diff options
Diffstat (limited to 'drivers/pci/hotplug/ibmphp_pci.c')
| -rw-r--r-- | drivers/pci/hotplug/ibmphp_pci.c | 730 |
1 files changed, 365 insertions, 365 deletions
diff --git a/drivers/pci/hotplug/ibmphp_pci.c b/drivers/pci/hotplug/ibmphp_pci.c index 814cea22a9fa..dc1876feb06f 100644 --- a/drivers/pci/hotplug/ibmphp_pci.c +++ b/drivers/pci/hotplug/ibmphp_pci.c @@ -37,8 +37,8 @@ static int configure_device(struct pci_func *); static int configure_bridge(struct pci_func **, u8); static struct res_needed *scan_behind_bridge(struct pci_func *, u8); -static int add_new_bus (struct bus_node *, struct resource_node *, struct resource_node *, struct resource_node *, u8); -static u8 find_sec_number (u8 primary_busno, u8 slotno); +static int add_new_bus(struct bus_node *, struct resource_node *, struct resource_node *, struct resource_node *, u8); +static u8 find_sec_number(u8 primary_busno, u8 slotno); /* * NOTE..... If BIOS doesn't provide default routing, we assign: @@ -47,7 +47,7 @@ static u8 find_sec_number (u8 primary_busno, u8 slotno); * We also assign the same irq numbers for multi function devices. * These are PIC mode, so shouldn't matter n.e.ways (hopefully) */ -static void assign_alt_irq (struct pci_func *cur_func, u8 class_code) +static void assign_alt_irq(struct pci_func *cur_func, u8 class_code) { int j; for (j = 0; j < 4; j++) { @@ -78,7 +78,7 @@ static void assign_alt_irq (struct pci_func *cur_func, u8 class_code) * if there is an error, will need to go through all previous functions and * unconfigure....or can add some code into unconfigure_card.... */ -int ibmphp_configure_card (struct pci_func *func, u8 slotno) +int ibmphp_configure_card(struct pci_func *func, u8 slotno) { u16 vendor_id; u32 class; @@ -92,7 +92,7 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno) u8 flag; u8 valid_device = 0x00; /* to see if we are able to read from card any device info at all */ - debug ("inside configure_card, func->busno = %x\n", func->busno); + debug("inside configure_card, func->busno = %x\n", func->busno); device = func->device; cur_func = func; @@ -109,15 +109,15 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno) cur_func->function = function; - debug ("inside the loop, cur_func->busno = %x, cur_func->device = %x, cur_func->function = %x\n", + debug("inside the loop, cur_func->busno = %x, cur_func->device = %x, cur_func->function = %x\n", cur_func->busno, cur_func->device, cur_func->function); - pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_VENDOR_ID, &vendor_id); + pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_VENDOR_ID, &vendor_id); - debug ("vendor_id is %x\n", vendor_id); + debug("vendor_id is %x\n", vendor_id); if (vendor_id != PCI_VENDOR_ID_NOTVALID) { /* found correct device!!! */ - debug ("found valid device, vendor_id = %x\n", vendor_id); + debug("found valid device, vendor_id = %x\n", vendor_id); ++valid_device; @@ -126,29 +126,29 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno) * |_=> 0 = single function device, 1 = multi-function device */ - pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_HEADER_TYPE, &hdr_type); - pci_bus_read_config_dword (ibmphp_pci_bus, devfn, PCI_CLASS_REVISION, &class); + pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_HEADER_TYPE, &hdr_type); + pci_bus_read_config_dword(ibmphp_pci_bus, devfn, PCI_CLASS_REVISION, &class); class_code = class >> 24; - debug ("hrd_type = %x, class = %x, class_code %x\n", hdr_type, class, class_code); + debug("hrd_type = %x, class = %x, class_code %x\n", hdr_type, class, class_code); class >>= 8; /* to take revision out, class = class.subclass.prog i/f */ if (class == PCI_CLASS_NOT_DEFINED_VGA) { - err ("The device %x is VGA compatible and as is not supported for hot plugging. " + err("The device %x is VGA compatible and as is not supported for hot plugging. " "Please choose another device.\n", cur_func->device); return -ENODEV; } else if (class == PCI_CLASS_DISPLAY_VGA) { - err ("The device %x is not supported for hot plugging. Please choose another device.\n", + err("The device %x is not supported for hot plugging. Please choose another device.\n", cur_func->device); return -ENODEV; } switch (hdr_type) { case PCI_HEADER_TYPE_NORMAL: - debug ("single device case.... vendor id = %x, hdr_type = %x, class = %x\n", vendor_id, hdr_type, class); - assign_alt_irq (cur_func, class_code); + debug("single device case.... vendor id = %x, hdr_type = %x, class = %x\n", vendor_id, hdr_type, class); + assign_alt_irq(cur_func, class_code); rc = configure_device(cur_func); if (rc < 0) { /* We need to do this in case some other BARs were properly inserted */ - err ("was not able to configure devfunc %x on bus %x.\n", + err("was not able to configure devfunc %x on bus %x.\n", cur_func->device, cur_func->busno); cleanup_count = 6; goto error; @@ -157,18 +157,18 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno) function = 0x8; break; case PCI_HEADER_TYPE_MULTIDEVICE: - assign_alt_irq (cur_func, class_code); + assign_alt_irq(cur_func, class_code); rc = configure_device(cur_func); if (rc < 0) { /* We need to do this in case some other BARs were properly inserted */ - err ("was not able to configure devfunc %x on bus %x...bailing out\n", + err("was not able to configure devfunc %x on bus %x...bailing out\n", cur_func->device, cur_func->busno); cleanup_count = 6; goto error; } newfunc = kzalloc(sizeof(*newfunc), GFP_KERNEL); if (!newfunc) { - err ("out of system memory\n"); + err("out of system memory\n"); return -ENOMEM; } newfunc->busno = cur_func->busno; @@ -181,32 +181,32 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno) case PCI_HEADER_TYPE_MULTIBRIDGE: class >>= 8; if (class != PCI_CLASS_BRIDGE_PCI) { - err ("This %x is not PCI-to-PCI bridge, and as is not supported for hot-plugging. Please insert another card.\n", + err("This %x is not PCI-to-PCI bridge, and as is not supported for hot-plugging. Please insert another card.\n", cur_func->device); return -ENODEV; } - assign_alt_irq (cur_func, class_code); - rc = configure_bridge (&cur_func, slotno); + assign_alt_irq(cur_func, class_code); + rc = configure_bridge(&cur_func, slotno); if (rc == -ENODEV) { - err ("You chose to insert Single Bridge, or nested bridges, this is not supported...\n"); - err ("Bus %x, devfunc %x\n", cur_func->busno, cur_func->device); + err("You chose to insert Single Bridge, or nested bridges, this is not supported...\n"); + err("Bus %x, devfunc %x\n", cur_func->busno, cur_func->device); return rc; } if (rc) { /* We need to do this in case some other BARs were properly inserted */ - err ("was not able to hot-add PPB properly.\n"); + err("was not able to hot-add PPB properly.\n"); func->bus = 1; /* To indicate to the unconfigure function that this is a PPB */ cleanup_count = 2; goto error; } - pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number); + pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number); flag = 0; for (i = 0; i < 32; i++) { if (func->devices[i]) { newfunc = kzalloc(sizeof(*newfunc), GFP_KERNEL); if (!newfunc) { - err ("out of system memory\n"); + err("out of system memory\n"); return -ENOMEM; } newfunc->busno = sec_number; @@ -220,7 +220,7 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno) } else cur_func->next = newfunc; - rc = ibmphp_configure_card (newfunc, slotno); + rc = ibmphp_configure_card(newfunc, slotno); /* This could only happen if kmalloc failed */ if (rc) { /* We need to do this in case bridge itself got configured properly, but devices behind it failed */ @@ -234,53 +234,53 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno) newfunc = kzalloc(sizeof(*newfunc), GFP_KERNEL); if (!newfunc) { - err ("out of system memory\n"); + err("out of system memory\n"); return -ENOMEM; } newfunc->busno = cur_func->busno; newfunc->device = device; for (j = 0; j < 4; j++) newfunc->irq[j] = cur_func->irq[j]; - for (prev_func = cur_func; prev_func->next; prev_func = prev_func->next) ; + for (prev_func = cur_func; prev_func->next; prev_func = prev_func->next); prev_func->next = newfunc; cur_func = newfunc; break; case PCI_HEADER_TYPE_BRIDGE: class >>= 8; - debug ("class now is %x\n", class); + debug("class now is %x\n", class); if (class != PCI_CLASS_BRIDGE_PCI) { - err ("This %x is not PCI-to-PCI bridge, and as is not supported for hot-plugging. Please insert another card.\n", + err("This %x is not PCI-to-PCI bridge, and as is not supported for hot-plugging. Please insert another card.\n", cur_func->device); return -ENODEV; } - assign_alt_irq (cur_func, class_code); + assign_alt_irq(cur_func, class_code); - debug ("cur_func->busno b4 configure_bridge is %x\n", cur_func->busno); - rc = configure_bridge (&cur_func, slotno); + debug("cur_func->busno b4 configure_bridge is %x\n", cur_func->busno); + rc = configure_bridge(&cur_func, slotno); if (rc == -ENODEV) { - err ("You chose to insert Single Bridge, or nested bridges, this is not supported...\n"); - err ("Bus %x, devfunc %x\n", cur_func->busno, cur_func->device); + err("You chose to insert Single Bridge, or nested bridges, this is not supported...\n"); + err("Bus %x, devfunc %x\n", cur_func->busno, cur_func->device); return rc; } if (rc) { /* We need to do this in case some other BARs were properly inserted */ func->bus = 1; /* To indicate to the unconfigure function that this is a PPB */ - err ("was not able to hot-add PPB properly.\n"); + err("was not able to hot-add PPB properly.\n"); cleanup_count = 2; goto error; } - debug ("cur_func->busno = %x, device = %x, function = %x\n", + debug("cur_func->busno = %x, device = %x, function = %x\n", cur_func->busno, device, function); - pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number); - debug ("after configuring bridge..., sec_number = %x\n", sec_number); + pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number); + debug("after configuring bridge..., sec_number = %x\n", sec_number); flag = 0; for (i = 0; i < 32; i++) { if (func->devices[i]) { - debug ("inside for loop, device is %x\n", i); + debug("inside for loop, device is %x\n", i); newfunc = kzalloc(sizeof(*newfunc), GFP_KERNEL); if (!newfunc) { - err (" out of system memory\n"); + err(" out of system memory\n"); return -ENOMEM; } newfunc->busno = sec_number; @@ -289,12 +289,12 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno) newfunc->irq[j] = cur_func->irq[j]; if (flag) { - for (prev_func = cur_func; prev_func->next; prev_func = prev_func->next) ; + for (prev_func = cur_func; prev_func->next; prev_func = prev_func->next); prev_func->next = newfunc; } else cur_func->next = newfunc; - rc = ibmphp_configure_card (newfunc, slotno); + rc = ibmphp_configure_card(newfunc, slotno); /* Again, this case should not happen... For complete paranoia, will need to call remove_bus */ if (rc) { @@ -310,7 +310,7 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno) function = 0x8; break; default: - err ("MAJOR PROBLEM!!!!, header type not supported? %x\n", hdr_type); + err("MAJOR PROBLEM!!!!, header type not supported? %x\n", hdr_type); return -ENXIO; break; } /* end of switch */ @@ -318,7 +318,7 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno) } /* end of for */ if (!valid_device) { - err ("Cannot find any valid devices on the card. Or unable to read from card.\n"); + err("Cannot find any valid devices on the card. Or unable to read from card.\n"); return -ENODEV; } @@ -327,13 +327,13 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno) error: for (i = 0; i < cleanup_count; i++) { if (cur_func->io[i]) { - ibmphp_remove_resource (cur_func->io[i]); + ibmphp_remove_resource(cur_func->io[i]); cur_func->io[i] = NULL; } else if (cur_func->pfmem[i]) { - ibmphp_remove_resource (cur_func->pfmem[i]); + ibmphp_remove_resource(cur_func->pfmem[i]); cur_func->pfmem[i] = NULL; } else if (cur_func->mem[i]) { - ibmphp_remove_resource (cur_func->mem[i]); + ibmphp_remove_resource(cur_func->mem[i]); cur_func->mem[i] = NULL; } } @@ -345,7 +345,7 @@ error: * Input: pointer to the pci_func * Output: configured PCI, 0, or error */ -static int configure_device (struct pci_func *func) +static int configure_device(struct pci_func *func) { u32 bar[6]; u32 address[] = { @@ -366,7 +366,7 @@ static int configure_device (struct pci_func *func) struct resource_node *pfmem[6]; unsigned int devfn; - debug ("%s - inside\n", __func__); + debug("%s - inside\n", __func__); devfn = PCI_DEVFN(func->device, func->function); ibmphp_pci_bus->number = func->busno; @@ -386,27 +386,27 @@ static int configure_device (struct pci_func *func) pcibios_write_config_dword(cur_func->busno, cur_func->device, PCI_BASE_ADDRESS_0 + 4 * count, 0xFFFFFFFF); */ - pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF); - pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]); + pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF); + pci_bus_read_config_dword(ibmphp_pci_bus, devfn, address[count], &bar[count]); if (!bar[count]) /* This BAR is not implemented */ continue; - debug ("Device %x BAR %d wants %x\n", func->device, count, bar[count]); + debug("Device %x BAR %d wants %x\n", func->device, count, bar[count]); if (bar[count] & PCI_BASE_ADDRESS_SPACE_IO) { /* This is IO */ - debug ("inside IO SPACE\n"); + debug("inside IO SPACE\n"); len[count] = bar[count] & 0xFFFFFFFC; len[count] = ~len[count] + 1; - debug ("len[count] in IO %x, count %d\n", len[count], count); + debug("len[count] in IO %x, count %d\n", len[count], count); io[count] = kzalloc(sizeof(struct resource_node), GFP_KERNEL); if (!io[count]) { - err ("out of system memory\n"); + err("out of system memory\n"); return -ENOMEM; } io[count]->type = IO; @@ -414,36 +414,36 @@ static int configure_device (struct pci_func *func) io[count]->devfunc = PCI_DEVFN(func->device, func->function); io[count]->len = len[count]; if (ibmphp_check_resource(io[count], 0) == 0) { - ibmphp_add_resource (io[count]); + ibmphp_add_resource(io[count]); func->io[count] = io[count]; } else { - err ("cannot allocate requested io for bus %x device %x function %x len %x\n", + err("cannot allocate requested io for bus %x device %x function %x len %x\n", func->busno, func->device, func->function, len[count]); - kfree (io[count]); + kfree(io[count]); return -EIO; } - pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->io[count]->start); + pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], func->io[count]->start); /* _______________This is for debugging purposes only_____________________ */ - debug ("b4 writing, the IO address is %x\n", func->io[count]->start); - pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]); - debug ("after writing.... the start address is %x\n", bar[count]); + debug("b4 writing, the IO address is %x\n", func->io[count]->start); + pci_bus_read_config_dword(ibmphp_pci_bus, devfn, address[count], &bar[count]); + debug("after writing.... the start address is %x\n", bar[count]); /* _________________________________________________________________________*/ } else { /* This is Memory */ if (bar[count] & PCI_BASE_ADDRESS_MEM_PREFETCH) { /* pfmem */ - debug ("PFMEM SPACE\n"); + debug("PFMEM SPACE\n"); len[count] = bar[count] & 0xFFFFFFF0; len[count] = ~len[count] + 1; - debug ("len[count] in PFMEM %x, count %d\n", len[count], count); + debug("len[count] in PFMEM %x, count %d\n", len[count], count); pfmem[count] = kzalloc(sizeof(struct resource_node), GFP_KERNEL); if (!pfmem[count]) { - err ("out of system memory\n"); + err("out of system memory\n"); return -ENOMEM; } pfmem[count]->type = PFMEM; @@ -452,64 +452,64 @@ static int configure_device (struct pci_func *func) func->function); pfmem[count]->len = len[count]; pfmem[count]->fromMem = 0; - if (ibmphp_check_resource (pfmem[count], 0) == 0) { - ibmphp_add_resource (pfmem[count]); + if (ibmphp_check_resource(pfmem[count], 0) == 0) { + ibmphp_add_resource(pfmem[count]); func->pfmem[count] = pfmem[count]; } else { mem_tmp = kzalloc(sizeof(*mem_tmp), GFP_KERNEL); if (!mem_tmp) { - err ("out of system memory\n"); - kfree (pfmem[count]); + err("out of system memory\n"); + kfree(pfmem[count]); return -ENOMEM; } mem_tmp->type = MEM; mem_tmp->busno = pfmem[count]->busno; mem_tmp->devfunc = pfmem[count]->devfunc; mem_tmp->len = pfmem[count]->len; - debug ("there's no pfmem... going into mem.\n"); - if (ibmphp_check_resource (mem_tmp, 0) == 0) { - ibmphp_add_resource (mem_tmp); + debug("there's no pfmem... going into mem.\n"); + if (ibmphp_check_resource(mem_tmp, 0) == 0) { + ibmphp_add_resource(mem_tmp); pfmem[count]->fromMem = 1; pfmem[count]->rangeno = mem_tmp->rangeno; pfmem[count]->start = mem_tmp->start; pfmem[count]->end = mem_tmp->end; - ibmphp_add_pfmem_from_mem (pfmem[count]); + ibmphp_add_pfmem_from_mem(pfmem[count]); func->pfmem[count] = pfmem[count]; } else { - err ("cannot allocate requested pfmem for bus %x, device %x, len %x\n", + err("cannot allocate requested pfmem for bus %x, device %x, len %x\n", func->busno, func->device, len[count]); - kfree (mem_tmp); - kfree (pfmem[count]); + kfree(mem_tmp); + kfree(pfmem[count]); return -EIO; } } - pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->pfmem[count]->start); + pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], func->pfmem[count]->start); /*_______________This is for debugging purposes only______________________________*/ - debug ("b4 writing, start address is %x\n", func->pfmem[count]->start); - pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]); - debug ("after writing, start address is %x\n", bar[count]); + debug("b4 writing, start address is %x\n", func->pfmem[count]->start); + pci_bus_read_config_dword(ibmphp_pci_bus, devfn, address[count], &bar[count]); + debug("after writing, start address is %x\n", bar[count]); /*_________________________________________________________________________________*/ if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64) { /* takes up another dword */ - debug ("inside the mem 64 case, count %d\n", count); + debug("inside the mem 64 case, count %d\n", count); count += 1; /* on the 2nd dword, write all 0s, since we can't handle them n.e.ways */ - pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0x00000000); + pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], 0x00000000); } } else { /* regular memory */ - debug ("REGULAR MEM SPACE\n"); + debug("REGULAR MEM SPACE\n"); len[count] = bar[count] & 0xFFFFFFF0; len[count] = ~len[count] + 1; - debug ("len[count] in Mem %x, count %d\n", len[count], count); + debug("len[count] in Mem %x, count %d\n", len[count], count); mem[count] = kzalloc(sizeof(struct resource_node), GFP_KERNEL); if (!mem[count]) { - err ("out of system memory\n"); + err("out of system memory\n"); return -ENOMEM; } mem[count]->type = MEM; @@ -517,43 +517,43 @@ static int configure_device (struct pci_func *func) mem[count]->devfunc = PCI_DEVFN(func->device, func->function); mem[count]->len = len[count]; - if (ibmphp_check_resource (mem[count], 0) == 0) { - ibmphp_add_resource (mem[count]); + if (ibmphp_check_resource(mem[count], 0) == 0) { + ibmphp_add_resource(mem[count]); func->mem[count] = mem[count]; } else { - err ("cannot allocate requested mem for bus %x, device %x, len %x\n", + err("cannot allocate requested mem for bus %x, device %x, len %x\n", func->busno, func->device, len[count]); - kfree (mem[count]); + kfree(mem[count]); return -EIO; } - pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->mem[count]->start); + pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], func->mem[count]->start); /* _______________________This is for debugging purposes only _______________________*/ - debug ("b4 writing, start address is %x\n", func->mem[count]->start); - pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]); - debug ("after writing, the address is %x\n", bar[count]); + debug("b4 writing, start address is %x\n", func->mem[count]->start); + pci_bus_read_config_dword(ibmphp_pci_bus, devfn, address[count], &bar[count]); + debug("after writing, the address is %x\n", bar[count]); /* __________________________________________________________________________________*/ if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64) { /* takes up another dword */ - debug ("inside mem 64 case, reg. mem, count %d\n", count); + debug("inside mem 64 case, reg. mem, count %d\n", count); count += 1; /* on the 2nd dword, write all 0s, since we can't handle them n.e.ways */ - pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0x00000000); + pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], 0x00000000); } } } /* end of mem */ } /* end of for */ func->bus = 0; /* To indicate that this is not a PPB */ - pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_INTERRUPT_PIN, &irq); + pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_INTERRUPT_PIN, &irq); if ((irq > 0x00) && (irq < 0x05)) - pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_INTERRUPT_LINE, func->irq[irq - 1]); + pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_INTERRUPT_LINE, func->irq[irq - 1]); - pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_CACHE_LINE_SIZE, CACHE); - pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_LATENCY_TIMER, LATENCY); + pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_CACHE_LINE_SIZE, CACHE); + pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_LATENCY_TIMER, LATENCY); - pci_bus_write_config_dword (ibmphp_pci_bus, devfn, PCI_ROM_ADDRESS, 0x00L); - pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_COMMAND, DEVICEENABLE); + pci_bus_write_config_dword(ibmphp_pci_bus, devfn, PCI_ROM_ADDRESS, 0x00L); + pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_COMMAND, DEVICEENABLE); return 0; } @@ -563,7 +563,7 @@ static int configure_device (struct pci_func *func) * Parameters: pci_func * Returns: ******************************************************************************/ -static int configure_bridge (struct pci_func **func_passed, u8 slotno) +static int configure_bridge(struct pci_func **func_passed, u8 slotno) { int count; int i; @@ -597,7 +597,7 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) u8 irq; int retval; - debug ("%s - enter\n", __func__); + debug("%s - enter\n", __func__); devfn = PCI_DEVFN(func->function, func->device); ibmphp_pci_bus->number = func->busno; @@ -606,43 +606,43 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) * behind it */ - pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_PRIMARY_BUS, func->busno); + pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_PRIMARY_BUS, func->busno); /* _____________________For debugging purposes only __________________________ - pci_bus_config_byte (ibmphp_pci_bus, devfn, PCI_PRIMARY_BUS, &pri_number); - debug ("primary # written into the bridge is %x\n", pri_number); + pci_bus_config_byte(ibmphp_pci_bus, devfn, PCI_PRIMARY_BUS, &pri_number); + debug("primary # written into the bridge is %x\n", pri_number); ___________________________________________________________________________*/ /* in EBDA, only get allocated 1 additional bus # per slot */ - sec_number = find_sec_number (func->busno, slotno); + sec_number = find_sec_number(func->busno, slotno); if (sec_number == 0xff) { - err ("cannot allocate secondary bus number for the bridged device\n"); + err("cannot allocate secondary bus number for the bridged device\n"); return -EINVAL; } - debug ("after find_sec_number, the number we got is %x\n", sec_number); - debug ("AFTER FIND_SEC_NUMBER, func->busno IS %x\n", func->busno); + debug("after find_sec_number, the number we got is %x\n", sec_number); + debug("AFTER FIND_SEC_NUMBER, func->busno IS %x\n", func->busno); - pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, sec_number); + pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, sec_number); /* __________________For debugging purposes only __________________________________ - pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number); - debug ("sec_number after write/read is %x\n", sec_number); + pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number); + debug("sec_number after write/read is %x\n", sec_number); ________________________________________________________________________________*/ - pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_SUBORDINATE_BUS, sec_number); + pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_SUBORDINATE_BUS, sec_number); /* __________________For debugging purposes only ____________________________________ - pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SUBORDINATE_BUS, &sec_number); - debug ("subordinate number after write/read is %x\n", sec_number); + pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_SUBORDINATE_BUS, &sec_number); + debug("subordinate number after write/read is %x\n", sec_number); __________________________________________________________________________________*/ - pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_CACHE_LINE_SIZE, CACHE); - pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_LATENCY_TIMER, LATENCY); - pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_SEC_LATENCY_TIMER, LATENCY); + pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_CACHE_LINE_SIZE, CACHE); + pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_LATENCY_TIMER, LATENCY); + pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_SEC_LATENCY_TIMER, LATENCY); - debug ("func->busno is %x\n", func->busno); - debug ("sec_number after writing is %x\n", sec_number); + debug("func->busno is %x\n", func->busno); + debug("sec_number after writing is %x\n", sec_number); /* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! @@ -652,29 +652,29 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) /* First we need to allocate mem/io for the bridge itself in case it needs it */ for (count = 0; address[count]; count++) { /* for 2 BARs */ - pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF); - pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]); + pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF); + pci_bus_read_config_dword(ibmphp_pci_bus, devfn, address[count], &bar[count]); if (!bar[count]) { /* This BAR is not implemented */ - debug ("so we come here then, eh?, count = %d\n", count); + debug("so we come here then, eh?, count = %d\n", count); continue; } // tmp_bar = bar[count]; - debug ("Bar %d wants %x\n", count, bar[count]); + debug("Bar %d wants %x\n", count, bar[count]); if (bar[count] & PCI_BASE_ADDRESS_SPACE_IO) { /* This is IO */ len[count] = bar[count] & 0xFFFFFFFC; len[count] = ~len[count] + 1; - debug ("len[count] in IO = %x\n", len[count]); + debug("len[count] in IO = %x\n", len[count]); bus_io[count] = kzalloc(sizeof(struct resource_node), GFP_KERNEL); if (!bus_io[count]) { - err ("out of system memory\n"); + err("out of system memory\n"); retval = -ENOMEM; goto error; } @@ -683,17 +683,17 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) bus_io[count]->devfunc = PCI_DEVFN(func->device, func->function); bus_io[count]->len = len[count]; - if (ibmphp_check_resource (bus_io[count], 0) == 0) { - ibmphp_add_resource (bus_io[count]); + if (ibmphp_check_resource(bus_io[count], 0) == 0) { + ibmphp_add_resource(bus_io[count]); func->io[count] = bus_io[count]; } else { - err ("cannot allocate requested io for bus %x, device %x, len %x\n", + err("cannot allocate requested io for bus %x, device %x, len %x\n", func->busno, func->device, len[count]); - kfree (bus_io[count]); + kfree(bus_io[count]); return -EIO; } - pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->io[count]->start); + pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], func->io[count]->start); } else { /* This is Memory */ @@ -702,11 +702,11 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) len[count] = bar[count] & 0xFFFFFFF0; len[count] = ~len[count] + 1; - debug ("len[count] in PFMEM = %x\n", len[count]); + debug("len[count] in PFMEM = %x\n", len[count]); bus_pfmem[count] = kzalloc(sizeof(struct resource_node), GFP_KERNEL); if (!bus_pfmem[count]) { - err ("out of system memory\n"); + err("out of system memory\n"); retval = -ENOMEM; goto error; } @@ -716,13 +716,13 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) func->function); bus_pfmem[count]->len = len[count]; bus_pfmem[count]->fromMem = 0; - if (ibmphp_check_resource (bus_pfmem[count], 0) == 0) { - ibmphp_add_resource (bus_pfmem[count]); + if (ibmphp_check_resource(bus_pfmem[count], 0) == 0) { + ibmphp_add_resource(bus_pfmem[count]); func->pfmem[count] = bus_pfmem[count]; } else { mem_tmp = kzalloc(sizeof(*mem_tmp), GFP_KERNEL); if (!mem_tmp) { - err ("out of system memory\n"); + err("out of system memory\n"); retval = -ENOMEM; goto error; } @@ -730,28 +730,28 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) mem_tmp->busno = bus_pfmem[count]->busno; mem_tmp->devfunc = bus_pfmem[count]->devfunc; mem_tmp->len = bus_pfmem[count]->len; - if (ibmphp_check_resource (mem_tmp, 0) == 0) { - ibmphp_add_resource (mem_tmp); + if (ibmphp_check_resource(mem_tmp, 0) == 0) { + ibmphp_add_resource(mem_tmp); bus_pfmem[count]->fromMem = 1; bus_pfmem[count]->rangeno = mem_tmp->rangeno; - ibmphp_add_pfmem_from_mem (bus_pfmem[count]); + ibmphp_add_pfmem_from_mem(bus_pfmem[count]); func->pfmem[count] = bus_pfmem[count]; } else { - err ("cannot allocate requested pfmem for bus %x, device %x, len %x\n", + err("cannot allocate requested pfmem for bus %x, device %x, len %x\n", func->busno, func->device, len[count]); - kfree (mem_tmp); - kfree (bus_pfmem[count]); + kfree(mem_tmp); + kfree(bus_pfmem[count]); return -EIO; } } - pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->pfmem[count]->start); + pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], func->pfmem[count]->start); if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64) { /* takes up another dword */ count += 1; /* on the 2nd dword, write all 0s, since we can't handle them n.e.ways */ - pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0x00000000); + pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], 0x00000000); } } else { @@ -759,11 +759,11 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) len[count] = bar[count] & 0xFFFFFFF0; len[count] = ~len[count] + 1; - debug ("len[count] in Memory is %x\n", len[count]); + debug("len[count] in Memory is %x\n", len[count]); bus_mem[count] = kzalloc(sizeof(struct resource_node), GFP_KERNEL); if (!bus_mem[count]) { - err ("out of system memory\n"); + err("out of system memory\n"); retval = -ENOMEM; goto error; } @@ -772,23 +772,23 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) bus_mem[count]->devfunc = PCI_DEVFN(func->device, func->function); bus_mem[count]->len = len[count]; - if (ibmphp_check_resource (bus_mem[count], 0) == 0) { - ibmphp_add_resource (bus_mem[count]); + if (ibmphp_check_resource(bus_mem[count], 0) == 0) { + ibmphp_add_resource(bus_mem[count]); func->mem[count] = bus_mem[count]; } else { - err ("cannot allocate requested mem for bus %x, device %x, len %x\n", + err("cannot allocate requested mem for bus %x, device %x, len %x\n", func->busno, func->device, len[count]); - kfree (bus_mem[count]); + kfree(bus_mem[count]); return -EIO; } - pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->mem[count]->start); + pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], func->mem[count]->start); if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64) { /* takes up another dword */ count += 1; /* on the 2nd dword, write all 0s, since we can't handle them n.e.ways */ - pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0x00000000); + pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], 0x00000000); } } @@ -796,45 +796,45 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) } /* end of for */ /* Now need to see how much space the devices behind the bridge needed */ - amount_needed = scan_behind_bridge (func, sec_number); + amount_needed = scan_behind_bridge(func, sec_number); if (amount_needed == NULL) return -ENOMEM; ibmphp_pci_bus->number = func->busno; - debug ("after coming back from scan_behind_bridge\n"); - debug ("amount_needed->not_correct = %x\n", amount_needed->not_correct); - debug ("amount_needed->io = %x\n", amount_needed->io); - debug ("amount_needed->mem = %x\n", amount_needed->mem); - debug ("amount_needed->pfmem = %x\n", amount_needed->pfmem); + debug("after coming back from scan_behind_bridge\n"); + debug("amount_needed->not_correct = %x\n", amount_needed->not_correct); + debug("amount_needed->io = %x\n", amount_needed->io); + debug("amount_needed->mem = %x\n", amount_needed->mem); + debug("amount_needed->pfmem = %x\n", amount_needed->pfmem); if (amount_needed->not_correct) { - debug ("amount_needed is not correct\n"); + debug("amount_needed is not correct\n"); for (count = 0; address[count]; count++) { /* for 2 BARs */ if (bus_io[count]) { - ibmphp_remove_resource (bus_io[count]); + ibmphp_remove_resource(bus_io[count]); func->io[count] = NULL; } else if (bus_pfmem[count]) { - ibmphp_remove_resource (bus_pfmem[count]); + ibmphp_remove_resource(bus_pfmem[count]); func->pfmem[count] = NULL; } else if (bus_mem[count]) { - ibmphp_remove_resource (bus_mem[count]); + ibmphp_remove_resource(bus_mem[count]); func->mem[count] = NULL; } } - kfree (amount_needed); + kfree(amount_needed); return -ENODEV; } if (!amount_needed->io) { - debug ("it doesn't want IO?\n"); + debug("it doesn't want IO?\n"); flag_io = 1; } else { - debug ("it wants %x IO behind the bridge\n", amount_needed->io); + debug("it wants %x IO behind the bridge\n", amount_needed->io); io = kzalloc(sizeof(*io), GFP_KERNEL); if (!io) { - err ("out of system memory\n"); + err("out of system memory\n"); retval = -ENOMEM; goto error; } @@ -842,21 +842,21 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) io->busno = func->busno; io->devfunc = PCI_DEVFN(func->device, func->function); io->len = amount_needed->io; - if (ibmphp_check_resource (io, 1) == 0) { - debug ("were we able to add io\n"); - ibmphp_add_resource (io); + if (ibmphp_check_resource(io, 1) == 0) { + debug("were we able to add io\n"); + ibmphp_add_resource(io); flag_io = 1; } } if (!amount_needed->mem) { - debug ("it doesn't want n.e.memory?\n"); + debug("it doesn't want n.e.memory?\n"); flag_mem = 1; } else { - debug ("it wants %x memory behind the bridge\n", amount_needed->mem); + debug("it wants %x memory behind the bridge\n", amount_needed->mem); mem = kzalloc(sizeof(*mem), GFP_KERNEL); if (!mem) { - err ("out of system memory\n"); + err("out of system memory\n"); retval = -ENOMEM; goto error; } @@ -864,21 +864,21 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) mem->busno = func->busno; mem->devfunc = PCI_DEVFN(func->device, func->function); mem->len = amount_needed->mem; - if (ibmphp_check_resource (mem, 1) == 0) { - ibmphp_add_resource (mem); + if (ibmphp_check_resource(mem, 1) == 0) { + ibmphp_add_resource(mem); flag_mem = 1; - debug ("were we able to add mem\n"); + debug("were we able to add mem\n"); } } if (!amount_needed->pfmem) { - debug ("it doesn't want n.e.pfmem mem?\n"); + debug("it doesn't want n.e.pfmem mem?\n"); flag_pfmem = 1; } else { - debug ("it wants %x pfmemory behind the bridge\n", amount_needed->pfmem); + debug("it wants %x pfmemory behind the bridge\n", amount_needed->pfmem); pfmem = kzalloc(sizeof(*pfmem), GFP_KERNEL); if (!pfmem) { - err ("out of system memory\n"); + err("out of system memory\n"); retval = -ENOMEM; goto error; } @@ -887,13 +887,13 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) pfmem->devfunc = PCI_DEVFN(func->device, func->function); pfmem->len = amount_needed->pfmem; pfmem->fromMem = 0; - if (ibmphp_check_resource (pfmem, 1) == 0) { - ibmphp_add_resource (pfmem); + if (ibmphp_check_resource(pfmem, 1) == 0) { + ibmphp_add_resource(pfmem); flag_pfmem = 1; } else { mem_tmp = kzalloc(sizeof(*mem_tmp), GFP_KERNEL); if (!mem_tmp) { - err ("out of system memory\n"); + err("out of system memory\n"); retval = -ENOMEM; goto error; } @@ -901,18 +901,18 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) mem_tmp->busno = pfmem->busno; mem_tmp->devfunc = pfmem->devfunc; mem_tmp->len = pfmem->len; - if (ibmphp_check_resource (mem_tmp, 1) == 0) { - ibmphp_add_resource (mem_tmp); + if (ibmphp_check_resource(mem_tmp, 1) == 0) { + ibmphp_add_resource(mem_tmp); pfmem->fromMem = 1; pfmem->rangeno = mem_tmp->rangeno; - ibmphp_add_pfmem_from_mem (pfmem); + ibmphp_add_pfmem_from_mem(pfmem); flag_pfmem = 1; } } } - debug ("b4 if (flag_io && flag_mem && flag_pfmem)\n"); - debug ("flag_io = %x, flag_mem = %x, flag_pfmem = %x\n", flag_io, flag_mem, flag_pfmem); + debug("b4 if (flag_io && flag_mem && flag_pfmem)\n"); + debug("flag_io = %x, flag_mem = %x, flag_pfmem = %x\n", flag_io, flag_mem, flag_pfmem); if (flag_io && flag_mem && flag_pfmem) { /* If on bootup, there was a bridged card in this slot, @@ -920,127 +920,127 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) * back again, there's no way for us to remove the bus * struct, so no need to kmalloc, can use existing node */ - bus = ibmphp_find_res_bus (sec_number); + bus = ibmphp_find_res_bus(sec_number); if (!bus) { bus = kzalloc(sizeof(*bus), GFP_KERNEL); if (!bus) { - err ("out of system memory\n"); + err("out of system memory\n"); retval = -ENOMEM; goto error; } bus->busno = sec_number; - debug ("b4 adding new bus\n"); - rc = add_new_bus (bus, io, mem, pfmem, func->busno); + debug("b4 adding new bus\n"); + rc = add_new_bus(bus, io, mem, pfmem, func->busno); } else if (!(bus->rangeIO) && !(bus->rangeMem) && !(bus->rangePFMem)) - rc = add_new_bus (bus, io, mem, pfmem, 0xFF); + rc = add_new_bus(bus, io, mem, pfmem, 0xFF); else { - err ("expected bus structure not empty?\n"); + err("expected bus structure not empty?\n"); retval = -EIO; goto error; } if (rc) { if (rc == -ENOMEM) { - ibmphp_remove_bus (bus, func->busno); - kfree (amount_needed); + ibmphp_remove_bus(bus, func->busno); + kfree(amount_needed); return rc; } retval = rc; goto error; } - pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_IO_BASE, &io_base); - pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, &pfmem_base); + pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_IO_BASE, &io_base); + pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, &pfmem_base); if ((io_base & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) { - debug ("io 32\n"); + debug("io 32\n"); need_io_upper = 1; } if ((pfmem_base & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) { - debug ("pfmem 64\n"); + debug("pfmem 64\n"); need_pfmem_upper = 1; } if (bus->noIORanges) { - pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_IO_BASE, 0x00 | bus->rangeIO->start >> 8); - pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_IO_LIMIT, 0x00 | bus->rangeIO->end >> 8); + pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_IO_BASE, 0x00 | bus->rangeIO->start >> 8); + pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_IO_LIMIT, 0x00 | bus->rangeIO->end >> 8); /* _______________This is for debugging purposes only ____________________ - pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_IO_BASE, &temp); - debug ("io_base = %x\n", (temp & PCI_IO_RANGE_TYPE_MASK) << 8); - pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_IO_LIMIT, &temp); - debug ("io_limit = %x\n", (temp & PCI_IO_RANGE_TYPE_MASK) << 8); + pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_IO_BASE, &temp); + debug("io_base = %x\n", (temp & PCI_IO_RANGE_TYPE_MASK) << 8); + pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_IO_LIMIT, &temp); + debug("io_limit = %x\n", (temp & PCI_IO_RANGE_TYPE_MASK) << 8); ________________________________________________________________________*/ if (need_io_upper) { /* since can't support n.e.ways */ - pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_IO_BASE_UPPER16, 0x0000); - pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_IO_LIMIT_UPPER16, 0x0000); + pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_IO_BASE_UPPER16, 0x0000); + pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_IO_LIMIT_UPPER16, 0x0000); } } else { - pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_IO_BASE, 0x00); - pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_IO_LIMIT, 0x00); + pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_IO_BASE, 0x00); + pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_IO_LIMIT, 0x00); } if (bus->noMemRanges) { - pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, 0x0000 | bus->rangeMem->start >> 16); - pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, 0x0000 | bus->rangeMem->end >> 16); + pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, 0x0000 | bus->rangeMem->start >> 16); + pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, 0x0000 | bus->rangeMem->end >> 16); /* ____________________This is for debugging purposes only ________________________ - pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, &temp); - debug ("mem_base = %x\n", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16); - pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, &temp); - debug ("mem_limit = %x\n", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16); + pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, &temp); + debug("mem_base = %x\n", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16); + pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, &temp); + debug("mem_limit = %x\n", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16); __________________________________________________________________________________*/ } else { - pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, 0xffff); - pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, 0x0000); + pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, 0xffff); + pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, 0x0000); } if (bus->noPFMemRanges) { - pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, 0x0000 | bus->rangePFMem->start >> 16); - pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, 0x0000 | bus->rangePFMem->end >> 16); + pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, 0x0000 | bus->rangePFMem->start >> 16); + pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, 0x0000 | bus->rangePFMem->end >> 16); /* __________________________This is for debugging purposes only _______________________ - pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, &temp); - debug ("pfmem_base = %x", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16); - pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &temp); - debug ("pfmem_limit = %x\n", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16); + pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, &temp); + debug("pfmem_base = %x", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16); + pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &temp); + debug("pfmem_limit = %x\n", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16); ______________________________________________________________________________________*/ if (need_pfmem_upper) { /* since can't support n.e.ways */ - pci_bus_write_config_dword (ibmphp_pci_bus, devfn, PCI_PREF_BASE_UPPER32, 0x00000000); - pci_bus_write_config_dword (ibmphp_pci_bus, devfn, PCI_PREF_LIMIT_UPPER32, 0x00000000); + pci_bus_write_config_dword(ibmphp_pci_bus, devfn, PCI_PREF_BASE_UPPER32, 0x00000000); + pci_bus_write_config_dword(ibmphp_pci_bus, devfn, PCI_PREF_LIMIT_UPPER32, 0x00000000); } } else { - pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, 0xffff); - pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, 0x0000); + pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, 0xffff); + pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, 0x0000); } - debug ("b4 writing control information\n"); + debug("b4 writing control information\n"); - pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_INTERRUPT_PIN, &irq); + pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_INTERRUPT_PIN, &irq); if ((irq > 0x00) && (irq < 0x05)) - pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_INTERRUPT_LINE, func->irq[irq - 1]); + pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_INTERRUPT_LINE, func->irq[irq - 1]); /* - pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, ctrl); - pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, PCI_BRIDGE_CTL_PARITY); - pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, PCI_BRIDGE_CTL_SERR); + pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, ctrl); + pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, PCI_BRIDGE_CTL_PARITY); + pci_bus_write_config_byte(ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, PCI_BRIDGE_CTL_SERR); */ - pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_COMMAND, DEVICEENABLE); - pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, 0x07); + pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_COMMAND, DEVICEENABLE); + pci_bus_write_config_word(ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, 0x07); for (i = 0; i < 32; i++) { if (amount_needed->devices[i]) { - debug ("device where devices[i] is 1 = %x\n", i); + debug("device where devices[i] is 1 = %x\n", i); func->devices[i] = 1; } } func->bus = 1; /* For unconfiguring, to indicate it's PPB */ func_passed = &func; - debug ("func->busno b4 returning is %x\n", func->busno); - debug ("func->busno b4 returning in the other structure is %x\n", (*func_passed)->busno); - kfree (amount_needed); + debug("func->busno b4 returning is %x\n", func->busno); + debug("func->busno b4 returning in the other structure is %x\n", (*func_passed)->busno); + kfree(amount_needed); return 0; } else { - err ("Configuring bridge was unsuccessful...\n"); + err("Configuring bridge was unsuccessful...\n"); mem_tmp = NULL; retval = -EIO; goto error; @@ -1049,20 +1049,20 @@ static int configure_bridge (struct pci_func **func_passed, u8 slotno) error: kfree(amount_needed); if (pfmem) - ibmphp_remove_resource (pfmem); + ibmphp_remove_resource(pfmem); if (io) - ibmphp_remove_resource (io); + ibmphp_remove_resource(io); if (mem) - ibmphp_remove_resource (mem); + ibmphp_remove_resource(mem); for (i = 0; i < 2; i++) { /* for 2 BARs */ if (bus_io[i]) { - ibmphp_remove_resource (bus_io[i]); + ibmphp_remove_resource(bus_io[i]); func->io[i] = NULL; } else if (bus_pfmem[i]) { - ibmphp_remove_resource (bus_pfmem[i]); + ibmphp_remove_resource(bus_pfmem[i]); func->pfmem[i] = NULL; } else if (bus_mem[i]) { - ibmphp_remove_resource (bus_mem[i]); + ibmphp_remove_resource(bus_mem[i]); func->mem[i] = NULL; } } @@ -1075,7 +1075,7 @@ error: * Input: bridge function * Output: amount of resources needed *****************************************************************************/ -static struct res_needed *scan_behind_bridge (struct pci_func *func, u8 busno) +static struct res_needed *scan_behind_bridge(struct pci_func *func, u8 busno) { int count, len[6]; u16 vendor_id; @@ -1102,36 +1102,36 @@ static struct res_needed *scan_behind_bridge (struct pci_func *func, u8 busno) ibmphp_pci_bus->number = busno; - debug ("the bus_no behind the bridge is %x\n", busno); - debug ("scanning devices behind the bridge...\n"); + debug("the bus_no behind the bridge is %x\n", busno); + debug("scanning devices behind the bridge...\n"); for (device = 0; device < 32; device++) { amount->devices[device] = 0; for (function = 0; function < 8; function++) { devfn = PCI_DEVFN(device, function); - pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_VENDOR_ID, &vendor_id); + pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_VENDOR_ID, &vendor_id); if (vendor_id != PCI_VENDOR_ID_NOTVALID) { /* found correct device!!! */ howmany++; - pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_HEADER_TYPE, &hdr_type); - pci_bus_read_config_dword (ibmphp_pci_bus, devfn, PCI_CLASS_REVISION, &class); + pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_HEADER_TYPE, &hdr_type); + pci_bus_read_config_dword(ibmphp_pci_bus, devfn, PCI_CLASS_REVISION, &class); - debug ("hdr_type behind the bridge is %x\n", hdr_type); - if (hdr_type & PCI_HEADER_TYPE_BRIDGE) { - err ("embedded bridges not supported for hot-plugging.\n"); + debug("hdr_type behind the bridge is %x\n", hdr_type); + if ((hdr_type & 0x7f) == PCI_HEADER_TYPE_BRIDGE) { + err("embedded bridges not supported for hot-plugging.\n"); amount->not_correct = 1; return amount; } class >>= 8; /* to take revision out, class = class.subclass.prog i/f */ if (class == PCI_CLASS_NOT_DEFINED_VGA) { - err ("The device %x is VGA compatible and as is not supported for hot plugging. Please choose another device.\n", device); + err("The device %x is VGA compatible and as is not supported for hot plugging. Please choose another device.\n", device); amount->not_correct = 1; return amount; } else if (class == PCI_CLASS_DISPLAY_VGA) { - err ("The device %x is not supported for hot plugging. Please choose another device.\n", device); + err("The device %x is not supported for hot plugging. Please choose another device.\n", device); amount->not_correct = 1; return amount; } @@ -1141,23 +1141,23 @@ static struct res_needed *scan_behind_bridge (struct pci_func *func, u8 busno) for (count = 0; address[count]; count++) { /* for 6 BARs */ /* - pci_bus_read_config_byte (ibmphp_pci_bus, devfn, address[count], &tmp); + pci_bus_read_config_byte(ibmphp_pci_bus, devfn, address[count], &tmp); if (tmp & 0x01) // IO - pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFD); + pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFD); else // MEMORY - pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF); + pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF); */ - pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF); - pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]); + pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF); + pci_bus_read_config_dword(ibmphp_pci_bus, devfn, address[count], &bar[count]); - debug ("what is bar[count]? %x, count = %d\n", bar[count], count); + debug("what is bar[count]? %x, count = %d\n", bar[count], count); if (!bar[count]) /* This BAR is not implemented */ continue; //tmp_bar = bar[count]; - debug ("count %d device %x function %x wants %x resources\n", count, device, function, bar[count]); + debug("count %d device %x function %x wants %x resources\n", count, device, function, bar[count]); if (bar[count] & PCI_BASE_ADDRESS_SPACE_IO) { /* This is IO */ @@ -1211,7 +1211,7 @@ static struct res_needed *scan_behind_bridge (struct pci_func *func, u8 busno) * Change: we also call these functions even if we configured the card ourselves (i.e., not * the bootup case), since it should work same way */ -static int unconfigure_boot_device (u8 busno, u8 device, u8 function) +static int unconfigure_boot_device(u8 busno, u8 device, u8 function) { u32 start_address; u32 address[] = { @@ -1234,30 +1234,30 @@ static int unconfigure_boot_device (u8 busno, u8 device, u8 function) u32 tmp_address; unsigned int devfn; - debug ("%s - enter\n", __func__); + debug("%s - enter\n", __func__); - bus = ibmphp_find_res_bus (busno); + bus = ibmphp_find_res_bus(busno); if (!bus) { - debug ("cannot find corresponding bus.\n"); + debug("cannot find corresponding bus.\n"); return -EINVAL; } devfn = PCI_DEVFN(device, function); ibmphp_pci_bus->number = busno; for (count = 0; address[count]; count++) { /* for 6 BARs */ - pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &start_address); + pci_bus_read_config_dword(ibmphp_pci_bus, devfn, address[count], &start_address); /* We can do this here, b/c by that time the device driver of the card has been stopped */ - pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF); - pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &size); - pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], start_address); + pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF); + pci_bus_read_config_dword(ibmphp_pci_bus, devfn, address[count], &size); + pci_bus_write_config_dword(ibmphp_pci_bus, devfn, address[count], start_address); - debug ("start_address is %x\n", start_address); - debug ("busno, device, function %x %x %x\n", busno, device, function); + debug("start_address is %x\n", start_address); + debug("busno, device, function %x %x %x\n", busno, device, function); if (!size) { /* This BAR is not implemented */ - debug ("is this bar no implemented?, count = %d\n", count); + debug("is this bar no implemented?, count = %d\n", count); continue; } tmp_address = start_address; @@ -1267,24 +1267,24 @@ static int unconfigure_boot_device (u8 busno, u8 device, u8 function) size = size & 0xFFFFFFFC; size = ~size + 1; end_address = start_address + size - 1; - if (ibmphp_find_resource (bus, start_address, &io, IO) < 0) { - err ("cannot find corresponding IO resource to remove\n"); + if (ibmphp_find_resource(bus, start_address, &io, IO) < 0) { + err("cannot find corresponding IO resource to remove\n"); return -EIO; } - debug ("io->start = %x\n", io->start); + debug("io->start = %x\n", io->start); temp_end = io->end; start_address = io->end + 1; - ibmphp_remove_resource (io); + ibmphp_remove_resource(io); /* This is needed b/c of the old I/O restrictions in the BIOS */ while (temp_end < end_address) { - if (ibmphp_find_resource (bus, start_address, &io, IO) < 0) { - err ("cannot find corresponding IO resource to remove\n"); + if (ibmphp_find_resource(bus, start_address, &io, IO) < 0) { + err("cannot find corresponding IO resource to remove\n"); return -EIO; } - debug ("io->start = %x\n", io->start); + debug("io->start = %x\n", io->start); temp_end = io->end; start_address = io->end + 1; - ibmphp_remove_resource (io); + ibmphp_remove_resource(io); } /* ????????? DO WE NEED TO WRITE ANYTHING INTO THE PCI CONFIG SPACE BACK ?????????? */ @@ -1292,29 +1292,29 @@ static int unconfigure_boot_device (u8 busno, u8 device, u8 function) /* This is Memory */ if (start_address & PCI_BASE_ADDRESS_MEM_PREFETCH) { /* pfmem */ - debug ("start address of pfmem is %x\n", start_address); + debug("start address of pfmem is %x\n", start_address); start_address &= PCI_BASE_ADDRESS_MEM_MASK; - if (ibmphp_find_resource (bus, start_address, &pfmem, PFMEM) < 0) { - err ("cannot find corresponding PFMEM resource to remove\n"); + if (ibmphp_find_resource(bus, start_address, &pfmem, PFMEM) < 0) { + err("cannot find corresponding PFMEM resource to remove\n"); return -EIO; } if (pfmem) { - debug ("pfmem->start = %x\n", pfmem->start); + debug("pfmem->start = %x\n", pfmem->start); ibmphp_remove_resource(pfmem); } } else { /* regular memory */ - debug ("start address of mem is %x\n", start_address); + debug("start address of mem is %x\n", start_address); start_address &= PCI_BASE_ADDRESS_MEM_MASK; - if (ibmphp_find_resource (bus, start_address, &mem, MEM) < 0) { - err ("cannot find corresponding MEM resource to remove\n"); + if (ibmphp_find_resource(bus, start_address, &mem, MEM) < 0) { + err("cannot find corresponding MEM resource to remove\n"); return -EIO; } if (mem) { - debug ("mem->start = %x\n", mem->start); + debug("mem->start = %x\n", mem->start); ibmphp_remove_resource(mem); } @@ -1329,7 +1329,7 @@ static int unconfigure_boot_device (u8 busno, u8 device, u8 function) return 0; } -static int unconfigure_boot_bridge (u8 busno, u8 device, u8 function) +static int unconfigure_boot_bridge(u8 busno, u8 device, u8 function) { int count; int bus_no, pri_no, sub_no, sec_no = 0; @@ -1349,40 +1349,40 @@ static int unconfigure_boot_bridge (u8 busno, u8 device, u8 function) devfn = PCI_DEVFN(device, function); ibmphp_pci_bus->number = busno; bus_no = (int) busno; - debug ("busno is %x\n", busno); - pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_PRIMARY_BUS, &pri_number); - debug ("%s - busno = %x, primary_number = %x\n", __func__, busno, pri_number); + debug("busno is %x\n", busno); + pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_PRIMARY_BUS, &pri_number); + debug("%s - busno = %x, primary_number = %x\n", __func__, busno, pri_number); - pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number); - debug ("sec_number is %x\n", sec_number); + pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number); + debug("sec_number is %x\n", sec_number); sec_no = (int) sec_number; pri_no = (int) pri_number; if (pri_no != bus_no) { - err ("primary numbers in our structures and pci config space don't match.\n"); + err("primary numbers in our structures and pci config space don't match.\n"); return -EINVAL; } - pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SUBORDINATE_BUS, &sub_number); + pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_SUBORDINATE_BUS, &sub_number); sub_no = (int) sub_number; - debug ("sub_no is %d, sec_no is %d\n", sub_no, sec_no); + debug("sub_no is %d, sec_no is %d\n", sub_no, sec_no); if (sec_no != sub_number) { - err ("there're more buses behind this bridge. Hot removal is not supported. Please choose another card\n"); + err("there're more buses behind this bridge. Hot removal is not supported. Please choose another card\n"); return -ENODEV; } - bus = ibmphp_find_res_bus (sec_number); + bus = ibmphp_find_res_bus(sec_number); if (!bus) { - err ("cannot find Bus structure for the bridged device\n"); + err("cannot find Bus structure for the bridged device\n"); return -EINVAL; } debug("bus->busno is %x\n", bus->busno); debug("sec_number is %x\n", sec_number); - ibmphp_remove_bus (bus, busno); + ibmphp_remove_bus(bus, busno); for (count = 0; address[count]; count++) { /* for 2 BARs */ - pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &start_address); + pci_bus_read_config_dword(ibmphp_pci_bus, devfn, address[count], &start_address); if (!start_address) { /* This BAR is not implemented */ @@ -1394,14 +1394,14 @@ static int unconfigure_boot_bridge (u8 busno, u8 device, u8 function) if (start_address & PCI_BASE_ADDRESS_SPACE_IO) { /* This is IO */ start_address &= PCI_BASE_ADDRESS_IO_MASK; - if (ibmphp_find_resource (bus, start_address, &io, IO) < 0) { - err ("cannot find corresponding IO resource to remove\n"); + if (ibmphp_find_resource(bus, start_address, &io, IO) < 0) { + err("cannot find corresponding IO resource to remove\n"); return -EIO; } if (io) - debug ("io->start = %x\n", io->start); + debug("io->start = %x\n", io->start); - ibmphp_remove_resource (io); + ibmphp_remove_resource(io); /* ????????? DO WE NEED TO WRITE ANYTHING INTO THE PCI CONFIG SPACE BACK ?????????? */ } else { @@ -1409,24 +1409,24 @@ static int unconfigure_boot_bridge (u8 busno, u8 device, u8 function) if (start_address & PCI_BASE_ADDRESS_MEM_PREFETCH) { /* pfmem */ start_address &= PCI_BASE_ADDRESS_MEM_MASK; - if (ibmphp_find_resource (bus, start_address, &pfmem, PFMEM) < 0) { - err ("cannot find corresponding PFMEM resource to remove\n"); + if (ibmphp_find_resource(bus, start_address, &pfmem, PFMEM) < 0) { + err("cannot find corresponding PFMEM resource to remove\n"); return -EINVAL; } if (pfmem) { - debug ("pfmem->start = %x\n", pfmem->start); + debug("pfmem->start = %x\n", pfmem->start); ibmphp_remove_resource(pfmem); } } else { /* regular memory */ start_address &= PCI_BASE_ADDRESS_MEM_MASK; - if (ibmphp_find_resource (bus, start_address, &mem, MEM) < 0) { - err ("cannot find corresponding MEM resource to remove\n"); + if (ibmphp_find_resource(bus, start_address, &mem, MEM) < 0) { + err("cannot find corresponding MEM resource to remove\n"); return -EINVAL; } if (mem) { - debug ("mem->start = %x\n", mem->start); + debug("mem->start = %x\n", mem->start); ibmphp_remove_resource(mem); } @@ -1437,11 +1437,11 @@ static int unconfigure_boot_bridge (u8 busno, u8 device, u8 function) } } /* end of mem */ } /* end of for */ - debug ("%s - exiting, returning success\n", __func__); + debug("%s - exiting, returning success\n", __func__); return 0; } -static int unconfigure_boot_card (struct slot *slot_cur) +static int unconfigure_boot_card(struct slot *slot_cur) { u16 vendor_id; u32 class; @@ -1453,57 +1453,57 @@ static int unconfigure_boot_card (struct slot *slot_cur) unsigned int devfn; u8 valid_device = 0x00; /* To see if we are ever able to find valid device and read it */ - debug ("%s - enter\n", __func__); + debug("%s - enter\n", __func__); device = slot_cur->device; busno = slot_cur->bus; - debug ("b4 for loop, device is %x\n", device); + debug("b4 for loop, device is %x\n", device); /* For every function on the card */ for (function = 0x0; function < 0x08; function++) { devfn = PCI_DEVFN(device, function); ibmphp_pci_bus->number = busno; - pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_VENDOR_ID, &vendor_id); + pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_VENDOR_ID, &vendor_id); if (vendor_id != PCI_VENDOR_ID_NOTVALID) { /* found correct device!!! */ ++valid_device; - debug ("%s - found correct device\n", __func__); + debug("%s - found correct device\n", __func__); /* header: x x x x x x x x * | |___________|=> 1=PPB bridge, 0=normal device, 2=CardBus Bridge * |_=> 0 = single function device, 1 = multi-function device */ - pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_HEADER_TYPE, &hdr_type); - pci_bus_read_config_dword (ibmphp_pci_bus, devfn, PCI_CLASS_REVISION, &class); + pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_HEADER_TYPE, &hdr_type); + pci_bus_read_config_dword(ibmphp_pci_bus, devfn, PCI_CLASS_REVISION, &class); - debug ("hdr_type %x, class %x\n", hdr_type, class); + debug("hdr_type %x, class %x\n", hdr_type, class); class >>= 8; /* to take revision out, class = class.subclass.prog i/f */ if (class == PCI_CLASS_NOT_DEFINED_VGA) { - err ("The device %x function %x is VGA compatible and is not supported for hot removing. Please choose another device.\n", device, function); + err("The device %x function %x is VGA compatible and is not supported for hot removing. Please choose another device.\n", device, function); return -ENODEV; } else if (class == PCI_CLASS_DISPLAY_VGA) { - err ("The device %x function %x is not supported for hot removing. Please choose another device.\n", device, function); + err("The device %x function %x is not supported for hot removing. Please choose another device.\n", device, function); return -ENODEV; } switch (hdr_type) { case PCI_HEADER_TYPE_NORMAL: - rc = unconfigure_boot_device (busno, device, function); + rc = unconfigure_boot_device(busno, device, function); if (rc) { - err ("was not able to unconfigure device %x func %x on bus %x. bailing out...\n", + err("was not able to unconfigure device %x func %x on bus %x. bailing out...\n", device, function, busno); return rc; } function = 0x8; break; case PCI_HEADER_TYPE_MULTIDEVICE: - rc = unconfigure_boot_device (busno, device, function); + rc = unconfigure_boot_device(busno, device, function); if (rc) { - err ("was not able to unconfigure device %x func %x on bus %x. bailing out...\n", + err("was not able to unconfigure device %x func %x on bus %x. bailing out...\n", device, function, busno); return rc; } @@ -1511,12 +1511,12 @@ static int unconfigure_boot_card (struct slot *slot_cur) case PCI_HEADER_TYPE_BRIDGE: class >>= 8; if (class != PCI_CLASS_BRIDGE_PCI) { - err ("This device %x function %x is not PCI-to-PCI bridge, and is not supported for hot-removing. Please try another card.\n", device, function); + err("This device %x function %x is not PCI-to-PCI bridge, and is not supported for hot-removing. Please try another card.\n", device, function); return -ENODEV; } - rc = unconfigure_boot_bridge (busno, device, function); + rc = unconfigure_boot_bridge(busno, device, function); if (rc != 0) { - err ("was not able to hot-remove PPB properly.\n"); + err("was not able to hot-remove PPB properly.\n"); return rc; } @@ -1525,17 +1525,17 @@ static int unconfigure_boot_card (struct slot *slot_cur) case PCI_HEADER_TYPE_MULTIBRIDGE: class >>= 8; if (class != PCI_CLASS_BRIDGE_PCI) { - err ("This device %x function %x is not PCI-to-PCI bridge, and is not supported for hot-removing. Please try another card.\n", device, function); + err("This device %x function %x is not PCI-to-PCI bridge, and is not supported for hot-removing. Please try another card.\n", device, function); return -ENODEV; } - rc = unconfigure_boot_bridge (busno, device, function); + rc = unconfigure_boot_bridge(busno, device, function); if (rc != 0) { - err ("was not able to hot-remove PPB properly.\n"); + err("was not able to hot-remove PPB properly.\n"); return rc; } break; default: - err ("MAJOR PROBLEM!!!! Cannot read device's header\n"); + err("MAJOR PROBLEM!!!! Cannot read device's header\n"); return -1; break; } /* end of switch */ @@ -1543,7 +1543,7 @@ static int unconfigure_boot_card (struct slot *slot_cur) } /* end of for */ if (!valid_device) { - err ("Could not find device to unconfigure. Or could not read the card.\n"); + err("Could not find device to unconfigure. Or could not read the card.\n"); return -1; } return 0; @@ -1558,7 +1558,7 @@ static int unconfigure_boot_card (struct slot *slot_cur) * !!!!!!!!!!!!!!!!!!!!!!!!!FOR BUSES!!!!!!!!!!!! * Returns: 0, -1, -ENODEV */ -int ibmphp_unconfigure_card (struct slot **slot_cur, int the_end) +int ibmphp_unconfigure_card(struct slot **slot_cur, int the_end) { int i; int count; @@ -1567,11 +1567,11 @@ int ibmphp_unconfigure_card (struct slot **slot_cur, int the_end) struct pci_func *cur_func = NULL; struct pci_func *temp_func; - debug ("%s - enter\n", __func__); + debug("%s - enter\n", __func__); if (!the_end) { /* Need to unconfigure the card */ - rc = unconfigure_boot_card (sl); + rc = unconfigure_boot_card(sl); if ((rc == -ENODEV) || (rc == -EIO) || (rc == -EINVAL)) { /* In all other cases, will still need to get rid of func structure if it exists */ return rc; @@ -1591,34 +1591,34 @@ int ibmphp_unconfigure_card (struct slot **slot_cur, int the_end) for (i = 0; i < count; i++) { if (cur_func->io[i]) { - debug ("io[%d] exists\n", i); + debug("io[%d] exists\n", i); if (the_end > 0) - ibmphp_remove_resource (cur_func->io[i]); + ibmphp_remove_resource(cur_func->io[i]); cur_func->io[i] = NULL; } if (cur_func->mem[i]) { - debug ("mem[%d] exists\n", i); + debug("mem[%d] exists\n", i); if (the_end > 0) - ibmphp_remove_resource (cur_func->mem[i]); + ibmphp_remove_resource(cur_func->mem[i]); cur_func->mem[i] = NULL; } if (cur_func->pfmem[i]) { - debug ("pfmem[%d] exists\n", i); + debug("pfmem[%d] exists\n", i); if (the_end > 0) - ibmphp_remove_resource (cur_func->pfmem[i]); + ibmphp_remove_resource(cur_func->pfmem[i]); cur_func->pfmem[i] = NULL; } } temp_func = cur_func->next; - kfree (cur_func); + kfree(cur_func); cur_func = temp_func; } } sl->func = NULL; *slot_cur = sl; - debug ("%s - exit\n", __func__); + debug("%s - exit\n", __func__); return 0; } @@ -1630,7 +1630,7 @@ int ibmphp_unconfigure_card (struct slot **slot_cur, int the_end) * Output: bus added to the correct spot * 0, -1, error */ -static int add_new_bus (struct bus_node *bus, struct resource_node *io, struct resource_node *mem, struct resource_node *pfmem, u8 parent_busno) +static int add_new_bus(struct bus_node *bus, struct resource_node *io, struct resource_node *mem, struct resource_node *pfmem, u8 parent_busno) { struct range_node *io_range = NULL; struct range_node *mem_range = NULL; @@ -1639,18 +1639,18 @@ static int add_new_bus (struct bus_node *bus, struct resource_node *io, struct r /* Trying to find the parent bus number */ if (parent_busno != 0xFF) { - cur_bus = ibmphp_find_res_bus (parent_busno); + cur_bus = ibmphp_find_res_bus(parent_busno); if (!cur_bus) { - err ("strange, cannot find bus which is supposed to be at the system... something is terribly wrong...\n"); + err("strange, cannot find bus which is supposed to be at the system... something is terribly wrong...\n"); return -ENODEV; } - list_add (&bus->bus_list, &cur_bus->bus_list); + list_add(&bus->bus_list, &cur_bus->bus_list); } if (io) { io_range = kzalloc(sizeof(*io_range), GFP_KERNEL); if (!io_range) { - err ("out of system memory\n"); + err("out of system memory\n"); return -ENOMEM; } io_range->start = io->start; @@ -1662,7 +1662,7 @@ static int add_new_bus (struct bus_node *bus, struct resource_node *io, struct r if (mem) { mem_range = kzalloc(sizeof(*mem_range), GFP_KERNEL); if (!mem_range) { - err ("out of system memory\n"); + err("out of system memory\n"); return -ENOMEM; } mem_range->start = mem->start; @@ -1674,7 +1674,7 @@ static int add_new_bus (struct bus_node *bus, struct resource_node *io, struct r if (pfmem) { pfmem_range = kzalloc(sizeof(*pfmem_range), GFP_KERNEL); if (!pfmem_range) { - err ("out of system memory\n"); + err("out of system memory\n"); return -ENOMEM; } pfmem_range->start = pfmem->start; @@ -1691,27 +1691,27 @@ static int add_new_bus (struct bus_node *bus, struct resource_node *io, struct r * Parameters: bus_number of the primary bus * Returns: bus_number of the secondary bus or 0xff in case of failure */ -static u8 find_sec_number (u8 primary_busno, u8 slotno) +static u8 find_sec_number(u8 primary_busno, u8 slotno) { int min, max; u8 busno; struct bus_info *bus; struct bus_node *bus_cur; - bus = ibmphp_find_same_bus_num (primary_busno); + bus = ibmphp_find_same_bus_num(primary_busno); if (!bus) { - err ("cannot get slot range of the bus from the BIOS\n"); + err("cannot get slot range of the bus from the BIOS\n"); return 0xff; } max = bus->slot_max; min = bus->slot_min; if ((slotno > max) || (slotno < min)) { - err ("got the wrong range\n"); + err("got the wrong range\n"); return 0xff; } busno = (u8) (slotno - (u8) min); busno += primary_busno + 0x01; - bus_cur = ibmphp_find_res_bus (busno); + bus_cur = ibmphp_find_res_bus(busno); /* either there is no such bus number, or there are no ranges, which * can only happen if we removed the bridged device in previous load * of the driver, and now only have the skeleton bus struct |