1 files changed, 27 insertions, 16 deletions

diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index cc5bea9c4b1c..be06d7150de5 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -326,7 +326,7 @@ static void cmos_irq_disable(struct cmos_rtc *cmos, unsigned char mask)
 static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 {
 	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
-       unsigned char   mon, mday, hrs, min, sec, rtc_control;
+	unsigned char mon, mday, hrs, min, sec, rtc_control;
 
 	if (!is_valid_irq(cmos->irq))
 		return -EIO;
@@ -556,17 +556,24 @@ static irqreturn_t cmos_interrupt(int irq, void *p)
 	rtc_control = CMOS_READ(RTC_CONTROL);
 	if (is_hpet_enabled())
 		irqstat = (unsigned long)irq & 0xF0;
-	irqstat &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
+
+	/* If we were suspended, RTC_CONTROL may not be accurate since the
+	 * bios may have cleared it.
+	 */
+	if (!cmos_rtc.suspend_ctrl)
+		irqstat &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
+	else
+		irqstat &= (cmos_rtc.suspend_ctrl & RTC_IRQMASK) | RTC_IRQF;
 
 	/* All Linux RTC alarms should be treated as if they were oneshot.
 	 * Similar code may be needed in system wakeup paths, in case the
 	 * alarm woke the system.
 	 */
 	if (irqstat & RTC_AIE) {
+		cmos_rtc.suspend_ctrl &= ~RTC_AIE;
 		rtc_control &= ~RTC_AIE;
 		CMOS_WRITE(rtc_control, RTC_CONTROL);
 		hpet_mask_rtc_irq_bit(RTC_AIE);
-
 		CMOS_READ(RTC_INTR_FLAGS);
 	}
 	spin_unlock(&rtc_lock);
@@ -691,7 +698,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
 	/* FIXME:
 	 * <asm-generic/rtc.h> doesn't know 12-hour mode either.
 	 */
-       if (is_valid_irq(rtc_irq) && !(rtc_control & RTC_24H)) {
+	if (is_valid_irq(rtc_irq) && !(rtc_control & RTC_24H)) {
 		dev_warn(dev, "only 24-hr supported\n");
 		retval = -ENXIO;
 		goto cleanup1;
@@ -839,21 +846,26 @@ static inline int cmos_poweroff(struct device *dev)
 static int cmos_resume(struct device *dev)
 {
 	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
-	unsigned char	tmp = cmos->suspend_ctrl;
+	unsigned char tmp;
+
+	if (cmos->enabled_wake) {
+		if (cmos->wake_off)
+			cmos->wake_off(dev);
+		else
+			disable_irq_wake(cmos->irq);
+		cmos->enabled_wake = 0;
+	}
 
+	spin_lock_irq(&rtc_lock);
+	tmp = cmos->suspend_ctrl;
+	cmos->suspend_ctrl = 0;
 	/* re-enable any irqs previously active */
 	if (tmp & RTC_IRQMASK) {
 		unsigned char	mask;
 
-		if (cmos->enabled_wake) {
-			if (cmos->wake_off)
-				cmos->wake_off(dev);
-			else
-				disable_irq_wake(cmos->irq);
-			cmos->enabled_wake = 0;
-		}
+		if (device_may_wakeup(dev))
+			hpet_rtc_timer_init();
 
-		spin_lock_irq(&rtc_lock);
 		do {
 			CMOS_WRITE(tmp, RTC_CONTROL);
 			hpet_set_rtc_irq_bit(tmp & RTC_IRQMASK);
@@ -869,10 +881,9 @@ static int cmos_resume(struct device *dev)
 			rtc_update_irq(cmos->rtc, 1, mask);
 			tmp &= ~RTC_AIE;
 			hpet_mask_rtc_irq_bit(RTC_AIE);
-			hpet_rtc_timer_init();
 		} while (mask & RTC_AIE);
-		spin_unlock_irq(&rtc_lock);
 	}
+	spin_unlock_irq(&rtc_lock);
 
 	dev_dbg(dev, "resume, ctrl %02x\n", tmp);
 
@@ -989,7 +1000,7 @@ static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
 {
 	cmos_wake_setup(&pnp->dev);
 
-	if (pnp_port_start(pnp,0) == 0x70 && !pnp_irq_valid(pnp,0))
+	if (pnp_port_start(pnp, 0) == 0x70 && !pnp_irq_valid(pnp, 0))
 		/* Some machines contain a PNP entry for the RTC, but
 		 * don't define the IRQ. It should always be safe to
 		 * hardcode it in these cases