aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/platform
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/platform')
-rw-r--r--drivers/platform/chrome/Kconfig9
-rw-r--r--drivers/platform/chrome/Makefile1
-rw-r--r--drivers/platform/chrome/cros_ec_dev.c189
-rw-r--r--drivers/platform/chrome/cros_ec_dev.h7
-rw-r--r--drivers/platform/chrome/cros_ec_lightbar.c217
-rw-r--r--drivers/platform/chrome/cros_ec_lpc.c85
-rw-r--r--drivers/platform/chrome/cros_ec_proto.c382
-rw-r--r--drivers/platform/chrome/cros_ec_sysfs.c178
-rw-r--r--drivers/platform/goldfish/goldfish_pipe.c20
-rw-r--r--drivers/platform/x86/Kconfig43
-rw-r--r--drivers/platform/x86/Makefile1
-rw-r--r--drivers/platform/x86/acer-wmi.c10
-rw-r--r--drivers/platform/x86/acerhdf.c3
-rw-r--r--drivers/platform/x86/apple-gmux.c4
-rw-r--r--drivers/platform/x86/asus-laptop.c6
-rw-r--r--drivers/platform/x86/asus-wmi.c359
-rw-r--r--drivers/platform/x86/compal-laptop.c4
-rw-r--r--drivers/platform/x86/dell-laptop.c102
-rw-r--r--drivers/platform/x86/dell-rbtn.c423
-rw-r--r--drivers/platform/x86/dell-rbtn.h24
-rw-r--r--drivers/platform/x86/dell-wmi.c3
-rw-r--r--drivers/platform/x86/eeepc-laptop.c5
-rw-r--r--drivers/platform/x86/fujitsu-laptop.c6
-rw-r--r--drivers/platform/x86/ideapad-laptop.c13
-rw-r--r--drivers/platform/x86/intel_oaktrail.c7
-rw-r--r--drivers/platform/x86/msi-laptop.c6
-rw-r--r--drivers/platform/x86/msi-wmi.c4
-rw-r--r--drivers/platform/x86/pvpanic.c10
-rw-r--r--drivers/platform/x86/samsung-laptop.c27
-rw-r--r--drivers/platform/x86/sony-laptop.c7
-rw-r--r--drivers/platform/x86/thinkpad_acpi.c5
-rw-r--r--drivers/platform/x86/toshiba_acpi.c253
-rw-r--r--drivers/platform/x86/toshiba_bluetooth.c174
-rw-r--r--drivers/platform/x86/toshiba_haps.c32
34 files changed, 2009 insertions, 610 deletions
diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
index 2a6531a5fde8..cb1329919527 100644
--- a/drivers/platform/chrome/Kconfig
+++ b/drivers/platform/chrome/Kconfig
@@ -40,7 +40,7 @@ config CHROMEOS_PSTORE
config CROS_EC_CHARDEV
tristate "Chrome OS Embedded Controller userspace device interface"
- depends on MFD_CROS_EC
+ depends on CROS_EC_PROTO
---help---
This driver adds support to talk with the ChromeOS EC from userspace.
@@ -49,7 +49,7 @@ config CROS_EC_CHARDEV
config CROS_EC_LPC
tristate "ChromeOS Embedded Controller (LPC)"
- depends on MFD_CROS_EC && (X86 || COMPILE_TEST)
+ depends on MFD_CROS_EC && CROS_EC_PROTO && (X86 || COMPILE_TEST)
help
If you say Y here, you get support for talking to the ChromeOS EC
over an LPC bus. This uses a simple byte-level protocol with a
@@ -59,4 +59,9 @@ config CROS_EC_LPC
To compile this driver as a module, choose M here: the
module will be called cros_ec_lpc.
+config CROS_EC_PROTO
+ bool
+ help
+ ChromeOS EC communication protocol helpers.
+
endif # CHROMEOS_PLATFORMS
diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
index bd8d8601e875..4a11b010f5d8 100644
--- a/drivers/platform/chrome/Makefile
+++ b/drivers/platform/chrome/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_CHROMEOS_PSTORE) += chromeos_pstore.o
cros_ec_devs-objs := cros_ec_dev.o cros_ec_sysfs.o cros_ec_lightbar.o
obj-$(CONFIG_CROS_EC_CHARDEV) += cros_ec_devs.o
obj-$(CONFIG_CROS_EC_LPC) += cros_ec_lpc.o
+obj-$(CONFIG_CROS_EC_PROTO) += cros_ec_proto.o
diff --git a/drivers/platform/chrome/cros_ec_dev.c b/drivers/platform/chrome/cros_ec_dev.c
index 6090d0b2826f..e8fcdc237029 100644
--- a/drivers/platform/chrome/cros_ec_dev.c
+++ b/drivers/platform/chrome/cros_ec_dev.c
@@ -20,44 +20,59 @@
#include <linux/fs.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include "cros_ec_dev.h"
/* Device variables */
#define CROS_MAX_DEV 128
-static struct class *cros_class;
static int ec_major;
+static const struct attribute_group *cros_ec_groups[] = {
+ &cros_ec_attr_group,
+ &cros_ec_lightbar_attr_group,
+ NULL,
+};
+
+static struct class cros_class = {
+ .owner = THIS_MODULE,
+ .name = "chromeos",
+ .dev_groups = cros_ec_groups,
+};
+
/* Basic communication */
-static int ec_get_version(struct cros_ec_device *ec, char *str, int maxlen)
+static int ec_get_version(struct cros_ec_dev *ec, char *str, int maxlen)
{
struct ec_response_get_version *resp;
static const char * const current_image_name[] = {
"unknown", "read-only", "read-write", "invalid",
};
- struct cros_ec_command msg = {
- .version = 0,
- .command = EC_CMD_GET_VERSION,
- .outdata = { 0 },
- .outsize = 0,
- .indata = { 0 },
- .insize = sizeof(*resp),
- };
+ struct cros_ec_command *msg;
int ret;
- ret = cros_ec_cmd_xfer(ec, &msg);
+ msg = kmalloc(sizeof(*msg) + sizeof(*resp), GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ msg->version = 0;
+ msg->command = EC_CMD_GET_VERSION + ec->cmd_offset;
+ msg->insize = sizeof(*resp);
+ msg->outsize = 0;
+
+ ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
if (ret < 0)
- return ret;
+ goto exit;
- if (msg.result != EC_RES_SUCCESS) {
+ if (msg->result != EC_RES_SUCCESS) {
snprintf(str, maxlen,
"%s\nUnknown EC version: EC returned %d\n",
- CROS_EC_DEV_VERSION, msg.result);
- return 0;
+ CROS_EC_DEV_VERSION, msg->result);
+ ret = -EINVAL;
+ goto exit;
}
- resp = (struct ec_response_get_version *)msg.indata;
+ resp = (struct ec_response_get_version *)msg->data;
if (resp->current_image >= ARRAY_SIZE(current_image_name))
resp->current_image = 3; /* invalid */
@@ -65,14 +80,19 @@ static int ec_get_version(struct cros_ec_device *ec, char *str, int maxlen)
resp->version_string_ro, resp->version_string_rw,
current_image_name[resp->current_image]);
- return 0;
+ ret = 0;
+exit:
+ kfree(msg);
+ return ret;
}
/* Device file ops */
static int ec_device_open(struct inode *inode, struct file *filp)
{
- filp->private_data = container_of(inode->i_cdev,
- struct cros_ec_device, cdev);
+ struct cros_ec_dev *ec = container_of(inode->i_cdev,
+ struct cros_ec_dev, cdev);
+ filp->private_data = ec;
+ nonseekable_open(inode, filp);
return 0;
}
@@ -84,7 +104,7 @@ static int ec_device_release(struct inode *inode, struct file *filp)
static ssize_t ec_device_read(struct file *filp, char __user *buffer,
size_t length, loff_t *offset)
{
- struct cros_ec_device *ec = filp->private_data;
+ struct cros_ec_dev *ec = filp->private_data;
char msg[sizeof(struct ec_response_get_version) +
sizeof(CROS_EC_DEV_VERSION)];
size_t count;
@@ -107,38 +127,53 @@ static ssize_t ec_device_read(struct file *filp, char __user *buffer,
}
/* Ioctls */
-static long ec_device_ioctl_xcmd(struct cros_ec_device *ec, void __user *arg)
+static long ec_device_ioctl_xcmd(struct cros_ec_dev *ec, void __user *arg)
{
long ret;
- struct cros_ec_command s_cmd = { };
+ struct cros_ec_command u_cmd;
+ struct cros_ec_command *s_cmd;
- if (copy_from_user(&s_cmd, arg, sizeof(s_cmd)))
+ if (copy_from_user(&u_cmd, arg, sizeof(u_cmd)))
return -EFAULT;
- ret = cros_ec_cmd_xfer(ec, &s_cmd);
+ s_cmd = kmalloc(sizeof(*s_cmd) + max(u_cmd.outsize, u_cmd.insize),
+ GFP_KERNEL);
+ if (!s_cmd)
+ return -ENOMEM;
+
+ if (copy_from_user(s_cmd, arg, sizeof(*s_cmd) + u_cmd.outsize)) {
+ ret = -EFAULT;
+ goto exit;
+ }
+
+ s_cmd->command += ec->cmd_offset;
+ ret = cros_ec_cmd_xfer(ec->ec_dev, s_cmd);
/* Only copy data to userland if data was received. */
if (ret < 0)
- return ret;
-
- if (copy_to_user(arg, &s_cmd, sizeof(s_cmd)))
- return -EFAULT;
+ goto exit;
- return 0;
+ if (copy_to_user(arg, s_cmd, sizeof(*s_cmd) + u_cmd.insize))
+ ret = -EFAULT;
+exit:
+ kfree(s_cmd);
+ return ret;
}
-static long ec_device_ioctl_readmem(struct cros_ec_device *ec, void __user *arg)
+static long ec_device_ioctl_readmem(struct cros_ec_dev *ec, void __user *arg)
{
+ struct cros_ec_device *ec_dev = ec->ec_dev;
struct cros_ec_readmem s_mem = { };
long num;
/* Not every platform supports direct reads */
- if (!ec->cmd_readmem)
+ if (!ec_dev->cmd_readmem)
return -ENOTTY;
if (copy_from_user(&s_mem, arg, sizeof(s_mem)))
return -EFAULT;
- num = ec->cmd_readmem(ec, s_mem.offset, s_mem.bytes, s_mem.buffer);
+ num = ec_dev->cmd_readmem(ec_dev, s_mem.offset, s_mem.bytes,
+ s_mem.buffer);
if (num <= 0)
return num;
@@ -151,7 +186,7 @@ static long ec_device_ioctl_readmem(struct cros_ec_device *ec, void __user *arg)
static long ec_device_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg)
{
- struct cros_ec_device *ec = filp->private_data;
+ struct cros_ec_dev *ec = filp->private_data;
if (_IOC_TYPE(cmd) != CROS_EC_DEV_IOC)
return -ENOTTY;
@@ -174,45 +209,81 @@ static const struct file_operations fops = {
.unlocked_ioctl = ec_device_ioctl,
};
+static void __remove(struct device *dev)
+{
+ struct cros_ec_dev *ec = container_of(dev, struct cros_ec_dev,
+ class_dev);
+ kfree(ec);
+}
+
static int ec_device_probe(struct platform_device *pdev)
{
- struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
- int retval = -ENOTTY;
- dev_t devno = MKDEV(ec_major, 0);
+ int retval = -ENOMEM;
+ struct device *dev = &pdev->dev;
+ struct cros_ec_platform *ec_platform = dev_get_platdata(dev);
+ dev_t devno = MKDEV(ec_major, pdev->id);
+ struct cros_ec_dev *ec = kzalloc(sizeof(*ec), GFP_KERNEL);
+
+ if (!ec)
+ return retval;
- /* Instantiate it (and remember the EC) */
+ dev_set_drvdata(dev, ec);
+ ec->ec_dev = dev_get_drvdata(dev->parent);
+ ec->dev = dev;
+ ec->cmd_offset = ec_platform->cmd_offset;
+ device_initialize(&ec->class_dev);
cdev_init(&ec->cdev, &fops);
+ /*
+ * Add the character device
+ * Link cdev to the class device to be sure device is not used
+ * before unbinding it.
+ */
+ ec->cdev.kobj.parent = &ec->class_dev.kobj;
retval = cdev_add(&ec->cdev, devno, 1);
if (retval) {
- dev_err(&pdev->dev, ": failed to add character device\n");
- return retval;
+ dev_err(dev, ": failed to add character device\n");
+ goto cdev_add_failed;
}
- ec->vdev = device_create(cros_class, NULL, devno, ec,
- CROS_EC_DEV_NAME);
- if (IS_ERR(ec->vdev)) {
- retval = PTR_ERR(ec->vdev);
- dev_err(&pdev->dev, ": failed to create device\n");
- cdev_del(&ec->cdev);
- return retval;
+ /*
+ * Add the class device
+ * Link to the character device for creating the /dev entry
+ * in devtmpfs.
+ */
+ ec->class_dev.devt = ec->cdev.dev;
+ ec->class_dev.class = &cros_class;
+ ec->class_dev.parent = dev;
+ ec->class_dev.release = __remove;
+
+ retval = dev_set_name(&ec->class_dev, "%s", ec_platform->ec_name);
+ if (retval) {
+ dev_err(dev, "dev_set_name failed => %d\n", retval);
+ goto set_named_failed;
}
- /* Initialize extra interfaces */
- ec_dev_sysfs_init(ec);
- ec_dev_lightbar_init(ec);
+ retval = device_add(&ec->class_dev);
+ if (retval) {
+ dev_err(dev, "device_register failed => %d\n", retval);
+ goto dev_reg_failed;
+ }
return 0;
+
+dev_reg_failed:
+set_named_failed:
+ dev_set_drvdata(dev, NULL);
+ cdev_del(&ec->cdev);
+cdev_add_failed:
+ kfree(ec);
+ return retval;
}
static int ec_device_remove(struct platform_device *pdev)
{
- struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
-
- ec_dev_lightbar_remove(ec);
- ec_dev_sysfs_remove(ec);
- device_destroy(cros_class, MKDEV(ec_major, 0));
+ struct cros_ec_dev *ec = dev_get_drvdata(&pdev->dev);
cdev_del(&ec->cdev);
+ device_unregister(&ec->class_dev);
return 0;
}
@@ -229,10 +300,10 @@ static int __init cros_ec_dev_init(void)
int ret;
dev_t dev = 0;
- cros_class = class_create(THIS_MODULE, "chromeos");
- if (IS_ERR(cros_class)) {
+ ret = class_register(&cros_class);
+ if (ret) {
pr_err(CROS_EC_DEV_NAME ": failed to register device class\n");
- return PTR_ERR(cros_class);
+ return ret;
}
/* Get a range of minor numbers (starting with 0) to work with */
@@ -254,7 +325,7 @@ static int __init cros_ec_dev_init(void)
failed_devreg:
unregister_chrdev_region(MKDEV(ec_major, 0), CROS_MAX_DEV);
failed_chrdevreg:
- class_destroy(cros_class);
+ class_unregister(&cros_class);
return ret;
}
@@ -262,7 +333,7 @@ static void __exit cros_ec_dev_exit(void)
{
platform_driver_unregister(&cros_ec_dev_driver);
unregister_chrdev(ec_major, CROS_EC_DEV_NAME);
- class_destroy(cros_class);
+ class_unregister(&cros_class);
}
module_init(cros_ec_dev_init);
diff --git a/drivers/platform/chrome/cros_ec_dev.h b/drivers/platform/chrome/cros_ec_dev.h
index 45d67f7e518c..bfd2c84c3571 100644
--- a/drivers/platform/chrome/cros_ec_dev.h
+++ b/drivers/platform/chrome/cros_ec_dev.h
@@ -24,7 +24,6 @@
#include <linux/types.h>
#include <linux/mfd/cros_ec.h>
-#define CROS_EC_DEV_NAME "cros_ec"
#define CROS_EC_DEV_VERSION "1.0.0"
/*
@@ -44,10 +43,4 @@ struct cros_ec_readmem {
#define CROS_EC_DEV_IOCXCMD _IOWR(CROS_EC_DEV_IOC, 0, struct cros_ec_command)
#define CROS_EC_DEV_IOCRDMEM _IOWR(CROS_EC_DEV_IOC, 1, struct cros_ec_readmem)
-void ec_dev_sysfs_init(struct cros_ec_device *);
-void ec_dev_sysfs_remove(struct cros_ec_device *);
-
-void ec_dev_lightbar_init(struct cros_ec_device *);
-void ec_dev_lightbar_remove(struct cros_ec_device *);
-
#endif /* _CROS_EC_DEV_H_ */
diff --git a/drivers/platform/chrome/cros_ec_lightbar.c b/drivers/platform/chrome/cros_ec_lightbar.c
index b4ff47a9069a..144e09df9b84 100644
--- a/drivers/platform/chrome/cros_ec_lightbar.c
+++ b/drivers/platform/chrome/cros_ec_lightbar.c
@@ -31,6 +31,7 @@
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
#include "cros_ec_dev.h"
@@ -91,55 +92,81 @@ out:
return ret;
}
-#define INIT_MSG(P, R) { \
- .command = EC_CMD_LIGHTBAR_CMD, \
- .outsize = sizeof(*P), \
- .insize = sizeof(*R), \
- }
+static struct cros_ec_command *alloc_lightbar_cmd_msg(struct cros_ec_dev *ec)
+{
+ struct cros_ec_command *msg;
+ int len;
+
+ len = max(sizeof(struct ec_params_lightbar),
+ sizeof(struct ec_response_lightbar));
+
+ msg = kmalloc(sizeof(*msg) + len, GFP_KERNEL);
+ if (!msg)
+ return NULL;
+
+ msg->version = 0;
+ msg->command = EC_CMD_LIGHTBAR_CMD + ec->cmd_offset;
+ msg->outsize = sizeof(struct ec_params_lightbar);
+ msg->insize = sizeof(struct ec_response_lightbar);
+
+ return msg;
+}
-static int get_lightbar_version(struct cros_ec_device *ec,
+static int get_lightbar_version(struct cros_ec_dev *ec,
uint32_t *ver_ptr, uint32_t *flg_ptr)
{
struct ec_params_lightbar *param;
struct ec_response_lightbar *resp;
- struct cros_ec_command msg = INIT_MSG(param, resp);
+ struct cros_ec_command *msg;
int ret;
- param = (struct ec_params_lightbar *)msg.outdata;
- param->cmd = LIGHTBAR_CMD_VERSION;
- ret = cros_ec_cmd_xfer(ec, &msg);
- if (ret < 0)
+ msg = alloc_lightbar_cmd_msg(ec);
+ if (!msg)
return 0;
- switch (msg.result) {
+ param = (struct ec_params_lightbar *)msg->data;
+ param->cmd = LIGHTBAR_CMD_VERSION;
+ ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
+ if (ret < 0) {
+ ret = 0;
+ goto exit;
+ }
+
+ switch (msg->result) {
case EC_RES_INVALID_PARAM:
/* Pixel had no version command. */
if (ver_ptr)
*ver_ptr = 0;
if (flg_ptr)
*flg_ptr = 0;
- return 1;
+ ret = 1;
+ goto exit;
case EC_RES_SUCCESS:
- resp = (struct ec_response_lightbar *)msg.indata;
+ resp = (struct ec_response_lightbar *)msg->data;
/* Future devices w/lightbars should implement this command */
if (ver_ptr)
*ver_ptr = resp->version.num;
if (flg_ptr)
*flg_ptr = resp->version.flags;
- return 1;
+ ret = 1;
+ goto exit;
}
/* Anything else (ie, EC_RES_INVALID_COMMAND) - no lightbar */
- return 0;
+ ret = 0;
+exit:
+ kfree(msg);
+ return ret;
}
static ssize_t version_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- uint32_t version, flags;
- struct cros_ec_device *ec = dev_get_drvdata(dev);
+ uint32_t version = 0, flags = 0;
+ struct cros_ec_dev *ec = container_of(dev,
+ struct cros_ec_dev, class_dev);
int ret;
ret = lb_throttle();
@@ -158,30 +185,39 @@ static ssize_t brightness_store(struct device *dev,
const char *buf, size_t count)
{
struct ec_params_lightbar *param;
- struct ec_response_lightbar *resp;
- struct cros_ec_command msg = INIT_MSG(param, resp);
+ struct cros_ec_command *msg;
int ret;
unsigned int val;
- struct cros_ec_device *ec = dev_get_drvdata(dev);
+ struct cros_ec_dev *ec = container_of(dev,
+ struct cros_ec_dev, class_dev);
if (kstrtouint(buf, 0, &val))
return -EINVAL;
- param = (struct ec_params_lightbar *)msg.outdata;
- param->cmd = LIGHTBAR_CMD_BRIGHTNESS;
- param->brightness.num = val;
+ msg = alloc_lightbar_cmd_msg(ec);
+ if (!msg)
+ return -ENOMEM;
+
+ param = (struct ec_params_lightbar *)msg->data;
+ param->cmd = LIGHTBAR_CMD_SET_BRIGHTNESS;
+ param->set_brightness.num = val;
ret = lb_throttle();
if (ret)
- return ret;
+ goto exit;
- ret = cros_ec_cmd_xfer(ec, &msg);
+ ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
if (ret < 0)
- return ret;
+ goto exit;
- if (msg.result != EC_RES_SUCCESS)
- return -EINVAL;
+ if (msg->result != EC_RES_SUCCESS) {
+ ret = -EINVAL;
+ goto exit;
+ }
- return count;
+ ret = count;
+exit:
+ kfree(msg);
+ return ret;
}
@@ -196,12 +232,16 @@ static ssize_t led_rgb_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct ec_params_lightbar *param;
- struct ec_response_lightbar *resp;
- struct cros_ec_command msg = INIT_MSG(param, resp);
- struct cros_ec_device *ec = dev_get_drvdata(dev);
+ struct cros_ec_command *msg;
+ struct cros_ec_dev *ec = container_of(dev,
+ struct cros_ec_dev, class_dev);
unsigned int val[4];
int ret, i = 0, j = 0, ok = 0;
+ msg = alloc_lightbar_cmd_msg(ec);
+ if (!msg)
+ return -ENOMEM;
+
do {
/* Skip any whitespace */
while (*buf && isspace(*buf))
@@ -215,12 +255,12 @@ static ssize_t led_rgb_store(struct device *dev, struct device_attribute *attr,
return -EINVAL;
if (i == 4) {
- param = (struct ec_params_lightbar *)msg.outdata;
- param->cmd = LIGHTBAR_CMD_RGB;
- param->rgb.led = val[0];
- param->rgb.red = val[1];
- param->rgb.green = val[2];
- param->rgb.blue = val[3];
+ param = (struct ec_params_lightbar *)msg->data;
+ param->cmd = LIGHTBAR_CMD_SET_RGB;
+ param->set_rgb.led = val[0];
+ param->set_rgb.red = val[1];
+ param->set_rgb.green = val[2];
+ param->set_rgb.blue = val[3];
/*
* Throttle only the first of every four transactions,
* so that the user can update all four LEDs at once.
@@ -231,12 +271,14 @@ static ssize_t led_rgb_store(struct device *dev, struct device_attribute *attr,
return ret;
}
- ret = cros_ec_cmd_xfer(ec, &msg);
+ ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
if (ret < 0)
- return ret;
+ goto exit;
- if (msg.result != EC_RES_SUCCESS)
- return -EINVAL;
+ if (msg->result != EC_RES_SUCCESS) {
+ ret = -EINVAL;
+ goto exit;
+ }
i = 0;
ok = 1;
@@ -248,6 +290,8 @@ static ssize_t led_rgb_store(struct device *dev, struct device_attribute *attr,
} while (*buf);
+exit:
+ kfree(msg);
return (ok && i == 0) ? count : -EINVAL;
}
@@ -261,41 +305,56 @@ static ssize_t sequence_show(struct device *dev,
{
struct ec_params_lightbar *param;
struct ec_response_lightbar *resp;
- struct cros_ec_command msg = INIT_MSG(param, resp);
+ struct cros_ec_command *msg;
int ret;
- struct cros_ec_device *ec = dev_get_drvdata(dev);
+ struct cros_ec_dev *ec = container_of(dev,
+ struct cros_ec_dev, class_dev);
+
+ msg = alloc_lightbar_cmd_msg(ec);
+ if (!msg)
+ return -ENOMEM;
- param = (struct ec_params_lightbar *)msg.outdata;
+ param = (struct ec_params_lightbar *)msg->data;
param->cmd = LIGHTBAR_CMD_GET_SEQ;
ret = lb_throttle();
if (ret)
- return ret;
+ goto exit;
- ret = cros_ec_cmd_xfer(ec, &msg);
+ ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
if (ret < 0)
- return ret;
+ goto exit;
- if (msg.result != EC_RES_SUCCESS)
- return scnprintf(buf, PAGE_SIZE,
- "ERROR: EC returned %d\n", msg.result);
+ if (msg->result != EC_RES_SUCCESS) {
+ ret = scnprintf(buf, PAGE_SIZE,
+ "ERROR: EC returned %d\n", msg->result);
+ goto exit;
+ }
- resp = (struct ec_response_lightbar *)msg.indata;
+ resp = (struct ec_response_lightbar *)msg->data;
if (resp->get_seq.num >= ARRAY_SIZE(seqname))
- return scnprintf(buf, PAGE_SIZE, "%d\n", resp->get_seq.num);
+ ret = scnprintf(buf, PAGE_SIZE, "%d\n", resp->get_seq.num);
else
- return scnprintf(buf, PAGE_SIZE, "%s\n",
- seqname[resp->get_seq.num]);
+ ret = scnprintf(buf, PAGE_SIZE, "%s\n",
+ seqname[resp->get_seq.num]);
+
+exit:
+ kfree(msg);
+ return ret;
}
static ssize_t sequence_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct ec_params_lightbar *param;
- struct ec_response_lightbar *resp;
- struct cros_ec_command msg = INIT_MSG(param, resp);
+ struct cros_ec_command *msg;
unsigned int num;
int ret, len;
- struct cros_ec_device *ec = dev_get_drvdata(dev);
+ struct cros_ec_dev *ec = container_of(dev,
+ struct cros_ec_dev, class_dev);
+
+ msg = alloc_lightbar_cmd_msg(ec);
+ if (!msg)
+ return -ENOMEM;
for (len = 0; len < count; len++)
if (!isalnum(buf[len]))
@@ -311,18 +370,18 @@ static ssize_t sequence_store(struct device *dev, struct device_attribute *attr,
return ret;
}
- param = (struct ec_params_lightbar *)msg.outdata;
+ param = (struct ec_params_lightbar *)msg->data;
param->cmd = LIGHTBAR_CMD_SEQ;
param->seq.num = num;
ret = lb_throttle();
if (ret)
return ret;
- ret = cros_ec_cmd_xfer(ec, &msg);
+ ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
if (ret < 0)
return ret;
- if (msg.result != EC_RES_SUCCESS)
+ if (msg->result != EC_RES_SUCCESS)
return -EINVAL;
return count;
@@ -343,25 +402,27 @@ static struct attribute *__lb_cmds_attrs[] = {
&dev_attr_sequence.attr,
NULL,
};
-static struct attribute_group lb_cmds_attr_group = {
- .name = "lightbar",
- .attrs = __lb_cmds_attrs,
-};
-void ec_dev_lightbar_init(struct cros_ec_device *ec)
+static umode_t cros_ec_lightbar_attrs_are_visible(struct kobject *kobj,
+ struct attribute *a, int n)
{
- int ret = 0;
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct cros_ec_dev *ec = container_of(dev,
+ struct cros_ec_dev, class_dev);
+ struct platform_device *pdev = container_of(ec->dev,
+ struct platform_device, dev);
+ if (pdev->id != 0)
+ return 0;
/* Only instantiate this stuff if the EC has a lightbar */
- if (!get_lightbar_version(ec, NULL, NULL))
- return;
-
- ret = sysfs_create_group(&ec->vdev->kobj, &lb_cmds_attr_group);
- if (ret)
- pr_warn("sysfs_create_group() failed: %d\n", ret);
+ if (get_lightbar_version(ec, NULL, NULL))
+ return a->mode;
+ else
+ return 0;
}
-void ec_dev_lightbar_remove(struct cros_ec_device *ec)
-{
- sysfs_remove_group(&ec->vdev->kobj, &lb_cmds_attr_group);
-}
+struct attribute_group cros_ec_lightbar_attr_group = {
+ .name = "lightbar",
+ .attrs = __lb_cmds_attrs,
+ .is_visible = cros_ec_lightbar_attrs_are_visible,
+};
diff --git a/drivers/platform/chrome/cros_ec_lpc.c b/drivers/platform/chrome/cros_ec_lpc.c
index 8f9ac4d7bbd0..bdd77ce45f05 100644
--- a/drivers/platform/chrome/cros_ec_lpc.c
+++ b/drivers/platform/chrome/cros_ec_lpc.c
@@ -46,6 +46,77 @@ static int ec_response_timed_out(void)
return 1;
}
+static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec,
+ struct cros_ec_command *msg)
+{
+ struct ec_host_request *request;
+ struct ec_host_response response;
+ u8 sum = 0;
+ int i;
+ int ret = 0;
+ u8 *dout;
+
+ ret = cros_ec_prepare_tx(ec, msg);
+
+ /* Write buffer */
+ for (i = 0; i < ret; i++)
+ outb(ec->dout[i], EC_LPC_ADDR_HOST_PACKET + i);
+
+ request = (struct ec_host_request *)ec->dout;
+
+ /* Here we go */
+ outb(EC_COMMAND_PROTOCOL_3, EC_LPC_ADDR_HOST_CMD);
+
+ if (ec_response_timed_out()) {
+ dev_warn(ec->dev, "EC responsed timed out\n");
+ ret = -EIO;
+ goto done;
+ }
+
+ /* Check result */
+ msg->result = inb(EC_LPC_ADDR_HOST_DATA);
+ ret = cros_ec_check_result(ec, msg);
+ if (ret)
+ goto done;
+
+ /* Read back response */
+ dout = (u8 *)&response;
+ for (i = 0; i < sizeof(response); i++) {
+ dout[i] = inb(EC_LPC_ADDR_HOST_PACKET + i);
+ sum += dout[i];
+ }
+
+ msg->result = response.result;
+
+ if (response.data_len > msg->insize) {
+ dev_err(ec->dev,
+ "packet too long (%d bytes, expected %d)",
+ response.data_len, msg->insize);
+ ret = -EMSGSIZE;
+ goto done;
+ }
+
+ /* Read response and process checksum */
+ for (i = 0; i < response.data_len; i++) {
+ msg->data[i] =
+ inb(EC_LPC_ADDR_HOST_PACKET + sizeof(response) + i);
+ sum += msg->data[i];
+ }
+
+ if (sum) {
+ dev_err(ec->dev,
+ "bad packet checksum %02x\n",
+ response.checksum);
+ ret = -EBADMSG;
+ goto done;
+ }
+
+ /* Return actual amount of data received */
+ ret = response.data_len;
+done:
+ return ret;
+}
+
static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
struct cros_ec_command *msg)
{
@@ -73,8 +144,8 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
/* Copy data and update checksum */
for (i = 0; i < msg->outsize; i++) {
- outb(msg->outdata[i], EC_LPC_ADDR_HOST_PARAM + i);
- csum += msg->outdata[i];
+ outb(msg->data[i], EC_LPC_ADDR_HOST_PARAM + i);
+ csum += msg->data[i];
}
/* Finalize checksum and write args */
@@ -129,8 +200,8 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
/* Read response and update checksum */
for (i = 0; i < args.data_size; i++) {
- msg->indata[i] = inb(EC_LPC_ADDR_HOST_PARAM + i);
- csum += msg->indata[i];
+ msg->data[i] = inb(EC_LPC_ADDR_HOST_PARAM + i);
+ csum += msg->data[i];
}
/* Verify checksum */
@@ -212,11 +283,13 @@ static int cros_ec_lpc_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, ec_dev);
ec_dev->dev = dev;
- ec_dev->ec_name = pdev->name;
ec_dev->phys_name = dev_name(dev);
- ec_dev->parent = dev;
ec_dev->cmd_xfer = cros_ec_cmd_xfer_lpc;
+ ec_dev->pkt_xfer = cros_ec_pkt_xfer_lpc;
ec_dev->cmd_readmem = cros_ec_lpc_readmem;
+ ec_dev->din_size = sizeof(struct ec_host_response) +
+ sizeof(struct ec_response_get_protocol_info);
+ ec_dev->dout_size = sizeof(struct ec_host_request);
ret = cros_ec_register(ec_dev);
if (ret) {
diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
new file mode 100644
index 000000000000..990308ca384f
--- /dev/null
+++ b/drivers/platform/chrome/cros_ec_proto.c
@@ -0,0 +1,382 @@
+/*
+ * ChromeOS EC communication protocol helper functions
+ *
+ * Copyright (C) 2015 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/mfd/cros_ec.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#define EC_COMMAND_RETRIES 50
+
+static int prepare_packet(struct cros_ec_device *ec_dev,
+ struct cros_ec_command *msg)
+{
+ struct ec_host_request *request;
+ u8 *out;
+ int i;
+ u8 csum = 0;
+
+ BUG_ON(ec_dev->proto_version != EC_HOST_REQUEST_VERSION);
+ BUG_ON(msg->outsize + sizeof(*request) > ec_dev->dout_size);
+
+ out = ec_dev->dout;
+ request = (struct ec_host_request *)out;
+ request->struct_version = EC_HOST_REQUEST_VERSION;
+ request->checksum = 0;
+ request->command = msg->command;
+ request->command_version = msg->version;
+ request->reserved = 0;
+ request->data_len = msg->outsize;
+
+ for (i = 0; i < sizeof(*request); i++)
+ csum += out[i];
+
+ /* Copy data and update checksum */
+ memcpy(out + sizeof(*request), msg->data, msg->outsize);
+ for (i = 0; i < msg->outsize; i++)
+ csum += msg->data[i];
+
+ request->checksum = -csum;
+
+ return sizeof(*request) + msg->outsize;
+}
+
+static int send_command(struct cros_ec_device *ec_dev,
+ struct cros_ec_command *msg)
+{
+ int ret;
+
+ if (ec_dev->proto_version > 2)
+ ret = ec_dev->pkt_xfer(ec_dev, msg);
+ else
+ ret = ec_dev->cmd_xfer(ec_dev, msg);
+
+ if (msg->result == EC_RES_IN_PROGRESS) {
+ int i;
+ struct cros_ec_command *status_msg;
+ struct ec_response_get_comms_status *status;
+
+ status_msg = kmalloc(sizeof(*status_msg) + sizeof(*status),
+ GFP_KERNEL);
+ if (!status_msg)
+ return -ENOMEM;
+
+ status_msg->version = 0;
+ status_msg->command = EC_CMD_GET_COMMS_STATUS;
+ status_msg->insize = sizeof(*status);
+ status_msg->outsize = 0;
+
+ /*
+ * Query the EC's status until it's no longer busy or
+ * we encounter an error.
+ */
+ for (i = 0; i < EC_COMMAND_RETRIES; i++) {
+ usleep_range(10000, 11000);
+
+ ret = ec_dev->cmd_xfer(ec_dev, status_msg);
+ if (ret < 0)
+ break;
+
+ msg->result = status_msg->result;
+ if (status_msg->result != EC_RES_SUCCESS)
+ break;
+
+ status = (struct ec_response_get_comms_status *)
+ status_msg->data;
+ if (!(status->flags & EC_COMMS_STATUS_PROCESSING))
+ break;
+ }
+
+ kfree(status_msg);
+ }
+
+ return ret;
+}
+
+int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
+ struct cros_ec_command *msg)
+{
+ u8 *out;
+ u8 csum;
+ int i;
+
+ if (ec_dev->proto_version > 2)
+ return prepare_packet(ec_dev, msg);
+
+ BUG_ON(msg->outsize > EC_PROTO2_MAX_PARAM_SIZE);
+ out = ec_dev->dout;
+ out[0] = EC_CMD_VERSION0 + msg->version;
+ out[1] = msg->command;
+ out[2] = msg->outsize;
+ csum = out[0] + out[1] + out[2];
+ for (i = 0; i < msg->outsize; i++)
+ csum += out[EC_MSG_TX_HEADER_BYTES + i] = msg->data[i];
+ out[EC_MSG_TX_HEADER_BYTES + msg->outsize] = csum;
+
+ return EC_MSG_TX_PROTO_BYTES + msg->outsize;
+}
+EXPORT_SYMBOL(cros_ec_prepare_tx);
+
+int cros_ec_check_result(struct cros_ec_device *ec_dev,
+ struct cros_ec_command *msg)
+{
+ switch (msg->result) {
+ case EC_RES_SUCCESS:
+ return 0;
+ case EC_RES_IN_PROGRESS:
+ dev_dbg(ec_dev->dev, "command 0x%02x in progress\n",
+ msg->command);
+ return -EAGAIN;
+ default:
+ dev_dbg(ec_dev->dev, "command 0x%02x returned %d\n",
+ msg->command, msg->result);
+ return 0;
+ }
+}
+EXPORT_SYMBOL(cros_ec_check_result);
+
+static int cros_ec_host_command_proto_query(struct cros_ec_device *ec_dev,
+ int devidx,
+ struct cros_ec_command *msg)
+{
+ /*
+ * Try using v3+ to query for supported protocols. If this
+ * command fails, fall back to v2. Returns the highest protocol
+ * supported by the EC.
+ * Also sets the max request/response/passthru size.
+ */
+ int ret;
+
+ if (!ec_dev->pkt_xfer)
+ return -EPROTONOSUPPORT;
+
+ memset(msg, 0, sizeof(*msg));
+ msg->command = EC_CMD_PASSTHRU_OFFSET(devidx) | EC_CMD_GET_PROTOCOL_INFO;
+ msg->insize = sizeof(struct ec_response_get_protocol_info);
+
+ ret = send_command(ec_dev, msg);
+
+ if (ret < 0) {
+ dev_dbg(ec_dev->dev,
+ "failed to check for EC[%d] protocol version: %d\n",
+ devidx, ret);
+ return ret;
+ }
+
+ if (devidx > 0 && msg->result == EC_RES_INVALID_COMMAND)
+ return -ENODEV;
+ else if (msg->result != EC_RES_SUCCESS)
+ return msg->result;
+
+ return 0;
+}
+
+static int cros_ec_host_command_proto_query_v2(struct cros_ec_device *ec_dev)
+{
+ struct cros_ec_command *msg;
+ struct ec_params_hello *hello_params;
+ struct ec_response_hello *hello_response;
+ int ret;
+ int len = max(sizeof(*hello_params), sizeof(*hello_response));
+
+ msg = kmalloc(sizeof(*msg) + len, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ msg->version = 0;
+ msg->command = EC_CMD_HELLO;
+ hello_params = (struct ec_params_hello *)msg->data;
+ msg->outsize = sizeof(*hello_params);
+ hello_response = (struct ec_response_hello *)msg->data;
+ msg->insize = sizeof(*hello_response);
+
+ hello_params->in_data = 0xa0b0c0d0;
+
+ ret = send_command(ec_dev, msg);
+
+ if (ret < 0) {
+ dev_dbg(ec_dev->dev,
+ "EC failed to respond to v2 hello: %d\n",
+ ret);
+ goto exit;
+ } else if (msg->result != EC_RES_SUCCESS) {
+ dev_err(ec_dev->dev,
+ "EC responded to v2 hello with error: %d\n",
+ msg->result);
+ ret = msg->result;
+ goto exit;
+ } else if (hello_response->out_data != 0xa1b2c3d4) {
+ dev_err(ec_dev->dev,
+ "EC responded to v2 hello with bad result: %u\n",
+ hello_response->out_data);
+ ret = -EBADMSG;
+ goto exit;
+ }
+
+ ret = 0;
+
+ exit:
+ kfree(msg);
+ return ret;
+}
+
+int cros_ec_query_all(struct cros_ec_device *ec_dev)
+{
+ struct device *dev = ec_dev->dev;
+ struct cros_ec_command *proto_msg;
+ struct ec_response_get_protocol_info *proto_info;
+ int ret;
+
+ proto_msg = kzalloc(sizeof(*proto_msg) + sizeof(*proto_info),
+ GFP_KERNEL);
+ if (!proto_msg)
+ return -ENOMEM;
+
+ /* First try sending with proto v3. */
+ ec_dev->proto_version = 3;
+ ret = cros_ec_host_command_proto_query(ec_dev, 0, proto_msg);
+
+ if (ret == 0) {
+ proto_info = (struct ec_response_get_protocol_info *)
+ proto_msg->data;
+ ec_dev->max_request = proto_info->max_request_packet_size -
+ sizeof(struct ec_host_request);
+ ec_dev->max_response = proto_info->max_response_packet_size -
+ sizeof(struct ec_host_response);
+ ec_dev->proto_version =
+ min(EC_HOST_REQUEST_VERSION,
+ fls(proto_info->protocol_versions) - 1);
+ dev_dbg(ec_dev->dev,
+ "using proto v%u\n",
+ ec_dev->proto_version);
+
+ ec_dev->din_size = ec_dev->max_response +
+ sizeof(struct ec_host_response) +
+ EC_MAX_RESPONSE_OVERHEAD;
+ ec_dev->dout_size = ec_dev->max_request +
+ sizeof(struct ec_host_request) +
+ EC_MAX_REQUEST_OVERHEAD;
+
+ /*
+ * Check for PD
+ */
+ ret = cros_ec_host_command_proto_query(ec_dev, 1, proto_msg);
+
+ if (ret) {
+ dev_dbg(ec_dev->dev, "no PD chip found: %d\n", ret);
+ ec_dev->max_passthru = 0;
+ } else {
+ dev_dbg(ec_dev->dev, "found PD chip\n");
+ ec_dev->max_passthru =
+ proto_info->max_request_packet_size -
+ sizeof(struct ec_host_request);
+ }
+ } else {
+ /* Try querying with a v2 hello message. */
+ ec_dev->proto_version = 2;
+ ret = cros_ec_host_command_proto_query_v2(ec_dev);
+
+ if (ret == 0) {
+ /* V2 hello succeeded. */
+ dev_dbg(ec_dev->dev, "falling back to proto v2\n");
+
+ ec_dev->max_request = EC_PROTO2_MAX_PARAM_SIZE;
+ ec_dev->max_response = EC_PROTO2_MAX_PARAM_SIZE;
+ ec_dev->max_passthru = 0;
+ ec_dev->pkt_xfer = NULL;
+ ec_dev->din_size = EC_MSG_BYTES;
+ ec_dev->dout_size = EC_MSG_BYTES;
+ } else {
+ /*
+ * It's possible for a test to occur too early when
+ * the EC isn't listening. If this happens, we'll
+ * test later when the first command is run.
+ */
+ ec_dev->proto_version = EC_PROTO_VERSION_UNKNOWN;
+ dev_dbg(ec_dev->dev, "EC query failed: %d\n", ret);
+ goto exit;
+ }
+ }
+
+ devm_kfree(dev, ec_dev->din);
+ devm_kfree(dev, ec_dev->dout);
+
+ ec_dev->din = devm_kzalloc(dev, ec_dev->din_size, GFP_KERNEL);
+ if (!ec_dev->din) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+
+ ec_dev->dout = devm_kzalloc(dev, ec_dev->dout_size, GFP_KERNEL);
+ if (!ec_dev->dout) {
+ devm_kfree(dev, ec_dev->din);
+ ret = -ENOMEM;
+ goto exit;
+ }
+
+exit:
+ kfree(proto_msg);
+ return ret;
+}
+EXPORT_SYMBOL(cros_ec_query_all);
+
+int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
+ struct cros_ec_command *msg)
+{
+ int ret;
+
+ mutex_lock(&ec_dev->lock);
+ if (ec_dev->proto_version == EC_PROTO_VERSION_UNKNOWN) {
+ ret = cros_ec_query_all(ec_dev);
+ if (ret) {
+ dev_err(ec_dev->dev,
+ "EC version unknown and query failed; aborting command\n");
+ mutex_unlock(&ec_dev->lock);
+ return ret;
+ }
+ }
+
+ if (msg->insize > ec_dev->max_response) {
+ dev_dbg(ec_dev->dev, "clamping message receive buffer\n");
+ msg->insize = ec_dev->max_response;
+ }
+
+ if (msg->command < EC_CMD_PASSTHRU_OFFSET(1)) {
+ if (msg->outsize > ec_dev->max_request) {
+ dev_err(ec_dev->dev,
+ "request of size %u is too big (max: %u)\n",
+ msg->outsize,
+ ec_dev->max_request);
+ mutex_unlock(&ec_dev->lock);
+ return -EMSGSIZE;
+ }
+ } else {
+ if (msg->outsize > ec_dev->max_passthru) {
+ dev_err(ec_dev->dev,
+ "passthru rq of size %u is too big (max: %u)\n",
+ msg->outsize,
+ ec_dev->max_passthru);
+ mutex_unlock(&ec_dev->lock);
+ return -EMSGSIZE;
+ }
+ }
+ ret = send_command(ec_dev, msg);
+ mutex_unlock(&ec_dev->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(cros_ec_cmd_xfer);
diff --git a/drivers/platform/chrome/cros_ec_sysfs.c b/drivers/platform/chrome/cros_ec_sysfs.c
index fb62ab6cc659..f3baf9973989 100644
--- a/drivers/platform/chrome/cros_ec_sysfs.c
+++ b/drivers/platform/chrome/cros_ec_sysfs.c
@@ -29,6 +29,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/printk.h>
+#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/types.h>
#include <linux/uaccess.h>
@@ -66,13 +67,19 @@ static ssize_t store_ec_reboot(struct device *dev,
{"hibernate", EC_REBOOT_HIBERNATE, 0},
{"at-shutdown", -1, EC_REBOOT_FLAG_ON_AP_SHUTDOWN},
};
- struct cros_ec_command msg = { 0 };
- struct ec_params_reboot_ec *param =
- (struct ec_params_reboot_ec *)msg.outdata;
+ struct cros_ec_command *msg;
+ struct ec_params_reboot_ec *param;
int got_cmd = 0, offset = 0;
int i;
int ret;
- struct cros_ec_device *ec = dev_get_drvdata(dev);
+ struct cros_ec_dev *ec = container_of(dev,
+ struct cros_ec_dev, class_dev);
+
+ msg = kmalloc(sizeof(*msg) + sizeof(*param), GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ param = (struct ec_params_reboot_ec *)msg->data;
param->flags = 0;
while (1) {
@@ -100,19 +107,26 @@ static ssize_t store_ec_reboot(struct device *dev,
offset++;
}
- if (!got_cmd)
- return -EINVAL;
-
- msg.command = EC_CMD_REBOOT_EC;
- msg.outsize = sizeof(param);
- ret = cros_ec_cmd_xfer(ec, &msg);
- if (ret < 0)
- return ret;
- if (msg.result != EC_RES_SUCCESS) {
- dev_dbg(ec->dev, "EC result %d\n", msg.result);
- return -EINVAL;
+ if (!got_cmd) {
+ count = -EINVAL;
+ goto exit;
}
+ msg->version = 0;
+ msg->command = EC_CMD_REBOOT_EC + ec->cmd_offset;
+ msg->outsize = sizeof(*param);
+ msg->insize = 0;
+ ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
+ if (ret < 0) {
+ count = ret;
+ goto exit;
+ }
+ if (msg->result != EC_RES_SUCCESS) {
+ dev_dbg(ec->dev, "EC result %d\n", msg->result);
+ count = -EINVAL;
+ }
+exit:
+ kfree(msg);
return count;
}
@@ -123,22 +137,33 @@ static ssize_t show_ec_version(struct device *dev,
struct ec_response_get_version *r_ver;
struct ec_response_get_chip_info *r_chip;
struct ec_response_board_version *r_board;
- struct cros_ec_command msg = { 0 };
+ struct cros_ec_command *msg;
int ret;
int count = 0;
- struct cros_ec_device *ec = dev_get_drvdata(dev);
+ struct cros_ec_dev *ec = container_of(dev,
+ struct cros_ec_dev, class_dev);
+
+ msg = kmalloc(sizeof(*msg) + EC_HOST_PARAM_SIZE, GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
/* Get versions. RW may change. */
- msg.command = EC_CMD_GET_VERSION;
- msg.insize = sizeof(*r_ver);
- ret = cros_ec_cmd_xfer(ec, &msg);
- if (ret < 0)
- return ret;
- if (msg.result != EC_RES_SUCCESS)
- return scnprintf(buf, PAGE_SIZE,
- "ERROR: EC returned %d\n", msg.result);
+ msg->version = 0;
+ msg->command = EC_CMD_GET_VERSION + ec->cmd_offset;
+ msg->insize = sizeof(*r_ver);
+ msg->outsize = 0;
+ ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
+ if (ret < 0) {
+ count = ret;
+ goto exit;
+ }
+ if (msg->result != EC_RES_SUCCESS) {
+ count = scnprintf(buf, PAGE_SIZE,
+ "ERROR: EC returned %d\n", msg->result);
+ goto exit;
+ }
- r_ver = (struct ec_response_get_version *)msg.indata;
+ r_ver = (struct ec_response_get_version *)msg->data;
/* Strings should be null-terminated, but let's be sure. */
r_ver->version_string_ro[sizeof(r_ver->version_string_ro) - 1] = '\0';
r_ver->version_string_rw[sizeof(r_ver->version_string_rw) - 1] = '\0';
@@ -152,33 +177,33 @@ static ssize_t show_ec_version(struct device *dev,
image_names[r_ver->current_image] : "?"));
/* Get build info. */
- msg.command = EC_CMD_GET_BUILD_INFO;
- msg.insize = sizeof(msg.indata);
- ret = cros_ec_cmd_xfer(ec, &msg);
+ msg->command = EC_CMD_GET_BUILD_INFO + ec->cmd_offset;
+ msg->insize = EC_HOST_PARAM_SIZE;
+ ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
if (ret < 0)
count += scnprintf(buf + count, PAGE_SIZE - count,
"Build info: XFER ERROR %d\n", ret);
- else if (msg.result != EC_RES_SUCCESS)
+ else if (msg->result != EC_RES_SUCCESS)
count += scnprintf(buf + count, PAGE_SIZE - count,
- "Build info: EC error %d\n", msg.result);
+ "Build info: EC error %d\n", msg->result);
else {
- msg.indata[sizeof(msg.indata) - 1] = '\0';
+ msg->data[sizeof(msg->data) - 1] = '\0';
count += scnprintf(buf + count, PAGE_SIZE - count,
- "Build info: %s\n", msg.indata);
+ "Build info: %s\n", msg->data);
}
/* Get chip info. */
- msg.command = EC_CMD_GET_CHIP_INFO;
- msg.insize = sizeof(*r_chip);
- ret = cros_ec_cmd_xfer(ec, &msg);
+ msg->command = EC_CMD_GET_CHIP_INFO + ec->cmd_offset;
+ msg->insize = sizeof(*r_chip);
+ ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
if (ret < 0)
count += scnprintf(buf + count, PAGE_SIZE - count,
"Chip info: XFER ERROR %d\n", ret);
- else if (msg.result != EC_RES_SUCCESS)
+ else if (msg->result != EC_RES_SUCCESS)
count += scnprintf(buf + count, PAGE_SIZE - count,
- "Chip info: EC error %d\n", msg.result);
+ "Chip info: EC error %d\n", msg->result);
else {
- r_chip = (struct ec_response_get_chip_info *)msg.indata;
+ r_chip = (struct ec_response_get_chip_info *)msg->data;
r_chip->vendor[sizeof(r_chip->vendor) - 1] = '\0';
r_chip->name[sizeof(r_chip->name) - 1] = '\0';
@@ -192,23 +217,25 @@ static ssize_t show_ec_version(struct device *dev,
}
/* Get board version */
- msg.command = EC_CMD_GET_BOARD_VERSION;
- msg.insize = sizeof(*r_board);
- ret = cros_ec_cmd_xfer(ec, &msg);
+ msg->command = EC_CMD_GET_BOARD_VERSION + ec->cmd_offset;
+ msg->insize = sizeof(*r_board);
+ ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
if (ret < 0)
count += scnprintf(buf + count, PAGE_SIZE - count,
"Board version: XFER ERROR %d\n", ret);
- else if (msg.result != EC_RES_SUCCESS)
+ else if (msg->result != EC_RES_SUCCESS)
count += scnprintf(buf + count, PAGE_SIZE - count,
- "Board version: EC error %d\n", msg.result);
+ "Board version: EC error %d\n", msg->result);
else {
- r_board = (struct ec_response_board_version *)msg.indata;
+ r_board = (struct ec_response_board_version *)msg->data;
count += scnprintf(buf + count, PAGE_SIZE - count,
"Board version: %d\n",
r_board->board_version);
}
+exit:
+ kfree(msg);
return count;
}
@@ -216,27 +243,39 @@ static ssize_t show_ec_flashinfo(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ec_response_flash_info *resp;
- struct cros_ec_command msg = { 0 };
+ struct cros_ec_command *msg;
int ret;
- struct cros_ec_device *ec = dev_get_drvdata(dev);
+ struct cros_ec_dev *ec = container_of(dev,
+ struct cros_ec_dev, class_dev);
+
+ msg = kmalloc(sizeof(*msg) + sizeof(*resp), GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
/* The flash info shouldn't ever change, but ask each time anyway. */
- msg.command = EC_CMD_FLASH_INFO;
- msg.insize = sizeof(*resp);
- ret = cros_ec_cmd_xfer(ec, &msg);
+ msg->version = 0;
+ msg->command = EC_CMD_FLASH_INFO + ec->cmd_offset;
+ msg->insize = sizeof(*resp);
+ msg->outsize = 0;
+ ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
if (ret < 0)
- return ret;
- if (msg.result != EC_RES_SUCCESS)
- return scnprintf(buf, PAGE_SIZE,
- "ERROR: EC returned %d\n", msg.result);
-
- resp = (struct ec_response_flash_info *)msg.indata;
-
- return scnprintf(buf, PAGE_SIZE,
- "FlashSize %d\nWriteSize %d\n"
- "EraseSize %d\nProtectSize %d\n",
- resp->flash_size, resp->write_block_size,
- resp->erase_block_size, resp->protect_block_size);
+ goto exit;
+ if (msg->result != EC_RES_SUCCESS) {
+ ret = scnprintf(buf, PAGE_SIZE,
+ "ERROR: EC returned %d\n", msg->result);
+ goto exit;
+ }
+
+ resp = (struct ec_response_flash_info *)msg->data;
+
+ ret = scnprintf(buf, PAGE_SIZE,
+ "FlashSize %d\nWriteSize %d\n"
+ "EraseSize %d\nProtectSize %d\n",
+ resp->flash_size, resp->write_block_size,
+ resp->erase_block_size, resp->protect_block_size);
+exit:
+ kfree(msg);
+ return ret;
}
/* Module initialization */
@@ -252,20 +291,7 @@ static struct attribute *__ec_attrs[] = {
NULL,
};
-static struct attribute_group ec_attr_group = {
+struct attribute_group cros_ec_attr_group = {
.attrs = __ec_attrs,
};
-void ec_dev_sysfs_init(struct cros_ec_device *ec)
-{
- int error;
-
- error = sysfs_create_group(&ec->vdev->kobj, &ec_attr_group);
- if (error)
- pr_warn("failed to create group: %d\n", error);
-}
-
-void ec_dev_sysfs_remove(struct cros_ec_device *ec)
-{
- sysfs_remove_group(&ec->vdev->kobj, &ec_attr_group);
-}
diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c
index d9a09d9637d9..e7a29e2750c6 100644
--- a/drivers/platform/goldfish/goldfish_pipe.c
+++ b/drivers/platform/goldfish/goldfish_pipe.c
@@ -158,8 +158,8 @@ static u32 goldfish_cmd_status(struct goldfish_pipe *pipe, u32 cmd)
struct goldfish_pipe_dev *dev = pipe->dev;
spin_lock_irqsave(&dev->lock, flags);
- gf_write64((u64)(unsigned long)pipe, dev->base + PIPE_REG_CHANNEL,
- dev->base + PIPE_REG_CHANNEL_HIGH);
+ gf_write_ptr(pipe, dev->base + PIPE_REG_CHANNEL,
+ dev->base + PIPE_REG_CHANNEL_HIGH);
writel(cmd, dev->base + PIPE_REG_COMMAND);
status = readl(dev->base + PIPE_REG_STATUS);
spin_unlock_irqrestore(&dev->lock, flags);
@@ -172,8 +172,8 @@ static void goldfish_cmd(struct goldfish_pipe *pipe, u32 cmd)
struct goldfish_pipe_dev *dev = pipe->dev;
spin_lock_irqsave(&dev->lock, flags);
- gf_write64((u64)(unsigned long)pipe, dev->base + PIPE_REG_CHANNEL,
- dev->base + PIPE_REG_CHANNEL_HIGH);
+ gf_write_ptr(pipe, dev->base + PIPE_REG_CHANNEL,
+ dev->base + PIPE_REG_CHANNEL_HIGH);
writel(cmd, dev->base + PIPE_REG_COMMAND);
spin_unlock_irqrestore(&dev->lock, flags);
}
@@ -282,7 +282,7 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
return -EIO;
/* Null reads or writes succeeds */
- if (unlikely(bufflen) == 0)
+ if (unlikely(bufflen == 0))
return 0;
/* Check the buffer range for access */
@@ -327,12 +327,12 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
spin_lock_irqsave(&dev->lock, irq_flags);
if (access_with_param(dev, CMD_WRITE_BUFFER + cmd_offset,
address, avail, pipe, &status)) {
- gf_write64((u64)(unsigned long)pipe,
- dev->base + PIPE_REG_CHANNEL,
- dev->base + PIPE_REG_CHANNEL_HIGH);
+ gf_write_ptr(pipe, dev->base + PIPE_REG_CHANNEL,
+ dev->base + PIPE_REG_CHANNEL_HIGH);
writel(avail, dev->base + PIPE_REG_SIZE);
- gf_write64(address, dev->base + PIPE_REG_ADDRESS,
- dev->base + PIPE_REG_ADDRESS_HIGH);
+ gf_write_ptr((void *)address,
+ dev->base + PIPE_REG_ADDRESS,
+ dev->base + PIPE_REG_ADDRESS_HIGH);
writel(CMD_WRITE_BUFFER + cmd_offset,
dev->base + PIPE_REG_COMMAND);
status = readl(dev->base + PIPE_REG_STATUS);
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index f9f205cb1f11..1e2f57f6d297 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -71,9 +71,10 @@ config ASUS_LAPTOP
depends on ACPI
select LEDS_CLASS
select NEW_LEDS
- select BACKLIGHT_CLASS_DEVICE
+ depends on BACKLIGHT_CLASS_DEVICE
depends on INPUT
depends on RFKILL || RFKILL = n
+ depends on ACPI_VIDEO || ACPI_VIDEO = n
select INPUT_SPARSEKMAP
select INPUT_POLLDEV
---help---
@@ -95,6 +96,7 @@ config DELL_LAPTOP
depends on X86
depends on DCDBAS
depends on BACKLIGHT_CLASS_DEVICE
+ depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on RFKILL || RFKILL = n
depends on SERIO_I8042
select POWER_SUPPLY
@@ -109,6 +111,7 @@ config DELL_WMI
tristate "Dell WMI extras"
depends on ACPI_WMI
depends on INPUT
+ depends on ACPI_VIDEO || ACPI_VIDEO = n
select INPUT_SPARSEKMAP
---help---
Say Y here if you want to support WMI-based hotkeys on Dell laptops.
@@ -138,12 +141,29 @@ config DELL_SMO8800
To compile this driver as a module, choose M here: the module will
be called dell-smo8800.
+config DELL_RBTN
+ tristate "Dell Airplane Mode Switch driver"
+ depends on ACPI
+ depends on INPUT
+ depends on RFKILL
+ ---help---
+ Say Y here if you want to support Dell Airplane Mode Switch ACPI
+ device on Dell laptops. Sometimes it has names: DELLABCE or DELRBTN.
+ This driver register rfkill device or input hotkey device depending
+ on hardware type (hw switch slider or keyboard toggle button). For
+ rfkill devices it receive HW switch events and set correct hard
+ rfkill state.
+
+ To compile this driver as a module, choose M here: the module will
+ be called dell-rbtn.
+
config FUJITSU_LAPTOP
tristate "Fujitsu Laptop Extras"
depends on ACPI
depends on INPUT
depends on BACKLIGHT_CLASS_DEVICE
+ depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on LEDS_CLASS || LEDS_CLASS=n
---help---
This is a driver for laptops built by Fujitsu:
@@ -247,6 +267,7 @@ config MSI_LAPTOP
tristate "MSI Laptop Extras"
depends on ACPI
depends on BACKLIGHT_CLASS_DEVICE
+ depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on RFKILL
depends on INPUT && SERIO_I8042
select INPUT_SPARSEKMAP
@@ -280,6 +301,7 @@ config COMPAL_LAPTOP
tristate "Compal (and others) Laptop Extras"
depends on ACPI
depends on BACKLIGHT_CLASS_DEVICE
+ depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on RFKILL
depends on HWMON
depends on POWER_SUPPLY
@@ -296,7 +318,8 @@ config COMPAL_LAPTOP
config SONY_LAPTOP
tristate "Sony Laptop Extras"
depends on ACPI
- select BACKLIGHT_CLASS_DEVICE
+ depends on ACPI_VIDEO || ACPI_VIDEO = n
+ depends on BACKLIGHT_CLASS_DEVICE
depends on INPUT
depends on RFKILL
---help---
@@ -321,6 +344,7 @@ config IDEAPAD_LAPTOP
depends on RFKILL && INPUT
depends on SERIO_I8042
depends on BACKLIGHT_CLASS_DEVICE
+ depends on ACPI_VIDEO || ACPI_VIDEO = n
select INPUT_SPARSEKMAP
help
This is a driver for Lenovo IdeaPad netbooks contains drivers for
@@ -331,8 +355,8 @@ config THINKPAD_ACPI
depends on ACPI
depends on INPUT
depends on RFKILL || RFKILL = n
- select BACKLIGHT_LCD_SUPPORT
- select BACKLIGHT_CLASS_DEVICE
+ depends on ACPI_VIDEO || ACPI_VIDEO = n
+ depends on BACKLIGHT_CLASS_DEVICE
select HWMON
select NVRAM
select NEW_LEDS
@@ -500,8 +524,9 @@ config EEEPC_LAPTOP
depends on ACPI
depends on INPUT
depends on RFKILL || RFKILL = n
+ depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on HOTPLUG_PCI
- select BACKLIGHT_CLASS_DEVICE
+ depends on BACKLIGHT_CLASS_DEVICE
select HWMON
select LEDS_CLASS
select NEW_LEDS
@@ -587,6 +612,7 @@ config MSI_WMI
depends on ACPI_WMI
depends on INPUT
depends on BACKLIGHT_CLASS_DEVICE
+ depends on ACPI_VIDEO || ACPI_VIDEO = n
select INPUT_SPARSEKMAP
help
Say Y here if you want to support WMI-based hotkeys on MSI laptops.
@@ -612,7 +638,6 @@ config ACPI_TOSHIBA
select NEW_LEDS
depends on BACKLIGHT_CLASS_DEVICE
depends on INPUT
- depends on RFKILL || RFKILL = n
depends on SERIO_I8042 || SERIO_I8042 = n
depends on ACPI_VIDEO || ACPI_VIDEO = n
select INPUT_POLLDEV
@@ -643,6 +668,7 @@ config ACPI_TOSHIBA
config TOSHIBA_BT_RFKILL
tristate "Toshiba Bluetooth RFKill switch support"
depends on ACPI
+ depends on RFKILL || RFKILL = n
---help---
This driver adds support for Bluetooth events for the RFKill
switch on modern Toshiba laptops with full ACPI support and
@@ -660,7 +686,7 @@ config TOSHIBA_HAPS
depends on ACPI
---help---
This driver adds support for the built-in accelerometer
- found on recent Toshiba laptops equiped with HID TOS620A
+ found on recent Toshiba laptops equipped with HID TOS620A
device.
This driver receives ACPI notify events 0x80 when the sensor
@@ -669,7 +695,7 @@ config TOSHIBA_HAPS
been stabilized.
Also provides sysfs entries to get/set the desired protection
- level and reseting the HDD protection interface.
+ level and resetting the HDD protection interface.
If you have a recent Toshiba laptop with a built-in accelerometer
device, say Y.
@@ -824,6 +850,7 @@ config MXM_WMI
config INTEL_OAKTRAIL
tristate "Intel Oaktrail Platform Extras"
depends on ACPI
+ depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on RFKILL && BACKLIGHT_CLASS_DEVICE && ACPI
---help---
Intel Oaktrail platform need this driver to provide interfaces to
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index f82232b1fc4d..b3e54ed863c3 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o
obj-$(CONFIG_DELL_WMI) += dell-wmi.o
obj-$(CONFIG_DELL_WMI_AIO) += dell-wmi-aio.o
obj-$(CONFIG_DELL_SMO8800) += dell-smo8800.o
+obj-$(CONFIG_DELL_RBTN) += dell-rbtn.o
obj-$(CONFIG_ACER_WMI) += acer-wmi.o
obj-$(CONFIG_ACERHDF) += acerhdf.o
obj-$(CONFIG_HP_ACCEL) += hp_accel.o
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 3ac29a1e8f92..f6b280dbfb33 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -2246,14 +2246,10 @@ static int __init acer_wmi_init(void)
set_quirks();
if (dmi_check_system(video_vendor_dmi_table))
- acpi_video_dmi_promote_vendor();
- if (acpi_video_backlight_support()) {
+ acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
+
+ if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
interface->capability &= ~ACER_CAP_BRIGHTNESS;
- pr_info("Brightness must be controlled by acpi video driver\n");
- } else {
- pr_info("Disabling ACPI video driver\n");
- acpi_video_unregister_backlight();
- }
if (wmi_has_guid(WMID_GUID3)) {
if (ec_raw_mode) {
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 594c918b553d..1ef02daddb60 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -372,7 +372,8 @@ static int acerhdf_bind(struct thermal_zone_device *thermal,
return 0;
if (thermal_zone_bind_cooling_device(thermal, 0, cdev,
- THERMAL_NO_LIMIT, THERMAL_NO_LIMIT)) {
+ THERMAL_NO_LIMIT, THERMAL_NO_LIMIT,
+ THERMAL_WEIGHT_DEFAULT)) {
pr_err("error binding cooling dev\n");
return -EINVAL;
}
diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c
index 6808715003f6..0dec3f59917a 100644
--- a/drivers/platform/x86/apple-gmux.c
+++ b/drivers/platform/x86/apple-gmux.c
@@ -550,8 +550,7 @@ static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
* backlight control and supports more levels than other options.
* Disable the other backlight choices.
*/
- acpi_video_dmi_promote_vendor();
- acpi_video_unregister();
+ acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
apple_bl_unregister();
gmux_data->power_state = VGA_SWITCHEROO_ON;
@@ -645,7 +644,6 @@ static void gmux_remove(struct pnp_dev *pnp)
apple_gmux_data = NULL;
kfree(gmux_data);
- acpi_video_dmi_demote_vendor();
acpi_video_register();
apple_bl_register();
}
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index 46b274693872..58d29c4f2840 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -54,6 +54,7 @@
#include <linux/slab.h>
#include <linux/dmi.h>
#include <linux/acpi.h>
+#include <acpi/video.h>
#define ASUS_LAPTOP_VERSION "0.42"
@@ -1884,12 +1885,11 @@ static int asus_acpi_add(struct acpi_device *device)
if (result)
goto fail_platform;
- if (!acpi_video_backlight_support()) {
+ if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
result = asus_backlight_init(asus);
if (result)
goto fail_backlight;
- } else
- pr_info("Backlight controlled by ACPI video driver\n");
+ }
result = asus_input_init(asus);
if (result)
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 7543a56e0f45..efbc3f0c592b 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -78,6 +78,7 @@ MODULE_LICENSE("GPL");
#define ASUS_WMI_METHODID_GPID 0x44495047 /* Get Panel ID?? (Resol) */
#define ASUS_WMI_METHODID_QMOD 0x444F4D51 /* Quiet MODe */
#define ASUS_WMI_METHODID_SPLV 0x4C425053 /* Set Panel Light Value */
+#define ASUS_WMI_METHODID_AGFN 0x4E464741 /* FaN? */
#define ASUS_WMI_METHODID_SFUN 0x4E554653 /* FUNCtionalities */
#define ASUS_WMI_METHODID_SDSP 0x50534453 /* Set DiSPlay output */
#define ASUS_WMI_METHODID_GDSP 0x50534447 /* Get DiSPlay output */
@@ -150,12 +151,38 @@ MODULE_LICENSE("GPL");
#define ASUS_WMI_DSTS_BRIGHTNESS_MASK 0x000000FF
#define ASUS_WMI_DSTS_MAX_BRIGTH_MASK 0x0000FF00
+#define ASUS_FAN_DESC "cpu_fan"
+#define ASUS_FAN_MFUN 0x13
+#define ASUS_FAN_SFUN_READ 0x06
+#define ASUS_FAN_SFUN_WRITE 0x07
+#define ASUS_FAN_CTRL_MANUAL 1
+#define ASUS_FAN_CTRL_AUTO 2
+
struct bios_args {
u32 arg0;
u32 arg1;
} __packed;
/*
+ * Struct that's used for all methods called via AGFN. Naming is
+ * identically to the AML code.
+ */
+struct agfn_args {
+ u16 mfun; /* probably "Multi-function" to be called */
+ u16 sfun; /* probably "Sub-function" to be called */
+ u16 len; /* size of the hole struct, including subfunction fields */
+ u8 stas; /* not used by now */
+ u8 err; /* zero on success */
+} __packed;
+
+/* struct used for calling fan read and write methods */
+struct fan_args {
+ struct agfn_args agfn; /* common fields */
+ u8 fan; /* fan number: 0: set auto mode 1: 1st fan */
+ u32 speed; /* read: RPM/100 - write: 0-255 */
+} __packed;
+
+/*
* <platform>/ - debugfs root directory
* dev_id - current dev_id
* ctrl_param - current ctrl_param
@@ -204,6 +231,10 @@ struct asus_wmi {
struct asus_rfkill gps;
struct asus_rfkill uwb;
+ bool asus_hwmon_fan_manual_mode;
+ int asus_hwmon_num_fans;
+ int asus_hwmon_pwm;
+
struct hotplug_slot *hotplug_slot;
struct mutex hotplug_lock;
struct mutex wmi_lock;
@@ -294,6 +325,36 @@ exit:
return 0;
}
+static int asus_wmi_evaluate_method_agfn(const struct acpi_buffer args)
+{
+ struct acpi_buffer input;
+ u64 phys_addr;
+ u32 retval;
+ u32 status = -1;
+
+ /*
+ * Copy to dma capable address otherwise memory corruption occurs as
+ * bios has to be able to access it.
+ */
+ input.pointer = kzalloc(args.length, GFP_DMA | GFP_KERNEL);
+ input.length = args.length;
+ if (!input.pointer)
+ return -ENOMEM;
+ phys_addr = virt_to_phys(input.pointer);
+ memcpy(input.pointer, args.pointer, args.length);
+
+ status = asus_wmi_evaluate_method(ASUS_WMI_METHODID_AGFN,
+ phys_addr, 0, &retval);
+ if (!status)
+ memcpy(args.pointer, input.pointer, args.length);
+
+ kfree(input.pointer);
+ if (status)
+ return -ENXIO;
+
+ return retval;
+}
+
static int asus_wmi_get_devstate(struct asus_wmi *asus, u32 dev_id, u32 *retval)
{
return asus_wmi_evaluate_method(asus->dsts_id, dev_id, 0, retval);
@@ -1022,35 +1083,228 @@ exit:
/*
* Hwmon device
*/
-static ssize_t asus_hwmon_pwm1(struct device *dev,
- struct device_attribute *attr,
- char *buf)
+static int asus_hwmon_agfn_fan_speed_read(struct asus_wmi *asus, int fan,
+ int *speed)
+{
+ struct fan_args args = {
+ .agfn.len = sizeof(args),
+ .agfn.mfun = ASUS_FAN_MFUN,
+ .agfn.sfun = ASUS_FAN_SFUN_READ,
+ .fan = fan,
+ .speed = 0,
+ };
+ struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
+ int status;
+
+ if (fan != 1)
+ return -EINVAL;
+
+ status = asus_wmi_evaluate_method_agfn(input);
+
+ if (status || args.agfn.err)
+ return -ENXIO;
+
+ if (speed)
+ *speed = args.speed;
+
+ return 0;
+}
+
+static int asus_hwmon_agfn_fan_speed_write(struct asus_wmi *asus, int fan,
+ int *speed)
+{
+ struct fan_args args = {
+ .agfn.len = sizeof(args),
+ .agfn.mfun = ASUS_FAN_MFUN,
+ .agfn.sfun = ASUS_FAN_SFUN_WRITE,
+ .fan = fan,
+ .speed = speed ? *speed : 0,
+ };
+ struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
+ int status;
+
+ /* 1: for setting 1st fan's speed 0: setting auto mode */
+ if (fan != 1 && fan != 0)
+ return -EINVAL;
+
+ status = asus_wmi_evaluate_method_agfn(input);
+
+ if (status || args.agfn.err)
+ return -ENXIO;
+
+ if (speed && fan == 1)
+ asus->asus_hwmon_pwm = *speed;
+
+ return 0;
+}
+
+/*
+ * Check if we can read the speed of one fan. If true we assume we can also
+ * control it.
+ */
+static int asus_hwmon_get_fan_number(struct asus_wmi *asus, int *num_fans)
+{
+ int status;
+ int speed = 0;
+
+ *num_fans = 0;
+
+ status = asus_hwmon_agfn_fan_speed_read(asus, 1, &speed);
+ if (!status)
+ *num_fans = 1;
+
+ return 0;
+}
+
+static int asus_hwmon_fan_set_auto(struct asus_wmi *asus)
+{
+ int status;
+
+ status = asus_hwmon_agfn_fan_speed_write(asus, 0, NULL);
+ if (status)
+ return -ENXIO;
+
+ asus->asus_hwmon_fan_manual_mode = false;
+
+ return 0;
+}
+
+static int asus_hwmon_fan_rpm_show(struct device *dev, int fan)
{
struct asus_wmi *asus = dev_get_drvdata(dev);
- u32 value;
+ int value;
+ int ret;
+
+ /* no speed readable on manual mode */
+ if (asus->asus_hwmon_fan_manual_mode)
+ return -ENXIO;
+
+ ret = asus_hwmon_agfn_fan_speed_read(asus, fan+1, &value);
+ if (ret) {
+ pr_warn("reading fan speed failed: %d\n", ret);
+ return -ENXIO;
+ }
+
+ return value;
+}
+
+static void asus_hwmon_pwm_show(struct asus_wmi *asus, int fan, int *value)
+{
int err;
- err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_FAN_CTRL, &value);
+ if (asus->asus_hwmon_pwm >= 0) {
+ *value = asus->asus_hwmon_pwm;
+ return;
+ }
+ err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_FAN_CTRL, value);
if (err < 0)
- return err;
+ return;
- value &= 0xFF;
-
- if (value == 1) /* Low Speed */
- value = 85;
- else if (value == 2)
- value = 170;
- else if (value == 3)
- value = 255;
- else if (value != 0) {
- pr_err("Unknown fan speed %#x\n", value);
- value = -1;
+ *value &= 0xFF;
+
+ if (*value == 1) /* Low Speed */
+ *value = 85;
+ else if (*value == 2)
+ *value = 170;
+ else if (*value == 3)
+ *value = 255;
+ else if (*value) {
+ pr_err("Unknown fan speed %#x\n", *value);
+ *value = -1;
}
+}
+
+static ssize_t pwm1_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ int value;
+
+ asus_hwmon_pwm_show(asus, 0, &value);
return sprintf(buf, "%d\n", value);
}
+static ssize_t pwm1_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count) {
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ int value;
+ int state;
+ int ret;
+
+ ret = kstrtouint(buf, 10, &value);
+
+ if (ret)
+ return ret;
+
+ value = clamp(value, 0, 255);
+
+ state = asus_hwmon_agfn_fan_speed_write(asus, 1, &value);
+ if (state)
+ pr_warn("Setting fan speed failed: %d\n", state);
+ else
+ asus->asus_hwmon_fan_manual_mode = true;
+
+ return count;
+}
+
+static ssize_t fan1_input_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int value = asus_hwmon_fan_rpm_show(dev, 0);
+
+ return sprintf(buf, "%d\n", value < 0 ? -1 : value*100);
+
+}
+
+static ssize_t pwm1_enable_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+
+ if (asus->asus_hwmon_fan_manual_mode)
+ return sprintf(buf, "%d\n", ASUS_FAN_CTRL_MANUAL);
+
+ return sprintf(buf, "%d\n", ASUS_FAN_CTRL_AUTO);
+}
+
+static ssize_t pwm1_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct asus_wmi *asus = dev_get_drvdata(dev);
+ int status = 0;
+ int state;
+ int ret;
+
+ ret = kstrtouint(buf, 10, &state);
+
+ if (ret)
+ return ret;
+
+ if (state == ASUS_FAN_CTRL_MANUAL)
+ asus->asus_hwmon_fan_manual_mode = true;
+ else
+ status = asus_hwmon_fan_set_auto(asus);
+
+ if (status)
+ return status;
+
+ return count;
+}
+
+static ssize_t fan1_label_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%s\n", ASUS_FAN_DESC);
+}
+
static ssize_t asus_hwmon_temp1(struct device *dev,
struct device_attribute *attr,
char *buf)
@@ -1069,11 +1323,21 @@ static ssize_t asus_hwmon_temp1(struct device *dev,
return sprintf(buf, "%d\n", value);
}
-static DEVICE_ATTR(pwm1, S_IRUGO, asus_hwmon_pwm1, NULL);
+/* Fan1 */
+static DEVICE_ATTR_RW(pwm1);
+static DEVICE_ATTR_RW(pwm1_enable);
+static DEVICE_ATTR_RO(fan1_input);
+static DEVICE_ATTR_RO(fan1_label);
+
+/* Temperature */
static DEVICE_ATTR(temp1_input, S_IRUGO, asus_hwmon_temp1, NULL);
static struct attribute *hwmon_attributes[] = {
&dev_attr_pwm1.attr,
+ &dev_attr_pwm1_enable.attr,
+ &dev_attr_fan1_input.attr,
+ &dev_attr_fan1_label.attr,
+
&dev_attr_temp1_input.attr,
NULL
};
@@ -1084,19 +1348,28 @@ static umode_t asus_hwmon_sysfs_is_visible(struct kobject *kobj,
struct device *dev = container_of(kobj, struct device, kobj);
struct platform_device *pdev = to_platform_device(dev->parent);
struct asus_wmi *asus = platform_get_drvdata(pdev);
- bool ok = true;
int dev_id = -1;
+ int fan_attr = -1;
u32 value = ASUS_WMI_UNSUPPORTED_METHOD;
+ bool ok = true;
if (attr == &dev_attr_pwm1.attr)
dev_id = ASUS_WMI_DEVID_FAN_CTRL;
else if (attr == &dev_attr_temp1_input.attr)
dev_id = ASUS_WMI_DEVID_THERMAL_CTRL;
+
+ if (attr == &dev_attr_fan1_input.attr
+ || attr == &dev_attr_fan1_label.attr
+ || attr == &dev_attr_pwm1.attr
+ || attr == &dev_attr_pwm1_enable.attr) {
+ fan_attr = 1;
+ }
+
if (dev_id != -1) {
int err = asus_wmi_get_devstate(asus, dev_id, &value);
- if (err < 0)
+ if (err < 0 && fan_attr == -1)
return 0; /* can't return negative here */
}
@@ -1112,10 +1385,16 @@ static umode_t asus_hwmon_sysfs_is_visible(struct kobject *kobj,
if (value == ASUS_WMI_UNSUPPORTED_METHOD || value & 0xFFF80000
|| (!asus->sfun && !(value & ASUS_WMI_DSTS_PRESENCE_BIT)))
ok = false;
+ else
+ ok = fan_attr <= asus->asus_hwmon_num_fans;
} else if (dev_id == ASUS_WMI_DEVID_THERMAL_CTRL) {
/* If value is zero, something is clearly wrong */
- if (value == 0)
+ if (!value)
ok = false;
+ } else if (fan_attr <= asus->asus_hwmon_num_fans && fan_attr != -1) {
+ ok = true;
+ } else {
+ ok = false;
}
return ok ? attr->mode : 0;
@@ -1364,7 +1643,7 @@ static void asus_wmi_notify(u32 value, void *context)
code = ASUS_WMI_BRN_DOWN;
if (code == ASUS_WMI_BRN_DOWN || code == ASUS_WMI_BRN_UP) {
- if (!acpi_video_backlight_support()) {
+ if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
asus_wmi_backlight_notify(asus, orig_code);
goto exit;
}
@@ -1723,6 +2002,25 @@ error_debugfs:
return -ENOMEM;
}
+static int asus_wmi_fan_init(struct asus_wmi *asus)
+{
+ int status;
+
+ asus->asus_hwmon_pwm = -1;
+ asus->asus_hwmon_num_fans = -1;
+ asus->asus_hwmon_fan_manual_mode = false;
+
+ status = asus_hwmon_get_fan_number(asus, &asus->asus_hwmon_num_fans);
+ if (status) {
+ asus->asus_hwmon_num_fans = 0;
+ pr_warn("Could not determine number of fans: %d\n", status);
+ return -ENXIO;
+ }
+
+ pr_info("Number of fans: %d\n", asus->asus_hwmon_num_fans);
+ return 0;
+}
+
/*
* WMI Driver
*/
@@ -1756,6 +2054,9 @@ static int asus_wmi_add(struct platform_device *pdev)
if (err)
goto fail_input;
+ err = asus_wmi_fan_init(asus); /* probably no problems on error */
+ asus_hwmon_fan_set_auto(asus);
+
err = asus_wmi_hwmon_init(asus);
if (err)
goto fail_hwmon;
@@ -1772,17 +2073,16 @@ static int asus_wmi_add(struct platform_device *pdev)
stop this from showing up */
chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
if (chassis_type && !strcmp(chassis_type, "3"))
- acpi_video_dmi_promote_vendor();
+ acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
+
if (asus->driver->quirks->wmi_backlight_power)
- acpi_video_dmi_promote_vendor();
- if (!acpi_video_backlight_support()) {
- pr_info("Disabling ACPI video driver\n");
- acpi_video_unregister();
+ acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
+
+ if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
err = asus_wmi_backlight_init(asus);
if (err && err != -ENODEV)
goto fail_backlight;
- } else
- pr_info("Backlight controlled by ACPI video driver\n");
+ }
status = wmi_install_notify_handler(asus->driver->event_guid,
asus_wmi_notify, asus);
@@ -1832,6 +2132,7 @@ static int asus_wmi_remove(struct platform_device *device)
asus_wmi_rfkill_exit(asus);
asus_wmi_debugfs_exit(asus);
asus_wmi_platform_exit(asus);
+ asus_hwmon_fan_set_auto(asus);
kfree(asus);
return 0;
diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c
index b4e94471f3d5..f2706d27adff 100644
--- a/drivers/platform/x86/compal-laptop.c
+++ b/drivers/platform/x86/compal-laptop.c
@@ -82,7 +82,7 @@
#include <linux/hwmon-sysfs.h>
#include <linux/power_supply.h>
#include <linux/fb.h>
-
+#include <acpi/video.h>
/* ======= */
/* Defines */
@@ -959,7 +959,7 @@ static int __init compal_init(void)
return -ENODEV;
}
- if (!acpi_video_backlight_support()) {
+ if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
struct backlight_properties props;
memset(&props, 0, sizeof(struct backlight_properties));
props.type = BACKLIGHT_PLATFORM;
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index d688d806a8a5..35de903cb506 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -31,7 +31,9 @@
#include <linux/slab.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
+#include <acpi/video.h>
#include "../../firmware/dcdbas.h"
+#include "dell-rbtn.h"
#define BRIGHTNESS_TOKEN 0x7d
#define KBD_LED_OFF_TOKEN 0x01E1
@@ -642,6 +644,20 @@ static bool dell_laptop_i8042_filter(unsigned char data, unsigned char str,
return false;
}
+static int (*dell_rbtn_notifier_register_func)(struct notifier_block *);
+static int (*dell_rbtn_notifier_unregister_func)(struct notifier_block *);
+
+static int dell_laptop_rbtn_notifier_call(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ schedule_delayed_work(&dell_rfkill_work, 0);
+ return NOTIFY_OK;
+}
+
+static struct notifier_block dell_laptop_rbtn_notifier = {
+ .notifier_call = dell_laptop_rbtn_notifier_call,
+};
+
static int __init dell_setup_rfkill(void)
{
int status, ret, whitelisted;
@@ -718,10 +734,62 @@ static int __init dell_setup_rfkill(void)
goto err_wwan;
}
- ret = i8042_install_filter(dell_laptop_i8042_filter);
- if (ret) {
- pr_warn("Unable to install key filter\n");
+ /*
+ * Dell Airplane Mode Switch driver (dell-rbtn) supports ACPI devices
+ * which can receive events from HW slider switch.
+ *
+ * Dell SMBIOS on whitelisted models supports controlling radio devices
+ * but does not support receiving HW button switch events. We can use
+ * i8042 filter hook function to receive keyboard data and handle
+ * keycode for HW button.
+ *
+ * So if it is possible we will use Dell Airplane Mode Switch ACPI
+ * driver for receiving HW events and Dell SMBIOS for setting rfkill
+ * states. If ACPI driver or device is not available we will fallback to
+ * i8042 filter hook function.
+ *
+ * To prevent duplicate rfkill devices which control and do same thing,
+ * dell-rbtn driver will automatically remove its own rfkill devices
+ * once function dell_rbtn_notifier_register() is called.
+ */
+
+ dell_rbtn_notifier_register_func =
+ symbol_request(dell_rbtn_notifier_register);
+ if (dell_rbtn_notifier_register_func) {
+ dell_rbtn_notifier_unregister_func =
+ symbol_request(dell_rbtn_notifier_unregister);
+ if (!dell_rbtn_notifier_unregister_func) {
+ symbol_put(dell_rbtn_notifier_register);
+ dell_rbtn_notifier_register_func = NULL;
+ }
+ }
+
+ if (dell_rbtn_notifier_register_func) {
+ ret = dell_rbtn_notifier_register_func(
+ &dell_laptop_rbtn_notifier);
+ symbol_put(dell_rbtn_notifier_register);
+ dell_rbtn_notifier_register_func = NULL;
+ if (ret != 0) {
+ symbol_put(dell_rbtn_notifier_unregister);
+ dell_rbtn_notifier_unregister_func = NULL;
+ }
+ } else {
+ pr_info("Symbols from dell-rbtn acpi driver are not available\n");
+ ret = -ENODEV;
+ }
+
+ if (ret == 0) {
+ pr_info("Using dell-rbtn acpi driver for receiving events\n");
+ } else if (ret != -ENODEV) {
+ pr_warn("Unable to register dell rbtn notifier\n");
goto err_filter;
+ } else {
+ ret = i8042_install_filter(dell_laptop_i8042_filter);
+ if (ret) {
+ pr_warn("Unable to install key filter\n");
+ goto err_filter;
+ }
+ pr_info("Using i8042 filter function for receiving events\n");
}
return 0;
@@ -744,6 +812,14 @@ err_wifi:
static void dell_cleanup_rfkill(void)
{
+ if (dell_rbtn_notifier_unregister_func) {
+ dell_rbtn_notifier_unregister_func(&dell_laptop_rbtn_notifier);
+ symbol_put(dell_rbtn_notifier_unregister);
+ dell_rbtn_notifier_unregister_func = NULL;
+ } else {
+ i8042_remove_filter(dell_laptop_i8042_filter);
+ }
+ cancel_delayed_work_sync(&dell_rfkill_work);
if (wifi_rfkill) {
rfkill_unregister(wifi_rfkill);
rfkill_destroy(wifi_rfkill);
@@ -1920,13 +1996,8 @@ static int __init dell_init(void)
debugfs_create_file("rfkill", 0444, dell_laptop_dir, NULL,
&dell_debugfs_fops);
-#ifdef CONFIG_ACPI
- /* In the event of an ACPI backlight being available, don't
- * register the platform controller.
- */
- if (acpi_video_backlight_support())
+ if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
return 0;
-#endif
get_buffer();
buffer->input[0] = find_token_location(BRIGHTNESS_TOKEN);
@@ -1961,8 +2032,6 @@ static int __init dell_init(void)
return 0;
fail_backlight:
- i8042_remove_filter(dell_laptop_i8042_filter);
- cancel_delayed_work_sync(&dell_rfkill_work);
dell_cleanup_rfkill();
fail_rfkill:
free_page((unsigned long)bufferpage);
@@ -1983,8 +2052,6 @@ static void __exit dell_exit(void)
if (quirks && quirks->touchpad_led)
touchpad_led_exit();
kbd_led_exit();
- i8042_remove_filter(dell_laptop_i8042_filter);
- cancel_delayed_work_sync(&dell_rfkill_work);
backlight_device_unregister(dell_backlight_device);
dell_cleanup_rfkill();
if (platform_device) {
@@ -1995,7 +2062,14 @@ static void __exit dell_exit(void)
free_page((unsigned long)buffer);
}
-module_init(dell_init);
+/* dell-rbtn.c driver export functions which will not work correctly (and could
+ * cause kernel crash) if they are called before dell-rbtn.c init code. This is
+ * not problem when dell-rbtn.c is compiled as external module. When both files
+ * (dell-rbtn.c and dell-laptop.c) are compiled statically into kernel, then we
+ * need to ensure that dell_init() will be called after initializing dell-rbtn.
+ * This can be achieved by late_initcall() instead module_init().
+ */
+late_initcall(dell_init);
module_exit(dell_exit);
MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
diff --git a/drivers/platform/x86/dell-rbtn.c b/drivers/platform/x86/dell-rbtn.c
new file mode 100644
index 000000000000..cd410e392550
--- /dev/null
+++ b/drivers/platform/x86/dell-rbtn.c
@@ -0,0 +1,423 @@
+/*
+ Dell Airplane Mode Switch driver
+ Copyright (C) 2014-2015 Pali Rohár <pali.rohar@gmail.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+*/
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/rfkill.h>
+#include <linux/input.h>
+
+enum rbtn_type {
+ RBTN_UNKNOWN,
+ RBTN_TOGGLE,
+ RBTN_SLIDER,
+};
+
+struct rbtn_data {
+ enum rbtn_type type;
+ struct rfkill *rfkill;
+ struct input_dev *input_dev;
+};
+
+
+/*
+ * acpi functions
+ */
+
+static enum rbtn_type rbtn_check(struct acpi_device *device)
+{
+ unsigned long long output;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(device->handle, "CRBT", NULL, &output);
+ if (ACPI_FAILURE(status))
+ return RBTN_UNKNOWN;
+
+ switch (output) {
+ case 0:
+ case 1:
+ return RBTN_TOGGLE;
+ case 2:
+ case 3:
+ return RBTN_SLIDER;
+ default:
+ return RBTN_UNKNOWN;
+ }
+}
+
+static int rbtn_get(struct acpi_device *device)
+{
+ unsigned long long output;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(device->handle, "GRBT", NULL, &output);
+ if (ACPI_FAILURE(status))
+ return -EINVAL;
+
+ return !output;
+}
+
+static int rbtn_acquire(struct acpi_device *device, bool enable)
+{
+ struct acpi_object_list input;
+ union acpi_object param;
+ acpi_status status;
+
+ param.type = ACPI_TYPE_INTEGER;
+ param.integer.value = enable;
+ input.count = 1;
+ input.pointer = &param;
+
+ status = acpi_evaluate_object(device->handle, "ARBT", &input, NULL);
+ if (ACPI_FAILURE(status))
+ return -EINVAL;
+
+ return 0;
+}
+
+
+/*
+ * rfkill device
+ */
+
+static void rbtn_rfkill_query(struct rfkill *rfkill, void *data)
+{
+ struct acpi_device *device = data;
+ int state;
+
+ state = rbtn_get(device);
+ if (state < 0)
+ return;
+
+ rfkill_set_states(rfkill, state, state);
+}
+
+static int rbtn_rfkill_set_block(void *data, bool blocked)
+{
+ /* NOTE: setting soft rfkill state is not supported */
+ return -EINVAL;
+}
+
+static struct rfkill_ops rbtn_ops = {
+ .query = rbtn_rfkill_query,
+ .set_block = rbtn_rfkill_set_block,
+};
+
+static int rbtn_rfkill_init(struct acpi_device *device)
+{
+ struct rbtn_data *rbtn_data = device->driver_data;
+ int ret;
+
+ if (rbtn_data->rfkill)
+ return 0;
+
+ /*
+ * NOTE: rbtn controls all radio devices, not only WLAN
+ * but rfkill interface does not support "ANY" type
+ * so "WLAN" type is used
+ */
+ rbtn_data->rfkill = rfkill_alloc("dell-rbtn", &device->dev,
+ RFKILL_TYPE_WLAN, &rbtn_ops, device);
+ if (!rbtn_data->rfkill)
+ return -ENOMEM;
+
+ ret = rfkill_register(rbtn_data->rfkill);
+ if (ret) {
+ rfkill_destroy(rbtn_data->rfkill);
+ rbtn_data->rfkill = NULL;
+ return ret;
+ }
+
+ return 0;
+}
+
+static void rbtn_rfkill_exit(struct acpi_device *device)
+{
+ struct rbtn_data *rbtn_data = device->driver_data;
+
+ if (!rbtn_data->rfkill)
+ return;
+
+ rfkill_unregister(rbtn_data->rfkill);
+ rfkill_destroy(rbtn_data->rfkill);
+ rbtn_data->rfkill = NULL;
+}
+
+static void rbtn_rfkill_event(struct acpi_device *device)
+{
+ struct rbtn_data *rbtn_data = device->driver_data;
+
+ if (rbtn_data->rfkill)
+ rbtn_rfkill_query(rbtn_data->rfkill, device);
+}
+
+
+/*
+ * input device
+ */
+
+static int rbtn_input_init(struct rbtn_data *rbtn_data)
+{
+ int ret;
+
+ rbtn_data->input_dev = input_allocate_device();
+ if (!rbtn_data->input_dev)
+ return -ENOMEM;
+
+ rbtn_data->input_dev->name = "DELL Wireless hotkeys";
+ rbtn_data->input_dev->phys = "dellabce/input0";
+ rbtn_data->input_dev->id.bustype = BUS_HOST;
+ rbtn_data->input_dev->evbit[0] = BIT(EV_KEY);
+ set_bit(KEY_RFKILL, rbtn_data->input_dev->keybit);
+
+ ret = input_register_device(rbtn_data->input_dev);
+ if (ret) {
+ input_free_device(rbtn_data->input_dev);
+ rbtn_data->input_dev = NULL;
+ return ret;
+ }
+
+ return 0;
+}
+
+static void rbtn_input_exit(struct rbtn_data *rbtn_data)
+{
+ input_unregister_device(rbtn_data->input_dev);
+ rbtn_data->input_dev = NULL;
+}
+
+static void rbtn_input_event(struct rbtn_data *rbtn_data)
+{
+ input_report_key(rbtn_data->input_dev, KEY_RFKILL, 1);
+ input_sync(rbtn_data->input_dev);
+ input_report_key(rbtn_data->input_dev, KEY_RFKILL, 0);
+ input_sync(rbtn_data->input_dev);
+}
+
+
+/*
+ * acpi driver
+ */
+
+static int rbtn_add(struct acpi_device *device);
+static int rbtn_remove(struct acpi_device *device);
+static void rbtn_notify(struct acpi_device *device, u32 event);
+
+static const struct acpi_device_id rbtn_ids[] = {
+ { "DELRBTN", 0 },
+ { "DELLABCE", 0 },
+ { "", 0 },
+};
+
+static struct acpi_driver rbtn_driver = {
+ .name = "dell-rbtn",
+ .ids = rbtn_ids,
+ .ops = {
+ .add = rbtn_add,
+ .remove = rbtn_remove,
+ .notify = rbtn_notify,
+ },
+ .owner = THIS_MODULE,
+};
+
+
+/*
+ * notifier export functions
+ */
+
+static bool auto_remove_rfkill = true;
+
+static ATOMIC_NOTIFIER_HEAD(rbtn_chain_head);
+
+static int rbtn_inc_count(struct device *dev, void *data)
+{
+ struct acpi_device *device = to_acpi_device(dev);
+ struct rbtn_data *rbtn_data = device->driver_data;
+ int *count = data;
+
+ if (rbtn_data->type == RBTN_SLIDER)
+ (*count)++;
+
+ return 0;
+}
+
+static int rbtn_switch_dev(struct device *dev, void *data)
+{
+ struct acpi_device *device = to_acpi_device(dev);
+ struct rbtn_data *rbtn_data = device->driver_data;
+ bool enable = data;
+
+ if (rbtn_data->type != RBTN_SLIDER)
+ return 0;
+
+ if (enable)
+ rbtn_rfkill_init(device);
+ else
+ rbtn_rfkill_exit(device);
+
+ return 0;
+}
+
+int dell_rbtn_notifier_register(struct notifier_block *nb)
+{
+ bool first;
+ int count;
+ int ret;
+
+ count = 0;
+ ret = driver_for_each_device(&rbtn_driver.drv, NULL, &count,
+ rbtn_inc_count);
+ if (ret || count == 0)
+ return -ENODEV;
+
+ first = !rbtn_chain_head.head;
+
+ ret = atomic_notifier_chain_register(&rbtn_chain_head, nb);
+ if (ret != 0)
+ return ret;
+
+ if (auto_remove_rfkill && first)
+ ret = driver_for_each_device(&rbtn_driver.drv, NULL,
+ (void *)false, rbtn_switch_dev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dell_rbtn_notifier_register);
+
+int dell_rbtn_notifier_unregister(struct notifier_block *nb)
+{
+ int ret;
+
+ ret = atomic_notifier_chain_unregister(&rbtn_chain_head, nb);
+ if (ret != 0)
+ return ret;
+
+ if (auto_remove_rfkill && !rbtn_chain_head.head)
+ ret = driver_for_each_device(&rbtn_driver.drv, NULL,
+ (void *)true, rbtn_switch_dev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dell_rbtn_notifier_unregister);
+
+
+/*
+ * acpi driver functions
+ */
+
+static int rbtn_add(struct acpi_device *device)
+{
+ struct rbtn_data *rbtn_data;
+ enum rbtn_type type;
+ int ret = 0;
+
+ type = rbtn_check(device);
+ if (type == RBTN_UNKNOWN) {
+ dev_info(&device->dev, "Unknown device type\n");
+ return -EINVAL;
+ }
+
+ ret = rbtn_acquire(device, true);
+ if (ret < 0) {
+ dev_err(&device->dev, "Cannot enable device\n");
+ return ret;
+ }
+
+ rbtn_data = devm_kzalloc(&device->dev, sizeof(*rbtn_data), GFP_KERNEL);
+ if (!rbtn_data)
+ return -ENOMEM;
+
+ rbtn_data->type = type;
+ device->driver_data = rbtn_data;
+
+ switch (rbtn_data->type) {
+ case RBTN_TOGGLE:
+ ret = rbtn_input_init(rbtn_data);
+ break;
+ case RBTN_SLIDER:
+ if (auto_remove_rfkill && rbtn_chain_head.head)
+ ret = 0;
+ else
+ ret = rbtn_rfkill_init(device);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+
+}
+
+static int rbtn_remove(struct acpi_device *device)
+{
+ struct rbtn_data *rbtn_data = device->driver_data;
+
+ switch (rbtn_data->type) {
+ case RBTN_TOGGLE:
+ rbtn_input_exit(rbtn_data);
+ break;
+ case RBTN_SLIDER:
+ rbtn_rfkill_exit(device);
+ break;
+ default:
+ break;
+ }
+
+ rbtn_acquire(device, false);
+ device->driver_data = NULL;
+
+ return 0;
+}
+
+static void rbtn_notify(struct acpi_device *device, u32 event)
+{
+ struct rbtn_data *rbtn_data = device->driver_data;
+
+ if (event != 0x80) {
+ dev_info(&device->dev, "Received unknown event (0x%x)\n",
+ event);
+ return;
+ }
+
+ switch (rbtn_data->type) {
+ case RBTN_TOGGLE:
+ rbtn_input_event(rbtn_data);
+ break;
+ case RBTN_SLIDER:
+ rbtn_rfkill_event(device);
+ atomic_notifier_call_chain(&rbtn_chain_head, event, device);
+ break;
+ default:
+ break;
+ }
+}
+
+
+/*
+ * module functions
+ */
+
+module_acpi_driver(rbtn_driver);
+
+module_param(auto_remove_rfkill, bool, 0444);
+
+MODULE_PARM_DESC(auto_remove_rfkill, "Automatically remove rfkill devices when "
+ "other modules start receiving events "
+ "from this module and re-add them when "
+ "the last module stops receiving events "
+ "(default true)");
+MODULE_DEVICE_TABLE(acpi, rbtn_ids);
+MODULE_DESCRIPTION("Dell Airplane Mode Switch driver");
+MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/x86/dell-rbtn.h b/drivers/platform/x86/dell-rbtn.h
new file mode 100644
index 000000000000..c59cc6b8ec2b
--- /dev/null
+++ b/drivers/platform/x86/dell-rbtn.h
@@ -0,0 +1,24 @@
+/*
+ Dell Airplane Mode Switch driver
+ Copyright (C) 2014-2015 Pali Rohár <pali.rohar@gmail.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+*/
+
+#ifndef _DELL_RBTN_H_
+#define _DELL_RBTN_H_
+
+struct notifier_block;
+
+int dell_rbtn_notifier_register(struct notifier_block *nb);
+int dell_rbtn_notifier_unregister(struct notifier_block *nb);
+
+#endif
diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c
index 6512a06bc053..f2d77fe696ac 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell-wmi.c
@@ -35,6 +35,7 @@
#include <linux/acpi.h>
#include <linux/string.h>
#include <linux/dmi.h>
+#include <acpi/video.h>
MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
MODULE_DESCRIPTION("Dell laptop WMI hotkeys driver");
@@ -397,7 +398,7 @@ static int __init dell_wmi_init(void)
}
dmi_walk(find_hk_type, NULL);
- acpi_video = acpi_video_backlight_support();
+ acpi_video = acpi_video_get_backlight_type() != acpi_backlight_vendor;
err = dell_wmi_input_setup();
if (err)
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 844c2096bde9..8cdf315f9730 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -37,6 +37,7 @@
#include <linux/pci_hotplug.h>
#include <linux/leds.h>
#include <linux/dmi.h>
+#include <acpi/video.h>
#define EEEPC_LAPTOP_VERSION "0.1"
#define EEEPC_LAPTOP_NAME "Eee PC Hotkey Driver"
@@ -1433,12 +1434,10 @@ static int eeepc_acpi_add(struct acpi_device *device)
if (result)
goto fail_platform;
- if (!acpi_video_backlight_support()) {
+ if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
result = eeepc_backlight_init(eeepc);
if (result)
goto fail_backlight;
- } else {
- pr_info("Backlight controlled by ACPI video driver\n");
}
result = eeepc_input_init(eeepc);
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index 2a9afa261c61..1c62caff93fd 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -72,6 +72,7 @@
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
#include <linux/leds.h>
#endif
+#include <acpi/video.h>
#define FUJITSU_DRIVER_VERSION "0.6.0"
@@ -1099,7 +1100,7 @@ static int __init fujitsu_init(void)
/* Register backlight stuff */
- if (!acpi_video_backlight_support()) {
+ if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
struct backlight_properties props;
memset(&props, 0, sizeof(struct backlight_properties));
@@ -1137,8 +1138,7 @@ static int __init fujitsu_init(void)
}
/* Sync backlight power status (needs FUJ02E3 device, hence deferred) */
-
- if (!acpi_video_backlight_support()) {
+ if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
if (call_fext_func(FUNC_BACKLIGHT, 0x2, 0x4, 0x0) == 3)
fujitsu->bl_device->props.power = FB_BLANK_POWERDOWN;
else
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index b496db87bc05..76b57388d01b 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -38,6 +38,7 @@
#include <linux/i8042.h>
#include <linux/dmi.h>
#include <linux/device.h>
+#include <acpi/video.h>
#define IDEAPAD_RFKILL_DEV_NUM (3)
@@ -464,8 +465,9 @@ static const struct ideapad_rfk_data ideapad_rfk_data[] = {
static int ideapad_rfk_set(void *data, bool blocked)
{
struct ideapad_rfk_priv *priv = data;
+ int opcode = ideapad_rfk_data[priv->dev].opcode;
- return write_ec_cmd(priv->priv->adev->handle, priv->dev, !blocked);
+ return write_ec_cmd(priv->priv->adev->handle, opcode, !blocked);
}
static struct rfkill_ops ideapad_rfk_ops = {
@@ -837,6 +839,13 @@ static const struct dmi_system_id no_hw_rfkill_list[] = {
},
},
{
+ .ident = "Lenovo G50-30",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo G50-30"),
+ },
+ },
+ {
.ident = "Lenovo Yoga 2 11 / 13 / Pro",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
@@ -903,7 +912,7 @@ static int ideapad_acpi_add(struct platform_device *pdev)
ideapad_sync_rfk_state(priv);
ideapad_sync_touchpad_state(priv);
- if (!acpi_video_backlight_support()) {
+ if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
ret = ideapad_backlight_init(priv);
if (ret && ret != -ENODEV)
goto backlight_failed;
diff --git a/drivers/platform/x86/intel_oaktrail.c b/drivers/platform/x86/intel_oaktrail.c
index 8037c8b46241..6aa33c4a809f 100644
--- a/drivers/platform/x86/intel_oaktrail.c
+++ b/drivers/platform/x86/intel_oaktrail.c
@@ -50,6 +50,7 @@
#include <linux/platform_device.h>
#include <linux/dmi.h>
#include <linux/rfkill.h>
+#include <acpi/video.h>
#define DRIVER_NAME "intel_oaktrail"
#define DRIVER_VERSION "0.4ac1"
@@ -343,13 +344,11 @@ static int __init oaktrail_init(void)
goto err_device_add;
}
- if (!acpi_video_backlight_support()) {
+ if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
ret = oaktrail_backlight_init();
if (ret)
goto err_backlight;
-
- } else
- pr_info("Backlight controlled by ACPI video driver\n");
+ }
ret = oaktrail_rfkill_init();
if (ret) {
diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c
index 085987730aab..42317704629d 100644
--- a/drivers/platform/x86/msi-laptop.c
+++ b/drivers/platform/x86/msi-laptop.c
@@ -64,6 +64,7 @@
#include <linux/i8042.h>
#include <linux/input.h>
#include <linux/input/sparse-keymap.h>
+#include <acpi/video.h>
#define MSI_DRIVER_VERSION "0.5"
@@ -1069,9 +1070,8 @@ static int __init msi_init(void)
/* Register backlight stuff */
- if (!quirks->old_ec_model || acpi_video_backlight_support()) {
- pr_info("Brightness ignored, must be controlled by ACPI video driver\n");
- } else {
+ if (quirks->old_ec_model ||
+ acpi_video_get_backlight_type() == acpi_backlight_vendor) {
struct backlight_properties props;
memset(&props, 0, sizeof(struct backlight_properties));
props.type = BACKLIGHT_PLATFORM;
diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c
index 6d2bac0c463c..978e6d640572 100644
--- a/drivers/platform/x86/msi-wmi.c
+++ b/drivers/platform/x86/msi-wmi.c
@@ -29,6 +29,7 @@
#include <linux/backlight.h>
#include <linux/slab.h>
#include <linux/module.h>
+#include <acpi/video.h>
MODULE_AUTHOR("Thomas Renninger <trenn@suse.de>");
MODULE_DESCRIPTION("MSI laptop WMI hotkeys driver");
@@ -320,7 +321,8 @@ static int __init msi_wmi_init(void)
break;
}
- if (wmi_has_guid(MSIWMI_BIOS_GUID) && !acpi_video_backlight_support()) {
+ if (wmi_has_guid(MSIWMI_BIOS_GUID) &&
+ acpi_video_get_backlight_type() == acpi_backlight_vendor) {
err = msi_wmi_backlight_setup();
if (err) {
pr_err("Unable to setup backlight device\n");
diff --git a/drivers/platform/x86/pvpanic.c b/drivers/platform/x86/pvpanic.c
index 073a90a63dbc..fd86daba7ffd 100644
--- a/drivers/platform/x86/pvpanic.c
+++ b/drivers/platform/x86/pvpanic.c
@@ -92,13 +92,13 @@ pvpanic_walk_resources(struct acpi_resource *res, void *context)
static int pvpanic_add(struct acpi_device *device)
{
- acpi_status status;
- u64 ret;
+ int ret;
- status = acpi_evaluate_integer(device->handle, "_STA", NULL,
- &ret);
+ ret = acpi_bus_get_status(device);
+ if (ret < 0)
+ return ret;
- if (ACPI_FAILURE(status) || (ret & 0x0B) != 0x0B)
+ if (!device->status.enabled || !device->status.functional)
return -ENODEV;
acpi_walk_resources(device->handle, METHOD_NAME__CRS,
diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c
index 9e701b2256f9..8c146e2b6727 100644
--- a/drivers/platform/x86/samsung-laptop.c
+++ b/drivers/platform/x86/samsung-laptop.c
@@ -1720,27 +1720,14 @@ static int __init samsung_init(void)
samsung->handle_backlight = true;
samsung->quirks = quirks;
-
#ifdef CONFIG_ACPI
if (samsung->quirks->broken_acpi_video)
- acpi_video_dmi_promote_vendor();
-
- /* Don't handle backlight here if the acpi video already handle it */
- if (acpi_video_backlight_support()) {
- samsung->handle_backlight = false;
- } else if (samsung->quirks->broken_acpi_video) {
- pr_info("Disabling ACPI video driver\n");
- acpi_video_unregister();
- }
+ acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
+ if (samsung->quirks->use_native_backlight)
+ acpi_video_set_dmi_backlight_type(acpi_backlight_native);
- if (samsung->quirks->use_native_backlight) {
- pr_info("Using native backlight driver\n");
- /* Tell acpi-video to not handle the backlight */
- acpi_video_dmi_promote_vendor();
- acpi_video_unregister();
- /* And also do not handle it ourselves */
+ if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
samsung->handle_backlight = false;
- }
#endif
ret = samsung_platform_init(samsung);
@@ -1751,12 +1738,6 @@ static int __init samsung_init(void)
if (ret)
goto error_sabi;
-#ifdef CONFIG_ACPI
- /* Only log that if we are really on a sabi platform */
- if (acpi_video_backlight_support())
- pr_info("Backlight controlled by ACPI video driver\n");
-#endif
-
ret = samsung_sysfs_init(samsung);
if (ret)
goto error_sysfs;
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index e51c1e753607..aeb80d1c2b07 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -69,6 +69,7 @@
#include <linux/miscdevice.h>
#endif
#include <asm/uaccess.h>
+#include <acpi/video.h>
#define dprintk(fmt, ...) \
do { \
@@ -3198,12 +3199,8 @@ static int sony_nc_add(struct acpi_device *device)
sony_nc_function_setup(device, sony_pf_device);
}
- /* setup input devices and helper fifo */
- if (acpi_video_backlight_support()) {
- pr_info("brightness ignored, must be controlled by ACPI video driver\n");
- } else {
+ if (acpi_video_get_backlight_type() == acpi_backlight_vendor)
sony_nc_backlight_setup();
- }
/* create sony_pf sysfs attributes related to the SNC device */
for (item = sony_nc_values; item->name; ++item) {
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 28f328136f0d..33e488cf5569 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -83,6 +83,7 @@
#include <sound/control.h>
#include <sound/initval.h>
#include <asm/uaccess.h>
+#include <acpi/video.h>
/* ThinkPad CMOS commands */
#define TP_CMOS_VOLUME_DOWN 0
@@ -3487,7 +3488,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
/* Do not issue duplicate brightness change events to
* userspace. tpacpi_detect_brightness_capabilities() must have
* been called before this point */
- if (acpi_video_backlight_support()) {
+ if (acpi_video_get_backlight_type() != acpi_backlight_vendor) {
pr_info("This ThinkPad has standard ACPI backlight "
"brightness control, supported by the ACPI "
"video driver\n");
@@ -6491,7 +6492,7 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
return 1;
}
- if (acpi_video_backlight_support()) {
+ if (acpi_video_get_backlight_type() != acpi_backlight_vendor) {
if (brightness_enable > 1) {
pr_info("Standard ACPI backlight interface "
"available, not loading native one\n");
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 9956b9902bb4..3ad7b1fa24ce 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -31,7 +31,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-#define TOSHIBA_ACPI_VERSION "0.21"
+#define TOSHIBA_ACPI_VERSION "0.22"
#define PROC_INTERFACE_VERSION 1
#include <linux/kernel.h>
@@ -41,7 +41,6 @@
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/backlight.h>
-#include <linux/rfkill.h>
#include <linux/input.h>
#include <linux/input/sparse-keymap.h>
#include <linux/leds.h>
@@ -82,7 +81,7 @@ MODULE_LICENSE("GPL");
#define TCI_WORDS 6
-/* operations */
+/* Operations */
#define HCI_SET 0xff00
#define HCI_GET 0xfe00
#define SCI_OPEN 0xf100
@@ -90,7 +89,7 @@ MODULE_LICENSE("GPL");
#define SCI_GET 0xf300
#define SCI_SET 0xf400
-/* return codes */
+/* Return codes */
#define TOS_SUCCESS 0x0000
#define TOS_OPEN_CLOSE_OK 0x0044
#define TOS_FAILURE 0x1000
@@ -105,7 +104,7 @@ MODULE_LICENSE("GPL");
#define TOS_NOT_INITIALIZED 0x8d50
#define TOS_NOT_INSTALLED 0x8e00
-/* registers */
+/* Registers */
#define HCI_FAN 0x0004
#define HCI_TR_BACKLIGHT 0x0005
#define HCI_SYSTEM_EVENT 0x0016
@@ -127,7 +126,7 @@ MODULE_LICENSE("GPL");
#define SCI_TOUCHPAD 0x050e
#define SCI_KBD_FUNCTION_KEYS 0x0522
-/* field definitions */
+/* Field definitions */
#define HCI_ACCEL_MASK 0x7fff
#define HCI_HOTKEY_DISABLE 0x0b
#define HCI_HOTKEY_ENABLE 0x09
@@ -165,7 +164,6 @@ MODULE_LICENSE("GPL");
struct toshiba_acpi_dev {
struct acpi_device *acpi_dev;
const char *method_hci;
- struct rfkill *bt_rfk;
struct input_dev *hotkey_dev;
struct work_struct hotkey_work;
struct backlight_device *backlight_dev;
@@ -202,8 +200,6 @@ struct toshiba_acpi_dev {
unsigned int panel_power_on_supported:1;
unsigned int usb_three_supported:1;
unsigned int sysfs_created:1;
-
- struct mutex mutex;
};
static struct toshiba_acpi_dev *toshiba_acpi;
@@ -330,13 +326,13 @@ static acpi_status tci_raw(struct toshiba_acpi_dev *dev,
}
/*
- * Common hci tasks (get or set one or two value)
+ * Common hci tasks
*
* In addition to the ACPI status, the HCI system returns a result which
* may be useful (such as "not supported").
*/
-static u32 hci_write1(struct toshiba_acpi_dev *dev, u32 reg, u32 in1)
+static u32 hci_write(struct toshiba_acpi_dev *dev, u32 reg, u32 in1)
{
u32 in[TCI_WORDS] = { HCI_SET, reg, in1, 0, 0, 0 };
u32 out[TCI_WORDS];
@@ -345,7 +341,7 @@ static u32 hci_write1(struct toshiba_acpi_dev *dev, u32 reg, u32 in1)
return ACPI_SUCCESS(status) ? out[0] : TOS_FAILURE;
}
-static u32 hci_read1(struct toshiba_acpi_dev *dev, u32 reg, u32 *out1)
+static u32 hci_read(struct toshiba_acpi_dev *dev, u32 reg, u32 *out1)
{
u32 in[TCI_WORDS] = { HCI_GET, reg, 0, 0, 0, 0 };
u32 out[TCI_WORDS];
@@ -359,31 +355,6 @@ static u32 hci_read1(struct toshiba_acpi_dev *dev, u32 reg, u32 *out1)
return out[0];
}
-static u32 hci_write2(struct toshiba_acpi_dev *dev, u32 reg, u32 in1, u32 in2)
-{
- u32 in[TCI_WORDS] = { HCI_SET, reg, in1, in2, 0, 0 };
- u32 out[TCI_WORDS];
- acpi_status status = tci_raw(dev, in, out);
-
- return ACPI_SUCCESS(status) ? out[0] : TOS_FAILURE;
-}
-
-static u32 hci_read2(struct toshiba_acpi_dev *dev,
- u32 reg, u32 *out1, u32 *out2)
-{
- u32 in[TCI_WORDS] = { HCI_GET, reg, *out1, *out2, 0, 0 };
- u32 out[TCI_WORDS];
- acpi_status status = tci_raw(dev, in, out);
-
- if (ACPI_FAILURE(status))
- return TOS_FAILURE;
-
- *out1 = out[2];
- *out2 = out[3];
-
- return out[0];
-}
-
/*
* Common sci tasks
*/
@@ -395,7 +366,7 @@ static int sci_open(struct toshiba_acpi_dev *dev)
acpi_status status;
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to open SCI failed\n");
return 0;
}
@@ -433,7 +404,7 @@ static void sci_close(struct toshiba_acpi_dev *dev)
acpi_status status;
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to close SCI failed\n");
return;
}
@@ -481,7 +452,7 @@ static int toshiba_illumination_available(struct toshiba_acpi_dev *dev)
status = tci_raw(dev, in, out);
sci_close(dev);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to query Illumination support failed\n");
return 0;
} else if (out[0] == TOS_NOT_SUPPORTED) {
@@ -522,7 +493,7 @@ static enum led_brightness toshiba_illumination_get(struct led_classdev *cdev)
struct toshiba_acpi_dev, led_dev);
u32 state, result;
- /* First request : initialize communication. */
+ /* First request : initialize communication. */
if (!sci_open(dev))
return LED_OFF;
@@ -625,7 +596,7 @@ static enum led_brightness toshiba_kbd_backlight_get(struct led_classdev *cdev)
u32 state, result;
/* Check the keyboard backlight state */
- result = hci_read1(dev, HCI_KBD_ILLUMINATION, &state);
+ result = hci_read(dev, HCI_KBD_ILLUMINATION, &state);
if (result == TOS_FAILURE || result == TOS_INPUT_DATA_ERROR) {
pr_err("ACPI call to get the keyboard backlight failed\n");
return LED_OFF;
@@ -646,7 +617,7 @@ static void toshiba_kbd_backlight_set(struct led_classdev *cdev,
/* Set the keyboard backlight state */
state = brightness ? 1 : 0;
- result = hci_write1(dev, HCI_KBD_ILLUMINATION, state);
+ result = hci_write(dev, HCI_KBD_ILLUMINATION, state);
if (result == TOS_FAILURE || result == TOS_INPUT_DATA_ERROR) {
pr_err("ACPI call to set KBD Illumination mode failed\n");
return;
@@ -703,7 +674,7 @@ static int toshiba_eco_mode_available(struct toshiba_acpi_dev *dev)
u32 out[TCI_WORDS];
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to get ECO led failed\n");
} else if (out[0] == TOS_NOT_INSTALLED) {
pr_info("ECO led not installed");
@@ -825,7 +796,7 @@ static void toshiba_usb_sleep_charge_available(struct toshiba_acpi_dev *dev)
return;
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to get USB Sleep and Charge mode failed\n");
sci_close(dev);
return;
@@ -839,7 +810,7 @@ static void toshiba_usb_sleep_charge_available(struct toshiba_acpi_dev *dev)
in[5] = SCI_USB_CHARGE_BAT_LVL;
status = tci_raw(dev, in, out);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to get USB Sleep and Charge mode failed\n");
sci_close(dev);
return;
@@ -919,7 +890,7 @@ static int toshiba_sleep_functions_status_get(struct toshiba_acpi_dev *dev,
in[5] = SCI_USB_CHARGE_BAT_LVL;
status = tci_raw(dev, in, out);
sci_close(dev);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to get USB S&C battery level failed\n");
return -EIO;
} else if (out[0] == TOS_NOT_SUPPORTED) {
@@ -948,7 +919,7 @@ static int toshiba_sleep_functions_status_set(struct toshiba_acpi_dev *dev,
in[5] = SCI_USB_CHARGE_BAT_LVL;
status = tci_raw(dev, in, out);
sci_close(dev);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to set USB S&C battery level failed\n");
return -EIO;
} else if (out[0] == TOS_NOT_SUPPORTED) {
@@ -974,7 +945,7 @@ static int toshiba_usb_rapid_charge_get(struct toshiba_acpi_dev *dev,
in[5] = SCI_USB_CHARGE_RAPID_DSP;
status = tci_raw(dev, in, out);
sci_close(dev);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to get USB Rapid Charge failed\n");
return -EIO;
} else if (out[0] == TOS_NOT_SUPPORTED ||
@@ -1002,7 +973,7 @@ static int toshiba_usb_rapid_charge_set(struct toshiba_acpi_dev *dev,
in[5] = SCI_USB_CHARGE_RAPID_DSP;
status = tci_raw(dev, in, out);
sci_close(dev);
- if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to set USB Rapid Charge failed\n");
return -EIO;
} else if (out[0] == TOS_NOT_SUPPORTED) {
@@ -1194,121 +1165,31 @@ static int toshiba_usb_three_set(struct toshiba_acpi_dev *dev, u32 state)
static int toshiba_hotkey_event_type_get(struct toshiba_acpi_dev *dev,
u32 *type)
{
- u32 val1 = 0x03;
- u32 val2 = 0;
- u32 result;
+ u32 in[TCI_WORDS] = { HCI_GET, HCI_SYSTEM_INFO, 0x03, 0, 0, 0 };
+ u32 out[TCI_WORDS];
+ acpi_status status;
- result = hci_read2(dev, HCI_SYSTEM_INFO, &val1, &val2);
- if (result == TOS_FAILURE) {
+ status = tci_raw(dev, in, out);
+ if (ACPI_FAILURE(status)) {
pr_err("ACPI call to get System type failed\n");
return -EIO;
- } else if (result == TOS_NOT_SUPPORTED) {
+ } else if (out[0] == TOS_NOT_SUPPORTED) {
pr_info("System type not supported\n");
return -ENODEV;
}
- *type = val2;
+ *type = out[3];
return 0;
}
-/* Bluetooth rfkill handlers */
-
-static u32 hci_get_bt_present(struct toshiba_acpi_dev *dev, bool *present)
-{
- u32 hci_result;
- u32 value, value2;
-
- value = 0;
- value2 = 0;
- hci_result = hci_read2(dev, HCI_WIRELESS, &value, &value2);
- if (hci_result == TOS_SUCCESS)
- *present = (value & HCI_WIRELESS_BT_PRESENT) ? true : false;
-
- return hci_result;
-}
-
-static u32 hci_get_radio_state(struct toshiba_acpi_dev *dev, bool *radio_state)
-{
- u32 hci_result;
- u32 value, value2;
-
- value = 0;
- value2 = 0x0001;
- hci_result = hci_read2(dev, HCI_WIRELESS, &value, &value2);
-
- *radio_state = value & HCI_WIRELESS_KILL_SWITCH;
- return hci_result;
-}
-
-static int bt_rfkill_set_block(void *data, bool blocked)
-{
- struct toshiba_acpi_dev *dev = data;
- u32 result1, result2;
- u32 value;
- int err;
- bool radio_state;
-
- value = (blocked == false);
-
- mutex_lock(&dev->mutex);
- if (hci_get_radio_state(dev, &radio_state) != TOS_SUCCESS) {
- err = -EIO;
- goto out;
- }
-
- if (!radio_state) {
- err = 0;
- goto out;
- }
-
- result1 = hci_write2(dev, HCI_WIRELESS, value, HCI_WIRELESS_BT_POWER);
- result2 = hci_write2(dev, HCI_WIRELESS, value, HCI_WIRELESS_BT_ATTACH);
-
- if (result1 != TOS_SUCCESS || result2 != TOS_SUCCESS)
- err = -EIO;
- else
- err = 0;
- out:
- mutex_unlock(&dev->mutex);
- return err;
-}
-
-static void bt_rfkill_poll(struct rfkill *rfkill, void *data)
-{
- bool new_rfk_state;
- bool value;
- u32 hci_result;
- struct toshiba_acpi_dev *dev = data;
-
- mutex_lock(&dev->mutex);
-
- hci_result = hci_get_radio_state(dev, &value);
- if (hci_result != TOS_SUCCESS) {
- /* Can't do anything useful */
- mutex_unlock(&dev->mutex);
- return;
- }
-
- new_rfk_state = value;
-
- mutex_unlock(&dev->mutex);
-
- if (rfkill_set_hw_state(rfkill, !new_rfk_state))
- bt_rfkill_set_block(data, true);
-}
-
-static const struct rfkill_ops toshiba_rfk_ops = {
- .set_block = bt_rfkill_set_block,
- .poll = bt_rfkill_poll,
-};
-
+/* Transflective Backlight */
static int get_tr_backlight_status(struct toshiba_acpi_dev *dev, bool *enabled)
{
u32 hci_result;
u32 status;
- hci_result = hci_read1(dev, HCI_TR_BACKLIGHT, &status);
+ hci_result = hci_read(dev, HCI_TR_BACKLIGHT, &status);
*enabled = !status;
return hci_result == TOS_SUCCESS ? 0 : -EIO;
}
@@ -1318,12 +1199,13 @@ static int set_tr_backlight_status(struct toshiba_acpi_dev *dev, bool enable)
u32 hci_result;
u32 value = !enable;
- hci_result = hci_write1(dev, HCI_TR_BACKLIGHT, value);
+ hci_result = hci_write(dev, HCI_TR_BACKLIGHT, value);
return hci_result == TOS_SUCCESS ? 0 : -EIO;
}
-static struct proc_dir_entry *toshiba_proc_dir /*= 0*/;
+static struct proc_dir_entry *toshiba_proc_dir;
+/* LCD Brightness */
static int __get_lcd_brightness(struct toshiba_acpi_dev *dev)
{
u32 hci_result;
@@ -1341,7 +1223,7 @@ static int __get_lcd_brightness(struct toshiba_acpi_dev *dev)
brightness++;
}
- hci_result = hci_read1(dev, HCI_LCD_BRIGHTNESS, &value);
+ hci_result = hci_read(dev, HCI_LCD_BRIGHTNESS, &value);
if (hci_result == TOS_SUCCESS)
return brightness + (value >> HCI_LCD_BRIGHTNESS_SHIFT);
@@ -1396,7 +1278,7 @@ static int set_lcd_brightness(struct toshiba_acpi_dev *dev, int value)
}
value = value << HCI_LCD_BRIGHTNESS_SHIFT;
- hci_result = hci_write1(dev, HCI_LCD_BRIGHTNESS, value);
+ hci_result = hci_write(dev, HCI_LCD_BRIGHTNESS, value);
return hci_result == TOS_SUCCESS ? 0 : -EIO;
}
@@ -1446,7 +1328,7 @@ static int get_video_status(struct toshiba_acpi_dev *dev, u32 *status)
{
u32 hci_result;
- hci_result = hci_read1(dev, HCI_VIDEO_OUT, status);
+ hci_result = hci_read(dev, HCI_VIDEO_OUT, status);
return hci_result == TOS_SUCCESS ? 0 : -EIO;
}
@@ -1531,7 +1413,8 @@ static ssize_t video_proc_write(struct file *file, const char __user *buf,
_set_bit(&new_video_out, HCI_VIDEO_OUT_TV, tv_out);
/*
* To avoid unnecessary video disruption, only write the new
- * video setting if something changed. */
+ * video setting if something changed.
+ */
if (new_video_out != video_out)
ret = write_acpi_int(METHOD_VIDEO_OUT, new_video_out);
}
@@ -1552,7 +1435,7 @@ static int get_fan_status(struct toshiba_acpi_dev *dev, u32 *status)
{
u32 hci_result;
- hci_result = hci_read1(dev, HCI_FAN, status);
+ hci_result = hci_read(dev, HCI_FAN, status);
return hci_result == TOS_SUCCESS ? 0 : -EIO;
}
@@ -1592,7 +1475,7 @@ static ssize_t fan_proc_write(struct file *file, const char __user *buf,
if (sscanf(cmd, " force_on : %i", &value) == 1 &&
value >= 0 && value <= 1) {
- hci_result = hci_write1(dev, HCI_FAN, value);
+ hci_result = hci_write(dev, HCI_FAN, value);
if (hci_result == TOS_SUCCESS)
dev->force_fan = value;
else
@@ -1620,7 +1503,7 @@ static int keys_proc_show(struct seq_file *m, void *v)
u32 value;
if (!dev->key_event_valid && dev->system_event_supported) {
- hci_result = hci_read1(dev, HCI_SYSTEM_EVENT, &value);
+ hci_result = hci_read(dev, HCI_SYSTEM_EVENT, &value);
if (hci_result == TOS_SUCCESS) {
dev->key_event_valid = 1;
dev->last_key_event = value;
@@ -1632,7 +1515,7 @@ static int keys_proc_show(struct seq_file *m, void *v)
* some machines where system events sporadically
* become disabled.
*/
- hci_result = hci_write1(dev, HCI_SYSTEM_EVENT, 1);
+ hci_result = hci_write(dev, HCI_SYSTEM_EVENT, 1);
pr_notice("Re-enabled hotkeys\n");
} else {
pr_err("Error reading hotkey status\n");
@@ -1769,7 +1652,7 @@ static ssize_t fan_store(struct device *dev,
if (state != 0 && state != 1)
return -EINVAL;
- result = hci_write1(toshiba, HCI_FAN, state);
+ result = hci_write(toshiba, HCI_FAN, state);
if (result == TOS_FAILURE)
return -EIO;
else if (result == TOS_NOT_SUPPORTED)
@@ -2391,7 +2274,7 @@ static int toshiba_acpi_enable_hotkeys(struct toshiba_acpi_dev *dev)
if (ACPI_FAILURE(status))
return -ENODEV;
- result = hci_write1(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_ENABLE);
+ result = hci_write(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_ENABLE);
if (result == TOS_FAILURE)
return -EIO;
else if (result == TOS_NOT_SUPPORTED)
@@ -2408,8 +2291,8 @@ static void toshiba_acpi_enable_special_functions(struct toshiba_acpi_dev *dev)
* Re-activate the hotkeys, but this time, we are using the
* "Special Functions" mode.
*/
- result = hci_write1(dev, HCI_HOTKEY_EVENT,
- HCI_HOTKEY_SPECIAL_FUNCTIONS);
+ result = hci_write(dev, HCI_HOTKEY_EVENT,
+ HCI_HOTKEY_SPECIAL_FUNCTIONS);
if (result != TOS_SUCCESS)
pr_err("Could not enable the Special Function mode\n");
}
@@ -2490,7 +2373,7 @@ static void toshiba_acpi_process_hotkeys(struct toshiba_acpi_dev *dev)
toshiba_acpi_report_hotkey(dev, scancode);
} else if (dev->system_event_supported) {
do {
- hci_result = hci_read1(dev, HCI_SYSTEM_EVENT, &value);
+ hci_result = hci_read(dev, HCI_SYSTEM_EVENT, &value);
switch (hci_result) {
case TOS_SUCCESS:
toshiba_acpi_report_hotkey(dev, (int)value);
@@ -2502,7 +2385,7 @@ static void toshiba_acpi_process_hotkeys(struct toshiba_acpi_dev *dev)
* sporadically become disabled.
*/
hci_result =
- hci_write1(dev, HCI_SYSTEM_EVENT, 1);
+ hci_write(dev, HCI_SYSTEM_EVENT, 1);
pr_notice("Re-enabled hotkeys\n");
/* Fall through */
default:
@@ -2579,7 +2462,7 @@ static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev)
if (acpi_has_method(dev->acpi_dev->handle, "INFO"))
dev->info_supported = 1;
else {
- hci_result = hci_write1(dev, HCI_SYSTEM_EVENT, 1);
+ hci_result = hci_write(dev, HCI_SYSTEM_EVENT, 1);
if (hci_result == TOS_SUCCESS)
dev->system_event_supported = 1;
}
@@ -2640,14 +2523,11 @@ static int toshiba_acpi_setup_backlight(struct toshiba_acpi_dev *dev)
*/
if (dev->tr_backlight_supported ||
dmi_check_system(toshiba_vendor_backlight_dmi))
- acpi_video_dmi_promote_vendor();
+ acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
- if (acpi_video_backlight_support())
+ if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
return 0;
- /* acpi-video may have loaded before we called dmi_promote_vendor() */
- acpi_video_unregister_backlight();
-
memset(&props, 0, sizeof(props));
props.type = BACKLIGHT_PLATFORM;
props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1;
@@ -2692,11 +2572,6 @@ static int toshiba_acpi_remove(struct acpi_device *acpi_dev)
sparse_keymap_free(dev->hotkey_dev);
}
- if (dev->bt_rfk) {
- rfkill_unregister(dev->bt_rfk);
- rfkill_destroy(dev->bt_rfk);
- }
-
backlight_device_unregister(dev->backlight_dev);
if (dev->illumination_supported)
@@ -2733,7 +2608,6 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
const char *hci_method;
u32 special_functions;
u32 dummy;
- bool bt_present;
int ret = 0;
if (toshiba_acpi)
@@ -2769,33 +2643,10 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
if (toshiba_acpi_setup_keyboard(dev))
pr_info("Unable to activate hotkeys\n");
- mutex_init(&dev->mutex);
-
ret = toshiba_acpi_setup_backlight(dev);
if (ret)
goto error;
- /* Register rfkill switch for Bluetooth */
- if (hci_get_bt_present(dev, &bt_present) == TOS_SUCCESS && bt_present) {
- dev->bt_rfk = rfkill_alloc("Toshiba Bluetooth",
- &acpi_dev->dev,
- RFKILL_TYPE_BLUETOOTH,
- &toshiba_rfk_ops,
- dev);
- if (!dev->bt_rfk) {
- pr_err("unable to allocate rfkill device\n");
- ret = -ENOMEM;
- goto error;
- }
-
- ret = rfkill_register(dev->bt_rfk);
- if (ret) {
- pr_err("unable to register rfkill device\n");
- rfkill_destroy(dev->bt_rfk);
- goto error;
- }
- }
-
if (toshiba_illumination_available(dev)) {
dev->led_dev.name = "toshiba::illumination";
dev->led_dev.max_brightness = 1;
@@ -2933,7 +2784,7 @@ static int toshiba_acpi_suspend(struct device *device)
u32 result;
if (dev->hotkey_dev)
- result = hci_write1(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_DISABLE);
+ result = hci_write(dev, HCI_HOTKEY_EVENT, HCI_HOTKEY_DISABLE);
return 0;
}
diff --git a/drivers/platform/x86/toshiba_bluetooth.c b/drivers/platform/x86/toshiba_bluetooth.c
index 249800763362..c5e45089ac51 100644
--- a/drivers/platform/x86/toshiba_bluetooth.c
+++ b/drivers/platform/x86/toshiba_bluetooth.c
@@ -10,12 +10,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * Note the Toshiba Bluetooth RFKill switch seems to be a strange
- * fish. It only provides a BT event when the switch is flipped to
- * the 'on' position. When flipping it to 'off', the USB device is
- * simply pulled away underneath us, without any BT event being
- * delivered.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -25,6 +19,7 @@
#include <linux/init.h>
#include <linux/types.h>
#include <linux/acpi.h>
+#include <linux/rfkill.h>
#define BT_KILLSWITCH_MASK 0x01
#define BT_PLUGGED_MASK 0x40
@@ -34,6 +29,15 @@ MODULE_AUTHOR("Jes Sorensen <Jes.Sorensen@gmail.com>");
MODULE_DESCRIPTION("Toshiba Laptop ACPI Bluetooth Enable Driver");
MODULE_LICENSE("GPL");
+struct toshiba_bluetooth_dev {
+ struct acpi_device *acpi_dev;
+ struct rfkill *rfk;
+
+ bool killswitch;
+ bool plugged;
+ bool powered;
+};
+
static int toshiba_bt_rfkill_add(struct acpi_device *device);
static int toshiba_bt_rfkill_remove(struct acpi_device *device);
static void toshiba_bt_rfkill_notify(struct acpi_device *device, u32 event);
@@ -95,41 +99,12 @@ static int toshiba_bluetooth_status(acpi_handle handle)
return -ENXIO;
}
- pr_info("Bluetooth status %llu\n", status);
-
return status;
}
static int toshiba_bluetooth_enable(acpi_handle handle)
{
acpi_status result;
- bool killswitch;
- bool powered;
- bool plugged;
- int status;
-
- /*
- * Query ACPI to verify RFKill switch is set to 'on'.
- * If not, we return silently, no need to report it as
- * an error.
- */
- status = toshiba_bluetooth_status(handle);
- if (status < 0)
- return status;
-
- killswitch = (status & BT_KILLSWITCH_MASK) ? true : false;
- powered = (status & BT_POWER_MASK) ? true : false;
- plugged = (status & BT_PLUGGED_MASK) ? true : false;
-
- if (!killswitch)
- return 0;
- /*
- * This check ensures to only enable the device if it is powered
- * off or detached, as some recent devices somehow pass the killswitch
- * test, causing a loop enabling/disabling the device, see bug 93911.
- */
- if (powered || plugged)
- return 0;
result = acpi_evaluate_object(handle, "AUSB", NULL, NULL);
if (ACPI_FAILURE(result)) {
@@ -165,20 +140,102 @@ static int toshiba_bluetooth_disable(acpi_handle handle)
return 0;
}
+/* Helper function */
+static int toshiba_bluetooth_sync_status(struct toshiba_bluetooth_dev *bt_dev)
+{
+ int status;
+
+ status = toshiba_bluetooth_status(bt_dev->acpi_dev->handle);
+ if (status < 0) {
+ pr_err("Could not sync bluetooth device status\n");
+ return status;
+ }
+
+ bt_dev->killswitch = (status & BT_KILLSWITCH_MASK) ? true : false;
+ bt_dev->plugged = (status & BT_PLUGGED_MASK) ? true : false;
+ bt_dev->powered = (status & BT_POWER_MASK) ? true : false;
+
+ pr_debug("Bluetooth status %d killswitch %d plugged %d powered %d\n",
+ status, bt_dev->killswitch, bt_dev->plugged, bt_dev->powered);
+
+ return 0;
+}
+
+/* RFKill handlers */
+static int bt_rfkill_set_block(void *data, bool blocked)
+{
+ struct toshiba_bluetooth_dev *bt_dev = data;
+ int ret;
+
+ ret = toshiba_bluetooth_sync_status(bt_dev);
+ if (ret)
+ return ret;
+
+ if (!bt_dev->killswitch)
+ return 0;
+
+ if (blocked)
+ ret = toshiba_bluetooth_disable(bt_dev->acpi_dev->handle);
+ else
+ ret = toshiba_bluetooth_enable(bt_dev->acpi_dev->handle);
+
+ return ret;
+}
+
+static void bt_rfkill_poll(struct rfkill *rfkill, void *data)
+{
+ struct toshiba_bluetooth_dev *bt_dev = data;
+
+ if (toshiba_bluetooth_sync_status(bt_dev))
+ return;
+
+ /*
+ * Note the Toshiba Bluetooth RFKill switch seems to be a strange
+ * fish. It only provides a BT event when the switch is flipped to
+ * the 'on' position. When flipping it to 'off', the USB device is
+ * simply pulled away underneath us, without any BT event being
+ * delivered.
+ */
+ rfkill_set_hw_state(bt_dev->rfk, !bt_dev->killswitch);
+}
+
+static const struct rfkill_ops rfk_ops = {
+ .set_block = bt_rfkill_set_block,
+ .poll = bt_rfkill_poll,
+};
+
+/* ACPI driver functions */
static void toshiba_bt_rfkill_notify(struct acpi_device *device, u32 event)
{
- toshiba_bluetooth_enable(device->handle);
+ struct toshiba_bluetooth_dev *bt_dev = acpi_driver_data(device);
+
+ if (toshiba_bluetooth_sync_status(bt_dev))
+ return;
+
+ rfkill_set_hw_state(bt_dev->rfk, !bt_dev->killswitch);
}
#ifdef CONFIG_PM_SLEEP
static int toshiba_bt_resume(struct device *dev)
{
- return toshiba_bluetooth_enable(to_acpi_device(dev)->handle);
+ struct toshiba_bluetooth_dev *bt_dev;
+ int ret;
+
+ bt_dev = acpi_driver_data(to_acpi_device(dev));
+
+ ret = toshiba_bluetooth_sync_status(bt_dev);
+ if (ret)
+ return ret;
+
+ rfkill_set_hw_state(bt_dev->rfk, !bt_dev->killswitch);
+
+ return 0;
}
#endif
static int toshiba_bt_rfkill_add(struct acpi_device *device)
{
+ struct toshiba_bluetooth_dev *bt_dev;
int result;
result = toshiba_bluetooth_present(device->handle);
@@ -187,17 +244,54 @@ static int toshiba_bt_rfkill_add(struct acpi_device *device)
pr_info("Toshiba ACPI Bluetooth device driver\n");
- /* Enable the BT device */
- result = toshiba_bluetooth_enable(device->handle);
- if (result)
+ bt_dev = kzalloc(sizeof(*bt_dev), GFP_KERNEL);
+ if (!bt_dev)
+ return -ENOMEM;
+ bt_dev->acpi_dev = device;
+ device->driver_data = bt_dev;
+ dev_set_drvdata(&device->dev, bt_dev);
+
+ result = toshiba_bluetooth_sync_status(bt_dev);
+ if (result) {
+ kfree(bt_dev);
return result;
+ }
+
+ bt_dev->rfk = rfkill_alloc("Toshiba Bluetooth",
+ &device->dev,
+ RFKILL_TYPE_BLUETOOTH,
+ &rfk_ops,
+ bt_dev);
+ if (!bt_dev->rfk) {
+ pr_err("Unable to allocate rfkill device\n");
+ kfree(bt_dev);
+ return -ENOMEM;
+ }
+
+ rfkill_set_hw_state(bt_dev->rfk, !bt_dev->killswitch);
+
+ result = rfkill_register(bt_dev->rfk);
+ if (result) {
+ pr_err("Unable to register rfkill device\n");
+ rfkill_destroy(bt_dev->rfk);
+ kfree(bt_dev);
+ }
return result;
}
static int toshiba_bt_rfkill_remove(struct acpi_device *device)
{
+ struct toshiba_bluetooth_dev *bt_dev = acpi_driver_data(device);
+
/* clean up */
+ if (bt_dev->rfk) {
+ rfkill_unregister(bt_dev->rfk);
+ rfkill_destroy(bt_dev->rfk);
+ }
+
+ kfree(bt_dev);
+
return toshiba_bluetooth_disable(device->handle);
}
diff --git a/drivers/platform/x86/toshiba_haps.c b/drivers/platform/x86/toshiba_haps.c
index 65300b6a84b9..7f2afc6b5eb9 100644
--- a/drivers/platform/x86/toshiba_haps.c
+++ b/drivers/platform/x86/toshiba_haps.c
@@ -78,15 +78,20 @@ static ssize_t protection_level_store(struct device *dev,
const char *buf, size_t count)
{
struct toshiba_haps_dev *haps = dev_get_drvdata(dev);
- int level, ret;
-
- if (sscanf(buf, "%d", &level) != 1 || level < 0 || level > 3)
- return -EINVAL;
+ int level;
+ int ret;
- /* Set the sensor level.
- * Acceptable levels are:
+ ret = kstrtoint(buf, 0, &level);
+ if (ret)
+ return ret;
+ /*
+ * Check for supported levels, which can be:
* 0 - Disabled | 1 - Low | 2 - Medium | 3 - High
*/
+ if (level < 0 || level > 3)
+ return -EINVAL;
+
+ /* Set the sensor level */
ret = toshiba_haps_protection_level(haps->acpi_dev->handle, level);
if (ret != 0)
return ret;
@@ -95,15 +100,21 @@ static ssize_t protection_level_store(struct device *dev,
return count;
}
+static DEVICE_ATTR_RW(protection_level);
static ssize_t reset_protection_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct toshiba_haps_dev *haps = dev_get_drvdata(dev);
- int reset, ret;
+ int reset;
+ int ret;
- if (sscanf(buf, "%d", &reset) != 1 || reset != 1)
+ ret = kstrtoint(buf, 0, &reset);
+ if (ret)
+ return ret;
+ /* The only accepted value is 1 */
+ if (reset != 1)
return -EINVAL;
/* Reset the protection interface */
@@ -113,10 +124,7 @@ static ssize_t reset_protection_store(struct device *dev,
return count;
}
-
-static DEVICE_ATTR(protection_level, S_IRUGO | S_IWUSR,
- protection_level_show, protection_level_store);
-static DEVICE_ATTR(reset_protection, S_IWUSR, NULL, reset_protection_store);
+static DEVICE_ATTR_WO(reset_protection);
static struct attribute *haps_attributes[] = {
&dev_attr_protection_level.attr,