diff options
Diffstat (limited to 'drivers/phy/broadcom')
| -rw-r--r-- | drivers/phy/broadcom/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/phy/broadcom/Makefile | 2 | ||||
| -rw-r--r-- | drivers/phy/broadcom/phy-brcm-sata.c | 120 | ||||
| -rw-r--r-- | drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c | 414 | ||||
| -rw-r--r-- | drivers/phy/broadcom/phy-brcm-usb-init.c | 226 | ||||
| -rw-r--r-- | drivers/phy/broadcom/phy-brcm-usb-init.h | 148 | ||||
| -rw-r--r-- | drivers/phy/broadcom/phy-brcm-usb.c | 269 |
7 files changed, 1009 insertions, 174 deletions
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig index d3d983c128ea..b29f11c19155 100644 --- a/drivers/phy/broadcom/Kconfig +++ b/drivers/phy/broadcom/Kconfig @@ -50,7 +50,7 @@ config PHY_BCM_NS_USB3 config PHY_NS2_PCIE tristate "Broadcom Northstar2 PCIe PHY driver" - depends on OF && MDIO_BUS_MUX_BCM_IPROC + depends on (OF && MDIO_BUS_MUX_BCM_IPROC) || (COMPILE_TEST && MDIO_BUS) select GENERIC_PHY default ARCH_BCM_IPROC help @@ -83,7 +83,7 @@ config PHY_BRCM_SATA config PHY_BRCM_USB tristate "Broadcom STB USB PHY driver" - depends on ARCH_BRCMSTB + depends on ARCH_BRCMSTB || COMPILE_TEST depends on OF select GENERIC_PHY select SOC_BRCMSTB diff --git a/drivers/phy/broadcom/Makefile b/drivers/phy/broadcom/Makefile index f453c7d3ffff..c78de546135c 100644 --- a/drivers/phy/broadcom/Makefile +++ b/drivers/phy/broadcom/Makefile @@ -8,7 +8,7 @@ obj-$(CONFIG_PHY_NS2_USB_DRD) += phy-bcm-ns2-usbdrd.o obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o obj-$(CONFIG_PHY_BRCM_USB) += phy-brcm-usb-dvr.o -phy-brcm-usb-dvr-objs := phy-brcm-usb.o phy-brcm-usb-init.o +phy-brcm-usb-dvr-objs := phy-brcm-usb.o phy-brcm-usb-init.o phy-brcm-usb-init-synopsys.o obj-$(CONFIG_PHY_BCM_SR_PCIE) += phy-bcm-sr-pcie.o obj-$(CONFIG_PHY_BCM_SR_USB) += phy-bcm-sr-usb.o diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c index 50ac75bbb0c9..4710cfcc3037 100644 --- a/drivers/phy/broadcom/phy-brcm-sata.c +++ b/drivers/phy/broadcom/phy-brcm-sata.c @@ -33,6 +33,7 @@ #define SATA_PHY_CTRL_REG_28NM_SPACE_SIZE 0x8 enum brcm_sata_phy_version { + BRCM_SATA_PHY_STB_16NM, BRCM_SATA_PHY_STB_28NM, BRCM_SATA_PHY_STB_40NM, BRCM_SATA_PHY_IPROC_NS2, @@ -104,10 +105,13 @@ enum sata_phy_regs { PLL1_ACTRL5 = 0x85, PLL1_ACTRL6 = 0x86, PLL1_ACTRL7 = 0x87, + PLL1_ACTRL8 = 0x88, TX_REG_BANK = 0x070, TX_ACTRL0 = 0x80, TX_ACTRL0_TXPOL_FLIP = BIT(6), + TX_ACTRL5 = 0x85, + TX_ACTRL5_SSC_EN = BIT(11), AEQRX_REG_BANK_0 = 0xd0, AEQ_CONTROL1 = 0x81, @@ -116,6 +120,7 @@ enum sata_phy_regs { AEQ_FRC_EQ = 0x83, AEQ_FRC_EQ_FORCE = BIT(0), AEQ_FRC_EQ_FORCE_VAL = BIT(1), + AEQ_RFZ_FRC_VAL = BIT(8), AEQRX_REG_BANK_1 = 0xe0, AEQRX_SLCAL0_CTRL0 = 0x82, AEQRX_SLCAL1_CTRL0 = 0x86, @@ -152,7 +157,28 @@ enum sata_phy_regs { TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff, RXPMD_REG_BANK = 0x1c0, + RXPMD_RX_CDR_CONTROL1 = 0x81, + RXPMD_RX_PPM_VAL_MASK = 0x1ff, + RXPMD_RXPMD_EN_FRC = BIT(12), + RXPMD_RXPMD_EN_FRC_VAL = BIT(13), + RXPMD_RX_CDR_CDR_PROP_BW = 0x82, + RXPMD_G_CDR_PROP_BW_MASK = 0x7, + RXPMD_G1_CDR_PROP_BW_SHIFT = 0, + RXPMD_G2_CDR_PROP_BW_SHIFT = 3, + RXPMD_G3_CDR_PROB_BW_SHIFT = 6, + RXPMD_RX_CDR_CDR_ACQ_INTEG_BW = 0x83, + RXPMD_G_CDR_ACQ_INT_BW_MASK = 0x7, + RXPMD_G1_CDR_ACQ_INT_BW_SHIFT = 0, + RXPMD_G2_CDR_ACQ_INT_BW_SHIFT = 3, + RXPMD_G3_CDR_ACQ_INT_BW_SHIFT = 6, + RXPMD_RX_CDR_CDR_LOCK_INTEG_BW = 0x84, + RXPMD_G_CDR_LOCK_INT_BW_MASK = 0x7, + RXPMD_G1_CDR_LOCK_INT_BW_SHIFT = 0, + RXPMD_G2_CDR_LOCK_INT_BW_SHIFT = 3, + RXPMD_G3_CDR_LOCK_INT_BW_SHIFT = 6, RXPMD_RX_FREQ_MON_CONTROL1 = 0x87, + RXPMD_MON_CORRECT_EN = BIT(8), + RXPMD_MON_MARGIN_VAL_MASK = 0xff, }; enum sata_phy_ctrl_regs { @@ -166,6 +192,7 @@ static inline void __iomem *brcm_sata_pcb_base(struct brcm_sata_port *port) u32 size = 0; switch (priv->version) { + case BRCM_SATA_PHY_STB_16NM: case BRCM_SATA_PHY_STB_28NM: case BRCM_SATA_PHY_IPROC_NS2: case BRCM_SATA_PHY_DSL_28NM: @@ -287,6 +314,94 @@ static int brcm_stb_sata_init(struct brcm_sata_port *port) return brcm_stb_sata_rxaeq_init(port); } +static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port) +{ + void __iomem *base = brcm_sata_pcb_base(port); + u32 tmp, value; + + /* Reduce CP tail current to 1/16th of its default value */ + brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0x141); + + /* Turn off CP tail current boost */ + brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL8, 0, 0xc006); + + /* Set a specific AEQ equalizer value */ + tmp = AEQ_FRC_EQ_FORCE_VAL | AEQ_FRC_EQ_FORCE; + brcm_sata_phy_wr(base, AEQRX_REG_BANK_0, AEQ_FRC_EQ, + ~(tmp | AEQ_RFZ_FRC_VAL | + AEQ_FRC_EQ_VAL_MASK << AEQ_FRC_EQ_VAL_SHIFT), + tmp | 32 << AEQ_FRC_EQ_VAL_SHIFT); + + /* Set RX PPM val center frequency */ + if (port->ssc_en) + value = 0x52; + else + value = 0; + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CONTROL1, + ~RXPMD_RX_PPM_VAL_MASK, value); + + /* Set proportional loop bandwith Gen1/2/3 */ + tmp = RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G1_CDR_PROP_BW_SHIFT | + RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G2_CDR_PROP_BW_SHIFT | + RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G3_CDR_PROB_BW_SHIFT; + if (port->ssc_en) + value = 2 << RXPMD_G1_CDR_PROP_BW_SHIFT | + 2 << RXPMD_G2_CDR_PROP_BW_SHIFT | + 2 << RXPMD_G3_CDR_PROB_BW_SHIFT; + else + value = 1 << RXPMD_G1_CDR_PROP_BW_SHIFT | + 1 << RXPMD_G2_CDR_PROP_BW_SHIFT | + 1 << RXPMD_G3_CDR_PROB_BW_SHIFT; + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_PROP_BW, ~tmp, + value); + + /* Set CDR integral loop acquisition bandwidth for Gen1/2/3 */ + tmp = RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G1_CDR_ACQ_INT_BW_SHIFT | + RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G2_CDR_ACQ_INT_BW_SHIFT | + RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G3_CDR_ACQ_INT_BW_SHIFT; + if (port->ssc_en) + value = 1 << RXPMD_G1_CDR_ACQ_INT_BW_SHIFT | + 1 << RXPMD_G2_CDR_ACQ_INT_BW_SHIFT | + 1 << RXPMD_G3_CDR_ACQ_INT_BW_SHIFT; + else + value = 0; + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_ACQ_INTEG_BW, + ~tmp, value); + + /* Set CDR integral loop locking bandwidth to 1 for Gen 1/2/3 */ + tmp = RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G1_CDR_LOCK_INT_BW_SHIFT | + RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G2_CDR_LOCK_INT_BW_SHIFT | + RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G3_CDR_LOCK_INT_BW_SHIFT; + if (port->ssc_en) + value = 1 << RXPMD_G1_CDR_LOCK_INT_BW_SHIFT | + 1 << RXPMD_G2_CDR_LOCK_INT_BW_SHIFT | + 1 << RXPMD_G3_CDR_LOCK_INT_BW_SHIFT; + else + value = 0; + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_LOCK_INTEG_BW, + ~tmp, value); + + /* Set no guard band and clamp CDR */ + tmp = RXPMD_MON_CORRECT_EN | RXPMD_MON_MARGIN_VAL_MASK; + if (port->ssc_en) + value = 0x51; + else + value = 0; + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1, + ~tmp, RXPMD_MON_CORRECT_EN | value); + + /* Turn on/off SSC */ + brcm_sata_phy_wr(base, TX_REG_BANK, TX_ACTRL5, ~TX_ACTRL5_SSC_EN, + port->ssc_en ? TX_ACTRL5_SSC_EN : 0); + + return 0; +} + +static int brcm_stb_sata_16nm_init(struct brcm_sata_port *port) +{ + return brcm_stb_sata_16nm_ssc_init(port); +} + /* NS2 SATA PLL1 defaults were characterized by H/W group */ #define NS2_PLL1_ACTRL2_MAGIC 0x1df8 #define NS2_PLL1_ACTRL3_MAGIC 0x2b00 @@ -544,6 +659,9 @@ static int brcm_sata_phy_init(struct phy *phy) struct brcm_sata_port *port = phy_get_drvdata(phy); switch (port->phy_priv->version) { + case BRCM_SATA_PHY_STB_16NM: + rc = brcm_stb_sata_16nm_init(port); + break; case BRCM_SATA_PHY_STB_28NM: case BRCM_SATA_PHY_STB_40NM: rc = brcm_stb_sata_init(port); @@ -601,6 +719,8 @@ static const struct phy_ops phy_ops = { }; static const struct of_device_id brcm_sata_phy_of_match[] = { + { .compatible = "brcm,bcm7216-sata-phy", + .data = (void *)BRCM_SATA_PHY_STB_16NM }, { .compatible = "brcm,bcm7445-sata-phy", .data = (void *)BRCM_SATA_PHY_STB_28NM }, { .compatible = "brcm,bcm7425-sata-phy", diff --git a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c new file mode 100644 index 000000000000..456dc4a100c2 --- /dev/null +++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c @@ -0,0 +1,414 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018, Broadcom */ + +/* + * This module contains USB PHY initialization for power up and S3 resume + * for newer Synopsys based USB hardware first used on the bcm7216. + */ + +#include <linux/delay.h> +#include <linux/io.h> + +#include <linux/soc/brcmstb/brcmstb.h> +#include "phy-brcm-usb-init.h" + +#define PHY_LOCK_TIMEOUT_MS 200 + +/* Register definitions for syscon piarbctl registers */ +#define PIARBCTL_CAM 0x00 +#define PIARBCTL_SPLITTER 0x04 +#define PIARBCTL_MISC 0x08 +#define PIARBCTL_MISC_SECURE_MASK 0x80000000 +#define PIARBCTL_MISC_USB_SELECT_MASK 0x40000000 +#define PIARBCTL_MISC_USB_4G_SDRAM_MASK 0x20000000 +#define PIARBCTL_MISC_USB_PRIORITY_MASK 0x000f0000 +#define PIARBCTL_MISC_USB_MEM_PAGE_MASK 0x0000f000 +#define PIARBCTL_MISC_CAM1_MEM_PAGE_MASK 0x00000f00 +#define PIARBCTL_MISC_CAM0_MEM_PAGE_MASK 0x000000f0 +#define PIARBCTL_MISC_SATA_PRIORITY_MASK 0x0000000f + +#define PIARBCTL_MISC_USB_ONLY_MASK \ + (PIARBCTL_MISC_USB_SELECT_MASK | \ + PIARBCTL_MISC_USB_4G_SDRAM_MASK | \ + PIARBCTL_MISC_USB_PRIORITY_MASK | \ + PIARBCTL_MISC_USB_MEM_PAGE_MASK) + +/* Register definitions for the USB CTRL block */ +#define USB_CTRL_SETUP 0x00 +#define USB_CTRL_SETUP_STRAP_IPP_SEL_MASK 0x02000000 +#define USB_CTRL_SETUP_SCB2_EN_MASK 0x00008000 +#define USB_CTRL_SETUP_tca_drv_sel_MASK 0x01000000 +#define USB_CTRL_SETUP_SCB1_EN_MASK 0x00004000 +#define USB_CTRL_SETUP_SOFT_SHUTDOWN_MASK 0x00000200 +#define USB_CTRL_SETUP_IPP_MASK 0x00000020 +#define USB_CTRL_SETUP_IOC_MASK 0x00000010 +#define USB_CTRL_USB_PM 0x04 +#define USB_CTRL_USB_PM_USB_PWRDN_MASK 0x80000000 +#define USB_CTRL_USB_PM_SOFT_RESET_MASK 0x40000000 +#define USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK 0x00800000 +#define USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK 0x00400000 +#define USB_CTRL_USB_PM_STATUS 0x08 +#define USB_CTRL_USB_DEVICE_CTL1 0x10 +#define USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK 0x00000003 +#define USB_CTRL_TEST_PORT_CTL 0x30 +#define USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_MASK 0x000000ff +#define USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_PME_GEN_MASK 0x0000002e +#define USB_CTRL_TP_DIAG1 0x34 +#define USB_CTLR_TP_DIAG1_wake_MASK 0x00000002 +#define USB_CTRL_CTLR_CSHCR 0x50 +#define USB_CTRL_CTLR_CSHCR_ctl_pme_en_MASK 0x00040000 + +/* Register definitions for the USB_PHY block in 7211b0 */ +#define USB_PHY_PLL_CTL 0x00 +#define USB_PHY_PLL_CTL_PLL_RESETB_MASK 0x40000000 +#define USB_PHY_PLL_LDO_CTL 0x08 +#define USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK 0x00000004 +#define USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK 0x00000002 +#define USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK 0x00000001 +#define USB_PHY_UTMI_CTL_1 0x04 +#define USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK 0x00000800 +#define USB_PHY_UTMI_CTL_1_PHY_MODE_MASK 0x0000000c +#define USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT 2 +#define USB_PHY_IDDQ 0x1c +#define USB_PHY_IDDQ_phy_iddq_MASK 0x00000001 +#define USB_PHY_STATUS 0x20 +#define USB_PHY_STATUS_pll_lock_MASK 0x00000001 + +/* Register definitions for the MDIO registers in the DWC2 block of + * the 7211b0. + * NOTE: The PHY's MDIO registers are only accessible through the + * legacy DesignWare USB controller even though it's not being used. + */ +#define USB_GMDIOCSR 0 +#define USB_GMDIOGEN 4 + +/* Register definitions for the BDC EC block in 7211b0 */ +#define BDC_EC_AXIRDA 0x0c +#define BDC_EC_AXIRDA_RTS_MASK 0xf0000000 +#define BDC_EC_AXIRDA_RTS_SHIFT 28 + + +static void usb_mdio_write_7211b0(struct brcm_usb_init_params *params, + uint8_t addr, uint16_t data) +{ + void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO]; + + addr &= 0x1f; /* 5-bit address */ + brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x59020000 | (addr << 18) | data, + usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; +} + +static uint16_t __maybe_unused usb_mdio_read_7211b0( + struct brcm_usb_init_params *params, uint8_t addr) +{ + void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO]; + + addr &= 0x1f; /* 5-bit address */ + brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x69020000 | (addr << 18), usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + return brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & 0xffff; +} + +static void usb2_eye_fix_7211b0(struct brcm_usb_init_params *params) +{ + /* select bank */ + usb_mdio_write_7211b0(params, 0x1f, 0x80a0); + + /* Set the eye */ + usb_mdio_write_7211b0(params, 0x0a, 0xc6a0); +} + +static void xhci_soft_reset(struct brcm_usb_init_params *params, + int on_off) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + /* Assert reset */ + if (on_off) + USB_CTRL_UNSET(ctrl, USB_PM, XHC_SOFT_RESETB); + /* De-assert reset */ + else + USB_CTRL_SET(ctrl, USB_PM, XHC_SOFT_RESETB); +} + +static void usb_init_ipp(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg; + u32 orig_reg; + + pr_debug("%s\n", __func__); + + orig_reg = reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); + if (params->ipp != 2) + /* override ipp strap pin (if it exits) */ + reg &= ~(USB_CTRL_MASK(SETUP, STRAP_IPP_SEL)); + + /* Override the default OC and PP polarity */ + reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC)); + if (params->ioc) + reg |= USB_CTRL_MASK(SETUP, IOC); + if (params->ipp == 1) + reg |= USB_CTRL_MASK(SETUP, IPP); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); + + /* + * If we're changing IPP, make sure power is off long enough + * to turn off any connected devices. + */ + if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP)) + msleep(50); +} + +static void syscon_piarbctl_init(struct regmap *rmap) +{ + /* Switch from legacy USB OTG controller to new STB USB controller */ + regmap_update_bits(rmap, PIARBCTL_MISC, PIARBCTL_MISC_USB_ONLY_MASK, + PIARBCTL_MISC_USB_SELECT_MASK | + PIARBCTL_MISC_USB_4G_SDRAM_MASK); +} + +static void usb_init_common(struct brcm_usb_init_params *params) +{ + u32 reg; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + pr_debug("%s\n", __func__); + + USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN); + /* 1 millisecond - for USB clocks to settle down */ + usleep_range(1000, 2000); + + if (USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE)) { + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE); + reg |= params->mode; + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + } + switch (params->mode) { + case USB_CTLR_MODE_HOST: + USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB); + break; + default: + USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB); + USB_CTRL_SET(ctrl, USB_PM, BDC_SOFT_RESETB); + break; + } +} + +static void usb_wake_enable_7211b0(struct brcm_usb_init_params *params, + bool enable) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + if (enable) + USB_CTRL_SET(ctrl, CTLR_CSHCR, ctl_pme_en); + else + USB_CTRL_UNSET(ctrl, CTLR_CSHCR, ctl_pme_en); +} + +static void usb_init_common_7211b0(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY]; + void __iomem *bdc_ec = params->regs[BRCM_REGS_BDC_EC]; + int timeout_ms = PHY_LOCK_TIMEOUT_MS; + u32 reg; + + if (params->syscon_piarbctl) + syscon_piarbctl_init(params->syscon_piarbctl); + + USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN); + + usb_wake_enable_7211b0(params, false); + if (!params->wake_enabled) { + + /* undo possible suspend settings */ + brcm_usb_writel(0, usb_phy + USB_PHY_IDDQ); + reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL); + reg |= USB_PHY_PLL_CTL_PLL_RESETB_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL); + + /* temporarily enable FSM so PHY comes up properly */ + reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1); + reg |= USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1); + } + + /* Init the PHY */ + reg = USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK | + USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK | + USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_LDO_CTL); + + /* wait for lock */ + while (timeout_ms-- > 0) { + reg = brcm_usb_readl(usb_phy + USB_PHY_STATUS); + if (reg & USB_PHY_STATUS_pll_lock_MASK) + break; + usleep_range(1000, 2000); + } + + /* Set the PHY_MODE */ + reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1); + reg &= ~USB_PHY_UTMI_CTL_1_PHY_MODE_MASK; + reg |= params->mode << USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT; + brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1); + + /* Fix the incorrect default */ + reg = brcm_usb_readl(ctrl + USB_CTRL_SETUP); + reg &= ~USB_CTRL_SETUP_tca_drv_sel_MASK; + brcm_usb_writel(reg, ctrl + USB_CTRL_SETUP); + + usb_init_common(params); + + /* + * The BDC controller will get occasional failures with + * the default "Read Transaction Size" of 6 (1024 bytes). + * Set it to 4 (256 bytes). + */ + if ((params->mode != USB_CTLR_MODE_HOST) && bdc_ec) { + reg = brcm_usb_readl(bdc_ec + BDC_EC_AXIRDA); + reg &= ~BDC_EC_AXIRDA_RTS_MASK; + reg |= (0x4 << BDC_EC_AXIRDA_RTS_SHIFT); + brcm_usb_writel(reg, bdc_ec + BDC_EC_AXIRDA); + } + + /* + * Disable FSM, otherwise the PHY will auto suspend when no + * device is connected and will be reset on resume. + */ + reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1); + reg &= ~USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1); + + usb2_eye_fix_7211b0(params); +} + +static void usb_init_xhci(struct brcm_usb_init_params *params) +{ + pr_debug("%s\n", __func__); + + xhci_soft_reset(params, 0); +} + +static void usb_uninit_common(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + pr_debug("%s\n", __func__); + + USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN); + +} + +static void usb_uninit_common_7211b0(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY]; + u32 reg; + + pr_debug("%s\n", __func__); + + if (params->wake_enabled) { + USB_CTRL_SET(ctrl, TEST_PORT_CTL, TPOUT_SEL_PME_GEN); + usb_wake_enable_7211b0(params, true); + } else { + USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN); + brcm_usb_writel(0, usb_phy + USB_PHY_PLL_LDO_CTL); + reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL); + reg &= ~USB_PHY_PLL_CTL_PLL_RESETB_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL); + brcm_usb_writel(USB_PHY_IDDQ_phy_iddq_MASK, + usb_phy + USB_PHY_IDDQ); + } + +} + +static void usb_uninit_xhci(struct brcm_usb_init_params *params) +{ + + pr_debug("%s\n", __func__); + + if (!params->wake_enabled) + xhci_soft_reset(params, 1); +} + +static int usb_get_dual_select(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg = 0; + + pr_debug("%s\n", __func__); + + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg &= USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE); + return reg; +} + +static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg; + + pr_debug("%s\n", __func__); + + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE); + reg |= mode; + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); +} + +static const struct brcm_usb_init_ops bcm7216_ops = { + .init_ipp = usb_init_ipp, + .init_common = usb_init_common, + .init_xhci = usb_init_xhci, + .uninit_common = usb_uninit_common, + .uninit_xhci = usb_uninit_xhci, + .get_dual_select = usb_get_dual_select, + .set_dual_select = usb_set_dual_select, +}; + +static const struct brcm_usb_init_ops bcm7211b0_ops = { + .init_ipp = usb_init_ipp, + .init_common = usb_init_common_7211b0, + .init_xhci = usb_init_xhci, + .uninit_common = usb_uninit_common_7211b0, + .uninit_xhci = usb_uninit_xhci, + .get_dual_select = usb_get_dual_select, + .set_dual_select = usb_set_dual_select, +}; + +void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params) +{ + + pr_debug("%s\n", __func__); + + params->family_name = "7216"; + params->ops = &bcm7216_ops; +} + +void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params) +{ + + pr_debug("%s\n", __func__); + + params->family_name = "7211"; + params->ops = &bcm7211b0_ops; + params->suspend_with_clocks = true; +} diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.c b/drivers/phy/broadcom/phy-brcm-usb-init.c index 91b5b09589d6..9391ab42a12b 100644 --- a/drivers/phy/broadcom/phy-brcm-usb-init.c +++ b/drivers/phy/broadcom/phy-brcm-usb-init.c @@ -42,6 +42,7 @@ #define USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK 0x80000000 /* option */ #define USB_CTRL_EBRIDGE 0x0c #define USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK 0x00020000 /* option */ +#define USB_CTRL_EBRIDGE_EBR_SCB_SIZE_MASK 0x00000f80 /* option */ #define USB_CTRL_OBRIDGE 0x10 #define USB_CTRL_OBRIDGE_LS_KEEP_ALIVE_MASK 0x08000000 #define USB_CTRL_MDIO 0x14 @@ -57,6 +58,8 @@ #define USB_CTRL_USB_PM_SOFT_RESET_MASK 0x40000000 /* option */ #define USB_CTRL_USB_PM_USB20_HC_RESETB_MASK 0x30000000 /* option */ #define USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK 0x00300000 /* option */ +#define USB_CTRL_USB_PM_RMTWKUP_EN_MASK 0x00000001 +#define USB_CTRL_USB_PM_STATUS 0x38 #define USB_CTRL_USB30_CTL1 0x60 #define USB_CTRL_USB30_CTL1_PHY3_PLL_SEQ_START_MASK 0x00000010 #define USB_CTRL_USB30_CTL1_PHY3_RESETB_MASK 0x00010000 @@ -126,10 +129,6 @@ enum { USB_CTRL_SELECTOR_COUNT, }; -#define USB_CTRL_REG(base, reg) ((void __iomem *)base + USB_CTRL_##reg) -#define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg) -#define USB_CTRL_MASK(reg, field) \ - USB_CTRL_##reg##_##field##_MASK #define USB_CTRL_MASK_FAMILY(params, reg, field) \ (params->usb_reg_bits_map[USB_CTRL_##reg##_##field##_SELECTOR]) @@ -140,13 +139,6 @@ enum { usb_ctrl_unset_family(params, USB_CTRL_##reg, \ USB_CTRL_##reg##_##field##_SELECTOR) -#define USB_CTRL_SET(base, reg, field) \ - usb_ctrl_set(USB_CTRL_REG(base, reg), \ - USB_CTRL_##reg##_##field##_MASK) -#define USB_CTRL_UNSET(base, reg, field) \ - usb_ctrl_unset(USB_CTRL_REG(base, reg), \ - USB_CTRL_##reg##_##field##_MASK) - #define MDIO_USB2 0 #define MDIO_USB3 BIT(31) @@ -176,6 +168,7 @@ static const struct id_to_type id_to_type_table[] = { { 0x33900000, BRCM_FAMILY_3390A0 }, { 0x72500010, BRCM_FAMILY_7250B0 }, { 0x72600000, BRCM_FAMILY_7260A0 }, + { 0x72550000, BRCM_FAMILY_7260A0 }, { 0x72680000, BRCM_FAMILY_7271A0 }, { 0x72710000, BRCM_FAMILY_7271A0 }, { 0x73640000, BRCM_FAMILY_7364A0 }, @@ -401,26 +394,14 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = { }, }; -static inline u32 brcmusb_readl(void __iomem *addr) -{ - return readl(addr); -} - -static inline void brcmusb_writel(u32 val, void __iomem *addr) -{ - writel(val, addr); -} - static inline void usb_ctrl_unset_family(struct brcm_usb_init_params *params, u32 reg_offset, u32 field) { u32 mask; - void __iomem *reg; mask = params->usb_reg_bits_map[field]; - reg = params->ctrl_regs + reg_offset; - brcmusb_writel(brcmusb_readl(reg) & ~mask, reg); + brcm_usb_ctrl_unset(params->regs[BRCM_REGS_CTRL] + reg_offset, mask); }; static inline @@ -428,45 +409,27 @@ void usb_ctrl_set_family(struct brcm_usb_init_params *params, u32 reg_offset, u32 field) { u32 mask; - void __iomem *reg; mask = params->usb_reg_bits_map[field]; - reg = params->ctrl_regs + reg_offset; - brcmusb_writel(brcmusb_readl(reg) | mask, reg); + brcm_usb_ctrl_set(params->regs[BRCM_REGS_CTRL] + reg_offset, mask); }; -static inline void usb_ctrl_set(void __iomem *reg, u32 field) -{ - u32 value; - - value = brcmusb_readl(reg); - brcmusb_writel(value | field, reg); -} - -static inline void usb_ctrl_unset(void __iomem *reg, u32 field) -{ - u32 value; - - value = brcmusb_readl(reg); - brcmusb_writel(value & ~field, reg); -} - static u32 brcmusb_usb_mdio_read(void __iomem *ctrl_base, u32 reg, int mode) { u32 data; data = (reg << 16) | mode; - brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); data |= (1 << 24); - brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); data &= ~(1 << 24); /* wait for the 60MHz parallel to serial shifter */ usleep_range(10, 20); - brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); /* wait for the 60MHz parallel to serial shifter */ usleep_range(10, 20); - return brcmusb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff; + return brcm_usb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff; } static void brcmusb_usb_mdio_write(void __iomem *ctrl_base, u32 reg, @@ -475,14 +438,14 @@ static void brcmusb_usb_mdio_write(void __iomem *ctrl_base, u32 reg, u32 data; data = (reg << 16) | val | mode; - brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); data |= (1 << 25); - brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); data &= ~(1 << 25); /* wait for the 60MHz parallel to serial shifter */ usleep_range(10, 20); - brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); /* wait for the 60MHz parallel to serial shifter */ usleep_range(10, 20); } @@ -581,7 +544,7 @@ static void brcmusb_usb3_pll_54mhz(struct brcm_usb_init_params *params) { u32 ofs; int ii; - void __iomem *ctrl_base = params->ctrl_regs; + void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL]; /* * On newer B53 based SoC's, the reference clock for the @@ -662,7 +625,7 @@ static void brcmusb_usb3_ssc_enable(void __iomem *ctrl_base) static void brcmusb_usb3_phy_workarounds(struct brcm_usb_init_params *params) { - void __iomem *ctrl_base = params->ctrl_regs; + void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL]; brcmusb_usb3_pll_fix(ctrl_base); brcmusb_usb3_pll_54mhz(params); @@ -704,21 +667,21 @@ static void brcmusb_memc_fix(struct brcm_usb_init_params *params) static void brcmusb_usb3_otp_fix(struct brcm_usb_init_params *params) { - void __iomem *xhci_ec_base = params->xhci_ec_regs; + void __iomem *xhci_ec_base = params->regs[BRCM_REGS_XHCI_EC]; u32 val; if (params->family_id != 0x74371000 || !xhci_ec_base) return; - brcmusb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR)); - val = brcmusb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); + brcm_usb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR)); + val = brcm_usb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); /* set cfg_pick_ss_lock */ val |= (1 << 27); - brcmusb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); + brcm_usb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); /* Reset USB 3.0 PHY for workaround to take effect */ - USB_CTRL_UNSET(params->ctrl_regs, USB30_CTL1, PHY3_RESETB); - USB_CTRL_SET(params->ctrl_regs, USB30_CTL1, PHY3_RESETB); + USB_CTRL_UNSET(params->regs[BRCM_REGS_CTRL], USB30_CTL1, PHY3_RESETB); + USB_CTRL_SET(params->regs[BRCM_REGS_CTRL], USB30_CTL1, PHY3_RESETB); } static void brcmusb_xhci_soft_reset(struct brcm_usb_init_params *params, @@ -747,7 +710,7 @@ static void brcmusb_xhci_soft_reset(struct brcm_usb_init_params *params, * - default chip/rev. * NOTE: The minor rev is always ignored. */ -static enum brcm_family_type brcmusb_get_family_type( +static enum brcm_family_type get_family_type( struct brcm_usb_init_params *params) { int last_type = -1; @@ -775,9 +738,9 @@ static enum brcm_family_type brcmusb_get_family_type( return last_type; } -void brcm_usb_init_ipp(struct brcm_usb_init_params *params) +static void usb_init_ipp(struct brcm_usb_init_params *params) { - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; u32 reg; u32 orig_reg; @@ -791,7 +754,7 @@ void brcm_usb_init_ipp(struct brcm_usb_init_params *params) USB_CTRL_SET_FAMILY(params, USB30_CTL1, USB3_IPP); } - reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP)); + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); orig_reg = reg; if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_CC_DRD_MODE_ENABLE_SEL)) /* Never use the strap, it's going away. */ @@ -799,8 +762,8 @@ void brcm_usb_init_ipp(struct brcm_usb_init_params *params) SETUP, STRAP_CC_DRD_MODE_ENABLE_SEL)); if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_IPP_SEL)) + /* override ipp strap pin (if it exits) */ if (params->ipp != 2) - /* override ipp strap pin (if it exits) */ reg &= ~(USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_IPP_SEL)); @@ -808,50 +771,38 @@ void brcm_usb_init_ipp(struct brcm_usb_init_params *params) reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC)); if (params->ioc) reg |= USB_CTRL_MASK(SETUP, IOC); - if (params->ipp == 1 && ((reg & USB_CTRL_MASK(SETUP, IPP)) == 0)) + if (params->ipp == 1) reg |= USB_CTRL_MASK(SETUP, IPP); - brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); /* * If we're changing IPP, make sure power is off long enough * to turn off any connected devices. */ - if (reg != orig_reg) + if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP)) msleep(50); } -int brcm_usb_init_get_dual_select(struct brcm_usb_init_params *params) +static void usb_wake_enable(struct brcm_usb_init_params *params, + bool enable) { - void __iomem *ctrl = params->ctrl_regs; - u32 reg = 0; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; - if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { - reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); - reg &= USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, - PORT_MODE); - } - return reg; + if (enable) + USB_CTRL_SET(ctrl, USB_PM, RMTWKUP_EN); + else + USB_CTRL_UNSET(ctrl, USB_PM, RMTWKUP_EN); } -void brcm_usb_init_set_dual_select(struct brcm_usb_init_params *params, - int mode) +static void usb_init_common(struct brcm_usb_init_params *params) { - void __iomem *ctrl = params->ctrl_regs; u32 reg; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; - if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { - reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); - reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, - PORT_MODE); - reg |= mode; - brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); - } -} - -void brcm_usb_init_common(struct brcm_usb_init_params *params) -{ - u32 reg; - void __iomem *ctrl = params->ctrl_regs; + /* Clear any pending wake conditions */ + usb_wake_enable(params, false); + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS)); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_PM_STATUS)); /* Take USB out of power down */ if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) { @@ -877,7 +828,7 @@ void brcm_usb_init_common(struct brcm_usb_init_params *params) /* Block auto PLL suspend by USB2 PHY (Sasi) */ USB_CTRL_SET(ctrl, PLL_CTL, PLL_SUSPEND_EN); - reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP)); + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); if (params->selected_family == BRCM_FAMILY_7364A0) /* Suppress overcurrent indication from USB30 ports for A0 */ reg |= USB_CTRL_MASK_FAMILY(params, SETUP, OC3_DISABLE); @@ -893,16 +844,16 @@ void brcm_usb_init_common(struct brcm_usb_init_params *params) reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN); if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN)) reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN); - brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); brcmusb_memc_fix(params); if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { - reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE); reg |= params->mode; - brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); } if (USB_CTRL_MASK_FAMILY(params, USB_PM, BDC_SOFT_RESETB)) { switch (params->mode) { @@ -924,10 +875,10 @@ void brcm_usb_init_common(struct brcm_usb_init_params *params) } } -void brcm_usb_init_eohci(struct brcm_usb_init_params *params) +static void usb_init_eohci(struct brcm_usb_init_params *params) { u32 reg; - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB20_HC_RESETB)) USB_CTRL_SET_FAMILY(params, USB_PM, USB20_HC_RESETB); @@ -940,19 +891,30 @@ void brcm_usb_init_eohci(struct brcm_usb_init_params *params) USB_CTRL_SET(ctrl, EBRIDGE, ESTOP_SCB_REQ); /* Setup the endian bits */ - reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP)); + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); reg &= ~USB_CTRL_SETUP_ENDIAN_BITS; reg |= USB_CTRL_MASK_FAMILY(params, SETUP, ENDIAN); - brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); if (params->selected_family == BRCM_FAMILY_7271A0) /* Enable LS keep alive fix for certain keyboards */ USB_CTRL_SET(ctrl, OBRIDGE, LS_KEEP_ALIVE); + + if (params->family_id == 0x72550000) { + /* + * Make the burst size 512 bytes to fix a hardware bug + * on the 7255a0. See HW7255-24. + */ + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, EBRIDGE)); + reg &= ~USB_CTRL_MASK(EBRIDGE, EBR_SCB_SIZE); + reg |= 0x800; + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, EBRIDGE)); + } } -void brcm_usb_init_xhci(struct brcm_usb_init_params *params) +static void usb_init_xhci(struct brcm_usb_init_params *params) { - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; USB_CTRL_UNSET(ctrl, USB30_PCTL, PHY3_IDDQ_OVERRIDE); /* 1 millisecond - for USB clocks to settle down */ @@ -978,34 +940,80 @@ void brcm_usb_init_xhci(struct brcm_usb_init_params *params) brcmusb_usb3_otp_fix(params); } -void brcm_usb_uninit_common(struct brcm_usb_init_params *params) +static void usb_uninit_common(struct brcm_usb_init_params *params) { if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB_PWRDN)) USB_CTRL_SET_FAMILY(params, USB_PM, USB_PWRDN); if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) USB_CTRL_SET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN); + if (params->wake_enabled) + usb_wake_enable(params, true); } -void brcm_usb_uninit_eohci(struct brcm_usb_init_params *params) +static void usb_uninit_eohci(struct brcm_usb_init_params *params) { - if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB20_HC_RESETB)) - USB_CTRL_UNSET_FAMILY(params, USB_PM, USB20_HC_RESETB); } -void brcm_usb_uninit_xhci(struct brcm_usb_init_params *params) +static void usb_uninit_xhci(struct brcm_usb_init_params *params) { brcmusb_xhci_soft_reset(params, 1); - USB_CTRL_SET(params->ctrl_regs, USB30_PCTL, PHY3_IDDQ_OVERRIDE); + USB_CTRL_SET(params->regs[BRCM_REGS_CTRL], USB30_PCTL, + PHY3_IDDQ_OVERRIDE); +} + +static int usb_get_dual_select(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg = 0; + + pr_debug("%s\n", __func__); + if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg &= USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, + PORT_MODE); + } + return reg; } -void brcm_usb_set_family_map(struct brcm_usb_init_params *params) +static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg; + + pr_debug("%s\n", __func__); + + if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, + PORT_MODE); + reg |= mode; + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + } +} + +static const struct brcm_usb_init_ops bcm7445_ops = { + .init_ipp = usb_init_ipp, + .init_common = usb_init_common, + .init_eohci = usb_init_eohci, + .init_xhci = usb_init_xhci, + .uninit_common = usb_uninit_common, + .uninit_eohci = usb_uninit_eohci, + .uninit_xhci = usb_uninit_xhci, + .get_dual_select = usb_get_dual_select, + .set_dual_select = usb_set_dual_select, +}; + +void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params) { int fam; - fam = brcmusb_get_family_type(params); + pr_debug("%s\n", __func__); + + fam = get_family_type(params); params->selected_family = fam; params->usb_reg_bits_map = &usb_reg_bits_map_table[fam][0]; params->family_name = family_names[fam]; + params->ops = &bcm7445_ops; } diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.h b/drivers/phy/broadcom/phy-brcm-usb-init.h index f4f4f6d5d258..899b9eb43fad 100644 --- a/drivers/phy/broadcom/phy-brcm-usb-init.h +++ b/drivers/phy/broadcom/phy-brcm-usb-init.h @@ -6,16 +6,50 @@ #ifndef _USB_BRCM_COMMON_INIT_H #define _USB_BRCM_COMMON_INIT_H +#include <linux/regmap.h> + #define USB_CTLR_MODE_HOST 0 #define USB_CTLR_MODE_DEVICE 1 #define USB_CTLR_MODE_DRD 2 #define USB_CTLR_MODE_TYPEC_PD 3 +enum brcmusb_reg_sel { + BRCM_REGS_CTRL = 0, + BRCM_REGS_XHCI_EC, + BRCM_REGS_XHCI_GBL, + BRCM_REGS_USB_PHY, + BRCM_REGS_USB_MDIO, + BRCM_REGS_BDC_EC, + BRCM_REGS_MAX +}; + +#define USB_CTRL_REG(base, reg) ((void __iomem *)base + USB_CTRL_##reg) +#define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg) +#define USB_CTRL_MASK(reg, field) \ + USB_CTRL_##reg##_##field##_MASK +#define USB_CTRL_SET(base, reg, field) \ + brcm_usb_ctrl_set(USB_CTRL_REG(base, reg), \ + USB_CTRL_##reg##_##field##_MASK) +#define USB_CTRL_UNSET(base, reg, field) \ + brcm_usb_ctrl_unset(USB_CTRL_REG(base, reg), \ + USB_CTRL_##reg##_##field##_MASK) + struct brcm_usb_init_params; +struct brcm_usb_init_ops { + void (*init_ipp)(struct brcm_usb_init_params *params); + void (*init_common)(struct brcm_usb_init_params *params); + void (*init_eohci)(struct brcm_usb_init_params *params); + void (*init_xhci)(struct brcm_usb_init_params *params); + void (*uninit_common)(struct brcm_usb_init_params *params); + void (*uninit_eohci)(struct brcm_usb_init_params *params); + void (*uninit_xhci)(struct brcm_usb_init_params *params); + int (*get_dual_select)(struct brcm_usb_init_params *params); + void (*set_dual_select)(struct brcm_usb_init_params *params, int mode); +}; + struct brcm_usb_init_params { - void __iomem *ctrl_regs; - void __iomem *xhci_ec_regs; + void __iomem *regs[BRCM_REGS_MAX]; int ioc; int ipp; int mode; @@ -24,19 +58,105 @@ struct brcm_usb_init_params { int selected_family; const char *family_name; const u32 *usb_reg_bits_map; + const struct brcm_usb_init_ops *ops; + struct regmap *syscon_piarbctl; + bool wake_enabled; + bool suspend_with_clocks; +}; + +void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params); +void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params); +void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params); + +static inline u32 brcm_usb_readl(void __iomem *addr) +{ + /* + * MIPS endianness is configured by boot strap, which also reverses all + * bus endianness (i.e., big-endian CPU + big endian bus ==> native + * endian I/O). + * + * Other architectures (e.g., ARM) either do not support big endian, or + * else leave I/O in little endian mode. + */ + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN)) + return __raw_readl(addr); + else + return readl_relaxed(addr); +} + +static inline void brcm_usb_writel(u32 val, void __iomem *addr) +{ + /* See brcmnand_readl() comments */ + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN)) + __raw_writel(val, addr); + else + writel_relaxed(val, addr); +} + +static inline void brcm_usb_ctrl_unset(void __iomem *reg, u32 mask) +{ + brcm_usb_writel(brcm_usb_readl(reg) & ~(mask), reg); }; -void brcm_usb_set_family_map(struct brcm_usb_init_params *params); -int brcm_usb_init_get_dual_select(struct brcm_usb_init_params *params); -void brcm_usb_init_set_dual_select(struct brcm_usb_init_params *params, - int mode); - -void brcm_usb_init_ipp(struct brcm_usb_init_params *ini); -void brcm_usb_init_common(struct brcm_usb_init_params *ini); -void brcm_usb_init_eohci(struct brcm_usb_init_params *ini); -void brcm_usb_init_xhci(struct brcm_usb_init_params *ini); -void brcm_usb_uninit_common(struct brcm_usb_init_params *ini); -void brcm_usb_uninit_eohci(struct brcm_usb_init_params *ini); -void brcm_usb_uninit_xhci(struct brcm_usb_init_params *ini); +static inline void brcm_usb_ctrl_set(void __iomem *reg, u32 mask) +{ + brcm_usb_writel(brcm_usb_readl(reg) | (mask), reg); +}; + +static inline void brcm_usb_init_ipp(struct brcm_usb_init_params *ini) +{ + if (ini->ops->init_ipp) + ini->ops->init_ipp(ini); +} + +static inline void brcm_usb_init_common(struct brcm_usb_init_params *ini) +{ + if (ini->ops->init_common) + ini->ops->init_common(ini); +} + +static inline void brcm_usb_init_eohci(struct brcm_usb_init_params *ini) +{ + if (ini->ops->init_eohci) + ini->ops->init_eohci(ini); +} + +static inline void brcm_usb_init_xhci(struct brcm_usb_init_params *ini) +{ + if (ini->ops->init_xhci) + ini->ops->init_xhci(ini); +} + +static inline void brcm_usb_uninit_common(struct brcm_usb_init_params *ini) +{ + if (ini->ops->uninit_common) + ini->ops->uninit_common(ini); +} + +static inline void brcm_usb_uninit_eohci(struct brcm_usb_init_params *ini) +{ + if (ini->ops->uninit_eohci) + ini->ops->uninit_eohci(ini); +} + +static inline void brcm_usb_uninit_xhci(struct brcm_usb_init_params *ini) +{ + if (ini->ops->uninit_xhci) + ini->ops->uninit_xhci(ini); +} + +static inline int brcm_usb_get_dual_select(struct brcm_usb_init_params *ini) +{ + if (ini->ops->get_dual_select) + return ini->ops->get_dual_select(ini); + return 0; +} + +static inline void brcm_usb_set_dual_select(struct brcm_usb_init_params *ini, + int mode) +{ + if (ini->ops->set_dual_select) + ini->ops->set_dual_select(ini, mode); +} #endif /* _USB_BRCM_COMMON_INIT_H */ diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c index f5c1f2983a1d..491bbd46c5b3 100644 --- a/drivers/phy/broadcom/phy-brcm-usb.c +++ b/drivers/phy/broadcom/phy-brcm-usb.c @@ -16,6 +16,7 @@ #include <linux/interrupt.h> #include <linux/soc/brcmstb/brcmstb.h> #include <dt-bindings/phy/phy.h> +#include <linux/mfd/syscon.h> #include "phy-brcm-usb-init.h" @@ -32,6 +33,12 @@ struct value_to_name_map { const char *name; }; +struct match_chip_info { + void *init_func; + u8 required_regs[BRCM_REGS_MAX + 1]; + u8 optional_reg; +}; + static struct value_to_name_map brcm_dr_mode_to_name[] = { { USB_CTLR_MODE_HOST, "host" }, { USB_CTLR_MODE_DEVICE, "peripheral" }, @@ -57,11 +64,26 @@ struct brcm_usb_phy_data { bool has_xhci; struct clk *usb_20_clk; struct clk *usb_30_clk; + struct clk *suspend_clk; struct mutex mutex; /* serialize phy init */ int init_count; + int wake_irq; struct brcm_usb_phy phys[BRCM_USB_PHY_ID_MAX]; }; +static s8 *node_reg_names[BRCM_REGS_MAX] = { + "crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec" +}; + +static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id) +{ + struct phy *gphy = dev_id; + + pm_wakeup_event(&gphy->dev, 0); + + return IRQ_HANDLED; +} + static int brcm_usb_phy_init(struct phy *gphy) { struct brcm_usb_phy *phy = phy_get_drvdata(gphy); @@ -74,8 +96,9 @@ static int brcm_usb_phy_init(struct phy *gphy) */ mutex_lock(&priv->mutex); if (priv->init_count++ == 0) { - clk_enable(priv->usb_20_clk); - clk_enable(priv->usb_30_clk); + clk_prepare_enable(priv->usb_20_clk); + clk_prepare_enable(priv->usb_30_clk); + clk_prepare_enable(priv->suspend_clk); brcm_usb_init_common(&priv->ini); } mutex_unlock(&priv->mutex); @@ -106,8 +129,9 @@ static int brcm_usb_phy_exit(struct phy *gphy) mutex_lock(&priv->mutex); if (--priv->init_count == 0) { brcm_usb_uninit_common(&priv->ini); - clk_disable(priv->usb_20_clk); - clk_disable(priv->usb_30_clk); + clk_disable_unprepare(priv->usb_20_clk); + clk_disable_unprepare(priv->usb_30_clk); + clk_disable_unprepare(priv->suspend_clk); } mutex_unlock(&priv->mutex); phy->inited = false; @@ -194,7 +218,7 @@ static ssize_t dual_select_store(struct device *dev, res = name_to_value(&brcm_dual_mode_to_name[0], ARRAY_SIZE(brcm_dual_mode_to_name), buf, &value); if (!res) { - brcm_usb_init_set_dual_select(&priv->ini, value); + brcm_usb_set_dual_select(&priv->ini, value); res = len; } mutex_unlock(&sysfs_lock); @@ -209,7 +233,7 @@ static ssize_t dual_select_show(struct device *dev, int value; mutex_lock(&sysfs_lock); - value = brcm_usb_init_get_dual_select(&priv->ini); + value = brcm_usb_get_dual_select(&priv->ini); mutex_unlock(&sysfs_lock); return sprintf(buf, "%s\n", value_to_name(&brcm_dual_mode_to_name[0], @@ -228,15 +252,106 @@ static const struct attribute_group brcm_usb_phy_group = { .attrs = brcm_usb_phy_attrs, }; -static int brcm_usb_phy_dvr_init(struct device *dev, +static struct match_chip_info chip_info_7216 = { + .init_func = &brcm_usb_dvr_init_7216, + .required_regs = { + BRCM_REGS_CTRL, + BRCM_REGS_XHCI_EC, + BRCM_REGS_XHCI_GBL, + -1, + }, +}; + +static struct match_chip_info chip_info_7211b0 = { + .init_func = &brcm_usb_dvr_init_7211b0, + .required_regs = { + BRCM_REGS_CTRL, + BRCM_REGS_XHCI_EC, + BRCM_REGS_XHCI_GBL, + BRCM_REGS_USB_PHY, + BRCM_REGS_USB_MDIO, + -1, + }, + .optional_reg = BRCM_REGS_BDC_EC, +}; + +static struct match_chip_info chip_info_7445 = { + .init_func = &brcm_usb_dvr_init_7445, + .required_regs = { + BRCM_REGS_CTRL, + BRCM_REGS_XHCI_EC, + -1, + }, +}; + +static const struct of_device_id brcm_usb_dt_ids[] = { + { + .compatible = "brcm,bcm7216-usb-phy", + .data = &chip_info_7216, + }, + { + .compatible = "brcm,bcm7211-usb-phy", + .data = &chip_info_7211b0, + }, + { + .compatible = "brcm,brcmstb-usb-phy", + .data = &chip_info_7445, + }, + { /* sentinel */ } +}; + +static int brcm_usb_get_regs(struct platform_device *pdev, + enum brcmusb_reg_sel regs, + struct brcm_usb_init_params *ini, + bool optional) +{ + struct resource *res; + + /* Older DT nodes have ctrl and optional xhci_ec by index only */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + node_reg_names[regs]); + if (res == NULL) { + if (regs == BRCM_REGS_CTRL) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + } else if (regs == BRCM_REGS_XHCI_EC) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + /* XHCI_EC registers are optional */ + if (res == NULL) + return 0; + } + if (res == NULL) { + if (optional) { + dev_dbg(&pdev->dev, + "Optional reg %s not found\n", + node_reg_names[regs]); + return 0; + } + dev_err(&pdev->dev, "can't get %s base addr\n", + node_reg_names[regs]); + return 1; + } + } + ini->regs[regs] = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ini->regs[regs])) { + dev_err(&pdev->dev, "can't map %s register space\n", + node_reg_names[regs]); + return 1; + } + return 0; +} + +static int brcm_usb_phy_dvr_init(struct platform_device *pdev, struct brcm_usb_phy_data *priv, struct device_node *dn) { - struct phy *gphy; + struct device *dev = &pdev->dev; + struct phy *gphy = NULL; int err; priv->usb_20_clk = of_clk_get_by_name(dn, "sw_usb"); if (IS_ERR(priv->usb_20_clk)) { + if (PTR_ERR(priv->usb_20_clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; dev_info(dev, "Clock not found in Device Tree\n"); priv->usb_20_clk = NULL; } @@ -267,6 +382,8 @@ static int brcm_usb_phy_dvr_init(struct device *dev, priv->usb_30_clk = of_clk_get_by_name(dn, "sw_usb3"); if (IS_ERR(priv->usb_30_clk)) { + if (PTR_ERR(priv->usb_30_clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; dev_info(dev, "USB3.0 clock not found in Device Tree\n"); priv->usb_30_clk = NULL; @@ -275,18 +392,46 @@ static int brcm_usb_phy_dvr_init(struct device *dev, if (err) return err; } + + priv->suspend_clk = clk_get(dev, "usb0_freerun"); + if (IS_ERR(priv->suspend_clk)) { + if (PTR_ERR(priv->suspend_clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_err(dev, "Suspend Clock not found in Device Tree\n"); + priv->suspend_clk = NULL; + } + + priv->wake_irq = platform_get_irq_byname(pdev, "wake"); + if (priv->wake_irq < 0) + priv->wake_irq = platform_get_irq_byname(pdev, "wakeup"); + if (priv->wake_irq >= 0) { + err = devm_request_irq(dev, priv->wake_irq, + brcm_usb_phy_wake_isr, 0, + dev_name(dev), gphy); + if (err < 0) + return err; + device_set_wakeup_capable(dev, 1); + } else { + dev_info(dev, + "Wake interrupt missing, system wake not supported\n"); + } + return 0; } static int brcm_usb_phy_probe(struct platform_device *pdev) { - struct resource *res; struct device *dev = &pdev->dev; struct brcm_usb_phy_data *priv; struct phy_provider *phy_provider; struct device_node *dn = pdev->dev.of_node; int err; const char *mode; + const struct of_device_id *match; + void (*dvr_init)(struct brcm_usb_init_params *params); + const struct match_chip_info *info; + struct regmap *rmap; + int x; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -295,30 +440,14 @@ static int brcm_usb_phy_probe(struct platform_device *pdev) priv->ini.family_id = brcmstb_get_family_id(); priv->ini.product_id = brcmstb_get_product_id(); - brcm_usb_set_family_map(&priv->ini); + + match = of_match_node(brcm_usb_dt_ids, dev->of_node); + info = match->data; + dvr_init = info->init_func; + (*dvr_init)(&priv->ini); + dev_dbg(dev, "Best mapping table is for %s\n", priv->ini.family_name); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "can't get USB_CTRL base address\n"); - return -EINVAL; - } - priv->ini.ctrl_regs = devm_ioremap_resource(dev, res); - if (IS_ERR(priv->ini.ctrl_regs)) { - dev_err(dev, "can't map CTRL register space\n"); - return -EINVAL; - } - - /* The XHCI EC registers are optional */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (res) { - priv->ini.xhci_ec_regs = - devm_ioremap_resource(dev, res); - if (IS_ERR(priv->ini.xhci_ec_regs)) { - dev_err(dev, "can't map XHCI EC register space\n"); - return -EINVAL; - } - } of_property_read_u32(dn, "brcm,ipp", &priv->ini.ipp); of_property_read_u32(dn, "brcm,ioc", &priv->ini.ioc); @@ -335,7 +464,23 @@ static int brcm_usb_phy_probe(struct platform_device *pdev) if (of_property_read_bool(dn, "brcm,has-eohci")) priv->has_eohci = true; - err = brcm_usb_phy_dvr_init(dev, priv, dn); + for (x = 0; x < BRCM_REGS_MAX; x++) { + if (info->required_regs[x] >= BRCM_REGS_MAX) + break; + + err = brcm_usb_get_regs(pdev, info->required_regs[x], + &priv->ini, false); + if (err) + return -EINVAL; + } + if (info->optional_reg) { + err = brcm_usb_get_regs(pdev, info->optional_reg, + &priv->ini, true); + if (err) + return -EINVAL; + } + + err = brcm_usb_phy_dvr_init(pdev, priv, dn); if (err) return err; @@ -354,14 +499,23 @@ static int brcm_usb_phy_probe(struct platform_device *pdev) if (err) dev_warn(dev, "Error creating sysfs attributes\n"); + /* Get piarbctl syscon if it exists */ + rmap = syscon_regmap_lookup_by_phandle(dev->of_node, + "syscon-piarbctl"); + if (IS_ERR(rmap)) + rmap = syscon_regmap_lookup_by_phandle(dev->of_node, + "brcm,syscon-piarbctl"); + if (!IS_ERR(rmap)) + priv->ini.syscon_piarbctl = rmap; + /* start with everything off */ if (priv->has_xhci) brcm_usb_uninit_xhci(&priv->ini); if (priv->has_eohci) brcm_usb_uninit_eohci(&priv->ini); brcm_usb_uninit_common(&priv->ini); - clk_disable(priv->usb_20_clk); - clk_disable(priv->usb_30_clk); + clk_disable_unprepare(priv->usb_20_clk); + clk_disable_unprepare(priv->usb_30_clk); phy_provider = devm_of_phy_provider_register(dev, brcm_usb_phy_xlate); @@ -381,8 +535,28 @@ static int brcm_usb_phy_suspend(struct device *dev) struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); if (priv->init_count) { - clk_disable(priv->usb_20_clk); - clk_disable(priv->usb_30_clk); + priv->ini.wake_enabled = device_may_wakeup(dev); + if (priv->phys[BRCM_USB_PHY_3_0].inited) + brcm_usb_uninit_xhci(&priv->ini); + if (priv->phys[BRCM_USB_PHY_2_0].inited) + brcm_usb_uninit_eohci(&priv->ini); + brcm_usb_uninit_common(&priv->ini); + + /* + * Handle the clocks unless needed for wake. This has + * to work for both older XHCI->3.0-clks, EOHCI->2.0-clks + * and newer XHCI->2.0-clks/3.0-clks. + */ + + if (!priv->ini.suspend_with_clocks) { + if (priv->phys[BRCM_USB_PHY_3_0].inited) + clk_disable_unprepare(priv->usb_30_clk); + if (priv->phys[BRCM_USB_PHY_2_0].inited || + !priv->has_eohci) + clk_disable_unprepare(priv->usb_20_clk); + } + if (priv->wake_irq >= 0) + enable_irq_wake(priv->wake_irq); } return 0; } @@ -391,8 +565,8 @@ static int brcm_usb_phy_resume(struct device *dev) { struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); - clk_enable(priv->usb_20_clk); - clk_enable(priv->usb_30_clk); + clk_prepare_enable(priv->usb_20_clk); + clk_prepare_enable(priv->usb_30_clk); brcm_usb_init_ipp(&priv->ini); /* @@ -400,18 +574,22 @@ static int brcm_usb_phy_resume(struct device *dev) * Uninitialize anything that wasn't previously initialized. */ if (priv->init_count) { + if (priv->wake_irq >= 0) + disable_irq_wake(priv->wake_irq); brcm_usb_init_common(&priv->ini); if (priv->phys[BRCM_USB_PHY_2_0].inited) { brcm_usb_init_eohci(&priv->ini); } else if (priv->has_eohci) { brcm_usb_uninit_eohci(&priv->ini); - clk_disable(priv->usb_20_clk); + clk_disable_unprepare(priv->usb_20_clk); } if (priv->phys[BRCM_USB_PHY_3_0].inited) { brcm_usb_init_xhci(&priv->ini); } else if (priv->has_xhci) { brcm_usb_uninit_xhci(&priv->ini); - clk_disable(priv->usb_30_clk); + clk_disable_unprepare(priv->usb_30_clk); + if (!priv->has_eohci) + clk_disable_unprepare(priv->usb_20_clk); } } else { if (priv->has_xhci) @@ -419,10 +597,10 @@ static int brcm_usb_phy_resume(struct device *dev) if (priv->has_eohci) brcm_usb_uninit_eohci(&priv->ini); brcm_usb_uninit_common(&priv->ini); - clk_disable(priv->usb_20_clk); - clk_disable(priv->usb_30_clk); + clk_disable_unprepare(priv->usb_20_clk); + clk_disable_unprepare(priv->usb_30_clk); } - + priv->ini.wake_enabled = false; return 0; } #endif /* CONFIG_PM_SLEEP */ @@ -431,11 +609,6 @@ static const struct dev_pm_ops brcm_usb_phy_pm_ops = { SET_LATE_SYSTEM_SLEEP_PM_OPS(brcm_usb_phy_suspend, brcm_usb_phy_resume) }; -static const struct of_device_id brcm_usb_dt_ids[] = { - { .compatible = "brcm,brcmstb-usb-phy" }, - { /* sentinel */ } -}; - MODULE_DEVICE_TABLE(of, brcm_usb_dt_ids); static struct platform_driver brcm_usb_driver = { |