aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/rtc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/rtc')
-rw-r--r--drivers/rtc/Kconfig21
-rw-r--r--drivers/rtc/Makefile2
-rw-r--r--drivers/rtc/hctosys.c18
-rw-r--r--drivers/rtc/interface.c22
-rw-r--r--drivers/rtc/rtc-ab-b5ze-s3.c1035
-rw-r--r--drivers/rtc/rtc-armada38x.c320
-rw-r--r--drivers/rtc/rtc-at91sam9.c2
-rw-r--r--drivers/rtc/rtc-dev.c8
-rw-r--r--drivers/rtc/rtc-efi.c1
-rw-r--r--drivers/rtc/rtc-imxdi.c50
-rw-r--r--drivers/rtc/rtc-isl12057.c348
-rw-r--r--drivers/rtc/rtc-pcf2123.c10
-rw-r--r--drivers/rtc/rtc-rk808.c10
-rw-r--r--drivers/rtc/systohc.c6
14 files changed, 1802 insertions, 51 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index f15cddfeb897..3bc9ddbe5cf7 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -153,6 +153,17 @@ config RTC_DRV_88PM80X
This driver can also be built as a module. If so, the module
will be called rtc-88pm80x.
+config RTC_DRV_ABB5ZES3
+ depends on I2C
+ select REGMAP_I2C
+ tristate "Abracon AB-RTCMC-32.768kHz-B5ZE-S3"
+ help
+ If you say yes here you get support for the Abracon
+ AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ab-b5ze-s3.
+
config RTC_DRV_AS3722
tristate "ams AS3722 RTC driver"
depends on MFD_AS3722
@@ -1269,6 +1280,16 @@ config RTC_DRV_MV
This driver can also be built as a module. If so, the module
will be called rtc-mv.
+config RTC_DRV_ARMADA38X
+ tristate "Armada 38x Marvell SoC RTC"
+ depends on ARCH_MVEBU
+ help
+ If you say yes here you will get support for the in-chip RTC
+ that can be found in the Armada 38x Marvell's SoC device
+
+ This driver can also be built as a module. If so, the module
+ will be called armada38x-rtc.
+
config RTC_DRV_PS3
tristate "PS3 RTC"
depends on PPC_PS3
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index c8ef3e1e6ccd..99ded8b75e95 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -24,6 +24,8 @@ obj-$(CONFIG_RTC_DRV_88PM860X) += rtc-88pm860x.o
obj-$(CONFIG_RTC_DRV_88PM80X) += rtc-88pm80x.o
obj-$(CONFIG_RTC_DRV_AB3100) += rtc-ab3100.o
obj-$(CONFIG_RTC_DRV_AB8500) += rtc-ab8500.o
+obj-$(CONFIG_RTC_DRV_ABB5ZES3) += rtc-ab-b5ze-s3.o
+obj-$(CONFIG_RTC_DRV_ARMADA38X) += rtc-armada38x.o
obj-$(CONFIG_RTC_DRV_AS3722) += rtc-as3722.o
obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o
obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
diff --git a/drivers/rtc/hctosys.c b/drivers/rtc/hctosys.c
index 4aa60d74004e..6c719f23520a 100644
--- a/drivers/rtc/hctosys.c
+++ b/drivers/rtc/hctosys.c
@@ -26,7 +26,7 @@ static int __init rtc_hctosys(void)
{
int err = -ENODEV;
struct rtc_time tm;
- struct timespec tv = {
+ struct timespec64 tv64 = {
.tv_nsec = NSEC_PER_SEC >> 1,
};
struct rtc_device *rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE);
@@ -45,25 +45,17 @@ static int __init rtc_hctosys(void)
}
- err = rtc_valid_tm(&tm);
- if (err) {
- dev_err(rtc->dev.parent,
- "hctosys: invalid date/time\n");
- goto err_invalid;
- }
-
- rtc_tm_to_time(&tm, &tv.tv_sec);
+ tv64.tv_sec = rtc_tm_to_time64(&tm);
- err = do_settimeofday(&tv);
+ err = do_settimeofday64(&tv64);
dev_info(rtc->dev.parent,
"setting system clock to "
- "%d-%02d-%02d %02d:%02d:%02d UTC (%u)\n",
+ "%d-%02d-%02d %02d:%02d:%02d UTC (%lld)\n",
tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
tm.tm_hour, tm.tm_min, tm.tm_sec,
- (unsigned int) tv.tv_sec);
+ (long long) tv64.tv_sec);
-err_invalid:
err_read:
rtc_class_close(rtc);
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 45bfc28ee3aa..37215cf983e9 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -73,10 +73,8 @@ int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm)
else if (rtc->ops->set_time)
err = rtc->ops->set_time(rtc->dev.parent, tm);
else if (rtc->ops->set_mmss) {
- unsigned long secs;
- err = rtc_tm_to_time(tm, &secs);
- if (err == 0)
- err = rtc->ops->set_mmss(rtc->dev.parent, secs);
+ time64_t secs64 = rtc_tm_to_time64(tm);
+ err = rtc->ops->set_mmss(rtc->dev.parent, secs64);
} else
err = -EINVAL;
@@ -105,7 +103,7 @@ int rtc_set_mmss(struct rtc_device *rtc, unsigned long secs)
err = rtc->ops->read_time(rtc->dev.parent, &old);
if (err == 0) {
- rtc_time_to_tm(secs, &new);
+ rtc_time64_to_tm(secs, &new);
/*
* avoid writing when we're going to change the day of
@@ -157,7 +155,7 @@ int __rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
int err;
struct rtc_time before, now;
int first_time = 1;
- unsigned long t_now, t_alm;
+ time64_t t_now, t_alm;
enum { none, day, month, year } missing = none;
unsigned days;
@@ -258,8 +256,8 @@ int __rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
}
/* with luck, no rollover is needed */
- rtc_tm_to_time(&now, &t_now);
- rtc_tm_to_time(&alarm->time, &t_alm);
+ t_now = rtc_tm_to_time64(&now);
+ t_alm = rtc_tm_to_time64(&alarm->time);
if (t_now < t_alm)
goto done;
@@ -273,7 +271,7 @@ int __rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
case day:
dev_dbg(&rtc->dev, "alarm rollover: %s\n", "day");
t_alm += 24 * 60 * 60;
- rtc_time_to_tm(t_alm, &alarm->time);
+ rtc_time64_to_tm(t_alm, &alarm->time);
break;
/* Month rollover ... if it's the 31th, an alarm on the 3rd will
@@ -346,19 +344,19 @@ EXPORT_SYMBOL_GPL(rtc_read_alarm);
static int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
{
struct rtc_time tm;
- long now, scheduled;
+ time64_t now, scheduled;
int err;
err = rtc_valid_tm(&alarm->time);
if (err)
return err;
- rtc_tm_to_time(&alarm->time, &scheduled);
+ scheduled = rtc_tm_to_time64(&alarm->time);
/* Make sure we're not setting alarms in the past */
err = __rtc_read_time(rtc, &tm);
if (err)
return err;
- rtc_tm_to_time(&tm, &now);
+ now = rtc_tm_to_time64(&tm);
if (scheduled <= now)
return -ETIME;
/*
diff --git a/drivers/rtc/rtc-ab-b5ze-s3.c b/drivers/rtc/rtc-ab-b5ze-s3.c
new file mode 100644
index 000000000000..cfc2ef98d393
--- /dev/null
+++ b/drivers/rtc/rtc-ab-b5ze-s3.c
@@ -0,0 +1,1035 @@
+/*
+ * rtc-ab-b5ze-s3 - Driver for Abracon AB-RTCMC-32.768Khz-B5ZE-S3
+ * I2C RTC / Alarm chip
+ *
+ * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * Detailed datasheet of the chip is available here:
+ *
+ * http://www.abracon.com/realtimeclock/AB-RTCMC-32.768kHz-B5ZE-S3-Application-Manual.pdf
+ *
+ * This work is based on ISL12057 driver (drivers/rtc/rtc-isl12057.c).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/rtc.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/interrupt.h>
+
+#define DRV_NAME "rtc-ab-b5ze-s3"
+
+/* Control section */
+#define ABB5ZES3_REG_CTRL1 0x00 /* Control 1 register */
+#define ABB5ZES3_REG_CTRL1_CIE BIT(0) /* Pulse interrupt enable */
+#define ABB5ZES3_REG_CTRL1_AIE BIT(1) /* Alarm interrupt enable */
+#define ABB5ZES3_REG_CTRL1_SIE BIT(2) /* Second interrupt enable */
+#define ABB5ZES3_REG_CTRL1_PM BIT(3) /* 24h/12h mode */
+#define ABB5ZES3_REG_CTRL1_SR BIT(4) /* Software reset */
+#define ABB5ZES3_REG_CTRL1_STOP BIT(5) /* RTC circuit enable */
+#define ABB5ZES3_REG_CTRL1_CAP BIT(7)
+
+#define ABB5ZES3_REG_CTRL2 0x01 /* Control 2 register */
+#define ABB5ZES3_REG_CTRL2_CTBIE BIT(0) /* Countdown timer B int. enable */
+#define ABB5ZES3_REG_CTRL2_CTAIE BIT(1) /* Countdown timer A int. enable */
+#define ABB5ZES3_REG_CTRL2_WTAIE BIT(2) /* Watchdog timer A int. enable */
+#define ABB5ZES3_REG_CTRL2_AF BIT(3) /* Alarm interrupt status */
+#define ABB5ZES3_REG_CTRL2_SF BIT(4) /* Second interrupt status */
+#define ABB5ZES3_REG_CTRL2_CTBF BIT(5) /* Countdown timer B int. status */
+#define ABB5ZES3_REG_CTRL2_CTAF BIT(6) /* Countdown timer A int. status */
+#define ABB5ZES3_REG_CTRL2_WTAF BIT(7) /* Watchdog timer A int. status */
+
+#define ABB5ZES3_REG_CTRL3 0x02 /* Control 3 register */
+#define ABB5ZES3_REG_CTRL3_PM2 BIT(7) /* Power Management bit 2 */
+#define ABB5ZES3_REG_CTRL3_PM1 BIT(6) /* Power Management bit 1 */
+#define ABB5ZES3_REG_CTRL3_PM0 BIT(5) /* Power Management bit 0 */
+#define ABB5ZES3_REG_CTRL3_BSF BIT(3) /* Battery switchover int. status */
+#define ABB5ZES3_REG_CTRL3_BLF BIT(2) /* Battery low int. status */
+#define ABB5ZES3_REG_CTRL3_BSIE BIT(1) /* Battery switchover int. enable */
+#define ABB5ZES3_REG_CTRL3_BLIE BIT(0) /* Battery low int. enable */
+
+#define ABB5ZES3_CTRL_SEC_LEN 3
+
+/* RTC section */
+#define ABB5ZES3_REG_RTC_SC 0x03 /* RTC Seconds register */
+#define ABB5ZES3_REG_RTC_SC_OSC BIT(7) /* Clock integrity status */
+#define ABB5ZES3_REG_RTC_MN 0x04 /* RTC Minutes register */
+#define ABB5ZES3_REG_RTC_HR 0x05 /* RTC Hours register */
+#define ABB5ZES3_REG_RTC_HR_PM BIT(5) /* RTC Hours PM bit */
+#define ABB5ZES3_REG_RTC_DT 0x06 /* RTC Date register */
+#define ABB5ZES3_REG_RTC_DW 0x07 /* RTC Day of the week register */
+#define ABB5ZES3_REG_RTC_MO 0x08 /* RTC Month register */
+#define ABB5ZES3_REG_RTC_YR 0x09 /* RTC Year register */
+
+#define ABB5ZES3_RTC_SEC_LEN 7
+
+/* Alarm section (enable bits are all active low) */
+#define ABB5ZES3_REG_ALRM_MN 0x0A /* Alarm - minute register */
+#define ABB5ZES3_REG_ALRM_MN_AE BIT(7) /* Minute enable */
+#define ABB5ZES3_REG_ALRM_HR 0x0B /* Alarm - hours register */
+#define ABB5ZES3_REG_ALRM_HR_AE BIT(7) /* Hour enable */
+#define ABB5ZES3_REG_ALRM_DT 0x0C /* Alarm - date register */
+#define ABB5ZES3_REG_ALRM_DT_AE BIT(7) /* Date (day of the month) enable */
+#define ABB5ZES3_REG_ALRM_DW 0x0D /* Alarm - day of the week reg. */
+#define ABB5ZES3_REG_ALRM_DW_AE BIT(7) /* Day of the week enable */
+
+#define ABB5ZES3_ALRM_SEC_LEN 4
+
+/* Frequency offset section */
+#define ABB5ZES3_REG_FREQ_OF 0x0E /* Frequency offset register */
+#define ABB5ZES3_REG_FREQ_OF_MODE 0x0E /* Offset mode: 2 hours / minute */
+
+/* CLOCKOUT section */
+#define ABB5ZES3_REG_TIM_CLK 0x0F /* Timer & Clockout register */
+#define ABB5ZES3_REG_TIM_CLK_TAM BIT(7) /* Permanent/pulsed timer A/int. 2 */
+#define ABB5ZES3_REG_TIM_CLK_TBM BIT(6) /* Permanent/pulsed timer B */
+#define ABB5ZES3_REG_TIM_CLK_COF2 BIT(5) /* Clkout Freq bit 2 */
+#define ABB5ZES3_REG_TIM_CLK_COF1 BIT(4) /* Clkout Freq bit 1 */
+#define ABB5ZES3_REG_TIM_CLK_COF0 BIT(3) /* Clkout Freq bit 0 */
+#define ABB5ZES3_REG_TIM_CLK_TAC1 BIT(2) /* Timer A: - 01 : countdown */
+#define ABB5ZES3_REG_TIM_CLK_TAC0 BIT(1) /* - 10 : timer */
+#define ABB5ZES3_REG_TIM_CLK_TBC BIT(0) /* Timer B enable */
+
+/* Timer A Section */
+#define ABB5ZES3_REG_TIMA_CLK 0x10 /* Timer A clock register */
+#define ABB5ZES3_REG_TIMA_CLK_TAQ2 BIT(2) /* Freq bit 2 */
+#define ABB5ZES3_REG_TIMA_CLK_TAQ1 BIT(1) /* Freq bit 1 */
+#define ABB5ZES3_REG_TIMA_CLK_TAQ0 BIT(0) /* Freq bit 0 */
+#define ABB5ZES3_REG_TIMA 0x11 /* Timer A register */
+
+#define ABB5ZES3_TIMA_SEC_LEN 2
+
+/* Timer B Section */
+#define ABB5ZES3_REG_TIMB_CLK 0x12 /* Timer B clock register */
+#define ABB5ZES3_REG_TIMB_CLK_TBW2 BIT(6)
+#define ABB5ZES3_REG_TIMB_CLK_TBW1 BIT(5)
+#define ABB5ZES3_REG_TIMB_CLK_TBW0 BIT(4)
+#define ABB5ZES3_REG_TIMB_CLK_TAQ2 BIT(2)
+#define ABB5ZES3_REG_TIMB_CLK_TAQ1 BIT(1)
+#define ABB5ZES3_REG_TIMB_CLK_TAQ0 BIT(0)
+#define ABB5ZES3_REG_TIMB 0x13 /* Timer B register */
+#define ABB5ZES3_TIMB_SEC_LEN 2
+
+#define ABB5ZES3_MEM_MAP_LEN 0x14
+
+struct abb5zes3_rtc_data {
+ struct rtc_device *rtc;
+ struct regmap *regmap;
+ struct mutex lock;
+
+ int irq;
+
+ bool battery_low;
+ bool timer_alarm; /* current alarm is via timer A */
+};
+
+/*
+ * Try and match register bits w/ fixed null values to see whether we
+ * are dealing with an ABB5ZES3. Note: this function is called early
+ * during init and hence does need mutex protection.
+ */
+static int abb5zes3_i2c_validate_chip(struct regmap *regmap)
+{
+ u8 regs[ABB5ZES3_MEM_MAP_LEN];
+ static const u8 mask[ABB5ZES3_MEM_MAP_LEN] = { 0x00, 0x00, 0x10, 0x00,
+ 0x80, 0xc0, 0xc0, 0xf8,
+ 0xe0, 0x00, 0x00, 0x40,
+ 0x40, 0x78, 0x00, 0x00,
+ 0xf8, 0x00, 0x88, 0x00 };
+ int ret, i;
+
+ ret = regmap_bulk_read(regmap, 0, regs, ABB5ZES3_MEM_MAP_LEN);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < ABB5ZES3_MEM_MAP_LEN; ++i) {
+ if (regs[i] & mask[i]) /* check if bits are cleared */
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+/* Clear alarm status bit. */
+static int _abb5zes3_rtc_clear_alarm(struct device *dev)
+{
+ struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = regmap_update_bits(data->regmap, ABB5ZES3_REG_CTRL2,
+ ABB5ZES3_REG_CTRL2_AF, 0);
+ if (ret)
+ dev_err(dev, "%s: clearing alarm failed (%d)\n", __func__, ret);
+
+ return ret;
+}
+
+/* Enable or disable alarm (i.e. alarm interrupt generation) */
+static int _abb5zes3_rtc_update_alarm(struct device *dev, bool enable)
+{
+ struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = regmap_update_bits(data->regmap, ABB5ZES3_REG_CTRL1,
+ ABB5ZES3_REG_CTRL1_AIE,
+ enable ? ABB5ZES3_REG_CTRL1_AIE : 0);
+ if (ret)
+ dev_err(dev, "%s: writing alarm INT failed (%d)\n",
+ __func__, ret);
+
+ return ret;
+}
+
+/* Enable or disable timer (watchdog timer A interrupt generation) */
+static int _abb5zes3_rtc_update_timer(struct device *dev, bool enable)
+{
+ struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = regmap_update_bits(data->regmap, ABB5ZES3_REG_CTRL2,
+ ABB5ZES3_REG_CTRL2_WTAIE,
+ enable ? ABB5ZES3_REG_CTRL2_WTAIE : 0);
+ if (ret)
+ dev_err(dev, "%s: writing timer INT failed (%d)\n",
+ __func__, ret);
+
+ return ret;
+}
+
+/*
+ * Note: we only read, so regmap inner lock protection is sufficient, i.e.
+ * we do not need driver's main lock protection.
+ */
+static int _abb5zes3_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+ u8 regs[ABB5ZES3_REG_RTC_SC + ABB5ZES3_RTC_SEC_LEN];
+ int ret;
+
+ /*
+ * As we need to read CTRL1 register anyway to access 24/12h
+ * mode bit, we do a single bulk read of both control and RTC
+ * sections (they are consecutive). This also ease indexing
+ * of register values after bulk read.
+ */
+ ret = regmap_bulk_read(data->regmap, ABB5ZES3_REG_CTRL1, regs,
+ sizeof(regs));
+ if (ret) {
+ dev_err(dev, "%s: reading RTC time failed (%d)\n",
+ __func__, ret);
+ goto err;
+ }
+
+ /* If clock integrity is not guaranteed, do not return a time value */
+ if (regs[ABB5ZES3_REG_RTC_SC] & ABB5ZES3_REG_RTC_SC_OSC) {
+ ret = -ENODATA;
+ goto err;
+ }
+
+ tm->tm_sec = bcd2bin(regs[ABB5ZES3_REG_RTC_SC] & 0x7F);
+ tm->tm_min = bcd2bin(regs[ABB5ZES3_REG_RTC_MN]);
+
+ if (regs[ABB5ZES3_REG_CTRL1] & ABB5ZES3_REG_CTRL1_PM) { /* 12hr mode */
+ tm->tm_hour = bcd2bin(regs[ABB5ZES3_REG_RTC_HR] & 0x1f);
+ if (regs[ABB5ZES3_REG_RTC_HR] & ABB5ZES3_REG_RTC_HR_PM) /* PM */
+ tm->tm_hour += 12;
+ } else { /* 24hr mode */
+ tm->tm_hour = bcd2bin(regs[ABB5ZES3_REG_RTC_HR]);
+ }
+
+ tm->tm_mday = bcd2bin(regs[ABB5ZES3_REG_RTC_DT]);
+ tm->tm_wday = bcd2bin(regs[ABB5ZES3_REG_RTC_DW]);
+ tm->tm_mon = bcd2bin(regs[ABB5ZES3_REG_RTC_MO]) - 1; /* starts at 1 */
+ tm->tm_year = bcd2bin(regs[ABB5ZES3_REG_RTC_YR]) + 100;
+
+ ret = rtc_valid_tm(tm);
+
+err:
+ return ret;
+}
+
+static int abb5zes3_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+ u8 regs[ABB5ZES3_REG_RTC_SC + ABB5ZES3_RTC_SEC_LEN];
+ int ret;
+
+ /*
+ * Year register is 8-bit wide and bcd-coded, i.e records values
+ * between 0 and 99. tm_year is an offset from 1900 and we are
+ * interested in the 2000-2099 range, so any value less than 100
+ * is invalid.
+ */
+ if (tm->tm_year < 100)
+ return -EINVAL;
+
+ regs[ABB5ZES3_REG_RTC_SC] = bin2bcd(tm->tm_sec); /* MSB=0 clears OSC */
+ regs[ABB5ZES3_REG_RTC_MN] = bin2bcd(tm->tm_min);
+ regs[ABB5ZES3_REG_RTC_HR] = bin2bcd(tm->tm_hour); /* 24-hour format */
+ regs[ABB5ZES3_REG_RTC_DT] = bin2bcd(tm->tm_mday);
+ regs[ABB5ZES3_REG_RTC_DW] = bin2bcd(tm->tm_wday);
+ regs[ABB5ZES3_REG_RTC_MO] = bin2bcd(tm->tm_mon + 1);
+ regs[ABB5ZES3_REG_RTC_YR] = bin2bcd(tm->tm_year - 100);
+
+ mutex_lock(&data->lock);
+ ret = regmap_bulk_write(data->regmap, ABB5ZES3_REG_RTC_SC,
+ regs + ABB5ZES3_REG_RTC_SC,
+ ABB5ZES3_RTC_SEC_LEN);
+ mutex_unlock(&data->lock);
+
+
+ return ret;
+}
+
+/*
+ * Set provided TAQ and Timer A registers (TIMA_CLK and TIMA) based on
+ * given number of seconds.
+ */
+static inline void sec_to_timer_a(u8 secs, u8 *taq, u8 *timer_a)
+{
+ *taq = ABB5ZES3_REG_TIMA_CLK_TAQ1; /* 1Hz */
+ *timer_a = secs;
+}
+
+/*
+ * Return current number of seconds in Timer A. As we only use
+ * timer A with a 1Hz freq, this is what we expect to have.
+ */
+static inline int sec_from_timer_a(u8 *secs, u8 taq, u8 timer_a)
+{
+ if (taq != ABB5ZES3_REG_TIMA_CLK_TAQ1) /* 1Hz */
+ return -EINVAL;
+
+ *secs = timer_a;
+
+ return 0;
+}
+
+/*
+ * Read alarm currently configured via a watchdog timer using timer A. This
+ * is done by reading current RTC time and adding remaining timer time.
+ */
+static int _abb5zes3_rtc_read_timer(struct device *dev,
+ struct rtc_wkalrm *alarm)
+{
+ struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+ struct rtc_time rtc_tm, *alarm_tm = &alarm->time;
+ u8 regs[ABB5ZES3_TIMA_SEC_LEN + 1];
+ unsigned long rtc_secs;
+ unsigned int reg;
+ u8 timer_secs;
+ int ret;
+
+ /*
+ * Instead of doing two separate calls, because they are consecutive,
+ * we grab both clockout register and Timer A section. The latter is
+ * used to decide if timer A is enabled (as a watchdog timer).
+ */
+ ret = regmap_bulk_read(data->regmap, ABB5ZES3_REG_TIM_CLK, regs,
+ ABB5ZES3_TIMA_SEC_LEN + 1);
+ if (ret) {
+ dev_err(dev, "%s: reading Timer A section failed (%d)\n",
+ __func__, ret);
+ goto err;
+ }
+
+ /* get current time ... */
+ ret = _abb5zes3_rtc_read_time(dev, &rtc_tm);
+ if (ret)
+ goto err;
+
+ /* ... convert to seconds ... */
+ ret = rtc_tm_to_time(&rtc_tm, &rtc_secs);
+ if (ret)
+ goto err;
+
+ /* ... add remaining timer A time ... */
+ ret = sec_from_timer_a(&timer_secs, regs[1], regs[2]);
+ if (ret)
+ goto err;
+
+ /* ... and convert back. */
+ rtc_time_to_tm(rtc_secs + timer_secs, alarm_tm);
+
+ ret = regmap_read(data->regmap, ABB5ZES3_REG_CTRL2, &reg);
+ if (ret) {
+ dev_err(dev, "%s: reading ctrl reg failed (%d)\n",
+ __func__, ret);
+ goto err;
+ }
+
+ alarm->enabled = !!(reg & ABB5ZES3_REG_CTRL2_WTAIE);
+
+err:
+ return ret;
+}
+
+/* Read alarm currently configured via a RTC alarm registers. */
+static int _abb5zes3_rtc_read_alarm(struct device *dev,
+ struct rtc_wkalrm *alarm)
+{
+ struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+ struct rtc_time rtc_tm, *alarm_tm = &alarm->time;
+ unsigned long rtc_secs, alarm_secs;
+ u8 regs[ABB5ZES3_ALRM_SEC_LEN];
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_bulk_read(data->regmap, ABB5ZES3_REG_ALRM_MN, regs,
+ ABB5ZES3_ALRM_SEC_LEN);
+ if (ret) {
+ dev_err(dev, "%s: reading alarm section failed (%d)\n",
+ __func__, ret);
+ goto err;
+ }
+
+ alarm_tm->tm_sec = 0;
+ alarm_tm->tm_min = bcd2bin(regs[0] & 0x7f);
+ alarm_tm->tm_hour = bcd2bin(regs[1] & 0x3f);
+ alarm_tm->tm_mday = bcd2bin(regs[2] & 0x3f);
+ alarm_tm->tm_wday = -1;
+
+ /*
+ * The alarm section does not store year/month. We use the ones in rtc
+ * section as a basis and increment month and then year if needed to get
+ * alarm after current time.
+ */
+ ret = _abb5zes3_rtc_read_time(dev, &rtc_tm);
+ if (ret)
+ goto err;
+
+ alarm_tm->tm_year = rtc_tm.tm_year;
+ alarm_tm->tm_mon = rtc_tm.tm_mon;
+
+ ret = rtc_tm_to_time(&rtc_tm, &rtc_secs);
+ if (ret)
+ goto err;
+
+ ret = rtc_tm_to_time(alarm_tm, &alarm_secs);
+ if (ret)
+ goto err;
+
+ if (alarm_secs < rtc_secs) {
+ if (alarm_tm->tm_mon == 11) {
+ alarm_tm->tm_mon = 0;
+ alarm_tm->tm_year += 1;
+ } else {
+ alarm_tm->tm_mon += 1;
+ }
+ }
+
+ ret = regmap_read(data->regmap, ABB5ZES3_REG_CTRL1, &reg);
+ if (ret) {
+ dev_err(dev, "%s: reading ctrl reg failed (%d)\n",
+ __func__, ret);
+ goto err;
+ }
+
+ alarm->enabled = !!(reg & ABB5ZES3_REG_CTRL1_AIE);
+
+err:
+ return ret;
+}
+
+/*
+ * As the Alarm mechanism supported by the chip is only accurate to the
+ * minute, we use the watchdog timer mechanism provided by timer A
+ * (up to 256 seconds w/ a second accuracy) for low alarm values (below
+ * 4 minutes). Otherwise, we use the common alarm mechanism provided
+ * by the chip. In order for that to work, we keep track of currently
+ * configured timer type via 'timer_alarm' flag in our private data
+ * structure.
+ */
+static int abb5zes3_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ mutex_lock(&data->lock);
+ if (data->timer_alarm)
+ ret = _abb5zes3_rtc_read_timer(dev, alarm);
+ else
+ ret = _abb5zes3_rtc_read_alarm(dev, alarm);
+ mutex_unlock(&data->lock);
+
+ return ret;
+}
+
+/*
+ * Set alarm using chip alarm mechanism. It is only accurate to the
+ * minute (not the second). The function expects alarm interrupt to
+ * be disabled.
+ */
+static int _abb5zes3_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+ struct rtc_time *alarm_tm = &alarm->time;
+ unsigned long rtc_secs, alarm_secs;
+ u8 regs[ABB5ZES3_ALRM_SEC_LEN];
+ struct rtc_time rtc_tm;
+ int ret, enable = 1;
+
+ ret = _abb5zes3_rtc_read_time(dev, &rtc_tm);
+ if (ret)
+ goto err;
+
+ ret = rtc_tm_to_time(&rtc_tm, &rtc_secs);
+ if (ret)
+ goto err;
+
+ ret = rtc_tm_to_time(alarm_tm, &alarm_secs);
+ if (ret)
+ goto err;
+
+ /* If alarm time is before current time, disable the alarm */
+ if (!alarm->enabled || alarm_secs <= rtc_secs) {
+ enable = 0;
+ } else {
+ /*
+ * Chip only support alarms up to one month in the future. Let's
+ * return an error if we get something after that limit.
+ * Comparison is done by incrementing rtc_tm month field by one
+ * and checking alarm value is still below.
+ */
+ if (rtc_tm.tm_mon == 11) { /* handle year wrapping */
+ rtc_tm.tm_mon = 0;
+ rtc_tm.tm_year += 1;
+ } else {
+ rtc_tm.tm_mon += 1;
+ }
+
+ ret = rtc_tm_to_time(&rtc_tm, &rtc_secs);
+ if (ret)
+ goto err;
+
+ if (alarm_secs > rtc_secs) {
+ dev_err(dev, "%s: alarm maximum is one month in the "
+ "future (%d)\n", __func__, ret);
+ ret = -EINVAL;
+ goto err;
+ }
+ }
+
+ /*
+ * Program all alarm registers but DW one. For each register, setting
+ * MSB to 0 enables associated alarm.
+ */
+ regs[0] = bin2bcd(alarm_tm->tm_min) & 0x7f;
+ regs[1] = bin2bcd(alarm_tm->tm_hour) & 0x3f;
+ regs[2] = bin2bcd(alarm_tm->tm_mday) & 0x3f;
+ regs[3] = ABB5ZES3_REG_ALRM_DW_AE; /* do not match day of the week */
+
+ ret = regmap_bulk_write(data->regmap, ABB5ZES3_REG_ALRM_MN, regs,
+ ABB5ZES3_ALRM_SEC_LEN);
+ if (ret < 0) {
+ dev_err(dev, "%s: writing ALARM section failed (%d)\n",
+ __func__, ret);
+ goto err;
+ }
+
+ /* Record currently configured alarm is not a timer */
+ data->timer_alarm = 0;
+
+ /* Enable or disable alarm interrupt generation */
+ ret = _abb5zes3_rtc_update_alarm(dev, enable);
+
+err:
+ return ret;
+}
+
+/*
+ * Set alarm using timer watchdog (via timer A) mechanism. The function expects
+ * timer A interrupt to be disabled.
+ */
+static int _abb5zes3_rtc_set_timer(struct device *dev, struct rtc_wkalrm *alarm,
+ u8 secs)
+{
+ struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+ u8 regs[ABB5ZES3_TIMA_SEC_LEN];
+ u8 mask = ABB5ZES3_REG_TIM_CLK_TAC0 | ABB5ZES3_REG_TIM_CLK_TAC1;
+ int ret = 0;
+
+ /* Program given number of seconds to Timer A registers */
+ sec_to_timer_a(secs, &regs[0], &regs[1]);
+ ret = regmap_bulk_write(data->regmap, ABB5ZES3_REG_TIMA_CLK, regs,
+ ABB5ZES3_TIMA_SEC_LEN);
+ if (ret < 0) {
+ dev_err(dev, "%s: writing timer section failed\n", __func__);
+ goto err;
+ }
+
+ /* Configure Timer A as a watchdog timer */
+ ret = regmap_update_bits(data->regmap, ABB5ZES3_REG_TIM_CLK,
+ mask, ABB5ZES3_REG_TIM_CLK_TAC1);
+ if (ret)
+ dev_err(dev, "%s: failed to update timer\n", __func__);
+
+ /* Record currently configured alarm is a timer */
+ data->timer_alarm = 1;
+
+ /* Enable or disable timer interrupt generation */
+ ret = _abb5zes3_rtc_update_timer(dev, alarm->enabled);
+
+err:
+ return ret;
+}
+
+/*
+ * The chip has an alarm which is only accurate to the minute. In order to
+ * handle alarms below that limit, we use the watchdog timer function of
+ * timer A. More precisely, the timer method is used for alarms below 240
+ * seconds.
+ */
+static int abb5zes3_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+ struct rtc_time *alarm_tm = &alarm->time;
+ unsigned long rtc_secs, alarm_secs;
+ struct rtc_time rtc_tm;
+ int ret;
+
+ mutex_lock(&data->lock);
+ ret = _abb5zes3_rtc_read_time(dev, &rtc_tm);
+ if (ret)
+ goto err;
+
+ ret = rtc_tm_to_time(&rtc_tm, &rtc_secs);
+ if (ret)
+ goto err;
+
+ ret = rtc_tm_to_time(alarm_tm, &alarm_secs);
+ if (ret)
+ goto err;
+
+ /* Let's first disable both the alarm and the timer interrupts */
+ ret = _abb5zes3_rtc_update_alarm(dev, false);
+ if (ret < 0) {
+ dev_err(dev, "%s: unable to disable alarm (%d)\n", __func__,
+ ret);
+ goto err;
+ }
+ ret = _abb5zes3_rtc_update_timer(dev, false);
+ if (ret < 0) {
+ dev_err(dev, "%s: unable to disable timer (%d)\n", __func__,
+ ret);
+ goto err;
+ }
+
+ data->timer_alarm = 0;
+
+ /*
+ * Let's now configure the alarm; if we are expected to ring in
+ * more than 240s, then we setup an alarm. Otherwise, a timer.
+ */
+ if ((alarm_secs > rtc_secs) && ((alarm_secs - rtc_secs) <= 240))
+ ret = _abb5zes3_rtc_set_timer(dev, alarm,
+ alarm_secs - rtc_secs);
+ else
+ ret = _abb5zes3_rtc_set_alarm(dev, alarm);
+
+ err:
+ mutex_unlock(&data->lock);
+
+ if (ret)
+ dev_err(dev, "%s: unable to configure alarm (%d)\n", __func__,
+ ret);
+
+ return ret;
+ }
+
+/* Enable or disable battery low irq generation */
+static inline int _abb5zes3_rtc_battery_low_irq_enable(struct regmap *regmap,
+ bool enable)
+{
+ return regmap_update_bits(regmap, ABB5ZES3_REG_CTRL3,
+ ABB5ZES3_REG_CTRL3_BLIE,
+ enable ? ABB5ZES3_REG_CTRL3_BLIE : 0);
+}
+
+/*
+ * Check current RTC status and enable/disable what needs to be. Return 0 if
+ * everything went ok and a negative value upon error. Note: this function
+ * is called early during init and hence does need mutex protection.
+ */
+static int abb5zes3_rtc_check_setup(struct device *dev)
+{
+ struct abb5zes3_rtc_data *data = dev_get_drvdata(dev);
+ struct regmap *regmap = data->regmap;
+ unsigned int reg;
+ int ret;
+ u8 mask;
+
+ /*
+ * By default, the devices generates a 32.768KHz signal on IRQ#1 pin. It
+ * is disabled here to prevent polluting the interrupt line and
+ * uselessly triggering the IRQ handler we install for alarm and battery
+ * low events. Note: this is done before clearing int. status below
+ * in this function.
+ * We also disable all timers and set timer interrupt to permanent (not
+ * pulsed).
+ */
+ mask = (ABB5ZES3_REG_TIM_CLK_TBC | ABB5ZES3_REG_TIM_CLK_TAC0 |
+ ABB5ZES3_REG_TIM_CLK_TAC1 | ABB5ZES3_REG_TIM_CLK_COF0 |
+ ABB5ZES3_REG_TIM_CLK_COF1 | ABB5ZES3_REG_TIM_CLK_COF2 |
+ ABB5ZES3_REG_TIM_CLK_TBM | ABB5ZES3_REG_TIM_CLK_TAM);
+ ret = regmap_update_bits(regmap, ABB5ZES3_REG_TIM_CLK, mask,
+ ABB5ZES3_REG_TIM_CLK_COF0 | ABB5ZES3_REG_TIM_CLK_COF1 |
+ ABB5ZES3_REG_TIM_CLK_COF2);
+ if (ret < 0) {
+ dev_err(dev, "%s: unable to initialize clkout register (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+
+ /*
+ * Each component of the alarm (MN, HR, DT, DW) can be enabled/disabled
+ * individually by clearing/setting MSB of each associated register. So,
+ * we set all alarm enable bits to disable current alarm setting.
+ */
+ mask = (ABB5ZES3_REG_ALRM_MN_AE | ABB5ZES3_REG_ALRM_HR_AE |
+ ABB5ZES3_REG_ALRM_DT_AE | ABB5ZES3_REG_ALRM_DW_AE);
+ ret = regmap_update_bits(regmap, ABB5ZES3_REG_CTRL2, mask, mask);
+ if (ret < 0) {
+ dev_err(dev, "%s: unable to disable alarm setting (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+
+ /* Set Control 1 register (RTC enabled, 24hr mode, all int. disabled) */
+ mask = (ABB5ZES3_REG_CTRL1_CIE | ABB5ZES3_REG_CTRL1_AIE |
+ ABB5ZES3_REG_CTRL1_SIE | ABB5ZES3_REG_CTRL1_PM |
+ ABB5ZES3_REG_CTRL1_CAP | ABB5ZES3_REG_CTRL1_STOP);
+ ret = regmap_update_bits(regmap, ABB5ZES3_REG_CTRL1, mask, 0);
+ if (ret < 0) {
+ dev_err(dev, "%s: unable to initialize CTRL1 register (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+
+ /*
+ * Set Control 2 register (timer int. disabled, alarm status cleared).
+ * WTAF is read-only and cleared automatically by reading the register.
+ */
+ mask = (ABB5ZES3_REG_CTRL2_CTBIE | ABB5ZES3_REG_CTRL2_CTAIE |
+ ABB5ZES3_REG_CTRL2_WTAIE | ABB5ZES3_REG_CTRL2_AF |
+ ABB5ZES3_REG_CTRL2_SF | ABB5ZES3_REG_CTRL2_CTBF |
+ ABB5ZES3_REG_CTRL2_CTAF);
+ ret = regmap_update_bits(regmap, ABB5ZES3_REG_CTRL2, mask, 0);
+ if (ret < 0) {
+ dev_err(dev, "%s: unable to initialize CTRL2 register (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+
+ /*
+ * Enable battery low detection function and battery switchover function
+ * (standard mode). Disable associated interrupts. Clear battery
+ * switchover flag but not battery low flag. The latter is checked
+ * later below.
+ */
+ mask = (ABB5ZES3_REG_CTRL3_PM0 | ABB5ZES3_REG_CTRL3_PM1 |
+ ABB5ZES3_REG_CTRL3_PM2 | ABB5ZES3_REG_CTRL3_BLIE |
+ ABB5ZES3_REG_CTRL3_BSIE| ABB5ZES3_REG_CTRL3_BSF);
+ ret = regmap_update_bits(regmap, ABB5ZES3_REG_CTRL3, mask, 0);
+ if (ret < 0) {
+ dev_err(dev, "%s: unable to initialize CTRL3 register (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+
+ /* Check oscillator integrity flag */
+ ret = regmap_read(regmap, ABB5ZES3_REG_RTC_SC, &reg);
+ if (ret < 0) {
+ dev_err(dev, "%s: unable to read osc. integrity flag (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+
+ if (reg & ABB5ZES3_REG_RTC_SC_OSC) {
+ dev_err(dev, "clock integrity not guaranteed. Osc. has stopped "
+ "or has been interrupted.\n");
+ dev_err(dev, "change battery (if not already done) and "
+ "then set time to reset osc. failure flag.\n");
+ }
+
+ /*
+ * Check battery low flag at startup: this allows reporting battery
+ * is low at startup when IRQ line is not connected. Note: we record
+ * current status to avoid reenabling this interrupt later in probe
+ * function if battery is low.
+ */
+ ret = regmap_read(regmap, ABB5ZES3_REG_CTRL3, &reg);
+ if (ret < 0) {
+ dev_err(dev, "%s: unable to read battery low flag (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+
+ data->battery_low = reg & ABB5ZES3_REG_CTRL3_BLF;
+ if (data->battery_low) {
+ dev_err(dev, "RTC battery is low; please, consider "
+ "changing it!\n");
+
+ ret = _abb5zes3_rtc_battery_low_irq_enable(regmap, false);
+ if (ret)
+ dev_err(dev, "%s: disabling battery low interrupt "
+ "generation failed (%d)\n", __func__, ret);
+ }
+
+ return ret;
+}
+
+static int abb5zes3_rtc_alarm_irq_enable(struct device *dev,
+ unsigned int enable)
+{
+ struct abb5zes3_rtc_data *rtc_data = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (rtc_data->irq) {
+ mutex_lock(&rtc_data->lock);
+ if (rtc_data->timer_alarm)
+ ret = _abb5zes3_rtc_update_timer(dev, enable);
+ else
+ ret = _abb5zes3_rtc_update_alarm(dev, enable);
+ mutex_unlock(&rtc_data->lock);
+ }
+
+ return ret;
+}
+
+static irqreturn_t _abb5zes3_rtc_interrupt(int irq, void *data)
+{
+ struct i2c_client *client = data;
+ struct device *dev = &client->dev;
+ struct abb5zes3_rtc_data *rtc_data = dev_get_drvdata(dev);
+ struct rtc_device *rtc = rtc_data->rtc;
+ u8 regs[ABB5ZES3_CTRL_SEC_LEN];
+ int ret, handled = IRQ_NONE;
+
+ ret = regmap_bulk_read(rtc_data->regmap, 0, regs,
+ ABB5ZES3_CTRL_SEC_LEN);
+ if (ret) {
+ dev_err(dev, "%s: unable to read control section (%d)!\n",
+ __func__, ret);
+ return handled;
+ }
+
+ /*
+ * Check battery low detection flag and disable battery low interrupt
+ * generation if flag is set (interrupt can only be cleared when
+ * battery is replaced).
+ */
+ if (regs[ABB5ZES3_REG_CTRL3] & ABB5ZES3_REG_CTRL3_BLF) {
+ dev_err(dev, "RTC battery is low; please change it!\n");
+
+ _abb5zes3_rtc_battery_low_irq_enable(rtc_data->regmap, false);
+
+ handled = IRQ_HANDLED;
+ }
+
+ /* Check alarm flag */
+ if (regs[ABB5ZES3_REG_CTRL2] & ABB5ZES3_REG_CTRL2_AF) {
+ dev_dbg(dev, "RTC alarm!\n");
+
+ rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
+
+ /* Acknowledge and disable the alarm */
+ _abb5zes3_rtc_clear_alarm(dev);
+ _abb5zes3_rtc_update_alarm(dev, 0);
+
+ handled = IRQ_HANDLED;
+ }
+
+ /* Check watchdog Timer A flag */
+ if (regs[ABB5ZES3_REG_CTRL2] & ABB5ZES3_REG_CTRL2_WTAF) {
+ dev_dbg(dev, "RTC timer!\n");
+
+ rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
+
+ /*
+ * Acknowledge and disable the alarm. Note: WTAF
+ * flag had been cleared when reading CTRL2
+ */
+ _abb5zes3_rtc_update_timer(dev, 0);
+
+ rtc_data->timer_alarm = 0;
+
+ handled = IRQ_HANDLED;
+ }
+
+ return handled;
+}
+
+static const struct rtc_class_ops rtc_ops = {
+ .read_time = _abb5zes3_rtc_read_time,
+ .set_time = abb5zes3_rtc_set_time,
+ .read_alarm = abb5zes3_rtc_read_alarm,
+ .set_alarm = abb5zes3_rtc_set_alarm,
+ .alarm_irq_enable = abb5zes3_rtc_alarm_irq_enable,
+};
+
+static struct regmap_config abb5zes3_rtc_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int abb5zes3_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct abb5zes3_rtc_data *data = NULL;
+ struct device *dev = &client->dev;
+ struct regmap *regmap;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_I2C_BLOCK)) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ regmap = devm_regmap_init_i2c(client, &abb5zes3_rtc_regmap_config);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ dev_err(dev, "%s: regmap allocation failed: %d\n",
+ __func__, ret);
+ goto err;
+ }
+
+ ret = abb5zes3_i2c_validate_chip(regmap);
+ if (ret)
+ goto err;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ mutex_init(&data->lock);
+ data->regmap = regmap;
+ dev_set_drvdata(dev, data);
+
+ ret = abb5zes3_rtc_check_setup(dev);
+ if (ret)
+ goto err;
+
+ if (client->irq > 0) {
+ ret = devm_request_threaded_irq(dev, client->irq, NULL,
+ _abb5zes3_rtc_interrupt,
+ IRQF_SHARED|IRQF_ONESHOT,
+ DRV_NAME, client);
+ if (!ret) {
+ device_init_wakeup(dev, true);
+ data->irq = client->irq;
+ dev_dbg(dev, "%s: irq %d used by RTC\n", __func__,
+ client->irq);
+ } else {
+ dev_err(dev, "%s: irq %d unavailable (%d)\n",
+ __func__, client->irq, ret);
+ goto err;
+ }
+ }
+
+ data->rtc = devm_rtc_device_register(dev, DRV_NAME, &rtc_ops,
+ THIS_MODULE);
+ ret = PTR_ERR_OR_ZERO(data->rtc);
+ if (ret) {
+ dev_err(dev, "%s: unable to register RTC device (%d)\n",
+ __func__, ret);
+ goto err;
+ }
+
+ /* Enable battery low detection interrupt if battery not already low */
+ if (!data->battery_low && data->irq) {
+ ret = _abb5zes3_rtc_battery_low_irq_enable(regmap, true);
+ if (ret) {
+ dev_err(dev, "%s: enabling battery low interrupt "
+ "generation failed (%d)\n", __func__, ret);
+ goto err;
+ }
+ }
+
+err:
+ if (ret && data && data->irq)
+ device_init_wakeup(dev, false);
+ return ret;
+}
+
+static int abb5zes3_remove(struct i2c_client *client)
+{
+ struct abb5zes3_rtc_data *rtc_data = dev_get_drvdata(&client->dev);
+
+ if (rtc_data->irq > 0)
+ device_init_wakeup(&client->dev, false);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int abb5zes3_rtc_suspend(struct device *dev)
+{
+ struct abb5zes3_rtc_data *rtc_data = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ return enable_irq_wake(rtc_data->irq);
+
+ return 0;
+}
+
+static int abb5zes3_rtc_resume(struct device *dev)
+{
+ struct abb5zes3_rtc_data *rtc_data = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ return disable_irq_wake(rtc_data->irq);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(abb5zes3_rtc_pm_ops, abb5zes3_rtc_suspend,
+ abb5zes3_rtc_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id abb5zes3_dt_match[] = {
+ { .compatible = "abracon,abb5zes3" },
+ { },
+};
+#endif
+
+static const struct i2c_device_id abb5zes3_id[] = {
+ { "abb5zes3", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, abb5zes3_id);
+
+static struct i2c_driver abb5zes3_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .pm = &abb5zes3_rtc_pm_ops,
+ .of_match_table = of_match_ptr(abb5zes3_dt_match),
+ },
+ .probe = abb5zes3_probe,
+ .remove = abb5zes3_remove,
+ .id_table = abb5zes3_id,
+};
+module_i2c_driver(abb5zes3_driver);
+
+MODULE_AUTHOR("Arnaud EBALARD <arno@natisbad.org>");
+MODULE_DESCRIPTION("Abracon AB-RTCMC-32.768kHz-B5ZE-S3 RTC/Alarm driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-armada38x.c b/drivers/rtc/rtc-armada38x.c
new file mode 100644
index 000000000000..43e04af39e09
--- /dev/null
+++ b/drivers/rtc/rtc-armada38x.c
@@ -0,0 +1,320 @@
+/*
+ * RTC driver for the Armada 38x Marvell SoCs
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+#define RTC_STATUS 0x0
+#define RTC_STATUS_ALARM1 BIT(0)
+#define RTC_STATUS_ALARM2 BIT(1)
+#define RTC_IRQ1_CONF 0x4
+#define RTC_IRQ1_AL_EN BIT(0)
+#define RTC_IRQ1_FREQ_EN BIT(1)
+#define RTC_IRQ1_FREQ_1HZ BIT(2)
+#define RTC_TIME 0xC
+#define RTC_ALARM1 0x10
+
+#define SOC_RTC_INTERRUPT 0x8
+#define SOC_RTC_ALARM1 BIT(0)
+#define SOC_RTC_ALARM2 BIT(1)
+#define SOC_RTC_ALARM1_MASK BIT(2)
+#define SOC_RTC_ALARM2_MASK BIT(3)
+
+struct armada38x_rtc {
+ struct rtc_device *rtc_dev;
+ void __iomem *regs;
+ void __iomem *regs_soc;
+ spinlock_t lock;
+ int irq;
+};
+
+/*
+ * According to the datasheet, the OS should wait 5us after every
+ * register write to the RTC hard macro so that the required update
+ * can occur without holding off the system bus
+ */
+static void rtc_delayed_write(u32 val, struct armada38x_rtc *rtc, int offset)
+{
+ writel(val, rtc->regs + offset);
+ udelay(5);
+}
+
+static int armada38x_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
+ unsigned long time, time_check, flags;
+
+ spin_lock_irqsave(&rtc->lock, flags);
+
+ time = readl(rtc->regs + RTC_TIME);
+ /*
+ * WA for failing time set attempts. As stated in HW ERRATA if
+ * more than one second between two time reads is detected
+ * then read once again.
+ */
+ time_check = readl(rtc->regs + RTC_TIME);
+ if ((time_check - time) > 1)
+ time_check = readl(rtc->regs + RTC_TIME);
+
+ spin_unlock_irqrestore(&rtc->lock, flags);
+
+ rtc_time_to_tm(time_check, tm);
+
+ return 0;
+}
+
+static int armada38x_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
+ int ret = 0;
+ unsigned long time, flags;
+
+ ret = rtc_tm_to_time(tm, &time);
+
+ if (ret)
+ goto out;
+ /*
+ * Setting the RTC time not always succeeds. According to the
+ * errata we need to first write on the status register and
+ * then wait for 100ms before writing to the time register to be
+ * sure that the data will be taken into account.
+ */
+ spin_lock_irqsave(&rtc->lock, flags);
+
+ rtc_delayed_write(0, rtc, RTC_STATUS);
+
+ spin_unlock_irqrestore(&rtc->lock, flags);
+
+ msleep(100);
+
+ spin_lock_irqsave(&rtc->lock, flags);
+
+ rtc_delayed_write(time, rtc, RTC_TIME);
+
+ spin_unlock_irqrestore(&rtc->lock, flags);
+out:
+ return ret;
+}
+
+static int armada38x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
+ unsigned long time, flags;
+ u32 val;
+
+ spin_lock_irqsave(&rtc->lock, flags);
+
+ time = readl(rtc->regs + RTC_ALARM1);
+ val = readl(rtc->regs + RTC_IRQ1_CONF) & RTC_IRQ1_AL_EN;
+
+ spin_unlock_irqrestore(&rtc->lock, flags);
+
+ alrm->enabled = val ? 1 : 0;
+ rtc_time_to_tm(time, &alrm->time);
+
+ return 0;
+}
+
+static int armada38x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
+ unsigned long time, flags;
+ int ret = 0;
+ u32 val;
+
+ ret = rtc_tm_to_time(&alrm->time, &time);
+
+ if (ret)
+ goto out;
+
+ spin_lock_irqsave(&rtc->lock, flags);
+
+ rtc_delayed_write(time, rtc, RTC_ALARM1);
+
+ if (alrm->enabled) {
+ rtc_delayed_write(RTC_IRQ1_AL_EN, rtc, RTC_IRQ1_CONF);
+ val = readl(rtc->regs_soc + SOC_RTC_INTERRUPT);
+ writel(val | SOC_RTC_ALARM1_MASK,
+ rtc->regs_soc + SOC_RTC_INTERRUPT);
+ }
+
+ spin_unlock_irqrestore(&rtc->lock, flags);
+
+out:
+ return ret;
+}
+
+static int armada38x_rtc_alarm_irq_enable(struct device *dev,
+ unsigned int enabled)
+{
+ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&rtc->lock, flags);
+
+ if (enabled)
+ rtc_delayed_write(RTC_IRQ1_AL_EN, rtc, RTC_IRQ1_CONF);
+ else
+ rtc_delayed_write(0, rtc, RTC_IRQ1_CONF);
+
+ spin_unlock_irqrestore(&rtc->lock, flags);
+
+ return 0;
+}
+
+static irqreturn_t armada38x_rtc_alarm_irq(int irq, void *data)
+{
+ struct armada38x_rtc *rtc = data;
+ u32 val;
+ int event = RTC_IRQF | RTC_AF;
+
+ dev_dbg(&rtc->rtc_dev->dev, "%s:irq(%d)\n", __func__, irq);
+
+ spin_lock(&rtc->lock);
+
+ val = readl(rtc->regs_soc + SOC_RTC_INTERRUPT);
+
+ writel(val & ~SOC_RTC_ALARM1, rtc->regs_soc + SOC_RTC_INTERRUPT);
+ val = readl(rtc->regs + RTC_IRQ1_CONF);
+ /* disable all the interrupts for alarm 1 */
+ rtc_delayed_write(0, rtc, RTC_IRQ1_CONF);
+ /* Ack the event */
+ rtc_delayed_write(RTC_STATUS_ALARM1, rtc, RTC_STATUS);
+
+ spin_unlock(&rtc->lock);
+
+ if (val & RTC_IRQ1_FREQ_EN) {
+ if (val & RTC_IRQ1_FREQ_1HZ)
+ event |= RTC_UF;
+ else
+ event |= RTC_PF;
+ }
+
+ rtc_update_irq(rtc->rtc_dev, 1, event);
+
+ return IRQ_HANDLED;
+}
+
+static struct rtc_class_ops armada38x_rtc_ops = {
+ .read_time = armada38x_rtc_read_time,
+ .set_time = armada38x_rtc_set_time,
+ .read_alarm = armada38x_rtc_read_alarm,
+ .set_alarm = armada38x_rtc_set_alarm,
+ .alarm_irq_enable = armada38x_rtc_alarm_irq_enable,
+};
+
+static __init int armada38x_rtc_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct armada38x_rtc *rtc;
+ int ret;
+
+ rtc = devm_kzalloc(&pdev->dev, sizeof(struct armada38x_rtc),
+ GFP_KERNEL);
+ if (!rtc)
+ return -ENOMEM;
+
+ spin_lock_init(&rtc->lock);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc");
+ rtc->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(rtc->regs))
+ return PTR_ERR(rtc->regs);
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc-soc");
+ rtc->regs_soc = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(rtc->regs_soc))
+ return PTR_ERR(rtc->regs_soc);
+
+ rtc->irq = platform_get_irq(pdev, 0);
+
+ if (rtc->irq < 0) {
+ dev_err(&pdev->dev, "no irq\n");
+ return rtc->irq;
+ }
+ if (devm_request_irq(&pdev->dev, rtc->irq, armada38x_rtc_alarm_irq,
+ 0, pdev->name, rtc) < 0) {
+ dev_warn(&pdev->dev, "Interrupt not available.\n");
+ rtc->irq = -1;
+ /*
+ * If there is no interrupt available then we can't
+ * use the alarm
+ */
+ armada38x_rtc_ops.set_alarm = NULL;
+ armada38x_rtc_ops.alarm_irq_enable = NULL;
+ }
+ platform_set_drvdata(pdev, rtc);
+ if (rtc->irq != -1)
+ device_init_wakeup(&pdev->dev, 1);
+
+ rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, pdev->name,
+ &armada38x_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc->rtc_dev)) {
+ ret = PTR_ERR(rtc->rtc_dev);
+ dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int armada38x_rtc_suspend(struct device *dev)
+{
+ if (device_may_wakeup(dev)) {
+ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
+
+ return enable_irq_wake(rtc->irq);
+ }
+
+ return 0;
+}
+
+static int armada38x_rtc_resume(struct device *dev)
+{
+ if (device_may_wakeup(dev)) {
+ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
+
+ return disable_irq_wake(rtc->irq);
+ }
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(armada38x_rtc_pm_ops,
+ armada38x_rtc_suspend, armada38x_rtc_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id armada38x_rtc_of_match_table[] = {
+ { .compatible = "marvell,armada-380-rtc", },
+ {}
+};
+#endif
+
+static struct platform_driver armada38x_rtc_driver = {
+ .driver = {
+ .name = "armada38x-rtc",
+ .pm = &armada38x_rtc_pm_ops,
+ .of_match_table = of_match_ptr(armada38x_rtc_of_match_table),
+ },
+};
+
+module_platform_driver_probe(armada38x_rtc_driver, armada38x_rtc_probe);
+
+MODULE_DESCRIPTION("Marvell Armada 38x RTC driver");
+MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index 6b9aaf1afc72..2183fd2750ab 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -313,7 +313,7 @@ static const struct rtc_class_ops at91_rtc_ops = {
.alarm_irq_enable = at91_rtc_alarm_irq_enable,
};
-static struct regmap_config gpbr_regmap_config = {
+static const struct regmap_config gpbr_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index d04939369251..799c34bcb26f 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -304,12 +304,12 @@ static long rtc_dev_ioctl(struct file *file,
* Not supported here.
*/
{
- unsigned long now, then;
+ time64_t now, then;
err = rtc_read_time(rtc, &tm);
if (err < 0)
return err;
- rtc_tm_to_time(&tm, &now);
+ now = rtc_tm_to_time64(&tm);
alarm.time.tm_mday = tm.tm_mday;
alarm.time.tm_mon = tm.tm_mon;
@@ -317,11 +317,11 @@ static long rtc_dev_ioctl(struct file *file,
err = rtc_valid_tm(&alarm.time);
if (err < 0)
return err;
- rtc_tm_to_time(&alarm.time, &then);
+ then = rtc_tm_to_time64(&alarm.time);
/* alarm may need to wrap into tomorrow */
if (then < now) {
- rtc_time_to_tm(now + 24 * 60 * 60, &tm);
+ rtc_time64_to_tm(now + 24 * 60 * 60, &tm);
alarm.time.tm_mday = tm.tm_mday;
alarm.time.tm_mon = tm.tm_mon;
alarm.time.tm_year = tm.tm_year;
diff --git a/drivers/rtc/rtc-efi.c b/drivers/rtc/rtc-efi.c
index b37b0c80bd5a..cb989cd00b14 100644
--- a/drivers/rtc/rtc-efi.c
+++ b/drivers/rtc/rtc-efi.c
@@ -218,6 +218,7 @@ static int __init efi_rtc_probe(struct platform_device *dev)
if (IS_ERR(rtc))
return PTR_ERR(rtc);
+ rtc->uie_unsupported = 1;
platform_set_drvdata(dev, rtc);
return 0;
diff --git a/drivers/rtc/rtc-imxdi.c b/drivers/rtc/rtc-imxdi.c
index 42f5570f42f8..c666eab98273 100644
--- a/drivers/rtc/rtc-imxdi.c
+++ b/drivers/rtc/rtc-imxdi.c
@@ -50,22 +50,58 @@
#define DCAMR_UNSET 0xFFFFFFFF /* doomsday - 1 sec */
#define DCR 0x10 /* Control Reg */
+#define DCR_TDCHL (1 << 30) /* Tamper-detect configuration hard lock */
+#define DCR_TDCSL (1 << 29) /* Tamper-detect configuration soft lock */
+#define DCR_KSSL (1 << 27) /* Key-select soft lock */
+#define DCR_MCHL (1 << 20) /* Monotonic-counter hard lock */
+#define DCR_MCSL (1 << 19) /* Monotonic-counter soft lock */
+#define DCR_TCHL (1 << 18) /* Timer-counter hard lock */
+#define DCR_TCSL (1 << 17) /* Timer-counter soft lock */
+#define DCR_FSHL (1 << 16) /* Failure state hard lock */
#define DCR_TCE (1 << 3) /* Time Counter Enable */
+#define DCR_MCE (1 << 2) /* Monotonic Counter Enable */
#define DSR 0x14 /* Status Reg */
-#define DSR_WBF (1 << 10) /* Write Busy Flag */
-#define DSR_WNF (1 << 9) /* Write Next Flag */
-#define DSR_WCF (1 << 8) /* Write Complete Flag */
+#define DSR_WTD (1 << 23) /* Wire-mesh tamper detected */
+#define DSR_ETBD (1 << 22) /* External tamper B detected */
+#define DSR_ETAD (1 << 21) /* External tamper A detected */
+#define DSR_EBD (1 << 20) /* External boot detected */
+#define DSR_SAD (1 << 19) /* SCC alarm detected */
+#define DSR_TTD (1 << 18) /* Temperatur tamper detected */
+#define DSR_CTD (1 << 17) /* Clock tamper detected */
+#define DSR_VTD (1 << 16) /* Voltage tamper detected */
+#define DSR_WBF (1 << 10) /* Write Busy Flag (synchronous) */
+#define DSR_WNF (1 << 9) /* Write Next Flag (synchronous) */
+#define DSR_WCF (1 << 8) /* Write Complete Flag (synchronous)*/
#define DSR_WEF (1 << 7) /* Write Error Flag */
#define DSR_CAF (1 << 4) /* Clock Alarm Flag */
+#define DSR_MCO (1 << 3) /* monotonic counter overflow */
+#define DSR_TCO (1 << 2) /* time counter overflow */
#define DSR_NVF (1 << 1) /* Non-Valid Flag */
#define DSR_SVF (1 << 0) /* Security Violation Flag */
-#define DIER 0x18 /* Interrupt Enable Reg */
+#define DIER 0x18 /* Interrupt Enable Reg (synchronous) */
#define DIER_WNIE (1 << 9) /* Write Next Interrupt Enable */
#define DIER_WCIE (1 << 8) /* Write Complete Interrupt Enable */
#define DIER_WEIE (1 << 7) /* Write Error Interrupt Enable */
#define DIER_CAIE (1 << 4) /* Clock Alarm Interrupt Enable */
+#define DIER_SVIE (1 << 0) /* Security-violation Interrupt Enable */
+
+#define DMCR 0x1c /* DryIce Monotonic Counter Reg */
+
+#define DTCR 0x28 /* DryIce Tamper Configuration Reg */
+#define DTCR_MOE (1 << 9) /* monotonic overflow enabled */
+#define DTCR_TOE (1 << 8) /* time overflow enabled */
+#define DTCR_WTE (1 << 7) /* wire-mesh tamper enabled */
+#define DTCR_ETBE (1 << 6) /* external B tamper enabled */
+#define DTCR_ETAE (1 << 5) /* external A tamper enabled */
+#define DTCR_EBE (1 << 4) /* external boot tamper enabled */
+#define DTCR_SAIE (1 << 3) /* SCC enabled */
+#define DTCR_TTE (1 << 2) /* temperature tamper enabled */
+#define DTCR_CTE (1 << 1) /* clock tamper enabled */
+#define DTCR_VTE (1 << 0) /* voltage tamper enabled */
+
+#define DGPR 0x3c /* DryIce General Purpose Reg */
/**
* struct imxdi_dev - private imxdi rtc data
@@ -313,7 +349,7 @@ static irqreturn_t dryice_norm_irq(int irq, void *dev_id)
dier = __raw_readl(imxdi->ioaddr + DIER);
/* handle write complete and write error cases */
- if ((dier & DIER_WCIE)) {
+ if (dier & DIER_WCIE) {
/*If the write wait queue is empty then there is no pending
operations. It means the interrupt is for DryIce -Security.
IRQ must be returned as none.*/
@@ -322,7 +358,7 @@ static irqreturn_t dryice_norm_irq(int irq, void *dev_id)
/* DSR_WCF clears itself on DSR read */
dsr = __raw_readl(imxdi->ioaddr + DSR);
- if ((dsr & (DSR_WCF | DSR_WEF))) {
+ if (dsr & (DSR_WCF | DSR_WEF)) {
/* mask the interrupt */
di_int_disable(imxdi, DIER_WCIE);
@@ -335,7 +371,7 @@ static irqreturn_t dryice_norm_irq(int irq, void *dev_id)
}
/* handle the alarm case */
- if ((dier & DIER_CAIE)) {
+ if (dier & DIER_CAIE) {
/* DSR_WCF clears itself on DSR read */
dsr = __raw_readl(imxdi->ioaddr + DSR);
if (dsr & DSR_CAF) {
diff --git a/drivers/rtc/rtc-isl12057.c b/drivers/rtc/rtc-isl12057.c
index 6e1fcfb5d7e6..b8f862953f7f 100644
--- a/drivers/rtc/rtc-isl12057.c
+++ b/drivers/rtc/rtc-isl12057.c
@@ -79,8 +79,10 @@
#define ISL12057_MEM_MAP_LEN 0x10
struct isl12057_rtc_data {
+ struct rtc_device *rtc;
struct regmap *regmap;
struct mutex lock;
+ int irq;
};
static void isl12057_rtc_regs_to_tm(struct rtc_time *tm, u8 *regs)
@@ -160,14 +162,47 @@ static int isl12057_i2c_validate_chip(struct regmap *regmap)
return 0;
}
-static int isl12057_rtc_read_time(struct device *dev, struct rtc_time *tm)
+static int _isl12057_rtc_clear_alarm(struct device *dev)
+{
+ struct isl12057_rtc_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = regmap_update_bits(data->regmap, ISL12057_REG_SR,
+ ISL12057_REG_SR_A1F, 0);
+ if (ret)
+ dev_err(dev, "%s: clearing alarm failed (%d)\n", __func__, ret);
+
+ return ret;
+}
+
+static int _isl12057_rtc_update_alarm(struct device *dev, int enable)
+{
+ struct isl12057_rtc_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = regmap_update_bits(data->regmap, ISL12057_REG_INT,
+ ISL12057_REG_INT_A1IE,
+ enable ? ISL12057_REG_INT_A1IE : 0);
+ if (ret)
+ dev_err(dev, "%s: changing alarm interrupt flag failed (%d)\n",
+ __func__, ret);
+
+ return ret;
+}
+
+/*
+ * Note: as we only read from device and do not perform any update, there is
+ * no need for an equivalent function which would try and get driver's main
+ * lock. Here, it is safe for everyone if we just use regmap internal lock
+ * on the device when reading.
+ */
+static int _isl12057_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
struct isl12057_rtc_data *data = dev_get_drvdata(dev);
u8 regs[ISL12057_RTC_SEC_LEN];
unsigned int sr;
int ret;
- mutex_lock(&data->lock);
ret = regmap_read(data->regmap, ISL12057_REG_SR, &sr);
if (ret) {
dev_err(dev, "%s: unable to read oscillator status flag (%d)\n",
@@ -187,8 +222,6 @@ static int isl12057_rtc_read_time(struct device *dev, struct rtc_time *tm)
__func__, ret);
out:
- mutex_unlock(&data->lock);
-
if (ret)
return ret;
@@ -197,6 +230,168 @@ out:
return rtc_valid_tm(tm);
}
+static int isl12057_rtc_update_alarm(struct device *dev, int enable)
+{
+ struct isl12057_rtc_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ mutex_lock(&data->lock);
+ ret = _isl12057_rtc_update_alarm(dev, enable);
+ mutex_unlock(&data->lock);
+
+ return ret;
+}
+
+static int isl12057_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ struct isl12057_rtc_data *data = dev_get_drvdata(dev);
+ struct rtc_time rtc_tm, *alarm_tm = &alarm->time;
+ unsigned long rtc_secs, alarm_secs;
+ u8 regs[ISL12057_A1_SEC_LEN];
+ unsigned int ir;
+ int ret;
+
+ mutex_lock(&data->lock);
+ ret = regmap_bulk_read(data->regmap, ISL12057_REG_A1_SC, regs,
+ ISL12057_A1_SEC_LEN);
+ if (ret) {
+ dev_err(dev, "%s: reading alarm section failed (%d)\n",
+ __func__, ret);
+ goto err_unlock;
+ }
+
+ alarm_tm->tm_sec = bcd2bin(regs[0] & 0x7f);
+ alarm_tm->tm_min = bcd2bin(regs[1] & 0x7f);
+ alarm_tm->tm_hour = bcd2bin(regs[2] & 0x3f);
+ alarm_tm->tm_mday = bcd2bin(regs[3] & 0x3f);
+ alarm_tm->tm_wday = -1;
+
+ /*
+ * The alarm section does not store year/month. We use the ones in rtc
+ * section as a basis and increment month and then year if needed to get
+ * alarm after current time.
+ */
+ ret = _isl12057_rtc_read_time(dev, &rtc_tm);
+ if (ret)
+ goto err_unlock;
+
+ alarm_tm->tm_year = rtc_tm.tm_year;
+ alarm_tm->tm_mon = rtc_tm.tm_mon;
+
+ ret = rtc_tm_to_time(&rtc_tm, &rtc_secs);
+ if (ret)
+ goto err_unlock;
+
+ ret = rtc_tm_to_time(alarm_tm, &alarm_secs);
+ if (ret)
+ goto err_unlock;
+
+ if (alarm_secs < rtc_secs) {
+ if (alarm_tm->tm_mon == 11) {
+ alarm_tm->tm_mon = 0;
+ alarm_tm->tm_year += 1;
+ } else {
+ alarm_tm->tm_mon += 1;
+ }
+ }
+
+ ret = regmap_read(data->regmap, ISL12057_REG_INT, &ir);
+ if (ret) {
+ dev_err(dev, "%s: reading alarm interrupt flag failed (%d)\n",
+ __func__, ret);
+ goto err_unlock;
+ }
+
+ alarm->enabled = !!(ir & ISL12057_REG_INT_A1IE);
+
+err_unlock:
+ mutex_unlock(&data->lock);
+
+ return ret;
+}
+
+static int isl12057_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+ struct isl12057_rtc_data *data = dev_get_drvdata(dev);
+ struct rtc_time *alarm_tm = &alarm->time;
+ unsigned long rtc_secs, alarm_secs;
+ u8 regs[ISL12057_A1_SEC_LEN];
+ struct rtc_time rtc_tm;
+ int ret, enable = 1;
+
+ mutex_lock(&data->lock);
+ ret = _isl12057_rtc_read_time(dev, &rtc_tm);
+ if (ret)
+ goto err_unlock;
+
+ ret = rtc_tm_to_time(&rtc_tm, &rtc_secs);
+ if (ret)
+ goto err_unlock;
+
+ ret = rtc_tm_to_time(alarm_tm, &alarm_secs);
+ if (ret)
+ goto err_unlock;
+
+ /* If alarm time is before current time, disable the alarm */
+ if (!alarm->enabled || alarm_secs <= rtc_secs) {
+ enable = 0;
+ } else {
+ /*
+ * Chip only support alarms up to one month in the future. Let's
+ * return an error if we get something after that limit.
+ * Comparison is done by incrementing rtc_tm month field by one
+ * and checking alarm value is still below.
+ */
+ if (rtc_tm.tm_mon == 11) { /* handle year wrapping */
+ rtc_tm.tm_mon = 0;
+ rtc_tm.tm_year += 1;
+ } else {
+ rtc_tm.tm_mon += 1;
+ }
+
+ ret = rtc_tm_to_time(&rtc_tm, &rtc_secs);
+ if (ret)
+ goto err_unlock;
+
+ if (alarm_secs > rtc_secs) {
+ dev_err(dev, "%s: max for alarm is one month (%d)\n",
+ __func__, ret);
+ ret = -EINVAL;
+ goto err_unlock;
+ }
+ }
+
+ /* Disable the alarm before modifying it */
+ ret = _isl12057_rtc_update_alarm(dev, 0);
+ if (ret < 0) {
+ dev_err(dev, "%s: unable to disable the alarm (%d)\n",
+ __func__, ret);
+ goto err_unlock;
+ }
+
+ /* Program alarm registers */
+ regs[0] = bin2bcd(alarm_tm->tm_sec) & 0x7f;
+ regs[1] = bin2bcd(alarm_tm->tm_min) & 0x7f;
+ regs[2] = bin2bcd(alarm_tm->tm_hour) & 0x3f;
+ regs[3] = bin2bcd(alarm_tm->tm_mday) & 0x3f;
+
+ ret = regmap_bulk_write(data->regmap, ISL12057_REG_A1_SC, regs,
+ ISL12057_A1_SEC_LEN);
+ if (ret < 0) {
+ dev_err(dev, "%s: writing alarm section failed (%d)\n",
+ __func__, ret);
+ goto err_unlock;
+ }
+
+ /* Enable or disable alarm */
+ ret = _isl12057_rtc_update_alarm(dev, enable);
+
+err_unlock:
+ mutex_unlock(&data->lock);
+
+ return ret;
+}
+
static int isl12057_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
struct isl12057_rtc_data *data = dev_get_drvdata(dev);
@@ -262,12 +457,85 @@ static int isl12057_check_rtc_status(struct device *dev, struct regmap *regmap)
return 0;
}
+#ifdef CONFIG_OF
+/*
+ * One would expect the device to be marked as a wakeup source only
+ * when an IRQ pin of the RTC is routed to an interrupt line of the
+ * CPU. In practice, such an IRQ pin can be connected to a PMIC and
+ * this allows the device to be powered up when RTC alarm rings. This
+ * is for instance the case on ReadyNAS 102, 104 and 2120. On those
+ * devices with no IRQ driectly connected to the SoC, the RTC chip
+ * can be forced as a wakeup source by stating that explicitly in
+ * the device's .dts file using the "isil,irq2-can-wakeup-machine"
+ * boolean property. This will guarantee 'wakealarm' sysfs entry is
+ * available on the device.
+ *
+ * The function below returns 1, i.e. the capability of the chip to
+ * wakeup the device, based on IRQ availability or if the boolean
+ * property has been set in the .dts file. Otherwise, it returns 0.
+ */
+
+static bool isl12057_can_wakeup_machine(struct device *dev)
+{
+ struct isl12057_rtc_data *data = dev_get_drvdata(dev);
+
+ return (data->irq || of_property_read_bool(dev->of_node,
+ "isil,irq2-can-wakeup-machine"));
+}
+#else
+static bool isl12057_can_wakeup_machine(struct device *dev)
+{
+ struct isl12057_rtc_data *data = dev_get_drvdata(dev);
+
+ return !!data->irq;
+}
+#endif
+
+static int isl12057_rtc_alarm_irq_enable(struct device *dev,
+ unsigned int enable)
+{
+ struct isl12057_rtc_data *rtc_data = dev_get_drvdata(dev);
+ int ret = -ENOTTY;
+
+ if (rtc_data->irq)
+ ret = isl12057_rtc_update_alarm(dev, enable);
+
+ return ret;
+}
+
+static irqreturn_t isl12057_rtc_interrupt(int irq, void *data)
+{
+ struct i2c_client *client = data;
+ struct isl12057_rtc_data *rtc_data = dev_get_drvdata(&client->dev);
+ struct rtc_device *rtc = rtc_data->rtc;
+ int ret, handled = IRQ_NONE;
+ unsigned int sr;
+
+ ret = regmap_read(rtc_data->regmap, ISL12057_REG_SR, &sr);
+ if (!ret && (sr & ISL12057_REG_SR_A1F)) {
+ dev_dbg(&client->dev, "RTC alarm!\n");
+
+ rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
+
+ /* Acknowledge and disable the alarm */
+ _isl12057_rtc_clear_alarm(&client->dev);
+ _isl12057_rtc_update_alarm(&client->dev, 0);
+
+ handled = IRQ_HANDLED;
+ }
+
+ return handled;
+}
+
static const struct rtc_class_ops rtc_ops = {
- .read_time = isl12057_rtc_read_time,
+ .read_time = _isl12057_rtc_read_time,
.set_time = isl12057_rtc_set_time,
+ .read_alarm = isl12057_rtc_read_alarm,
+ .set_alarm = isl12057_rtc_set_alarm,
+ .alarm_irq_enable = isl12057_rtc_alarm_irq_enable,
};
-static struct regmap_config isl12057_rtc_regmap_config = {
+static const struct regmap_config isl12057_rtc_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
@@ -277,7 +545,6 @@ static int isl12057_probe(struct i2c_client *client,
{
struct device *dev = &client->dev;
struct isl12057_rtc_data *data;
- struct rtc_device *rtc;
struct regmap *regmap;
int ret;
@@ -310,9 +577,70 @@ static int isl12057_probe(struct i2c_client *client,
data->regmap = regmap;
dev_set_drvdata(dev, data);
- rtc = devm_rtc_device_register(dev, DRV_NAME, &rtc_ops, THIS_MODULE);
- return PTR_ERR_OR_ZERO(rtc);
+ if (client->irq > 0) {
+ ret = devm_request_threaded_irq(dev, client->irq, NULL,
+ isl12057_rtc_interrupt,
+ IRQF_SHARED|IRQF_ONESHOT,
+ DRV_NAME, client);
+ if (!ret)
+ data->irq = client->irq;
+ else
+ dev_err(dev, "%s: irq %d unavailable (%d)\n", __func__,
+ client->irq, ret);
+ }
+
+ if (isl12057_can_wakeup_machine(dev))
+ device_init_wakeup(dev, true);
+
+ data->rtc = devm_rtc_device_register(dev, DRV_NAME, &rtc_ops,
+ THIS_MODULE);
+ ret = PTR_ERR_OR_ZERO(data->rtc);
+ if (ret) {
+ dev_err(dev, "%s: unable to register RTC device (%d)\n",
+ __func__, ret);
+ goto err;
+ }
+
+ /* We cannot support UIE mode if we do not have an IRQ line */
+ if (!data->irq)
+ data->rtc->uie_unsupported = 1;
+
+err:
+ return ret;
+}
+
+static int isl12057_remove(struct i2c_client *client)
+{
+ if (isl12057_can_wakeup_machine(&client->dev))
+ device_init_wakeup(&client->dev, false);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int isl12057_rtc_suspend(struct device *dev)
+{
+ struct isl12057_rtc_data *rtc_data = dev_get_drvdata(dev);
+
+ if (rtc_data->irq && device_may_wakeup(dev))
+ return enable_irq_wake(rtc_data->irq);
+
+ return 0;
+}
+
+static int isl12057_rtc_resume(struct device *dev)
+{
+ struct isl12057_rtc_data *rtc_data = dev_get_drvdata(dev);
+
+ if (rtc_data->irq && device_may_wakeup(dev))
+ return disable_irq_wake(rtc_data->irq);
+
+ return 0;
}
+#endif
+
+static SIMPLE_DEV_PM_OPS(isl12057_rtc_pm_ops, isl12057_rtc_suspend,
+ isl12057_rtc_resume);
#ifdef CONFIG_OF
static const struct of_device_id isl12057_dt_match[] = {
@@ -331,9 +659,11 @@ static struct i2c_driver isl12057_driver = {
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
+ .pm = &isl12057_rtc_pm_ops,
.of_match_table = of_match_ptr(isl12057_dt_match),
},
.probe = isl12057_probe,
+ .remove = isl12057_remove,
.id_table = isl12057_id,
};
module_i2c_driver(isl12057_driver);
diff --git a/drivers/rtc/rtc-pcf2123.c b/drivers/rtc/rtc-pcf2123.c
index d1953bb244c5..8a7556cbcb7f 100644
--- a/drivers/rtc/rtc-pcf2123.c
+++ b/drivers/rtc/rtc-pcf2123.c
@@ -38,6 +38,7 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/of.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/rtc.h>
@@ -340,10 +341,19 @@ static int pcf2123_remove(struct spi_device *spi)
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id pcf2123_dt_ids[] = {
+ { .compatible = "nxp,rtc-pcf2123", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pcf2123_dt_ids);
+#endif
+
static struct spi_driver pcf2123_driver = {
.driver = {
.name = "rtc-pcf2123",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(pcf2123_dt_ids),
},
.probe = pcf2123_probe,
.remove = pcf2123_remove,
diff --git a/drivers/rtc/rtc-rk808.c b/drivers/rtc/rtc-rk808.c
index df42257668ac..91ca0bc1b484 100644
--- a/drivers/rtc/rtc-rk808.c
+++ b/drivers/rtc/rtc-rk808.c
@@ -67,15 +67,21 @@ static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
/* Force an update of the shadowed registers right now */
ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
BIT_RTC_CTRL_REG_RTC_GET_TIME,
- 0);
+ BIT_RTC_CTRL_REG_RTC_GET_TIME);
if (ret) {
dev_err(dev, "Failed to update bits rtc_ctrl: %d\n", ret);
return ret;
}
+ /*
+ * After we set the GET_TIME bit, the rtc time can't be read
+ * immediately. So we should wait up to 31.25 us, about one cycle of
+ * 32khz. If we clear the GET_TIME bit here, the time of i2c transfer
+ * certainly more than 31.25us: 16 * 2.5us at 400kHz bus frequency.
+ */
ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
BIT_RTC_CTRL_REG_RTC_GET_TIME,
- BIT_RTC_CTRL_REG_RTC_GET_TIME);
+ 0);
if (ret) {
dev_err(dev, "Failed to update bits rtc_ctrl: %d\n", ret);
return ret;
diff --git a/drivers/rtc/systohc.c b/drivers/rtc/systohc.c
index bf3e242ccc5c..eb71872d0361 100644
--- a/drivers/rtc/systohc.c
+++ b/drivers/rtc/systohc.c
@@ -20,16 +20,16 @@
*
* If temporary failure is indicated the caller should try again 'soon'
*/
-int rtc_set_ntp_time(struct timespec now)
+int rtc_set_ntp_time(struct timespec64 now)
{
struct rtc_device *rtc;
struct rtc_time tm;
int err = -ENODEV;
if (now.tv_nsec < (NSEC_PER_SEC >> 1))
- rtc_time_to_tm(now.tv_sec, &tm);
+ rtc_time64_to_tm(now.tv_sec, &tm);
else
- rtc_time_to_tm(now.tv_sec + 1, &tm);
+ rtc_time64_to_tm(now.tv_sec + 1, &tm);
rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE);
if (rtc) {
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.