diff options
Diffstat (limited to 'drivers/platform/chrome/cros_ec_lpc_mec.h')
-rw-r--r-- | drivers/platform/chrome/cros_ec_lpc_mec.h | 63 |
1 files changed, 26 insertions, 37 deletions
diff --git a/drivers/platform/chrome/cros_ec_lpc_mec.h b/drivers/platform/chrome/cros_ec_lpc_mec.h index 105068c0e919..aa1018f6b0f2 100644 --- a/drivers/platform/chrome/cros_ec_lpc_mec.h +++ b/drivers/platform/chrome/cros_ec_lpc_mec.h @@ -1,31 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* - * cros_ec_lpc_mec - LPC variant I/O for Microchip EC + * LPC variant I/O for Microchip EC * * Copyright (C) 2016 Google, Inc - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * This driver uses the Chrome OS EC byte-level message-based protocol for - * communicating the keyboard state (which keys are pressed) from a keyboard EC - * to the AP over some bus (such as i2c, lpc, spi). The EC does debouncing, - * but everything else (including deghosting) is done here. The main - * motivation for this is to keep the EC firmware as simple as possible, since - * it cannot be easily upgraded and EC flash/IRAM space is relatively - * expensive. */ #ifndef __CROS_EC_LPC_MEC_H #define __CROS_EC_LPC_MEC_H -#include <linux/mfd/cros_ec_commands.h> - enum cros_ec_lpc_mec_emi_access_mode { /* 8-bit access */ ACCESS_TYPE_BYTE = 0x0, @@ -45,27 +27,23 @@ enum cros_ec_lpc_mec_io_type { MEC_IO_WRITE, }; -/* Access IO ranges 0x800 thru 0x9ff using EMI interface instead of LPC */ -#define MEC_EMI_RANGE_START EC_HOST_CMD_REGION0 -#define MEC_EMI_RANGE_END (EC_LPC_ADDR_MEMMAP + EC_MEMMAP_SIZE) - /* EMI registers are relative to base */ -#define MEC_EMI_BASE 0x800 -#define MEC_EMI_HOST_TO_EC (MEC_EMI_BASE + 0) -#define MEC_EMI_EC_TO_HOST (MEC_EMI_BASE + 1) -#define MEC_EMI_EC_ADDRESS_B0 (MEC_EMI_BASE + 2) -#define MEC_EMI_EC_ADDRESS_B1 (MEC_EMI_BASE + 3) -#define MEC_EMI_EC_DATA_B0 (MEC_EMI_BASE + 4) -#define MEC_EMI_EC_DATA_B1 (MEC_EMI_BASE + 5) -#define MEC_EMI_EC_DATA_B2 (MEC_EMI_BASE + 6) -#define MEC_EMI_EC_DATA_B3 (MEC_EMI_BASE + 7) +#define MEC_EMI_HOST_TO_EC(MEC_EMI_BASE) ((MEC_EMI_BASE) + 0) +#define MEC_EMI_EC_TO_HOST(MEC_EMI_BASE) ((MEC_EMI_BASE) + 1) +#define MEC_EMI_EC_ADDRESS_B0(MEC_EMI_BASE) ((MEC_EMI_BASE) + 2) +#define MEC_EMI_EC_ADDRESS_B1(MEC_EMI_BASE) ((MEC_EMI_BASE) + 3) +#define MEC_EMI_EC_DATA_B0(MEC_EMI_BASE) ((MEC_EMI_BASE) + 4) +#define MEC_EMI_EC_DATA_B1(MEC_EMI_BASE) ((MEC_EMI_BASE) + 5) +#define MEC_EMI_EC_DATA_B2(MEC_EMI_BASE) ((MEC_EMI_BASE) + 6) +#define MEC_EMI_EC_DATA_B3(MEC_EMI_BASE) ((MEC_EMI_BASE) + 7) -/* - * cros_ec_lpc_mec_init +/** + * cros_ec_lpc_mec_init() - Initialize MEC I/O. * - * Initialize MEC I/O. + * @base: MEC EMI Base address + * @end: MEC EMI End address */ -void cros_ec_lpc_mec_init(void); +void cros_ec_lpc_mec_init(unsigned int base, unsigned int end); /* * cros_ec_lpc_mec_destroy @@ -75,6 +53,17 @@ void cros_ec_lpc_mec_init(void); void cros_ec_lpc_mec_destroy(void); /** + * cros_ec_lpc_mec_in_range() - Determine if addresses are in MEC EMI range. + * + * @offset: Address offset + * @length: Number of bytes to check + * + * Return: 1 if in range, 0 if not, and -EINVAL on failure + * such as the mec range not being initialized + */ +int cros_ec_lpc_mec_in_range(unsigned int offset, unsigned int length); + +/** * cros_ec_lpc_io_bytes_mec - Read / write bytes to MEC EMI port * * @io_type: MEC_IO_READ or MEC_IO_WRITE, depending on request |