diff options
Diffstat (limited to 'drivers/phy/amlogic')
| -rw-r--r-- | drivers/phy/amlogic/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/phy/amlogic/Makefile | 1 | ||||
| -rw-r--r-- | drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c | 413 | ||||
| -rw-r--r-- | drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c | 203 | ||||
| -rw-r--r-- | drivers/phy/amlogic/phy-meson-axg-pcie.c | 6 | ||||
| -rw-r--r-- | drivers/phy/amlogic/phy-meson-g12a-usb2.c | 4 | ||||
| -rw-r--r-- | drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c | 6 | ||||
| -rw-r--r-- | drivers/phy/amlogic/phy-meson-gxl-usb2.c | 7 |
8 files changed, 569 insertions, 84 deletions
diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig index 617cf073e9aa..db5d0cd757e3 100644 --- a/drivers/phy/amlogic/Kconfig +++ b/drivers/phy/amlogic/Kconfig @@ -66,7 +66,20 @@ config PHY_MESON_AXG_MIPI_PCIE_ANALOG depends on OF && (ARCH_MESON || COMPILE_TEST) select GENERIC_PHY select REGMAP_MMIO + select GENERIC_PHY_MIPI_DPHY help Enable this to support the Meson MIPI + PCIE analog PHY found in Meson AXG SoCs. If unsure, say N. + +config PHY_MESON_AXG_MIPI_DPHY + tristate "Meson AXG MIPI DPHY driver" + default ARCH_MESON + depends on OF && (ARCH_MESON || COMPILE_TEST) + select GENERIC_PHY + select REGMAP_MMIO + select GENERIC_PHY_MIPI_DPHY + help + Enable this to support the Meson MIPI DPHY found in Meson AXG + SoCs. + If unsure, say N. diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile index 99702a45e9be..8fa07fbd0d92 100644 --- a/drivers/phy/amlogic/Makefile +++ b/drivers/phy/amlogic/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE) += phy-meson-g12a-usb3-pcie.o obj-$(CONFIG_PHY_MESON_AXG_PCIE) += phy-meson-axg-pcie.o obj-$(CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG) += phy-meson-axg-mipi-pcie-analog.o +obj-$(CONFIG_PHY_MESON_AXG_MIPI_DPHY) += phy-meson-axg-mipi-dphy.o diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c new file mode 100644 index 000000000000..cd2332bf0e31 --- /dev/null +++ b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c @@ -0,0 +1,413 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Meson AXG MIPI DPHY driver + * + * Copyright (C) 2018 Amlogic, Inc. All rights reserved + * Copyright (C) 2020 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +/* [31] soft reset for the phy. + * 1: reset. 0: dessert the reset. + * [30] clock lane soft reset. + * [29] data byte lane 3 soft reset. + * [28] data byte lane 2 soft reset. + * [27] data byte lane 1 soft reset. + * [26] data byte lane 0 soft reset. + * [25] mipi dsi pll clock selection. + * 1: clock from fixed 850Mhz clock source. 0: from VID2 PLL. + * [12] mipi HSbyteclk enable. + * [11] mipi divider clk selection. + * 1: select the mipi DDRCLKHS from clock divider. + * 0: from PLL clock. + * [10] mipi clock divider control. + * 1: /4. 0: /2. + * [9] mipi divider output enable. + * [8] mipi divider counter enable. + * [7] PLL clock enable. + * [5] LPDT data endian. + * 1 = transfer the high bit first. 0 : transfer the low bit first. + * [4] HS data endian. + * [3] force data byte lane in stop mode. + * [2] force data byte lane 0 in receiver mode. + * [1] write 1 to sync the txclkesc input. the internal logic have to + * use txclkesc to decide Txvalid and Txready. + * [0] enalbe the MIPI DPHY TxDDRClk. + */ +#define MIPI_DSI_PHY_CTRL 0x0 + +/* [31] clk lane tx_hs_en control selection. + * 1: from register. 0: use clk lane state machine. + * [30] register bit for clock lane tx_hs_en. + * [29] clk lane tx_lp_en contrl selection. + * 1: from register. 0: from clk lane state machine. + * [28] register bit for clock lane tx_lp_en. + * [27] chan0 tx_hs_en control selection. + * 1: from register. 0: from chan0 state machine. + * [26] register bit for chan0 tx_hs_en. + * [25] chan0 tx_lp_en control selection. + * 1: from register. 0: from chan0 state machine. + * [24] register bit from chan0 tx_lp_en. + * [23] chan0 rx_lp_en control selection. + * 1: from register. 0: from chan0 state machine. + * [22] register bit from chan0 rx_lp_en. + * [21] chan0 contention detection enable control selection. + * 1: from register. 0: from chan0 state machine. + * [20] register bit from chan0 contention dectection enable. + * [19] chan1 tx_hs_en control selection. + * 1: from register. 0: from chan0 state machine. + * [18] register bit for chan1 tx_hs_en. + * [17] chan1 tx_lp_en control selection. + * 1: from register. 0: from chan0 state machine. + * [16] register bit from chan1 tx_lp_en. + * [15] chan2 tx_hs_en control selection. + * 1: from register. 0: from chan0 state machine. + * [14] register bit for chan2 tx_hs_en. + * [13] chan2 tx_lp_en control selection. + * 1: from register. 0: from chan0 state machine. + * [12] register bit from chan2 tx_lp_en. + * [11] chan3 tx_hs_en control selection. + * 1: from register. 0: from chan0 state machine. + * [10] register bit for chan3 tx_hs_en. + * [9] chan3 tx_lp_en control selection. + * 1: from register. 0: from chan0 state machine. + * [8] register bit from chan3 tx_lp_en. + * [4] clk chan power down. this bit is also used as the power down + * of the whole MIPI_DSI_PHY. + * [3] chan3 power down. + * [2] chan2 power down. + * [1] chan1 power down. + * [0] chan0 power down. + */ +#define MIPI_DSI_CHAN_CTRL 0x4 + +/* [24] rx turn watch dog triggered. + * [23] rx esc watchdog triggered. + * [22] mbias ready. + * [21] txclkesc synced and ready. + * [20:17] clk lane state. {mbias_ready, tx_stop, tx_ulps, tx_hs_active} + * [16:13] chan3 state{0, tx_stop, tx_ulps, tx_hs_active} + * [12:9] chan2 state.{0, tx_stop, tx_ulps, tx_hs_active} + * [8:5] chan1 state. {0, tx_stop, tx_ulps, tx_hs_active} + * [4:0] chan0 state. {TX_STOP, tx_ULPS, hs_active, direction, rxulpsesc} + */ +#define MIPI_DSI_CHAN_STS 0x8 + +/* [31:24] TCLK_PREPARE. + * [23:16] TCLK_ZERO. + * [15:8] TCLK_POST. + * [7:0] TCLK_TRAIL. + */ +#define MIPI_DSI_CLK_TIM 0xc + +/* [31:24] THS_PREPARE. + * [23:16] THS_ZERO. + * [15:8] THS_TRAIL. + * [7:0] THS_EXIT. + */ +#define MIPI_DSI_HS_TIM 0x10 + +/* [31:24] tTA_GET. + * [23:16] tTA_GO. + * [15:8] tTA_SURE. + * [7:0] tLPX. + */ +#define MIPI_DSI_LP_TIM 0x14 + +/* wait time to MIPI DIS analog ready. */ +#define MIPI_DSI_ANA_UP_TIM 0x18 + +/* TINIT. */ +#define MIPI_DSI_INIT_TIM 0x1c + +/* TWAKEUP. */ +#define MIPI_DSI_WAKEUP_TIM 0x20 + +/* when in RxULPS check state, after the the logic enable the analog, + * how long we should wait to check the lP state . + */ +#define MIPI_DSI_LPOK_TIM 0x24 + +/* Watchdog for RX low power state no finished. */ +#define MIPI_DSI_LP_WCHDOG 0x28 + +/* tMBIAS, after send power up signals to analog, + * how long we should wait for analog powered up. + */ +#define MIPI_DSI_ANA_CTRL 0x2c + +/* [31:8] reserved for future. + * [7:0] tCLK_PRE. + */ +#define MIPI_DSI_CLK_TIM1 0x30 + +/* watchdog for turn around waiting time. */ +#define MIPI_DSI_TURN_WCHDOG 0x34 + +/* When in RxULPS state, how frequency we should to check + * if the TX side out of ULPS state. + */ +#define MIPI_DSI_ULPS_CHECK 0x38 +#define MIPI_DSI_TEST_CTRL0 0x3c +#define MIPI_DSI_TEST_CTRL1 0x40 + +struct phy_meson_axg_mipi_dphy_priv { + struct device *dev; + struct regmap *regmap; + struct clk *clk; + struct reset_control *reset; + struct phy *analog; + struct phy_configure_opts_mipi_dphy config; +}; + +static const struct regmap_config phy_meson_axg_mipi_dphy_regmap_conf = { + .reg_bits = 8, + .val_bits = 32, + .reg_stride = 4, + .max_register = MIPI_DSI_TEST_CTRL1, +}; + +static int phy_meson_axg_mipi_dphy_init(struct phy *phy) +{ + struct phy_meson_axg_mipi_dphy_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = phy_init(priv->analog); + if (ret) + return ret; + + ret = reset_control_reset(priv->reset); + if (ret) + return ret; + + return 0; +} + +static int phy_meson_axg_mipi_dphy_configure(struct phy *phy, + union phy_configure_opts *opts) +{ + struct phy_meson_axg_mipi_dphy_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = phy_mipi_dphy_config_validate(&opts->mipi_dphy); + if (ret) + return ret; + + ret = phy_configure(priv->analog, opts); + if (ret) + return ret; + + memcpy(&priv->config, opts, sizeof(priv->config)); + + return 0; +} + +static int phy_meson_axg_mipi_dphy_power_on(struct phy *phy) +{ + struct phy_meson_axg_mipi_dphy_priv *priv = phy_get_drvdata(phy); + int ret; + unsigned long temp; + + ret = phy_power_on(priv->analog); + if (ret) + return ret; + + /* enable phy clock */ + regmap_write(priv->regmap, MIPI_DSI_PHY_CTRL, 0x1); + regmap_write(priv->regmap, MIPI_DSI_PHY_CTRL, + BIT(0) | /* enable the DSI PLL clock . */ + BIT(7) | /* enable pll clock which connected to DDR clock path */ + BIT(8)); /* enable the clock divider counter */ + + /* enable the divider clock out */ + regmap_update_bits(priv->regmap, MIPI_DSI_PHY_CTRL, BIT(9), BIT(9)); + + /* enable the byte clock generation. */ + regmap_update_bits(priv->regmap, MIPI_DSI_PHY_CTRL, BIT(12), BIT(12)); + regmap_update_bits(priv->regmap, MIPI_DSI_PHY_CTRL, BIT(31), BIT(31)); + regmap_update_bits(priv->regmap, MIPI_DSI_PHY_CTRL, BIT(31), 0); + + /* Calculate lanebyteclk period in ps */ + temp = (1000000 * 100) / (priv->config.hs_clk_rate / 1000); + temp = temp * 8 * 10; + + regmap_write(priv->regmap, MIPI_DSI_CLK_TIM, + DIV_ROUND_UP(priv->config.clk_trail, temp) | + (DIV_ROUND_UP(priv->config.clk_post + + priv->config.hs_trail, temp) << 8) | + (DIV_ROUND_UP(priv->config.clk_zero, temp) << 16) | + (DIV_ROUND_UP(priv->config.clk_prepare, temp) << 24)); + regmap_write(priv->regmap, MIPI_DSI_CLK_TIM1, + DIV_ROUND_UP(priv->config.clk_pre, temp)); + + regmap_write(priv->regmap, MIPI_DSI_HS_TIM, + DIV_ROUND_UP(priv->config.hs_exit, temp) | + (DIV_ROUND_UP(priv->config.hs_trail, temp) << 8) | + (DIV_ROUND_UP(priv->config.hs_zero, temp) << 16) | + (DIV_ROUND_UP(priv->config.hs_prepare, temp) << 24)); + + regmap_write(priv->regmap, MIPI_DSI_LP_TIM, + DIV_ROUND_UP(priv->config.lpx, temp) | + (DIV_ROUND_UP(priv->config.ta_sure, temp) << 8) | + (DIV_ROUND_UP(priv->config.ta_go, temp) << 16) | + (DIV_ROUND_UP(priv->config.ta_get, temp) << 24)); + + regmap_write(priv->regmap, MIPI_DSI_ANA_UP_TIM, 0x0100); + regmap_write(priv->regmap, MIPI_DSI_INIT_TIM, + DIV_ROUND_UP(priv->config.init * NSEC_PER_MSEC, temp)); + regmap_write(priv->regmap, MIPI_DSI_WAKEUP_TIM, + DIV_ROUND_UP(priv->config.wakeup * NSEC_PER_MSEC, temp)); + regmap_write(priv->regmap, MIPI_DSI_LPOK_TIM, 0x7C); + regmap_write(priv->regmap, MIPI_DSI_ULPS_CHECK, 0x927C); + regmap_write(priv->regmap, MIPI_DSI_LP_WCHDOG, 0x1000); + regmap_write(priv->regmap, MIPI_DSI_TURN_WCHDOG, 0x1000); + + /* Powerup the analog circuit */ + switch (priv->config.lanes) { + case 1: + regmap_write(priv->regmap, MIPI_DSI_CHAN_CTRL, 0xe); + break; + case 2: + regmap_write(priv->regmap, MIPI_DSI_CHAN_CTRL, 0xc); + break; + case 3: + regmap_write(priv->regmap, MIPI_DSI_CHAN_CTRL, 0x8); + break; + case 4: + default: + regmap_write(priv->regmap, MIPI_DSI_CHAN_CTRL, 0); + break; + } + + /* Trigger a sync active for esc_clk */ + regmap_update_bits(priv->regmap, MIPI_DSI_PHY_CTRL, BIT(1), BIT(1)); + + return 0; +} + +static int phy_meson_axg_mipi_dphy_power_off(struct phy *phy) +{ + struct phy_meson_axg_mipi_dphy_priv *priv = phy_get_drvdata(phy); + + regmap_write(priv->regmap, MIPI_DSI_CHAN_CTRL, 0xf); + regmap_write(priv->regmap, MIPI_DSI_PHY_CTRL, BIT(31)); + + phy_power_off(priv->analog); + + return 0; +} + +static int phy_meson_axg_mipi_dphy_exit(struct phy *phy) +{ + struct phy_meson_axg_mipi_dphy_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = phy_exit(priv->analog); + if (ret) + return ret; + + return reset_control_reset(priv->reset); +} + +static const struct phy_ops phy_meson_axg_mipi_dphy_ops = { + .configure = phy_meson_axg_mipi_dphy_configure, + .init = phy_meson_axg_mipi_dphy_init, + .exit = phy_meson_axg_mipi_dphy_exit, + .power_on = phy_meson_axg_mipi_dphy_power_on, + .power_off = phy_meson_axg_mipi_dphy_power_off, + .owner = THIS_MODULE, +}; + +static int phy_meson_axg_mipi_dphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + struct resource *res; + struct phy_meson_axg_mipi_dphy_priv *priv; + struct phy *phy; + void __iomem *base; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + platform_set_drvdata(pdev, priv); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + priv->regmap = devm_regmap_init_mmio(dev, base, + &phy_meson_axg_mipi_dphy_regmap_conf); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + priv->clk = devm_clk_get(dev, "pclk"); + if (IS_ERR(priv->clk)) + return PTR_ERR(priv->clk); + + priv->reset = devm_reset_control_get(dev, "phy"); + if (IS_ERR(priv->reset)) + return PTR_ERR(priv->reset); + + priv->analog = devm_phy_get(dev, "analog"); + if (IS_ERR(priv->analog)) + return PTR_ERR(priv->analog); + + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; + + ret = reset_control_deassert(priv->reset); + if (ret) + return ret; + + phy = devm_phy_create(dev, NULL, &phy_meson_axg_mipi_dphy_ops); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to create PHY\n"); + + return ret; + } + + phy_set_drvdata(phy, priv); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id phy_meson_axg_mipi_dphy_of_match[] = { + { .compatible = "amlogic,axg-mipi-dphy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, phy_meson_axg_mipi_dphy_of_match); + +static struct platform_driver phy_meson_axg_mipi_dphy_driver = { + .probe = phy_meson_axg_mipi_dphy_probe, + .driver = { + .name = "phy-meson-axg-mipi-dphy", + .of_match_table = phy_meson_axg_mipi_dphy_of_match, + }, +}; +module_platform_driver(phy_meson_axg_mipi_dphy_driver); + +MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>"); +MODULE_DESCRIPTION("Meson AXG MIPI DPHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c index 1431cbf885e1..1027ece6ca12 100644 --- a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c +++ b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c @@ -4,9 +4,13 @@ * * Copyright (C) 2019 Remi Pommarel <repk@triplefau.lt> */ +#include <linux/bitfield.h> +#include <linux/bitops.h> #include <linux/module.h> #include <linux/phy/phy.h> #include <linux/regmap.h> +#include <linux/delay.h> +#include <linux/mfd/syscon.h> #include <linux/platform_device.h> #include <dt-bindings/phy/phy.h> @@ -14,10 +18,10 @@ #define HHI_MIPI_CNTL0_COMMON_BLOCK GENMASK(31, 28) #define HHI_MIPI_CNTL0_ENABLE BIT(29) #define HHI_MIPI_CNTL0_BANDGAP BIT(26) -#define HHI_MIPI_CNTL0_DECODE_TO_RTERM GENMASK(15, 12) -#define HHI_MIPI_CNTL0_OUTPUT_EN BIT(3) +#define HHI_MIPI_CNTL0_DIF_REF_CTL1 GENMASK(25, 16) +#define HHI_MIPI_CNTL0_DIF_REF_CTL0 GENMASK(15, 0) -#define HHI_MIPI_CNTL1 0x01 +#define HHI_MIPI_CNTL1 0x04 #define HHI_MIPI_CNTL1_CH0_CML_PDR_EN BIT(12) #define HHI_MIPI_CNTL1_LP_ABILITY GENMASK(5, 4) #define HHI_MIPI_CNTL1_LP_RESISTER BIT(3) @@ -25,100 +29,169 @@ #define HHI_MIPI_CNTL1_INPUT_SEL BIT(1) #define HHI_MIPI_CNTL1_PRBS7_EN BIT(0) -#define HHI_MIPI_CNTL2 0x02 +#define HHI_MIPI_CNTL2 0x08 #define HHI_MIPI_CNTL2_CH_PU GENMASK(31, 25) #define HHI_MIPI_CNTL2_CH_CTL GENMASK(24, 19) #define HHI_MIPI_CNTL2_CH0_DIGDR_EN BIT(18) #define HHI_MIPI_CNTL2_CH_DIGDR_EN BIT(17) #define HHI_MIPI_CNTL2_LPULPS_EN BIT(16) -#define HHI_MIPI_CNTL2_CH_EN(n) BIT(15 - (n)) +#define HHI_MIPI_CNTL2_CH_EN GENMASK(15, 11) #define HHI_MIPI_CNTL2_CH0_LP_CTL GENMASK(10, 1) +#define DSI_LANE_0 BIT(4) +#define DSI_LANE_1 BIT(3) +#define DSI_LANE_CLK BIT(2) +#define DSI_LANE_2 BIT(1) +#define DSI_LANE_3 BIT(0) + struct phy_axg_mipi_pcie_analog_priv { struct phy *phy; - unsigned int mode; struct regmap *regmap; + bool dsi_configured; + bool dsi_enabled; + bool powered; + struct phy_configure_opts_mipi_dphy config; }; -static const struct regmap_config phy_axg_mipi_pcie_analog_regmap_conf = { - .reg_bits = 8, - .val_bits = 32, - .reg_stride = 4, - .max_register = HHI_MIPI_CNTL2, -}; +static void phy_bandgap_enable(struct phy_axg_mipi_pcie_analog_priv *priv) +{ + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, + HHI_MIPI_CNTL0_BANDGAP, HHI_MIPI_CNTL0_BANDGAP); -static int phy_axg_mipi_pcie_analog_power_on(struct phy *phy) + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, + HHI_MIPI_CNTL0_ENABLE, HHI_MIPI_CNTL0_ENABLE); +} + +static void phy_bandgap_disable(struct phy_axg_mipi_pcie_analog_priv *priv) { - struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy); + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, + HHI_MIPI_CNTL0_BANDGAP, 0); + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, + HHI_MIPI_CNTL0_ENABLE, 0); +} - /* MIPI not supported yet */ - if (priv->mode != PHY_TYPE_PCIE) - return -EINVAL; +static void phy_dsi_analog_enable(struct phy_axg_mipi_pcie_analog_priv *priv) +{ + u32 reg; regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, - HHI_MIPI_CNTL0_BANDGAP, HHI_MIPI_CNTL0_BANDGAP); + HHI_MIPI_CNTL0_DIF_REF_CTL1, + FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL1, 0x1b8)); + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, + BIT(31), BIT(31)); + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, + HHI_MIPI_CNTL0_DIF_REF_CTL0, + FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL0, 0x8)); + + regmap_write(priv->regmap, HHI_MIPI_CNTL1, 0x001e); + + regmap_write(priv->regmap, HHI_MIPI_CNTL2, + (0x26e0 << 16) | (0x459 << 0)); + + reg = DSI_LANE_CLK; + switch (priv->config.lanes) { + case 4: + reg |= DSI_LANE_3; + fallthrough; + case 3: + reg |= DSI_LANE_2; + fallthrough; + case 2: + reg |= DSI_LANE_1; + fallthrough; + case 1: + reg |= DSI_LANE_0; + break; + default: + reg = 0; + } + + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL2, + HHI_MIPI_CNTL2_CH_EN, + FIELD_PREP(HHI_MIPI_CNTL2_CH_EN, reg)); + + priv->dsi_enabled = true; +} +static void phy_dsi_analog_disable(struct phy_axg_mipi_pcie_analog_priv *priv) +{ regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, - HHI_MIPI_CNTL0_ENABLE, HHI_MIPI_CNTL0_ENABLE); - return 0; + HHI_MIPI_CNTL0_DIF_REF_CTL1, + FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL1, 0)); + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, BIT(31), 0); + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, + HHI_MIPI_CNTL0_DIF_REF_CTL1, 0); + + regmap_write(priv->regmap, HHI_MIPI_CNTL1, 0x6); + + regmap_write(priv->regmap, HHI_MIPI_CNTL2, 0x00200000); + + priv->dsi_enabled = false; } -static int phy_axg_mipi_pcie_analog_power_off(struct phy *phy) +static int phy_axg_mipi_pcie_analog_configure(struct phy *phy, + union phy_configure_opts *opts) { struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy); + int ret; - /* MIPI not supported yet */ - if (priv->mode != PHY_TYPE_PCIE) - return -EINVAL; + ret = phy_mipi_dphy_config_validate(&opts->mipi_dphy); + if (ret) + return ret; + + memcpy(&priv->config, opts, sizeof(priv->config)); + + priv->dsi_configured = true; + + /* If PHY was already powered on, setup the DSI analog part */ + if (priv->powered) { + /* If reconfiguring, disable & reconfigure */ + if (priv->dsi_enabled) + phy_dsi_analog_disable(priv); + + usleep_range(100, 200); + + phy_dsi_analog_enable(priv); + } - regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, - HHI_MIPI_CNTL0_BANDGAP, 0); - regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, - HHI_MIPI_CNTL0_ENABLE, 0); return 0; } -static int phy_axg_mipi_pcie_analog_init(struct phy *phy) +static int phy_axg_mipi_pcie_analog_power_on(struct phy *phy) { + struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy); + + phy_bandgap_enable(priv); + + if (priv->dsi_configured) + phy_dsi_analog_enable(priv); + + priv->powered = true; + return 0; } -static int phy_axg_mipi_pcie_analog_exit(struct phy *phy) +static int phy_axg_mipi_pcie_analog_power_off(struct phy *phy) { + struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy); + + phy_bandgap_disable(priv); + + if (priv->dsi_enabled) + phy_dsi_analog_disable(priv); + + priv->powered = false; + return 0; } static const struct phy_ops phy_axg_mipi_pcie_analog_ops = { - .init = phy_axg_mipi_pcie_analog_init, - .exit = phy_axg_mipi_pcie_analog_exit, + .configure = phy_axg_mipi_pcie_analog_configure, .power_on = phy_axg_mipi_pcie_analog_power_on, .power_off = phy_axg_mipi_pcie_analog_power_off, .owner = THIS_MODULE, }; -static struct phy *phy_axg_mipi_pcie_analog_xlate(struct device *dev, - struct of_phandle_args *args) -{ - struct phy_axg_mipi_pcie_analog_priv *priv = dev_get_drvdata(dev); - unsigned int mode; - - if (args->args_count != 1) { - dev_err(dev, "invalid number of arguments\n"); - return ERR_PTR(-EINVAL); - } - - mode = args->args[0]; - - /* MIPI mode is not supported yet */ - if (mode != PHY_TYPE_PCIE) { - dev_err(dev, "invalid phy mode select argument\n"); - return ERR_PTR(-EINVAL); - } - - priv->mode = mode; - return priv->phy; -} - static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev) { struct phy_provider *phy; @@ -126,27 +199,20 @@ static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev) struct phy_axg_mipi_pcie_analog_priv *priv; struct device_node *np = dev->of_node; struct regmap *map; - struct resource *res; - void __iomem *base; int ret; priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) { - dev_err(dev, "failed to get regmap base\n"); - return PTR_ERR(base); - } - - map = devm_regmap_init_mmio(dev, base, - &phy_axg_mipi_pcie_analog_regmap_conf); + /* Get the hhi system controller node */ + map = syscon_node_to_regmap(of_get_parent(dev->of_node)); if (IS_ERR(map)) { - dev_err(dev, "failed to get HHI regmap\n"); + dev_err(dev, + "failed to get HHI regmap\n"); return PTR_ERR(map); } + priv->regmap = map; priv->phy = devm_phy_create(dev, np, &phy_axg_mipi_pcie_analog_ops); @@ -160,8 +226,7 @@ static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev) phy_set_drvdata(priv->phy, priv); dev_set_drvdata(dev, priv); - phy = devm_of_phy_provider_register(dev, - phy_axg_mipi_pcie_analog_xlate); + phy = devm_of_phy_provider_register(dev, of_phy_simple_xlate); return PTR_ERR_OR_ZERO(phy); } diff --git a/drivers/phy/amlogic/phy-meson-axg-pcie.c b/drivers/phy/amlogic/phy-meson-axg-pcie.c index 377ed0dcd0d9..2299bab38e05 100644 --- a/drivers/phy/amlogic/phy-meson-axg-pcie.c +++ b/drivers/phy/amlogic/phy-meson-axg-pcie.c @@ -129,7 +129,6 @@ static int phy_axg_pcie_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct phy_axg_pcie_priv *priv; struct device_node *np = dev->of_node; - struct resource *res; void __iomem *base; int ret; @@ -145,8 +144,7 @@ static int phy_axg_pcie_probe(struct platform_device *pdev) return ret; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); + base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) return PTR_ERR(base); @@ -155,7 +153,7 @@ static int phy_axg_pcie_probe(struct platform_device *pdev) if (IS_ERR(priv->regmap)) return PTR_ERR(priv->regmap); - priv->reset = devm_reset_control_array_get(dev, false, false); + priv->reset = devm_reset_control_array_get_exclusive(dev); if (IS_ERR(priv->reset)) return PTR_ERR(priv->reset); diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb2.c b/drivers/phy/amlogic/phy-meson-g12a-usb2.c index b26e30e1afaf..9d1efa0d9394 100644 --- a/drivers/phy/amlogic/phy-meson-g12a-usb2.c +++ b/drivers/phy/amlogic/phy-meson-g12a-usb2.c @@ -292,7 +292,6 @@ static int phy_meson_g12a_usb2_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct phy_provider *phy_provider; - struct resource *res; struct phy_meson_g12a_usb2_priv *priv; struct phy *phy; void __iomem *base; @@ -305,8 +304,7 @@ static int phy_meson_g12a_usb2_probe(struct platform_device *pdev) priv->dev = dev; platform_set_drvdata(pdev, priv); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); + base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) return PTR_ERR(base); diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c index 08e322789e59..5b471ab80fe2 100644 --- a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c +++ b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c @@ -386,7 +386,6 @@ static int phy_g12a_usb3_pcie_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; struct phy_g12a_usb3_pcie_priv *priv; - struct resource *res; struct phy_provider *phy_provider; void __iomem *base; int ret; @@ -395,8 +394,7 @@ static int phy_g12a_usb3_pcie_probe(struct platform_device *pdev) if (!priv) return -ENOMEM; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); + base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) return PTR_ERR(base); @@ -418,7 +416,7 @@ static int phy_g12a_usb3_pcie_probe(struct platform_device *pdev) if (ret) goto err_disable_clk_ref; - priv->reset = devm_reset_control_array_get(dev, false, false); + priv->reset = devm_reset_control_array_get_exclusive(dev); if (IS_ERR(priv->reset)) return PTR_ERR(priv->reset); diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c index 43ec9bf24abf..2b3c0d730f20 100644 --- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c +++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c @@ -158,7 +158,8 @@ static int phy_meson_gxl_usb2_set_mode(struct phy *phy, U2P_R0_DM_PULLDOWN); regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DP_PULLDOWN, U2P_R0_DP_PULLDOWN); - regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP, 0); + regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP, + U2P_R0_ID_PULLUP); break; case PHY_MODE_USB_DEVICE: @@ -230,7 +231,6 @@ static int phy_meson_gxl_usb2_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct phy_provider *phy_provider; - struct resource *res; struct phy_meson_gxl_usb2_priv *priv; struct phy *phy; void __iomem *base; @@ -242,8 +242,7 @@ static int phy_meson_gxl_usb2_probe(struct platform_device *pdev) platform_set_drvdata(pdev, priv); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); + base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) return PTR_ERR(base); |