diff options
Diffstat (limited to 'drivers/platform/x86/intel_scu_ipc.c')
| -rw-r--r-- | drivers/platform/x86/intel_scu_ipc.c | 414 |
1 files changed, 91 insertions, 323 deletions
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index cdab916fbf92..3d7da5266136 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -26,11 +26,7 @@ #include <asm/intel_scu_ipc.h> /* IPC defines the following message types */ -#define IPCMSG_WATCHDOG_TIMER 0xF8 /* Set Kernel Watchdog Threshold */ -#define IPCMSG_BATTERY 0xEF /* Coulomb Counter Accumulator */ -#define IPCMSG_FW_UPDATE 0xFE /* Firmware update */ -#define IPCMSG_PCNTRL 0xFF /* Power controller unit read/write */ -#define IPCMSG_FW_REVISION 0xF4 /* Get firmware revision */ +#define IPCMSG_PCNTRL 0xff /* Power controller unit read/write */ /* Command id associated with message IPCMSG_PCNTRL */ #define IPC_CMD_PCNTRL_W 0 /* Register write */ @@ -58,56 +54,29 @@ #define IPC_RWBUF_SIZE 20 /* IPC Read buffer Size */ #define IPC_IOC 0x100 /* IPC command register IOC bit */ -#define PCI_DEVICE_ID_LINCROFT 0x082a -#define PCI_DEVICE_ID_PENWELL 0x080e -#define PCI_DEVICE_ID_CLOVERVIEW 0x08ea -#define PCI_DEVICE_ID_TANGIER 0x11a0 - -/* intel scu ipc driver data */ -struct intel_scu_ipc_pdata_t { - u32 i2c_base; - u32 i2c_len; - u8 irq_mode; -}; - -static const struct intel_scu_ipc_pdata_t intel_scu_ipc_lincroft_pdata = { - .i2c_base = 0xff12b000, - .i2c_len = 0x10, - .irq_mode = 0, -}; - -/* Penwell and Cloverview */ -static const struct intel_scu_ipc_pdata_t intel_scu_ipc_penwell_pdata = { - .i2c_base = 0xff12b000, - .i2c_len = 0x10, - .irq_mode = 1, -}; - -static const struct intel_scu_ipc_pdata_t intel_scu_ipc_tangier_pdata = { - .i2c_base = 0xff00d000, - .i2c_len = 0x10, - .irq_mode = 0, -}; - struct intel_scu_ipc_dev { struct device *dev; void __iomem *ipc_base; - void __iomem *i2c_base; struct completion cmd_complete; u8 irq_mode; }; static struct intel_scu_ipc_dev ipcdev; /* Only one for now */ +#define IPC_STATUS 0x04 +#define IPC_STATUS_IRQ BIT(2) +#define IPC_STATUS_ERR BIT(1) +#define IPC_STATUS_BUSY BIT(0) + /* - * IPC Read Buffer (Read Only): - * 16 byte buffer for receiving data from SCU, if IPC command - * processing results in response data + * IPC Write/Read Buffers: + * 16 byte buffer for sending and receiving data to and from SCU. */ +#define IPC_WRITE_BUFFER 0x80 #define IPC_READ_BUFFER 0x90 -#define IPC_I2C_CNTRL_ADDR 0 -#define I2C_DATA_ADDR 0x04 +/* Timeout in jiffies */ +#define IPC_TIMEOUT (3 * HZ) static DEFINE_MUTEX(ipclock); /* lock used to prevent multiple call to SCU */ @@ -120,11 +89,8 @@ static DEFINE_MUTEX(ipclock); /* lock used to prevent multiple call to SCU */ */ static inline void ipc_command(struct intel_scu_ipc_dev *scu, u32 cmd) { - if (scu->irq_mode) { - reinit_completion(&scu->cmd_complete); - writel(cmd | IPC_IOC, scu->ipc_base); - } - writel(cmd, scu->ipc_base); + reinit_completion(&scu->cmd_complete); + writel(cmd | IPC_IOC, scu->ipc_base); } /* @@ -135,7 +101,7 @@ static inline void ipc_command(struct intel_scu_ipc_dev *scu, u32 cmd) */ static inline void ipc_data_writel(struct intel_scu_ipc_dev *scu, u32 data, u32 offset) { - writel(data, scu->ipc_base + 0x80 + offset); + writel(data, scu->ipc_base + IPC_WRITE_BUFFER + offset); } /* @@ -147,7 +113,7 @@ static inline void ipc_data_writel(struct intel_scu_ipc_dev *scu, u32 data, u32 */ static inline u8 ipc_read_status(struct intel_scu_ipc_dev *scu) { - return __raw_readl(scu->ipc_base + 0x04); + return __raw_readl(scu->ipc_base + IPC_STATUS); } /* Read ipc byte data */ @@ -165,24 +131,20 @@ static inline u32 ipc_data_readl(struct intel_scu_ipc_dev *scu, u32 offset) /* Wait till scu status is busy */ static inline int busy_loop(struct intel_scu_ipc_dev *scu) { - u32 status = ipc_read_status(scu); - u32 loop_count = 100000; + unsigned long end = jiffies + msecs_to_jiffies(IPC_TIMEOUT); - /* break if scu doesn't reset busy bit after huge retry */ - while ((status & BIT(0)) && --loop_count) { - udelay(1); /* scu processing time is in few u secods */ - status = ipc_read_status(scu); - } + do { + u32 status; - if (status & BIT(0)) { - dev_err(scu->dev, "IPC timed out"); - return -ETIMEDOUT; - } + status = ipc_read_status(scu); + if (!(status & IPC_STATUS_BUSY)) + return (status & IPC_STATUS_ERR) ? -EIO : 0; - if (status & BIT(1)) - return -EIO; + usleep_range(50, 100); + } while (time_before(jiffies, end)); - return 0; + dev_err(scu->dev, "IPC timed out"); + return -ETIMEDOUT; } /* Wait till ipc ioc interrupt is received or timeout in 3 HZ */ @@ -190,13 +152,13 @@ static inline int ipc_wait_for_interrupt(struct intel_scu_ipc_dev *scu) { int status; - if (!wait_for_completion_timeout(&scu->cmd_complete, 3 * HZ)) { + if (!wait_for_completion_timeout(&scu->cmd_complete, IPC_TIMEOUT)) { dev_err(scu->dev, "IPC timed out\n"); return -ETIMEDOUT; } status = ipc_read_status(scu); - if (status & BIT(1)) + if (status & IPC_STATUS_ERR) return -EIO; return 0; @@ -260,14 +222,14 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id) } /** - * intel_scu_ipc_ioread8 - read a word via the SCU - * @addr: register on SCU - * @data: return pointer for read byte + * intel_scu_ipc_ioread8 - read a word via the SCU + * @addr: Register on SCU + * @data: Return pointer for read byte * - * Read a single register. Returns 0 on success or an error code. All - * locking between SCU accesses is handled for the caller. + * Read a single register. Returns %0 on success or an error code. All + * locking between SCU accesses is handled for the caller. * - * This function may sleep. + * This function may sleep. */ int intel_scu_ipc_ioread8(u16 addr, u8 *data) { @@ -276,48 +238,14 @@ int intel_scu_ipc_ioread8(u16 addr, u8 *data) EXPORT_SYMBOL(intel_scu_ipc_ioread8); /** - * intel_scu_ipc_ioread16 - read a word via the SCU - * @addr: register on SCU - * @data: return pointer for read word - * - * Read a register pair. Returns 0 on success or an error code. All - * locking between SCU accesses is handled for the caller. - * - * This function may sleep. - */ -int intel_scu_ipc_ioread16(u16 addr, u16 *data) -{ - u16 x[2] = {addr, addr + 1}; - return pwr_reg_rdwr(x, (u8 *)data, 2, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R); -} -EXPORT_SYMBOL(intel_scu_ipc_ioread16); - -/** - * intel_scu_ipc_ioread32 - read a dword via the SCU - * @addr: register on SCU - * @data: return pointer for read dword - * - * Read four registers. Returns 0 on success or an error code. All - * locking between SCU accesses is handled for the caller. - * - * This function may sleep. - */ -int intel_scu_ipc_ioread32(u16 addr, u32 *data) -{ - u16 x[4] = {addr, addr + 1, addr + 2, addr + 3}; - return pwr_reg_rdwr(x, (u8 *)data, 4, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R); -} -EXPORT_SYMBOL(intel_scu_ipc_ioread32); - -/** - * intel_scu_ipc_iowrite8 - write a byte via the SCU - * @addr: register on SCU - * @data: byte to write + * intel_scu_ipc_iowrite8 - write a byte via the SCU + * @addr: Register on SCU + * @data: Byte to write * - * Write a single register. Returns 0 on success or an error code. All - * locking between SCU accesses is handled for the caller. + * Write a single register. Returns %0 on success or an error code. All + * locking between SCU accesses is handled for the caller. * - * This function may sleep. + * This function may sleep. */ int intel_scu_ipc_iowrite8(u16 addr, u8 data) { @@ -326,51 +254,17 @@ int intel_scu_ipc_iowrite8(u16 addr, u8 data) EXPORT_SYMBOL(intel_scu_ipc_iowrite8); /** - * intel_scu_ipc_iowrite16 - write a word via the SCU - * @addr: register on SCU - * @data: word to write - * - * Write two registers. Returns 0 on success or an error code. All - * locking between SCU accesses is handled for the caller. + * intel_scu_ipc_readvv - read a set of registers + * @addr: Register list + * @data: Bytes to return + * @len: Length of array * - * This function may sleep. - */ -int intel_scu_ipc_iowrite16(u16 addr, u16 data) -{ - u16 x[2] = {addr, addr + 1}; - return pwr_reg_rdwr(x, (u8 *)&data, 2, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W); -} -EXPORT_SYMBOL(intel_scu_ipc_iowrite16); - -/** - * intel_scu_ipc_iowrite32 - write a dword via the SCU - * @addr: register on SCU - * @data: dword to write + * Read registers. Returns %0 on success or an error code. All locking + * between SCU accesses is handled for the caller. * - * Write four registers. Returns 0 on success or an error code. All - * locking between SCU accesses is handled for the caller. + * The largest array length permitted by the hardware is 5 items. * - * This function may sleep. - */ -int intel_scu_ipc_iowrite32(u16 addr, u32 data) -{ - u16 x[4] = {addr, addr + 1, addr + 2, addr + 3}; - return pwr_reg_rdwr(x, (u8 *)&data, 4, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W); -} -EXPORT_SYMBOL(intel_scu_ipc_iowrite32); - -/** - * intel_scu_ipc_readvv - read a set of registers - * @addr: register list - * @data: bytes to return - * @len: length of array - * - * Read registers. Returns 0 on success or an error code. All - * locking between SCU accesses is handled for the caller. - * - * The largest array length permitted by the hardware is 5 items. - * - * This function may sleep. + * This function may sleep. */ int intel_scu_ipc_readv(u16 *addr, u8 *data, int len) { @@ -379,18 +273,17 @@ int intel_scu_ipc_readv(u16 *addr, u8 *data, int len) EXPORT_SYMBOL(intel_scu_ipc_readv); /** - * intel_scu_ipc_writev - write a set of registers - * @addr: register list - * @data: bytes to write - * @len: length of array - * - * Write registers. Returns 0 on success or an error code. All - * locking between SCU accesses is handled for the caller. + * intel_scu_ipc_writev - write a set of registers + * @addr: Register list + * @data: Bytes to write + * @len: Length of array * - * The largest array length permitted by the hardware is 5 items. + * Write registers. Returns %0 on success or an error code. All locking + * between SCU accesses is handled for the caller. * - * This function may sleep. + * The largest array length permitted by the hardware is 5 items. * + * This function may sleep. */ int intel_scu_ipc_writev(u16 *addr, u8 *data, int len) { @@ -399,19 +292,18 @@ int intel_scu_ipc_writev(u16 *addr, u8 *data, int len) EXPORT_SYMBOL(intel_scu_ipc_writev); /** - * intel_scu_ipc_update_register - r/m/w a register - * @addr: register address - * @bits: bits to update - * @mask: mask of bits to update - * - * Read-modify-write power control unit register. The first data argument - * must be register value and second is mask value - * mask is a bitmap that indicates which bits to update. - * 0 = masked. Don't modify this bit, 1 = modify this bit. - * returns 0 on success or an error code. - * - * This function may sleep. Locking between SCU accesses is handled - * for the caller. + * intel_scu_ipc_update_register - r/m/w a register + * @addr: Register address + * @bits: Bits to update + * @mask: Mask of bits to update + * + * Read-modify-write power control unit register. The first data argument + * must be register value and second is mask value mask is a bitmap that + * indicates which bits to update. %0 = masked. Don't modify this bit, %1 = + * modify this bit. returns %0 on success or an error code. + * + * This function may sleep. Locking between SCU accesses is handled + * for the caller. */ int intel_scu_ipc_update_register(u16 addr, u8 bits, u8 mask) { @@ -421,16 +313,16 @@ int intel_scu_ipc_update_register(u16 addr, u8 bits, u8 mask) EXPORT_SYMBOL(intel_scu_ipc_update_register); /** - * intel_scu_ipc_simple_command - send a simple command - * @cmd: command - * @sub: sub type + * intel_scu_ipc_simple_command - send a simple command + * @cmd: Command + * @sub: Sub type * - * Issue a simple command to the SCU. Do not use this interface if - * you must then access data as any data values may be overwritten - * by another SCU access by the time this function returns. + * Issue a simple command to the SCU. Do not use this interface if you must + * then access data as any data values may be overwritten by another SCU + * access by the time this function returns. * - * This function may sleep. Locking for SCU accesses is handled for - * the caller. + * This function may sleep. Locking for SCU accesses is handled for the + * caller. */ int intel_scu_ipc_simple_command(int cmd, int sub) { @@ -450,16 +342,16 @@ int intel_scu_ipc_simple_command(int cmd, int sub) EXPORT_SYMBOL(intel_scu_ipc_simple_command); /** - * intel_scu_ipc_command - command with data - * @cmd: command - * @sub: sub type - * @in: input data - * @inlen: input length in dwords - * @out: output data - * @outlein: output length in dwords - * - * Issue a command to the SCU which involves data transfers. Do the - * data copies under the lock but leave it for the caller to interpret + * intel_scu_ipc_command - command with data + * @cmd: Command + * @sub: Sub type + * @in: Input data + * @inlen: Input length in dwords + * @out: Output data + * @outlen: Output length in dwords + * + * Issue a command to the SCU which involves data transfers. Do the + * data copies under the lock but leave it for the caller to interpret. */ int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen, u32 *out, int outlen) @@ -489,117 +381,6 @@ int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen, } EXPORT_SYMBOL(intel_scu_ipc_command); -#define IPC_SPTR 0x08 -#define IPC_DPTR 0x0C - -/** - * intel_scu_ipc_raw_command() - IPC command with data and pointers - * @cmd: IPC command code. - * @sub: IPC command sub type. - * @in: input data of this IPC command. - * @inlen: input data length in dwords. - * @out: output data of this IPC command. - * @outlen: output data length in dwords. - * @sptr: data writing to SPTR register. - * @dptr: data writing to DPTR register. - * - * Send an IPC command to SCU with input/output data and source/dest pointers. - * - * Return: an IPC error code or 0 on success. - */ -int intel_scu_ipc_raw_command(int cmd, int sub, u8 *in, int inlen, - u32 *out, int outlen, u32 dptr, u32 sptr) -{ - struct intel_scu_ipc_dev *scu = &ipcdev; - int inbuflen = DIV_ROUND_UP(inlen, 4); - u32 inbuf[4]; - int i, err; - - /* Up to 16 bytes */ - if (inbuflen > 4) - return -EINVAL; - - mutex_lock(&ipclock); - if (scu->dev == NULL) { - mutex_unlock(&ipclock); - return -ENODEV; - } - - writel(dptr, scu->ipc_base + IPC_DPTR); - writel(sptr, scu->ipc_base + IPC_SPTR); - - /* - * SRAM controller doesn't support 8-bit writes, it only - * supports 32-bit writes, so we have to copy input data into - * the temporary buffer, and SCU FW will use the inlen to - * determine the actual input data length in the temporary - * buffer. - */ - memcpy(inbuf, in, inlen); - - for (i = 0; i < inbuflen; i++) - ipc_data_writel(scu, inbuf[i], 4 * i); - - ipc_command(scu, (inlen << 16) | (sub << 12) | cmd); - err = intel_scu_ipc_check_status(scu); - if (!err) { - for (i = 0; i < outlen; i++) - *out++ = ipc_data_readl(scu, 4 * i); - } - - mutex_unlock(&ipclock); - return err; -} -EXPORT_SYMBOL_GPL(intel_scu_ipc_raw_command); - -/* I2C commands */ -#define IPC_I2C_WRITE 1 /* I2C Write command */ -#define IPC_I2C_READ 2 /* I2C Read command */ - -/** - * intel_scu_ipc_i2c_cntrl - I2C read/write operations - * @addr: I2C address + command bits - * @data: data to read/write - * - * Perform an an I2C read/write operation via the SCU. All locking is - * handled for the caller. This function may sleep. - * - * Returns an error code or 0 on success. - * - * This has to be in the IPC driver for the locking. - */ -int intel_scu_ipc_i2c_cntrl(u32 addr, u32 *data) -{ - struct intel_scu_ipc_dev *scu = &ipcdev; - u32 cmd = 0; - - mutex_lock(&ipclock); - if (scu->dev == NULL) { - mutex_unlock(&ipclock); - return -ENODEV; - } - cmd = (addr >> 24) & 0xFF; - if (cmd == IPC_I2C_READ) { - writel(addr, scu->i2c_base + IPC_I2C_CNTRL_ADDR); - /* Write not getting updated without delay */ - usleep_range(1000, 2000); - *data = readl(scu->i2c_base + I2C_DATA_ADDR); - } else if (cmd == IPC_I2C_WRITE) { - writel(*data, scu->i2c_base + I2C_DATA_ADDR); - usleep_range(1000, 2000); - writel(addr, scu->i2c_base + IPC_I2C_CNTRL_ADDR); - } else { - dev_err(scu->dev, - "intel_scu_ipc: I2C INVALID_CMD = 0x%x\n", cmd); - - mutex_unlock(&ipclock); - return -EIO; - } - mutex_unlock(&ipclock); - return 0; -} -EXPORT_SYMBOL(intel_scu_ipc_i2c_cntrl); - /* * Interrupt handler gets called when ioc bit of IPC_COMMAND_REG set to 1 * When ioc bit is set to 1, caller api must wait for interrupt handler called @@ -610,9 +391,10 @@ EXPORT_SYMBOL(intel_scu_ipc_i2c_cntrl); static irqreturn_t ioc(int irq, void *dev_id) { struct intel_scu_ipc_dev *scu = dev_id; + int status = ipc_read_status(scu); - if (scu->irq_mode) - complete(&scu->cmd_complete); + writel(status | IPC_STATUS_IRQ, scu->ipc_base + IPC_STATUS); + complete(&scu->cmd_complete); return IRQ_HANDLED; } @@ -629,17 +411,10 @@ static int ipc_probe(struct pci_dev *pdev, const struct pci_device_id *id) { int err; struct intel_scu_ipc_dev *scu = &ipcdev; - struct intel_scu_ipc_pdata_t *pdata; if (scu->dev) /* We support only one SCU */ return -EBUSY; - pdata = (struct intel_scu_ipc_pdata_t *)id->driver_data; - if (!pdata) - return -ENODEV; - - scu->irq_mode = pdata->irq_mode; - err = pcim_enable_device(pdev); if (err) return err; @@ -652,10 +427,6 @@ static int ipc_probe(struct pci_dev *pdev, const struct pci_device_id *id) scu->ipc_base = pcim_iomap_table(pdev)[0]; - scu->i2c_base = ioremap_nocache(pdata->i2c_base, pdata->i2c_len); - if (!scu->i2c_base) - return -ENOMEM; - err = devm_request_irq(&pdev->dev, pdev->irq, ioc, 0, "intel_scu_ipc", scu); if (err) @@ -670,13 +441,10 @@ static int ipc_probe(struct pci_dev *pdev, const struct pci_device_id *id) return 0; } -#define SCU_DEVICE(id, pdata) {PCI_VDEVICE(INTEL, id), (kernel_ulong_t)&pdata} - static const struct pci_device_id pci_ids[] = { - SCU_DEVICE(PCI_DEVICE_ID_LINCROFT, intel_scu_ipc_lincroft_pdata), - SCU_DEVICE(PCI_DEVICE_ID_PENWELL, intel_scu_ipc_penwell_pdata), - SCU_DEVICE(PCI_DEVICE_ID_CLOVERVIEW, intel_scu_ipc_penwell_pdata), - SCU_DEVICE(PCI_DEVICE_ID_TANGIER, intel_scu_ipc_tangier_pdata), + { PCI_VDEVICE(INTEL, 0x080e) }, + { PCI_VDEVICE(INTEL, 0x08ea) }, + { PCI_VDEVICE(INTEL, 0x11a0) }, {} }; |