diff options
Diffstat (limited to 'drivers/rtc/rtc-ab8500.c')
| -rw-r--r-- | drivers/rtc/rtc-ab8500.c | 138 |
1 files changed, 121 insertions, 17 deletions
diff --git a/drivers/rtc/rtc-ab8500.c b/drivers/rtc/rtc-ab8500.c index e346705aae92..4bcf9ca2818a 100644 --- a/drivers/rtc/rtc-ab8500.c +++ b/drivers/rtc/rtc-ab8500.c @@ -15,7 +15,7 @@ #include <linux/platform_device.h> #include <linux/rtc.h> #include <linux/mfd/abx500.h> -#include <linux/mfd/ab8500.h> +#include <linux/mfd/abx500/ab8500.h> #include <linux/delay.h> #define AB8500_RTC_SOFF_STAT_REG 0x00 @@ -90,7 +90,7 @@ static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm) /* Early AB8500 chips will not clear the rtc read request bit */ if (abx500_get_chip_id(dev) == 0) { - msleep(1); + usleep_range(1000, 1000); } else { /* Wait for some cycles after enabling the rtc read in ab8500 */ while (time_before(jiffies, timeout)) { @@ -102,7 +102,7 @@ static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm) if (!(value & RTC_READ_REQUEST)) break; - msleep(1); + usleep_range(1000, 5000); } } @@ -258,6 +258,109 @@ static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) return ab8500_rtc_irq_enable(dev, alarm->enabled); } + +static int ab8500_rtc_set_calibration(struct device *dev, int calibration) +{ + int retval; + u8 rtccal = 0; + + /* + * Check that the calibration value (which is in units of 0.5 + * parts-per-million) is in the AB8500's range for RtcCalibration + * register. -128 (0x80) is not permitted because the AB8500 uses + * a sign-bit rather than two's complement, so 0x80 is just another + * representation of zero. + */ + if ((calibration < -127) || (calibration > 127)) { + dev_err(dev, "RtcCalibration value outside permitted range\n"); + return -EINVAL; + } + + /* + * The AB8500 uses sign (in bit7) and magnitude (in bits0-7) + * so need to convert to this sort of representation before writing + * into RtcCalibration register... + */ + if (calibration >= 0) + rtccal = 0x7F & calibration; + else + rtccal = ~(calibration - 1) | 0x80; + + retval = abx500_set_register_interruptible(dev, AB8500_RTC, + AB8500_RTC_CALIB_REG, rtccal); + + return retval; +} + +static int ab8500_rtc_get_calibration(struct device *dev, int *calibration) +{ + int retval; + u8 rtccal = 0; + + retval = abx500_get_register_interruptible(dev, AB8500_RTC, + AB8500_RTC_CALIB_REG, &rtccal); + if (retval >= 0) { + /* + * The AB8500 uses sign (in bit7) and magnitude (in bits0-7) + * so need to convert value from RtcCalibration register into + * a two's complement signed value... + */ + if (rtccal & 0x80) + *calibration = 0 - (rtccal & 0x7F); + else + *calibration = 0x7F & rtccal; + } + + return retval; +} + +static ssize_t ab8500_sysfs_store_rtc_calibration(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int retval; + int calibration = 0; + + if (sscanf(buf, " %i ", &calibration) != 1) { + dev_err(dev, "Failed to store RTC calibration attribute\n"); + return -EINVAL; + } + + retval = ab8500_rtc_set_calibration(dev, calibration); + + return retval ? retval : count; +} + +static ssize_t ab8500_sysfs_show_rtc_calibration(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int retval = 0; + int calibration = 0; + + retval = ab8500_rtc_get_calibration(dev, &calibration); + if (retval < 0) { + dev_err(dev, "Failed to read RTC calibration attribute\n"); + sprintf(buf, "0\n"); + return retval; + } + + return sprintf(buf, "%d\n", calibration); +} + +static DEVICE_ATTR(rtc_calibration, S_IRUGO | S_IWUSR, + ab8500_sysfs_show_rtc_calibration, + ab8500_sysfs_store_rtc_calibration); + +static int ab8500_sysfs_rtc_register(struct device *dev) +{ + return device_create_file(dev, &dev_attr_rtc_calibration); +} + +static void ab8500_sysfs_rtc_unregister(struct device *dev) +{ + device_remove_file(dev, &dev_attr_rtc_calibration); +} + static irqreturn_t rtc_alarm_handler(int irq, void *data) { struct rtc_device *rtc = data; @@ -295,7 +398,7 @@ static int __devinit ab8500_rtc_probe(struct platform_device *pdev) return err; /* Wait for reset by the PorRtc */ - msleep(1); + usleep_range(1000, 5000); err = abx500_get_register_interruptible(&pdev->dev, AB8500_RTC, AB8500_RTC_STAT_REG, &rtc_ctrl); @@ -308,6 +411,8 @@ static int __devinit ab8500_rtc_probe(struct platform_device *pdev) return -ENODEV; } + device_init_wakeup(&pdev->dev, true); + rtc = rtc_device_register("ab8500-rtc", &pdev->dev, &ab8500_rtc_ops, THIS_MODULE); if (IS_ERR(rtc)) { @@ -316,8 +421,8 @@ static int __devinit ab8500_rtc_probe(struct platform_device *pdev) return err; } - err = request_threaded_irq(irq, NULL, rtc_alarm_handler, 0, - "ab8500-rtc", rtc); + err = request_threaded_irq(irq, NULL, rtc_alarm_handler, + IRQF_NO_SUSPEND, "ab8500-rtc", rtc); if (err < 0) { rtc_device_unregister(rtc); return err; @@ -325,6 +430,13 @@ static int __devinit ab8500_rtc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, rtc); + + err = ab8500_sysfs_rtc_register(&pdev->dev); + if (err) { + dev_err(&pdev->dev, "sysfs RTC failed to register\n"); + return err; + } + return 0; } @@ -333,6 +445,8 @@ static int __devexit ab8500_rtc_remove(struct platform_device *pdev) struct rtc_device *rtc = platform_get_drvdata(pdev); int irq = platform_get_irq_byname(pdev, "ALARM"); + ab8500_sysfs_rtc_unregister(&pdev->dev); + free_irq(irq, rtc); rtc_device_unregister(rtc); platform_set_drvdata(pdev, NULL); @@ -349,18 +463,8 @@ static struct platform_driver ab8500_rtc_driver = { .remove = __devexit_p(ab8500_rtc_remove), }; -static int __init ab8500_rtc_init(void) -{ - return platform_driver_register(&ab8500_rtc_driver); -} - -static void __exit ab8500_rtc_exit(void) -{ - platform_driver_unregister(&ab8500_rtc_driver); -} +module_platform_driver(ab8500_rtc_driver); -module_init(ab8500_rtc_init); -module_exit(ab8500_rtc_exit); MODULE_AUTHOR("Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>"); MODULE_DESCRIPTION("AB8500 RTC Driver"); MODULE_LICENSE("GPL v2"); |