aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/regulator
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/regulator')
-rw-r--r--drivers/regulator/Kconfig17
-rw-r--r--drivers/regulator/Makefile2
-rw-r--r--drivers/regulator/axp20x-regulator.c93
-rw-r--r--drivers/regulator/core.c375
-rw-r--r--drivers/regulator/da9211-regulator.c16
-rw-r--r--drivers/regulator/fan53555.c4
-rw-r--r--drivers/regulator/internal.h2
-rw-r--r--drivers/regulator/isl9305.c6
-rw-r--r--drivers/regulator/lp872x.c24
-rw-r--r--drivers/regulator/max14577.c62
-rw-r--r--drivers/regulator/max77686.c70
-rw-r--r--drivers/regulator/max77843.c227
-rw-r--r--drivers/regulator/max8649.c4
-rw-r--r--drivers/regulator/mt6397-regulator.c332
-rw-r--r--drivers/regulator/of_regulator.c11
-rw-r--r--drivers/regulator/pfuze100-regulator.c134
-rw-r--r--drivers/regulator/qcom_rpm-regulator.c15
-rw-r--r--drivers/regulator/rk808-regulator.c6
-rw-r--r--drivers/regulator/rt5033-regulator.c8
-rw-r--r--drivers/regulator/tps65023-regulator.c6
20 files changed, 1045 insertions, 369 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index c3a60b57a865..a6f116aa5235 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -414,6 +414,14 @@ config REGULATOR_MAX77802
Exynos5420/Exynos5800 SoCs to control various voltages.
It includes support for control of voltage and ramp speed.
+config REGULATOR_MAX77843
+ tristate "Maxim 77843 regulator"
+ depends on MFD_MAX77843
+ help
+ This driver controls a Maxim 77843 regulator.
+ The regulator include two 'SAFEOUT' for USB(Universal Serial Bus)
+ This is suitable for Exynos5433 SoC chips.
+
config REGULATOR_MC13XXX_CORE
tristate
@@ -433,6 +441,15 @@ config REGULATOR_MC13892
Say y here to support the regulators found on the Freescale MC13892
PMIC.
+config REGULATOR_MT6397
+ tristate "MediaTek MT6397 PMIC"
+ depends on MFD_MT6397
+ help
+ Say y here to select this option to enable the power regulator of
+ MediaTek MT6397 PMIC.
+ This driver supports the control of different power rails of device
+ through regulator interface.
+
config REGULATOR_PALMAS
tristate "TI Palmas PMIC Regulators"
depends on MFD_PALMAS
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 1f28ebfc6f3a..2c4da15e1545 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -55,9 +55,11 @@ obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o
obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o
+obj-$(CONFIG_REGULATOR_MAX77843) += max77843.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
+obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index f23d7e1f2ee7..e4331f5e5d7d 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -32,11 +32,13 @@
#define AXP20X_FREQ_DCDC_MASK 0x0f
-#define AXP20X_DESC_IO(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg, \
- _emask, _enable_val, _disable_val) \
+#define AXP20X_DESC_IO(_id, _match, _supply, _min, _max, _step, _vreg, _vmask, \
+ _ereg, _emask, _enable_val, _disable_val) \
[AXP20X_##_id] = { \
.name = #_id, \
.supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = AXP20X_##_id, \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
@@ -52,11 +54,13 @@
.ops = &axp20x_ops, \
}
-#define AXP20X_DESC(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg, \
- _emask) \
+#define AXP20X_DESC(_id, _match, _supply, _min, _max, _step, _vreg, _vmask, \
+ _ereg, _emask) \
[AXP20X_##_id] = { \
.name = #_id, \
.supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = AXP20X_##_id, \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
@@ -70,10 +74,12 @@
.ops = &axp20x_ops, \
}
-#define AXP20X_DESC_FIXED(_id, _supply, _volt) \
+#define AXP20X_DESC_FIXED(_id, _match, _supply, _volt) \
[AXP20X_##_id] = { \
.name = #_id, \
.supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = AXP20X_##_id, \
.n_voltages = 1, \
@@ -82,10 +88,13 @@
.ops = &axp20x_ops_fixed \
}
-#define AXP20X_DESC_TABLE(_id, _supply, _table, _vreg, _vmask, _ereg, _emask) \
+#define AXP20X_DESC_TABLE(_id, _match, _supply, _table, _vreg, _vmask, _ereg, \
+ _emask) \
[AXP20X_##_id] = { \
.name = #_id, \
.supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = AXP20X_##_id, \
.n_voltages = ARRAY_SIZE(_table), \
@@ -127,36 +136,20 @@ static struct regulator_ops axp20x_ops = {
};
static const struct regulator_desc axp20x_regulators[] = {
- AXP20X_DESC(DCDC2, "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, 0x3f,
- AXP20X_PWR_OUT_CTRL, 0x10),
- AXP20X_DESC(DCDC3, "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT, 0x7f,
- AXP20X_PWR_OUT_CTRL, 0x02),
- AXP20X_DESC_FIXED(LDO1, "acin", 1300),
- AXP20X_DESC(LDO2, "ldo24in", 1800, 3300, 100, AXP20X_LDO24_V_OUT, 0xf0,
- AXP20X_PWR_OUT_CTRL, 0x04),
- AXP20X_DESC(LDO3, "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, 0x7f,
- AXP20X_PWR_OUT_CTRL, 0x40),
- AXP20X_DESC_TABLE(LDO4, "ldo24in", axp20x_ldo4_data, AXP20X_LDO24_V_OUT, 0x0f,
- AXP20X_PWR_OUT_CTRL, 0x08),
- AXP20X_DESC_IO(LDO5, "ldo5in", 1800, 3300, 100, AXP20X_LDO5_V_OUT, 0xf0,
- AXP20X_GPIO0_CTRL, 0x07, AXP20X_IO_ENABLED,
- AXP20X_IO_DISABLED),
-};
-
-#define AXP_MATCH(_name, _id) \
- [AXP20X_##_id] = { \
- .name = #_name, \
- .driver_data = (void *) &axp20x_regulators[AXP20X_##_id], \
- }
-
-static struct of_regulator_match axp20x_matches[] = {
- AXP_MATCH(dcdc2, DCDC2),
- AXP_MATCH(dcdc3, DCDC3),
- AXP_MATCH(ldo1, LDO1),
- AXP_MATCH(ldo2, LDO2),
- AXP_MATCH(ldo3, LDO3),
- AXP_MATCH(ldo4, LDO4),
- AXP_MATCH(ldo5, LDO5),
+ AXP20X_DESC(DCDC2, "dcdc2", "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT,
+ 0x3f, AXP20X_PWR_OUT_CTRL, 0x10),
+ AXP20X_DESC(DCDC3, "dcdc3", "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT,
+ 0x7f, AXP20X_PWR_OUT_CTRL, 0x02),
+ AXP20X_DESC_FIXED(LDO1, "ldo1", "acin", 1300),
+ AXP20X_DESC(LDO2, "ldo2", "ldo24in", 1800, 3300, 100,
+ AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04),
+ AXP20X_DESC(LDO3, "ldo3", "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT,
+ 0x7f, AXP20X_PWR_OUT_CTRL, 0x40),
+ AXP20X_DESC_TABLE(LDO4, "ldo4", "ldo24in", axp20x_ldo4_data,
+ AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08),
+ AXP20X_DESC_IO(LDO5, "ldo5", "ldo5in", 1800, 3300, 100,
+ AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07,
+ AXP20X_IO_ENABLED, AXP20X_IO_DISABLED),
};
static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
@@ -193,13 +186,6 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev)
if (!regulators) {
dev_warn(&pdev->dev, "regulators node not found\n");
} else {
- ret = of_regulator_match(&pdev->dev, regulators, axp20x_matches,
- ARRAY_SIZE(axp20x_matches));
- if (ret < 0) {
- dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret);
- return ret;
- }
-
dcdcfreq = 1500;
of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq);
ret = axp20x_set_dcdc_freq(pdev, dcdcfreq);
@@ -233,23 +219,17 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
{
struct regulator_dev *rdev;
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
- struct regulator_config config = { };
- struct regulator_init_data *init_data;
+ struct regulator_config config = {
+ .dev = pdev->dev.parent,
+ .regmap = axp20x->regmap,
+ };
int ret, i;
u32 workmode;
- ret = axp20x_regulator_parse_dt(pdev);
- if (ret)
- return ret;
+ /* This only sets the dcdc freq. Ignore any errors */
+ axp20x_regulator_parse_dt(pdev);
for (i = 0; i < AXP20X_REG_ID_MAX; i++) {
- init_data = axp20x_matches[i].init_data;
-
- config.dev = pdev->dev.parent;
- config.init_data = init_data;
- config.regmap = axp20x->regmap;
- config.of_node = axp20x_matches[i].of_node;
-
rdev = devm_regulator_register(&pdev->dev, &axp20x_regulators[i],
&config);
if (IS_ERR(rdev)) {
@@ -259,7 +239,8 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
return PTR_ERR(rdev);
}
- ret = of_property_read_u32(axp20x_matches[i].of_node, "x-powers,dcdc-workmode",
+ ret = of_property_read_u32(rdev->dev.of_node,
+ "x-powers,dcdc-workmode",
&workmode);
if (!ret) {
if (axp20x_set_dcdc_workmode(rdev, i, workmode))
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 9c48fb32f660..b899947d839d 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -632,49 +632,34 @@ static ssize_t regulator_bypass_show(struct device *dev,
static DEVICE_ATTR(bypass, 0444,
regulator_bypass_show, NULL);
-/*
- * These are the only attributes are present for all regulators.
- * Other attributes are a function of regulator functionality.
- */
-static struct attribute *regulator_dev_attrs[] = {
- &dev_attr_name.attr,
- &dev_attr_num_users.attr,
- &dev_attr_type.attr,
- NULL,
-};
-ATTRIBUTE_GROUPS(regulator_dev);
-
-static void regulator_dev_release(struct device *dev)
-{
- struct regulator_dev *rdev = dev_get_drvdata(dev);
- kfree(rdev);
-}
-
-static struct class regulator_class = {
- .name = "regulator",
- .dev_release = regulator_dev_release,
- .dev_groups = regulator_dev_groups,
-};
-
/* Calculate the new optimum regulator operating mode based on the new total
* consumer load. All locks held by caller */
-static void drms_uA_update(struct regulator_dev *rdev)
+static int drms_uA_update(struct regulator_dev *rdev)
{
struct regulator *sibling;
int current_uA = 0, output_uV, input_uV, err;
unsigned int mode;
+ /*
+ * first check to see if we can set modes at all, otherwise just
+ * tell the consumer everything is OK.
+ */
err = regulator_check_drms(rdev);
- if (err < 0 || !rdev->desc->ops->get_optimum_mode ||
- (!rdev->desc->ops->get_voltage &&
- !rdev->desc->ops->get_voltage_sel) ||
- !rdev->desc->ops->set_mode)
- return;
+ if (err < 0)
+ return 0;
+
+ if (!rdev->desc->ops->get_optimum_mode)
+ return 0;
+
+ if (!rdev->desc->ops->set_mode)
+ return -EINVAL;
/* get output voltage */
output_uV = _regulator_get_voltage(rdev);
- if (output_uV <= 0)
- return;
+ if (output_uV <= 0) {
+ rdev_err(rdev, "invalid output voltage found\n");
+ return -EINVAL;
+ }
/* get input voltage */
input_uV = 0;
@@ -682,8 +667,10 @@ static void drms_uA_update(struct regulator_dev *rdev)
input_uV = regulator_get_voltage(rdev->supply);
if (input_uV <= 0)
input_uV = rdev->constraints->input_uV;
- if (input_uV <= 0)
- return;
+ if (input_uV <= 0) {
+ rdev_err(rdev, "invalid input voltage found\n");
+ return -EINVAL;
+ }
/* calc total requested load */
list_for_each_entry(sibling, &rdev->consumer_list, list)
@@ -695,8 +682,17 @@ static void drms_uA_update(struct regulator_dev *rdev)
/* check the new mode is allowed */
err = regulator_mode_constrain(rdev, &mode);
- if (err == 0)
- rdev->desc->ops->set_mode(rdev, mode);
+ if (err < 0) {
+ rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n",
+ current_uA, input_uV, output_uV);
+ return err;
+ }
+
+ err = rdev->desc->ops->set_mode(rdev, mode);
+ if (err < 0)
+ rdev_err(rdev, "failed to set optimum mode %x\n", mode);
+
+ return err;
}
static int suspend_set_state(struct regulator_dev *rdev,
@@ -3026,75 +3022,13 @@ EXPORT_SYMBOL_GPL(regulator_get_mode);
int regulator_set_optimum_mode(struct regulator *regulator, int uA_load)
{
struct regulator_dev *rdev = regulator->rdev;
- struct regulator *consumer;
- int ret, output_uV, input_uV = 0, total_uA_load = 0;
- unsigned int mode;
-
- if (rdev->supply)
- input_uV = regulator_get_voltage(rdev->supply);
+ int ret;
mutex_lock(&rdev->mutex);
-
- /*
- * first check to see if we can set modes at all, otherwise just
- * tell the consumer everything is OK.
- */
regulator->uA_load = uA_load;
- ret = regulator_check_drms(rdev);
- if (ret < 0) {
- ret = 0;
- goto out;
- }
-
- if (!rdev->desc->ops->get_optimum_mode)
- goto out;
-
- /*
- * we can actually do this so any errors are indicators of
- * potential real failure.
- */
- ret = -EINVAL;
-
- if (!rdev->desc->ops->set_mode)
- goto out;
-
- /* get output voltage */
- output_uV = _regulator_get_voltage(rdev);
- if (output_uV <= 0) {
- rdev_err(rdev, "invalid output voltage found\n");
- goto out;
- }
-
- /* No supply? Use constraint voltage */
- if (input_uV <= 0)
- input_uV = rdev->constraints->input_uV;
- if (input_uV <= 0) {
- rdev_err(rdev, "invalid input voltage found\n");
- goto out;
- }
-
- /* calc total requested load for this regulator */
- list_for_each_entry(consumer, &rdev->consumer_list, list)
- total_uA_load += consumer->uA_load;
-
- mode = rdev->desc->ops->get_optimum_mode(rdev,
- input_uV, output_uV,
- total_uA_load);
- ret = regulator_mode_constrain(rdev, &mode);
- if (ret < 0) {
- rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n",
- total_uA_load, input_uV, output_uV);
- goto out;
- }
-
- ret = rdev->desc->ops->set_mode(rdev, mode);
- if (ret < 0) {
- rdev_err(rdev, "failed to set optimum mode %x\n", mode);
- goto out;
- }
- ret = mode;
-out:
+ ret = drms_uA_update(rdev);
mutex_unlock(&rdev->mutex);
+
return ret;
}
EXPORT_SYMBOL_GPL(regulator_set_optimum_mode);
@@ -3436,126 +3370,136 @@ int regulator_mode_to_status(unsigned int mode)
}
EXPORT_SYMBOL_GPL(regulator_mode_to_status);
+static struct attribute *regulator_dev_attrs[] = {
+ &dev_attr_name.attr,
+ &dev_attr_num_users.attr,
+ &dev_attr_type.attr,
+ &dev_attr_microvolts.attr,
+ &dev_attr_microamps.attr,
+ &dev_attr_opmode.attr,
+ &dev_attr_state.attr,
+ &dev_attr_status.attr,
+ &dev_attr_bypass.attr,
+ &dev_attr_requested_microamps.attr,
+ &dev_attr_min_microvolts.attr,
+ &dev_attr_max_microvolts.attr,
+ &dev_attr_min_microamps.attr,
+ &dev_attr_max_microamps.attr,
+ &dev_attr_suspend_standby_state.attr,
+ &dev_attr_suspend_mem_state.attr,
+ &dev_attr_suspend_disk_state.attr,
+ &dev_attr_suspend_standby_microvolts.attr,
+ &dev_attr_suspend_mem_microvolts.attr,
+ &dev_attr_suspend_disk_microvolts.attr,
+ &dev_attr_suspend_standby_mode.attr,
+ &dev_attr_suspend_mem_mode.attr,
+ &dev_attr_suspend_disk_mode.attr,
+ NULL
+};
+
/*
* To avoid cluttering sysfs (and memory) with useless state, only
* create attributes that can be meaningfully displayed.
*/
-static int add_regulator_attributes(struct regulator_dev *rdev)
+static umode_t regulator_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr, int idx)
{
- struct device *dev = &rdev->dev;
+ struct device *dev = kobj_to_dev(kobj);
+ struct regulator_dev *rdev = container_of(dev, struct regulator_dev, dev);
const struct regulator_ops *ops = rdev->desc->ops;
- int status = 0;
+ umode_t mode = attr->mode;
+
+ /* these three are always present */
+ if (attr == &dev_attr_name.attr ||
+ attr == &dev_attr_num_users.attr ||
+ attr == &dev_attr_type.attr)
+ return mode;
/* some attributes need specific methods to be displayed */
- if ((ops->get_voltage && ops->get_voltage(rdev) >= 0) ||
- (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0) ||
- (ops->list_voltage && ops->list_voltage(rdev, 0) >= 0) ||
- (rdev->desc->fixed_uV && (rdev->desc->n_voltages == 1))) {
- status = device_create_file(dev, &dev_attr_microvolts);
- if (status < 0)
- return status;
- }
- if (ops->get_current_limit) {
- status = device_create_file(dev, &dev_attr_microamps);
- if (status < 0)
- return status;
- }
- if (ops->get_mode) {
- status = device_create_file(dev, &dev_attr_opmode);
- if (status < 0)
- return status;
- }
- if (rdev->ena_pin || ops->is_enabled) {
- status = device_create_file(dev, &dev_attr_state);
- if (status < 0)
- return status;
- }
- if (ops->get_status) {
- status = device_create_file(dev, &dev_attr_status);
- if (status < 0)
- return status;
- }
- if (ops->get_bypass) {
- status = device_create_file(dev, &dev_attr_bypass);
- if (status < 0)
- return status;
+ if (attr == &dev_attr_microvolts.attr) {
+ if ((ops->get_voltage && ops->get_voltage(rdev) >= 0) ||
+ (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0) ||
+ (ops->list_voltage && ops->list_voltage(rdev, 0) >= 0) ||
+ (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1))
+ return mode;
+ return 0;
}
+ if (attr == &dev_attr_microamps.attr)
+ return ops->get_current_limit ? mode : 0;
+
+ if (attr == &dev_attr_opmode.attr)
+ return ops->get_mode ? mode : 0;
+
+ if (attr == &dev_attr_state.attr)
+ return (rdev->ena_pin || ops->is_enabled) ? mode : 0;
+
+ if (attr == &dev_attr_status.attr)
+ return ops->get_status ? mode : 0;
+
+ if (attr == &dev_attr_bypass.attr)
+ return ops->get_bypass ? mode : 0;
+
/* some attributes are type-specific */
- if (rdev->desc->type == REGULATOR_CURRENT) {
- status = device_create_file(dev, &dev_attr_requested_microamps);
- if (status < 0)
- return status;
- }
+ if (attr == &dev_attr_requested_microamps.attr)
+ return rdev->desc->type == REGULATOR_CURRENT ? mode : 0;
/* all the other attributes exist to support constraints;
* don't show them if there are no constraints, or if the
* relevant supporting methods are missing.
*/
if (!rdev->constraints)
- return status;
+ return 0;
/* constraints need specific supporting methods */
- if (ops->set_voltage || ops->set_voltage_sel) {
- status = device_create_file(dev, &dev_attr_min_microvolts);
- if (status < 0)
- return status;
- status = device_create_file(dev, &dev_attr_max_microvolts);
- if (status < 0)
- return status;
- }
- if (ops->set_current_limit) {
- status = device_create_file(dev, &dev_attr_min_microamps);
- if (status < 0)
- return status;
- status = device_create_file(dev, &dev_attr_max_microamps);
- if (status < 0)
- return status;
- }
-
- status = device_create_file(dev, &dev_attr_suspend_standby_state);
- if (status < 0)
- return status;
- status = device_create_file(dev, &dev_attr_suspend_mem_state);
- if (status < 0)
- return status;
- status = device_create_file(dev, &dev_attr_suspend_disk_state);
- if (status < 0)
- return status;
+ if (attr == &dev_attr_min_microvolts.attr ||
+ attr == &dev_attr_max_microvolts.attr)
+ return (ops->set_voltage || ops->set_voltage_sel) ? mode : 0;
+
+ if (attr == &dev_attr_min_microamps.attr ||
+ attr == &dev_attr_max_microamps.attr)
+ return ops->set_current_limit ? mode : 0;
- if (ops->set_suspend_voltage) {
- status = device_create_file(dev,
- &dev_attr_suspend_standby_microvolts);
- if (status < 0)
- return status;
- status = device_create_file(dev,
- &dev_attr_suspend_mem_microvolts);
- if (status < 0)
- return status;
- status = device_create_file(dev,
- &dev_attr_suspend_disk_microvolts);
- if (status < 0)
- return status;
- }
-
- if (ops->set_suspend_mode) {
- status = device_create_file(dev,
- &dev_attr_suspend_standby_mode);
- if (status < 0)
- return status;
- status = device_create_file(dev,
- &dev_attr_suspend_mem_mode);
- if (status < 0)
- return status;
- status = device_create_file(dev,
- &dev_attr_suspend_disk_mode);
- if (status < 0)
- return status;
- }
-
- return status;
+ if (attr == &dev_attr_suspend_standby_state.attr ||
+ attr == &dev_attr_suspend_mem_state.attr ||
+ attr == &dev_attr_suspend_disk_state.attr)
+ return mode;
+
+ if (attr == &dev_attr_suspend_standby_microvolts.attr ||
+ attr == &dev_attr_suspend_mem_microvolts.attr ||
+ attr == &dev_attr_suspend_disk_microvolts.attr)
+ return ops->set_suspend_voltage ? mode : 0;
+
+ if (attr == &dev_attr_suspend_standby_mode.attr ||
+ attr == &dev_attr_suspend_mem_mode.attr ||
+ attr == &dev_attr_suspend_disk_mode.attr)
+ return ops->set_suspend_mode ? mode : 0;
+
+ return mode;
}
+static const struct attribute_group regulator_dev_group = {
+ .attrs = regulator_dev_attrs,
+ .is_visible = regulator_attr_is_visible,
+};
+
+static const struct attribute_group *regulator_dev_groups[] = {
+ &regulator_dev_group,
+ NULL
+};
+
+static void regulator_dev_release(struct device *dev)
+{
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
+ kfree(rdev);
+}
+
+static struct class regulator_class = {
+ .name = "regulator",
+ .dev_release = regulator_dev_release,
+ .dev_groups = regulator_dev_groups,
+};
+
static void rdev_init_debugfs(struct regulator_dev *rdev)
{
rdev->debugfs = debugfs_create_dir(rdev_get_name(rdev), debugfs_root);
@@ -3575,7 +3519,7 @@ static void rdev_init_debugfs(struct regulator_dev *rdev)
/**
* regulator_register - register regulator
* @regulator_desc: regulator to register
- * @config: runtime configuration for regulator
+ * @cfg: runtime configuration for regulator
*
* Called by regulator drivers to register a regulator.
* Returns a valid pointer to struct regulator_dev on success
@@ -3583,20 +3527,21 @@ static void rdev_init_debugfs(struct regulator_dev *rdev)
*/
struct regulator_dev *
regulator_register(const struct regulator_desc *regulator_desc,
- const struct regulator_config *config)
+ const struct regulator_config *cfg)
{
const struct regulation_constraints *constraints = NULL;
const struct regulator_init_data *init_data;
- static atomic_t regulator_no = ATOMIC_INIT(0);
+ struct regulator_config *config = NULL;
+ static atomic_t regulator_no = ATOMIC_INIT(-1);
struct regulator_dev *rdev;
struct device *dev;
int ret, i;
const char *supply = NULL;
- if (regulator_desc == NULL || config == NULL)
+ if (regulator_desc == NULL || cfg == NULL)
return ERR_PTR(-EINVAL);
- dev = config->dev;
+ dev = cfg->dev;
WARN_ON(!dev);
if (regulator_desc->name == NULL || regulator_desc->ops == NULL)
@@ -3626,7 +3571,17 @@ regulator_register(const struct regulator_desc *regulator_desc,
if (rdev == NULL)
return ERR_PTR(-ENOMEM);
- init_data = regulator_of_get_init_data(dev, regulator_desc,
+ /*
+ * Duplicate the config so the driver could override it after
+ * parsing init data.
+ */
+ config = kmemdup(cfg, sizeof(*cfg), GFP_KERNEL);
+ if (config == NULL) {
+ kfree(rdev);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init_data = regulator_of_get_init_data(dev, regulator_desc, config,
&rdev->dev.of_node);
if (!init_data) {
init_data = config->init_data;
@@ -3660,8 +3615,8 @@ regulator_register(const struct regulator_desc *regulator_desc,
/* register with sysfs */
rdev->dev.class = &regulator_class;
rdev->dev.parent = dev;
- dev_set_name(&rdev->dev, "regulator.%d",
- atomic_inc_return(&regulator_no) - 1);
+ dev_set_name(&rdev->dev, "regulator.%lu",
+ (unsigned long) atomic_inc_return(&regulator_no));
ret = device_register(&rdev->dev);
if (ret != 0) {
put_device(&rdev->dev);
@@ -3694,11 +3649,6 @@ regulator_register(const struct regulator_desc *regulator_desc,
if (ret < 0)
goto scrub;
- /* add attributes supported by this regulator */
- ret = add_regulator_attributes(rdev);
- if (ret < 0)
- goto scrub;
-
if (init_data && init_data->supply_regulator)
supply = init_data->supply_regulator;
else if (regulator_desc->supply_name)
@@ -3754,6 +3704,7 @@ add_dev:
rdev_init_debugfs(rdev);
out:
mutex_unlock(&regulator_list_mutex);
+ kfree(config);
return rdev;
unset_supplies:
diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c
index c78d2106d6cb..01343419555e 100644
--- a/drivers/regulator/da9211-regulator.c
+++ b/drivers/regulator/da9211-regulator.c
@@ -24,6 +24,7 @@
#include <linux/regmap.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/of_gpio.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/da9211.h>
#include "da9211-regulator.h"
@@ -276,7 +277,10 @@ static struct da9211_pdata *da9211_parse_regulators_dt(
continue;
pdata->init_data[n] = da9211_matches[i].init_data;
-
+ pdata->reg_node[n] = da9211_matches[i].of_node;
+ pdata->gpio_ren[n] =
+ of_get_named_gpio(da9211_matches[i].of_node,
+ "enable-gpios", 0);
n++;
}
@@ -364,7 +368,15 @@ static int da9211_regulator_init(struct da9211 *chip)
config.dev = chip->dev;
config.driver_data = chip;
config.regmap = chip->regmap;
- config.of_node = chip->dev->of_node;
+ config.of_node = chip->pdata->reg_node[i];
+
+ if (gpio_is_valid(chip->pdata->gpio_ren[i])) {
+ config.ena_gpio = chip->pdata->gpio_ren[i];
+ config.ena_gpio_initialized = true;
+ } else {
+ config.ena_gpio = -EINVAL;
+ config.ena_gpio_initialized = false;
+ }
chip->rdev[i] = devm_regulator_register(chip->dev,
&da9211_regulators[i], &config);
diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index 6c43ab2d5121..3c25db89a021 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -147,7 +147,7 @@ static unsigned int fan53555_get_mode(struct regulator_dev *rdev)
return REGULATOR_MODE_NORMAL;
}
-static int slew_rates[] = {
+static const int slew_rates[] = {
64000,
32000,
16000,
@@ -296,7 +296,7 @@ static int fan53555_regulator_register(struct fan53555_device_info *di,
return PTR_ERR_OR_ZERO(di->rdev);
}
-static struct regmap_config fan53555_regmap_config = {
+static const struct regmap_config fan53555_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
diff --git a/drivers/regulator/internal.h b/drivers/regulator/internal.h
index 80ba2a35a04b..c74ac8734023 100644
--- a/drivers/regulator/internal.h
+++ b/drivers/regulator/internal.h
@@ -38,11 +38,13 @@ struct regulator {
#ifdef CONFIG_OF
struct regulator_init_data *regulator_of_get_init_data(struct device *dev,
const struct regulator_desc *desc,
+ struct regulator_config *config,
struct device_node **node);
#else
static inline struct regulator_init_data *
regulator_of_get_init_data(struct device *dev,
const struct regulator_desc *desc,
+ struct regulator_config *config,
struct device_node **node)
{
return NULL;
diff --git a/drivers/regulator/isl9305.c b/drivers/regulator/isl9305.c
index 92fefd98da58..6e3a15fe00f1 100644
--- a/drivers/regulator/isl9305.c
+++ b/drivers/regulator/isl9305.c
@@ -177,8 +177,10 @@ static int isl9305_i2c_probe(struct i2c_client *i2c,
#ifdef CONFIG_OF
static const struct of_device_id isl9305_dt_ids[] = {
- { .compatible = "isl,isl9305" },
- { .compatible = "isl,isl9305h" },
+ { .compatible = "isl,isl9305" }, /* for backward compat., don't use */
+ { .compatible = "isil,isl9305" },
+ { .compatible = "isl,isl9305h" }, /* for backward compat., don't use */
+ { .compatible = "isil,isl9305h" },
{},
};
#endif
diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c
index 021d64d856bb..3de328ab41f3 100644
--- a/drivers/regulator/lp872x.c
+++ b/drivers/regulator/lp872x.c
@@ -106,7 +106,6 @@ struct lp872x {
struct device *dev;
enum lp872x_id chipid;
struct lp872x_platform_data *pdata;
- struct regulator_dev **regulators;
int num_regulators;
enum lp872x_dvs_state dvs_pin;
int dvs_gpio;
@@ -801,8 +800,6 @@ static int lp872x_regulator_register(struct lp872x *lp)
dev_err(lp->dev, "regulator register err");
return PTR_ERR(rdev);
}
-
- *(lp->regulators + i) = rdev;
}
return 0;
@@ -906,7 +903,7 @@ static struct lp872x_platform_data
static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
{
struct lp872x *lp;
- int ret, size, num_regulators;
+ int ret;
const int lp872x_num_regulators[] = {
[LP8720] = LP8720_NUM_REGULATORS,
[LP8725] = LP8725_NUM_REGULATORS,
@@ -918,38 +915,27 @@ static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
lp = devm_kzalloc(&cl->dev, sizeof(struct lp872x), GFP_KERNEL);
if (!lp)
- goto err_mem;
-
- num_regulators = lp872x_num_regulators[id->driver_data];
- size = sizeof(struct regulator_dev *) * num_regulators;
+ return -ENOMEM;
- lp->regulators = devm_kzalloc(&cl->dev, size, GFP_KERNEL);
- if (!lp->regulators)
- goto err_mem;
+ lp->num_regulators = lp872x_num_regulators[id->driver_data];
lp->regmap = devm_regmap_init_i2c(cl, &lp872x_regmap_config);
if (IS_ERR(lp->regmap)) {
ret = PTR_ERR(lp->regmap);
dev_err(&cl->dev, "regmap init i2c err: %d\n", ret);
- goto err_dev;
+ return ret;
}
lp->dev = &cl->dev;
lp->pdata = dev_get_platdata(&cl->dev);
lp->chipid = id->driver_data;
- lp->num_regulators = num_regulators;
i2c_set_clientdata(cl, lp);
ret = lp872x_config(lp);
if (ret)
- goto err_dev;
+ return ret;
return lp872x_regulator_register(lp);
-
-err_mem:
- return -ENOMEM;
-err_dev:
- return ret;
}
static const struct of_device_id lp872x_dt_ids[] = {
diff --git a/drivers/regulator/max14577.c b/drivers/regulator/max14577.c
index bf9a44c5fdd2..b3678d289619 100644
--- a/drivers/regulator/max14577.c
+++ b/drivers/regulator/max14577.c
@@ -103,6 +103,8 @@ static struct regulator_ops max14577_charger_ops = {
static const struct regulator_desc max14577_supported_regulators[] = {
[MAX14577_SAFEOUT] = {
.name = "SAFEOUT",
+ .of_match = of_match_ptr("SAFEOUT"),
+ .regulators_node = of_match_ptr("regulators"),
.id = MAX14577_SAFEOUT,
.ops = &max14577_safeout_ops,
.type = REGULATOR_VOLTAGE,
@@ -114,6 +116,8 @@ static const struct regulator_desc max14577_supported_regulators[] = {
},
[MAX14577_CHARGER] = {
.name = "CHARGER",
+ .of_match = of_match_ptr("CHARGER"),
+ .regulators_node = of_match_ptr("regulators"),
.id = MAX14577_CHARGER,
.ops = &max14577_charger_ops,
.type = REGULATOR_CURRENT,
@@ -137,6 +141,8 @@ static struct regulator_ops max77836_ldo_ops = {
static const struct regulator_desc max77836_supported_regulators[] = {
[MAX14577_SAFEOUT] = {
.name = "SAFEOUT",
+ .of_match = of_match_ptr("SAFEOUT"),
+ .regulators_node = of_match_ptr("regulators"),
.id = MAX14577_SAFEOUT,
.ops = &max14577_safeout_ops,
.type = REGULATOR_VOLTAGE,
@@ -148,6 +154,8 @@ static const struct regulator_desc max77836_supported_regulators[] = {
},
[MAX14577_CHARGER] = {
.name = "CHARGER",
+ .of_match = of_match_ptr("CHARGER"),
+ .regulators_node = of_match_ptr("regulators"),
.id = MAX14577_CHARGER,
.ops = &max14577_charger_ops,
.type = REGULATOR_CURRENT,
@@ -157,6 +165,8 @@ static const struct regulator_desc max77836_supported_regulators[] = {
},
[MAX77836_LDO1] = {
.name = "LDO1",
+ .of_match = of_match_ptr("LDO1"),
+ .regulators_node = of_match_ptr("regulators"),
.id = MAX77836_LDO1,
.ops = &max77836_ldo_ops,
.type = REGULATOR_VOLTAGE,
@@ -171,6 +181,8 @@ static const struct regulator_desc max77836_supported_regulators[] = {
},
[MAX77836_LDO2] = {
.name = "LDO2",
+ .of_match = of_match_ptr("LDO2"),
+ .regulators_node = of_match_ptr("regulators"),
.id = MAX77836_LDO2,
.ops = &max77836_ldo_ops,
.type = REGULATOR_VOLTAGE,
@@ -198,43 +210,6 @@ static struct of_regulator_match max77836_regulator_matches[] = {
{ .name = "LDO2", },
};
-static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev,
- enum maxim_device_type dev_type)
-{
- int ret;
- struct device_node *np;
- struct of_regulator_match *regulator_matches;
- unsigned int regulator_matches_size;
-
- np = of_get_child_by_name(pdev->dev.parent->of_node, "regulators");
- if (!np) {
- dev_err(&pdev->dev, "Failed to get child OF node for regulators\n");
- return -EINVAL;
- }
-
- switch (dev_type) {
- case MAXIM_DEVICE_TYPE_MAX77836:
- regulator_matches = max77836_regulator_matches;
- regulator_matches_size = ARRAY_SIZE(max77836_regulator_matches);
- break;
- case MAXIM_DEVICE_TYPE_MAX14577:
- default:
- regulator_matches = max14577_regulator_matches;
- regulator_matches_size = ARRAY_SIZE(max14577_regulator_matches);
- }
-
- ret = of_regulator_match(&pdev->dev, np, regulator_matches,
- regulator_matches_size);
- if (ret < 0)
- dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret);
- else
- ret = 0;
-
- of_node_put(np);
-
- return ret;
-}
-
static inline struct regulator_init_data *match_init_data(int index,
enum maxim_device_type dev_type)
{
@@ -261,11 +236,6 @@ static inline struct device_node *match_of_node(int index,
}
}
#else /* CONFIG_OF */
-static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev,
- enum maxim_device_type dev_type)
-{
- return 0;
-}
static inline struct regulator_init_data *match_init_data(int index,
enum maxim_device_type dev_type)
{
@@ -308,16 +278,12 @@ static int max14577_regulator_probe(struct platform_device *pdev)
{
struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent);
struct max14577_platform_data *pdata = dev_get_platdata(max14577->dev);
- int i, ret;
+ int i, ret = 0;
struct regulator_config config = {};
const struct regulator_desc *supported_regulators;
unsigned int supported_regulators_size;
enum maxim_device_type dev_type = max14577->dev_type;
- ret = max14577_regulator_dt_parse_pdata(pdev, dev_type);
- if (ret)
- return ret;
-
switch (dev_type) {
case MAXIM_DEVICE_TYPE_MAX77836:
supported_regulators = max77836_supported_regulators;
@@ -329,7 +295,7 @@ static int max14577_regulator_probe(struct platform_device *pdev)
supported_regulators_size = ARRAY_SIZE(max14577_supported_regulators);
}
- config.dev = &pdev->dev;
+ config.dev = max14577->dev;
config.driver_data = max14577;
for (i = 0; i < supported_regulators_size; i++) {
diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
index 10d206266ac2..15fb1416bfbd 100644
--- a/drivers/regulator/max77686.c
+++ b/drivers/regulator/max77686.c
@@ -26,6 +26,7 @@
#include <linux/bug.h>
#include <linux/err.h>
#include <linux/gpio.h>
+#include <linux/of_gpio.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
@@ -46,6 +47,11 @@
#define MAX77686_DVS_UVSTEP 12500
/*
+ * Value for configuring buck[89] and LDO{20,21,22} as GPIO control.
+ * It is the same as 'off' for other regulators.
+ */
+#define MAX77686_GPIO_CONTROL 0x0
+/*
* Values used for configuring LDOs and bucks.
* Forcing low power mode: LDO1, 3-5, 9, 13, 17-26
*/
@@ -82,6 +88,8 @@ enum max77686_ramp_rate {
};
struct max77686_data {
+ u64 gpio_enabled:MAX77686_REGULATORS;
+
/* Array indexed by regulator id */
unsigned int opmode[MAX77686_REGULATORS];
};
@@ -100,6 +108,26 @@ static unsigned int max77686_get_opmode_shift(int id)
}
}
+/*
+ * When regulator is configured for GPIO control then it
+ * replaces "normal" mode. Any change from low power mode to normal
+ * should actually change to GPIO control.
+ * Map normal mode to proper value for such regulators.
+ */
+static unsigned int max77686_map_normal_mode(struct max77686_data *max77686,
+ int id)
+{
+ switch (id) {
+ case MAX77686_BUCK8:
+ case MAX77686_BUCK9:
+ case MAX77686_LDO20 ... MAX77686_LDO22:
+ if (max77686->gpio_enabled & (1 << id))
+ return MAX77686_GPIO_CONTROL;
+ }
+
+ return MAX77686_NORMAL;
+}
+
/* Some BUCKs and LDOs supports Normal[ON/OFF] mode during suspend */
static int max77686_set_suspend_disable(struct regulator_dev *rdev)
{
@@ -136,7 +164,7 @@ static int max77686_set_suspend_mode(struct regulator_dev *rdev,
val = MAX77686_LDO_LOWPOWER_PWRREQ;
break;
case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
- val = MAX77686_NORMAL;
+ val = max77686_map_normal_mode(max77686, id);
break;
default:
pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
@@ -160,7 +188,7 @@ static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev,
{
unsigned int val;
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
- int ret;
+ int ret, id = rdev_get_id(rdev);
switch (mode) {
case REGULATOR_MODE_STANDBY: /* switch off */
@@ -170,7 +198,7 @@ static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev,
val = MAX77686_LDO_LOWPOWER_PWRREQ;
break;
case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
- val = MAX77686_NORMAL;
+ val = max77686_map_normal_mode(max77686, id);
break;
default:
pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
@@ -184,7 +212,7 @@ static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev,
if (ret)
return ret;
- max77686->opmode[rdev_get_id(rdev)] = val;
+ max77686->opmode[id] = val;
return 0;
}
@@ -197,7 +225,7 @@ static int max77686_enable(struct regulator_dev *rdev)
shift = max77686_get_opmode_shift(id);
if (max77686->opmode[id] == MAX77686_OFF_PWRREQ)
- max77686->opmode[id] = MAX77686_NORMAL;
+ max77686->opmode[id] = max77686_map_normal_mode(max77686, id);
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask,
@@ -229,6 +257,36 @@ static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
MAX77686_RAMP_RATE_MASK, ramp_value << 6);
}
+static int max77686_of_parse_cb(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *config)
+{
+ struct max77686_data *max77686 = config->driver_data;
+
+ switch (desc->id) {
+ case MAX77686_BUCK8:
+ case MAX77686_BUCK9:
+ case MAX77686_LDO20 ... MAX77686_LDO22:
+ config->ena_gpio = of_get_named_gpio(np,
+ "maxim,ena-gpios", 0);
+ config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
+ config->ena_gpio_initialized = true;
+ break;
+ default:
+ return 0;
+ }
+
+ if (gpio_is_valid(config->ena_gpio)) {
+ max77686->gpio_enabled |= (1 << desc->id);
+
+ return regmap_update_bits(config->regmap, desc->enable_reg,
+ desc->enable_mask,
+ MAX77686_GPIO_CONTROL);
+ }
+
+ return 0;
+}
+
static struct regulator_ops max77686_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
@@ -283,6 +341,7 @@ static struct regulator_ops max77686_buck_dvs_ops = {
.name = "LDO"#num, \
.of_match = of_match_ptr("LDO"#num), \
.regulators_node = of_match_ptr("voltage-regulators"), \
+ .of_parse_cb = max77686_of_parse_cb, \
.id = MAX77686_LDO##num, \
.ops = &max77686_ops, \
.type = REGULATOR_VOLTAGE, \
@@ -355,6 +414,7 @@ static struct regulator_ops max77686_buck_dvs_ops = {
.name = "BUCK"#num, \
.of_match = of_match_ptr("BUCK"#num), \
.regulators_node = of_match_ptr("voltage-regulators"), \
+ .of_parse_cb = max77686_of_parse_cb, \
.id = MAX77686_BUCK##num, \
.ops = &max77686_ops, \
.type = REGULATOR_VOLTAGE, \
diff --git a/drivers/regulator/max77843.c b/drivers/regulator/max77843.c
new file mode 100644
index 000000000000..c132ef527cdd
--- /dev/null
+++ b/drivers/regulator/max77843.c
@@ -0,0 +1,227 @@
+/*
+ * max77843.c - Regulator driver for the Maxim MAX77843
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Jaewon Kim <jaewon02.kim@samsung.com>
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/max77843-private.h>
+#include <linux/regulator/of_regulator.h>
+
+enum max77843_regulator_type {
+ MAX77843_SAFEOUT1 = 0,
+ MAX77843_SAFEOUT2,
+ MAX77843_CHARGER,
+
+ MAX77843_NUM,
+};
+
+static const unsigned int max77843_safeout_voltage_table[] = {
+ 4850000,
+ 4900000,
+ 4950000,
+ 3300000,
+};
+
+static int max77843_reg_is_enabled(struct regulator_dev *rdev)
+{
+ struct regmap *regmap = rdev->regmap;
+ int ret;
+ unsigned int reg;
+
+ ret = regmap_read(regmap, rdev->desc->enable_reg, &reg);
+ if (ret) {
+ dev_err(&rdev->dev, "Fialed to read charger register\n");
+ return ret;
+ }
+
+ return (reg & rdev->desc->enable_mask) == rdev->desc->enable_mask;
+}
+
+static int max77843_reg_get_current_limit(struct regulator_dev *rdev)
+{
+ struct regmap *regmap = rdev->regmap;
+ unsigned int chg_min_uA = rdev->constraints->min_uA;
+ unsigned int chg_max_uA = rdev->constraints->max_uA;
+ unsigned int val;
+ int ret;
+ unsigned int reg, sel;
+
+ ret = regmap_read(regmap, MAX77843_CHG_REG_CHG_CNFG_02, &reg);
+ if (ret) {
+ dev_err(&rdev->dev, "Failed to read charger register\n");
+ return ret;
+ }
+
+ sel = reg & MAX77843_CHG_FAST_CHG_CURRENT_MASK;
+
+ if (sel < 0x03)
+ sel = 0;
+ else
+ sel -= 2;
+
+ val = chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel;
+ if (val > chg_max_uA)
+ return -EINVAL;
+
+ return val;
+}
+
+static int max77843_reg_set_current_limit(struct regulator_dev *rdev,
+ int min_uA, int max_uA)
+{
+ struct regmap *regmap = rdev->regmap;
+ unsigned int chg_min_uA = rdev->constraints->min_uA;
+ int sel = 0;
+
+ while (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel < min_uA)
+ sel++;
+
+ if (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel > max_uA)
+ return -EINVAL;
+
+ sel += 2;
+
+ return regmap_write(regmap, MAX77843_CHG_REG_CHG_CNFG_02, sel);
+}
+
+static struct regulator_ops max77843_charger_ops = {
+ .is_enabled = max77843_reg_is_enabled,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_current_limit = max77843_reg_get_current_limit,
+ .set_current_limit = max77843_reg_set_current_limit,
+};
+
+static struct regulator_ops max77843_regulator_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .list_voltage = regulator_list_voltage_table,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_desc max77843_supported_regulators[] = {
+ [MAX77843_SAFEOUT1] = {
+ .name = "SAFEOUT1",
+ .id = MAX77843_SAFEOUT1,
+ .ops = &max77843_regulator_ops,
+ .of_match = of_match_ptr("SAFEOUT1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(max77843_safeout_voltage_table),
+ .volt_table = max77843_safeout_voltage_table,
+ .enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
+ .enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT1,
+ .vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
+ .vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT1_MASK,
+ },
+ [MAX77843_SAFEOUT2] = {
+ .name = "SAFEOUT2",
+ .id = MAX77843_SAFEOUT2,
+ .ops = &max77843_regulator_ops,
+ .of_match = of_match_ptr("SAFEOUT2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(max77843_safeout_voltage_table),
+ .volt_table = max77843_safeout_voltage_table,
+ .enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
+ .enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT2,
+ .vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
+ .vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK,
+ },
+ [MAX77843_CHARGER] = {
+ .name = "CHARGER",
+ .id = MAX77843_CHARGER,
+ .ops = &max77843_charger_ops,
+ .of_match = of_match_ptr("CHARGER"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_CURRENT,
+ .owner = THIS_MODULE,
+ .enable_reg = MAX77843_CHG_REG_CHG_CNFG_00,
+ .enable_mask = MAX77843_CHG_MASK,
+ },
+};
+
+static struct regmap *max77843_get_regmap(struct max77843 *max77843, int reg_id)
+{
+ switch (reg_id) {
+ case MAX77843_SAFEOUT1:
+ case MAX77843_SAFEOUT2:
+ return max77843->regmap;
+ case MAX77843_CHARGER:
+ return max77843->regmap_chg;
+ default:
+ return max77843->regmap;
+ }
+}
+
+static int max77843_regulator_probe(struct platform_device *pdev)
+{
+ struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
+ struct regulator_config config = {};
+ int i;
+
+ config.dev = max77843->dev;
+ config.driver_data = max77843;
+
+ for (i = 0; i < ARRAY_SIZE(max77843_supported_regulators); i++) {
+ struct regulator_dev *regulator;
+
+ config.regmap = max77843_get_regmap(max77843,
+ max77843_supported_regulators[i].id);
+
+ regulator = devm_regulator_register(&pdev->dev,
+ &max77843_supported_regulators[i], &config);
+ if (IS_ERR(regulator)) {
+ dev_err(&pdev->dev,
+ "Failed to regiser regulator-%d\n", i);
+ return PTR_ERR(regulator);
+ }
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id max77843_regulator_id[] = {
+ { "max77843-regulator", },
+ { /* sentinel */ },
+};
+
+static struct platform_driver max77843_regulator_driver = {
+ .driver = {
+ .name = "max77843-regulator",
+ },
+ .probe = max77843_regulator_probe,
+ .id_table = max77843_regulator_id,
+};
+
+static int __init max77843_regulator_init(void)
+{
+ return platform_driver_register(&max77843_regulator_driver);
+}
+subsys_initcall(max77843_regulator_init);
+
+static void __exit max77843_regulator_exit(void)
+{
+ platform_driver_unregister(&max77843_regulator_driver);
+}
+module_exit(max77843_regulator_exit);
+
+MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
+MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
+MODULE_DESCRIPTION("Maxim MAX77843 regulator driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c
index c8bddcc8f911..81229579ece9 100644
--- a/drivers/regulator/max8649.c
+++ b/drivers/regulator/max8649.c
@@ -115,7 +115,7 @@ static unsigned int max8649_get_mode(struct regulator_dev *rdev)
return REGULATOR_MODE_NORMAL;
}
-static struct regulator_ops max8649_dcdc_ops = {
+static const struct regulator_ops max8649_dcdc_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
@@ -143,7 +143,7 @@ static struct regulator_desc dcdc_desc = {
.enable_is_inverted = true,
};
-static struct regmap_config max8649_regmap_config = {
+static const struct regmap_config max8649_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
diff --git a/drivers/regulator/mt6397-regulator.c b/drivers/regulator/mt6397-regulator.c
new file mode 100644
index 000000000000..a5b2f4762677
--- /dev/null
+++ b/drivers/regulator/mt6397-regulator.c
@@ -0,0 +1,332 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Flora Fu <flora.fu@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6397/registers.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6397-regulator.h>
+#include <linux/regulator/of_regulator.h>
+
+/*
+ * MT6397 regulators' information
+ *
+ * @desc: standard fields of regulator description.
+ * @qi: Mask for query enable signal status of regulators
+ * @vselon_reg: Register sections for hardware control mode of bucks
+ * @vselctrl_reg: Register for controlling the buck control mode.
+ * @vselctrl_mask: Mask for query buck's voltage control mode.
+ */
+struct mt6397_regulator_info {
+ struct regulator_desc desc;
+ u32 qi;
+ u32 vselon_reg;
+ u32 vselctrl_reg;
+ u32 vselctrl_mask;
+};
+
+#define MT6397_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \
+ vosel, vosel_mask, voselon, vosel_ctrl) \
+[MT6397_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6397_volt_range_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6397_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = (max - min)/step + 1, \
+ .linear_ranges = volt_ranges, \
+ .n_linear_ranges = ARRAY_SIZE(volt_ranges), \
+ .vsel_reg = vosel, \
+ .vsel_mask = vosel_mask, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(0), \
+ }, \
+ .qi = BIT(13), \
+ .vselon_reg = voselon, \
+ .vselctrl_reg = vosel_ctrl, \
+ .vselctrl_mask = BIT(1), \
+}
+
+#define MT6397_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \
+ vosel_mask) \
+[MT6397_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6397_volt_table_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6397_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = ARRAY_SIZE(ldo_volt_table), \
+ .volt_table = ldo_volt_table, \
+ .vsel_reg = vosel, \
+ .vsel_mask = vosel_mask, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(enbit), \
+ }, \
+ .qi = BIT(15), \
+}
+
+#define MT6397_REG_FIXED(match, vreg, enreg, enbit, volt) \
+[MT6397_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6397_volt_fixed_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6397_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = 1, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(enbit), \
+ .min_uV = volt, \
+ }, \
+ .qi = BIT(15), \
+}
+
+static const struct regulator_linear_range buck_volt_range1[] = {
+ REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250),
+};
+
+static const struct regulator_linear_range buck_volt_range2[] = {
+ REGULATOR_LINEAR_RANGE(800000, 0, 0x7f, 6250),
+};
+
+static const struct regulator_linear_range buck_volt_range3[] = {
+ REGULATOR_LINEAR_RANGE(1500000, 0, 0x1f, 20000),
+};
+
+static const u32 ldo_volt_table1[] = {
+ 1500000, 1800000, 2500000, 2800000,
+};
+
+static const u32 ldo_volt_table2[] = {
+ 1800000, 3300000,
+};
+
+static const u32 ldo_volt_table3[] = {
+ 3000000, 3300000,
+};
+
+static const u32 ldo_volt_table4[] = {
+ 1220000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 3300000,
+};
+
+static const u32 ldo_volt_table5[] = {
+ 1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 3300000,
+};
+
+static const u32 ldo_volt_table5_v2[] = {
+ 1200000, 1000000, 1500000, 1800000, 2500000, 2800000, 3000000, 3300000,
+};
+
+static const u32 ldo_volt_table6[] = {
+ 1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 2000000,
+};
+
+static const u32 ldo_volt_table7[] = {
+ 1300000, 1500000, 1800000, 2000000, 2500000, 2800000, 3000000, 3300000,
+};
+
+static int mt6397_get_status(struct regulator_dev *rdev)
+{
+ int ret;
+ u32 regval;
+ struct mt6397_regulator_info *info = rdev_get_drvdata(rdev);
+
+ ret = regmap_read(rdev->regmap, info->desc.enable_reg, &regval);
+ if (ret != 0) {
+ dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret);
+ return ret;
+ }
+
+ return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
+}
+
+static struct regulator_ops mt6397_volt_range_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_status = mt6397_get_status,
+};
+
+static struct regulator_ops mt6397_volt_table_ops = {
+ .list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_iterate,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_status = mt6397_get_status,
+};
+
+static struct regulator_ops mt6397_volt_fixed_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_status = mt6397_get_status,
+};
+
+/* The array is indexed by id(MT6397_ID_XXX) */
+static struct mt6397_regulator_info mt6397_regulators[] = {
+ MT6397_BUCK("buck_vpca15", VPCA15, 700000, 1493750, 6250,
+ buck_volt_range1, MT6397_VCA15_CON7, MT6397_VCA15_CON9, 0x7f,
+ MT6397_VCA15_CON10, MT6397_VCA15_CON5),
+ MT6397_BUCK("buck_vpca7", VPCA7, 700000, 1493750, 6250,
+ buck_volt_range1, MT6397_VPCA7_CON7, MT6397_VPCA7_CON9, 0x7f,
+ MT6397_VPCA7_CON10, MT6397_VPCA7_CON5),
+ MT6397_BUCK("buck_vsramca15", VSRAMCA15, 700000, 1493750, 6250,
+ buck_volt_range1, MT6397_VSRMCA15_CON7, MT6397_VSRMCA15_CON9,
+ 0x7f, MT6397_VSRMCA15_CON10, MT6397_VSRMCA15_CON5),
+ MT6397_BUCK("buck_vsramca7", VSRAMCA7, 700000, 1493750, 6250,
+ buck_volt_range1, MT6397_VSRMCA7_CON7, MT6397_VSRMCA7_CON9,
+ 0x7f, MT6397_VSRMCA7_CON10, MT6397_VSRMCA7_CON5),
+ MT6397_BUCK("buck_vcore", VCORE, 700000, 1493750, 6250,
+ buck_volt_range1, MT6397_VCORE_CON7, MT6397_VCORE_CON9, 0x7f,
+ MT6397_VCORE_CON10, MT6397_VCORE_CON5),
+ MT6397_BUCK("buck_vgpu", VGPU, 700000, 1493750, 6250, buck_volt_range1,
+ MT6397_VGPU_CON7, MT6397_VGPU_CON9, 0x7f,
+ MT6397_VGPU_CON10, MT6397_VGPU_CON5),
+ MT6397_BUCK("buck_vdrm", VDRM, 800000, 1593750, 6250, buck_volt_range2,
+ MT6397_VDRM_CON7, MT6397_VDRM_CON9, 0x7f,
+ MT6397_VDRM_CON10, MT6397_VDRM_CON5),
+ MT6397_BUCK("buck_vio18", VIO18, 1500000, 2120000, 20000,
+ buck_volt_range3, MT6397_VIO18_CON7, MT6397_VIO18_CON9, 0x1f,
+ MT6397_VIO18_CON10, MT6397_VIO18_CON5),
+ MT6397_REG_FIXED("ldo_vtcxo", VTCXO, MT6397_ANALDO_CON0, 10, 2800000),
+ MT6397_REG_FIXED("ldo_va28", VA28, MT6397_ANALDO_CON1, 14, 2800000),
+ MT6397_LDO("ldo_vcama", VCAMA, ldo_volt_table1,
+ MT6397_ANALDO_CON2, 15, MT6397_ANALDO_CON6, 0xC0),
+ MT6397_REG_FIXED("ldo_vio28", VIO28, MT6397_DIGLDO_CON0, 14, 2800000),
+ MT6397_REG_FIXED("ldo_vusb", VUSB, MT6397_DIGLDO_CON1, 14, 3300000),
+ MT6397_LDO("ldo_vmc", VMC, ldo_volt_table2,
+ MT6397_DIGLDO_CON2, 12, MT6397_DIGLDO_CON29, 0x10),
+ MT6397_LDO("ldo_vmch", VMCH, ldo_volt_table3,
+ MT6397_DIGLDO_CON3, 14, MT6397_DIGLDO_CON17, 0x80),
+ MT6397_LDO("ldo_vemc3v3", VEMC3V3, ldo_volt_table3,
+ MT6397_DIGLDO_CON4, 14, MT6397_DIGLDO_CON18, 0x10),
+ MT6397_LDO("ldo_vgp1", VGP1, ldo_volt_table4,
+ MT6397_DIGLDO_CON5, 15, MT6397_DIGLDO_CON19, 0xE0),
+ MT6397_LDO("ldo_vgp2", VGP2, ldo_volt_table5,
+ MT6397_DIGLDO_CON6, 15, MT6397_DIGLDO_CON20, 0xE0),
+ MT6397_LDO("ldo_vgp3", VGP3, ldo_volt_table5,
+ MT6397_DIGLDO_CON7, 15, MT6397_DIGLDO_CON21, 0xE0),
+ MT6397_LDO("ldo_vgp4", VGP4, ldo_volt_table5,
+ MT6397_DIGLDO_CON8, 15, MT6397_DIGLDO_CON22, 0xE0),
+ MT6397_LDO("ldo_vgp5", VGP5, ldo_volt_table6,
+ MT6397_DIGLDO_CON9, 15, MT6397_DIGLDO_CON23, 0xE0),
+ MT6397_LDO("ldo_vgp6", VGP6, ldo_volt_table5,
+ MT6397_DIGLDO_CON10, 15, MT6397_DIGLDO_CON33, 0xE0),
+ MT6397_LDO("ldo_vibr", VIBR, ldo_volt_table7,
+ MT6397_DIGLDO_CON24, 15, MT6397_DIGLDO_CON25, 0xE00),
+};
+
+static int mt6397_set_buck_vosel_reg(struct platform_device *pdev)
+{
+ struct mt6397_chip *mt6397 = dev_get_drvdata(pdev->dev.parent);
+ int i;
+ u32 regval;
+
+ for (i = 0; i < MT6397_MAX_REGULATOR; i++) {
+ if (mt6397_regulators[i].vselctrl_reg) {
+ if (regmap_read(mt6397->regmap,
+ mt6397_regulators[i].vselctrl_reg,
+ &regval) < 0) {
+ dev_err(&pdev->dev,
+ "Failed to read buck ctrl\n");
+ return -EIO;
+ }
+
+ if (regval & mt6397_regulators[i].vselctrl_mask) {
+ mt6397_regulators[i].desc.vsel_reg =
+ mt6397_regulators[i].vselon_reg;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int mt6397_regulator_probe(struct platform_device *pdev)
+{
+ struct mt6397_chip *mt6397 = dev_get_drvdata(pdev->dev.parent);
+ struct regulator_config config = {};
+ struct regulator_dev *rdev;
+ int i;
+ u32 reg_value, version;
+
+ /* Query buck controller to select activated voltage register part */
+ if (mt6397_set_buck_vosel_reg(pdev))
+ return -EIO;
+
+ /* Read PMIC chip revision to update constraints and voltage table */
+ if (regmap_read(mt6397->regmap, MT6397_CID, &reg_value) < 0) {
+ dev_err(&pdev->dev, "Failed to read Chip ID\n");
+ return -EIO;
+ }
+ dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value);
+
+ version = (reg_value & 0xFF);
+ switch (version) {
+ case MT6397_REGULATOR_ID91:
+ mt6397_regulators[MT6397_ID_VGP2].desc.volt_table =
+ ldo_volt_table5_v2;
+ break;
+ default:
+ break;
+ }
+
+ for (i = 0; i < MT6397_MAX_REGULATOR; i++) {
+ config.dev = &pdev->dev;
+ config.driver_data = &mt6397_regulators[i];
+ config.regmap = mt6397->regmap;
+ rdev = devm_regulator_register(&pdev->dev,
+ &mt6397_regulators[i].desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "failed to register %s\n",
+ mt6397_regulators[i].desc.name);
+ return PTR_ERR(rdev);
+ }
+ }
+
+ return 0;
+}
+
+static struct platform_driver mt6397_regulator_driver = {
+ .driver = {
+ .name = "mt6397-regulator",
+ },
+ .probe = mt6397_regulator_probe,
+};
+
+module_platform_driver(mt6397_regulator_driver);
+
+MODULE_AUTHOR("Flora Fu <flora.fu@mediatek.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6397 PMIC");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mt6397-regulator");
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 91eaaf010524..24e812c48d93 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -270,6 +270,7 @@ EXPORT_SYMBOL_GPL(of_regulator_match);
struct regulator_init_data *regulator_of_get_init_data(struct device *dev,
const struct regulator_desc *desc,
+ struct regulator_config *config,
struct device_node **node)
{
struct device_node *search, *child;
@@ -307,6 +308,16 @@ struct regulator_init_data *regulator_of_get_init_data(struct device *dev,
break;
}
+ if (desc->of_parse_cb) {
+ if (desc->of_parse_cb(child, desc, config)) {
+ dev_err(dev,
+ "driver callback failed to parse DT for regulator %s\n",
+ child->name);
+ init_data = NULL;
+ break;
+ }
+ }
+
of_node_get(child);
*node = child;
break;
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index c879dff597ee..8cc8d1877c44 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -56,7 +56,7 @@
#define PFUZE100_VGEN5VOL 0x70
#define PFUZE100_VGEN6VOL 0x71
-enum chips { PFUZE100, PFUZE200 };
+enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3 };
struct pfuze_regulator {
struct regulator_desc desc;
@@ -80,9 +80,18 @@ static const int pfuze100_vsnvs[] = {
1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000,
};
+static const int pfuze3000_sw2lo[] = {
+ 1500000, 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000,
+};
+
+static const int pfuze3000_sw2hi[] = {
+ 2500000, 2800000, 2850000, 3000000, 3100000, 3150000, 3200000, 3300000,
+};
+
static const struct i2c_device_id pfuze_device_id[] = {
{.name = "pfuze100", .driver_data = PFUZE100},
{.name = "pfuze200", .driver_data = PFUZE200},
+ {.name = "pfuze3000", .driver_data = PFUZE3000},
{ }
};
MODULE_DEVICE_TABLE(i2c, pfuze_device_id);
@@ -90,6 +99,7 @@ MODULE_DEVICE_TABLE(i2c, pfuze_device_id);
static const struct of_device_id pfuze_dt_ids[] = {
{ .compatible = "fsl,pfuze100", .data = (void *)PFUZE100},
{ .compatible = "fsl,pfuze200", .data = (void *)PFUZE200},
+ { .compatible = "fsl,pfuze3000", .data = (void *)PFUZE3000},
{ }
};
MODULE_DEVICE_TABLE(of, pfuze_dt_ids);
@@ -219,6 +229,60 @@ static struct regulator_ops pfuze100_swb_regulator_ops = {
.stby_mask = 0x20, \
}
+#define PFUZE3000_VCC_REG(_chip, _name, base, min, max, step) { \
+ .desc = { \
+ .name = #_name, \
+ .n_voltages = ((max) - (min)) / (step) + 1, \
+ .ops = &pfuze100_ldo_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = _chip ## _ ## _name, \
+ .owner = THIS_MODULE, \
+ .min_uV = (min), \
+ .uV_step = (step), \
+ .vsel_reg = (base), \
+ .vsel_mask = 0x3, \
+ .enable_reg = (base), \
+ .enable_mask = 0x10, \
+ }, \
+ .stby_reg = (base), \
+ .stby_mask = 0x20, \
+}
+
+
+#define PFUZE3000_SW2_REG(_chip, _name, base, min, max, step) { \
+ .desc = { \
+ .name = #_name,\
+ .n_voltages = ((max) - (min)) / (step) + 1, \
+ .ops = &pfuze100_sw_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = _chip ## _ ## _name, \
+ .owner = THIS_MODULE, \
+ .min_uV = (min), \
+ .uV_step = (step), \
+ .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \
+ .vsel_mask = 0x7, \
+ }, \
+ .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \
+ .stby_mask = 0x7, \
+}
+
+#define PFUZE3000_SW3_REG(_chip, _name, base, min, max, step) { \
+ .desc = { \
+ .name = #_name,\
+ .n_voltages = ((max) - (min)) / (step) + 1, \
+ .ops = &pfuze100_sw_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = _chip ## _ ## _name, \
+ .owner = THIS_MODULE, \
+ .min_uV = (min), \
+ .uV_step = (step), \
+ .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \
+ .vsel_mask = 0xf, \
+ }, \
+ .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \
+ .stby_mask = 0xf, \
+}
+
/* PFUZE100 */
static struct pfuze_regulator pfuze100_regulators[] = {
PFUZE100_SW_REG(PFUZE100, SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000),
@@ -254,6 +318,22 @@ static struct pfuze_regulator pfuze200_regulators[] = {
PFUZE100_VGEN_REG(PFUZE200, VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
};
+static struct pfuze_regulator pfuze3000_regulators[] = {
+ PFUZE100_SW_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 700000, 1475000, 25000),
+ PFUZE100_SW_REG(PFUZE3000, SW1B, PFUZE100_SW1CVOL, 700000, 1475000, 25000),
+ PFUZE100_SWB_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo),
+ PFUZE3000_SW3_REG(PFUZE3000, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000),
+ PFUZE100_SWB_REG(PFUZE3000, SWBST, PFUZE100_SWBSTCON1, 0x3, pfuze100_swbst),
+ PFUZE100_SWB_REG(PFUZE3000, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
+ PFUZE100_FIXED_REG(PFUZE3000, VREFDDR, PFUZE100_VREFDDRCON, 750000),
+ PFUZE100_VGEN_REG(PFUZE3000, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000),
+ PFUZE100_VGEN_REG(PFUZE3000, VLDO2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
+ PFUZE3000_VCC_REG(PFUZE3000, VCCSD, PFUZE100_VGEN3VOL, 2850000, 3300000, 150000),
+ PFUZE3000_VCC_REG(PFUZE3000, V33, PFUZE100_VGEN4VOL, 2850000, 3300000, 150000),
+ PFUZE100_VGEN_REG(PFUZE3000, VLDO3, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
+ PFUZE100_VGEN_REG(PFUZE3000, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
+};
+
static struct pfuze_regulator *pfuze_regulators;
#ifdef CONFIG_OF
@@ -294,6 +374,24 @@ static struct of_regulator_match pfuze200_matches[] = {
{ .name = "vgen6", },
};
+/* PFUZE3000 */
+static struct of_regulator_match pfuze3000_matches[] = {
+
+ { .name = "sw1a", },
+ { .name = "sw1b", },
+ { .name = "sw2", },
+ { .name = "sw3", },
+ { .name = "swbst", },
+ { .name = "vsnvs", },
+ { .name = "vrefddr", },
+ { .name = "vldo1", },
+ { .name = "vldo2", },
+ { .name = "vccsd", },
+ { .name = "v33", },
+ { .name = "vldo3", },
+ { .name = "vldo4", },
+};
+
static struct of_regulator_match *pfuze_matches;
static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
@@ -313,6 +411,11 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
}
switch (chip->chip_id) {
+ case PFUZE3000:
+ pfuze_matches = pfuze3000_matches;
+ ret = of_regulator_match(dev, parent, pfuze3000_matches,
+ ARRAY_SIZE(pfuze3000_matches));
+ break;
case PFUZE200:
pfuze_matches = pfuze200_matches;
ret = of_regulator_match(dev, parent, pfuze200_matches,
@@ -378,7 +481,8 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip)
* as ID=8 in PFUZE100
*/
dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8");
- } else if ((value & 0x0f) != pfuze_chip->chip_id) {
+ } else if ((value & 0x0f) != pfuze_chip->chip_id &&
+ (value & 0xf0) >> 4 != pfuze_chip->chip_id) {
/* device id NOT match with your setting */
dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
return -ENODEV;
@@ -417,7 +521,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
int i, ret;
const struct of_device_id *match;
u32 regulator_num;
- u32 sw_check_start, sw_check_end;
+ u32 sw_check_start, sw_check_end, sw_hi = 0x40;
pfuze_chip = devm_kzalloc(&client->dev, sizeof(*pfuze_chip),
GFP_KERNEL);
@@ -458,13 +562,19 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
/* use the right regulators after identify the right device */
switch (pfuze_chip->chip_id) {
+ case PFUZE3000:
+ pfuze_regulators = pfuze3000_regulators;
+ regulator_num = ARRAY_SIZE(pfuze3000_regulators);
+ sw_check_start = PFUZE3000_SW2;
+ sw_check_end = PFUZE3000_SW2;
+ sw_hi = 1 << 3;
+ break;
case PFUZE200:
pfuze_regulators = pfuze200_regulators;
regulator_num = ARRAY_SIZE(pfuze200_regulators);
sw_check_start = PFUZE200_SW2;
sw_check_end = PFUZE200_SW3B;
break;
-
case PFUZE100:
default:
pfuze_regulators = pfuze100_regulators;
@@ -474,7 +584,8 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
break;
}
dev_info(&client->dev, "pfuze%s found.\n",
- (pfuze_chip->chip_id == PFUZE100) ? "100" : "200");
+ (pfuze_chip->chip_id == PFUZE100) ? "100" :
+ ((pfuze_chip->chip_id == PFUZE200) ? "200" : "3000"));
memcpy(pfuze_chip->regulator_descs, pfuze_regulators,
sizeof(pfuze_chip->regulator_descs));
@@ -498,10 +609,15 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
/* SW2~SW4 high bit check and modify the voltage value table */
if (i >= sw_check_start && i <= sw_check_end) {
regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val);
- if (val & 0x40) {
- desc->min_uV = 800000;
- desc->uV_step = 50000;
- desc->n_voltages = 51;
+ if (val & sw_hi) {
+ if (pfuze_chip->chip_id == PFUZE3000) {
+ desc->volt_table = pfuze3000_sw2hi;
+ desc->n_voltages = ARRAY_SIZE(pfuze3000_sw2hi);
+ } else {
+ desc->min_uV = 800000;
+ desc->uV_step = 50000;
+ desc->n_voltages = 51;
+ }
}
}
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
index 8364ff331a81..e8647f7cf25e 100644
--- a/drivers/regulator/qcom_rpm-regulator.c
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -227,9 +227,11 @@ static int rpm_reg_set_mV_sel(struct regulator_dev *rdev,
return uV;
mutex_lock(&vreg->lock);
- vreg->uV = uV;
if (vreg->is_enabled)
- ret = rpm_reg_write(vreg, req, vreg->uV / 1000);
+ ret = rpm_reg_write(vreg, req, uV / 1000);
+
+ if (!ret)
+ vreg->uV = uV;
mutex_unlock(&vreg->lock);
return ret;
@@ -252,9 +254,11 @@ static int rpm_reg_set_uV_sel(struct regulator_dev *rdev,
return uV;
mutex_lock(&vreg->lock);
- vreg->uV = uV;
if (vreg->is_enabled)
- ret = rpm_reg_write(vreg, req, vreg->uV);
+ ret = rpm_reg_write(vreg, req, uV);
+
+ if (!ret)
+ vreg->uV = uV;
mutex_unlock(&vreg->lock);
return ret;
@@ -674,6 +678,7 @@ static int rpm_reg_probe(struct platform_device *pdev)
vreg->desc.owner = THIS_MODULE;
vreg->desc.type = REGULATOR_VOLTAGE;
vreg->desc.name = pdev->dev.of_node->name;
+ vreg->desc.supply_name = "vin";
vreg->rpm = dev_get_drvdata(pdev->dev.parent);
if (!vreg->rpm) {
@@ -768,7 +773,7 @@ static int rpm_reg_probe(struct platform_device *pdev)
break;
}
- if (force_mode < 0) {
+ if (force_mode == -1) {
dev_err(&pdev->dev, "invalid force mode\n");
return -EINVAL;
}
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index c94a3e0f3b91..1f93b752a81c 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -97,7 +97,7 @@ static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
RK808_RAMP_RATE_MASK, ramp_value);
}
-int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
+static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
{
unsigned int reg;
int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
@@ -112,7 +112,7 @@ int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
sel);
}
-int rk808_set_suspend_enable(struct regulator_dev *rdev)
+static int rk808_set_suspend_enable(struct regulator_dev *rdev)
{
unsigned int reg;
@@ -123,7 +123,7 @@ int rk808_set_suspend_enable(struct regulator_dev *rdev)
0);
}
-int rk808_set_suspend_disable(struct regulator_dev *rdev)
+static int rk808_set_suspend_disable(struct regulator_dev *rdev)
{
unsigned int reg;
diff --git a/drivers/regulator/rt5033-regulator.c b/drivers/regulator/rt5033-regulator.c
index 870cc49438db..96d2c18e051a 100644
--- a/drivers/regulator/rt5033-regulator.c
+++ b/drivers/regulator/rt5033-regulator.c
@@ -36,6 +36,8 @@ static struct regulator_ops rt5033_buck_ops = {
static const struct regulator_desc rt5033_supported_regulators[] = {
[RT5033_BUCK] = {
.name = "BUCK",
+ .of_match = of_match_ptr("BUCK"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RT5033_BUCK,
.ops = &rt5033_buck_ops,
.type = REGULATOR_VOLTAGE,
@@ -50,6 +52,8 @@ static const struct regulator_desc rt5033_supported_regulators[] = {
},
[RT5033_LDO] = {
.name = "LDO",
+ .of_match = of_match_ptr("LDO"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RT5033_LDO,
.ops = &rt5033_buck_ops,
.type = REGULATOR_VOLTAGE,
@@ -64,6 +68,8 @@ static const struct regulator_desc rt5033_supported_regulators[] = {
},
[RT5033_SAFE_LDO] = {
.name = "SAFE_LDO",
+ .of_match = of_match_ptr("SAFE_LDO"),
+ .regulators_node = of_match_ptr("regulators"),
.id = RT5033_SAFE_LDO,
.ops = &rt5033_safe_ldo_ops,
.type = REGULATOR_VOLTAGE,
@@ -81,7 +87,7 @@ static int rt5033_regulator_probe(struct platform_device *pdev)
int ret, i;
struct regulator_config config = {};
- config.dev = &pdev->dev;
+ config.dev = rt5033->dev;
config.driver_data = rt5033;
for (i = 0; i < ARRAY_SIZE(rt5033_supported_regulators); i++) {
diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c
index 7380af8bd50d..b941e564b3f3 100644
--- a/drivers/regulator/tps65023-regulator.c
+++ b/drivers/regulator/tps65023-regulator.c
@@ -173,7 +173,7 @@ static int tps65023_dcdc_set_voltage_sel(struct regulator_dev *dev,
}
/* Operations permitted on VDCDCx */
-static struct regulator_ops tps65023_dcdc_ops = {
+static const struct regulator_ops tps65023_dcdc_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
@@ -184,7 +184,7 @@ static struct regulator_ops tps65023_dcdc_ops = {
};
/* Operations permitted on LDOx */
-static struct regulator_ops tps65023_ldo_ops = {
+static const struct regulator_ops tps65023_ldo_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
@@ -194,7 +194,7 @@ static struct regulator_ops tps65023_ldo_ops = {
.map_voltage = regulator_map_voltage_ascend,
};
-static struct regmap_config tps65023_regmap_config = {
+static const struct regmap_config tps65023_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.