diff options
Diffstat (limited to 'drivers/regulator/bd71828-regulator.c')
| -rw-r--r-- | drivers/regulator/bd71828-regulator.c | 807 |
1 files changed, 807 insertions, 0 deletions
diff --git a/drivers/regulator/bd71828-regulator.c b/drivers/regulator/bd71828-regulator.c new file mode 100644 index 000000000000..b2fa17be4988 --- /dev/null +++ b/drivers/regulator/bd71828-regulator.c @@ -0,0 +1,807 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2019 ROHM Semiconductors +// bd71828-regulator.c ROHM BD71828GW-DS1 regulator driver +// + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mfd/rohm-bd71828.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> + +struct reg_init { + unsigned int reg; + unsigned int mask; + unsigned int val; +}; +struct bd71828_regulator_data { + struct regulator_desc desc; + const struct rohm_dvs_config dvs; + const struct reg_init *reg_inits; + int reg_init_amnt; +}; + +static const struct reg_init buck1_inits[] = { + /* + * DVS Buck voltages can be changed by register values or via GPIO. + * Use register accesses by default. + */ + { + .reg = BD71828_REG_PS_CTRL_1, + .mask = BD71828_MASK_DVS_BUCK1_CTRL, + .val = BD71828_DVS_BUCK1_CTRL_I2C, + }, +}; + +static const struct reg_init buck2_inits[] = { + { + .reg = BD71828_REG_PS_CTRL_1, + .mask = BD71828_MASK_DVS_BUCK2_CTRL, + .val = BD71828_DVS_BUCK2_CTRL_I2C, + }, +}; + +static const struct reg_init buck6_inits[] = { + { + .reg = BD71828_REG_PS_CTRL_1, + .mask = BD71828_MASK_DVS_BUCK6_CTRL, + .val = BD71828_DVS_BUCK6_CTRL_I2C, + }, +}; + +static const struct reg_init buck7_inits[] = { + { + .reg = BD71828_REG_PS_CTRL_1, + .mask = BD71828_MASK_DVS_BUCK7_CTRL, + .val = BD71828_DVS_BUCK7_CTRL_I2C, + }, +}; + +static const struct regulator_linear_range bd71828_buck1267_volts[] = { + REGULATOR_LINEAR_RANGE(500000, 0x00, 0xef, 6250), + REGULATOR_LINEAR_RANGE(2000000, 0xf0, 0xff, 0), +}; + +static const struct regulator_linear_range bd71828_buck3_volts[] = { + REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x0f, 50000), + REGULATOR_LINEAR_RANGE(2000000, 0x10, 0x1f, 0), +}; + +static const struct regulator_linear_range bd71828_buck4_volts[] = { + REGULATOR_LINEAR_RANGE(1000000, 0x00, 0x1f, 25000), + REGULATOR_LINEAR_RANGE(1800000, 0x20, 0x3f, 0), +}; + +static const struct regulator_linear_range bd71828_buck5_volts[] = { + REGULATOR_LINEAR_RANGE(2500000, 0x00, 0x0f, 50000), + REGULATOR_LINEAR_RANGE(3300000, 0x10, 0x1f, 0), +}; + +static const struct regulator_linear_range bd71828_ldo_volts[] = { + REGULATOR_LINEAR_RANGE(800000, 0x00, 0x31, 50000), + REGULATOR_LINEAR_RANGE(3300000, 0x32, 0x3f, 0), +}; + +static int bd71828_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) +{ + unsigned int val; + + switch (ramp_delay) { + case 1 ... 2500: + val = 0; + break; + case 2501 ... 5000: + val = 1; + break; + case 5001 ... 10000: + val = 2; + break; + case 10001 ... 20000: + val = 3; + break; + default: + val = 3; + dev_err(&rdev->dev, + "ramp_delay: %d not supported, setting 20mV/uS", + ramp_delay); + } + + /* + * On BD71828 the ramp delay level control reg is at offset +2 to + * enable reg + */ + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg + 2, + BD71828_MASK_RAMP_DELAY, + val << (ffs(BD71828_MASK_RAMP_DELAY) - 1)); +} + +static int buck_set_hw_dvs_levels(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *cfg) +{ + struct bd71828_regulator_data *data; + + data = container_of(desc, struct bd71828_regulator_data, desc); + + return rohm_regulator_set_dvs_levels(&data->dvs, np, desc, cfg->regmap); +} + +static int ldo6_parse_dt(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *cfg) +{ + int ret, i; + uint32_t uv = 0; + unsigned int en; + struct regmap *regmap = cfg->regmap; + static const char * const props[] = { "rohm,dvs-run-voltage", + "rohm,dvs-idle-voltage", + "rohm,dvs-suspend-voltage", + "rohm,dvs-lpsr-voltage" }; + unsigned int mask[] = { BD71828_MASK_RUN_EN, BD71828_MASK_IDLE_EN, + BD71828_MASK_SUSP_EN, BD71828_MASK_LPSR_EN }; + + for (i = 0; i < ARRAY_SIZE(props); i++) { + ret = of_property_read_u32(np, props[i], &uv); + if (ret) { + if (ret != -EINVAL) + return ret; + continue; + } + if (uv) + en = 0xffffffff; + else + en = 0; + + ret = regmap_update_bits(regmap, desc->enable_reg, mask[i], en); + if (ret) + return ret; + } + return 0; +} + +static const struct regulator_ops bd71828_buck_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static const struct regulator_ops bd71828_dvs_buck_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = bd71828_set_ramp_delay, +}; + +static const struct regulator_ops bd71828_ldo_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static const struct regulator_ops bd71828_ldo6_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static const struct bd71828_regulator_data bd71828_rdata[] = { + { + .desc = { + .name = "buck1", + .of_match = of_match_ptr("BUCK1"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71828_BUCK1, + .ops = &bd71828_dvs_buck_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd71828_buck1267_volts, + .n_linear_ranges = ARRAY_SIZE(bd71828_buck1267_volts), + .n_voltages = BD71828_BUCK1267_VOLTS, + .enable_reg = BD71828_REG_BUCK1_EN, + .enable_mask = BD71828_MASK_RUN_EN, + .vsel_reg = BD71828_REG_BUCK1_VOLT, + .vsel_mask = BD71828_MASK_BUCK1267_VOLT, + .owner = THIS_MODULE, + .of_parse_cb = buck_set_hw_dvs_levels, + }, + .dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE | + ROHM_DVS_LEVEL_SUSPEND | + ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71828_REG_BUCK1_VOLT, + .run_mask = BD71828_MASK_BUCK1267_VOLT, + .idle_reg = BD71828_REG_BUCK1_IDLE_VOLT, + .idle_mask = BD71828_MASK_BUCK1267_VOLT, + .idle_on_mask = BD71828_MASK_IDLE_EN, + .suspend_reg = BD71828_REG_BUCK1_SUSP_VOLT, + .suspend_mask = BD71828_MASK_BUCK1267_VOLT, + .suspend_on_mask = BD71828_MASK_SUSP_EN, + .lpsr_on_mask = BD71828_MASK_LPSR_EN, + /* + * LPSR voltage is same as SUSPEND voltage. Allow + * setting it so that regulator can be set enabled at + * LPSR state + */ + .lpsr_reg = BD71828_REG_BUCK1_SUSP_VOLT, + .lpsr_mask = BD71828_MASK_BUCK1267_VOLT, + }, + .reg_inits = buck1_inits, + .reg_init_amnt = ARRAY_SIZE(buck1_inits), + }, + { + .desc = { + .name = "buck2", + .of_match = of_match_ptr("BUCK2"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71828_BUCK2, + .ops = &bd71828_dvs_buck_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd71828_buck1267_volts, + .n_linear_ranges = ARRAY_SIZE(bd71828_buck1267_volts), + .n_voltages = BD71828_BUCK1267_VOLTS, + .enable_reg = BD71828_REG_BUCK2_EN, + .enable_mask = BD71828_MASK_RUN_EN, + .vsel_reg = BD71828_REG_BUCK2_VOLT, + .vsel_mask = BD71828_MASK_BUCK1267_VOLT, + .owner = THIS_MODULE, + .of_parse_cb = buck_set_hw_dvs_levels, + }, + .dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE | + ROHM_DVS_LEVEL_SUSPEND | + ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71828_REG_BUCK2_VOLT, + .run_mask = BD71828_MASK_BUCK1267_VOLT, + .idle_reg = BD71828_REG_BUCK2_IDLE_VOLT, + .idle_mask = BD71828_MASK_BUCK1267_VOLT, + .idle_on_mask = BD71828_MASK_IDLE_EN, + .suspend_reg = BD71828_REG_BUCK2_SUSP_VOLT, + .suspend_mask = BD71828_MASK_BUCK1267_VOLT, + .suspend_on_mask = BD71828_MASK_SUSP_EN, + .lpsr_on_mask = BD71828_MASK_LPSR_EN, + .lpsr_reg = BD71828_REG_BUCK2_SUSP_VOLT, + .lpsr_mask = BD71828_MASK_BUCK1267_VOLT, + }, + .reg_inits = buck2_inits, + .reg_init_amnt = ARRAY_SIZE(buck2_inits), + }, + { + .desc = { + .name = "buck3", + .of_match = of_match_ptr("BUCK3"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71828_BUCK3, + .ops = &bd71828_buck_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd71828_buck3_volts, + .n_linear_ranges = ARRAY_SIZE(bd71828_buck3_volts), + .n_voltages = BD71828_BUCK3_VOLTS, + .enable_reg = BD71828_REG_BUCK3_EN, + .enable_mask = BD71828_MASK_RUN_EN, + .vsel_reg = BD71828_REG_BUCK3_VOLT, + .vsel_mask = BD71828_MASK_BUCK3_VOLT, + .owner = THIS_MODULE, + .of_parse_cb = buck_set_hw_dvs_levels, + }, + .dvs = { + /* + * BUCK3 only supports single voltage for all states. + * voltage can be individually enabled for each state + * though => allow setting all states to support + * enabling power rail on different states. + */ + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE | + ROHM_DVS_LEVEL_SUSPEND | + ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71828_REG_BUCK3_VOLT, + .idle_reg = BD71828_REG_BUCK3_VOLT, + .suspend_reg = BD71828_REG_BUCK3_VOLT, + .lpsr_reg = BD71828_REG_BUCK3_VOLT, + .run_mask = BD71828_MASK_BUCK3_VOLT, + .idle_mask = BD71828_MASK_BUCK3_VOLT, + .suspend_mask = BD71828_MASK_BUCK3_VOLT, + .lpsr_mask = BD71828_MASK_BUCK3_VOLT, + .idle_on_mask = BD71828_MASK_IDLE_EN, + .suspend_on_mask = BD71828_MASK_SUSP_EN, + .lpsr_on_mask = BD71828_MASK_LPSR_EN, + }, + }, + { + .desc = { + .name = "buck4", + .of_match = of_match_ptr("BUCK4"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71828_BUCK4, + .ops = &bd71828_buck_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd71828_buck4_volts, + .n_linear_ranges = ARRAY_SIZE(bd71828_buck4_volts), + .n_voltages = BD71828_BUCK4_VOLTS, + .enable_reg = BD71828_REG_BUCK4_EN, + .enable_mask = BD71828_MASK_RUN_EN, + .vsel_reg = BD71828_REG_BUCK4_VOLT, + .vsel_mask = BD71828_MASK_BUCK4_VOLT, + .owner = THIS_MODULE, + .of_parse_cb = buck_set_hw_dvs_levels, + }, + .dvs = { + /* + * BUCK4 only supports single voltage for all states. + * voltage can be individually enabled for each state + * though => allow setting all states to support + * enabling power rail on different states. + */ + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE | + ROHM_DVS_LEVEL_SUSPEND | + ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71828_REG_BUCK4_VOLT, + .idle_reg = BD71828_REG_BUCK4_VOLT, + .suspend_reg = BD71828_REG_BUCK4_VOLT, + .lpsr_reg = BD71828_REG_BUCK4_VOLT, + .run_mask = BD71828_MASK_BUCK4_VOLT, + .idle_mask = BD71828_MASK_BUCK4_VOLT, + .suspend_mask = BD71828_MASK_BUCK4_VOLT, + .lpsr_mask = BD71828_MASK_BUCK4_VOLT, + .idle_on_mask = BD71828_MASK_IDLE_EN, + .suspend_on_mask = BD71828_MASK_SUSP_EN, + .lpsr_on_mask = BD71828_MASK_LPSR_EN, + }, + }, + { + .desc = { + .name = "buck5", + .of_match = of_match_ptr("BUCK5"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71828_BUCK5, + .ops = &bd71828_buck_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd71828_buck5_volts, + .n_linear_ranges = ARRAY_SIZE(bd71828_buck5_volts), + .n_voltages = BD71828_BUCK5_VOLTS, + .enable_reg = BD71828_REG_BUCK5_EN, + .enable_mask = BD71828_MASK_RUN_EN, + .vsel_reg = BD71828_REG_BUCK5_VOLT, + .vsel_mask = BD71828_MASK_BUCK5_VOLT, + .owner = THIS_MODULE, + .of_parse_cb = buck_set_hw_dvs_levels, + }, + .dvs = { + /* + * BUCK5 only supports single voltage for all states. + * voltage can be individually enabled for each state + * though => allow setting all states to support + * enabling power rail on different states. + */ + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE | + ROHM_DVS_LEVEL_SUSPEND | + ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71828_REG_BUCK5_VOLT, + .idle_reg = BD71828_REG_BUCK5_VOLT, + .suspend_reg = BD71828_REG_BUCK5_VOLT, + .lpsr_reg = BD71828_REG_BUCK5_VOLT, + .run_mask = BD71828_MASK_BUCK5_VOLT, + .idle_mask = BD71828_MASK_BUCK5_VOLT, + .suspend_mask = BD71828_MASK_BUCK5_VOLT, + .lpsr_mask = BD71828_MASK_BUCK5_VOLT, + .idle_on_mask = BD71828_MASK_IDLE_EN, + .suspend_on_mask = BD71828_MASK_SUSP_EN, + .lpsr_on_mask = BD71828_MASK_LPSR_EN, + }, + }, + { + .desc = { + .name = "buck6", + .of_match = of_match_ptr("BUCK6"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71828_BUCK6, + .ops = &bd71828_dvs_buck_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd71828_buck1267_volts, + .n_linear_ranges = ARRAY_SIZE(bd71828_buck1267_volts), + .n_voltages = BD71828_BUCK1267_VOLTS, + .enable_reg = BD71828_REG_BUCK6_EN, + .enable_mask = BD71828_MASK_RUN_EN, + .vsel_reg = BD71828_REG_BUCK6_VOLT, + .vsel_mask = BD71828_MASK_BUCK1267_VOLT, + .owner = THIS_MODULE, + .of_parse_cb = buck_set_hw_dvs_levels, + }, + .dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE | + ROHM_DVS_LEVEL_SUSPEND | + ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71828_REG_BUCK6_VOLT, + .run_mask = BD71828_MASK_BUCK1267_VOLT, + .idle_reg = BD71828_REG_BUCK6_IDLE_VOLT, + .idle_mask = BD71828_MASK_BUCK1267_VOLT, + .idle_on_mask = BD71828_MASK_IDLE_EN, + .suspend_reg = BD71828_REG_BUCK6_SUSP_VOLT, + .suspend_mask = BD71828_MASK_BUCK1267_VOLT, + .suspend_on_mask = BD71828_MASK_SUSP_EN, + .lpsr_on_mask = BD71828_MASK_LPSR_EN, + .lpsr_reg = BD71828_REG_BUCK6_SUSP_VOLT, + .lpsr_mask = BD71828_MASK_BUCK1267_VOLT, + }, + .reg_inits = buck6_inits, + .reg_init_amnt = ARRAY_SIZE(buck6_inits), + }, + { + .desc = { + .name = "buck7", + .of_match = of_match_ptr("BUCK7"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71828_BUCK7, + .ops = &bd71828_dvs_buck_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd71828_buck1267_volts, + .n_linear_ranges = ARRAY_SIZE(bd71828_buck1267_volts), + .n_voltages = BD71828_BUCK1267_VOLTS, + .enable_reg = BD71828_REG_BUCK7_EN, + .enable_mask = BD71828_MASK_RUN_EN, + .vsel_reg = BD71828_REG_BUCK7_VOLT, + .vsel_mask = BD71828_MASK_BUCK1267_VOLT, + .owner = THIS_MODULE, + .of_parse_cb = buck_set_hw_dvs_levels, + }, + .dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE | + ROHM_DVS_LEVEL_SUSPEND | + ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71828_REG_BUCK7_VOLT, + .run_mask = BD71828_MASK_BUCK1267_VOLT, + .idle_reg = BD71828_REG_BUCK7_IDLE_VOLT, + .idle_mask = BD71828_MASK_BUCK1267_VOLT, + .idle_on_mask = BD71828_MASK_IDLE_EN, + .suspend_reg = BD71828_REG_BUCK7_SUSP_VOLT, + .suspend_mask = BD71828_MASK_BUCK1267_VOLT, + .suspend_on_mask = BD71828_MASK_SUSP_EN, + .lpsr_on_mask = BD71828_MASK_LPSR_EN, + .lpsr_reg = BD71828_REG_BUCK7_SUSP_VOLT, + .lpsr_mask = BD71828_MASK_BUCK1267_VOLT, + }, + .reg_inits = buck7_inits, + .reg_init_amnt = ARRAY_SIZE(buck7_inits), + }, + { + .desc = { + .name = "ldo1", + .of_match = of_match_ptr("LDO1"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71828_LDO1, + .ops = &bd71828_ldo_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd71828_ldo_volts, + .n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts), + .n_voltages = BD71828_LDO_VOLTS, + .enable_reg = BD71828_REG_LDO1_EN, + .enable_mask = BD71828_MASK_RUN_EN, + .vsel_reg = BD71828_REG_LDO1_VOLT, + .vsel_mask = BD71828_MASK_LDO_VOLT, + .owner = THIS_MODULE, + .of_parse_cb = buck_set_hw_dvs_levels, + }, + .dvs = { + /* + * LDO1 only supports single voltage for all states. + * voltage can be individually enabled for each state + * though => allow setting all states to support + * enabling power rail on different states. + */ + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE | + ROHM_DVS_LEVEL_SUSPEND | + ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71828_REG_LDO1_VOLT, + .idle_reg = BD71828_REG_LDO1_VOLT, + .suspend_reg = BD71828_REG_LDO1_VOLT, + .lpsr_reg = BD71828_REG_LDO1_VOLT, + .run_mask = BD71828_MASK_LDO_VOLT, + .idle_mask = BD71828_MASK_LDO_VOLT, + .suspend_mask = BD71828_MASK_LDO_VOLT, + .lpsr_mask = BD71828_MASK_LDO_VOLT, + .idle_on_mask = BD71828_MASK_IDLE_EN, + .suspend_on_mask = BD71828_MASK_SUSP_EN, + .lpsr_on_mask = BD71828_MASK_LPSR_EN, + }, + }, { + .desc = { + .name = "ldo2", + .of_match = of_match_ptr("LDO2"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71828_LDO2, + .ops = &bd71828_ldo_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd71828_ldo_volts, + .n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts), + .n_voltages = BD71828_LDO_VOLTS, + .enable_reg = BD71828_REG_LDO2_EN, + .enable_mask = BD71828_MASK_RUN_EN, + .vsel_reg = BD71828_REG_LDO2_VOLT, + .vsel_mask = BD71828_MASK_LDO_VOLT, + .owner = THIS_MODULE, + .of_parse_cb = buck_set_hw_dvs_levels, + }, + .dvs = { + /* + * LDO2 only supports single voltage for all states. + * voltage can be individually enabled for each state + * though => allow setting all states to support + * enabling power rail on different states. + */ + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE | + ROHM_DVS_LEVEL_SUSPEND | + ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71828_REG_LDO2_VOLT, + .idle_reg = BD71828_REG_LDO2_VOLT, + .suspend_reg = BD71828_REG_LDO2_VOLT, + .lpsr_reg = BD71828_REG_LDO2_VOLT, + .run_mask = BD71828_MASK_LDO_VOLT, + .idle_mask = BD71828_MASK_LDO_VOLT, + .suspend_mask = BD71828_MASK_LDO_VOLT, + .lpsr_mask = BD71828_MASK_LDO_VOLT, + .idle_on_mask = BD71828_MASK_IDLE_EN, + .suspend_on_mask = BD71828_MASK_SUSP_EN, + .lpsr_on_mask = BD71828_MASK_LPSR_EN, + }, + }, { + .desc = { + .name = "ldo3", + .of_match = of_match_ptr("LDO3"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71828_LDO3, + .ops = &bd71828_ldo_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd71828_ldo_volts, + .n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts), + .n_voltages = BD71828_LDO_VOLTS, + .enable_reg = BD71828_REG_LDO3_EN, + .enable_mask = BD71828_MASK_RUN_EN, + .vsel_reg = BD71828_REG_LDO3_VOLT, + .vsel_mask = BD71828_MASK_LDO_VOLT, + .owner = THIS_MODULE, + .of_parse_cb = buck_set_hw_dvs_levels, + }, + .dvs = { + /* + * LDO3 only supports single voltage for all states. + * voltage can be individually enabled for each state + * though => allow setting all states to support + * enabling power rail on different states. + */ + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE | + ROHM_DVS_LEVEL_SUSPEND | + ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71828_REG_LDO3_VOLT, + .idle_reg = BD71828_REG_LDO3_VOLT, + .suspend_reg = BD71828_REG_LDO3_VOLT, + .lpsr_reg = BD71828_REG_LDO3_VOLT, + .run_mask = BD71828_MASK_LDO_VOLT, + .idle_mask = BD71828_MASK_LDO_VOLT, + .suspend_mask = BD71828_MASK_LDO_VOLT, + .lpsr_mask = BD71828_MASK_LDO_VOLT, + .idle_on_mask = BD71828_MASK_IDLE_EN, + .suspend_on_mask = BD71828_MASK_SUSP_EN, + .lpsr_on_mask = BD71828_MASK_LPSR_EN, + }, + + }, { + .desc = { + .name = "ldo4", + .of_match = of_match_ptr("LDO4"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71828_LDO4, + .ops = &bd71828_ldo_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd71828_ldo_volts, + .n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts), + .n_voltages = BD71828_LDO_VOLTS, + .enable_reg = BD71828_REG_LDO4_EN, + .enable_mask = BD71828_MASK_RUN_EN, + .vsel_reg = BD71828_REG_LDO4_VOLT, + .vsel_mask = BD71828_MASK_LDO_VOLT, + .owner = THIS_MODULE, + .of_parse_cb = buck_set_hw_dvs_levels, + }, + .dvs = { + /* + * LDO1 only supports single voltage for all states. + * voltage can be individually enabled for each state + * though => allow setting all states to support + * enabling power rail on different states. + */ + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE | + ROHM_DVS_LEVEL_SUSPEND | + ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71828_REG_LDO4_VOLT, + .idle_reg = BD71828_REG_LDO4_VOLT, + .suspend_reg = BD71828_REG_LDO4_VOLT, + .lpsr_reg = BD71828_REG_LDO4_VOLT, + .run_mask = BD71828_MASK_LDO_VOLT, + .idle_mask = BD71828_MASK_LDO_VOLT, + .suspend_mask = BD71828_MASK_LDO_VOLT, + .lpsr_mask = BD71828_MASK_LDO_VOLT, + .idle_on_mask = BD71828_MASK_IDLE_EN, + .suspend_on_mask = BD71828_MASK_SUSP_EN, + .lpsr_on_mask = BD71828_MASK_LPSR_EN, + }, + }, { + .desc = { + .name = "ldo5", + .of_match = of_match_ptr("LDO5"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71828_LDO5, + .ops = &bd71828_ldo_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd71828_ldo_volts, + .n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts), + .n_voltages = BD71828_LDO_VOLTS, + .enable_reg = BD71828_REG_LDO5_EN, + .enable_mask = BD71828_MASK_RUN_EN, + .vsel_reg = BD71828_REG_LDO5_VOLT, + .vsel_mask = BD71828_MASK_LDO_VOLT, + .of_parse_cb = buck_set_hw_dvs_levels, + .owner = THIS_MODULE, + }, + /* + * LDO5 is special. It can choose vsel settings to be configured + * from 2 different registers (by GPIO). + * + * This driver supports only configuration where + * BD71828_REG_LDO5_VOLT_L is used. + */ + .dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE | + ROHM_DVS_LEVEL_SUSPEND | + ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71828_REG_LDO5_VOLT, + .idle_reg = BD71828_REG_LDO5_VOLT, + .suspend_reg = BD71828_REG_LDO5_VOLT, + .lpsr_reg = BD71828_REG_LDO5_VOLT, + .run_mask = BD71828_MASK_LDO_VOLT, + .idle_mask = BD71828_MASK_LDO_VOLT, + .suspend_mask = BD71828_MASK_LDO_VOLT, + .lpsr_mask = BD71828_MASK_LDO_VOLT, + .idle_on_mask = BD71828_MASK_IDLE_EN, + .suspend_on_mask = BD71828_MASK_SUSP_EN, + .lpsr_on_mask = BD71828_MASK_LPSR_EN, + }, + + }, { + .desc = { + .name = "ldo6", + .of_match = of_match_ptr("LDO6"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71828_LDO6, + .ops = &bd71828_ldo6_ops, + .type = REGULATOR_VOLTAGE, + .fixed_uV = BD71828_LDO_6_VOLTAGE, + .n_voltages = 1, + .enable_reg = BD71828_REG_LDO6_EN, + .enable_mask = BD71828_MASK_RUN_EN, + .owner = THIS_MODULE, + /* + * LDO6 only supports enable/disable for all states. + * Voltage for LDO6 is fixed. + */ + .of_parse_cb = ldo6_parse_dt, + }, + }, { + .desc = { + /* SNVS LDO in data-sheet */ + .name = "ldo7", + .of_match = of_match_ptr("LDO7"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71828_LDO_SNVS, + .ops = &bd71828_ldo_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd71828_ldo_volts, + .n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts), + .n_voltages = BD71828_LDO_VOLTS, + .enable_reg = BD71828_REG_LDO7_EN, + .enable_mask = BD71828_MASK_RUN_EN, + .vsel_reg = BD71828_REG_LDO7_VOLT, + .vsel_mask = BD71828_MASK_LDO_VOLT, + .owner = THIS_MODULE, + .of_parse_cb = buck_set_hw_dvs_levels, + }, + .dvs = { + /* + * LDO7 only supports single voltage for all states. + * voltage can be individually enabled for each state + * though => allow setting all states to support + * enabling power rail on different states. + */ + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE | + ROHM_DVS_LEVEL_SUSPEND | + ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71828_REG_LDO7_VOLT, + .idle_reg = BD71828_REG_LDO7_VOLT, + .suspend_reg = BD71828_REG_LDO7_VOLT, + .lpsr_reg = BD71828_REG_LDO7_VOLT, + .run_mask = BD71828_MASK_LDO_VOLT, + .idle_mask = BD71828_MASK_LDO_VOLT, + .suspend_mask = BD71828_MASK_LDO_VOLT, + .lpsr_mask = BD71828_MASK_LDO_VOLT, + .idle_on_mask = BD71828_MASK_IDLE_EN, + .suspend_on_mask = BD71828_MASK_SUSP_EN, + .lpsr_on_mask = BD71828_MASK_LPSR_EN, + }, + + }, +}; + +static int bd71828_probe(struct platform_device *pdev) +{ + struct rohm_regmap_dev *bd71828; + int i, j, ret; + struct regulator_config config = { + .dev = pdev->dev.parent, + }; + + bd71828 = dev_get_drvdata(pdev->dev.parent); + if (!bd71828) { + dev_err(&pdev->dev, "No MFD driver data\n"); + return -EINVAL; + } + + config.regmap = bd71828->regmap; + + for (i = 0; i < ARRAY_SIZE(bd71828_rdata); i++) { + struct regulator_dev *rdev; + const struct bd71828_regulator_data *rd; + + rd = &bd71828_rdata[i]; + rdev = devm_regulator_register(&pdev->dev, + &rd->desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, + "failed to register %s regulator\n", + rd->desc.name); + return PTR_ERR(rdev); + } + for (j = 0; j < rd->reg_init_amnt; j++) { + ret = regmap_update_bits(bd71828->regmap, + rd->reg_inits[j].reg, + rd->reg_inits[j].mask, + rd->reg_inits[j].val); + if (ret) { + dev_err(&pdev->dev, + "regulator %s init failed\n", + rd->desc.name); + return ret; + } + } + } + return 0; +} + +static struct platform_driver bd71828_regulator = { + .driver = { + .name = "bd71828-pmic" + }, + .probe = bd71828_probe, +}; + +module_platform_driver(bd71828_regulator); + +MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); +MODULE_DESCRIPTION("BD71828 voltage regulator driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:bd71828-pmic"); |