_mode(struct kaweth_device *kaweth) KAWETH_CONTROL_TIMEOUT); if(result < 0) { - err("Failed to set Rx mode: %d", result); + dev_err(&kaweth->intf->dev, "Failed to set Rx mode: %d\n", + result); } else { dbg("Set Rx mode to %d", packet_filter_bitmap); @@ -1045,7 +1051,8 @@ static int kaweth_probe( "kaweth/new_code.bin", 100, 2)) < 0) { - err("Error downloading firmware (%d)", result); + dev_err(&intf->dev, "Error downloading firmware (%d)\n", + result); goto err_fw; } @@ -1053,7 +1060,9 @@ static int kaweth_probe( "kaweth/new_code_fix.bin", 100, 3)) < 0) { - err("Error downloading firmware fix (%d)", result); + dev_err(&intf->dev, + "Error downloading firmware fix (%d)\n", + result); goto err_fw; } @@ -1061,7 +1070,9 @@ static int kaweth_probe( "kaweth/trigger_code.bin", 126, 2)) < 0) { - err("Error downloading trigger code (%d)", result); + dev_err(&intf->dev, + "Error downloading trigger code (%d)\n", + result); goto err_fw; } @@ -1070,13 +1081,14 @@ static int kaweth_probe( "kaweth/trigger_code_fix.bin", 126, 3)) < 0) { - err("Error downloading trigger code fix (%d)", result); + dev_err(&intf->dev, "Error downloading trigger code fix (%d)\n", result); goto err_fw; } if ((result = kaweth_trigger_firmware(kaweth, 126)) < 0) { - err("Error triggering firmware (%d)", result); + dev_err(&intf->dev, "Error triggering firmware (%d)\n", + result); goto err_fw; } @@ -1091,7 +1103,7 @@ err_fw: result = kaweth_read_configuration(kaweth); if(result < 0) { - err("Error reading configuration (%d), no net device created", result); + dev_err(&intf->dev, "Error reading configuration (%d), no net device created\n", result); goto err_free_netdev; } @@ -1103,7 +1115,7 @@ err_fw: if(!memcmp(&kaweth->configuration.hw_addr, &bcast_addr, sizeof(bcast_addr))) { - err("Firmware not functioning properly, no net device created"); + dev_err(&intf->dev, "Firmware not functioning properly, no net device created\n"); goto err_free_netdev; } @@ -1113,7 +1125,7 @@ err_fw: } if(kaweth_set_sofs_wait(kaweth, KAWETH_SOFS_TO_WAIT) < 0) { - err("Error setting SOFS wait"); + dev_err(&intf->dev, "Error setting SOFS wait\n"); goto err_free_netdev; } @@ -1123,7 +1135,7 @@ err_fw: KAWETH_PACKET_FILTER_MULTICAST); if(result < 0) { - err("Error setting receive filter"); + dev_err(&intf->dev, "Error setting receive filter\n"); goto err_free_netdev; } @@ -1175,7 +1187,7 @@ err_fw: SET_NETDEV_DEV(netdev, &intf->dev); if (register_netdev(netdev) != 0) { - err("Error registering netdev."); + dev_err(&intf->dev, "Error registering netdev.\n"); goto err_intfdata; } diff --git a/drivers/net/usb/lg-vl600.c b/drivers/net/usb/lg-vl600.c index 45a981fde43f..808d6506da41 100644 --- a/drivers/net/usb/lg-vl600.c +++ b/drivers/net/usb/lg-vl600.c @@ -344,6 +344,7 @@ static struct usb_driver lg_vl600_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(lg_vl600_driver); diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c index c434b6ba0337..add1064f755d 100644 --- a/drivers/net/usb/mcs7830.c +++ b/drivers/net/usb/mcs7830.c @@ -690,6 +690,7 @@ static struct usb_driver mcs7830_driver = { .suspend = usbnet_suspend, .resume = usbnet_resume, .reset_resume = mcs7830_reset_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(mcs7830_driver); diff --git a/drivers/net/usb/net1080.c b/drivers/net/usb/net1080.c index 83f965cb69e7..28c4d513ba85 100644 --- a/drivers/net/usb/net1080.c +++ b/drivers/net/usb/net1080.c @@ -587,6 +587,7 @@ static struct usb_driver net1080_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(net1080_driver); diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index 752393092325..7023220456c5 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -1489,6 +1489,7 @@ static struct usb_driver pegasus_driver = { .id_table = pegasus_ids, .suspend = pegasus_suspend, .resume = pegasus_resume, + .disable_hub_initiated_lpm = 1, }; static void __init parse_id(char *id) diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c index b2b035e29978..4584b9a805b3 100644 --- a/drivers/net/usb/plusb.c +++ b/drivers/net/usb/plusb.c @@ -152,6 +152,7 @@ static struct usb_driver plusb_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(plusb_driver); diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 63cfd0b2c31a..380dbea6109d 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -560,6 +560,7 @@ static struct usb_driver qmi_wwan_driver = { .resume = qmi_wwan_resume, .reset_resume = qmi_wwan_resume, .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, }; static int __init qmi_wwan_init(void) diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c index 0d746b3fdef1..4a4335833c36 100644 --- a/drivers/net/usb/rndis_host.c +++ b/drivers/net/usb/rndis_host.c @@ -638,6 +638,7 @@ static struct usb_driver rndis_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(rndis_driver); diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c index d363b31053da..0e2c92e0e532 100644 --- a/drivers/net/usb/rtl8150.c +++ b/drivers/net/usb/rtl8150.c @@ -203,7 +203,8 @@ static int async_set_registers(rtl8150_t * dev, u16 indx, u16 size) if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) { if (ret == -ENODEV) netif_device_detach(dev->netdev); - err("control request submission failed: %d", ret); + dev_err(&dev->udev->dev, + "control request submission failed: %d\n", ret); } else set_bit(RX_REG_SET, &dev->flags); @@ -516,9 +517,9 @@ resubmit: if (res == -ENODEV) netif_device_detach(dev->netdev); else if (res) - err ("can't resubmit intr, %s-%s/input0, status %d", - dev->udev->bus->bus_name, - dev->udev->devpath, res); + dev_err(&dev->udev->dev, + "can't resubmit intr, %s-%s/input0, status %d\n", + dev->udev->bus->bus_name, dev->udev->devpath, res); } static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message) @@ -890,11 +891,11 @@ static int rtl8150_probe(struct usb_interface *intf, dev->intr_interval = 100; /* 100ms */ if (!alloc_all_urbs(dev)) { - err("out of memory"); + dev_err(&intf->dev, "out of memory\n"); goto out; } if (!rtl8150_reset(dev)) { - err("couldn't reset the device"); + dev_err(&intf->dev, "couldn't reset the device\n"); goto out1; } fill_skb_pool(dev); @@ -903,7 +904,7 @@ static int rtl8150_probe(struct usb_interface *intf, usb_set_intfdata(intf, dev); SET_NETDEV_DEV(netdev, &intf->dev); if (register_netdev(netdev) != 0) { - err("couldn't register the device"); + dev_err(&intf->dev, "couldn't register the device\n"); goto out2; } @@ -947,7 +948,8 @@ static struct usb_driver rtl8150_driver = { .disconnect = rtl8150_disconnect, .id_table = rtl8150_table, .suspend = rtl8150_suspend, - .resume = rtl8150_resume + .resume = rtl8150_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(rtl8150_driver); diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c index b59cf20c7817..3faef5670d1f 100644 --- a/drivers/net/usb/sierra_net.c +++ b/drivers/net/usb/sierra_net.c @@ -982,6 +982,7 @@ static struct usb_driver sierra_net_driver = { .suspend = usbnet_suspend, .resume = usbnet_resume, .no_dynamic_id = 1, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(sierra_net_driver); diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index fb1a087b101d..1c6e51588da7 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -1254,6 +1254,7 @@ static struct usb_driver smsc75xx_driver = { .suspend = usbnet_suspend, .resume = usbnet_resume, .disconnect = usbnet_disconnect, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(smsc75xx_driver); diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 94ae66999f59..b1112e753859 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1297,6 +1297,7 @@ static struct usb_driver smsc95xx_driver = { .suspend = usbnet_suspend, .resume = usbnet_resume, .disconnect = usbnet_disconnect, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(smsc95xx_driver); diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c index 34db195fb8b0..35c90307d473 100644 --- a/drivers/net/usb/zaurus.c +++ b/drivers/net/usb/zaurus.c @@ -377,6 +377,7 @@ static struct usb_driver zaurus_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(zaurus_driver); diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index d70ede7a7f96..d58431e99f73 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -203,37 +203,6 @@ config WANXL_BUILD_FIRMWARE You should never need this option, say N. -config PC300 - tristate "Cyclades-PC300 support (RS-232/V.35, X.21, T1/E1 boards)" - depends on HDLC && PCI && BROKEN - ---help--- - This driver is broken because of struct tty_driver change. - - Driver for the Cyclades-PC300 synchronous communication boards. - - These boards provide synchronous serial interfaces to your - Linux box (interfaces currently available are RS-232/V.35, X.21 and - T1/E1). If you wish to support Multilink PPP, please select the - option later and read the file README.mlppp provided by PC300 - package. - - To compile this as a module, choose M here: the module - will be called pc300. - - If unsure, say N. - -config PC300_MLPPP - bool "Cyclades-PC300 MLPPP support" - depends on PC300 && PPP_MULTILINK && PPP_SYNC_TTY && HDLC_PPP - help - Multilink PPP over the PC300 synchronous communication boards. - -comment "Cyclades-PC300 MLPPP support is disabled." - depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP) - -comment "Refer to the file README.mlppp, provided by PC300 package." - depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP) - config PC300TOO tristate "Cyclades PC300 RSV/X21 alternative support" depends on HDLC && PCI diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile index 19d14bc28356..eac709bed7ae 100644 --- a/drivers/net/wan/Makefile +++ b/drivers/net/wan/Makefile @@ -17,10 +17,6 @@ obj-$(CONFIG_HDLC_FR) += hdlc_fr.o obj-$(CONFIG_HDLC_PPP) += hdlc_ppp.o obj-$(CONFIG_HDLC_X25) += hdlc_x25.o -pc300-y := pc300_drv.o -pc300-$(CONFIG_PC300_MLPPP) += pc300_tty.o -pc300-objs := $(pc300-y) - obj-$(CONFIG_HOSTESS_SV11) += z85230.o hostess_sv11.o obj-$(CONFIG_SEALEVEL_4021) += z85230.o sealevel.o obj-$(CONFIG_COSA) += cosa.o @@ -35,7 +31,6 @@ obj-$(CONFIG_SDLA) += sdla.o obj-$(CONFIG_CYCLADES_SYNC) += cycx_drv.o cyclomx.o obj-$(CONFIG_LAPBETHER) += lapbether.o obj-$(CONFIG_SBNI) += sbni.o -obj-$(CONFIG_PC300) += pc300.o obj-$(CONFIG_N2) += n2.o obj-$(CONFIG_C101) += c101.o obj-$(CONFIG_WANXL) += wanxl.o diff --git a/drivers/net/wan/pc300-falc-lh.h b/drivers/net/wan/pc300-falc-lh.h deleted file mode 100644 index 01ed23ca76c7..000000000000 --- a/drivers/net/wan/pc300-falc-lh.h +++ /dev/null @@ -1,1238 +0,0 @@ -/* - * falc.h Description of the Siemens FALC T1/E1 framer. - * - * Author: Ivan Passos <ivan@cyclades.com> - * - * Copyright: (c) 2000-2001 Cyclades Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * $Log: falc-lh.h,v $ - * Revision 3.1 2001/06/15 12:41:10 regina - * upping major version number - * - * Revision 1.1.1.1 2001/06/13 20:24:47 daniela - * PC300 initial CVS version (3.4.0-pre1) - * - * Revision 1.1 2000/05/15 ivan - * Included DJA bits for the LIM2 register. - * - * Revision 1.0 2000/02/22 ivan - * Initial version. - * - */ - -#ifndef _FALC_LH_H -#define _FALC_LH_H - -#define NUM_OF_T1_CHANNELS 24 -#define NUM_OF_E1_CHANNELS 32 - -/*>>>>>>>>>>>>>>>>> FALC Register Bits (Transmit Mode) <<<<<<<<<<<<<<<<<<< */ - -/* CMDR (Command Register) - ---------------- E1 & T1 ------------------------------ */ -#define CMDR_RMC 0x80 -#define CMDR_RRES 0x40 -#define CMDR_XREP 0x20 -#define CMDR_XRES 0x10 -#define CMDR_XHF 0x08 -#define CMDR_XTF 0x04 -#define CMDR_XME 0x02 -#define CMDR_SRES 0x01 - -/* MODE (Mode Register) - ----------------- E1 & T1 ----------------------------- */ -#define MODE_MDS2 0x80 -#define MODE_MDS1 0x40 -#define MODE_MDS0 0x20 -#define MODE_BRAC 0x10 -#define MODE_HRAC 0x08 - -/* IPC (Interrupt Port Configuration) - ----------------- E1 & T1 ----------------------------- */ -#define IPC_VIS 0x80 -#define IPC_SCI 0x04 -#define IPC_IC1 0x02 -#define IPC_IC0 0x01 - -/* CCR1 (Common Configuration Register 1) - ----------------- E1 & T1 ----------------------------- */ -#define CCR1_SFLG 0x80 -#define CCR1_XTS16RA 0x40 -#define CCR1_BRM 0x40 -#define CCR1_CASSYM 0x20 -#define CCR1_EDLX 0x20 -#define CCR1_EITS 0x10 -#define CCR1_ITF 0x08 -#define CCR1_RFT1 0x02 -#define CCR1_RFT0 0x01 - -/* CCR3 (Common Configuration Register 3) - ---------------- E1 & T1 ------------------------------ */ - -#define CCR3_PRE1 0x80 -#define CCR3_PRE0 0x40 -#define CCR3_EPT 0x20 -#define CCR3_RADD 0x10 -#define CCR3_RCRC 0x04 -#define CCR3_XCRC 0x02 - - -/* RTR1-4 (Receive Timeslot Register 1-4) - ---------------- E1 & T1 ------------------------------ */ - -#define RTR1_TS0 0x80 -#define RTR1_TS1 0x40 -#define RTR1_TS2 0x20 -#define RTR1_TS3 0x10 -#define RTR1_TS4 0x08 -#define RTR1_TS5 0x04 -#define RTR1_TS6 0x02 -#define RTR1_TS7 0x01 - -#define RTR2_TS8 0x80 -#define RTR2_TS9 0x40 -#define RTR2_TS10 0x20 -#define RTR2_TS11 0x10 -#define RTR2_TS12 0x08 -#define RTR2_TS13 0x04 -#define RTR2_TS14 0x02 -#define RTR2_TS15 0x01 - -#define RTR3_TS16 0x80 -#define RTR3_TS17 0x40 -#define RTR3_TS18 0x20 -#define RTR3_TS19 0x10 -#define RTR3_TS20 0x08 -#define RTR3_TS21 0x04 -#define RTR3_TS22 0x02 -#define RTR3_TS23 0x01 - -#define RTR4_TS24 0x80 -#define RTR4_TS25 0x40 -#define RTR4_TS26 0x20 -#define RTR4_TS27 0x10 -#define RTR4_TS28 0x08 -#define RTR4_TS29 0x04 -#define RTR4_TS30 0x02 -#define RTR4_TS31 0x01 - - -/* TTR1-4 (Transmit Timeslot Register 1-4) - ---------------- E1 & T1 ------------------------------ */ - -#define TTR1_TS0 0x80 -#define TTR1_TS1 0x40 -#define TTR1_TS2 0x20 -#define TTR1_TS3 0x10 -#define TTR1_TS4 0x08 -#define TTR1_TS5 0x04 -#define TTR1_TS6 0x02 -#define TTR1_TS7 0x01 - -#define TTR2_TS8 0x80 -#define TTR2_TS9 0x40 -#define TTR2_TS10 0x20 -#define TTR2_TS11 0x10 -#define TTR2_TS12 0x08 -#define TTR2_TS13 0x04 -#define TTR2_TS14 0x02 -#define TTR2_TS15 0x01 - -#define TTR3_TS16 0x80 -#define TTR3_TS17 0x40 -#define TTR3_TS18 0x20 -#define TTR3_TS19 0x10 -#define TTR3_TS20 0x08 -#define TTR3_TS21 0x04 -#define TTR3_TS22 0x02 -#define TTR3_TS23 0x01 - -#define TTR4_TS24 0x80 -#define TTR4_TS25 0x40 -#define TTR4_TS26 0x20 -#define TTR4_TS27 0x10 -#define TTR4_TS28 0x08 -#define TTR4_TS29 0x04 -#define TTR4_TS30 0x02 -#define TTR4_TS31 0x01 - - - -/* IMR0-4 (Interrupt Mask Register 0-4) - - ----------------- E1 & T1 ----------------------------- */ - -#define IMR0_RME 0x80 -#define IMR0_RFS 0x40 -#define IMR0_T8MS 0x20 -#define IMR0_ISF 0x20 -#define IMR0_RMB 0x10 -#define IMR0_CASC 0x08 -#define IMR0_RSC 0x08 -#define IMR0_CRC6 0x04 -#define IMR0_CRC4 0x04 -#define IMR0_PDEN 0x02 -#define IMR0_RPF 0x01 - -#define IMR1_CASE 0x80 -#define IMR1_RDO 0x40 -#define IMR1_ALLS 0x20 -#define IMR1_XDU 0x10 -#define IMR1_XMB 0x08 -#define IMR1_XLSC 0x02 -#define IMR1_XPR 0x01 -#define IMR1_LLBSC 0x80 - -#define IMR2_FAR 0x80 -#define IMR2_LFA 0x40 -#define IMR2_MFAR 0x20 -#define IMR2_T400MS 0x10 -#define IMR2_LMFA 0x10 -#define IMR2_AIS 0x08 -#define IMR2_LOS 0x04 -#define IMR2_RAR 0x02 -#define IMR2_RA 0x01 - -#define IMR3_ES 0x80 -#define IMR3_SEC 0x40 -#define IMR3_LMFA16 0x20 -#define IMR3_AIS16 0x10 -#define IMR3_RA16 0x08 -#define IMR3_API 0x04 -#define IMR3_XSLP 0x20 -#define IMR3_XSLN 0x10 -#define IMR3_LLBSC 0x08 -#define IMR3_XRS 0x04 -#define IMR3_SLN 0x02 -#define IMR3_SLP 0x01 - -#define IMR4_LFA 0x80 -#define IMR4_FER 0x40 -#define IMR4_CER 0x20 -#define IMR4_AIS 0x10 -#define IMR4_LOS 0x08 -#define IMR4_CVE 0x04 -#define IMR4_SLIP 0x02 -#define IMR4_EBE 0x01 - -/* FMR0-5 for E1 and T1 (Framer Mode Register ) */ - -#define FMR0_XC1 0x80 -#define FMR0_XC0 0x40 -#define FMR0_RC1 0x20 -#define FMR0_RC0 0x10 -#define FMR0_EXTD 0x08 -#define FMR0_ALM 0x04 -#define E1_FMR0_FRS 0x02 -#define T1_FMR0_FRS 0x08 -#define FMR0_SRAF 0x04 -#define FMR0_EXLS 0x02 -#define FMR0_SIM 0x01 - -#define FMR1_MFCS 0x80 -#define FMR1_AFR 0x40 -#define FMR1_ENSA 0x20 -#define FMR1_CTM 0x80 -#define FMR1_SIGM 0x40 -#define FMR1_EDL 0x20 -#define FMR1_PMOD 0x10 -#define FMR1_XFS 0x08 -#define FMR1_CRC 0x08 -#define FMR1_ECM 0x04 -#define FMR1_IMOD 0x02 -#define FMR1_XAIS 0x01 - -#define FMR2_RFS1 0x80 -#define FMR2_RFS0 0x40 -#define FMR2_MCSP 0x40 -#define FMR2_RTM 0x20 -#define FMR2_SSP 0x20 -#define FMR2_DAIS 0x10 -#define FMR2_SAIS 0x08 -#define FMR2_PLB 0x04 -#define FMR2_AXRA 0x02 -#define FMR2_ALMF 0x01 -#define FMR2_EXZE 0x01 - -#define LOOP_RTM 0x40 -#define LOOP_SFM 0x40 -#define LOOP_ECLB 0x20 -#define LOOP_CLA 0x1f - -/*--------------------- E1 ----------------------------*/ -#define FMR3_XLD 0x20 -#define FMR3_XLU 0x10 - -/*--------------------- T1 ----------------------------*/ -#define FMR4_AIS3 0x80 -#define FMR4_TM 0x40 -#define FMR4_XRA 0x20 -#define FMR4_SSC1 0x10 -#define FMR4_SSC0 0x08 -#define FMR4_AUTO 0x04 -#define FMR4_FM1 0x02 -#define FMR4_FM0 0x01 - -#define FMR5_SRS 0x80 -#define FMR5_EIBR 0x40 -#define FMR5_XLD 0x20 -#define FMR5_XLU 0x10 - - -/* LOOP (Channel Loop Back) - - ------------------ E1 & T1 ---------------------------- */ - -#define LOOP_SFM 0x40 -#define LOOP_ECLB 0x20 -#define LOOP_CLA4 0x10 -#define LOOP_CLA3 0x08 -#define LOOP_CLA2 0x04 -#define LOOP_CLA1 0x02 -#define LOOP_CLA0 0x01 - - - -/* XSW (Transmit Service Word Pulseframe) - - ------------------- E1 --------------------------- */ - -#define XSW_XSIS 0x80 -#define XSW_XTM 0x40 -#define XSW_XRA 0x20 -#define XSW_XY0 0x10 -#define XSW_XY1 0x08 -#define XSW_XY2 0x04 -#define XSW_XY3 0x02 -#define XSW_XY4 0x01 - - -/* XSP (Transmit Spare Bits) - - ------------------- E1 --------------------------- */ - -#define XSP_XAP 0x80 -#define XSP_CASEN 0x40 -#define XSP_TT0 0x20 -#define XSP_EBP 0x10 -#define XSP_AXS 0x08 -#define XSP_XSIF 0x04 -#define XSP_XS13 0x02 -#define XSP_XS15 0x01 - - -/* XC0/1 (Transmit Control 0/1) - ------------------ E1 & T1 ---------------------------- */ - -#define XC0_SA8E 0x80 -#define XC0_SA7E 0x40 -#define XC0_SA6E 0x20 -#define XC0_SA5E 0x10 -#define XC0_SA4E 0x08 -#define XC0_BRM 0x80 -#define XC0_MFBS 0x40 -#define XC0_SFRZ 0x10 -#define XC0_XCO2 0x04 -#define XC0_XCO1 0x02 -#define XC0_XCO0 0x01 - -#define XC1_XTO5 0x20 -#define XC1_XTO4 0x10 -#define XC1_XTO3 0x08 -#define XC1_XTO2 0x04 -#define XC1_XTO1 0x02 -#define XC1_XTO0 0x01 - - -/* RC0/1 (Receive Control 0/1) - ------------------ E1 & T1 ---------------------------- */ - -#define RC0_SICS 0x40 -#define RC0_CRCI 0x20 -#define RC0_XCRCI 0x10 -#define RC0_RDIS 0x08 -#define RC0_RCO2 0x04 -#define RC0_RCO1 0x02 -#define RC0_RCO0 0x01 - -#define RC1_SWD 0x80 -#define RC1_ASY4 0x40 -#define RC1_RRAM 0x40 -#define RC1_RTO5 0x20 -#define RC1_RTO4 0x10 -#define RC1_RTO3 0x08 -#define RC1_RTO2 0x04 -#define RC1_RTO1 0x02 -#define RC1_RTO0 0x01 - - - -/* XPM0-2 (Transmit Pulse Mask 0-2) - --------------------- E1 & T1 ------------------------- */ - -#define XPM0_XP12 0x80 -#define XPM0_XP11 0x40 -#define XPM0_XP10 0x20 -#define XPM0_XP04 0x10 -#define XPM0_XP03 0x08 -#define XPM0_XP02 0x04 -#define XPM0_XP01 0x02 -#define XPM0_XP00 0x01 - -#define XPM1_XP30 0x80 -#define XPM1_XP24 0x40 -#define XPM1_XP23 0x20 -#define XPM1_XP22 0x10 -#define XPM1_XP21 0x08 -#define XPM1_XP20 0x04 -#define XPM1_XP14 0x02 -#define XPM1_XP13 0x01 - -#define XPM2_XLHP 0x80 -#define XPM2_XLT 0x40 -#define XPM2_DAXLT 0x20 -#define XPM2_XP34 0x08 -#define XPM2_XP33 0x04 -#define XPM2_XP32 0x02 -#define XPM2_XP31 0x01 - - -/* TSWM (Transparent Service Word Mask) - ------------------ E1 ---------------------------- */ - -#define TSWM_TSIS 0x80 -#define TSWM_TSIF 0x40 -#define TSWM_TRA 0x20 -#define TSWM_TSA4 0x10 -#define TSWM_TSA5 0x08 -#define TSWM_TSA6 0x04 -#define TSWM_TSA7 0x02 -#define TSWM_TSA8 0x01 - -/* IDLE <Idle Channel Code Register> - - ------------------ E1 & T1 ----------------------- */ - -#define IDLE_IDL7 0x80 -#define IDLE_IDL6 0x40 -#define IDLE_IDL5 0x20 -#define IDLE_IDL4 0x10 -#define IDLE_IDL3 0x08 -#define IDLE_IDL2 0x04 -#define IDLE_IDL1 0x02 -#define IDLE_IDL0 0x01 - - -/* XSA4-8 <Transmit SA4-8 Register(Read/Write) > - -------------------E1 ----------------------------- */ - -#define XSA4_XS47 0x80 -#define XSA4_XS46 0x40 -#define XSA4_XS45 0x20 -#define XSA4_XS44 0x10 -#define XSA4_XS43 0x08 -#define XSA4_XS42 0x04 -#define XSA4_XS41 0x02 -#define XSA4_XS40 0x01 - -#define XSA5_XS57 0x80 -#define XSA5_XS56 0x40 -#define XSA5_XS55 0x20 -#define XSA5_XS54 0x10 -#define XSA5_XS53 0x08 -#define XSA5_XS52 0x04 -#define XSA5_XS51 0x02 -#define XSA5_XS50 0x01 - -#define XSA6_XS67 0x80 -#define XSA6_XS66 0x40 -#define XSA6_XS65 0x20 -#define XSA6_XS64 0x10 -#define XSA6_XS63 0x08 -#define XSA6_XS62 0x04 -#define XSA6_XS61 0x02 -#define XSA6_XS60 0x01 - -#define XSA7_XS77 0x80 -#define XSA7_XS76 0x40 -#define XSA7_XS75 0x20 -#define XSA7_XS74 0x10 -#define XSA7_XS73 0x08 -#define XSA7_XS72 0x04 -#define XSA7_XS71 0x02 -#define XSA7_XS70 0x01 - -#define XSA8_XS87 0x80 -#define XSA8_XS86 0x40 -#define XSA8_XS85 0x20 -#define XSA8_XS84 0x10 -#define XSA8_XS83 0x08 -#define XSA8_XS82 0x04 -#define XSA8_XS81 0x02 -#define XSA8_XS80 0x01 - - -/* XDL1-3 (Transmit DL-Bit Register1-3 (read/write)) - ----------------------- T1 --------------------- */ - -#define XDL1_XDL17 0x80 -#define XDL1_XDL16 0x40 -#define XDL1_XDL15 0x20 -#define XDL1_XDL14 0x10 -#define XDL1_XDL13 0x08 -#define XDL1_XDL12 0x04 -#define XDL1_XDL11 0x02 -#define XDL1_XDL10 0x01 - -#define XDL2_XDL27 0x80 -#define XDL2_XDL26 0x40 -#define XDL2_XDL25 0x20 -#define XDL2_XDL24 0x10 -#define XDL2_XDL23 0x08 -#define XDL2_XDL22 0x04 -#define XDL2_XDL21 0x02 -#define XDL2_XDL20 0x01 - -#define XDL3_XDL37 0x80 -#define XDL3_XDL36 0x40 -#define XDL3_XDL35 0x20 -#define XDL3_XDL34 0x10 -#define XDL3_XDL33 0x08 -#define XDL3_XDL32 0x04 -#define XDL3_XDL31 0x02 -#define XDL3_XDL30 0x01 - - -/* ICB1-4 (Idle Channel Register 1-4) - ------------------ E1 ---------------------------- */ - -#define E1_ICB1_IC0 0x80 -#define E1_ICB1_IC1 0x40 -#define E1_ICB1_IC2 0x20 -#define E1_ICB1_IC3 0x10 -#define E1_ICB1_IC4 0x08 -#define E1_ICB1_IC5 0x04 -#define E1_ICB1_IC6 0x02 -#define E1_ICB1_IC7 0x01 - -#define E1_ICB2_IC8 0x80 -#define E1_ICB2_IC9 0x40 -#define E1_ICB2_IC10 0x20 -#define E1_ICB2_IC11 0x10 -#define E1_ICB2_IC12 0x08 -#define E1_ICB2_IC13 0x04 -#define E1_ICB2_IC14 0x02 -#define E1_ICB2_IC15 0x01 - -#define E1_ICB3_IC16 0x80 -#define E1_ICB3_IC17 0x40 -#define E1_ICB3_IC18 0x20 -#define E1_ICB3_IC19 0x10 -#define E1_ICB3_IC20 0x08 -#define E1_ICB3_IC21 0x04 -#define E1_ICB3_IC22 0x02 -#define E1_ICB3_IC23 0x01 - -#define E1_ICB4_IC24 0x80 -#define E1_ICB4_IC25 0x40 -#define E1_ICB4_IC26 0x20 -#define E1_ICB4_IC27 0x10 -#define E1_ICB4_IC28 0x08 -#define E1_ICB4_IC29 0x04 -#define E1_ICB4_IC30 0x02 -#define E1_ICB4_IC31 0x01 - -/* ICB1-4 (Idle Channel Register 1-4) - ------------------ T1 ---------------------------- */ - -#define T1_ICB1_IC1 0x80 -#define T1_ICB1_IC2 0x40 -#define T1_ICB1_IC3 0x20 -#define T1_ICB1_IC4 0x10 -#define T1_ICB1_IC5 0x08 -#define T1_ICB1_IC6 0x04 -#define T1_ICB1_IC7 0x02 -#define T1_ICB1_IC8 0x01 - -#define T1_ICB2_IC9 0x80 -#define T1_ICB2_IC10 0x40 -#define T1_ICB2_IC11 0x20 -#define T1_ICB2_IC12 0x10 -#define T1_ICB2_IC13 0x08 -#define T1_ICB2_IC14 0x04 -#define T1_ICB2_IC15 0x02 -#define T1_ICB2_IC16 0x01 - -#define T1_ICB3_IC17 0x80 -#define T1_ICB3_IC18 0x40 -#define T1_ICB3_IC19 0x20 -#define T1_ICB3_IC20 0x10 -#define T1_ICB3_IC21 0x08 -#define T1_ICB3_IC22 0x04 -#define T1_ICB3_IC23 0x02 -#define T1_ICB3_IC24 0x01 - -/* FMR3 (Framer Mode Register 3) - --------------------E1------------------------ */ - -#define FMR3_CMI 0x08 -#define FMR3_SYNSA 0x04 -#define FMR3_CFRZ 0x02 -#define FMR3_EXTIW 0x01 - - - -/* CCB1-3 (Clear Channel Register) - ------------------- T1 ----------------------- */ - -#define CCB1_CH1 0x80 -#define CCB1_CH2 0x40 -#define CCB1_CH3 0x20 -#define CCB1_CH4 0x10 -#define CCB1_CH5 0x08 -#define CCB1_CH6 0x04 -#define CCB1_CH7 0x02 -#define CCB1_CH8 0x01 - -#define CCB2_CH9 0x80 -#define CCB2_CH10 0x40 -#define CCB2_CH11 0x20 -#define CCB2_CH12 0x10 -#define CCB2_CH13 0x08 -#define CCB2_CH14 0x04 -#define CCB2_CH15 0x02 -#define CCB2_CH16 0x01 - -#define CCB3_CH17 0x80 -#define CCB3_CH18 0x40 -#define CCB3_CH19 0x20 -#define CCB3_CH20 0x10 -#define CCB3_CH21 0x08 -#define CCB3_CH22 0x04 -#define CCB3_CH23 0x02 -#define CCB3_CH24 0x01 - - -/* LIM0/1 (Line Interface Mode 0/1) - ------------------- E1 & T1 --------------------------- */ - -#define LIM0_XFB 0x80 -#define LIM0_XDOS 0x40 -#define LIM0_SCL1 0x20 -#define LIM0_SCL0 0x10 -#define LIM0_EQON 0x08 -#define LIM0_ELOS 0x04 -#define LIM0_LL 0x02 -#define LIM0_MAS 0x01 - -#define LIM1_EFSC 0x80 -#define LIM1_RIL2 0x40 -#define LIM1_RIL1 0x20 -#define LIM1_RIL0 0x10 -#define LIM1_DCOC 0x08 -#define LIM1_JATT 0x04 -#define LIM1_RL 0x02 -#define LIM1_DRS 0x01 - - -/* PCDR (Pulse Count Detection Register(Read/Write)) - ------------------ E1 & T1 ------------------------- */ - -#define PCDR_PCD7 0x80 -#define PCDR_PCD6 0x40 -#define PCDR_PCD5 0x20 -#define PCDR_PCD4 0x10 -#define PCDR_PCD3 0x08 -#define PCDR_PCD2 0x04 -#define PCDR_PCD1 0x02 -#define PCDR_PCD0 0x01 - -#define PCRR_PCR7 0x80 -#define PCRR_PCR6 0x40 -#define PCRR_PCR5 0x20 -#define PCRR_PCR4 0x10 -#define PCRR_PCR3 0x08 -#define PCRR_PCR2 0x04 -#define PCRR_PCR1 0x02 -#define PCRR_PCR0 0x01 - - -/* LIM2 (Line Interface Mode 2) - - ------------------ E1 & T1 ---------------------------- */ - -#define LIM2_DJA2 0x20 -#define LIM2_DJA1 0x10 -#define LIM2_LOS2 0x02 -#define LIM2_LOS1 0x01 - -/* LCR1 (Loop Code Register 1) */ - -#define LCR1_EPRM 0x80 -#define LCR1_XPRBS 0x40 - -/* SIC1 (System Interface Control 1) */ -#define SIC1_SRSC 0x80 -#define SIC1_RBS1 0x20 -#define SIC1_RBS0 0x10 -#define SIC1_SXSC 0x08 -#define SIC1_XBS1 0x02 -#define SIC1_XBS0 0x01 - -/* DEC (Disable Error Counter) - ------------------ E1 & T1 ---------------------------- */ - -#define DEC_DCEC3 0x20 -#define DEC_DBEC 0x10 -#define DEC_DCEC1 0x08 -#define DEC_DCEC 0x08 -#define DEC_DEBC 0x04 -#define DEC_DCVC 0x02 -#define DEC_DFEC 0x01 - - -/* FALC Register Bits (Receive Mode) - ---------------------------------------------------------------------------- */ - - -/* FRS0/1 (Framer Receive Status Register 0/1) - ----------------- E1 & T1 ---------------------------------- */ - -#define FRS0_LOS 0x80 -#define FRS0_AIS 0x40 -#define FRS0_LFA 0x20 -#define FRS0_RRA 0x10 -#define FRS0_API 0x08 -#define FRS0_NMF 0x04 -#define FRS0_LMFA 0x02 -#define FRS0_FSRF 0x01 - -#define FRS1_TS16RA 0x40 -#define FRS1_TS16LOS 0x20 -#define FRS1_TS16AIS 0x10 -#define FRS1_TS16LFA 0x08 -#define FRS1_EXZD 0x80 -#define FRS1_LLBDD 0x10 -#define FRS1_LLBAD 0x08 -#define FRS1_XLS 0x02 -#define FRS1_XLO 0x01 -#define FRS1_PDEN 0x40 - -/* FRS2/3 (Framer Receive Status Register 2/3) - ----------------- T1 ---------------------------------- */ - -#define FRS2_ESC2 0x80 -#define FRS2_ESC1 0x40 -#define FRS2_ESC0 0x20 - -#define FRS3_FEH5 0x20 -#define FRS3_FEH4 0x10 -#define FRS3_FEH3 0x08 -#define FRS3_FEH2 0x04 -#define FRS3_FEH1 0x02 -#define FRS3_FEH0 0x01 - - -/* RSW (Receive Service Word Pulseframe) - ----------------- E1 ------------------------------ */ - -#define RSW_RSI 0x80 -#define RSW_RRA 0x20 -#define RSW_RYO 0x10 -#define RSW_RY1 0x08 -#define RSW_RY2 0x04 -#define RSW_RY3 0x02 -#define RSW_RY4 0x01 - - -/* RSP (Receive Spare Bits / Additional Status) - ---------------- E1 ------------------------------- */ - -#define RSP_SI1 0x80 -#define RSP_SI2 0x40 -#define RSP_LLBDD 0x10 -#define RSP_LLBAD 0x08 -#define RSP_RSIF 0x04 -#define RSP_RS13 0x02 -#define RSP_RS15 0x01 - - -/* FECL (Framing Error Counter) - ---------------- E1 & T1 -------------------------- */ - -#define FECL_FE7 0x80 -#define FECL_FE6 0x40 -#define FECL_FE5 0x20 -#define FECL_FE4 0x10 -#define FECL_FE3 0x08 -#define FECL_FE2 0x04 -#define FECL_FE1 0x02 -#define FECL_FE0 0x01 - -#define FECH_FE15 0x80 -#define FECH_FE14 0x40 -#define FECH_FE13 0x20 -#define FECH_FE12 0x10 -#define FECH_FE11 0x08 -#define FECH_FE10 0x04 -#define FECH_FE9 0x02 -#define FECH_FE8 0x01 - - -/* CVCl (Code Violation Counter) - ----------------- E1 ------------------------- */ - -#define CVCL_CV7 0x80 -#define CVCL_CV6 0x40 -#define CVCL_CV5 0x20 -#define CVCL_CV4 0x10 -#define CVCL_CV3 0x08 -#define CVCL_CV2 0x04 -#define CVCL_CV1 0x02 -#define CVCL_CV0 0x01 - -#define CVCH_CV15 0x80 -#define CVCH_CV14 0x40 -#define CVCH_CV13 0x20 -#define CVCH_CV12 0x10 -#define CVCH_CV11 0x08 -#define CVCH_CV10 0x04 -#define CVCH_CV9 0x02 -#define CVCH_CV8 0x01 - - -/* CEC1-3L (CRC Error Counter) - ------------------ E1 ----------------------------- */ - -#define CEC1L_CR7 0x80 -#define CEC1L_CR6 0x40 -#define CEC1L_CR5 0x20 -#define CEC1L_CR4 0x10 -#define CEC1L_CR3 0x08 -#define CEC1L_CR2 0x04 -#define CEC1L_CR1 0x02 -#define CEC1L_CR0 0x01 - -#define CEC1H_CR15 0x80 -#define CEC1H_CR14 0x40 -#define CEC1H_CR13 0x20 -#define CEC1H_CR12 0x10 -#define CEC1H_CR11 0x08 -#define CEC1H_CR10 0x04 -#define CEC1H_CR9 0x02 -#define CEC1H_CR8 0x01 - -#define CEC2L_CR7 0x80 -#define CEC2L_CR6 0x40 -#define CEC2L_CR5 0x20 -#define CEC2L_CR4 0x10 -#define CEC2L_CR3 0x08 -#define CEC2L_CR2 0x04 -#define CEC2L_CR1 0x02 -#define CEC2L_CR0 0x01 - -#define CEC2H_CR15 0x80 -#define CEC2H_CR14 0x40 -#define CEC2H_CR13 0x20 -#define CEC2H_CR12 0x10 -#define CEC2H_CR11 0x08 -#define CEC2H_CR10 0x04 -#define CEC2H_CR9 0x02 -#define CEC2H_CR8 0x01 - -#define CEC3L_CR7 0x80 -#define CEC3L_CR6 0x40 -#define CEC3L_CR5 0x20 -#define CEC3L_CR4 0x10 -#define CEC3L_CR3 0x08 -#define CEC3L_CR2 0x04 -#define CEC3L_CR1 0x02 -#define CEC3L_CR0 0x01 - -#define CEC3H_CR15 0x80 -#define CEC3H_CR14 0x40 -#define CEC3H_CR13 0x20 -#define CEC3H_CR12 0x10 -#define CEC3H_CR11 0x08 -#define CEC3H_CR10 0x04 -#define CEC3H_CR9 0x02 -#define CEC3H_CR8 0x01 - - -/* CECL (CRC Error Counter) - - ------------------ T1 ----------------------------- */ - -#define CECL_CR7 0x80 -#define CECL_CR6 0x40 -#define CECL_CR5 0x20 -#define CECL_CR4 0x10 -#define CECL_CR3 0x08 -#define CECL_CR2 0x04 -#define CECL_CR1 0x02 -#define CECL_CR0 0x01 - -#define CECH_CR15 0x80 -#define CECH_CR14 0x40 -#define CECH_CR13 0x20 -#define CECH_CR12 0x10 -#define CECH_CR11 0x08 -#define CECH_CR10 0x04 -#define CECH_CR9 0x02 -#define CECH_CR8 0x01 - -/* EBCL (E Bit Error Counter) - ------------------- E1 & T1 ------------------------- */ - -#define EBCL_EB7 0x80 -#define EBCL_EB6 0x40 -#define EBCL_EB5 0x20 -#define EBCL_EB4 0x10 -#define EBCL_EB3 0x08 -#define EBCL_EB2 0x04 -#define EBCL_EB1 0x02 -#define EBCL_EB0 0x01 - -#define EBCH_EB15 0x80 -#define EBCH_EB14 0x40 -#define EBCH_EB13 0x20 -#define EBCH_EB12 0x10 -#define EBCH_EB11 0x08 -#define EBCH_EB10 0x04 -#define EBCH_EB9 0x02 -#define EBCH_EB8 0x01 - - -/* RSA4-8 (Receive Sa4-8-Bit Register) - -------------------- E1 --------------------------- */ - -#define RSA4_RS47 0x80 -#define RSA4_RS46 0x40 -#define RSA4_RS45 0x20 -#define RSA4_RS44 0x10 -#define RSA4_RS43 0x08 -#define RSA4_RS42 0x04 -#define RSA4_RS41 0x02 -#define RSA4_RS40 0x01 - -#define RSA5_RS57 0x80 -#define RSA5_RS56 0x40 -#define RSA5_RS55 0x20 -#define RSA5_RS54 0x10 -#define RSA5_RS53 0x08 -#define RSA5_RS52 0x04 -#define RSA5_RS51 0x02 -#define RSA5_RS50 0x01 - -#define RSA6_RS67 0x80 -#define RSA6_RS66 0x40 -#define RSA6_RS65 0x20 -#define RSA6_RS64 0x10 -#define RSA6_RS63 0x08 -#define RSA6_RS62 0x04 -#define RSA6_RS61 0x02 -#define RSA6_RS60 0x01 - -#define RSA7_RS77 0x80 -#define RSA7_RS76 0x40 -#define RSA7_RS75 0x20 -#define RSA7_RS74 0x10 -#define RSA7_RS73 0x08 -#define RSA7_RS72 0x04 -#define RSA7_RS71 0x02 -#define RSA7_RS70 0x01 - -#define RSA8_RS87 0x80 -#define RSA8_RS86 0x40 -#define RSA8_RS85 0x20 -#define RSA8_RS84 0x10 -#define RSA8_RS83 0x08 -#define RSA8_RS82 0x04 -#define RSA8_RS81 0x02 -#define RSA8_RS80 0x01 - -/* RSA6S (Receive Sa6 Bit Status Register) - ------------------------ T1 ------------------------- */ - -#define RSA6S_SX 0x20 -#define RSA6S_SF 0x10 -#define RSA6S_SE 0x08 -#define RSA6S_SC 0x04 -#define RSA6S_SA 0x02 -#define RSA6S_S8 0x01 - - -/* RDL1-3 Receive DL-Bit Register1-3) - ------------------------ T1 ------------------------- */ - -#define RDL1_RDL17 0x80 -#define RDL1_RDL16 0x40 -#define RDL1_RDL15 0x20 -#define RDL1_RDL14 0x10 -#define RDL1_RDL13 0x08 -#define RDL1_RDL12 0x04 -#define RDL1_RDL11 0x02 -#define RDL1_RDL10 0x01 - -#define RDL2_RDL27 0x80 -#define RDL2_RDL26 0x40 -#define RDL2_RDL25 0x20 -#define RDL2_RDL24 0x10 -#define RDL2_RDL23 0x08 -#define RDL2_RDL22 0x04 -#define RDL2_RDL21 0x02 -#define RDL2_RDL20 0x01 - -#define RDL3_RDL37 0x80 -#define RDL3_RDL36 0x40 -#define RDL3_RDL35 0x20 -#define RDL3_RDL34 0x10 -#define RDL3_RDL33 0x08 -#define RDL3_RDL32 0x04 -#define RDL3_RDL31 0x02 -#define RDL3_RDL30 0x01 - - -/* SIS (Signaling Status Register) - - -------------------- E1 & T1 -------------------------- */ - -#define SIS_XDOV 0x80 -#define SIS_XFW 0x40 -#define SIS_XREP 0x20 -#define SIS_RLI 0x08 -#define SIS_CEC 0x04 -#define SIS_BOM 0x01 - - -/* RSIS (Receive Signaling Status Register) - - -------------------- E1 & T1 --------------------------- */ - -#define RSIS_VFR 0x80 -#define RSIS_RDO 0x40 -#define RSIS_CRC16 0x20 -#define RSIS_RAB 0x10 -#define RSIS_HA1 0x08 -#define RSIS_HA0 0x04 -#define RSIS_HFR 0x02 -#define RSIS_LA 0x01 - - -/* RBCL/H (Receive Byte Count Low/High) - - ------------------- E1 & T1 ----------------------- */ - -#define RBCL_RBC7 0x80 -#define RBCL_RBC6 0x40 -#define RBCL_RBC5 0x20 -#define RBCL_RBC4 0x10 -#define RBCL_RBC3 0x08 -#define RBCL_RBC2 0x04 -#define RBCL_RBC1 0x02 -#define RBCL_RBC0 0x01 - -#define RBCH_OV 0x10 -#define RBCH_RBC11 0x08 -#define RBCH_RBC10 0x04 -#define RBCH_RBC9 0x02 -#define RBCH_RBC8 0x01 - - -/* ISR1-3 (Interrupt Status Register 1-3) - - ------------------ E1 & T1 ------------------------------ */ - -#define FISR0_RME 0x80 -#define FISR0_RFS 0x40 -#define FISR0_T8MS 0x20 -#define FISR0_ISF 0x20 -#define FISR0_RMB 0x10 -#define FISR0_CASC 0x08 -#define FISR0_RSC 0x08 -#define FISR0_CRC6 0x04 -#define FISR0_CRC4 0x04 -#define FISR0_PDEN 0x02 -#define FISR0_RPF 0x01 - -#define FISR1_CASE 0x80 -#define FISR1_LLBSC 0x80 -#define FISR1_RDO 0x40 -#define FISR1_ALLS 0x20 -#define FISR1_XDU 0x10 -#define FISR1_XMB 0x08 -#define FISR1_XLSC 0x02 -#define FISR1_XPR 0x01 - -#define FISR2_FAR 0x80 -#define FISR2_LFA 0x40 -#define FISR2_MFAR 0x20 -#define FISR2_T400MS 0x10 -#define FISR2_LMFA 0x10 -#define FISR2_AIS 0x08 -#define FISR2_LOS 0x04 -#define FISR2_RAR 0x02 -#define FISR2_RA 0x01 - -#define FISR3_ES 0x80 -#define FISR3_SEC 0x40 -#define FISR3_LMFA16 0x20 -#define FISR3_AIS16 0x10 -#define FISR3_RA16 0x08 -#define FISR3_API 0x04 -#define FISR3_XSLP 0x20 -#define FISR3_XSLN 0x10 -#define FISR3_LLBSC 0x08 -#define FISR3_XRS 0x04 -#define FISR3_SLN 0x02 -#define FISR3_SLP 0x01 - - -/* GIS (Global Interrupt Status Register) - - --------------------- E1 & T1 --------------------- */ - -#define GIS_ISR3 0x08 -#define GIS_ISR2 0x04 -#define GIS_ISR1 0x02 -#define GIS_ISR0 0x01 - - -/* VSTR (Version Status Register) - - --------------------- E1 & T1 --------------------- */ - -#define VSTR_VN3 0x08 -#define VSTR_VN2 0x04 -#define VSTR_VN1 0x02 -#define VSTR_VN0 0x01 - - -/*>>>>>>>>>>>>>>>>>>>>> Local Control Structures <<<<<<<<<<<<<<<<<<<<<<<<< */ - -/* Write-only Registers (E1/T1 control mode write registers) */ -#define XFIFOH 0x00 /* Tx FIFO High Byte */ -#define XFIFOL 0x01 /* Tx FIFO Low Byte */ -#define CMDR 0x02 /* Command Reg */ -#define DEC 0x60 /* Disable Error Counter */ -#define TEST2 0x62 /* Manuf. Test Reg 2 */ -#define XS(nbr) (0x70 + (nbr)) /* Tx CAS Reg (0 to 15) */ - -/* Read-write Registers (E1/T1 status mode read registers) */ -#define MODE 0x03 /* Mode Reg */ -#define RAH1 0x04 /* Receive Address High 1 */ -#define RAH2 0x05 /* Receive Address High 2 */ -#define RAL1 0x06 /* Receive Address Low 1 */ -#define RAL2 0x07 /* Receive Address Low 2 */ -#define IPC 0x08 /* Interrupt Port Configuration */ -#define CCR1 0x09 /* Common Configuration Reg 1 */ -#define CCR3 0x0A /* Common Configuration Reg 3 */ -#define PRE 0x0B /* Preamble Reg */ -#define RTR1 0x0C /* Receive Timeslot Reg 1 */ -#define RTR2 0x0D /* Receive Timeslot Reg 2 */ -#define RTR3 0x0E /* Receive Timeslot Reg 3 */ -#define RTR4 0x0F /* Receive Timeslot Reg 4 */ -#define TTR1 0x10 /* Transmit Timeslot Reg 1 */ -#define TTR2 0x11 /* Transmit Timeslot Reg 2 */ -#define TTR3 0x12 /* Transmit Timeslot Reg 3 */ -#define TTR4 0x13 /* Transmit Timeslot Reg 4 */ -#define IMR0 0x14 /* Interrupt Mask Reg 0 */ -#define IMR1 0x15 /* Interrupt Mask Reg 1 */ -#define IMR2 0x16 /* Interrupt Mask Reg 2 */ -#define IMR3 0x17 /* Interrupt Mask Reg 3 */ -#define IMR4 0x18 /* Interrupt Mask Reg 4 */ -#define IMR5 0x19 /* Interrupt Mask Reg 5 */ -#define FMR0 0x1A /* Framer Mode Reigster 0 */ -#define FMR1 0x1B /* Framer Mode Reigster 1 */ -#define FMR2 0x1C /* Framer Mode Reigster 2 */ -#define LOOP 0x1D /* Channel Loop Back */ -#define XSW 0x1E /* Transmit Service Word */ -#define FMR4 0x1E /* Framer Mode Reg 4 */ -#define XSP 0x1F /* Transmit Spare Bits */ -#define FMR5 0x1F /* Framer Mode Reg 5 */ -#define XC0 0x20 /* Transmit Control 0 */ -#define XC1 0x21 /* Transmit Control 1 */ -#define RC0 0x22 /* Receive Control 0 */ -#define RC1 0x23 /* Receive Control 1 */ -#define XPM0 0x24 /* Transmit Pulse Mask 0 */ -#define XPM1 0x25 /* Transmit Pulse Mask 1 */ -#define XPM2 0x26 /* Transmit Pulse Mask 2 */ -#define TSWM 0x27 /* Transparent Service Word Mask */ -#define TEST1 0x28 /* Manuf. Test Reg 1 */ -#define IDLE 0x29 /* Idle Channel Code */ -#define XSA4 0x2A /* Transmit SA4 Bit Reg */ -#define XDL1 0x2A /* Transmit DL-Bit Reg 2 */ -#define XSA5 0x2B /* Transmit SA4 Bit Reg */ -#define XDL2 0x2B /* Transmit DL-Bit Reg 2 */ -#define XSA6 0x2C /* Transmit SA4 Bit Reg */ -#define XDL3 0x2C /* Transmit DL-Bit Reg 2 */ -#define XSA7 0x2D /* Transmit SA4 Bit Reg */ -#define CCB1 0x2D /* Clear Channel Reg 1 */ -#define XSA8 0x2E /* Transmit SA4 Bit Reg */ -#define CCB2 0x2E /* Clear Channel Reg 2 */ -#define FMR3 0x2F /* Framer Mode Reg. 3 */ -#define CCB3 0x2F /* Clear Channel Reg 3 */ -#define ICB1 0x30 /* Idle Channel Reg 1 */ -#define ICB2 0x31 /* Idle Channel Reg 2 */ -#define ICB3 0x32 /* Idle Channel Reg 3 */ -#define ICB4 0x33 /* Idle Channel Reg 4 */ -#define LIM0 0x34 /* Line Interface Mode 0 */ -#define LIM1 0x35 /* Line Interface Mode 1 */ -#define PCDR 0x36 /* Pulse Count Detection */ -#define PCRR 0x37 /* Pulse Count Recovery */ -#define LIM2 0x38 /* Line Interface Mode Reg 2 */ -#define LCR1 0x39 /* Loop Code Reg 1 */ -#define LCR2 0x3A /* Loop Code Reg 2 */ -#define LCR3 0x3B /* Loop Code Reg 3 */ -#define SIC1 0x3C /* System Interface Control 1 */ - -/* Read-only Registers (E1/T1 control mode read registers) */ -#define RFIFOH 0x00 /* Receive FIFO */ -#define RFIFOL 0x01 /* Receive FIFO */ -#define FRS0 0x4C /* Framer Receive Status 0 */ -#define FRS1 0x4D /* Framer Receive Status 1 */ -#define RSW 0x4E /* Receive Service Word */ -#define FRS2 0x4E /* Framer Receive Status 2 */ -#define RSP 0x4F /* Receive Spare Bits */ -#define FRS3 0x4F /* Framer Receive Status 3 */ -#define FECL 0x50 /* Framing Error Counter */ -#define FECH 0x51 /* Framing Error Counter */ -#define CVCL 0x52 /* Code Violation Counter */ -#define CVCH 0x53 /* Code Violation Counter */ -#define CECL 0x54 /* CRC Error Counter 1 */ -#define CECH 0x55 /* CRC Error Counter 1 */ -#define EBCL 0x56 /* E-Bit Error Counter */ -#define EBCH 0x57 /* E-Bit Error Counter */ -#define BECL 0x58 /* Bit Error Counter Low */ -#define BECH 0x59 /* Bit Error Counter Low */ -#define CEC3 0x5A /* CRC Error Counter 3 (16-bit) */ -#define RSA4 0x5C /* Receive SA4 Bit Reg */ -#define RDL1 0x5C /* Receive DL-Bit Reg 1 */ -#define RSA5 0x5D /* Receive SA5 Bit Reg */ -#define RDL2 0x5D /* Receive DL-Bit Reg 2 */ -#define RSA6 0x5E /* Receive SA6 Bit Reg */ -#define RDL3 0x5E /* Receive DL-Bit Reg 3 */ -#define RSA7 0x5F /* Receive SA7 Bit Reg */ -#define RSA8 0x60 /* Receive SA8 Bit Reg */ -#define RSA6S 0x61 /* Receive SA6 Bit Status Reg */ -#define TSR0 0x62 /* Manuf. Test Reg 0 */ -#define TSR1 0x63 /* Manuf. Test Reg 1 */ -#define SIS 0x64 /* Signaling Status Reg */ -#define RSIS 0x65 /* Receive Signaling Status Reg */ -#define RBCL 0x66 /* Receive Byte Control */ -#define RBCH 0x67 /* Receive Byte Control */ -#define FISR0 0x68 /* Interrupt Status Reg 0 */ -#define FISR1 0x69 /* Interrupt Status Reg 1 */ -#define FISR2 0x6A /* Interrupt Status Reg 2 */ -#define FISR3 0x6B /* Interrupt Status Reg 3 */ -#define GIS 0x6E /* Global Interrupt Status */ -#define VSTR 0x6F /* Version Status */ -#define RS(nbr) (0x70 + (nbr)) /* Rx CAS Reg (0 to 15) */ - -#endif /* _FALC_LH_H */ - diff --git a/drivers/net/wan/pc300.h b/drivers/net/wan/pc300.h deleted file mode 100644 index 2e4f84f6cad4..000000000000 --- a/drivers/net/wan/pc300.h +++ /dev/null @@ -1,436 +0,0 @@ -/* - * pc300.h Cyclades-PC300(tm) Kernel API Definitions. - * - * Author: Ivan Passos <ivan@cyclades.com> - * - * Copyright: (c) 1999-2002 Cyclades Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * $Log: pc300.h,v $ - * Revision 3.12 2002/03/07 14:17:09 henrique - * License data fixed - * - * Revision 3.11 2002/01/28 21:09:39 daniela - * Included ';' after pc300hw.bus. - * - * Revision 3.10 2002/01/17 17:58:52 ivan - * Support for PC300-TE/M (PMC). - * - * Revision 3.9 2001/09/28 13:30:53 daniela - * Renamed dma_start routine to rx_dma_start. - * - * Revision 3.8 2001/09/24 13:03:45 daniela - * Fixed BOF interrupt treatment. Created dma_start routine. - * - * Revision 3.7 2001/08/10 17:19:58 daniela - * Fixed IOCTLs defines. - * - * Revision 3.6 2001/07/18 19:24:42 daniela - * Included kernel version. - * - * Revision 3.5 2001/07/05 18:38:08 daniela - * DMA transmission bug fix. - * - * Revision 3.4 2001/06/26 17:10:40 daniela - * New configuration parameters (line code, CRC calculation and clock). - * - * Revision 3.3 2001/06/22 13:13:02 regina - * MLPPP implementation - * - * Revision 3.2 2001/06/18 17:56:09 daniela - * Increased DEF_MTU and TX_QUEUE_LEN. - * - * Revision 3.1 2001/06/15 12:41:10 regina - * upping major version number - * - * Revision 1.1.1.1 2001/06/13 20:25:06 daniela - * PC300 initial CVS version (3.4.0-pre1) - * - * Revision 2.3 2001/03/05 daniela - * Created struct pc300conf, to provide the hardware information to pc300util. - * Inclusion of 'alloc_ramsize' field on structure 'pc300hw'. - * - * Revision 2.2 2000/12/22 daniela - * Structures and defines to support pc300util: statistics, status, - * loopback tests, trace. - * - * Revision 2.1 2000/09/28 ivan - * Inclusion of 'iophys' and 'iosize' fields on structure 'pc300hw', to - * allow release of I/O region at module unload. - * Changed location of include files. - * - * Revision 2.0 2000/03/27 ivan - * Added support for the PC300/TE cards. - * - * Revision 1.1 2000/01/31 ivan - * Replaced 'pc300[drv|sca].h' former PC300 driver include files. - * - * Revision 1.0 1999/12/16 ivan - * First official release. - * Inclusion of 'nchan' field on structure 'pc300hw', to allow variable - * number of ports per card. - * Inclusion of 'if_ptr' field on structure 'pc300dev'. - * - * Revision 0.6 1999/11/17 ivan - * Changed X.25-specific function names to comply with adopted convention. - * - * Revision 0.5 1999/11/16 Daniela Squassoni - * X.25 support. - * - * Revision 0.4 1999/11/15 ivan - * Inclusion of 'clock' field on structure 'pc300hw'. - * - * Revision 0.3 1999/11/10 ivan - * IOCTL name changing. - * Inclusion of driver function prototypes. - * - * Revision 0.2 1999/11/03 ivan - * Inclusion of 'tx_skb' and union 'ifu' on structure 'pc300dev'. - * - * Revision 0.1 1999/01/15 ivan - * Initial version. - * - */ - -#ifndef _PC300_H -#define _PC300_H - -#include <linux/hdlc.h> -#include "hd64572.h" -#include "pc300-falc-lh.h" - -#define PC300_PROTO_MLPPP 1 - -#define PC300_MAXCHAN 2 /* Number of channels per card */ - -#define PC300_RAMSIZE 0x40000 /* RAM window size (256Kb) */ -#define PC300_FALCSIZE 0x400 /* FALC window size (1Kb) */ - -#define PC300_OSC_CLOCK 24576000 -#define PC300_PCI_CLOCK 33000000 - -#define BD_DEF_LEN 0x0800 /* DMA buffer length (2KB) */ -#define DMA_TX_MEMSZ 0x8000 /* Total DMA Tx memory size (32KB/ch) */ -#define DMA_RX_MEMSZ 0x10000 /* Total DMA Rx memory size (64KB/ch) */ - -#define N_DMA_TX_BUF (DMA_TX_MEMSZ / BD_DEF_LEN) /* DMA Tx buffers */ -#define N_DMA_RX_BUF (DMA_RX_MEMSZ / BD_DEF_LEN) /* DMA Rx buffers */ - -/* DMA Buffer Offsets */ -#define DMA_TX_BASE ((N_DMA_TX_BUF + N_DMA_RX_BUF) * \ - PC300_MAXCHAN * sizeof(pcsca_bd_t)) -#define DMA_RX_BASE (DMA_TX_BASE + PC300_MAXCHAN*DMA_TX_MEMSZ) - -/* DMA Descriptor Offsets */ -#define DMA_TX_BD_BASE 0x0000 -#define DMA_RX_BD_BASE (DMA_TX_BD_BASE + ((PC300_MAXCHAN*DMA_TX_MEMSZ / \ - BD_DEF_LEN) * sizeof(pcsca_bd_t))) - -/* DMA Descriptor Macros */ -#define TX_BD_ADDR(chan, n) (DMA_TX_BD_BASE + \ - ((N_DMA_TX_BUF*chan) + n) * sizeof(pcsca_bd_t)) -#define RX_BD_ADDR(chan, n) (DMA_RX_BD_BASE + \ - ((N_DMA_RX_BUF*chan) + n) * sizeof(pcsca_bd_t)) - -/* Macro to access the FALC registers (TE only) */ -#define F_REG(reg, chan) (0x200*(chan) + ((reg)<<2)) - -/*************************************** - * Memory access functions/macros * - * (required to support Alpha systems) * - ***************************************/ -#define cpc_writeb(port,val) {writeb((u8)(val),(port)); mb();} -#define cpc_writew(port,val) {writew((ushort)(val),(port)); mb();} -#define cpc_writel(port,val) {writel((u32)(val),(port)); mb();} - -#define cpc_readb(port) readb(port) -#define cpc_readw(port) readw(port) -#define cpc_readl(port) readl(port) - -/****** Data Structures *****************************************************/ - -/* - * RUNTIME_9050 - PLX PCI9050-1 local configuration and shared runtime - * registers. This structure can be used to access the 9050 registers - * (memory mapped). - */ -struct RUNTIME_9050 { - u32 loc_addr_range[4]; /* 00-0Ch : Local Address Ranges */ - u32 loc_rom_range; /* 10h : Local ROM Range */ - u32 loc_addr_base[4]; /* 14-20h : Local Address Base Addrs */ - u32 loc_rom_base; /* 24h : Local ROM Base */ - u32 loc_bus_descr[4]; /* 28-34h : Local Bus Descriptors */ - u32 rom_bus_descr; /* 38h : ROM Bus Descriptor */ - u32 cs_base[4]; /* 3C-48h : Chip Select Base Addrs */ - u32 intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */ - u32 init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */ -}; - -#define PLX_9050_LINT1_ENABLE 0x01 -#define PLX_9050_LINT1_POL 0x02 -#define PLX_9050_LINT1_STATUS 0x04 -#define PLX_9050_LINT2_ENABLE 0x08 -#define PLX_9050_LINT2_POL 0x10 -#define PLX_9050_LINT2_STATUS 0x20 -#define PLX_9050_INTR_ENABLE 0x40 -#define PLX_9050_SW_INTR 0x80 - -/* Masks to access the init_ctrl PLX register */ -#define PC300_CLKSEL_MASK (0x00000004UL) -#define PC300_CHMEDIA_MASK(chan) (0x00000020UL<<(chan*3)) -#define PC300_CTYPE_MASK (0x00000800UL) - -/* CPLD Registers (base addr = falcbase, TE only) */ -/* CPLD v. 0 */ -#define CPLD_REG1 0x140 /* Chip resets, DCD/CTS status */ -#define CPLD_REG2 0x144 /* Clock enable , LED control */ -/* CPLD v. 2 or higher */ -#define CPLD_V2_REG1 0x100 /* Chip resets, DCD/CTS status */ -#define CPLD_V2_REG2 0x104 /* Clock enable , LED control */ -#define CPLD_ID_REG 0x108 /* CPLD version */ - -/* CPLD Register bit description: for the FALC bits, they should always be - set based on the channel (use (bit<<(2*ch)) to access the correct bit for - that channel) */ -#define CPLD_REG1_FALC_RESET 0x01 -#define CPLD_REG1_SCA_RESET 0x02 -#define CPLD_REG1_GLOBAL_CLK 0x08 -#define CPLD_REG1_FALC_DCD 0x10 -#define CPLD_REG1_FALC_CTS 0x20 - -#define CPLD_REG2_FALC_TX_CLK 0x01 -#define CPLD_REG2_FALC_RX_CLK 0x02 -#define CPLD_REG2_FALC_LED1 0x10 -#define CPLD_REG2_FALC_LED2 0x20 - -/* Structure with FALC-related fields (TE only) */ -#define PC300_FALC_MAXLOOP 0x0000ffff /* for falc_issue_cmd() */ - -typedef struct falc { - u8 sync; /* If true FALC is synchronized */ - u8 active; /* if TRUE then already active */ - u8 loop_active; /* if TRUE a line loopback UP was received */ - u8 loop_gen; /* if TRUE a line loopback UP was issued */ - - u8 num_channels; - u8 offset; /* 1 for T1, 0 for E1 */ - u8 full_bandwidth; - - u8 xmb_cause; - u8 multiframe_mode; - - /* Statistics */ - u16 pden; /* Pulse Density violation count */ - u16 los; /* Loss of Signal count */ - u16 losr; /* Loss of Signal recovery count */ - u16 lfa; /* Loss of frame alignment count */ - u16 farec; /* Frame Alignment Recovery count */ - u16 lmfa; /* Loss of multiframe alignment count */ - u16 ais; /* Remote Alarm indication Signal count */ - u16 sec; /* One-second timer */ - u16 es; /* Errored second */ - u16 rai; /* remote alarm received */ - u16 bec; - u16 fec; - u16 cvc; - u16 cec; - u16 ebc; - - /* Status */ - u8 red_alarm; - u8 blue_alarm; - u8 loss_fa; - u8 yellow_alarm; - u8 loss_mfa; - u8 prbs; -} falc_t; - -typedef struct falc_status { - u8 sync; /* If true FALC is synchronized */ - u8 red_alarm; - u8 blue_alarm; - u8 loss_fa; - u8 yellow_alarm; - u8 loss_mfa; - u8 prbs; -} falc_status_t; - -typedef struct rsv_x21_status { - u8 dcd; - u8 dsr; - u8 cts; - u8 rts; - u8 dtr; -} rsv_x21_status_t; - -typedef struct pc300stats { - int hw_type; - u32 line_on; - u32 line_off; - struct net_device_stats gen_stats; - falc_t te_stats; -} pc300stats_t; - -typedef struct pc300status { - int hw_type; - rsv_x21_status_t gen_status; - falc_status_t te_status; -} pc300status_t; - -typedef struct pc300loopback { - char loop_type; - char loop_on; -} pc300loopback_t; - -typedef struct pc300patterntst { - char patrntst_on; /* 0 - off; 1 - on; 2 - read num_errors */ - u16 num_errors; -} pc300patterntst_t; - -typedef struct pc300dev { - struct pc300ch *chan; - u8 trace_on; - u32 line_on; /* DCD(X.21, RSV) / sync(TE) change counters */ - u32 line_off; - char name[16]; - struct net_device *dev; -#ifdef CONFIG_PC300_MLPPP - void *cpc_tty; /* information to PC300 TTY driver */ -#endif -}pc300dev_t; - -typedef struct pc300hw { - int type; /* RSV, X21, etc. */ - int bus; /* Bus (PCI, PMC, etc.) */ - int nchan; /* number of channels */ - int irq; /* interrupt request level */ - u32 clock; /* Board clock */ - u8 cpld_id; /* CPLD ID (TE only) */ - u16 cpld_reg1; /* CPLD reg 1 (TE only) */ - u16 cpld_reg2; /* CPLD reg 2 (TE only) */ - u16 gpioc_reg; /* PLX GPIOC reg */ - u16 intctl_reg; /* PLX Int Ctrl/Status reg */ - u32 iophys; /* PLX registers I/O base */ - u32 iosize; /* PLX registers I/O size */ - u32 plxphys; /* PLX registers MMIO base (physical) */ - void __iomem * plxbase; /* PLX registers MMIO base (virtual) */ - u32 plxsize; /* PLX registers MMIO size */ - u32 scaphys; /* SCA registers MMIO base (physical) */ - void __iomem * scabase; /* SCA registers MMIO base (virtual) */ - u32 scasize; /* SCA registers MMIO size */ - u32 ramphys; /* On-board RAM MMIO base (physical) */ - void __iomem * rambase; /* On-board RAM MMIO base (virtual) */ - u32 alloc_ramsize; /* RAM MMIO size allocated by the PCI bridge */ - u32 ramsize; /* On-board RAM MMIO size */ - u32 falcphys; /* FALC registers MMIO base (physical) */ - void __iomem * falcbase;/* FALC registers MMIO base (virtual) */ - u32 falcsize; /* FALC registers MMIO size */ -} pc300hw_t; - -typedef struct pc300chconf { - sync_serial_settings phys_settings; /* Clock type/rate (in bps), - loopback mode */ - raw_hdlc_proto proto_settings; /* Encoding, parity (CRC) */ - u32 media; /* HW media (RS232, V.35, etc.) */ - u32 proto; /* Protocol (PPP, X.25, etc.) */ - - /* TE-specific parameters */ - u8 lcode; /* Line Code (AMI, B8ZS, etc.) */ - u8 fr_mode; /* Frame Mode (ESF, D4, etc.) */ - u8 lbo; /* Line Build Out */ - u8 rx_sens; /* Rx Sensitivity (long- or short-haul) */ - u32 tslot_bitmap; /* bit[i]=1 => timeslot _i_ is active */ -} pc300chconf_t; - -typedef struct pc300ch { - struct pc300 *card; - int channel; - pc300dev_t d; - pc300chconf_t conf; - u8 tx_first_bd; /* First TX DMA block descr. w/ data */ - u8 tx_next_bd; /* Next free TX DMA block descriptor */ - u8 rx_first_bd; /* First free RX DMA block descriptor */ - u8 rx_last_bd; /* Last free RX DMA block descriptor */ - u8 nfree_tx_bd; /* Number of free TX DMA block descriptors */ - falc_t falc; /* FALC structure (TE only) */ -} pc300ch_t; - -typedef struct pc300 { - pc300hw_t hw; /* hardware config. */ - pc300ch_t chan[PC300_MAXCHAN]; - spinlock_t card_lock; -} pc300_t; - -typedef struct pc300conf { - pc300hw_t hw; - pc300chconf_t conf; -} pc300conf_t; - -/* DEV ioctl() commands */ -#define N_SPPP_IOCTLS 2 - -enum pc300_ioctl_cmds { - SIOCCPCRESERVED = (SIOCDEVPRIVATE + N_SPPP_IOCTLS), - SIOCGPC300CONF, - SIOCSPC300CONF, - SIOCGPC300STATUS, - SIOCGPC300FALCSTATUS, - SIOCGPC300UTILSTATS, - SIOCGPC300UTILSTATUS, - SIOCSPC300TRACE, - SIOCSPC300LOOPBACK, - SIOCSPC300PATTERNTEST, -}; - -/* Loopback types - PC300/TE boards */ -enum pc300_loopback_cmds { - PC300LOCLOOP = 1, - PC300REMLOOP, - PC300PAYLOADLOOP, - PC300GENLOOPUP, - PC300GENLOOPDOWN, -}; - -/* Control Constant Definitions */ -#define PC300_RSV 0x01 -#define PC300_X21 0x02 -#define PC300_TE 0x03 - -#define PC300_PCI 0x00 -#define PC300_PMC 0x01 - -#define PC300_LC_AMI 0x01 -#define PC300_LC_B8ZS 0x02 -#define PC300_LC_NRZ 0x03 -#define PC300_LC_HDB3 0x04 - -/* Framing (T1) */ -#define PC300_FR_ESF 0x01 -#define PC300_FR_D4 0x02 -#define PC300_FR_ESF_JAPAN 0x03 - -/* Framing (E1) */ -#define PC300_FR_MF_CRC4 0x04 -#define PC300_FR_MF_NON_CRC4 0x05 -#define PC300_FR_UNFRAMED 0x06 - -#define PC300_LBO_0_DB 0x00 -#define PC300_LBO_7_5_DB 0x01 -#define PC300_LBO_15_DB 0x02 -#define PC300_LBO_22_5_DB 0x03 - -#define PC300_RX_SENS_SH 0x01 -#define PC300_RX_SENS_LH 0x02 - -#define PC300_TX_TIMEOUT (2*HZ) -#define PC300_TX_QUEUE_LEN 100 -#define PC300_DEF_MTU 1600 - -/* Function Prototypes */ -int cpc_open(struct net_device *dev); - -#endif /* _PC300_H */ diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c deleted file mode 100644 index cb0f8d932b0c..000000000000 --- a/drivers/net/wan/pc300_drv.c +++ /dev/null @@ -1,3670 +0,0 @@ -#define USE_PCI_CLOCK -static const char rcsid[] = -"Revision: 3.4.5 Date: 2002/03/07 "; - -/* - * pc300.c Cyclades-PC300(tm) Driver. - * - * Author: Ivan Passos <ivan@cyclades.com> - * Maintainer: PC300 Maintainer <pc300@cyclades.com> - * - * Copyright: (c) 1999-2003 Cyclades Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Using tabstop = 4. - * - * $Log: pc300_drv.c,v $ - * Revision 3.23 2002/03/20 13:58:40 henrique - * Fixed ortographic mistakes - * - * Revision 3.22 2002/03/13 16:56:56 henrique - * Take out the debug messages - * - * Revision 3.21 2002/03/07 14:17:09 henrique - * License data fixed - * - * Revision 3.20 2002/01/17 17:58:52 ivan - * Support for PC300-TE/M (PMC). - * - * Revision 3.19 2002/01/03 17:08:47 daniela - * Enables DMA reception when the SCA-II disables it improperly. - * - * Revision 3.18 2001/12/03 18:47:50 daniela - * Esthetic changes. - * - * Revision 3.17 2001/10/19 16:50:13 henrique - * Patch to kernel 2.4.12 and new generic hdlc. - * - * Revision 3.16 2001/10/16 15:12:31 regina - * clear statistics - * - * Revision 3.11 to 3.15 2001/10/11 20:26:04 daniela - * More DMA fixes for noisy lines. - * Return the size of bad frames in dma_get_rx_frame_size, so that the Rx buffer - * descriptors can be cleaned by dma_buf_read (called in cpc_net_rx). - * Renamed dma_start routine to rx_dma_start. Improved Rx statistics. - * Fixed BOF interrupt treatment. Created dma_start routine. - * Changed min and max to cpc_min and cpc_max. - * - * Revision 3.10 2001/08/06 12:01:51 regina - * Fixed problem in DSR_DE bit. - * - * Revision 3.9 2001/07/18 19:27:26 daniela - * Added some history comments. - * - * Revision 3.8 2001/07/12 13:11:19 regina - * bug fix - DCD-OFF in pc300 tty driver - * - * Revision 3.3 to 3.7 2001/07/06 15:00:20 daniela - * Removing kernel 2.4.3 and previous support. - * DMA transmission bug fix. - * MTU check in cpc_net_rx fixed. - * Boot messages reviewed. - * New configuration parameters (line code, CRC calculation and clock). - * - * Revision 3.2 2001/06/22 13:13:02 regina - * MLPPP implementation. Changed the header of message trace to include - * the device name. New format : "hdlcX[R/T]: ". - * Default configuration changed. - * - * Revision 3.1 2001/06/15 regina - * in cpc_queue_xmit, netif_stop_queue is called if don't have free descriptor - * upping major version number - * - * Revision 1.1.1.1 2001/06/13 20:25:04 daniela - * PC300 initial CVS version (3.4.0-pre1) - * - * Revision 3.0.1.2 2001/06/08 daniela - * Did some changes in the DMA programming implementation to avoid the - * occurrence of a SCA-II bug when CDA is accessed during a DMA transfer. - * - * Revision 3.0.1.1 2001/05/02 daniela - * Added kernel 2.4.3 support. - * - * Revision 3.0.1.0 2001/03/13 daniela, henrique - * Added Frame Relay Support. - * Driver now uses HDLC generic driver to provide protocol support. - * - * Revision 3.0.0.8 2001/03/02 daniela - * Fixed ram size detection. - * Changed SIOCGPC300CONF ioctl, to give hw information to pc300util. - * - * Revision 3.0.0.7 2001/02/23 daniela - * netif_stop_queue called before the SCA-II transmition commands in - * cpc_queue_xmit, and with interrupts disabled to avoid race conditions with - * transmition interrupts. - * Fixed falc_check_status for Unframed E1. - * - * Revision 3.0.0.6 2000/12/13 daniela - * Implemented pc300util support: trace, statistics, status and loopback - * tests for the PC300 TE boards. - * - * Revision 3.0.0.5 2000/12/12 ivan - * Added support for Unframed E1. - * Implemented monitor mode. - * Fixed DCD sensitivity on the second channel. - * Driver now complies with new PCI kernel architecture. - * - * Revision 3.0.0.4 2000/09/28 ivan - * Implemented DCD sensitivity. - * Moved hardware-specific open to the end of cpc_open, to avoid race - * conditions with early reception interrupts. - * Included code for [request|release]_mem_region(). - * Changed location of pc300.h . - * Minor code revision (contrib. of Jeff Garzik). - * - * Revision 3.0.0.3 2000/07/03 ivan - * Previous bugfix for the framing errors with external clock made X21 - * boards stop working. This version fixes it. - * - * Revision 3.0.0.2 2000/06/23 ivan - * Revisited cpc_queue_xmit to prevent race conditions on Tx DMA buffer - * handling when Tx timeouts occur. - * Revisited Rx statistics. - * Fixed a bug in the SCA-II programming that would cause framing errors - * when external clock was configured. - * - * Revision 3.0.0.1 2000/05/26 ivan - * Added logic in the SCA interrupt handler so that no board can monopolize - * the driver. - * Request PLX I/O region, although driver doesn't use it, to avoid - * problems with other drivers accessing it. - * - * Revision 3.0.0.0 2000/05/15 ivan - * Did some changes in the DMA programming implementation to avoid the - * occurrence of a SCA-II bug in the second channel. - * Implemented workaround for PLX9050 bug that would cause a system lockup - * in certain systems, depending on the MMIO addresses allocated to the - * board. - * Fixed the FALC chip programming to avoid synchronization problems in the - * second channel (TE only). - * Implemented a cleaner and faster Tx DMA descriptor cleanup procedure in - * cpc_queue_xmit(). - * Changed the built-in driver implementation so that the driver can use the - * general 'hdlcN' naming convention instead of proprietary device names. - * Driver load messages are now device-centric, instead of board-centric. - * Dynamic allocation of net_device structures. - * Code is now compliant with the new module interface (module_[init|exit]). - * Make use of the PCI helper functions to access PCI resources. - * - * Revision 2.0.0.0 2000/04/15 ivan - * Added support for the PC300/TE boards (T1/FT1/E1/FE1). - * - * Revision 1.1.0.0 2000/02/28 ivan - * Major changes in the driver architecture. - * Softnet compliancy implemented. - * Driver now reports physical instead of virtual memory addresses. - * Added cpc_change_mtu function. - * - * Revision 1.0.0.0 1999/12/16 ivan - * First official release. - * Support for 1- and 2-channel boards (which use distinct PCI Device ID's). - * Support for monolythic installation (i.e., drv built into the kernel). - * X.25 additional checking when lapb_[dis]connect_request returns an error. - * SCA programming now covers X.21 as well. - * - * Revision 0.3.1.0 1999/11/18 ivan - * Made X.25 support configuration-dependent (as it depends on external - * modules to work). - * Changed X.25-specific function names to comply with adopted convention. - * Fixed typos in X.25 functions that would cause compile errors (Daniela). - * Fixed bug in ch_config that would disable interrupts on a previously - * enabled channel if the other channel on the same board was enabled later. - * - * Revision 0.3.0.0 1999/11/16 daniela - * X.25 support. - * - * Revision 0.2.3.0 1999/11/15 ivan - * Function cpc_ch_status now provides more detailed information. - * Added support for X.21 clock configuration. - * Changed TNR1 setting in order to prevent Tx FIFO overaccesses by the SCA. - * Now using PCI clock instead of internal oscillator clock for the SCA. - * - * Revision 0.2.2.0 1999/11/10 ivan - * Changed the *_dma_buf_check functions so that they would print only - * the useful info instead of the whole buffer descriptor bank. - * Fixed bug in cpc_queue_xmit that would eventually crash the system - * in case of a packet drop. - * Implemented TX underrun handling. - * Improved SCA fine tuning to boost up its performance. - * - * Revision 0.2.1.0 1999/11/03 ivan - * Added functions *dma_buf_pt_init to allow independent initialization - * of the next-descr. and DMA buffer pointers on the DMA descriptors. - * Kernel buffer release and tbusy clearing is now done in the interrupt - * handler. - * Fixed bug in cpc_open that would cause an interface reopen to fail. - * Added a protocol-specific code section in cpc_net_rx. - * Removed printk level defs (they might be added back after the beta phase). - * - * Revision 0.2.0.0 1999/10/28 ivan - * Revisited the code so that new protocols can be easily added / supported. - * - * Revision 0.1.0.1 1999/10/20 ivan - * Mostly "esthetic" changes. - * - * Revision 0.1.0.0 1999/10/11 ivan - * Initial version. - * - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/ioport.h> -#include <linux/pci.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/net.h> -#include <linux/skbuff.h> -#include <linux/if_arp.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/spinlock.h> -#include <linux/if.h> -#include <linux/slab.h> -#include <net/arp.h> - -#include <asm/io.h> -#include <asm/uaccess.h> - -#include "pc300.h" - -#define CPC_LOCK(card,flags) \ - do { \ - spin_lock_irqsave(&card->card_lock, flags); \ - } while (0) - -#define CPC_UNLOCK(card,flags) \ - do { \ - spin_unlock_irqrestore(&card->card_lock, flags); \ - } while (0) - -#undef PC300_DEBUG_PCI -#undef PC300_DEBUG_INTR -#undef PC300_DEBUG_TX -#undef PC300_DEBUG_RX -#undef PC300_DEBUG_OTHER - -static DEFINE_PCI_DEVICE_TABLE(cpc_pci_dev_id) = { - /* PC300/RSV or PC300/X21, 2 chan */ - {0x120e, 0x300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x300}, - /* PC300/RSV or PC300/X21, 1 chan */ - {0x120e, 0x301, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x301}, - /* PC300/TE, 2 chan */ - {0x120e, 0x310, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x310}, - /* PC300/TE, 1 chan */ - {0x120e, 0x311, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x311}, - /* PC300/TE-M, 2 chan */ - {0x120e, 0x320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x320}, - /* PC300/TE-M, 1 chan */ - {0x120e, 0x321, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0x321}, - /* End of table */ - {0,}, -}; -MODULE_DEVICE_TABLE(pci, cpc_pci_dev_id); - -#ifndef cpc_min -#define cpc_min(a,b) (((a)<(b))?(a):(b)) -#endif -#ifndef cpc_max -#define cpc_max(a,b) (((a)>(b))?(a):(b)) -#endif - -/* prototypes */ -static void tx_dma_buf_pt_init(pc300_t *, int); -static void tx_dma_buf_init(pc300_t *, int); -static void rx_dma_buf_pt_init(pc300_t *, int); -static void rx_dma_buf_init(pc300_t *, int); -static void tx_dma_buf_check(pc300_t *, int); -static void rx_dma_buf_check(pc300_t *, int); -static irqreturn_t cpc_intr(int, void *); -static int clock_rate_calc(u32, u32, int *); -static u32 detect_ram(pc300_t *); -static void plx_init(pc300_t *); -static void cpc_trace(struct net_device *, struct sk_buff *, char); -static int cpc_attach(struct net_device *, unsigned short, unsigned short); -static int cpc_close(struct net_device *dev); - -#ifdef CONFIG_PC300_MLPPP -void cpc_tty_init(pc300dev_t * dev); -void cpc_tty_unregister_service(pc300dev_t * pc300dev); -void cpc_tty_receive(pc300dev_t * pc300dev); -void cpc_tty_trigger_poll(pc300dev_t * pc300dev); -#endif - -/************************/ -/*** DMA Routines ***/ -/************************/ -static void tx_dma_buf_pt_init(pc300_t * card, int ch) -{ - int i; - int ch_factor = ch * N_DMA_TX_BUF; - volatile pcsca_bd_t __iomem *ptdescr = (card->hw.rambase - + DMA_TX_BD_BASE + ch_factor * sizeof(pcsca_bd_t)); - - for (i = 0; i < N_DMA_TX_BUF; i++, ptdescr++) { - cpc_writel(&ptdescr->next, (u32)(DMA_TX_BD_BASE + - (ch_factor + ((i + 1) & (N_DMA_TX_BUF - 1))) * sizeof(pcsca_bd_t))); - cpc_writel(&ptdescr->ptbuf, - (u32)(DMA_TX_BASE + (ch_factor + i) * BD_DEF_LEN)); - } -} - -static void tx_dma_buf_init(pc300_t * card, int ch) -{ - int i; - int ch_factor = ch * N_DMA_TX_BUF; - volatile pcsca_bd_t __iomem *ptdescr = (card->hw.rambase - + DMA_TX_BD_BASE + ch_factor * sizeof(pcsca_bd_t)); - - for (i = 0; i < N_DMA_TX_BUF; i++, ptdescr++) { - memset_io(ptdescr, 0, sizeof(pcsca_bd_t)); - cpc_writew(&ptdescr->len, 0); - cpc_writeb(&ptdescr->status, DST_OSB); - } - tx_dma_buf_pt_init(card, ch); -} - -static void rx_dma_buf_pt_init(pc300_t * card, int ch) -{ - int i; - int ch_factor = ch * N_DMA_RX_BUF; - volatile pcsca_bd_t __iomem *ptdescr = (card->hw.rambase - + DMA_RX_BD_BASE + ch_factor * sizeof(pcsca_bd_t)); - - for (i = 0; i < N_DMA_RX_BUF; i++, ptdescr++) { - cpc_writel(&ptdescr->next, (u32)(DMA_RX_BD_BASE + - (ch_factor + ((i + 1) & (N_DMA_RX_BUF - 1))) * sizeof(pcsca_bd_t))); - cpc_writel(&ptdescr->ptbuf, - (u32)(DMA_RX_BASE + (ch_factor + i) * BD_DEF_LEN)); - } -} - -static void rx_dma_buf_init(pc300_t * card, int ch) -{ - int i; - int ch_factor = ch * N_DMA_RX_BUF; - volatile pcsca_bd_t __iomem *ptdescr = (card->hw.rambase - + DMA_RX_BD_BASE + ch_factor * sizeof(pcsca_bd_t)); - - for (i = 0; i < N_DMA_RX_BUF; i++, ptdescr++) { - memset_io(ptdescr, 0, sizeof(pcsca_bd_t)); - cpc_writew(&ptdescr->len, 0); - cpc_writeb(&ptdescr->status, 0); - } - rx_dma_buf_pt_init(card, ch); -} - -static void tx_dma_buf_check(pc300_t * card, int ch) -{ - volatile pcsca_bd_t __iomem *ptdescr; - int i; - u16 first_bd = card->chan[ch].tx_first_bd; - u16 next_bd = card->chan[ch].tx_next_bd; - - printk("#CH%d: f_bd = %d(0x%08zx), n_bd = %d(0x%08zx)\n", ch, - first_bd, TX_BD_ADDR(ch, first_bd), - next_bd, TX_BD_ADDR(ch, next_bd)); - for (i = first_bd, - ptdescr = (card->hw.rambase + TX_BD_ADDR(ch, first_bd)); - i != ((next_bd + 1) & (N_DMA_TX_BUF - 1)); - i = (i + 1) & (N_DMA_TX_BUF - 1), - ptdescr = (card->hw.rambase + TX_BD_ADDR(ch, i))) { - printk("\n CH%d TX%d: next=0x%x, ptbuf=0x%x, ST=0x%x, len=%d", - ch, i, cpc_readl(&ptdescr->next), - cpc_readl(&ptdescr->ptbuf), - cpc_readb(&ptdescr->status), cpc_readw(&ptdescr->len)); - } - printk("\n"); -} - -#ifdef PC300_DEBUG_OTHER -/* Show all TX buffer descriptors */ -static void tx1_dma_buf_check(pc300_t * card, int ch) -{ - volatile pcsca_bd_t __iomem *ptdescr; - int i; - u16 first_bd = card->chan[ch].tx_first_bd; - u16 next_bd = card->chan[ch].tx_next_bd; - u32 scabase = card->hw.scabase; - - printk ("\nnfree_tx_bd = %d\n", card->chan[ch].nfree_tx_bd); - printk("#CH%d: f_bd = %d(0x%08x), n_bd = %d(0x%08x)\n", ch, - first_bd, TX_BD_ADDR(ch, first_bd), - next_bd, TX_BD_ADDR(ch, next_bd)); - printk("TX_CDA=0x%08x, TX_EDA=0x%08x\n", - cpc_readl(scabase + DTX_REG(CDAL, ch)), - cpc_readl(scabase + DTX_REG(EDAL, ch))); - for (i = 0; i < N_DMA_TX_BUF; i++) { - ptdescr = (card->hw.rambase + TX_BD_ADDR(ch, i)); - printk("\n CH%d TX%d: next=0x%x, ptbuf=0x%x, ST=0x%x, len=%d", - ch, i, cpc_readl(&ptdescr->next), - cpc_readl(&ptdescr->ptbuf), - cpc_readb(&ptdescr->status), cpc_readw(&ptdescr->len)); - } - printk("\n"); -} -#endif - -static void rx_dma_buf_check(pc300_t * card, int ch) -{ - volatile pcsca_bd_t __iomem *ptdescr; - int i; - u16 first_bd = card->chan[ch].rx_first_bd; - u16 last_bd = card->chan[ch].rx_last_bd; - int ch_factor; - - ch_factor = ch * N_DMA_RX_BUF; - printk("#CH%d: f_bd = %d, l_bd = %d\n", ch, first_bd, last_bd); - for (i = 0, ptdescr = (card->hw.rambase + - DMA_RX_BD_BASE + ch_factor * sizeof(pcsca_bd_t)); - i < N_DMA_RX_BUF; i++, ptdescr++) { - if (cpc_readb(&ptdescr->status) & DST_OSB) - printk ("\n CH%d RX%d: next=0x%x, ptbuf=0x%x, ST=0x%x, len=%d", - ch, i, cpc_readl(&ptdescr->next), - cpc_readl(&ptdescr->ptbuf), - cpc_readb(&ptdescr->status), - cpc_readw(&ptdescr->len)); - } - printk("\n"); -} - -static int dma_get_rx_frame_size(pc300_t * card, int ch) -{ - volatile pcsca_bd_t __iomem *ptdescr; - u16 first_bd = card->chan[ch].rx_first_bd; - int rcvd = 0; - volatile u8 status; - - ptdescr = (card->hw.rambase + RX_BD_ADDR(ch, first_bd)); - while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) { - rcvd += cpc_readw(&ptdescr->len); - first_bd = (first_bd + 1) & (N_DMA_RX_BUF - 1); - if ((status & DST_EOM) || (first_bd == card->chan[ch].rx_last_bd)) { - /* Return the size of a good frame or incomplete bad frame - * (dma_buf_read will clean the buffer descriptors in this case). */ - return rcvd; - } - ptdescr = (card->hw.rambase + cpc_readl(&ptdescr->next)); - } - return -1; -} - -/* - * dma_buf_write: writes a frame to the Tx DMA buffers - * NOTE: this function writes one frame at a time. - */ -static int dma_buf_write(pc300_t *card, int ch, u8 *ptdata, int len) -{ - int i, nchar; - volatile pcsca_bd_t __iomem *ptdescr; - int tosend = len; - u8 nbuf = ((len - 1) / BD_DEF_LEN) + 1; - - if (nbuf >= card->chan[ch].nfree_tx_bd) { - return -ENOMEM; - } - - for (i = 0; i < nbuf; i++) { - ptdescr = (card->hw.rambase + - TX_BD_ADDR(ch, card->chan[ch].tx_next_bd)); - nchar = cpc_min(BD_DEF_LEN, tosend); - if (cpc_readb(&ptdescr->status) & DST_OSB) { - memcpy_toio((card->hw.rambase + cpc_readl(&ptdescr->ptbuf)), - &ptdata[len - tosend], nchar); - cpc_writew(&ptdescr->len, nchar); - card->chan[ch].nfree_tx_bd--; - if ((i + 1) == nbuf) { - /* This must be the last BD to be used */ - cpc_writeb(&ptdescr->status, DST_EOM); - } else { - cpc_writeb(&ptdescr->status, 0); - } - } else { - return -ENOMEM; - } - tosend -= nchar; - card->chan[ch].tx_next_bd = - (card->chan[ch].tx_next_bd + 1) & (N_DMA_TX_BUF - 1); - } - /* If it gets to here, it means we have sent the whole frame */ - return 0; -} - -/* - * dma_buf_read: reads a frame from the Rx DMA buffers - * NOTE: this function reads one frame at a time. - */ -static int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb) -{ - int nchar; - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - volatile pcsca_bd_t __iomem *ptdescr; - int rcvd = 0; - volatile u8 status; - - ptdescr = (card->hw.rambase + - RX_BD_ADDR(ch, chan->rx_first_bd)); - while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) { - nchar = cpc_readw(&ptdescr->len); - if ((status & (DST_OVR | DST_CRC | DST_RBIT | DST_SHRT | DST_ABT)) || - (nchar > BD_DEF_LEN)) { - - if (nchar > BD_DEF_LEN) - status |= DST_RBIT; - rcvd = -status; - /* Discard remaining descriptors used by the bad frame */ - while (chan->rx_first_bd != chan->rx_last_bd) { - cpc_writeb(&ptdescr->status, 0); - chan->rx_first_bd = (chan->rx_first_bd+1) & (N_DMA_RX_BUF-1); - if (status & DST_EOM) - break; - ptdescr = (card->hw.rambase + - cpc_readl(&ptdescr->next)); - status = cpc_readb(&ptdescr->status); - } - break; - } - if (nchar != 0) { - if (skb) { - memcpy_fromio(skb_put(skb, nchar), - (card->hw.rambase+cpc_readl(&ptdescr->ptbuf)),nchar); - } - rcvd += nchar; - } - cpc_writeb(&ptdescr->status, 0); - cpc_writeb(&ptdescr->len, 0); - chan->rx_first_bd = (chan->rx_first_bd + 1) & (N_DMA_RX_BUF - 1); - - if (status & DST_EOM) - break; - - ptdescr = (card->hw.rambase + cpc_readl(&ptdescr->next)); - } - - if (rcvd != 0) { - /* Update pointer */ - chan->rx_last_bd = (chan->rx_first_bd - 1) & (N_DMA_RX_BUF - 1); - /* Update EDA */ - cpc_writel(card->hw.scabase + DRX_REG(EDAL, ch), - RX_BD_ADDR(ch, chan->rx_last_bd)); - } - return rcvd; -} - -static void tx_dma_stop(pc300_t * card, int ch) -{ - void __iomem *scabase = card->hw.scabase; - u8 drr_ena_bit = 1 << (5 + 2 * ch); - u8 drr_rst_bit = 1 << (1 + 2 * ch); - - /* Disable DMA */ - cpc_writeb(scabase + DRR, drr_ena_bit); - cpc_writeb(scabase + DRR, drr_rst_bit & ~drr_ena_bit); -} - -static void rx_dma_stop(pc300_t * card, int ch) -{ - void __iomem *scabase = card->hw.scabase; - u8 drr_ena_bit = 1 << (4 + 2 * ch); - u8 drr_rst_bit = 1 << (2 * ch); - - /* Disable DMA */ - cpc_writeb(scabase + DRR, drr_ena_bit); - cpc_writeb(scabase + DRR, drr_rst_bit & ~drr_ena_bit); -} - -static void rx_dma_start(pc300_t * card, int ch) -{ - void __iomem *scabase = card->hw.scabase; - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - - /* Start DMA */ - cpc_writel(scabase + DRX_REG(CDAL, ch), - RX_BD_ADDR(ch, chan->rx_first_bd)); - if (cpc_readl(scabase + DRX_REG(CDAL,ch)) != - RX_BD_ADDR(ch, chan->rx_first_bd)) { - cpc_writel(scabase + DRX_REG(CDAL, ch), - RX_BD_ADDR(ch, chan->rx_first_bd)); - } - cpc_writel(scabase + DRX_REG(EDAL, ch), - RX_BD_ADDR(ch, chan->rx_last_bd)); - cpc_writew(scabase + DRX_REG(BFLL, ch), BD_DEF_LEN); - cpc_writeb(scabase + DSR_RX(ch), DSR_DE); - if (!(cpc_readb(scabase + DSR_RX(ch)) & DSR_DE)) { - cpc_writeb(scabase + DSR_RX(ch), DSR_DE); - } -} - -/*************************/ -/*** FALC Routines ***/ -/*************************/ -static void falc_issue_cmd(pc300_t *card, int ch, u8 cmd) -{ - void __iomem *falcbase = card->hw.falcbase; - unsigned long i = 0; - - while (cpc_readb(falcbase + F_REG(SIS, ch)) & SIS_CEC) { - if (i++ >= PC300_FALC_MAXLOOP) { - printk("%s: FALC command locked(cmd=0x%x).\n", - card->chan[ch].d.name, cmd); - break; - } - } - cpc_writeb(falcbase + F_REG(CMDR, ch), cmd); -} - -static void falc_intr_enable(pc300_t * card, int ch) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; - falc_t *pfalc = (falc_t *) & chan->falc; - void __iomem *falcbase = card->hw.falcbase; - - /* Interrupt pins are open-drain */ - cpc_writeb(falcbase + F_REG(IPC, ch), - cpc_readb(falcbase + F_REG(IPC, ch)) & ~IPC_IC0); - /* Conters updated each second */ - cpc_writeb(falcbase + F_REG(FMR1, ch), - cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_ECM); - /* Enable SEC and ES interrupts */ - cpc_writeb(falcbase + F_REG(IMR3, ch), - cpc_readb(falcbase + F_REG(IMR3, ch)) & ~(IMR3_SEC | IMR3_ES)); - if (conf->fr_mode == PC300_FR_UNFRAMED) { - cpc_writeb(falcbase + F_REG(IMR4, ch), - cpc_readb(falcbase + F_REG(IMR4, ch)) & ~(IMR4_LOS)); - } else { - cpc_writeb(falcbase + F_REG(IMR4, ch), - cpc_readb(falcbase + F_REG(IMR4, ch)) & - ~(IMR4_LFA | IMR4_AIS | IMR4_LOS | IMR4_SLIP)); - } - if (conf->media == IF_IFACE_T1) { - cpc_writeb(falcbase + F_REG(IMR3, ch), - cpc_readb(falcbase + F_REG(IMR3, ch)) & ~IMR3_LLBSC); - } else { - cpc_writeb(falcbase + F_REG(IPC, ch), - cpc_readb(falcbase + F_REG(IPC, ch)) | IPC_SCI); - if (conf->fr_mode == PC300_FR_UNFRAMED) { - cpc_writeb(falcbase + F_REG(IMR2, ch), - cpc_readb(falcbase + F_REG(IMR2, ch)) & ~(IMR2_LOS)); - } else { - cpc_writeb(falcbase + F_REG(IMR2, ch), - cpc_readb(falcbase + F_REG(IMR2, ch)) & - ~(IMR2_FAR | IMR2_LFA | IMR2_AIS | IMR2_LOS)); - if (pfalc->multiframe_mode) { - cpc_writeb(falcbase + F_REG(IMR2, ch), - cpc_readb(falcbase + F_REG(IMR2, ch)) & - ~(IMR2_T400MS | IMR2_MFAR)); - } else { - cpc_writeb(falcbase + F_REG(IMR2, ch), - cpc_readb(falcbase + F_REG(IMR2, ch)) | - IMR2_T400MS | IMR2_MFAR); - } - } - } -} - -static void falc_open_timeslot(pc300_t * card, int ch, int timeslot) -{ - void __iomem *falcbase = card->hw.falcbase; - u8 tshf = card->chan[ch].falc.offset; - - cpc_writeb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch), - cpc_readb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch)) & - ~(0x80 >> ((timeslot - tshf) & 0x07))); - cpc_writeb(falcbase + F_REG((TTR1 + timeslot / 8), ch), - cpc_readb(falcbase + F_REG((TTR1 + timeslot / 8), ch)) | - (0x80 >> (timeslot & 0x07))); - cpc_writeb(falcbase + F_REG((RTR1 + timeslot / 8), ch), - cpc_readb(falcbase + F_REG((RTR1 + timeslot / 8), ch)) | - (0x80 >> (timeslot & 0x07))); -} - -static void falc_close_timeslot(pc300_t * card, int ch, int timeslot) -{ - void __iomem *falcbase = card->hw.falcbase; - u8 tshf = card->chan[ch].falc.offset; - - cpc_writeb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch), - cpc_readb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch)) | - (0x80 >> ((timeslot - tshf) & 0x07))); - cpc_writeb(falcbase + F_REG((TTR1 + timeslot / 8), ch), - cpc_readb(falcbase + F_REG((TTR1 + timeslot / 8), ch)) & - ~(0x80 >> (timeslot & 0x07))); - cpc_writeb(falcbase + F_REG((RTR1 + timeslot / 8), ch), - cpc_readb(falcbase + F_REG((RTR1 + timeslot / 8), ch)) & - ~(0x80 >> (timeslot & 0x07))); -} - -static void falc_close_all_timeslots(pc300_t * card, int ch) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; - void __iomem *falcbase = card->hw.falcbase; - - cpc_writeb(falcbase + F_REG(ICB1, ch), 0xff); - cpc_writeb(falcbase + F_REG(TTR1, ch), 0); - cpc_writeb(falcbase + F_REG(RTR1, ch), 0); - cpc_writeb(falcbase + F_REG(ICB2, ch), 0xff); - cpc_writeb(falcbase + F_REG(TTR2, ch), 0); - cpc_writeb(falcbase + F_REG(RTR2, ch), 0); - cpc_writeb(falcbase + F_REG(ICB3, ch), 0xff); - cpc_writeb(falcbase + F_REG(TTR3, ch), 0); - cpc_writeb(falcbase + F_REG(RTR3, ch), 0); - if (conf->media == IF_IFACE_E1) { - cpc_writeb(falcbase + F_REG(ICB4, ch), 0xff); - cpc_writeb(falcbase + F_REG(TTR4, ch), 0); - cpc_writeb(falcbase + F_REG(RTR4, ch), 0); - } -} - -static void falc_open_all_timeslots(pc300_t * card, int ch) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; - void __iomem *falcbase = card->hw.falcbase; - - cpc_writeb(falcbase + F_REG(ICB1, ch), 0); - if (conf->fr_mode == PC300_FR_UNFRAMED) { - cpc_writeb(falcbase + F_REG(TTR1, ch), 0xff); - cpc_writeb(falcbase + F_REG(RTR1, ch), 0xff); - } else { - /* Timeslot 0 is never enabled */ - cpc_writeb(falcbase + F_REG(TTR1, ch), 0x7f); - cpc_writeb(falcbase + F_REG(RTR1, ch), 0x7f); - } - cpc_writeb(falcbase + F_REG(ICB2, ch), 0); - cpc_writeb(falcbase + F_REG(TTR2, ch), 0xff); - cpc_writeb(falcbase + F_REG(RTR2, ch), 0xff); - cpc_writeb(falcbase + F_REG(ICB3, ch), 0); - cpc_writeb(falcbase + F_REG(TTR3, ch), 0xff); - cpc_writeb(falcbase + F_REG(RTR3, ch), 0xff); - if (conf->media == IF_IFACE_E1) { - cpc_writeb(falcbase + F_REG(ICB4, ch), 0); - cpc_writeb(falcbase + F_REG(TTR4, ch), 0xff); - cpc_writeb(falcbase + F_REG(RTR4, ch), 0xff); - } else { - cpc_writeb(falcbase + F_REG(ICB4, ch), 0xff); - cpc_writeb(falcbase + F_REG(TTR4, ch), 0x80); - cpc_writeb(falcbase + F_REG(RTR4, ch), 0x80); - } -} - -static void falc_init_timeslot(pc300_t * card, int ch) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; - falc_t *pfalc = (falc_t *) & chan->falc; - int tslot; - - for (tslot = 0; tslot < pfalc->num_channels; tslot++) { - if (conf->tslot_bitmap & (1 << tslot)) { - // Channel enabled - falc_open_timeslot(card, ch, tslot + 1); - } else { - // Channel disabled - falc_close_timeslot(card, ch, tslot + 1); - } - } -} - -static void falc_enable_comm(pc300_t * card, int ch) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - falc_t *pfalc = (falc_t *) & chan->falc; - - if (pfalc->full_bandwidth) { - falc_open_all_timeslots(card, ch); - } else { - falc_init_timeslot(card, ch); - } - // CTS/DCD ON - cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, - cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) & - ~((CPLD_REG1_FALC_DCD | CPLD_REG1_FALC_CTS) << (2 * ch))); -} - -static void falc_disable_comm(pc300_t * card, int ch) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - falc_t *pfalc = (falc_t *) & chan->falc; - - if (pfalc->loop_active != 2) { - falc_close_all_timeslots(card, ch); - } - // CTS/DCD OFF - cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, - cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) | - ((CPLD_REG1_FALC_DCD | CPLD_REG1_FALC_CTS) << (2 * ch))); -} - -static void falc_init_t1(pc300_t * card, int ch) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; - falc_t *pfalc = (falc_t *) & chan->falc; - void __iomem *falcbase = card->hw.falcbase; - u8 dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0); - - /* Switch to T1 mode (PCM 24) */ - cpc_writeb(falcbase + F_REG(FMR1, ch), FMR1_PMOD); - - /* Wait 20 us for setup */ - udelay(20); - - /* Transmit Buffer Size (1 frame) */ - cpc_writeb(falcbase + F_REG(SIC1, ch), SIC1_XBS0); - - /* Clock mode */ - if (conf->phys_settings.clock_type == CLOCK_INT) { /* Master mode */ - cpc_writeb(falcbase + F_REG(LIM0, ch), - cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_MAS); - } else { /* Slave mode */ - cpc_writeb(falcbase + F_REG(LIM0, ch), - cpc_readb(falcbase + F_REG(LIM0, ch)) & ~LIM0_MAS); - cpc_writeb(falcbase + F_REG(LOOP, ch), - cpc_readb(falcbase + F_REG(LOOP, ch)) & ~LOOP_RTM); - } - - cpc_writeb(falcbase + F_REG(IPC, ch), IPC_SCI); - cpc_writeb(falcbase + F_REG(FMR0, ch), - cpc_readb(falcbase + F_REG(FMR0, ch)) & - ~(FMR0_XC0 | FMR0_XC1 | FMR0_RC0 | FMR0_RC1)); - - switch (conf->lcode) { - case PC300_LC_AMI: - cpc_writeb(falcbase + F_REG(FMR0, ch), - cpc_readb(falcbase + F_REG(FMR0, ch)) | - FMR0_XC1 | FMR0_RC1); - /* Clear Channel register to ON for all channels */ - cpc_writeb(falcbase + F_REG(CCB1, ch), 0xff); - cpc_writeb(falcbase + F_REG(CCB2, ch), 0xff); - cpc_writeb(falcbase + F_REG(CCB3, ch), 0xff); - break; - - case PC300_LC_B8ZS: - cpc_writeb(falcbase + F_REG(FMR0, ch), - cpc_readb(falcbase + F_REG(FMR0, ch)) | - FMR0_XC0 | FMR0_XC1 | FMR0_RC0 | FMR0_RC1); - break; - - case PC300_LC_NRZ: - cpc_writeb(falcbase + F_REG(FMR0, ch), - cpc_readb(falcbase + F_REG(FMR0, ch)) | 0x00); - break; - } - - cpc_writeb(falcbase + F_REG(LIM0, ch), - cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_ELOS); - cpc_writeb(falcbase + F_REG(LIM0, ch), - cpc_readb(falcbase + F_REG(LIM0, ch)) & ~(LIM0_SCL1 | LIM0_SCL0)); - /* Set interface mode to 2 MBPS */ - cpc_writeb(falcbase + F_REG(FMR1, ch), - cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_IMOD); - - switch (conf->fr_mode) { - case PC300_FR_ESF: - pfalc->multiframe_mode = 0; - cpc_writeb(falcbase + F_REG(FMR4, ch), - cpc_readb(falcbase + F_REG(FMR4, ch)) | FMR4_FM1); - cpc_writeb(falcbase + F_REG(FMR1, ch), - cpc_readb(falcbase + F_REG(FMR1, ch)) | - FMR1_CRC | FMR1_EDL); - cpc_writeb(falcbase + F_REG(XDL1, ch), 0); - cpc_writeb(falcbase + F_REG(XDL2, ch), 0); - cpc_writeb(falcbase + F_REG(XDL3, ch), 0); - cpc_writeb(falcbase + F_REG(FMR0, ch), - cpc_readb(falcbase + F_REG(FMR0, ch)) & ~FMR0_SRAF); - cpc_writeb(falcbase + F_REG(FMR2, ch), - cpc_readb(falcbase + F_REG(FMR2,ch)) | FMR2_MCSP | FMR2_SSP); - break; - - case PC300_FR_D4: - pfalc->multiframe_mode = 1; - cpc_writeb(falcbase + F_REG(FMR4, ch), - cpc_readb(falcbase + F_REG(FMR4, ch)) & - ~(FMR4_FM1 | FMR4_FM0)); - cpc_writeb(falcbase + F_REG(FMR0, ch), - cpc_readb(falcbase + F_REG(FMR0, ch)) | FMR0_SRAF); - cpc_writeb(falcbase + F_REG(FMR2, ch), - cpc_readb(falcbase + F_REG(FMR2, ch)) & ~FMR2_SSP); - break; - } - - /* Enable Automatic Resynchronization */ - cpc_writeb(falcbase + F_REG(FMR4, ch), - cpc_readb(falcbase + F_REG(FMR4, ch)) | FMR4_AUTO); - - /* Transmit Automatic Remote Alarm */ - cpc_writeb(falcbase + F_REG(FMR2, ch), - cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_AXRA); - - /* Channel translation mode 1 : one to one */ - cpc_writeb(falcbase + F_REG(FMR1, ch), - cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_CTM); - - /* No signaling */ - cpc_writeb(falcbase + F_REG(FMR1, ch), - cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_SIGM); - cpc_writeb(falcbase + F_REG(FMR5, ch), - cpc_readb(falcbase + F_REG(FMR5, ch)) & - ~(FMR5_EIBR | FMR5_SRS)); - cpc_writeb(falcbase + F_REG(CCR1, ch), 0); - - cpc_writeb(falcbase + F_REG(LIM1, ch), - cpc_readb(falcbase + F_REG(LIM1, ch)) | LIM1_RIL0 | LIM1_RIL1); - - switch (conf->lbo) { - /* Provides proper Line Build Out */ - case PC300_LBO_0_DB: - cpc_writeb(falcbase + F_REG(LIM2, ch), (LIM2_LOS1 | dja)); - cpc_writeb(falcbase + F_REG(XPM0, ch), 0x5a); - cpc_writeb(falcbase + F_REG(XPM1, ch), 0x8f); - cpc_writeb(falcbase + F_REG(XPM2, ch), 0x20); - break; - case PC300_LBO_7_5_DB: - cpc_writeb(falcbase + F_REG(LIM2, ch), (0x40 | LIM2_LOS1 | dja)); - cpc_writeb(falcbase + F_REG(XPM0, ch), 0x11); - cpc_writeb(falcbase + F_REG(XPM1, ch), 0x02); - cpc_writeb(falcbase + F_REG(XPM2, ch), 0x20); - break; - case PC300_LBO_15_DB: - cpc_writeb(falcbase + F_REG(LIM2, ch), (0x80 | LIM2_LOS1 | dja)); - cpc_writeb(falcbase + F_REG(XPM0, ch), 0x8e); - cpc_writeb(falcbase + F_REG(XPM1, ch), 0x01); - cpc_writeb(falcbase + F_REG(XPM2, ch), 0x20); - break; - case PC300_LBO_22_5_DB: - cpc_writeb(falcbase + F_REG(LIM2, ch), (0xc0 | LIM2_LOS1 | dja)); - cpc_writeb(falcbase + F_REG(XPM0, ch), 0x09); - cpc_writeb(falcbase + F_REG(XPM1, ch), 0x01); - cpc_writeb(falcbase + F_REG(XPM2, ch), 0x20); - break; - } - - /* Transmit Clock-Slot Offset */ - cpc_writeb(falcbase + F_REG(XC0, ch), - cpc_readb(falcbase + F_REG(XC0, ch)) | 0x01); - /* Transmit Time-slot Offset */ - cpc_writeb(falcbase + F_REG(XC1, ch), 0x3e); - /* Receive Clock-Slot offset */ - cpc_writeb(falcbase + F_REG(RC0, ch), 0x05); - /* Receive Time-slot offset */ - cpc_writeb(falcbase + F_REG(RC1, ch), 0x00); - - /* LOS Detection after 176 consecutive 0s */ - cpc_writeb(falcbase + F_REG(PCDR, ch), 0x0a); - /* LOS Recovery after 22 ones in the time window of PCD */ - cpc_writeb(falcbase + F_REG(PCRR, ch), 0x15); - - cpc_writeb(falcbase + F_REG(IDLE, ch), 0x7f); - - if (conf->fr_mode == PC300_FR_ESF_JAPAN) { - cpc_writeb(falcbase + F_REG(RC1, ch), - cpc_readb(falcbase + F_REG(RC1, ch)) | 0x80); - } - - falc_close_all_timeslots(card, ch); -} - -static void falc_init_e1(pc300_t * card, int ch) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; - falc_t *pfalc = (falc_t *) & chan->falc; - void __iomem *falcbase = card->hw.falcbase; - u8 dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0); - - /* Switch to E1 mode (PCM 30) */ - cpc_writeb(falcbase + F_REG(FMR1, ch), - cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_PMOD); - - /* Clock mode */ - if (conf->phys_settings.clock_type == CLOCK_INT) { /* Master mode */ - cpc_writeb(falcbase + F_REG(LIM0, ch), - cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_MAS); - } else { /* Slave mode */ - cpc_writeb(falcbase + F_REG(LIM0, ch), - cpc_readb(falcbase + F_REG(LIM0, ch)) & ~LIM0_MAS); - } - cpc_writeb(falcbase + F_REG(LOOP, ch), - cpc_readb(falcbase + F_REG(LOOP, ch)) & ~LOOP_SFM); - - cpc_writeb(falcbase + F_REG(IPC, ch), IPC_SCI); - cpc_writeb(falcbase + F_REG(FMR0, ch), - cpc_readb(falcbase + F_REG(FMR0, ch)) & - ~(FMR0_XC0 | FMR0_XC1 | FMR0_RC0 | FMR0_RC1)); - - switch (conf->lcode) { - case PC300_LC_AMI: - cpc_writeb(falcbase + F_REG(FMR0, ch), - cpc_readb(falcbase + F_REG(FMR0, ch)) | - FMR0_XC1 | FMR0_RC1); - break; - - case PC300_LC_HDB3: - cpc_writeb(falcbase + F_REG(FMR0, ch), - cpc_readb(falcbase + F_REG(FMR0, ch)) | - FMR0_XC0 | FMR0_XC1 | FMR0_RC0 | FMR0_RC1); - break; - - case PC300_LC_NRZ: - break; - } - - cpc_writeb(falcbase + F_REG(LIM0, ch), - cpc_readb(falcbase + F_REG(LIM0, ch)) & ~(LIM0_SCL1 | LIM0_SCL0)); - /* Set interface mode to 2 MBPS */ - cpc_writeb(falcbase + F_REG(FMR1, ch), - cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_IMOD); - - cpc_writeb(falcbase + F_REG(XPM0, ch), 0x18); - cpc_writeb(falcbase + F_REG(XPM1, ch), 0x03); - cpc_writeb(falcbase + F_REG(XPM2, ch), 0x00); - - switch (conf->fr_mode) { - case PC300_FR_MF_CRC4: - pfalc->multiframe_mode = 1; - cpc_writeb(falcbase + F_REG(FMR1, ch), - cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_XFS); - cpc_writeb(falcbase + F_REG(FMR2, ch), - cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_RFS1); - cpc_writeb(falcbase + F_REG(FMR2, ch), - cpc_readb(falcbase + F_REG(FMR2, ch)) & ~FMR2_RFS0); - cpc_writeb(falcbase + F_REG(FMR3, ch), - cpc_readb(falcbase + F_REG(FMR3, ch)) & ~FMR3_EXTIW); - - /* MultiFrame Resynchronization */ - cpc_writeb(falcbase + F_REG(FMR1, ch), - cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_MFCS); - - /* Automatic Loss of Multiframe > 914 CRC errors */ - cpc_writeb(falcbase + F_REG(FMR2, ch), - cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_ALMF); - - /* S1 and SI1/SI2 spare Bits set to 1 */ - cpc_writeb(falcbase + F_REG(XSP, ch), - cpc_readb(falcbase + F_REG(XSP, ch)) & ~XSP_AXS); - cpc_writeb(falcbase + F_REG(XSP, ch), - cpc_readb(falcbase + F_REG(XSP, ch)) | XSP_EBP); - cpc_writeb(falcbase + F_REG(XSP, ch), - cpc_readb(falcbase + F_REG(XSP, ch)) | XSP_XS13 | XSP_XS15); - - /* Automatic Force Resynchronization */ - cpc_writeb(falcbase + F_REG(FMR1, ch), - cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_AFR); - - /* Transmit Automatic Remote Alarm */ - cpc_writeb(falcbase + F_REG(FMR2, ch), - cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_AXRA); - - /* Transmit Spare Bits for National Use (Y, Sn, Sa) */ - cpc_writeb(falcbase + F_REG(XSW, ch), - cpc_readb(falcbase + F_REG(XSW, ch)) | - XSW_XY0 | XSW_XY1 | XSW_XY2 | XSW_XY3 | XSW_XY4); - break; - - case PC300_FR_MF_NON_CRC4: - case PC300_FR_D4: - pfalc->multiframe_mode = 0; - cpc_writeb(falcbase + F_REG(FMR1, ch), - cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_XFS); - cpc_writeb(falcbase + F_REG(FMR2, ch), - cpc_readb(falcbase + F_REG(FMR2, ch)) & - ~(FMR2_RFS1 | FMR2_RFS0)); - cpc_writeb(falcbase + F_REG(XSW, ch), - cpc_readb(falcbase + F_REG(XSW, ch)) | XSW_XSIS); - cpc_writeb(falcbase + F_REG(XSP, ch), - cpc_readb(falcbase + F_REG(XSP, ch)) | XSP_XSIF); - - /* Automatic Force Resynchronization */ - cpc_writeb(falcbase + F_REG(FMR1, ch), - cpc_readb(falcbase + F_REG(FMR1, ch)) | FMR1_AFR); - - /* Transmit Automatic Remote Alarm */ - cpc_writeb(falcbase + F_REG(FMR2, ch), - cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_AXRA); - - /* Transmit Spare Bits for National Use (Y, Sn, Sa) */ - cpc_writeb(falcbase + F_REG(XSW, ch), - cpc_readb(falcbase + F_REG(XSW, ch)) | - XSW_XY0 | XSW_XY1 | XSW_XY2 | XSW_XY3 | XSW_XY4); - break; - - case PC300_FR_UNFRAMED: - pfalc->multiframe_mode = 0; - cpc_writeb(falcbase + F_REG(FMR1, ch), - cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_XFS); - cpc_writeb(falcbase + F_REG(FMR2, ch), - cpc_readb(falcbase + F_REG(FMR2, ch)) & - ~(FMR2_RFS1 | FMR2_RFS0)); - cpc_writeb(falcbase + F_REG(XSP, ch), - cpc_readb(falcbase + F_REG(XSP, ch)) | XSP_TT0); - cpc_writeb(falcbase + F_REG(XSW, ch), - cpc_readb(falcbase + F_REG(XSW, ch)) & - ~(XSW_XTM|XSW_XY0|XSW_XY1|XSW_XY2|XSW_XY3|XSW_XY4)); - cpc_writeb(falcbase + F_REG(TSWM, ch), 0xff); - cpc_writeb(falcbase + F_REG(FMR2, ch), - cpc_readb(falcbase + F_REG(FMR2, ch)) | - (FMR2_RTM | FMR2_DAIS)); - cpc_writeb(falcbase + F_REG(FMR2, ch), - cpc_readb(falcbase + F_REG(FMR2, ch)) & ~FMR2_AXRA); - cpc_writeb(falcbase + F_REG(FMR1, ch), - cpc_readb(falcbase + F_REG(FMR1, ch)) & ~FMR1_AFR); - pfalc->sync = 1; - cpc_writeb(falcbase + card->hw.cpld_reg2, - cpc_readb(falcbase + card->hw.cpld_reg2) | - (CPLD_REG2_FALC_LED2 << (2 * ch))); - break; - } - - /* No signaling */ - cpc_writeb(falcbase + F_REG(XSP, ch), - cpc_readb(falcbase + F_REG(XSP, ch)) & ~XSP_CASEN); - cpc_writeb(falcbase + F_REG(CCR1, ch), 0); - - cpc_writeb(falcbase + F_REG(LIM1, ch), - cpc_readb(falcbase + F_REG(LIM1, ch)) | LIM1_RIL0 | LIM1_RIL1); - cpc_writeb(falcbase + F_REG(LIM2, ch), (LIM2_LOS1 | dja)); - - /* Transmit Clock-Slot Offset */ - cpc_writeb(falcbase + F_REG(XC0, ch), - cpc_readb(falcbase + F_REG(XC0, ch)) | 0x01); - /* Transmit Time-slot Offset */ - cpc_writeb(falcbase + F_REG(XC1, ch), 0x3e); - /* Receive Clock-Slot offset */ - cpc_writeb(falcbase + F_REG(RC0, ch), 0x05); - /* Receive Time-slot offset */ - cpc_writeb(falcbase + F_REG(RC1, ch), 0x00); - - /* LOS Detection after 176 consecutive 0s */ - cpc_writeb(falcbase + F_REG(PCDR, ch), 0x0a); - /* LOS Recovery after 22 ones in the time window of PCD */ - cpc_writeb(falcbase + F_REG(PCRR, ch), 0x15); - - cpc_writeb(falcbase + F_REG(IDLE, ch), 0x7f); - - falc_close_all_timeslots(card, ch); -} - -static void falc_init_hdlc(pc300_t * card, int ch) -{ - void __iomem *falcbase = card->hw.falcbase; - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; - - /* Enable transparent data transfer */ - if (conf->fr_mode == PC300_FR_UNFRAMED) { - cpc_writeb(falcbase + F_REG(MODE, ch), 0); - } else { - cpc_writeb(falcbase + F_REG(MODE, ch), - cpc_readb(falcbase + F_REG(MODE, ch)) | - (MODE_HRAC | MODE_MDS2)); - cpc_writeb(falcbase + F_REG(RAH2, ch), 0xff); - cpc_writeb(falcbase + F_REG(RAH1, ch), 0xff); - cpc_writeb(falcbase + F_REG(RAL2, ch), 0xff); - cpc_writeb(falcbase + F_REG(RAL1, ch), 0xff); - } - - /* Tx/Rx reset */ - falc_issue_cmd(card, ch, CMDR_RRES | CMDR_XRES | CMDR_SRES); - - /* Enable interrupt sources */ - falc_intr_enable(card, ch); -} - -static void te_config(pc300_t * card, int ch) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; - falc_t *pfalc = (falc_t *) & chan->falc; - void __iomem *falcbase = card->hw.falcbase; - u8 dummy; - unsigned long flags; - - memset(pfalc, 0, sizeof(falc_t)); - switch (conf->media) { - case IF_IFACE_T1: - pfalc->num_channels = NUM_OF_T1_CHANNELS; - pfalc->offset = 1; - break; - case IF_IFACE_E1: - pfalc->num_channels = NUM_OF_E1_CHANNELS; - pfalc->offset = 0; - break; - } - if (conf->tslot_bitmap == 0xffffffffUL) - pfalc->full_bandwidth = 1; - else - pfalc->full_bandwidth = 0; - - CPC_LOCK(card, flags); - /* Reset the FALC chip */ - cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, - cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) | - (CPLD_REG1_FALC_RESET << (2 * ch))); - udelay(10000); - cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, - cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) & - ~(CPLD_REG1_FALC_RESET << (2 * ch))); - - if (conf->media == IF_IFACE_T1) { - falc_init_t1(card, ch); - } else { - falc_init_e1(card, ch); - } - falc_init_hdlc(card, ch); - if (conf->rx_sens == PC300_RX_SENS_SH) { - cpc_writeb(falcbase + F_REG(LIM0, ch), - cpc_readb(falcbase + F_REG(LIM0, ch)) & ~LIM0_EQON); - } else { - cpc_writeb(falcbase + F_REG(LIM0, ch), - cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_EQON); - } - cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, - cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) | - ((CPLD_REG2_FALC_TX_CLK | CPLD_REG2_FALC_RX_CLK) << (2 * ch))); - - /* Clear all interrupt registers */ - dummy = cpc_readb(falcbase + F_REG(FISR0, ch)) + - cpc_readb(falcbase + F_REG(FISR1, ch)) + - cpc_readb(falcbase + F_REG(FISR2, ch)) + - cpc_readb(falcbase + F_REG(FISR3, ch)); - CPC_UNLOCK(card, flags); -} - -static void falc_check_status(pc300_t * card, int ch, unsigned char frs0) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; - falc_t *pfalc = (falc_t *) & chan->falc; - void __iomem *falcbase = card->hw.falcbase; - - /* Verify LOS */ - if (frs0 & FRS0_LOS) { - if (!pfalc->red_alarm) { - pfalc->red_alarm = 1; - pfalc->los++; - if (!pfalc->blue_alarm) { - // EVENT_FALC_ABNORMAL - if (conf->media == IF_IFACE_T1) { - /* Disable this interrupt as it may otherwise interfere - * with other working boards. */ - cpc_writeb(falcbase + F_REG(IMR0, ch), - cpc_readb(falcbase + F_REG(IMR0, ch)) - | IMR0_PDEN); - } - falc_disable_comm(card, ch); - // EVENT_FALC_ABNORMAL - } - } - } else { - if (pfalc->red_alarm) { - pfalc->red_alarm = 0; - pfalc->losr++; - } - } - - if (conf->fr_mode != PC300_FR_UNFRAMED) { - /* Verify AIS alarm */ - if (frs0 & FRS0_AIS) { - if (!pfalc->blue_alarm) { - pfalc->blue_alarm = 1; - pfalc->ais++; - // EVENT_AIS - if (conf->media == IF_IFACE_T1) { - /* Disable this interrupt as it may otherwise interfere with other working boards. */ - cpc_writeb(falcbase + F_REG(IMR0, ch), - cpc_readb(falcbase + F_REG(IMR0, ch)) | IMR0_PDEN); - } - falc_disable_comm(card, ch); - // EVENT_AIS - } - } else { - pfalc->blue_alarm = 0; - } - - /* Verify LFA */ - if (frs0 & FRS0_LFA) { - if (!pfalc->loss_fa) { - pfalc->loss_fa = 1; - pfalc->lfa++; - if (!pfalc->blue_alarm && !pfalc->red_alarm) { - // EVENT_FALC_ABNORMAL - if (conf->media == IF_IFACE_T1) { - /* Disable this interrupt as it may otherwise - * interfere with other working boards. */ - cpc_writeb(falcbase + F_REG(IMR0, ch), - cpc_readb(falcbase + F_REG(IMR0, ch)) - | IMR0_PDEN); - } - falc_disable_comm(card, ch); - // EVENT_FALC_ABNORMAL - } - } - } else { - if (pfalc->loss_fa) { - pfalc->loss_fa = 0; - pfalc->farec++; - } - } - - /* Verify LMFA */ - if (pfalc->multiframe_mode && (frs0 & FRS0_LMFA)) { - /* D4 or CRC4 frame mode */ - if (!pfalc->loss_mfa) { - pfalc->loss_mfa = 1; - pfalc->lmfa++; - if (!pfalc->blue_alarm && !pfalc->red_alarm && - !pfalc->loss_fa) { - // EVENT_FALC_ABNORMAL - if (conf->media == IF_IFACE_T1) { - /* Disable this interrupt as it may otherwise - * interfere with other working boards. */ - cpc_writeb(falcbase + F_REG(IMR0, ch), - cpc_readb(falcbase + F_REG(IMR0, ch)) - | IMR0_PDEN); - } - falc_disable_comm(card, ch); - // EVENT_FALC_ABNORMAL - } - } - } else { - pfalc->loss_mfa = 0; - } - - /* Verify Remote Alarm */ - if (frs0 & FRS0_RRA) { - if (!pfalc->yellow_alarm) { - pfalc->yellow_alarm = 1; - pfalc->rai++; - if (pfalc->sync) { - // EVENT_RAI - falc_disable_comm(card, ch); - // EVENT_RAI - } - } - } else { - pfalc->yellow_alarm = 0; - } - } /* if !PC300_UNFRAMED */ - - if (pfalc->red_alarm || pfalc->loss_fa || - pfalc->loss_mfa || pfalc->blue_alarm) { - if (pfalc->sync) { - pfalc->sync = 0; - chan->d.line_off++; - cpc_writeb(falcbase + card->hw.cpld_reg2, - cpc_readb(falcbase + card->hw.cpld_reg2) & - ~(CPLD_REG2_FALC_LED2 << (2 * ch))); - } - } else { - if (!pfalc->sync) { - pfalc->sync = 1; - chan->d.line_on++; - cpc_writeb(falcbase + card->hw.cpld_reg2, - cpc_readb(falcbase + card->hw.cpld_reg2) | - (CPLD_REG2_FALC_LED2 << (2 * ch))); - } - } - - if (pfalc->sync && !pfalc->yellow_alarm) { - if (!pfalc->active) { - // EVENT_FALC_NORMAL - if (pfalc->loop_active) { - return; - } - if (conf->media == IF_IFACE_T1) { - cpc_writeb(falcbase + F_REG(IMR0, ch), - cpc_readb(falcbase + F_REG(IMR0, ch)) & ~IMR0_PDEN); - } - falc_enable_comm(card, ch); - // EVENT_FALC_NORMAL - pfalc->active = 1; - } - } else { - if (pfalc->active) { - pfalc->active = 0; - } - } -} - -static void falc_update_stats(pc300_t * card, int ch) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; - falc_t *pfalc = (falc_t *) & chan->falc; - void __iomem *falcbase = card->hw.falcbase; - u16 counter; - - counter = cpc_readb(falcbase + F_REG(FECL, ch)); - counter |= cpc_readb(falcbase + F_REG(FECH, ch)) << 8; - pfalc->fec += counter; - - counter = cpc_readb(falcbase + F_REG(CVCL, ch)); - counter |= cpc_readb(falcbase + F_REG(CVCH, ch)) << 8; - pfalc->cvc += counter; - - counter = cpc_readb(falcbase + F_REG(CECL, ch)); - counter |= cpc_readb(falcbase + F_REG(CECH, ch)) << 8; - pfalc->cec += counter; - - counter = cpc_readb(falcbase + F_REG(EBCL, ch)); - counter |= cpc_readb(falcbase + F_REG(EBCH, ch)) << 8; - pfalc->ebc += counter; - - if (cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_EPRM) { - mdelay(10); - counter = cpc_readb(falcbase + F_REG(BECL, ch)); - counter |= cpc_readb(falcbase + F_REG(BECH, ch)) << 8; - pfalc->bec += counter; - - if (((conf->media == IF_IFACE_T1) && - (cpc_readb(falcbase + F_REG(FRS1, ch)) & FRS1_LLBAD) && - (!(cpc_readb(falcbase + F_REG(FRS1, ch)) & FRS1_PDEN))) || - ((conf->media == IF_IFACE_E1) && - (cpc_readb(falcbase + F_REG(RSP, ch)) & RSP_LLBAD))) { - pfalc->prbs = 2; - } else { - pfalc->prbs = 1; - } - } -} - -/*---------------------------------------------------------------------------- - * falc_remote_loop - *---------------------------------------------------------------------------- - * Description: In the remote loopback mode the clock and data recovered - * from the line inputs RL1/2 or RDIP/RDIN are routed back - * to the line outputs XL1/2 or XDOP/XDON via the analog - * transmitter. As in normal mode they are processed by - * the synchronizer and then sent to the system interface. - *---------------------------------------------------------------------------- - */ -static void falc_remote_loop(pc300_t * card, int ch, int loop_on) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; - falc_t *pfalc = (falc_t *) & chan->falc; - void __iomem *falcbase = card->hw.falcbase; - - if (loop_on) { - // EVENT_FALC_ABNORMAL - if (conf->media == IF_IFACE_T1) { - /* Disable this interrupt as it may otherwise interfere with - * other working boards. */ - cpc_writeb(falcbase + F_REG(IMR0, ch), - cpc_readb(falcbase + F_REG(IMR0, ch)) | IMR0_PDEN); - } - falc_disable_comm(card, ch); - // EVENT_FALC_ABNORMAL - cpc_writeb(falcbase + F_REG(LIM1, ch), - cpc_readb(falcbase + F_REG(LIM1, ch)) | LIM1_RL); - pfalc->loop_active = 1; - } else { - cpc_writeb(falcbase + F_REG(LIM1, ch), - cpc_readb(falcbase + F_REG(LIM1, ch)) & ~LIM1_RL); - pfalc->sync = 0; - cpc_writeb(falcbase + card->hw.cpld_reg2, - cpc_readb(falcbase + card->hw.cpld_reg2) & - ~(CPLD_REG2_FALC_LED2 << (2 * ch))); - pfalc->active = 0; - falc_issue_cmd(card, ch, CMDR_XRES); - pfalc->loop_active = 0; - } -} - -/*---------------------------------------------------------------------------- - * falc_local_loop - *---------------------------------------------------------------------------- - * Description: The local loopback mode disconnects the receive lines - * RL1/RL2 resp. RDIP/RDIN from the receiver. Instead of the - * signals coming from the line the data provided by system - * interface are routed through the analog receiver back to - * the system interface. The unipolar bit stream will be - * undisturbed transmitted on the line. Receiver and transmitter - * coding must be identical. - *---------------------------------------------------------------------------- - */ -static void falc_local_loop(pc300_t * card, int ch, int loop_on) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - falc_t *pfalc = (falc_t *) & chan->falc; - void __iomem *falcbase = card->hw.falcbase; - - if (loop_on) { - cpc_writeb(falcbase + F_REG(LIM0, ch), - cpc_readb(falcbase + F_REG(LIM0, ch)) | LIM0_LL); - pfalc->loop_active = 1; - } else { - cpc_writeb(falcbase + F_REG(LIM0, ch), - cpc_readb(falcbase + F_REG(LIM0, ch)) & ~LIM0_LL); - pfalc->loop_active = 0; - } -} - -/*---------------------------------------------------------------------------- - * falc_payload_loop - *---------------------------------------------------------------------------- - * Description: This routine allows to enable/disable payload loopback. - * When the payload loop is activated, the received 192 bits - * of payload data will be looped back to the transmit - * direction. The framing bits, CRC6 and DL bits are not - * looped. They are originated by the FALC-LH transmitter. - *---------------------------------------------------------------------------- - */ -static void falc_payload_loop(pc300_t * card, int ch, int loop_on) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; - falc_t *pfalc = (falc_t *) & chan->falc; - void __iomem *falcbase = card->hw.falcbase; - - if (loop_on) { - // EVENT_FALC_ABNORMAL - if (conf->media == IF_IFACE_T1) { - /* Disable this interrupt as it may otherwise interfere with - * other working boards. */ - cpc_writeb(falcbase + F_REG(IMR0, ch), - cpc_readb(falcbase + F_REG(IMR0, ch)) | IMR0_PDEN); - } - falc_disable_comm(card, ch); - // EVENT_FALC_ABNORMAL - cpc_writeb(falcbase + F_REG(FMR2, ch), - cpc_readb(falcbase + F_REG(FMR2, ch)) | FMR2_PLB); - if (conf->media == IF_IFACE_T1) { - cpc_writeb(falcbase + F_REG(FMR4, ch), - cpc_readb(falcbase + F_REG(FMR4, ch)) | FMR4_TM); - } else { - cpc_writeb(falcbase + F_REG(FMR5, ch), - cpc_readb(falcbase + F_REG(FMR5, ch)) | XSP_TT0); - } - falc_open_all_timeslots(card, ch); - pfalc->loop_active = 2; - } else { - cpc_writeb(falcbase + F_REG(FMR2, ch), - cpc_readb(falcbase + F_REG(FMR2, ch)) & ~FMR2_PLB); - if (conf->media == IF_IFACE_T1) { - cpc_writeb(falcbase + F_REG(FMR4, ch), - cpc_readb(falcbase + F_REG(FMR4, ch)) & ~FMR4_TM); - } else { - cpc_writeb(falcbase + F_REG(FMR5, ch), - cpc_readb(falcbase + F_REG(FMR5, ch)) & ~XSP_TT0); - } - pfalc->sync = 0; - cpc_writeb(falcbase + card->hw.cpld_reg2, - cpc_readb(falcbase + card->hw.cpld_reg2) & - ~(CPLD_REG2_FALC_LED2 << (2 * ch))); - pfalc->active = 0; - falc_issue_cmd(card, ch, CMDR_XRES); - pfalc->loop_active = 0; - } -} - -/*---------------------------------------------------------------------------- - * turn_off_xlu - *---------------------------------------------------------------------------- - * Description: Turns XLU bit off in the proper register - *---------------------------------------------------------------------------- - */ -static void turn_off_xlu(pc300_t * card, int ch) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; - void __iomem *falcbase = card->hw.falcbase; - - if (conf->media == IF_IFACE_T1) { - cpc_writeb(falcbase + F_REG(FMR5, ch), - cpc_readb(falcbase + F_REG(FMR5, ch)) & ~FMR5_XLU); - } else { - cpc_writeb(falcbase + F_REG(FMR3, ch), - cpc_readb(falcbase + F_REG(FMR3, ch)) & ~FMR3_XLU); - } -} - -/*---------------------------------------------------------------------------- - * turn_off_xld - *---------------------------------------------------------------------------- - * Description: Turns XLD bit off in the proper register - *---------------------------------------------------------------------------- - */ -static void turn_off_xld(pc300_t * card, int ch) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; - void __iomem *falcbase = card->hw.falcbase; - - if (conf->media == IF_IFACE_T1) { - cpc_writeb(falcbase + F_REG(FMR5, ch), - cpc_readb(falcbase + F_REG(FMR5, ch)) & ~FMR5_XLD); - } else { - cpc_writeb(falcbase + F_REG(FMR3, ch), - cpc_readb(falcbase + F_REG(FMR3, ch)) & ~FMR3_XLD); - } -} - -/*---------------------------------------------------------------------------- - * falc_generate_loop_up_code - *---------------------------------------------------------------------------- - * Description: This routine writes the proper FALC chip register in order - * to generate a LOOP activation code over a T1/E1 line. - *---------------------------------------------------------------------------- - */ -static void falc_generate_loop_up_code(pc300_t * card, int ch) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; - falc_t *pfalc = (falc_t *) & chan->falc; - void __iomem *falcbase = card->hw.falcbase; - - if (conf->media == IF_IFACE_T1) { - cpc_writeb(falcbase + F_REG(FMR5, ch), - cpc_readb(falcbase + F_REG(FMR5, ch)) | FMR5_XLU); - } else { - cpc_writeb(falcbase + F_REG(FMR3, ch), - cpc_readb(falcbase + F_REG(FMR3, ch)) | FMR3_XLU); - } - // EVENT_FALC_ABNORMAL - if (conf->media == IF_IFACE_T1) { - /* Disable this interrupt as it may otherwise interfere with - * other working boards. */ - cpc_writeb(falcbase + F_REG(IMR0, ch), - cpc_readb(falcbase + F_REG(IMR0, ch)) | IMR0_PDEN); - } - falc_disable_comm(card, ch); - // EVENT_FALC_ABNORMAL - pfalc->loop_gen = 1; -} - -/*---------------------------------------------------------------------------- - * falc_generate_loop_down_code - *---------------------------------------------------------------------------- - * Description: This routine writes the proper FALC chip register in order - * to generate a LOOP deactivation code over a T1/E1 line. - *---------------------------------------------------------------------------- - */ -static void falc_generate_loop_down_code(pc300_t * card, int ch) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; - falc_t *pfalc = (falc_t *) & chan->falc; - void __iomem *falcbase = card->hw.falcbase; - - if (conf->media == IF_IFACE_T1) { - cpc_writeb(falcbase + F_REG(FMR5, ch), - cpc_readb(falcbase + F_REG(FMR5, ch)) | FMR5_XLD); - } else { - cpc_writeb(falcbase + F_REG(FMR3, ch), - cpc_readb(falcbase + F_REG(FMR3, ch)) | FMR3_XLD); - } - pfalc->sync = 0; - cpc_writeb(falcbase + card->hw.cpld_reg2, - cpc_readb(falcbase + card->hw.cpld_reg2) & - ~(CPLD_REG2_FALC_LED2 << (2 * ch))); - pfalc->active = 0; -//? falc_issue_cmd(card, ch, CMDR_XRES); - pfalc->loop_gen = 0; -} - -/*---------------------------------------------------------------------------- - * falc_pattern_test - *---------------------------------------------------------------------------- - * Description: This routine generates a pattern code and checks - * it on the reception side. - *---------------------------------------------------------------------------- - */ -static void falc_pattern_test(pc300_t * card, int ch, unsigned int activate) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; - falc_t *pfalc = (falc_t *) & chan->falc; - void __iomem *falcbase = card->hw.falcbase; - - if (activate) { - pfalc->prbs = 1; - pfalc->bec = 0; - if (conf->media == IF_IFACE_T1) { - /* Disable local loop activation/deactivation detect */ - cpc_writeb(falcbase + F_REG(IMR3, ch), - cpc_readb(falcbase + F_REG(IMR3, ch)) | IMR3_LLBSC); - } else { - /* Disable local loop activation/deactivation detect */ - cpc_writeb(falcbase + F_REG(IMR1, ch), - cpc_readb(falcbase + F_REG(IMR1, ch)) | IMR1_LLBSC); - } - /* Activates generation and monitoring of PRBS - * (Pseudo Random Bit Sequence) */ - cpc_writeb(falcbase + F_REG(LCR1, ch), - cpc_readb(falcbase + F_REG(LCR1, ch)) | LCR1_EPRM | LCR1_XPRBS); - } else { - pfalc->prbs = 0; - /* Deactivates generation and monitoring of PRBS - * (Pseudo Random Bit Sequence) */ - cpc_writeb(falcbase + F_REG(LCR1, ch), - cpc_readb(falcbase+F_REG(LCR1,ch)) & ~(LCR1_EPRM | LCR1_XPRBS)); - if (conf->media == IF_IFACE_T1) { - /* Enable local loop activation/deactivation detect */ - cpc_writeb(falcbase + F_REG(IMR3, ch), - cpc_readb(falcbase + F_REG(IMR3, ch)) & ~IMR3_LLBSC); - } else { - /* Enable local loop activation/deactivation detect */ - cpc_writeb(falcbase + F_REG(IMR1, ch), - cpc_readb(falcbase + F_REG(IMR1, ch)) & ~IMR1_LLBSC); - } - } -} - -/*---------------------------------------------------------------------------- - * falc_pattern_test_error - *---------------------------------------------------------------------------- - * Description: This routine returns the bit error counter value - *---------------------------------------------------------------------------- - */ -static u16 falc_pattern_test_error(pc300_t * card, int ch) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - falc_t *pfalc = (falc_t *) & chan->falc; - - return pfalc->bec; -} - -/**********************************/ -/*** Net Interface Routines ***/ -/**********************************/ - -static void -cpc_trace(struct net_device *dev, struct sk_buff *skb_main, char rx_tx) -{ - struct sk_buff *skb; - - if ((skb = dev_alloc_skb(10 + skb_main->len)) == NULL) { - printk("%s: out of memory\n", dev->name); - return; - } - skb_put(skb, 10 + skb_main->len); - - skb->dev = dev; - skb->protocol = htons(ETH_P_CUST); - skb_reset_mac_header(skb); - skb->pkt_type = PACKET_HOST; - skb->len = 10 + skb_main->len; - - skb_copy_to_linear_data(skb, dev->name, 5); - skb->data[5] = '['; - skb->data[6] = rx_tx; - skb->data[7] = ']'; - skb->data[8] = ':'; - skb->data[9] = ' '; - skb_copy_from_linear_data(skb_main, &skb->data[10], skb_main->len); - - netif_rx(skb); -} - -static void cpc_tx_timeout(struct net_device *dev) -{ - pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv; - pc300ch_t *chan = (pc300ch_t *) d->chan; - pc300_t *card = (pc300_t *) chan->card; - int ch = chan->channel; - unsigned long flags; - u8 ilar; - - dev->stats.tx_errors++; - dev->stats.tx_aborted_errors++; - CPC_LOCK(card, flags); - if ((ilar = cpc_readb(card->hw.scabase + ILAR)) != 0) { - printk("%s: ILAR=0x%x\n", dev->name, ilar); - cpc_writeb(card->hw.scabase + ILAR, ilar); - cpc_writeb(card->hw.scabase + DMER, 0x80); - } - if (card->hw.type == PC300_TE) { - cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, - cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) & - ~(CPLD_REG2_FALC_LED1 << (2 * ch))); - } - dev->trans_start = jiffies; /* prevent tx timeout */ - CPC_UNLOCK(card, flags); - netif_wake_queue(dev); -} - -static int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev) -{ - pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv; - pc300ch_t *chan = (pc300ch_t *) d->chan; - pc300_t *card = (pc300_t *) chan->card; - int ch = chan->channel; - unsigned long flags; -#ifdef PC300_DEBUG_TX - int i; -#endif - - if (!netif_carrier_ok(dev)) { - /* DCD must be OFF: drop packet */ - dev_kfree_skb(skb); - dev->stats.tx_errors++; - dev->stats.tx_carrier_errors++; - return 0; - } else if (cpc_readb(card->hw.scabase + M_REG(ST3, ch)) & ST3_DCD) { - printk("%s: DCD is OFF. Going administrative down.\n", dev->name); - dev->stats.tx_errors++; - dev->stats.tx_carrier_errors++; - dev_kfree_skb(skb); - netif_carrier_off(dev); - CPC_LOCK(card, flags); - cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_TX_BUF_CLR); - if (card->hw.type == PC300_TE) { - cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, - cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) & - ~(CPLD_REG2_FALC_LED1 << (2 * ch))); - } - CPC_UNLOCK(card, flags); - netif_wake_queue(dev); - return 0; - } - - /* Write buffer to DMA buffers */ - if (dma_buf_write(card, ch, (u8 *)skb->data, skb->len) != 0) { -// printk("%s: write error. Dropping TX packet.\n", dev->name); - netif_stop_queue(dev); - dev_kfree_skb(skb); - dev->stats.tx_errors++; - dev->stats.tx_dropped++; - return 0; - } -#ifdef PC300_DEBUG_TX - printk("%s T:", dev->name); - for (i = 0; i < skb->len; i++) - printk(" %02x", *(skb->data + i)); - printk("\n"); -#endif - - if (d->trace_on) { - cpc_trace(dev, skb, 'T'); - } - - /* Start transmission */ - CPC_LOCK(card, flags); - /* verify if it has more than one free descriptor */ - if (card->chan[ch].nfree_tx_bd <= 1) { - /* don't have so stop the queue */ - netif_stop_queue(dev); - } - cpc_writel(card->hw.scabase + DTX_REG(EDAL, ch), - TX_BD_ADDR(ch, chan->tx_next_bd)); - cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_TX_ENA); - cpc_writeb(card->hw.scabase + DSR_TX(ch), DSR_DE); - if (card->hw.type == PC300_TE) { - cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, - cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) | - (CPLD_REG2_FALC_LED1 << (2 * ch))); - } - CPC_UNLOCK(card, flags); - dev_kfree_skb(skb); - - return 0; -} - -static void cpc_net_rx(struct net_device *dev) -{ - pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv; - pc300ch_t *chan = (pc300ch_t *) d->chan; - pc300_t *card = (pc300_t *) chan->card; - int ch = chan->channel; -#ifdef PC300_DEBUG_RX - int i; -#endif - int rxb; - struct sk_buff *skb; - - while (1) { - if ((rxb = dma_get_rx_frame_size(card, ch)) == -1) - return; - - if (!netif_carrier_ok(dev)) { - /* DCD must be OFF: drop packet */ - printk("%s : DCD is OFF - drop %d rx bytes\n", dev->name, rxb); - skb = NULL; - } else { - if (rxb > (dev->mtu + 40)) { /* add headers */ - printk("%s : MTU exceeded %d\n", dev->name, rxb); - skb = NULL; - } else { - skb = dev_alloc_skb(rxb); - if (skb == NULL) { - printk("%s: Memory squeeze!!\n", dev->name); - return; - } - skb->dev = dev; - } - } - - if (((rxb = dma_buf_read(card, ch, skb)) <= 0) || (skb == NULL)) { -#ifdef PC300_DEBUG_RX - printk("%s: rxb = %x\n", dev->name, rxb); -#endif - if ((skb == NULL) && (rxb > 0)) { - /* rxb > dev->mtu */ - dev->stats.rx_errors++; - dev->stats.rx_length_errors++; - continue; - } - - if (rxb < 0) { /* Invalid frame */ - rxb = -rxb; - if (rxb & DST_OVR) { - dev->stats.rx_errors++; - dev->stats.rx_fifo_errors++; - } - if (rxb & DST_CRC) { - dev->stats.rx_errors++; - dev->stats.rx_crc_errors++; - } - if (rxb & (DST_RBIT | DST_SHRT | DST_ABT)) { - dev->stats.rx_errors++; - dev->stats.rx_frame_errors++; - } - } - if (skb) { - dev_kfree_skb_irq(skb); - } - continue; - } - - dev->stats.rx_bytes += rxb; - -#ifdef PC300_DEBUG_RX - printk("%s R:", dev->name); - for (i = 0; i < skb->len; i++) - printk(" %02x", *(skb->data + i)); - printk("\n"); -#endif - if (d->trace_on) { - cpc_trace(dev, skb, 'R'); - } - dev->stats.rx_packets++; - skb->protocol = hdlc_type_trans(skb, dev); - netif_rx(skb); - } -} - -/************************************/ -/*** PC300 Interrupt Routines ***/ -/************************************/ -static void sca_tx_intr(pc300dev_t *dev) -{ - pc300ch_t *chan = (pc300ch_t *)dev->chan; - pc300_t *card = (pc300_t *)chan->card; - int ch = chan->channel; - volatile pcsca_bd_t __iomem * ptdescr; - - /* Clean up descriptors from previous transmission */ - ptdescr = (card->hw.rambase + - TX_BD_ADDR(ch,chan->tx_first_bd)); - while ((cpc_readl(card->hw.scabase + DTX_REG(CDAL,ch)) != - TX_BD_ADDR(ch,chan->tx_first_bd)) && - (cpc_readb(&ptdescr->status) & DST_OSB)) { - dev->dev->stats.tx_packets++; - dev->dev->stats.tx_bytes += cpc_readw(&ptdescr->len); - cpc_writeb(&ptdescr->status, DST_OSB); - cpc_writew(&ptdescr->len, 0); - chan->nfree_tx_bd++; - chan->tx_first_bd = (chan->tx_first_bd + 1) & (N_DMA_TX_BUF - 1); - ptdescr = (card->hw.rambase + TX_BD_ADDR(ch,chan->tx_first_bd)); - } - -#ifdef CONFIG_PC300_MLPPP - if (chan->conf.proto == PC300_PROTO_MLPPP) { - cpc_tty_trigger_poll(dev); - } else { -#endif - /* Tell the upper layer we are ready to transmit more packets */ - netif_wake_queue(dev->dev); -#ifdef CONFIG_PC300_MLPPP - } -#endif -} - -static void sca_intr(pc300_t * card) -{ - void __iomem *scabase = card->hw.scabase; - volatile u32 status; - int ch; - int intr_count = 0; - unsigned char dsr_rx; - - while ((status = cpc_readl(scabase + ISR0)) != 0) { - for (ch = 0; ch < card->hw.nchan; ch++) { - pc300ch_t *chan = &card->chan[ch]; - pc300dev_t *d = &chan->d; - struct net_device *dev = d->dev; - - spin_lock(&card->card_lock); - - /**** Reception ****/ - if (status & IR0_DRX((IR0_DMIA | IR0_DMIB), ch)) { - u8 drx_stat = cpc_readb(scabase + DSR_RX(ch)); - - /* Clear RX interrupts */ - cpc_writeb(scabase + DSR_RX(ch), drx_stat | DSR_DWE); - -#ifdef PC300_DEBUG_INTR - printk ("sca_intr: RX intr chan[%d] (st=0x%08lx, dsr=0x%02x)\n", - ch, status, drx_stat); -#endif - if (status & IR0_DRX(IR0_DMIA, ch)) { - if (drx_stat & DSR_BOF) { -#ifdef CONFIG_PC300_MLPPP - if (chan->conf.proto == PC300_PROTO_MLPPP) { - /* verify if driver is TTY */ - if ((cpc_readb(scabase + DSR_RX(ch)) & DSR_DE)) { - rx_dma_stop(card, ch); - } - cpc_tty_receive(d); - rx_dma_start(card, ch); - } else -#endif - { - if ((cpc_readb(scabase + DSR_RX(ch)) & DSR_DE)) { - rx_dma_stop(card, ch); - } - cpc_net_rx(dev); - /* Discard invalid frames */ - dev->stats.rx_errors++; - dev->stats.rx_over_errors++; - chan->rx_first_bd = 0; - chan->rx_last_bd = N_DMA_RX_BUF - 1; - rx_dma_start(card, ch); - } - } - } - if (status & IR0_DRX(IR0_DMIB, ch)) { - if (drx_stat & DSR_EOM) { - if (card->hw.type == PC300_TE) { - cpc_writeb(card->hw.falcbase + - card->hw.cpld_reg2, - cpc_readb (card->hw.falcbase + - card->hw.cpld_reg2) | - (CPLD_REG2_FALC_LED1 << (2 * ch))); - } -#ifdef CONFIG_PC300_MLPPP - if (chan->conf.proto == PC300_PROTO_MLPPP) { - /* verify if driver is TTY */ - cpc_tty_receive(d); - } else { - cpc_net_rx(dev); - } -#else - cpc_net_rx(dev); -#endif - if (card->hw.type == PC300_TE) { - cpc_writeb(card->hw.falcbase + - card->hw.cpld_reg2, - cpc_readb (card->hw.falcbase + - card->hw.cpld_reg2) & - ~ (CPLD_REG2_FALC_LED1 << (2 * ch))); - } - } - } - if (!(dsr_rx = cpc_readb(scabase + DSR_RX(ch)) & DSR_DE)) { -#ifdef PC300_DEBUG_INTR - printk("%s: RX intr chan[%d] (st=0x%08lx, dsr=0x%02x, dsr2=0x%02x)\n", - dev->name, ch, status, drx_stat, dsr_rx); -#endif - cpc_writeb(scabase + DSR_RX(ch), (dsr_rx | DSR_DE) & 0xfe); - } - } - - /**** Transmission ****/ - if (status & IR0_DTX((IR0_EFT | IR0_DMIA | IR0_DMIB), ch)) { - u8 dtx_stat = cpc_readb(scabase + DSR_TX(ch)); - - /* Clear TX interrupts */ - cpc_writeb(scabase + DSR_TX(ch), dtx_stat | DSR_DWE); - -#ifdef PC300_DEBUG_INTR - printk ("sca_intr: TX intr chan[%d] (st=0x%08lx, dsr=0x%02x)\n", - ch, status, dtx_stat); -#endif - if (status & IR0_DTX(IR0_EFT, ch)) { - if (dtx_stat & DSR_UDRF) { - if (cpc_readb (scabase + M_REG(TBN, ch)) != 0) { - cpc_writeb(scabase + M_REG(CMD,ch), CMD_TX_BUF_CLR); - } - if (card->hw.type == PC300_TE) { - cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, - cpc_readb (card->hw.falcbase + - card->hw.cpld_reg2) & - ~ (CPLD_REG2_FALC_LED1 << (2 * ch))); - } - dev->stats.tx_errors++; - dev->stats.tx_fifo_errors++; - sca_tx_intr(d); - } - } - if (status & IR0_DTX(IR0_DMIA, ch)) { - if (dtx_stat & DSR_BOF) { - } - } - if (status & IR0_DTX(IR0_DMIB, ch)) { - if (dtx_stat & DSR_EOM) { - if (card->hw.type == PC300_TE) { - cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, - cpc_readb (card->hw.falcbase + - card->hw.cpld_reg2) & - ~ (CPLD_REG2_FALC_LED1 << (2 * ch))); - } - sca_tx_intr(d); - } - } - } - - /**** MSCI ****/ - if (status & IR0_M(IR0_RXINTA, ch)) { - u8 st1 = cpc_readb(scabase + M_REG(ST1, ch)); - - /* Clear MSCI interrupts */ - cpc_writeb(scabase + M_REG(ST1, ch), st1); - -#ifdef PC300_DEBUG_INTR - printk("sca_intr: MSCI intr chan[%d] (st=0x%08lx, st1=0x%02x)\n", - ch, status, st1); -#endif - if (st1 & ST1_CDCD) { /* DCD changed */ - if (cpc_readb(scabase + M_REG(ST3, ch)) & ST3_DCD) { - printk ("%s: DCD is OFF. Going administrative down.\n", - dev->name); -#ifdef CONFIG_PC300_MLPPP - if (chan->conf.proto != PC300_PROTO_MLPPP) { - netif_carrier_off(dev); - } -#else - netif_carrier_off(dev); - -#endif - card->chan[ch].d.line_off++; - } else { /* DCD = 1 */ - printk ("%s: DCD is ON. Going administrative up.\n", - dev->name); -#ifdef CONFIG_PC300_MLPPP - if (chan->conf.proto != PC300_PROTO_MLPPP) - /* verify if driver is not TTY */ -#endif - netif_carrier_on(dev); - card->chan[ch].d.line_on++; - } - } - } - spin_unlock(&card->card_lock); - } - if (++intr_count == 10) - /* Too much work at this board. Force exit */ - break; - } -} - -static void falc_t1_loop_detection(pc300_t *card, int ch, u8 frs1) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - falc_t *pfalc = (falc_t *) & chan->falc; - void __iomem *falcbase = card->hw.falcbase; - - if (((cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_XPRBS) == 0) && - !pfalc->loop_gen) { - if (frs1 & FRS1_LLBDD) { - // A Line Loop Back Deactivation signal detected - if (pfalc->loop_active) { - falc_remote_loop(card, ch, 0); - } - } else { - if ((frs1 & FRS1_LLBAD) && - ((cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_EPRM) == 0)) { - // A Line Loop Back Activation signal detected - if (!pfalc->loop_active) { - falc_remote_loop(card, ch, 1); - } - } - } - } -} - -static void falc_e1_loop_detection(pc300_t *card, int ch, u8 rsp) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - falc_t *pfalc = (falc_t *) & chan->falc; - void __iomem *falcbase = card->hw.falcbase; - - if (((cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_XPRBS) == 0) && - !pfalc->loop_gen) { - if (rsp & RSP_LLBDD) { - // A Line Loop Back Deactivation signal detected - if (pfalc->loop_active) { - falc_remote_loop(card, ch, 0); - } - } else { - if ((rsp & RSP_LLBAD) && - ((cpc_readb(falcbase + F_REG(LCR1, ch)) & LCR1_EPRM) == 0)) { - // A Line Loop Back Activation signal detected - if (!pfalc->loop_active) { - falc_remote_loop(card, ch, 1); - } - } - } - } -} - -static void falc_t1_intr(pc300_t * card, int ch) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - falc_t *pfalc = (falc_t *) & chan->falc; - void __iomem *falcbase = card->hw.falcbase; - u8 isr0, isr3, gis; - u8 dummy; - - while ((gis = cpc_readb(falcbase + F_REG(GIS, ch))) != 0) { - if (gis & GIS_ISR0) { - isr0 = cpc_readb(falcbase + F_REG(FISR0, ch)); - if (isr0 & FISR0_PDEN) { - /* Read the bit to clear the situation */ - if (cpc_readb(falcbase + F_REG(FRS1, ch)) & - FRS1_PDEN) { - pfalc->pden++; - } - } - } - - if (gis & GIS_ISR1) { - dummy = cpc_readb(falcbase + F_REG(FISR1, ch)); - } - - if (gis & GIS_ISR2) { - dummy = cpc_readb(falcbase + F_REG(FISR2, ch)); - } - - if (gis & GIS_ISR3) { - isr3 = cpc_readb(falcbase + F_REG(FISR3, ch)); - if (isr3 & FISR3_SEC) { - pfalc->sec++; - falc_update_stats(card, ch); - falc_check_status(card, ch, - cpc_readb(falcbase + F_REG(FRS0, ch))); - } - if (isr3 & FISR3_ES) { - pfalc->es++; - } - if (isr3 & FISR3_LLBSC) { - falc_t1_loop_detection(card, ch, - cpc_readb(falcbase + F_REG(FRS1, ch))); - } - } - } -} - -static void falc_e1_intr(pc300_t * card, int ch) -{ - pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; - falc_t *pfalc = (falc_t *) & chan->falc; - void __iomem *falcbase = card->hw.falcbase; - u8 isr1, isr2, isr3, gis, rsp; - u8 dummy; - - while ((gis = cpc_readb(falcbase + F_REG(GIS, ch))) != 0) { - rsp = cpc_readb(falcbase + F_REG(RSP, ch)); - - if (gis & GIS_ISR0) { - dummy = cpc_readb(falcbase + F_REG(FISR0, ch)); - } - if (gis & GIS_ISR1) { - isr1 = cpc_readb(falcbase + F_REG(FISR1, ch)); - if (isr1 & FISR1_XMB) { - if ((pfalc->xmb_cause & 2) && - pfalc->multiframe_mode) { - if (cpc_readb (falcbase + F_REG(FRS0, ch)) & - (FRS0_LOS | FRS0_AIS | FRS0_LFA)) { - cpc_writeb(falcbase + F_REG(XSP, ch), - cpc_readb(falcbase + F_REG(XSP, ch)) - & ~XSP_AXS); - } else { - cpc_writeb(falcbase + F_REG(XSP, ch), - cpc_readb(falcbase + F_REG(XSP, ch)) - | XSP_AXS); - } - } - pfalc->xmb_cause = 0; - cpc_writeb(falcbase + F_REG(IMR1, ch), - cpc_readb(falcbase + F_REG(IMR1, ch)) | IMR1_XMB); - } - if (isr1 & FISR1_LLBSC) { - falc_e1_loop_detection(card, ch, rsp); - } - } - if (gis & GIS_ISR2) { - isr2 = cpc_readb(falcbase + F_REG(FISR2, ch)); - if (isr2 & FISR2_T400MS) { - cpc_writeb(falcbase + F_REG(XSW, ch), - cpc_readb(falcbase + F_REG(XSW, ch)) | XSW_XRA); - } - if (isr2 & FISR2_MFAR) { - cpc_writeb(falcbase + F_REG(XSW, ch), - cpc_readb(falcbase + F_REG(XSW, ch)) & ~XSW_XRA); - } - if (isr2 & (FISR2_FAR | FISR2_LFA | FISR2_AIS | FISR2_LOS)) { - pfalc->xmb_cause |= 2; - cpc_writeb(falcbase + F_REG(IMR1, ch), - cpc_readb(falcbase + F_REG(IMR1, ch)) & ~IMR1_XMB); - } - } - if (gis & GIS_ISR3) { - isr3 = cpc_readb(falcbase + F_REG(FISR3, ch)); - if (isr3 & FISR3_SEC) { - pfalc->sec++; - falc_update_stats(card, ch); - falc_check_status(card, ch, - cpc_readb(falcbase + F_REG(FRS0, ch))); - } - if (isr3 & FISR3_ES) { - pfalc->es++; - } - } - } -} - -static void falc_intr(pc300_t * card) -{ - int ch; - - for (ch = 0; ch < card->hw.nchan; ch++) { - pc300ch_t *chan = &card->chan[ch]; - pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; - - if (conf->media == IF_IFACE_T1) { - falc_t1_intr(card, ch); - } else { - falc_e1_intr(card, ch); - } - } -} - -static irqreturn_t cpc_intr(int irq, void *dev_id) -{ - pc300_t *card = dev_id; - volatile u8 plx_status; - - if (!card) { -#ifdef PC300_DEBUG_INTR - printk("cpc_intr: spurious intr %d\n", irq); -#endif - return IRQ_NONE; /* spurious intr */ - } - - if (!card->hw.rambase) { -#ifdef PC300_DEBUG_INTR - printk("cpc_intr: spurious intr2 %d\n", irq); -#endif - return IRQ_NONE; /* spurious intr */ - } - - switch (card->hw.type) { - case PC300_RSV: - case PC300_X21: - sca_intr(card); - break; - - case PC300_TE: - while ( (plx_status = (cpc_readb(card->hw.plxbase + card->hw.intctl_reg) & - (PLX_9050_LINT1_STATUS | PLX_9050_LINT2_STATUS))) != 0) { - if (plx_status & PLX_9050_LINT1_STATUS) { /* SCA Interrupt */ - sca_intr(card); - } - if (plx_status & PLX_9050_LINT2_STATUS) { /* FALC Interrupt */ - falc_intr(card); - } - } - break; - } - return IRQ_HANDLED; -} - -static void cpc_sca_status(pc300_t * card, int ch) -{ - u8 ilar; - void __iomem *scabase = card->hw.scabase; - unsigned long flags; - - tx_dma_buf_check(card, ch); - rx_dma_buf_check(card, ch); - ilar = cpc_readb(scabase + ILAR); - printk ("ILAR=0x%02x, WCRL=0x%02x, PCR=0x%02x, BTCR=0x%02x, BOLR=0x%02x\n", - ilar, cpc_readb(scabase + WCRL), cpc_readb(scabase + PCR), - cpc_readb(scabase + BTCR), cpc_readb(scabase + BOLR)); - printk("TX_CDA=0x%08x, TX_EDA=0x%08x\n", - cpc_readl(scabase + DTX_REG(CDAL, ch)), - cpc_readl(scabase + DTX_REG(EDAL, ch))); - printk("RX_CDA=0x%08x, RX_EDA=0x%08x, BFL=0x%04x\n", - cpc_readl(scabase + DRX_REG(CDAL, ch)), - cpc_readl(scabase + DRX_REG(EDAL, ch)), - cpc_readw(scabase + DRX_REG(BFLL, ch))); - printk("DMER=0x%02x, DSR_TX=0x%02x, DSR_RX=0x%02x\n", - cpc_readb(scabase + DMER), cpc_readb(scabase + DSR_TX(ch)), - cpc_readb(scabase + DSR_RX(ch))); - printk("DMR_TX=0x%02x, DMR_RX=0x%02x, DIR_TX=0x%02x, DIR_RX=0x%02x\n", - cpc_readb(scabase + DMR_TX(ch)), cpc_readb(scabase + DMR_RX(ch)), - cpc_readb(scabase + DIR_TX(ch)), - cpc_readb(scabase + DIR_RX(ch))); - printk("DCR_TX=0x%02x, DCR_RX=0x%02x, FCT_TX=0x%02x, FCT_RX=0x%02x\n", - cpc_readb(scabase + DCR_TX(ch)), cpc_readb(scabase + DCR_RX(ch)), - cpc_readb(scabase + FCT_TX(ch)), - cpc_readb(scabase + FCT_RX(ch))); - printk("MD0=0x%02x, MD1=0x%02x, MD2=0x%02x, MD3=0x%02x, IDL=0x%02x\n", - cpc_readb(scabase + M_REG(MD0, ch)), - cpc_readb(scabase + M_REG(MD1, ch)), - cpc_readb(scabase + M_REG(MD2, ch)), - cpc_readb(scabase + M_REG(MD3, ch)), - cpc_readb(scabase + M_REG(IDL, ch))); - printk("CMD=0x%02x, SA0=0x%02x, SA1=0x%02x, TFN=0x%02x, CTL=0x%02x\n", - cpc_readb(scabase + M_REG(CMD, ch)), - cpc_readb(scabase + M_REG(SA0, ch)), - cpc_readb(scabase + M_REG(SA1, ch)), - cpc_readb(scabase + M_REG(TFN, ch)), - cpc_readb(scabase + M_REG(CTL, ch))); - printk("ST0=0x%02x, ST1=0x%02x, ST2=0x%02x, ST3=0x%02x, ST4=0x%02x\n", - cpc_readb(scabase + M_REG(ST0, ch)), - cpc_readb(scabase + M_REG(ST1, ch)), - cpc_readb(scabase + M_REG(ST2, ch)), - cpc_readb(scabase + M_REG(ST3, ch)), - cpc_readb(scabase + M_REG(ST4, ch))); - printk ("CST0=0x%02x, CST1=0x%02x, CST2=0x%02x, CST3=0x%02x, FST=0x%02x\n", - cpc_readb(scabase + M_REG(CST0, ch)), - cpc_readb(scabase + M_REG(CST1, ch)), - cpc_readb(scabase + M_REG(CST2, ch)), - cpc_readb(scabase + M_REG(CST3, ch)), - cpc_readb(scabase + M_REG(FST, ch))); - printk("TRC0=0x%02x, TRC1=0x%02x, RRC=0x%02x, TBN=0x%02x, RBN=0x%02x\n", - cpc_readb(scabase + M_REG(TRC0, ch)), - cpc_readb(scabase + M_REG(TRC1, ch)), - cpc_readb(scabase + M_REG(RRC, ch)), - cpc_readb(scabase + M_REG(TBN, ch)), - cpc_readb(scabase + M_REG(RBN, ch))); - printk("TFS=0x%02x, TNR0=0x%02x, TNR1=0x%02x, RNR=0x%02x\n", - cpc_readb(scabase + M_REG(TFS, ch)), - cpc_readb(scabase + M_REG(TNR0, ch)), - cpc_readb(scabase + M_REG(TNR1, ch)), - cpc_readb(scabase + M_REG(RNR, ch))); - printk("TCR=0x%02x, RCR=0x%02x, TNR1=0x%02x, RNR=0x%02x\n", - cpc_readb(scabase + M_REG(TCR, ch)), - cpc_readb(scabase + M_REG(RCR, ch)), - cpc_readb(scabase + M_REG(TNR1, ch)), - cpc_readb(scabase + M_REG(RNR, ch))); - printk("TXS=0x%02x, RXS=0x%02x, EXS=0x%02x, TMCT=0x%02x, TMCR=0x%02x\n", - cpc_readb(scabase + M_REG(TXS, ch)), - cpc_readb(scabase + M_REG(RXS, ch)), - cpc_readb(scabase + M_REG(EXS, ch)), - cpc_readb(scabase + M_REG(TMCT, ch)), - cpc_readb(scabase + M_REG(TMCR, ch))); - printk("IE0=0x%02x, IE1=0x%02x, IE2=0x%02x, IE4=0x%02x, FIE=0x%02x\n", - cpc_readb(scabase + M_REG(IE0, ch)), - cpc_readb(scabase + M_REG(IE1, ch)), - cpc_readb(scabase + M_REG(IE2, ch)), - cpc_readb(scabase + M_REG(IE4, ch)), - cpc_readb(scabase + M_REG(FIE, ch))); - printk("IER0=0x%08x\n", cpc_readl(scabase + IER0)); - - if (ilar != 0) { - CPC_LOCK(card, flags); - cpc_writeb(scabase + ILAR, ilar); - cpc_writeb(scabase + DMER, 0x80); - CPC_UNLOCK(card, flags); - } -} - -static void cpc_falc_status(pc300_t * card, int ch) -{ - pc300ch_t *chan = &card->chan[ch]; - falc_t *pfalc = (falc_t *) & chan->falc; - unsigned long flags; - - CPC_LOCK(card, flags); - printk("CH%d: %s %s %d channels\n", - ch, (pfalc->sync ? "SYNC" : ""), (pfalc->active ? "ACTIVE" : ""), - pfalc->num_channels); - - printk(" pden=%d, los=%d, losr=%d, lfa=%d, farec=%d\n", - pfalc->pden, pfalc->los, pfalc->losr, pfalc->lfa, pfalc->farec); - printk(" lmfa=%d, ais=%d, sec=%d, es=%d, rai=%d\n", - pfalc->lmfa, pfalc->ais, pfalc->sec, pfalc->es, pfalc->rai); - printk(" bec=%d, fec=%d, cvc=%d, cec=%d, ebc=%d\n", - pfalc->bec, pfalc->fec, pfalc->cvc, pfalc->cec, pfalc->ebc); - - printk("\n"); - printk(" STATUS: %s %s %s %s %s %s\n", - (pfalc->red_alarm ? "RED" : ""), - (pfalc->blue_alarm ? "BLU" : ""), - (pfalc->yellow_alarm ? "YEL" : ""), - (pfalc->loss_fa ? "LFA" : ""), - (pfalc->loss_mfa ? "LMF" : ""), (pfalc->prbs ? "PRB" : "")); - CPC_UNLOCK(card, flags); -} - -static int cpc_change_mtu(struct net_device *dev, int new_mtu) -{ - if ((new_mtu < 128) || (new_mtu > PC300_DEF_MTU)) - return -EINVAL; - dev->mtu = new_mtu; - return 0; -} - -static int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv; - pc300ch_t *chan = (pc300ch_t *) d->chan; - pc300_t *card = (pc300_t *) chan->card; - pc300conf_t conf_aux; - pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; - int ch = chan->channel; - void __user *arg = ifr->ifr_data; - struct if_settings *settings = &ifr->ifr_settings; - void __iomem *scabase = card->hw.scabase; - - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - - switch (cmd) { - case SIOCGPC300CONF: -#ifdef CONFIG_PC300_MLPPP - if (conf->proto != PC300_PROTO_MLPPP) { - conf->proto = /* FIXME hdlc->proto.id */ 0; - } -#else - conf->proto = /* FIXME hdlc->proto.id */ 0; -#endif - memcpy(&conf_aux.conf, conf, sizeof(pc300chconf_t)); - memcpy(&conf_aux.hw, &card->hw, sizeof(pc300hw_t)); - if (!arg || - copy_to_user(arg, &conf_aux, sizeof(pc300conf_t))) - return -EINVAL; - return 0; - case SIOCSPC300CONF: - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - if (!arg || - copy_from_user(&conf_aux.conf, arg, sizeof(pc300chconf_t))) - return -EINVAL; - if (card->hw.cpld_id < 0x02 && - conf_aux.conf.fr_mode == PC300_FR_UNFRAMED) { - /* CPLD_ID < 0x02 doesn't support Unframed E1 */ - return -EINVAL; - } -#ifdef CONFIG_PC300_MLPPP - if (conf_aux.conf.proto == PC300_PROTO_MLPPP) { - if (conf->proto != PC300_PROTO_MLPPP) { - memcpy(conf, &conf_aux.conf, sizeof(pc300chconf_t)); - cpc_tty_init(d); /* init TTY driver */ - } - } else { - if (conf_aux.conf.proto == 0xffff) { - if (conf->proto == PC300_PROTO_MLPPP){ - /* ifdown interface */ - cpc_close(dev); - } - } else { - memcpy(conf, &conf_aux.conf, sizeof(pc300chconf_t)); - /* FIXME hdlc->proto.id = conf->proto; */ - } - } -#else - memcpy(conf, &conf_aux.conf, sizeof(pc300chconf_t)); - /* FIXME hdlc->proto.id = conf->proto; */ -#endif - return 0; - case SIOCGPC300STATUS: - cpc_sca_status(card, ch); - return 0; - case SIOCGPC300FALCSTATUS: - cpc_falc_status(card, ch); - return 0; - - case SIOCGPC300UTILSTATS: - { - if (!arg) { /* clear statistics */ - memset(&dev->stats, 0, sizeof(dev->stats)); - if (card->hw.type == PC300_TE) { - memset(&chan->falc, 0, sizeof(falc_t)); - } - } else { - pc300stats_t pc300stats; - - memset(&pc300stats, 0, sizeof(pc300stats_t)); - pc300stats.hw_type = card->hw.type; - pc300stats.line_on = card->chan[ch].d.line_on; - pc300stats.line_off = card->chan[ch].d.line_off; - memcpy(&pc300stats.gen_stats, &dev->stats, - sizeof(dev->stats)); - if (card->hw.type == PC300_TE) - memcpy(&pc300stats.te_stats,&chan->falc,sizeof(falc_t)); - if (copy_to_user(arg, &pc300stats, sizeof(pc300stats_t))) - return -EFAULT; - } - return 0; - } - - case SIOCGPC300UTILSTATUS: - { - struct pc300status pc300status; - - pc300status.hw_type = card->hw.type; - if (card->hw.type == PC300_TE) { - pc300status.te_status.sync = chan->falc.sync; - pc300status.te_status.red_alarm = chan->falc.red_alarm; - pc300status.te_status.blue_alarm = chan->falc.blue_alarm; - pc300status.te_status.loss_fa = chan->falc.loss_fa; - pc300status.te_status.yellow_alarm =chan->falc.yellow_alarm; - pc300status.te_status.loss_mfa = chan->falc.loss_mfa; - pc300status.te_status.prbs = chan->falc.prbs; - } else { - pc300status.gen_status.dcd = - !(cpc_readb (scabase + M_REG(ST3, ch)) & ST3_DCD); - pc300status.gen_status.cts = - !(cpc_readb (scabase + M_REG(ST3, ch)) & ST3_CTS); - pc300status.gen_status.rts = - !(cpc_readb (scabase + M_REG(CTL, ch)) & CTL_RTS); - pc300status.gen_status.dtr = - !(cpc_readb (scabase + M_REG(CTL, ch)) & CTL_DTR); - /* There is no DSR in HD64572 */ - } - if (!arg || - copy_to_user(arg, &pc300status, sizeof(pc300status_t))) - return -EINVAL; - return 0; - } - - case SIOCSPC300TRACE: - /* Sets/resets a trace_flag for the respective device */ - if (!arg || copy_from_user(&d->trace_on, arg,sizeof(unsigned char))) - return -EINVAL; - return 0; - - case SIOCSPC300LOOPBACK: - { - struct pc300loopback pc300loop; - - /* TE boards only */ - if (card->hw.type != PC300_TE) - return -EINVAL; - - if (!arg || - copy_from_user(&pc300loop, arg, sizeof(pc300loopback_t))) - return -EINVAL; - switch (pc300loop.loop_type) { - case PC300LOCLOOP: /* Turn the local loop on/off */ - falc_local_loop(card, ch, pc300loop.loop_on); - return 0; - - case PC300REMLOOP: /* Turn the remote loop on/off */ - falc_remote_loop(card, ch, pc300loop.loop_on); - return 0; - - case PC300PAYLOADLOOP: /* Turn the payload loop on/off */ - falc_payload_loop(card, ch, pc300loop.loop_on); - return 0; - - case PC300GENLOOPUP: /* Generate loop UP */ - if (pc300loop.loop_on) { - falc_generate_loop_up_code (card, ch); - } else { - turn_off_xlu(card, ch); - } - return 0; - - case PC300GENLOOPDOWN: /* Generate loop DOWN */ - if (pc300loop.loop_on) { - falc_generate_loop_down_code (card, ch); - } else { - turn_off_xld(card, ch); - } - return 0; - - default: - return -EINVAL; - } - } - - case SIOCSPC300PATTERNTEST: - /* Turn the pattern test on/off and show the errors counter */ - { - struct pc300patterntst pc300patrntst; - - /* TE boards only */ - if (card->hw.type != PC300_TE) - return -EINVAL; - - if (card->hw.cpld_id < 0x02) { - /* CPLD_ID < 0x02 doesn't support pattern test */ - return -EINVAL; - } - - if (!arg || - copy_from_user(&pc300patrntst,arg,sizeof(pc300patterntst_t))) - return -EINVAL; - if (pc300patrntst.patrntst_on == 2) { - if (chan->falc.prbs == 0) { - falc_pattern_test(card, ch, 1); - } - pc300patrntst.num_errors = - falc_pattern_test_error(card, ch); - if (copy_to_user(arg, &pc300patrntst, - sizeof(pc300patterntst_t))) - return -EINVAL; - } else { - falc_pattern_test(card, ch, pc300patrntst.patrntst_on); - } - return 0; - } - - case SIOCWANDEV: - switch (ifr->ifr_settings.type) { - case IF_GET_IFACE: - { - const size_t size = sizeof(sync_serial_settings); - ifr->ifr_settings.type = conf->media; - if (ifr->ifr_settings.size < size) { - /* data size wanted */ - ifr->ifr_settings.size = size; - return -ENOBUFS; - } - - if (copy_to_user(settings->ifs_ifsu.sync, - &conf->phys_settings, size)) { - return -EFAULT; - } - return 0; - } - - case IF_IFACE_V35: - case IF_IFACE_V24: - case IF_IFACE_X21: - { - const size_t size = sizeof(sync_serial_settings); - - if (!capable(CAP_NET_ADMIN)) { - return -EPERM; - } - /* incorrect data len? */ - if (ifr->ifr_settings.size != size) { - return -ENOBUFS; - } - - if (copy_from_user(&conf->phys_settings, - settings->ifs_ifsu.sync, size)) { - return -EFAULT; - } - - if (conf->phys_settings.loopback) { - cpc_writeb(card->hw.scabase + M_REG(MD2, ch), - cpc_readb(card->hw.scabase + M_REG(MD2, ch)) | - MD2_LOOP_MIR); - } - conf->media = ifr->ifr_settings.type; - return 0; - } - - case IF_IFACE_T1: - case IF_IFACE_E1: - { - const size_t te_size = sizeof(te1_settings); - const size_t size = sizeof(sync_serial_settings); - - if (!capable(CAP_NET_ADMIN)) { - return -EPERM; - } - - /* incorrect data len? */ - if (ifr->ifr_settings.size != te_size) { - return -ENOBUFS; - } - - if (copy_from_user(&conf->phys_settings, - settings->ifs_ifsu.te1, size)) { - return -EFAULT; - }/* Ignoring HDLC slot_map for a while */ - - if (conf->phys_settings.loopback) { - cpc_writeb(card->hw.scabase + M_REG(MD2, ch), - cpc_readb(card->hw.scabase + M_REG(MD2, ch)) | - MD2_LOOP_MIR); - } - conf->media = ifr->ifr_settings.type; - return 0; - } - default: - return hdlc_ioctl(dev, ifr, cmd); - } - - default: - return hdlc_ioctl(dev, ifr, cmd); - } -} - -static int clock_rate_calc(u32 rate, u32 clock, int *br_io) -{ - int br, tc; - int br_pwr, error; - - *br_io = 0; - - if (rate == 0) - return 0; - - for (br = 0, br_pwr = 1; br <= 9; br++, br_pwr <<= 1) { - if ((tc = clock / br_pwr / rate) <= 0xff) { - *br_io = br; - break; - } - } - - if (tc <= 0xff) { - error = ((rate - (clock / br_pwr / rate)) / rate) * 1000; - /* Errors bigger than +/- 1% won't be tolerated */ - if (error < -10 || error > 10) - return -1; - else - return tc; - } else { - return -1; - } -} - -static int ch_config(pc300dev_t * d) -{ - pc300ch_t *chan = (pc300ch_t *) d->chan; - pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; - pc300_t *card = (pc300_t *) chan->card; - void __iomem *scabase = card->hw.scabase; - void __iomem *plxbase = card->hw.plxbase; - int ch = chan->channel; - u32 clkrate = chan->conf.phys_settings.clock_rate; - u32 clktype = chan->conf.phys_settings.clock_type; - u16 encoding = chan->conf.proto_settings.encoding; - u16 parity = chan->conf.proto_settings.parity; - u8 md0, md2; - - /* Reset the channel */ - cpc_writeb(scabase + M_REG(CMD, ch), CMD_CH_RST); - - /* Configure the SCA registers */ - switch (parity) { - case PARITY_NONE: - md0 = MD0_BIT_SYNC; - break; - case PARITY_CRC16_PR0: - md0 = MD0_CRC16_0|MD0_CRCC0|MD0_BIT_SYNC; - break; - case PARITY_CRC16_PR1: - md0 = MD0_CRC16_1|MD0_CRCC0|MD0_BIT_SYNC; - break; - case PARITY_CRC32_PR1_CCITT: - md0 = MD0_CRC32|MD0_CRCC0|MD0_BIT_SYNC; - break; - case PARITY_CRC16_PR1_CCITT: - default: - md0 = MD0_CRC_CCITT|MD0_CRCC0|MD0_BIT_SYNC; - break; - } - switch (encoding) { - case ENCODING_NRZI: - md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_NRZI; - break; - case ENCODING_FM_MARK: /* FM1 */ - md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_FM|MD2_FM1; - break; - case ENCODING_FM_SPACE: /* FM0 */ - md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_FM|MD2_FM0; - break; - case ENCODING_MANCHESTER: /* It's not working... */ - md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_FM|MD2_MANCH; - break; - case ENCODING_NRZ: - default: - md2 = MD2_F_DUPLEX|MD2_ADPLL_X8|MD2_NRZ; - break; - } - cpc_writeb(scabase + M_REG(MD0, ch), md0); - cpc_writeb(scabase + M_REG(MD1, ch), 0); - cpc_writeb(scabase + M_REG(MD2, ch), md2); - cpc_writeb(scabase + M_REG(IDL, ch), 0x7e); - cpc_writeb(scabase + M_REG(CTL, ch), CTL_URSKP | CTL_IDLC); - - /* Configure HW media */ - switch (card->hw.type) { - case PC300_RSV: - if (conf->media == IF_IFACE_V35) { - cpc_writel((plxbase + card->hw.gpioc_reg), - cpc_readl(plxbase + card->hw.gpioc_reg) | PC300_CHMEDIA_MASK(ch)); - } else { - cpc_writel((plxbase + card->hw.gpioc_reg), - cpc_readl(plxbase + card->hw.gpioc_reg) & ~PC300_CHMEDIA_MASK(ch)); - } - break; - - case PC300_X21: - break; - - case PC300_TE: - te_config(card, ch); - break; - } - - switch (card->hw.type) { - case PC300_RSV: - case PC300_X21: - if (clktype == CLOCK_INT || clktype == CLOCK_TXINT) { - int tmc, br; - - /* Calculate the clkrate parameters */ - tmc = clock_rate_calc(clkrate, card->hw.clock, &br); - if (tmc < 0) - return -EIO; - cpc_writeb(scabase + M_REG(TMCT, ch), tmc); - cpc_writeb(scabase + M_REG(TXS, ch), - (TXS_DTRXC | TXS_IBRG | br)); - if (clktype == CLOCK_INT) { - cpc_writeb(scabase + M_REG(TMCR, ch), tmc); - cpc_writeb(scabase + M_REG(RXS, ch), - (RXS_IBRG | br)); - } else { - cpc_writeb(scabase + M_REG(TMCR, ch), 1); - cpc_writeb(scabase + M_REG(RXS, ch), 0); - } - if (card->hw.type == PC300_X21) { - cpc_writeb(scabase + M_REG(GPO, ch), 1); - cpc_writeb(scabase + M_REG(EXS, ch), EXS_TES1 | EXS_RES1); - } else { - cpc_writeb(scabase + M_REG(EXS, ch), EXS_TES1); - } - } else { - cpc_writeb(scabase + M_REG(TMCT, ch), 1); - if (clktype == CLOCK_EXT) { - cpc_writeb(scabase + M_REG(TXS, ch), - TXS_DTRXC); - } else { - cpc_writeb(scabase + M_REG(TXS, ch), - TXS_DTRXC|TXS_RCLK); - } - cpc_writeb(scabase + M_REG(TMCR, ch), 1); - cpc_writeb(scabase + M_REG(RXS, ch), 0); - if (card->hw.type == PC300_X21) { - cpc_writeb(scabase + M_REG(GPO, ch), 0); - cpc_writeb(scabase + M_REG(EXS, ch), EXS_TES1 | EXS_RES1); - } else { - cpc_writeb(scabase + M_REG(EXS, ch), EXS_TES1); - } - } - break; - - case PC300_TE: - /* SCA always receives clock from the FALC chip */ - cpc_writeb(scabase + M_REG(TMCT, ch), 1); - cpc_writeb(scabase + M_REG(TXS, ch), 0); - cpc_writeb(scabase + M_REG(TMCR, ch), 1); - cpc_writeb(scabase + M_REG(RXS, ch), 0); - cpc_writeb(scabase + M_REG(EXS, ch), 0); - break; - } - - /* Enable Interrupts */ - cpc_writel(scabase + IER0, - cpc_readl(scabase + IER0) | - IR0_M(IR0_RXINTA, ch) | - IR0_DRX(IR0_EFT | IR0_DMIA | IR0_DMIB, ch) | - IR0_DTX(IR0_EFT | IR0_DMIA | IR0_DMIB, ch)); - cpc_writeb(scabase + M_REG(IE0, ch), - cpc_readl(scabase + M_REG(IE0, ch)) | IE0_RXINTA); - cpc_writeb(scabase + M_REG(IE1, ch), - cpc_readl(scabase + M_REG(IE1, ch)) | IE1_CDCD); - - return 0; -} - -static int rx_config(pc300dev_t * d) -{ - pc300ch_t *chan = (pc300ch_t *) d->chan; - pc300_t *card = (pc300_t *) chan->card; - void __iomem *scabase = card->hw.scabase; - int ch = chan->channel; - - cpc_writeb(scabase + DSR_RX(ch), 0); - - /* General RX settings */ - cpc_writeb(scabase + M_REG(RRC, ch), 0); - cpc_writeb(scabase + M_REG(RNR, ch), 16); - - /* Enable reception */ - cpc_writeb(scabase + M_REG(CMD, ch), CMD_RX_CRC_INIT); - cpc_writeb(scabase + M_REG(CMD, ch), CMD_RX_ENA); - - /* Initialize DMA stuff */ - chan->rx_first_bd = 0; - chan->rx_last_bd = N_DMA_RX_BUF - 1; - rx_dma_buf_init(card, ch); - cpc_writeb(scabase + DCR_RX(ch), DCR_FCT_CLR); - cpc_writeb(scabase + DMR_RX(ch), (DMR_TMOD | DMR_NF)); - cpc_writeb(scabase + DIR_RX(ch), (DIR_EOM | DIR_BOF)); - - /* Start DMA */ - rx_dma_start(card, ch); - - return 0; -} - -static int tx_config(pc300dev_t * d) -{ - pc300ch_t *chan = (pc300ch_t *) d->chan; - pc300_t *card = (pc300_t *) chan->card; - void __iomem *scabase = card->hw.scabase; - int ch = chan->channel; - - cpc_writeb(scabase + DSR_TX(ch), 0); - - /* General TX settings */ - cpc_writeb(scabase + M_REG(TRC0, ch), 0); - cpc_writeb(scabase + M_REG(TFS, ch), 32); - cpc_writeb(scabase + M_REG(TNR0, ch), 20); - cpc_writeb(scabase + M_REG(TNR1, ch), 48); - cpc_writeb(scabase + M_REG(TCR, ch), 8); - - /* Enable transmission */ - cpc_writeb(scabase + M_REG(CMD, ch), CMD_TX_CRC_INIT); - - /* Initialize DMA stuff */ - chan->tx_first_bd = 0; - chan->tx_next_bd = 0; - tx_dma_buf_init(card, ch); - cpc_writeb(scabase + DCR_TX(ch), DCR_FCT_CLR); - cpc_writeb(scabase + DMR_TX(ch), (DMR_TMOD | DMR_NF)); - cpc_writeb(scabase + DIR_TX(ch), (DIR_EOM | DIR_BOF | DIR_UDRF)); - cpc_writel(scabase + DTX_REG(CDAL, ch), TX_BD_ADDR(ch, chan->tx_first_bd)); - cpc_writel(scabase + DTX_REG(EDAL, ch), TX_BD_ADDR(ch, chan->tx_next_bd)); - - return 0; -} - -static int cpc_attach(struct net_device *dev, unsigned short encoding, - unsigned short parity) -{ - pc300dev_t *d = (pc300dev_t *)dev_to_hdlc(dev)->priv; - pc300ch_t *chan = (pc300ch_t *)d->chan; - pc300_t *card = (pc300_t *)chan->card; - pc300chconf_t *conf = (pc300chconf_t *)&chan->conf; - - if (card->hw.type == PC300_TE) { - if (encoding != ENCODING_NRZ && encoding != ENCODING_NRZI) { - return -EINVAL; - } - } else { - if (encoding != ENCODING_NRZ && encoding != ENCODING_NRZI && - encoding != ENCODING_FM_MARK && encoding != ENCODING_FM_SPACE) { - /* Driver doesn't support ENCODING_MANCHESTER yet */ - return -EINVAL; - } - } - - if (parity != PARITY_NONE && parity != PARITY_CRC16_PR0 && - parity != PARITY_CRC16_PR1 && parity != PARITY_CRC32_PR1_CCITT && - parity != PARITY_CRC16_PR1_CCITT) { - return -EINVAL; - } - - conf->proto_settings.encoding = encoding; - conf->proto_settings.parity = parity; - return 0; -} - -static int cpc_opench(pc300dev_t * d) -{ - pc300ch_t *chan = (pc300ch_t *) d->chan; - pc300_t *card = (pc300_t *) chan->card; - int ch = chan->channel, rc; - void __iomem *scabase = card->hw.scabase; - - rc = ch_config(d); - if (rc) - return rc; - - rx_config(d); - - tx_config(d); - - /* Assert RTS and DTR */ - cpc_writeb(scabase + M_REG(CTL, ch), - cpc_readb(scabase + M_REG(CTL, ch)) & ~(CTL_RTS | CTL_DTR)); - - return 0; -} - -static void cpc_closech(pc300dev_t * d) -{ - pc300ch_t *chan = (pc300ch_t *) d->chan; - pc300_t *card = (pc300_t *) chan->card; - falc_t *pfalc = (falc_t *) & chan->falc; - int ch = chan->channel; - - cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_CH_RST); - rx_dma_stop(card, ch); - tx_dma_stop(card, ch); - - if (card->hw.type == PC300_TE) { - memset(pfalc, 0, sizeof(falc_t)); - cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, - cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) & - ~((CPLD_REG2_FALC_TX_CLK | CPLD_REG2_FALC_RX_CLK | - CPLD_REG2_FALC_LED2) << (2 * ch))); - /* Reset the FALC chip */ - cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, - cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) | - (CPLD_REG1_FALC_RESET << (2 * ch))); - udelay(10000); - cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, - cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) & - ~(CPLD_REG1_FALC_RESET << (2 * ch))); - } -} - -int cpc_open(struct net_device *dev) -{ - pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv; - struct ifreq ifr; - int result; - -#ifdef PC300_DEBUG_OTHER - printk("pc300: cpc_open"); -#endif - - result = hdlc_open(dev); - - if (result) - return result; - - sprintf(ifr.ifr_name, "%s", dev->name); - result = cpc_opench(d); - if (result) - goto err_out; - - netif_start_queue(dev); - return 0; - -err_out: - hdlc_close(dev); - return result; -} - -static int cpc_close(struct net_device *dev) -{ - pc300dev_t *d = (pc300dev_t *) dev_to_hdlc(dev)->priv; - pc300ch_t *chan = (pc300ch_t *) d->chan; - pc300_t *card = (pc300_t *) chan->card; - unsigned long flags; - -#ifdef PC300_DEBUG_OTHER - printk("pc300: cpc_close"); -#endif - - netif_stop_queue(dev); - - CPC_LOCK(card, flags); - cpc_closech(d); - CPC_UNLOCK(card, flags); - - hdlc_close(dev); - -#ifdef CONFIG_PC300_MLPPP - if (chan->conf.proto == PC300_PROTO_MLPPP) { - cpc_tty_unregister_service(d); - chan->conf.proto = 0xffff; - } -#endif - - return 0; -} - -static u32 detect_ram(pc300_t * card) -{ - u32 i; - u8 data; - void __iomem *rambase = card->hw.rambase; - - card->hw.ramsize = PC300_RAMSIZE; - /* Let's find out how much RAM is present on this board */ - for (i = 0; i < card->hw.ramsize; i++) { - data = (u8)(i & 0xff); - cpc_writeb(rambase + i, data); - if (cpc_readb(rambase + i) != data) { - break; - } - } - return i; -} - -static void plx_init(pc300_t * card) -{ - struct RUNTIME_9050 __iomem *plx_ctl = card->hw.plxbase; - - /* Reset PLX */ - cpc_writel(&plx_ctl->init_ctrl, - cpc_readl(&plx_ctl->init_ctrl) | 0x40000000); - udelay(10000L); - cpc_writel(&plx_ctl->init_ctrl, - cpc_readl(&plx_ctl->init_ctrl) & ~0x40000000); - - /* Reload Config. Registers from EEPROM */ - cpc_writel(&plx_ctl->init_ctrl, - cpc_readl(&plx_ctl->init_ctrl) | 0x20000000); - udelay(10000L); - cpc_writel(&plx_ctl->init_ctrl, - cpc_readl(&plx_ctl->init_ctrl) & ~0x20000000); - -} - -static void show_version(void) -{ - char *rcsvers, *rcsdate, *tmp; - - rcsvers = strchr(rcsid, ' '); - rcsvers++; - tmp = strchr(rcsvers, ' '); - *tmp++ = '\0'; - rcsdate = strchr(tmp, ' '); - rcsdate++; - tmp = strrchr(rcsdate, ' '); - *tmp = '\0'; - pr_info("Cyclades-PC300 driver %s %s\n", rcsvers, rcsdate); -} /* show_version */ - -static const struct net_device_ops cpc_netdev_ops = { - .ndo_open = cpc_open, - .ndo_stop = cpc_close, - .ndo_tx_timeout = cpc_tx_timeout, - .ndo_set_mac_address = NULL, - .ndo_change_mtu = cpc_change_mtu, - .ndo_do_ioctl = cpc_ioctl, - .ndo_validate_addr = eth_validate_addr, -}; - -static void cpc_init_card(pc300_t * card) -{ - int i, devcount = 0; - static int board_nbr = 1; - - /* Enable interrupts on the PCI bridge */ - plx_init(card); - cpc_writew(card->hw.plxbase + card->hw.intctl_reg, - cpc_readw(card->hw.plxbase + card->hw.intctl_reg) | 0x0040); - -#ifdef USE_PCI_CLOCK - /* Set board clock to PCI clock */ - cpc_writel(card->hw.plxbase + card->hw.gpioc_reg, - cpc_readl(card->hw.plxbase + card->hw.gpioc_reg) | 0x00000004UL); - card->hw.clock = PC300_PCI_CLOCK; -#else - /* Set board clock to internal oscillator clock */ - cpc_writel(card->hw.plxbase + card->hw.gpioc_reg, - cpc_readl(card->hw.plxbase + card->hw.gpioc_reg) & ~0x00000004UL); - card->hw.clock = PC300_OSC_CLOCK; -#endif - - /* Detect actual on-board RAM size */ - card->hw.ramsize = detect_ram(card); - - /* Set Global SCA-II registers */ - cpc_writeb(card->hw.scabase + PCR, PCR_PR2); - cpc_writeb(card->hw.scabase + BTCR, 0x10); - cpc_writeb(card->hw.scabase + WCRL, 0); - cpc_writeb(card->hw.scabase + DMER, 0x80); - - if (card->hw.type == PC300_TE) { - u8 reg1; - - /* Check CPLD version */ - reg1 = cpc_readb(card->hw.falcbase + CPLD_REG1); - cpc_writeb(card->hw.falcbase + CPLD_REG1, (reg1 + 0x5a)); - if (cpc_readb(card->hw.falcbase + CPLD_REG1) == reg1) { - /* New CPLD */ - card->hw.cpld_id = cpc_readb(card->hw.falcbase + CPLD_ID_REG); - card->hw.cpld_reg1 = CPLD_V2_REG1; - card->hw.cpld_reg2 = CPLD_V2_REG2; - } else { - /* old CPLD */ - card->hw.cpld_id = 0; - card->hw.cpld_reg1 = CPLD_REG1; - card->hw.cpld_reg2 = CPLD_REG2; - cpc_writeb(card->hw.falcbase + CPLD_REG1, reg1); - } - - /* Enable the board's global clock */ - cpc_writeb(card->hw.falcbase + card->hw.cpld_reg1, - cpc_readb(card->hw.falcbase + card->hw.cpld_reg1) | - CPLD_REG1_GLOBAL_CLK); - - } - - for (i = 0; i < card->hw.nchan; i++) { - pc300ch_t *chan = &card->chan[i]; - pc300dev_t *d = &chan->d; - hdlc_device *hdlc; - struct net_device *dev; - - chan->card = card; - chan->channel = i; - chan->conf.phys_settings.clock_rate = 0; - chan->conf.phys_settings.clock_type = CLOCK_EXT; - chan->conf.proto_settings.encoding = ENCODING_NRZ; - chan->conf.proto_settings.parity = PARITY_CRC16_PR1_CCITT; - switch (card->hw.type) { - case PC300_TE: - chan->conf.media = IF_IFACE_T1; - chan->conf.lcode = PC300_LC_B8ZS; - chan->conf.fr_mode = PC300_FR_ESF; - chan->conf.lbo = PC300_LBO_0_DB; - chan->conf.rx_sens = PC300_RX_SENS_SH; - chan->conf.tslot_bitmap = 0xffffffffUL; - break; - - case PC300_X21: - chan->conf.media = IF_IFACE_X21; - break; - - case PC300_RSV: - default: - chan->conf.media = IF_IFACE_V35; - break; - } - chan->conf.proto = IF_PROTO_PPP; - chan->tx_first_bd = 0; - chan->tx_next_bd = 0; - chan->rx_first_bd = 0; - chan->rx_last_bd = N_DMA_RX_BUF - 1; - chan->nfree_tx_bd = N_DMA_TX_BUF; - - d->chan = chan; - d->trace_on = 0; - d->line_on = 0; - d->line_off = 0; - - dev = alloc_hdlcdev(d); - if (dev == NULL) - continue; - - hdlc = dev_to_hdlc(dev); - hdlc->xmit = cpc_queue_xmit; - hdlc->attach = cpc_attach; - d->dev = dev; - dev->mem_start = card->hw.ramphys; - dev->mem_end = card->hw.ramphys + card->hw.ramsize - 1; - dev->irq = card->hw.irq; - dev->tx_queue_len = PC300_TX_QUEUE_LEN; - dev->mtu = PC300_DEF_MTU; - - dev->netdev_ops = &cpc_netdev_ops; - dev->watchdog_timeo = PC300_TX_TIMEOUT; - - if (register_hdlc_device(dev) == 0) { - printk("%s: Cyclades-PC300/", dev->name); - switch (card->hw.type) { - case PC300_TE: - if (card->hw.bus == PC300_PMC) { - printk("TE-M"); - } else { - printk("TE "); - } - break; - - case PC300_X21: - printk("X21 "); - break; - - case PC300_RSV: - default: - printk("RSV "); - break; - } - printk (" #%d, %dKB of RAM at 0x%08x, IRQ%d, channel %d.\n", - board_nbr, card->hw.ramsize / 1024, - card->hw.ramphys, card->hw.irq, i + 1); - devcount++; - } else { - printk ("Dev%d on card(0x%08x): unable to allocate i/f name.\n", - i + 1, card->hw.ramphys); - free_netdev(dev); - continue; - } - } - spin_lock_init(&card->card_lock); - - board_nbr++; -} - -static int __devinit -cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - int err, eeprom_outdated = 0; - u16 device_id; - pc300_t *card; - - if ((err = pci_enable_device(pdev)) < 0) - return err; - - card = kzalloc(sizeof(pc300_t), GFP_KERNEL); - if (card == NULL) { - printk("PC300 found at RAM 0x%016llx, " - "but could not allocate card structure.\n", - (unsigned long long)pci_resource_start(pdev, 3)); - err = -ENOMEM; - goto err_disable_dev; - } - - err = -ENODEV; - - /* read PCI configuration area */ - device_id = ent->device; - card->hw.irq = pdev->irq; - card->hw.iophys = pci_resource_start(pdev, 1); - card->hw.iosize = pci_resource_len(pdev, 1); - card->hw.scaphys = pci_resource_start(pdev, 2); - card->hw.scasize = pci_resource_len(pdev, 2); - card->hw.ramphys = pci_resource_start(pdev, 3); - card->hw.alloc_ramsize = pci_resource_len(pdev, 3); - card->hw.falcphys = pci_resource_start(pdev, 4); - card->hw.falcsize = pci_resource_len(pdev, 4); - card->hw.plxphys = pci_resource_start(pdev, 5); - card->hw.plxsize = pci_resource_len(pdev, 5); - - switch (device_id) { - case PCI_DEVICE_ID_PC300_RX_1: - case PCI_DEVICE_ID_PC300_TE_1: - case PCI_DEVICE_ID_PC300_TE_M_1: - card->hw.nchan = 1; - break; - - case PCI_DEVICE_ID_PC300_RX_2: - case PCI_DEVICE_ID_PC300_TE_2: - case PCI_DEVICE_ID_PC300_TE_M_2: - default: - card->hw.nchan = PC300_MAXCHAN; - break; - } -#ifdef PC300_DEBUG_PCI - printk("cpc (bus=0x0%x,pci_id=0x%x,", pdev->bus->number, pdev->devfn); - printk("rev_id=%d) IRQ%d\n", pdev->revision, card->hw.irq); - printk("cpc:found ramaddr=0x%08lx plxaddr=0x%08lx " - "ctladdr=0x%08lx falcaddr=0x%08lx\n", - card->hw.ramphys, card->hw.plxphys, card->hw.scaphys, - card->hw.falcphys); -#endif - /* Although we don't use this I/O region, we should - * request it from the kernel anyway, to avoid problems - * with other drivers accessing it. */ - if (!request_region(card->hw.iophys, card->hw.iosize, "PLX Registers")) { - /* In case we can't allocate it, warn user */ - printk("WARNING: couldn't allocate I/O region for PC300 board " - "at 0x%08x!\n", card->hw.ramphys); - } - - if (card->hw.plxphys) { - pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, card->hw.plxphys); - } else { - eeprom_outdated = 1; - card->hw.plxphys = pci_resource_start(pdev, 0); - card->hw.plxsize = pci_resource_len(pdev, 0); - } - - if (!request_mem_region(card->hw.plxphys, card->hw.plxsize, - "PLX Registers")) { - printk("PC300 found at RAM 0x%08x, " - "but could not allocate PLX mem region.\n", - card->hw.ramphys); - goto err_release_io; - } - if (!request_mem_region(card->hw.ramphys, card->hw.alloc_ramsize, - "On-board RAM")) { - printk("PC300 found at RAM 0x%08x, " - "but could not allocate RAM mem region.\n", - card->hw.ramphys); - goto err_release_plx; - } - if (!request_mem_region(card->hw.scaphys, card->hw.scasize, - "SCA-II Registers")) { - printk("PC300 found at RAM 0x%08x, " - "but could not allocate SCA mem region.\n", - card->hw.ramphys); - goto err_release_ram; - } - - card->hw.plxbase = ioremap(card->hw.plxphys, card->hw.plxsize); - card->hw.rambase = ioremap(card->hw.ramphys, card->hw.alloc_ramsize); - card->hw.scabase = ioremap(card->hw.scaphys, card->hw.scasize); - switch (device_id) { - case PCI_DEVICE_ID_PC300_TE_1: - case PCI_DEVICE_ID_PC300_TE_2: - case PCI_DEVICE_ID_PC300_TE_M_1: - case PCI_DEVICE_ID_PC300_TE_M_2: - request_mem_region(card->hw.falcphys, card->hw.falcsize, - "FALC Registers"); - card->hw.falcbase = ioremap(card->hw.falcphys, card->hw.falcsize); - break; - - case PCI_DEVICE_ID_PC300_RX_1: - case PCI_DEVICE_ID_PC300_RX_2: - default: - card->hw.falcbase = NULL; - break; - } - -#ifdef PC300_DEBUG_PCI - printk("cpc: relocate ramaddr=0x%08lx plxaddr=0x%08lx " - "ctladdr=0x%08lx falcaddr=0x%08lx\n", - card->hw.rambase, card->hw.plxbase, card->hw.scabase, - card->hw.falcbase); -#endif - - /* Set PCI drv pointer to the card structure */ - pci_set_drvdata(pdev, card); - - /* Set board type */ - switch (device_id) { - case PCI_DEVICE_ID_PC300_TE_1: - case PCI_DEVICE_ID_PC300_TE_2: - case PCI_DEVICE_ID_PC300_TE_M_1: - case PCI_DEVICE_ID_PC300_TE_M_2: - card->hw.type = PC300_TE; - - if ((device_id == PCI_DEVICE_ID_PC300_TE_M_1) || - (device_id == PCI_DEVICE_ID_PC300_TE_M_2)) { - card->hw.bus = PC300_PMC; - /* Set PLX register offsets */ - card->hw.gpioc_reg = 0x54; - card->hw.intctl_reg = 0x4c; - } else { - card->hw.bus = PC300_PCI; - /* Set PLX register offsets */ - card->hw.gpioc_reg = 0x50; - card->hw.intctl_reg = 0x4c; - } - break; - - case PCI_DEVICE_ID_PC300_RX_1: - case PCI_DEVICE_ID_PC300_RX_2: - default: - card->hw.bus = PC300_PCI; - /* Set PLX register offsets */ - card->hw.gpioc_reg = 0x50; - card->hw.intctl_reg = 0x4c; - - if ((cpc_readl(card->hw.plxbase + card->hw.gpioc_reg) & PC300_CTYPE_MASK)) { - card->hw.type = PC300_X21; - } else { - card->hw.type = PC300_RSV; - } - break; - } - - /* Allocate IRQ */ - if (request_irq(card->hw.irq, cpc_intr, IRQF_SHARED, "Cyclades-PC300", card)) { - printk ("PC300 found at RAM 0x%08x, but could not allocate IRQ%d.\n", - card->hw.ramphys, card->hw.irq); - goto err_io_unmap; - } - - cpc_init_card(card); - - if (eeprom_outdated) - printk("WARNING: PC300 with outdated EEPROM.\n"); - return 0; - -err_io_unmap: - iounmap(card->hw.plxbase); - iounmap(card->hw.scabase); - iounmap(card->hw.rambase); - if (card->hw.type == PC300_TE) { - iounmap(card->hw.falcbase); - release_mem_region(card->hw.falcphys, card->hw.falcsize); - } - release_mem_region(card->hw.scaphys, card->hw.scasize); -err_release_ram: - release_mem_region(card->hw.ramphys, card->hw.alloc_ramsize); -err_release_plx: - release_mem_region(card->hw.plxphys, card->hw.plxsize); -err_release_io: - release_region(card->hw.iophys, card->hw.iosize); - kfree(card); -err_disable_dev: - pci_disable_device(pdev); - return err; -} - -static void __devexit cpc_remove_one(struct pci_dev *pdev) -{ - pc300_t *card = pci_get_drvdata(pdev); - - if (card->hw.rambase) { - int i; - - /* Disable interrupts on the PCI bridge */ - cpc_writew(card->hw.plxbase + card->hw.intctl_reg, - cpc_readw(card->hw.plxbase + card->hw.intctl_reg) & ~(0x0040)); - - for (i = 0; i < card->hw.nchan; i++) { - unregister_hdlc_device(card->chan[i].d.dev); - } - iounmap(card->hw.plxbase); - iounmap(card->hw.scabase); - iounmap(card->hw.rambase); - release_mem_region(card->hw.plxphys, card->hw.plxsize); - release_mem_region(card->hw.ramphys, card->hw.alloc_ramsize); - release_mem_region(card->hw.scaphys, card->hw.scasize); - release_region(card->hw.iophys, card->hw.iosize); - if (card->hw.type == PC300_TE) { - iounmap(card->hw.falcbase); - release_mem_region(card->hw.falcphys, card->hw.falcsize); - } - for (i = 0; i < card->hw.nchan; i++) - if (card->chan[i].d.dev) - free_netdev(card->chan[i].d.dev); - if (card->hw.irq) - free_irq(card->hw.irq, card); - kfree(card); - pci_disable_device(pdev); - } -} - -static struct pci_driver cpc_driver = { - .name = "pc300", - .id_table = cpc_pci_dev_id, - .probe = cpc_init_one, - .remove = __devexit_p(cpc_remove_one), -}; - -static int __init cpc_init(void) -{ - show_version(); - return pci_register_driver(&cpc_driver); -} - -static void __exit cpc_cleanup_module(void) -{ - pci_unregister_driver(&cpc_driver); -} - -module_init(cpc_init); -module_exit(cpc_cleanup_module); - -MODULE_DESCRIPTION("Cyclades-PC300 cards driver"); -MODULE_AUTHOR( "Author: Ivan Passos <ivan@cyclades.com>\r\n" - "Maintainer: PC300 Maintainer <pc300@cyclades.com"); -MODULE_LICENSE("GPL"); - diff --git a/drivers/net/wan/pc300_tty.c b/drivers/net/wan/pc300_tty.c deleted file mode 100644 index 4709f4228561..000000000000 --- a/drivers/net/wan/pc300_tty.c +++ /dev/null @@ -1,1079 +0,0 @@ -/* - * pc300_tty.c Cyclades-PC300(tm) TTY Driver. - * - * Author: Regina Kodato <reginak@cyclades.com> - * - * Copyright: (c) 1999-2002 Cyclades Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * $Log: pc300_tty.c,v $ - * Revision 3.7 2002/03/07 14:17:09 henrique - * License data fixed - * - * Revision 3.6 2001/12/10 12:29:42 regina - * Fix the MLPPP bug - * - * Revision 3.5 2001/10/31 11:20:05 regina - * automatic pppd starts - * - * Revision 3.4 2001/08/06 12:01:51 regina - * problem in DSR_DE bit - * - * Revision 3.3 2001/07/26 22:58:41 regina - * update EDA value - * - * Revision 3.2 2001/07/12 13:11:20 regina - * bug fix - DCD-OFF in pc300 tty driver - * - * DMA transmission bug fix - * - * Revision 3.1 2001/06/22 13:13:02 regina - * MLPPP implementation - * - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/netdevice.h> -#include <linux/spinlock.h> -#include <linux/slab.h> -#include <linux/if.h> -#include <linux/skbuff.h> -/* TTY includes */ -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial.h> - -#include <asm/io.h> -#include <asm/uaccess.h> - -#include "pc300.h" - -/* defines and macros */ -/* TTY Global definitions */ -#define CPC_TTY_NPORTS 8 /* maximum number of the sync tty connections */ -#define CPC_TTY_MAJOR CYCLADES_MAJOR -#define CPC_TTY_MINOR_START 240 /* minor of the first PC300 interface */ - -#define CPC_TTY_MAX_MTU 2000 - -/* tty interface state */ -#define CPC_TTY_ST_IDLE 0 -#define CPC_TTY_ST_INIT 1 /* configured with MLPPP and up */ -#define CPC_TTY_ST_OPEN 2 /* opened by application */ - -#define CPC_TTY_LOCK(card,flags)\ - do {\ - spin_lock_irqsave(&card->card_lock, flags); \ - } while (0) - -#define CPC_TTY_UNLOCK(card,flags) \ - do {\ - spin_unlock_irqrestore(&card->card_lock, flags); \ - } while (0) - -//#define CPC_TTY_DBG(format,a...) printk(format,##a) -#define CPC_TTY_DBG(format,a...) - -/* data structures */ -typedef struct _st_cpc_rx_buf { - struct _st_cpc_rx_buf *next; - int size; - unsigned char data[1]; -} st_cpc_rx_buf; - -struct st_cpc_rx_list { - st_cpc_rx_buf *first; - st_cpc_rx_buf *last; -}; - -typedef struct _st_cpc_tty_area { - int state; /* state of the TTY interface */ - int num_open; - unsigned int tty_minor; /* minor this interface */ - volatile struct st_cpc_rx_list buf_rx; /* ptr. to reception buffer */ - unsigned char* buf_tx; /* ptr. to transmission buffer */ - pc300dev_t* pc300dev; /* ptr. to info struct in PC300 driver */ - unsigned char name[20]; /* interf. name + "-tty" */ - struct tty_struct *tty; - struct work_struct tty_tx_work; /* tx work - tx interrupt */ - struct work_struct tty_rx_work; /* rx work - rx interrupt */ - } st_cpc_tty_area; - -/* TTY data structures */ -static struct tty_driver serial_drv; - -/* local variables */ -static st_cpc_tty_area cpc_tty_area[CPC_TTY_NPORTS]; - -static int cpc_tty_cnt = 0; /* number of intrfaces configured with MLPPP */ -static int cpc_tty_unreg_flag = 0; - -/* TTY functions prototype */ -static int cpc_tty_open(struct tty_struct *tty, struct file *flip); -static void cpc_tty_close(struct tty_struct *tty, struct file *flip); -static int cpc_tty_write(struct tty_struct *tty, const unsigned char *buf, int count); -static int cpc_tty_write_room(struct tty_struct *tty); -static int cpc_tty_chars_in_buffer(struct tty_struct *tty); -static void cpc_tty_flush_buffer(struct tty_struct *tty); -static void cpc_tty_hangup(struct tty_struct *tty); -static void cpc_tty_rx_work(struct work_struct *work); -static void cpc_tty_tx_work(struct work_struct *work); -static int cpc_tty_send_to_card(pc300dev_t *dev,void *buf, int len); -static void cpc_tty_trace(pc300dev_t *dev, char* buf, int len, char rxtx); -static void cpc_tty_signal_off(pc300dev_t *pc300dev, unsigned char); -static void cpc_tty_signal_on(pc300dev_t *pc300dev, unsigned char); - -static int pc300_tiocmset(struct tty_struct *, unsigned int, unsigned int); -static int pc300_tiocmget(struct tty_struct *); - -/* functions called by PC300 driver */ -void cpc_tty_init(pc300dev_t *dev); -void cpc_tty_unregister_service(pc300dev_t *pc300dev); -void cpc_tty_receive(pc300dev_t *pc300dev); -void cpc_tty_trigger_poll(pc300dev_t *pc300dev); - -/* - * PC300 TTY clear "signal" - */ -static void cpc_tty_signal_off(pc300dev_t *pc300dev, unsigned char signal) -{ - pc300ch_t *pc300chan = (pc300ch_t *)pc300dev->chan; - pc300_t *card = (pc300_t *) pc300chan->card; - int ch = pc300chan->channel; - unsigned long flags; - - CPC_TTY_DBG("%s-tty: Clear signal %x\n", - pc300dev->dev->name, signal); - CPC_TTY_LOCK(card, flags); - cpc_writeb(card->hw.scabase + M_REG(CTL,ch), - cpc_readb(card->hw.scabase+M_REG(CTL,ch))& signal); - CPC_TTY_UNLOCK(card,flags); -} - -/* - * PC300 TTY set "signal" to ON - */ -static void cpc_tty_signal_on(pc300dev_t *pc300dev, unsigned char signal) -{ - pc300ch_t *pc300chan = (pc300ch_t *)pc300dev->chan; - pc300_t *card = (pc300_t *) pc300chan->card; - int ch = pc300chan->channel; - unsigned long flags; - - CPC_TTY_DBG("%s-tty: Set signal %x\n", - pc300dev->dev->name, signal); - CPC_TTY_LOCK(card, flags); - cpc_writeb(card->hw.scabase + M_REG(CTL,ch), - cpc_readb(card->hw.scabase+M_REG(CTL,ch))& ~signal); - CPC_TTY_UNLOCK(card,flags); -} - - -static const struct tty_operations pc300_ops = { - .open = cpc_tty_open, - .close = cpc_tty_close, - .write = cpc_tty_write, - .write_room = cpc_tty_write_room, - .chars_in_buffer = cpc_tty_chars_in_buffer, - .tiocmset = pc300_tiocmset, - .tiocmget = pc300_tiocmget, - .flush_buffer = cpc_tty_flush_buffer, - .hangup = cpc_tty_hangup, -}; - - -/* - * PC300 TTY initialization routine - * - * This routine is called by the PC300 driver during board configuration - * (ioctl=SIOCSP300CONF). At this point the adapter is completely - * initialized. - * o verify kernel version (only 2.4.x) - * o register TTY driver - * o init cpc_tty_area struct - */ -void cpc_tty_init(pc300dev_t *pc300dev) -{ - unsigned long port; - int aux; - st_cpc_tty_area * cpc_tty; - - /* hdlcX - X=interface number */ - port = pc300dev->dev->name[4] - '0'; - if (port >= CPC_TTY_NPORTS) { - printk("%s-tty: invalid interface selected (0-%i): %li", - pc300dev->dev->name, - CPC_TTY_NPORTS-1,port); - return; - } - - if (cpc_tty_cnt == 0) { /* first TTY connection -> register driver */ - CPC_TTY_DBG("%s-tty: driver init, major:%i, minor range:%i=%i\n", - pc300dev->dev->name, - CPC_TTY_MAJOR, CPC_TTY_MINOR_START, - CPC_TTY_MINOR_START+CPC_TTY_NPORTS); - /* initialize tty driver struct */ - memset(&serial_drv,0,sizeof(struct tty_driver)); - serial_drv.magic = TTY_DRIVER_MAGIC; - serial_drv.owner = THIS_MODULE; - serial_drv.driver_name = "pc300_tty"; - serial_drv.name = "ttyCP"; - serial_drv.major = CPC_TTY_MAJOR; - serial_drv.minor_start = CPC_TTY_MINOR_START; - serial_drv.num = CPC_TTY_NPORTS; - serial_drv.type = TTY_DRIVER_TYPE_SERIAL; - serial_drv.subtype = SERIAL_TYPE_NORMAL; - - serial_drv.init_termios = tty_std_termios; - serial_drv.init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; - serial_drv.flags = TTY_DRIVER_REAL_RAW; - - /* interface routines from the upper tty layer to the tty driver */ - tty_set_operations(&serial_drv, &pc300_ops); - - /* register the TTY driver */ - if (tty_register_driver(&serial_drv)) { - printk("%s-tty: Failed to register serial driver! ", - pc300dev->dev->name); - return; - } - - memset((void *)cpc_tty_area, 0, - sizeof(st_cpc_tty_area) * CPC_TTY_NPORTS); - } - - cpc_tty = &cpc_tty_area[port]; - - if (cpc_tty->state != CPC_TTY_ST_IDLE) { - CPC_TTY_DBG("%s-tty: TTY port %i, already in use.\n", - pc300dev->dev->name, port); - return; - } - - cpc_tty_cnt++; - cpc_tty->state = CPC_TTY_ST_INIT; - cpc_tty->num_open= 0; - cpc_tty->tty_minor = port + CPC_TTY_MINOR_START; - cpc_tty->pc300dev = pc300dev; - - INIT_WORK(&cpc_tty->tty_tx_work, cpc_tty_tx_work); - INIT_WORK(&cpc_tty->tty_rx_work, cpc_tty_rx_work); - - cpc_tty->buf_rx.first = cpc_tty->buf_rx.last = NULL; - - pc300dev->cpc_tty = (void *)cpc_tty; - - aux = strlen(pc300dev->dev->name); - memcpy(cpc_tty->name, pc300dev->dev->name, aux); - memcpy(&cpc_tty->name[aux], "-tty", 5); - - cpc_open(pc300dev->dev); - cpc_tty_signal_off(pc300dev, CTL_DTR); - - CPC_TTY_DBG("%s: Initializing TTY Sync Driver, tty major#%d minor#%i\n", - cpc_tty->name,CPC_TTY_MAJOR,cpc_tty->tty_minor); - return; -} - -/* - * PC300 TTY OPEN routine - * - * This routine is called by the tty driver to open the interface - * o verify minor - * o allocate buffer to Rx and Tx - */ -static int cpc_tty_open(struct tty_struct *tty, struct file *flip) -{ - int port ; - st_cpc_tty_area *cpc_tty; - - if (!tty) { - return -ENODEV; - } - - port = tty->index; - - if ((port < 0) || (port >= CPC_TTY_NPORTS)){ - CPC_TTY_DBG("pc300_tty: open invalid port %d\n", port); - return -ENODEV; - } - - cpc_tty = &cpc_tty_area[port]; - - if (cpc_tty->state == CPC_TTY_ST_IDLE){ - CPC_TTY_DBG("%s: open - invalid interface, port=%d\n", - cpc_tty->name, tty->index); - return -ENODEV; - } - - if (cpc_tty->num_open == 0) { /* first open of this tty */ - if (!cpc_tty_area[port].buf_tx){ - cpc_tty_area[port].buf_tx = kmalloc(CPC_TTY_MAX_MTU,GFP_KERNEL); - if (!cpc_tty_area[port].buf_tx) { - CPC_TTY_DBG("%s: error in memory allocation\n",cpc_tty->name); - return -ENOMEM; - } - } - - if (cpc_tty_area[port].buf_rx.first) { - unsigned char * aux; - while (cpc_tty_area[port].buf_rx.first) { - aux = (unsigned char *)cpc_tty_area[port].buf_rx.first; - cpc_tty_area[port].buf_rx.first = cpc_tty_area[port].buf_rx.first->next; - kfree(aux); - } - cpc_tty_area[port].buf_rx.first = NULL; - cpc_tty_area[port].buf_rx.last = NULL; - } - - cpc_tty_area[port].state = CPC_TTY_ST_OPEN; - cpc_tty_area[port].tty = tty; - tty->driver_data = &cpc_tty_area[port]; - - cpc_tty_signal_on(cpc_tty->pc300dev, CTL_DTR); - } - - cpc_tty->num_open++; - - CPC_TTY_DBG("%s: opening TTY driver\n", cpc_tty->name); - - /* avisar driver PC300 */ - return 0; -} - -/* - * PC300 TTY CLOSE routine - * - * This routine is called by the tty driver to close the interface - * o call close channel in PC300 driver (cpc_closech) - * o free Rx and Tx buffers - */ - -static void cpc_tty_close(struct tty_struct *tty, struct file *flip) -{ - st_cpc_tty_area *cpc_tty; - unsigned long flags; - int res; - - if (!tty || !tty->driver_data ) { - CPC_TTY_DBG("hdlx-tty: no TTY in close\n"); - return; - } - - cpc_tty = (st_cpc_tty_area *) tty->driver_data; - - if ((cpc_tty->tty != tty)|| (cpc_tty->state != CPC_TTY_ST_OPEN)) { - CPC_TTY_DBG("%s: TTY is not opened\n",cpc_tty->name); - return; - } - - if (!cpc_tty->num_open) { - CPC_TTY_DBG("%s: TTY is closed\n",cpc_tty->name); - return; - } - - if (--cpc_tty->num_open > 0) { - CPC_TTY_DBG("%s: TTY closed\n",cpc_tty->name); - return; - } - - cpc_tty_signal_off(cpc_tty->pc300dev, CTL_DTR); - - CPC_TTY_LOCK(cpc_tty->pc300dev->chan->card, flags); /* lock irq */ - cpc_tty->tty = NULL; - cpc_tty->state = CPC_TTY_ST_INIT; - CPC_TTY_UNLOCK(cpc_tty->pc300dev->chan->card, flags); /* unlock irq */ - - if (cpc_tty->buf_rx.first) { - unsigned char * aux; - while (cpc_tty->buf_rx.first) { - aux = (unsigned char *)cpc_tty->buf_rx.first; - cpc_tty->buf_rx.first = cpc_tty->buf_rx.first->next; - kfree(aux); - } - cpc_tty->buf_rx.first = NULL; - cpc_tty->buf_rx.last = NULL; - } - - kfree(cpc_tty->buf_tx); - cpc_tty->buf_tx = NULL; - - CPC_TTY_DBG("%s: TTY closed\n",cpc_tty->name); - - if (!serial_drv.refcount && cpc_tty_unreg_flag) { - cpc_tty_unreg_flag = 0; - CPC_TTY_DBG("%s: unregister the tty driver\n", cpc_tty->name); - if ((res=tty_unregister_driver(&serial_drv))) { - CPC_TTY_DBG("%s: ERROR ->unregister the tty driver error=%d\n", - cpc_tty->name,res); - } - } - return; -} - -/* - * PC300 TTY WRITE routine - * - * This routine is called by the tty driver to write a series of characters - * to the tty device. The characters may come from user or kernel space. - * o verify the DCD signal - * o send characters to board and start the transmission - */ -static int cpc_tty_write(struct tty_struct *tty, const unsigned char *buf, int count) -{ - st_cpc_tty_area *cpc_tty; - pc300ch_t *pc300chan; - pc300_t *card; - int ch; - unsigned long flags; - struct net_device_stats *stats; - - if (!tty || !tty->driver_data ) { - CPC_TTY_DBG("hdlcX-tty: no TTY in write\n"); - return -ENODEV; - } - - cpc_tty = (st_cpc_tty_area *) tty->driver_data; - - if ((cpc_tty->tty != tty) || (cpc_tty->state != CPC_TTY_ST_OPEN)) { - CPC_TTY_DBG("%s: TTY is not opened\n", cpc_tty->name); - return -ENODEV; - } - - if (count > CPC_TTY_MAX_MTU) { - CPC_TTY_DBG("%s: count is invalid\n",cpc_tty->name); - return -EINVAL; /* frame too big */ - } - - CPC_TTY_DBG("%s: cpc_tty_write data len=%i\n",cpc_tty->name,count); - - pc300chan = (pc300ch_t *)((pc300dev_t*)cpc_tty->pc300dev)->chan; - stats = &cpc_tty->pc300dev->dev->stats; - card = (pc300_t *) pc300chan->card; - ch = pc300chan->channel; - - /* verify DCD signal*/ - if (cpc_readb(card->hw.scabase + M_REG(ST3,ch)) & ST3_DCD) { - /* DCD is OFF */ - CPC_TTY_DBG("%s : DCD is OFF\n", cpc_tty->name); - stats->tx_errors++; - stats->tx_carrier_errors++; - CPC_TTY_LOCK(card, flags); - cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_TX_BUF_CLR); - - if (card->hw.type == PC300_TE) { - cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, - cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) & - ~(CPLD_REG2_FALC_LED1 << (2 *ch))); - } - - CPC_TTY_UNLOCK(card, flags); - - return -EINVAL; - } - - if (cpc_tty_send_to_card(cpc_tty->pc300dev, (void*)buf, count)) { - /* failed to send */ - CPC_TTY_DBG("%s: trasmition error\n", cpc_tty->name); - return 0; - } - return count; -} - -/* - * PC300 TTY Write Room routine - * - * This routine returns the numbers of characteres the tty driver will accept - * for queuing to be written. - * o return MTU - */ -static int cpc_tty_write_room(struct tty_struct *tty) -{ - st_cpc_tty_area *cpc_tty; - - if (!tty || !tty->driver_data ) { - CPC_TTY_DBG("hdlcX-tty: no TTY to write room\n"); - return -ENODEV; - } - - cpc_tty = (st_cpc_tty_area *) tty->driver_data; - - if ((cpc_tty->tty != tty) || (cpc_tty->state != CPC_TTY_ST_OPEN)) { - CPC_TTY_DBG("%s: TTY is not opened\n",cpc_tty->name); - return -ENODEV; - } - - CPC_TTY_DBG("%s: write room\n",cpc_tty->name); - - return CPC_TTY_MAX_MTU; -} - -/* - * PC300 TTY chars in buffer routine - * - * This routine returns the chars number in the transmission buffer - * o returns 0 - */ -static int cpc_tty_chars_in_buffer(struct tty_struct *tty) -{ - st_cpc_tty_area *cpc_tty; - - if (!tty || !tty->driver_data ) { - CPC_TTY_DBG("hdlcX-tty: no TTY to chars in buffer\n"); - return -ENODEV; - } - - cpc_tty = (st_cpc_tty_area *) tty->driver_data; - - if ((cpc_tty->tty != tty) || (cpc_tty->state != CPC_TTY_ST_OPEN)) { - CPC_TTY_DBG("%s: TTY is not opened\n",cpc_tty->name); - return -ENODEV; - } - - return 0; -} - -static int pc300_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - st_cpc_tty_area *cpc_tty; - - CPC_TTY_DBG("%s: set:%x clear:%x\n", __func__, set, clear); - - if (!tty || !tty->driver_data ) { - CPC_TTY_DBG("hdlcX-tty: no TTY to chars in buffer\n"); - return -ENODEV; - } - - cpc_tty = (st_cpc_tty_area *) tty->driver_data; - - if (set & TIOCM_RTS) - cpc_tty_signal_on(cpc_tty->pc300dev, CTL_RTS); - if (set & TIOCM_DTR) - cpc_tty_signal_on(cpc_tty->pc300dev, CTL_DTR); - - if (clear & TIOCM_RTS) - cpc_tty_signal_off(cpc_tty->pc300dev, CTL_RTS); - if (clear & TIOCM_DTR) - cpc_tty_signal_off(cpc_tty->pc300dev, CTL_DTR); - - return 0; -} - -static int pc300_tiocmget(struct tty_struct *tty) -{ - unsigned int result; - unsigned char status; - unsigned long flags; - st_cpc_tty_area *cpc_tty = (st_cpc_tty_area *) tty->driver_data; - pc300dev_t *pc300dev = cpc_tty->pc300dev; - pc300ch_t *pc300chan = (pc300ch_t *)pc300dev->chan; - pc300_t *card = (pc300_t *) pc300chan->card; - int ch = pc300chan->channel; - - cpc_tty = (st_cpc_tty_area *) tty->driver_data; - - CPC_TTY_DBG("%s-tty: tiocmget\n", - ((struct net_device*)(pc300dev->hdlc))->name); - - CPC_TTY_LOCK(card, flags); - status = cpc_readb(card->hw.scabase+M_REG(CTL,ch)); - CPC_TTY_UNLOCK(card,flags); - - result = ((status & CTL_DTR) ? TIOCM_DTR : 0) | - ((status & CTL_RTS) ? TIOCM_RTS : 0); - - return result; -} - -/* - * PC300 TTY Flush Buffer routine - * - * This routine resets the transmission buffer - */ -static void cpc_tty_flush_buffer(struct tty_struct *tty) -{ - st_cpc_tty_area *cpc_tty; - - if (!tty || !tty->driver_data ) { - CPC_TTY_DBG("hdlcX-tty: no TTY to flush buffer\n"); - return; - } - - cpc_tty = (st_cpc_tty_area *) tty->driver_data; - - if ((cpc_tty->tty != tty) || (cpc_tty->state != CPC_TTY_ST_OPEN)) { - CPC_TTY_DBG("%s: TTY is not opened\n",cpc_tty->name); - return; - } - - CPC_TTY_DBG("%s: call wake_up_interruptible\n",cpc_tty->name); - - tty_wakeup(tty); - return; -} - -/* - * PC300 TTY Hangup routine - * - * This routine is called by the tty driver to hangup the interface - * o clear DTR signal - */ - -static void cpc_tty_hangup(struct tty_struct *tty) -{ - st_cpc_tty_area *cpc_tty; - int res; - - if (!tty || !tty->driver_data ) { - CPC_TTY_DBG("hdlcX-tty: no TTY to hangup\n"); - return ; - } - - cpc_tty = (st_cpc_tty_area *) tty->driver_data; - - if ((cpc_tty->tty != tty) || (cpc_tty->state != CPC_TTY_ST_OPEN)) { - CPC_TTY_DBG("%s: TTY is not opened\n",cpc_tty->name); - return ; - } - if (!serial_drv.refcount && cpc_tty_unreg_flag) { - cpc_tty_unreg_flag = 0; - CPC_TTY_DBG("%s: unregister the tty driver\n", cpc_tty->name); - if ((res=tty_unregister_driver(&serial_drv))) { - CPC_TTY_DBG("%s: ERROR ->unregister the tty driver error=%d\n", - cpc_tty->name,res); - } - } - cpc_tty_signal_off(cpc_tty->pc300dev, CTL_DTR); -} - -/* - * PC300 TTY RX work routine - * This routine treats RX work - * o verify read buffer - * o call the line disc. read - * o free memory - */ -static void cpc_tty_rx_work(struct work_struct *work) -{ - st_cpc_tty_area *cpc_tty; - unsigned long port; - int i, j; - volatile st_cpc_rx_buf *buf; - char flags=0,flg_rx=1; - struct tty_ldisc *ld; - - if (cpc_tty_cnt == 0) return; - - for (i=0; (i < 4) && flg_rx ; i++) { - flg_rx = 0; - - cpc_tty = container_of(work, st_cpc_tty_area, tty_rx_work); - port = cpc_tty - cpc_tty_area; - - for (j=0; j < CPC_TTY_NPORTS; j++) { - cpc_tty = &cpc_tty_area[port]; - - if ((buf=cpc_tty->buf_rx.first) != NULL) { - if (cpc_tty->tty) { - ld = tty_ldisc_ref(cpc_tty->tty); - if (ld) { - if (ld->ops->receive_buf) { - CPC_TTY_DBG("%s: call line disc. receive_buf\n",cpc_tty->name); - ld->ops->receive_buf(cpc_tty->tty, (char *)(buf->data), &flags, buf->size); - } - tty_ldisc_deref(ld); - } - } - cpc_tty->buf_rx.first = cpc_tty->buf_rx.first->next; - kfree((void *)buf); - buf = cpc_tty->buf_rx.first; - flg_rx = 1; - } - if (++port == CPC_TTY_NPORTS) port = 0; - } - } -} - -/* - * PC300 TTY RX work routine - * - * This routine treats RX interrupt. - * o read all frames in card - * o verify the frame size - * o read the frame in rx buffer - */ -static void cpc_tty_rx_disc_frame(pc300ch_t *pc300chan) -{ - volatile pcsca_bd_t __iomem * ptdescr; - volatile unsigned char status; - pc300_t *card = (pc300_t *)pc300chan->card; - int ch = pc300chan->channel; - - /* dma buf read */ - ptdescr = (pcsca_bd_t __iomem *)(card->hw.rambase + - RX_BD_ADDR(ch, pc300chan->rx_first_bd)); - while (pc300chan->rx_first_bd != pc300chan->rx_last_bd) { - status = cpc_readb(&ptdescr->status); - cpc_writeb(&ptdescr->status, 0); - cpc_writeb(&ptdescr->len, 0); - pc300chan->rx_first_bd = (pc300chan->rx_first_bd + 1) & - (N_DMA_RX_BUF - 1); - if (status & DST_EOM) { - break; /* end of message */ - } - ptdescr = (pcsca_bd_t __iomem *)(card->hw.rambase + cpc_readl(&ptdescr->next)); - } -} - -void cpc_tty_receive(pc300dev_t *pc300dev) -{ - st_cpc_tty_area *cpc_tty; - pc300ch_t *pc300chan = (pc300ch_t *)pc300dev->chan; - pc300_t *card = (pc300_t *)pc300chan->card; - int ch = pc300chan->channel; - volatile pcsca_bd_t __iomem * ptdescr; - struct net_device_stats *stats = &pc300dev->dev->stats; - int rx_len, rx_aux; - volatile unsigned char status; - unsigned short first_bd = pc300chan->rx_first_bd; - st_cpc_rx_buf *new = NULL; - unsigned char dsr_rx; - - if (pc300dev->cpc_tty == NULL) { - return; - } - - dsr_rx = cpc_readb(card->hw.scabase + DSR_RX(ch)); - - cpc_tty = pc300dev->cpc_tty; - - while (1) { - rx_len = 0; - ptdescr = (pcsca_bd_t __iomem *)(card->hw.rambase + RX_BD_ADDR(ch, first_bd)); - while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) { - rx_len += cpc_readw(&ptdescr->len); - first_bd = (first_bd + 1) & (N_DMA_RX_BUF - 1); - if (status & DST_EOM) { - break; - } - ptdescr = (pcsca_bd_t __iomem *)(card->hw.rambase+cpc_readl(&ptdescr->next)); - } - - if (!rx_len) { - if (dsr_rx & DSR_BOF) { - /* update EDA */ - cpc_writel(card->hw.scabase + DRX_REG(EDAL, ch), - RX_BD_ADDR(ch, pc300chan->rx_last_bd)); - } - kfree(new); - return; - } - - if (rx_len > CPC_TTY_MAX_MTU) { - /* Free RX descriptors */ - CPC_TTY_DBG("%s: frame size is invalid.\n",cpc_tty->name); - stats->rx_errors++; - stats->rx_frame_errors++; - cpc_tty_rx_disc_frame(pc300chan); - continue; - } - - new = kmalloc(rx_len + sizeof(st_cpc_rx_buf), GFP_ATOMIC); - if (!new) { - cpc_tty_rx_disc_frame(pc300chan); - continue; - } - - /* dma buf read */ - ptdescr = (pcsca_bd_t __iomem *)(card->hw.rambase + - RX_BD_ADDR(ch, pc300chan->rx_first_bd)); - - rx_len = 0; /* counter frame size */ - - while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) { - rx_aux = cpc_readw(&ptdescr->len); - if ((status & (DST_OVR | DST_CRC | DST_RBIT | DST_SHRT | DST_ABT)) - || (rx_aux > BD_DEF_LEN)) { - CPC_TTY_DBG("%s: reception error\n", cpc_tty->name); - stats->rx_errors++; - if (status & DST_OVR) { - stats->rx_fifo_errors++; - } - if (status & DST_CRC) { - stats->rx_crc_errors++; - } - if ((status & (DST_RBIT | DST_SHRT | DST_ABT)) || - (rx_aux > BD_DEF_LEN)) { - stats->rx_frame_errors++; - } - /* discard remainig descriptors used by the bad frame */ - CPC_TTY_DBG("%s: reception error - discard descriptors", - cpc_tty->name); - cpc_tty_rx_disc_frame(pc300chan); - rx_len = 0; - kfree(new); - new = NULL; - break; /* read next frame - while(1) */ - } - - if (cpc_tty->state != CPC_TTY_ST_OPEN) { - /* Free RX descriptors */ - cpc_tty_rx_disc_frame(pc300chan); - stats->rx_dropped++; - rx_len = 0; - kfree(new); - new = NULL; - break; /* read next frame - while(1) */ - } - - /* read the segment of the frame */ - if (rx_aux != 0) { - memcpy_fromio((new->data + rx_len), - (void __iomem *)(card->hw.rambase + - cpc_readl(&ptdescr->ptbuf)), rx_aux); - rx_len += rx_aux; - } - cpc_writeb(&ptdescr->status,0); - cpc_writeb(&ptdescr->len, 0); - pc300chan->rx_first_bd = (pc300chan->rx_first_bd + 1) & - (N_DMA_RX_BUF -1); - if (status & DST_EOM)break; - - ptdescr = (pcsca_bd_t __iomem *) (card->hw.rambase + - cpc_readl(&ptdescr->next)); - } - /* update pointer */ - pc300chan->rx_last_bd = (pc300chan->rx_first_bd - 1) & - (N_DMA_RX_BUF - 1) ; - if (!(dsr_rx & DSR_BOF)) { - /* update EDA */ - cpc_writel(card->hw.scabase + DRX_REG(EDAL, ch), - RX_BD_ADDR(ch, pc300chan->rx_last_bd)); - } - if (rx_len != 0) { - stats->rx_bytes += rx_len; - - if (pc300dev->trace_on) { - cpc_tty_trace(pc300dev, new->data,rx_len, 'R'); - } - new->size = rx_len; - new->next = NULL; - if (cpc_tty->buf_rx.first == NULL) { - cpc_tty->buf_rx.first = new; - cpc_tty->buf_rx.last = new; - } else { - cpc_tty->buf_rx.last->next = new; - cpc_tty->buf_rx.last = new; - } - schedule_work(&(cpc_tty->tty_rx_work)); - stats->rx_packets++; - } - } -} - -/* - * PC300 TTY TX work routine - * - * This routine treats TX interrupt. - * o if need call line discipline wakeup - * o call wake_up_interruptible - */ -static void cpc_tty_tx_work(struct work_struct *work) -{ - st_cpc_tty_area *cpc_tty = - container_of(work, st_cpc_tty_area, tty_tx_work); - struct tty_struct *tty; - - CPC_TTY_DBG("%s: cpc_tty_tx_work init\n",cpc_tty->name); - - if ((tty = cpc_tty->tty) == NULL) { - CPC_TTY_DBG("%s: the interface is not opened\n",cpc_tty->name); - return; - } - tty_wakeup(tty); -} - -/* - * PC300 TTY send to card routine - * - * This routine send data to card. - * o clear descriptors - * o write data to DMA buffers - * o start the transmission - */ -static int cpc_tty_send_to_card(pc300dev_t *dev,void* buf, int len) -{ - pc300ch_t *chan = (pc300ch_t *)dev->chan; - pc300_t *card = (pc300_t *)chan->card; - int ch = chan->channel; - struct net_device_stats *stats = &dev->dev->stats; - unsigned long flags; - volatile pcsca_bd_t __iomem *ptdescr; - int i, nchar; - int tosend = len; - int nbuf = ((len - 1)/BD_DEF_LEN) + 1; - unsigned char *pdata=buf; - - CPC_TTY_DBG("%s:cpc_tty_send_to_cars len=%i", - (st_cpc_tty_area *)dev->cpc_tty->name,len); - - if (nbuf >= card->chan[ch].nfree_tx_bd) { - return 1; - } - - /* write buffer to DMA buffers */ - CPC_TTY_DBG("%s: call dma_buf_write\n", - (st_cpc_tty_area *)dev->cpc_tty->name); - for (i = 0 ; i < nbuf ; i++) { - ptdescr = (pcsca_bd_t __iomem *)(card->hw.rambase + - TX_BD_ADDR(ch, card->chan[ch].tx_next_bd)); - nchar = (BD_DEF_LEN > tosend) ? tosend : BD_DEF_LEN; - if (cpc_readb(&ptdescr->status) & DST_OSB) { - memcpy_toio((void __iomem *)(card->hw.rambase + - cpc_readl(&ptdescr->ptbuf)), - &pdata[len - tosend], - nchar); - card->chan[ch].nfree_tx_bd--; - if ((i + 1) == nbuf) { - /* This must be the last BD to be used */ - cpc_writeb(&ptdescr->status, DST_EOM); - } else { - cpc_writeb(&ptdescr->status, 0); - } - cpc_writew(&ptdescr->len, nchar); - } else { - CPC_TTY_DBG("%s: error in dma_buf_write\n", - (st_cpc_tty_area *)dev->cpc_tty->name); - stats->tx_dropped++; - return 1; - } - tosend -= nchar; - card->chan[ch].tx_next_bd = - (card->chan[ch].tx_next_bd + 1) & (N_DMA_TX_BUF - 1); - } - - if (dev->trace_on) { - cpc_tty_trace(dev, buf, len,'T'); - } - - /* start transmission */ - CPC_TTY_DBG("%s: start transmission\n", - (st_cpc_tty_area *)dev->cpc_tty->name); - - CPC_TTY_LOCK(card, flags); - cpc_writeb(card->hw.scabase + DTX_REG(EDAL, ch), - TX_BD_ADDR(ch, chan->tx_next_bd)); - cpc_writeb(card->hw.scabase + M_REG(CMD, ch), CMD_TX_ENA); - cpc_writeb(card->hw.scabase + DSR_TX(ch), DSR_DE); - - if (card->hw.type == PC300_TE) { - cpc_writeb(card->hw.falcbase + card->hw.cpld_reg2, - cpc_readb(card->hw.falcbase + card->hw.cpld_reg2) | - (CPLD_REG2_FALC_LED1 << (2 * ch))); - } - CPC_TTY_UNLOCK(card, flags); - return 0; -} - -/* - * PC300 TTY trace routine - * - * This routine send trace of connection to application. - * o clear descriptors - * o write data to DMA buffers - * o start the transmission - */ - -static void cpc_tty_trace(pc300dev_t *dev, char* buf, int len, char rxtx) -{ - struct sk_buff *skb; - - if ((skb = dev_alloc_skb(10 + len)) == NULL) { - /* out of memory */ - CPC_TTY_DBG("%s: tty_trace - out of memory\n", dev->dev->name); - return; - } - - skb_put (skb, 10 + len); - skb->dev = dev->dev; - skb->protocol = htons(ETH_P_CUST); - skb_reset_mac_header(skb); - skb->pkt_type = PACKET_HOST; - skb->len = 10 + len; - - skb_copy_to_linear_data(skb, dev->dev->name, 5); - skb->data[5] = '['; - skb->data[6] = rxtx; - skb->data[7] = ']'; - skb->data[8] = ':'; - skb->data[9] = ' '; - skb_copy_to_linear_data_offset(skb, 10, buf, len); - netif_rx(skb); -} - -/* - * PC300 TTY unregister service routine - * - * This routine unregister one interface. - */ -void cpc_tty_unregister_service(pc300dev_t *pc300dev) -{ - st_cpc_tty_area *cpc_tty; - ulong flags; - int res; - - if ((cpc_tty= (st_cpc_tty_area *) pc300dev->cpc_tty) == NULL) { - CPC_TTY_DBG("%s: interface is not TTY\n", pc300dev->dev->name); - return; - } - CPC_TTY_DBG("%s: cpc_tty_unregister_service", cpc_tty->name); - - if (cpc_tty->pc300dev != pc300dev) { - CPC_TTY_DBG("%s: invalid tty ptr=%s\n", - pc300dev->dev->name, cpc_tty->name); - return; - } - - if (--cpc_tty_cnt == 0) { - if (serial_drv.refcount) { - CPC_TTY_DBG("%s: unregister is not possible, refcount=%d", - cpc_tty->name, serial_drv.refcount); - cpc_tty_cnt++; - cpc_tty_unreg_flag = 1; - return; - } else { - CPC_TTY_DBG("%s: unregister the tty driver\n", cpc_tty->name); - if ((res=tty_unregister_driver(&serial_drv))) { - CPC_TTY_DBG("%s: ERROR ->unregister the tty driver error=%d\n", - cpc_tty->name,res); - } - } - } - CPC_TTY_LOCK(pc300dev->chan->card,flags); - cpc_tty->tty = NULL; - CPC_TTY_UNLOCK(pc300dev->chan->card, flags); - cpc_tty->tty_minor = 0; - cpc_tty->state = CPC_TTY_ST_IDLE; -} - -/* - * PC300 TTY trigger poll routine - * This routine is called by pc300driver to treats Tx interrupt. - */ -void cpc_tty_trigger_poll(pc300dev_t *pc300dev) -{ - st_cpc_tty_area *cpc_tty = (st_cpc_tty_area *)pc300dev->cpc_tty; - if (!cpc_tty) { - return; - } - schedule_work(&(cpc_tty->tty_tx_work)); -} diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index 3df0146b797e..efc162e0b511 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -1955,7 +1955,7 @@ static int at76_hw_scan(struct ieee80211_hw *hw, ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan)); if (ret < 0) { - err("CMD_SCAN failed: %d", ret); + wiphy_err(priv->hw->wiphy, "CMD_SCAN failed: %d\n", ret); goto exit; } @@ -2486,6 +2486,7 @@ static struct usb_driver at76_driver = { .probe = at76_probe, .disconnect = at76_disconnect, .id_table = dev_table, + .disable_hub_initiated_lpm = 1, }; static int __init at76_mod_init(void) diff --git a/drivers/net/wireless/ath/ath6kl/usb.c b/drivers/net/wireless/ath/ath6kl/usb.c index ec7f1f5fd1ca..44a795f14da9 100644 --- a/drivers/net/wireless/ath/ath6kl/usb.c +++ b/drivers/net/wireless/ath/ath6kl/usb.c @@ -1182,6 +1182,7 @@ static struct usb_driver ath6kl_usb_driver = { .disconnect = ath6kl_usb_remove, .id_table = ath6kl_usb_ids, .supports_autosuspend = true, + .disable_hub_initiated_lpm = 1, }; static int ath6kl_usb_init(void) diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index f67cd952e741..aa327adcc3d8 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -1358,6 +1358,7 @@ static struct usb_driver ath9k_hif_usb_driver = { #endif .id_table = ath9k_hif_usb_ids, .soft_unbind = 1, + .disable_hub_initiated_lpm = 1, }; int ath9k_hif_usb_init(void) diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c index 89821e4835c7..888152ce3eca 100644 --- a/drivers/net/wireless/ath/carl9170/usb.c +++ b/drivers/net/wireless/ath/carl9170/usb.c @@ -1159,6 +1159,7 @@ static struct usb_driver carl9170_driver = { .resume = carl9170_usb_resume, .reset_resume = carl9170_usb_resume, #endif /* CONFIG_PM */ + .disable_hub_initiated_lpm = 1, }; module_usb_driver(carl9170_driver); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index 1d67ecf681b7..c5a34ffe6459 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -1596,7 +1596,8 @@ static struct usb_driver brcmf_usbdrvr = { .id_table = brcmf_usb_devid_table, .suspend = brcmf_usb_suspend, .resume = brcmf_usb_resume, - .supports_autosuspend = 1 + .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, }; void brcmf_usb_exit(void) diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c index 75403e6e3990..cd3b0d400618 100644 --- a/drivers/net/wireless/libertas/if_usb.c +++ b/drivers/net/wireless/libertas/if_usb.c @@ -1011,6 +1011,7 @@ static struct usb_driver if_usb_driver = { .suspend = if_usb_suspend, .resume = if_usb_resume, .reset_resume = if_usb_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(if_usb_driver); diff --git a/drivers/net/wireless/libertas_tf/if_usb.c b/drivers/net/wireless/libertas_tf/if_usb.c index 7ced130f4f9e..19a5a92dd779 100644 --- a/drivers/net/wireless/libertas_tf/if_usb.c +++ b/drivers/net/wireless/libertas_tf/if_usb.c @@ -920,6 +920,7 @@ static struct usb_driver if_usb_driver = { .id_table = if_usb_table, .suspend = if_usb_suspend, .resume = if_usb_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(if_usb_driver); diff --git a/drivers/net/wireless/orinoco/orinoco_usb.c b/drivers/net/wireless/orinoco/orinoco_usb.c index f634d4582bfe..7f53cea2f205 100644 --- a/drivers/net/wireless/orinoco/orinoco_usb.c +++ b/drivers/net/wireless/orinoco/orinoco_usb.c @@ -1752,6 +1752,7 @@ static struct usb_driver orinoco_driver = { .probe = ezusb_probe, .disconnect = ezusb_disconnect, .id_table = ezusb_table, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(orinoco_driver); diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index e1eac830e2fc..7f207b6e9552 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -1140,6 +1140,7 @@ static struct usb_driver p54u_driver = { .reset_resume = p54u_resume, #endif /* CONFIG_PM */ .soft_unbind = 1, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(p54u_driver); diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index b91d1bb30b41..c5404eb82b2f 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -3765,6 +3765,7 @@ static struct usb_driver rndis_wlan_driver = { .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(rndis_wlan_driver); diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index c88fd3e61090..669aecdb411d 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1980,6 +1980,7 @@ static struct usb_driver rt2500usb_driver = { .disconnect = rt2x00usb_disconnect, .suspend = rt2x00usb_suspend, .resume = rt2x00usb_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(rt2500usb_driver); diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 5601302d09ad..bf78317a6adb 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -1302,6 +1302,7 @@ static struct usb_driver rt2800usb_driver = { .disconnect = rt2x00usb_disconnect, .suspend = rt2x00usb_suspend, .resume = rt2x00usb_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(rt2800usb_driver); diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 155136691a38..77ccbbc7da41 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2527,6 +2527,7 @@ static struct usb_driver rt73usb_driver = { .disconnect = rt2x00usb_disconnect, .suspend = rt2x00usb_suspend, .resume = rt2x00usb_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(rt73usb_driver); diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c index d8114962b0c9..4fb1ca1b86b9 100644 --- a/drivers/net/wireless/rtl818x/rtl8187/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c @@ -1663,6 +1663,7 @@ static struct usb_driver rtl8187_driver = { .id_table = rtl8187_table, .probe = rtl8187_probe, .disconnect = __devexit_p(rtl8187_disconnect), + .disable_hub_initiated_lpm = 1, }; module_usb_driver(rtl8187_driver); diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index 7737fb0c6661..d228358e6a40 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -373,6 +373,7 @@ static struct usb_driver rtl8192cu_driver = { #ifdef CONFIG_AUTOSUSPEND .supports_autosuspend = 1, #endif + .disable_hub_initiated_lpm = 1, }; module_usb_driver(rtl8192cu_driver); diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c index a66b93b7ff9a..48273dd05b63 100644 --- a/drivers/net/wireless/zd1201.c +++ b/drivers/net/wireless/zd1201.c @@ -1905,6 +1905,7 @@ static struct usb_driver zd1201_usb = { .id_table = zd1201_table, .suspend = zd1201_suspend, .resume = zd1201_resume, + .disable_hub_initiated_lpm = 1, }; module_usb_driver(zd1201_usb); diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index f766b3e67c6d..af83c43bcdb1 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -1542,6 +1542,7 @@ static struct usb_driver driver = { .disconnect = disconnect, .pre_reset = pre_reset, .post_reset = post_reset, + .disable_hub_initiated_lpm = 1, }; struct workqueue_struct *zd_workqueue; |