aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/bcm
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pinctrl/bcm')
-rw-r--r--drivers/pinctrl/bcm/Kconfig1
-rw-r--r--drivers/pinctrl/bcm/pinctrl-bcm2835.c165
-rw-r--r--drivers/pinctrl/bcm/pinctrl-iproc-gpio.c2
-rw-r--r--drivers/pinctrl/bcm/pinctrl-nsp-gpio.c2
4 files changed, 99 insertions, 71 deletions
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index 63246770bd74..8968dd7aebed 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -20,6 +20,7 @@ config PINCTRL_BCM2835
bool
select PINMUX
select PINCONF
+ select GPIOLIB_IRQCHIP
config PINCTRL_IPROC_GPIO
bool "Broadcom iProc GPIO (with PINCONF) driver"
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
index 4cf612bcfdfa..85d009112864 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -24,11 +24,9 @@
#include <linux/device.h>
#include <linux/err.h>
#include <linux/gpio/driver.h>
-#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqdesc.h>
-#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of.h>
@@ -47,6 +45,7 @@
#define MODULE_NAME "pinctrl-bcm2835"
#define BCM2835_NUM_GPIOS 54
#define BCM2835_NUM_BANKS 2
+#define BCM2835_NUM_IRQS 3
#define BCM2835_PIN_BITMAP_SZ \
DIV_ROUND_UP(BCM2835_NUM_GPIOS, sizeof(unsigned long) * 8)
@@ -80,31 +79,23 @@ enum bcm2835_pinconf_param {
#define BCM2835_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16)
#define BCM2835_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff)
-struct bcm2835_gpio_irqdata {
- struct bcm2835_pinctrl *pc;
- int bank;
-};
-
struct bcm2835_pinctrl {
struct device *dev;
void __iomem *base;
- int irq[BCM2835_NUM_BANKS];
+ int irq[BCM2835_NUM_IRQS];
/* note: locking assumes each bank will have its own unsigned long */
unsigned long enabled_irq_map[BCM2835_NUM_BANKS];
unsigned int irq_type[BCM2835_NUM_GPIOS];
struct pinctrl_dev *pctl_dev;
- struct irq_domain *irq_domain;
struct gpio_chip gpio_chip;
struct pinctrl_gpio_range gpio_range;
- struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_BANKS];
+ int irq_group[BCM2835_NUM_IRQS];
spinlock_t irq_lock[BCM2835_NUM_BANKS];
};
-static struct lock_class_key gpio_lock_class;
-
/* pins are just named GPIO0..GPIO53 */
#define BCM2835_GPIO_PIN(a) PINCTRL_PIN(a, "gpio" #a)
static struct pinctrl_pin_desc bcm2835_gpio_pins[] = {
@@ -362,13 +353,6 @@ static int bcm2835_gpio_direction_output(struct gpio_chip *chip,
return pinctrl_gpio_direction_output(chip->base + offset);
}
-static int bcm2835_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
-
- return irq_linear_revmap(pc->irq_domain, offset);
-}
-
static struct gpio_chip bcm2835_gpio_chip = {
.label = MODULE_NAME,
.owner = THIS_MODULE,
@@ -379,31 +363,67 @@ static struct gpio_chip bcm2835_gpio_chip = {
.get_direction = bcm2835_gpio_get_direction,
.get = bcm2835_gpio_get,
.set = bcm2835_gpio_set,
- .to_irq = bcm2835_gpio_to_irq,
.base = -1,
.ngpio = BCM2835_NUM_GPIOS,
.can_sleep = false,
};
-static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id)
+static void bcm2835_gpio_irq_handle_bank(struct bcm2835_pinctrl *pc,
+ unsigned int bank, u32 mask)
{
- struct bcm2835_gpio_irqdata *irqdata = dev_id;
- struct bcm2835_pinctrl *pc = irqdata->pc;
- int bank = irqdata->bank;
unsigned long events;
unsigned offset;
unsigned gpio;
unsigned int type;
events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4);
+ events &= mask;
events &= pc->enabled_irq_map[bank];
for_each_set_bit(offset, &events, 32) {
gpio = (32 * bank) + offset;
+ /* FIXME: no clue why the code looks up the type here */
type = pc->irq_type[gpio];
- generic_handle_irq(irq_linear_revmap(pc->irq_domain, gpio));
+ generic_handle_irq(irq_linear_revmap(pc->gpio_chip.irqdomain,
+ gpio));
}
- return events ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static void bcm2835_gpio_irq_handler(struct irq_desc *desc)
+{
+ struct gpio_chip *chip = irq_desc_get_handler_data(desc);
+ struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
+ struct irq_chip *host_chip = irq_desc_get_chip(desc);
+ int irq = irq_desc_get_irq(desc);
+ int group;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(pc->irq); i++) {
+ if (pc->irq[i] == irq) {
+ group = pc->irq_group[i];
+ break;
+ }
+ }
+ /* This should not happen, every IRQ has a bank */
+ if (i == ARRAY_SIZE(pc->irq))
+ BUG();
+
+ chained_irq_enter(host_chip, desc);
+
+ switch (group) {
+ case 0: /* IRQ0 covers GPIOs 0-27 */
+ bcm2835_gpio_irq_handle_bank(pc, 0, 0x0fffffff);
+ break;
+ case 1: /* IRQ1 covers GPIOs 28-45 */
+ bcm2835_gpio_irq_handle_bank(pc, 0, 0xf0000000);
+ bcm2835_gpio_irq_handle_bank(pc, 1, 0x00003fff);
+ break;
+ case 2: /* IRQ2 covers GPIOs 46-53 */
+ bcm2835_gpio_irq_handle_bank(pc, 1, 0x003fc000);
+ break;
+ }
+
+ chained_irq_exit(host_chip, desc);
}
static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
@@ -449,7 +469,8 @@ static void bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
static void bcm2835_gpio_irq_enable(struct irq_data *data)
{
- struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data);
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
unsigned gpio = irqd_to_hwirq(data);
unsigned offset = GPIO_REG_SHIFT(gpio);
unsigned bank = GPIO_REG_OFFSET(gpio);
@@ -463,7 +484,8 @@ static void bcm2835_gpio_irq_enable(struct irq_data *data)
static void bcm2835_gpio_irq_disable(struct irq_data *data)
{
- struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data);
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
unsigned gpio = irqd_to_hwirq(data);
unsigned offset = GPIO_REG_SHIFT(gpio);
unsigned bank = GPIO_REG_OFFSET(gpio);
@@ -569,7 +591,8 @@ static int __bcm2835_gpio_irq_set_type_enabled(struct bcm2835_pinctrl *pc,
static int bcm2835_gpio_irq_set_type(struct irq_data *data, unsigned int type)
{
- struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data);
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
unsigned gpio = irqd_to_hwirq(data);
unsigned offset = GPIO_REG_SHIFT(gpio);
unsigned bank = GPIO_REG_OFFSET(gpio);
@@ -595,7 +618,8 @@ static int bcm2835_gpio_irq_set_type(struct irq_data *data, unsigned int type)
static void bcm2835_gpio_irq_ack(struct irq_data *data)
{
- struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data);
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
unsigned gpio = irqd_to_hwirq(data);
bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
@@ -638,10 +662,11 @@ static void bcm2835_pctl_pin_dbg_show(struct pinctrl_dev *pctldev,
unsigned offset)
{
struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ struct gpio_chip *chip = &pc->gpio_chip;
enum bcm2835_fsel fsel = bcm2835_pinctrl_fsel_get(pc, offset);
const char *fname = bcm2835_functions[fsel];
int value = bcm2835_gpio_get_bit(pc, GPLEV0, offset);
- int irq = irq_find_mapping(pc->irq_domain, offset);
+ int irq = irq_find_mapping(chip->irqdomain, offset);
seq_printf(s, "function %s in %s; irq %d (%s)",
fname, value ? "hi" : "lo",
@@ -815,6 +840,16 @@ static const struct pinctrl_ops bcm2835_pctl_ops = {
.dt_free_map = bcm2835_pctl_dt_free_map,
};
+static int bcm2835_pmx_free(struct pinctrl_dev *pctldev,
+ unsigned offset)
+{
+ struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+
+ /* disable by setting to GPIO_IN */
+ bcm2835_pinctrl_fsel_set(pc, offset, BCM2835_FSEL_GPIO_IN);
+ return 0;
+}
+
static int bcm2835_pmx_get_functions_count(struct pinctrl_dev *pctldev)
{
return BCM2835_FSEL_COUNT;
@@ -874,6 +909,7 @@ static int bcm2835_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
}
static const struct pinmux_ops bcm2835_pmx_ops = {
+ .free = bcm2835_pmx_free,
.get_functions_count = bcm2835_pmx_get_functions_count,
.get_function_name = bcm2835_pmx_get_function_name,
.get_function_groups = bcm2835_pmx_get_function_groups,
@@ -911,12 +947,14 @@ static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev,
bcm2835_gpio_wr(pc, GPPUD, arg & 3);
/*
- * Docs say to wait 150 cycles, but not of what. We assume a
- * 1 MHz clock here, which is pretty slow...
+ * BCM2835 datasheet say to wait 150 cycles, but not of what.
+ * But the VideoCore firmware delay for this operation
+ * based nearly on the same amount of VPU cycles and this clock
+ * runs at 250 MHz.
*/
- udelay(150);
+ udelay(1);
bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit));
- udelay(150);
+ udelay(1);
bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0);
} /* for each config */
@@ -974,26 +1012,9 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
pc->gpio_chip.parent = dev;
pc->gpio_chip.of_node = np;
- pc->irq_domain = irq_domain_add_linear(np, BCM2835_NUM_GPIOS,
- &irq_domain_simple_ops, NULL);
- if (!pc->irq_domain) {
- dev_err(dev, "could not create IRQ domain\n");
- return -ENOMEM;
- }
-
- for (i = 0; i < BCM2835_NUM_GPIOS; i++) {
- int irq = irq_create_mapping(pc->irq_domain, i);
- irq_set_lockdep_class(irq, &gpio_lock_class);
- irq_set_chip_and_handler(irq, &bcm2835_gpio_irq_chip,
- handle_level_irq);
- irq_set_chip_data(irq, pc);
- }
-
for (i = 0; i < BCM2835_NUM_BANKS; i++) {
unsigned long events;
unsigned offset;
- int len;
- char *name;
/* clear event detection flags */
bcm2835_gpio_wr(pc, GPREN0 + i * 4, 0);
@@ -1008,24 +1029,7 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
for_each_set_bit(offset, &events, 32)
bcm2835_gpio_wr(pc, GPEDS0 + i * 4, BIT(offset));
- pc->irq[i] = irq_of_parse_and_map(np, i);
- pc->irq_data[i].pc = pc;
- pc->irq_data[i].bank = i;
spin_lock_init(&pc->irq_lock[i]);
-
- len = strlen(dev_name(pc->dev)) + 16;
- name = devm_kzalloc(pc->dev, len, GFP_KERNEL);
- if (!name)
- return -ENOMEM;
- snprintf(name, len, "%s:bank%d", dev_name(pc->dev), i);
-
- err = devm_request_irq(dev, pc->irq[i],
- bcm2835_gpio_irq_handler, IRQF_SHARED,
- name, &pc->irq_data[i]);
- if (err) {
- dev_err(dev, "unable to request IRQ %d\n", pc->irq[i]);
- return err;
- }
}
err = gpiochip_add_data(&pc->gpio_chip, pc);
@@ -1034,6 +1038,29 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
return err;
}
+ err = gpiochip_irqchip_add(&pc->gpio_chip, &bcm2835_gpio_irq_chip,
+ 0, handle_level_irq, IRQ_TYPE_NONE);
+ if (err) {
+ dev_info(dev, "could not add irqchip\n");
+ return err;
+ }
+
+ for (i = 0; i < BCM2835_NUM_IRQS; i++) {
+ pc->irq[i] = irq_of_parse_and_map(np, i);
+ pc->irq_group[i] = i;
+ /*
+ * Use the same handler for all groups: this is necessary
+ * since we use one gpiochip to cover all lines - the
+ * irq handler then needs to figure out which group and
+ * bank that was firing the IRQ and look up the per-group
+ * and bank data.
+ */
+ gpiochip_set_chained_irqchip(&pc->gpio_chip,
+ &bcm2835_gpio_irq_chip,
+ pc->irq[i],
+ bcm2835_gpio_irq_handler);
+ }
+
pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc);
if (IS_ERR(pc->pctl_dev)) {
gpiochip_remove(&pc->gpio_chip);
diff --git a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
index 7f7700716398..5d1e505c3c63 100644
--- a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
+++ b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
@@ -844,6 +844,6 @@ static struct platform_driver iproc_gpio_driver = {
static int __init iproc_gpio_init(void)
{
- return platform_driver_probe(&iproc_gpio_driver, iproc_gpio_probe);
+ return platform_driver_register(&iproc_gpio_driver);
}
arch_initcall_sync(iproc_gpio_init);
diff --git a/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c b/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c
index 35783db1c10b..c8deb8be1da7 100644
--- a/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c
+++ b/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c
@@ -741,6 +741,6 @@ static struct platform_driver nsp_gpio_driver = {
static int __init nsp_gpio_init(void)
{
- return platform_driver_probe(&nsp_gpio_driver, nsp_gpio_probe);
+ return platform_driver_register(&nsp_gpio_driver);
}
arch_initcall_sync(nsp_gpio_init);