diff options
Diffstat (limited to 'drivers/regulator/mpq7920.c')
| -rw-r--r-- | drivers/regulator/mpq7920.c | 330 |
1 files changed, 330 insertions, 0 deletions
diff --git a/drivers/regulator/mpq7920.c b/drivers/regulator/mpq7920.c new file mode 100644 index 000000000000..54c862edf571 --- /dev/null +++ b/drivers/regulator/mpq7920.c @@ -0,0 +1,330 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// mpq7920.c - regulator driver for mps mpq7920 +// +// Copyright 2019 Monolithic Power Systems, Inc +// +// Author: Saravanan Sekar <sravanhome@gmail.com> + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include "mpq7920.h" + +#define MPQ7920_BUCK_VOLT_RANGE \ + ((MPQ7920_VOLT_MAX - MPQ7920_BUCK_VOLT_MIN)/MPQ7920_VOLT_STEP + 1) +#define MPQ7920_LDO_VOLT_RANGE \ + ((MPQ7920_VOLT_MAX - MPQ7920_LDO_VOLT_MIN)/MPQ7920_VOLT_STEP + 1) + +#define MPQ7920BUCK(_name, _id, _ilim) \ + [MPQ7920_BUCK ## _id] = { \ + .id = MPQ7920_BUCK ## _id, \ + .name = _name, \ + .of_match = _name, \ + .regulators_node = "regulators", \ + .of_parse_cb = mpq7920_parse_cb, \ + .ops = &mpq7920_buck_ops, \ + .min_uV = MPQ7920_BUCK_VOLT_MIN, \ + .uV_step = MPQ7920_VOLT_STEP, \ + .n_voltages = MPQ7920_BUCK_VOLT_RANGE, \ + .curr_table = _ilim, \ + .n_current_limits = ARRAY_SIZE(_ilim), \ + .csel_reg = MPQ7920_BUCK ##_id## _REG_C, \ + .csel_mask = MPQ7920_MASK_BUCK_ILIM, \ + .enable_reg = MPQ7920_REG_REGULATOR_EN, \ + .enable_mask = BIT(MPQ7920_REGULATOR_EN_OFFSET - \ + MPQ7920_BUCK ## _id), \ + .vsel_reg = MPQ7920_BUCK ##_id## _REG_A, \ + .vsel_mask = MPQ7920_MASK_VREF, \ + .active_discharge_on = MPQ7920_DISCHARGE_ON, \ + .active_discharge_reg = MPQ7920_BUCK ##_id## _REG_B, \ + .active_discharge_mask = MPQ7920_MASK_DISCHARGE, \ + .soft_start_reg = MPQ7920_BUCK ##_id## _REG_C, \ + .soft_start_mask = MPQ7920_MASK_SOFTSTART, \ + .owner = THIS_MODULE, \ + } + +#define MPQ7920LDO(_name, _id, _ops, _ilim, _ilim_sz, _creg, _cmask) \ + [MPQ7920_LDO ## _id] = { \ + .id = MPQ7920_LDO ## _id, \ + .name = _name, \ + .of_match = _name, \ + .regulators_node = "regulators", \ + .ops = _ops, \ + .min_uV = MPQ7920_LDO_VOLT_MIN, \ + .uV_step = MPQ7920_VOLT_STEP, \ + .n_voltages = MPQ7920_LDO_VOLT_RANGE, \ + .vsel_reg = MPQ7920_LDO ##_id## _REG_A, \ + .vsel_mask = MPQ7920_MASK_VREF, \ + .curr_table = _ilim, \ + .n_current_limits = _ilim_sz, \ + .csel_reg = _creg, \ + .csel_mask = _cmask, \ + .enable_reg = (_id == 1) ? 0 : MPQ7920_REG_REGULATOR_EN,\ + .enable_mask = BIT(MPQ7920_REGULATOR_EN_OFFSET - \ + MPQ7920_LDO ##_id + 1), \ + .active_discharge_on = MPQ7920_DISCHARGE_ON, \ + .active_discharge_mask = MPQ7920_MASK_DISCHARGE, \ + .active_discharge_reg = MPQ7920_LDO ##_id## _REG_B, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + } + +enum mpq7920_regulators { + MPQ7920_BUCK1, + MPQ7920_BUCK2, + MPQ7920_BUCK3, + MPQ7920_BUCK4, + MPQ7920_LDO1, /* LDORTC */ + MPQ7920_LDO2, + MPQ7920_LDO3, + MPQ7920_LDO4, + MPQ7920_LDO5, + MPQ7920_MAX_REGULATORS, +}; + +struct mpq7920_regulator_info { + struct regmap *regmap; + struct regulator_desc *rdesc; +}; + +static const struct regmap_config mpq7920_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0x25, +}; + +/* Current limits array (in uA) + * ILIM1 & ILIM3 + */ +static const unsigned int mpq7920_I_limits1[] = { + 4600000, 6600000, 7600000, 9300000 +}; + +/* ILIM2 & ILIM4 */ +static const unsigned int mpq7920_I_limits2[] = { + 2700000, 3900000, 5100000, 6100000 +}; + +/* LDO4 & LDO5 */ +static const unsigned int mpq7920_I_limits3[] = { + 300000, 700000 +}; + +static int mpq7920_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay); +static int mpq7920_parse_cb(struct device_node *np, + const struct regulator_desc *rdesc, + struct regulator_config *config); + +/* RTCLDO not controllable, always ON */ +static const struct regulator_ops mpq7920_ldortc_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, +}; + +static const struct regulator_ops mpq7920_ldo_wo_current_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_active_discharge = regulator_set_active_discharge_regmap, +}; + +static const struct regulator_ops mpq7920_ldo_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_active_discharge = regulator_set_active_discharge_regmap, + .get_current_limit = regulator_get_current_limit_regmap, + .set_current_limit = regulator_set_current_limit_regmap, +}; + +static const struct regulator_ops mpq7920_buck_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_active_discharge = regulator_set_active_discharge_regmap, + .set_soft_start = regulator_set_soft_start_regmap, + .set_ramp_delay = mpq7920_set_ramp_delay, +}; + +static struct regulator_desc mpq7920_regulators_desc[MPQ7920_MAX_REGULATORS] = { + MPQ7920BUCK("buck1", 1, mpq7920_I_limits1), + MPQ7920BUCK("buck2", 2, mpq7920_I_limits2), + MPQ7920BUCK("buck3", 3, mpq7920_I_limits1), + MPQ7920BUCK("buck4", 4, mpq7920_I_limits2), + MPQ7920LDO("ldortc", 1, &mpq7920_ldortc_ops, NULL, 0, 0, 0), + MPQ7920LDO("ldo2", 2, &mpq7920_ldo_wo_current_ops, NULL, 0, 0, 0), + MPQ7920LDO("ldo3", 3, &mpq7920_ldo_wo_current_ops, NULL, 0, 0, 0), + MPQ7920LDO("ldo4", 4, &mpq7920_ldo_ops, mpq7920_I_limits3, + ARRAY_SIZE(mpq7920_I_limits3), MPQ7920_LDO4_REG_B, + MPQ7920_MASK_LDO_ILIM), + MPQ7920LDO("ldo5", 5, &mpq7920_ldo_ops, mpq7920_I_limits3, + ARRAY_SIZE(mpq7920_I_limits3), MPQ7920_LDO5_REG_B, + MPQ7920_MASK_LDO_ILIM), +}; + +/* + * DVS ramp rate BUCK1 to BUCK4 + * 00-01: Reserved + * 10: 8mV/us + * 11: 4mV/us + */ +static int mpq7920_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) +{ + unsigned int ramp_val; + + if (ramp_delay > 8000 || ramp_delay < 0) + return -EINVAL; + + if (ramp_delay <= 4000) + ramp_val = 3; + else + ramp_val = 2; + + return regmap_update_bits(rdev->regmap, MPQ7920_REG_CTL0, + MPQ7920_MASK_DVS_SLEWRATE, ramp_val << 6); +} + +static int mpq7920_parse_cb(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *config) +{ + uint8_t val; + int ret; + struct mpq7920_regulator_info *info = config->driver_data; + struct regulator_desc *rdesc = &info->rdesc[desc->id]; + + if (of_property_read_bool(np, "mps,buck-ovp-disable")) { + regmap_update_bits(config->regmap, + MPQ7920_BUCK1_REG_B + (rdesc->id * 4), + MPQ7920_MASK_OVP, MPQ7920_OVP_DISABLE); + } + + ret = of_property_read_u8(np, "mps,buck-phase-delay", &val); + if (!ret) { + regmap_update_bits(config->regmap, + MPQ7920_BUCK1_REG_C + (rdesc->id * 4), + MPQ7920_MASK_BUCK_PHASE_DEALY, + (val & 3) << 4); + } + + ret = of_property_read_u8(np, "mps,buck-softstart", &val); + if (!ret) + rdesc->soft_start_val_on = (val & 3) << 2; + + return 0; +} + +static void mpq7920_parse_dt(struct device *dev, + struct mpq7920_regulator_info *info) +{ + int ret; + struct device_node *np = dev->of_node; + uint8_t freq; + + np = of_get_child_by_name(np, "regulators"); + if (!np) { + dev_err(dev, "missing 'regulators' subnode in DT\n"); + return; + } + + ret = of_property_read_u8(np, "mps,switch-freq", &freq); + if (!ret) { + regmap_update_bits(info->regmap, MPQ7920_REG_CTL0, + MPQ7920_MASK_SWITCH_FREQ, + (freq & 3) << 4); + } + + of_node_put(np); +} + +static int mpq7920_i2c_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct mpq7920_regulator_info *info; + struct regulator_config config = { NULL, }; + struct regulator_dev *rdev; + struct regmap *regmap; + int i; + + info = devm_kzalloc(dev, sizeof(struct mpq7920_regulator_info), + GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->rdesc = mpq7920_regulators_desc; + regmap = devm_regmap_init_i2c(client, &mpq7920_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "Failed to allocate regmap!\n"); + return PTR_ERR(regmap); + } + + i2c_set_clientdata(client, info); + info->regmap = regmap; + if (client->dev.of_node) + mpq7920_parse_dt(&client->dev, info); + + config.dev = dev; + config.regmap = regmap; + config.driver_data = info; + + for (i = 0; i < MPQ7920_MAX_REGULATORS; i++) { + rdev = devm_regulator_register(dev, + &mpq7920_regulators_desc[i], + &config); + if (IS_ERR(rdev)) { + dev_err(dev, "Failed to register regulator!\n"); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static const struct of_device_id mpq7920_of_match[] = { + { .compatible = "mps,mpq7920"}, + {}, +}; +MODULE_DEVICE_TABLE(of, mpq7920_of_match); + +static const struct i2c_device_id mpq7920_id[] = { + { "mpq7920", }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, mpq7920_id); + +static struct i2c_driver mpq7920_regulator_driver = { + .driver = { + .name = "mpq7920", + .of_match_table = of_match_ptr(mpq7920_of_match), + }, + .probe_new = mpq7920_i2c_probe, + .id_table = mpq7920_id, +}; +module_i2c_driver(mpq7920_regulator_driver); + +MODULE_AUTHOR("Saravanan Sekar <sravanhome@gmail.com>"); +MODULE_DESCRIPTION("MPQ7920 PMIC regulator driver"); +MODULE_LICENSE("GPL"); |