diff options
Diffstat (limited to 'drivers/scsi/fnic/vnic_devcmd.h')
| -rw-r--r-- | drivers/scsi/fnic/vnic_devcmd.h | 160 |
1 files changed, 158 insertions, 2 deletions
diff --git a/drivers/scsi/fnic/vnic_devcmd.h b/drivers/scsi/fnic/vnic_devcmd.h index 3e2fcbda6aed..c5dde556dc7c 100644 --- a/drivers/scsi/fnic/vnic_devcmd.h +++ b/drivers/scsi/fnic/vnic_devcmd.h @@ -170,7 +170,8 @@ enum vnic_devcmd_cmd { /* variant of CMD_INIT, with provisioning info * (u64)a0=paddr of vnic_devcmd_provinfo - * (u32)a1=sizeof provision info */ + * (u32)a1=sizeof provision info + */ CMD_INIT_PROV_INFO = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 27), /* enable virtual link */ @@ -262,12 +263,132 @@ enum vnic_devcmd_cmd { * non-zero for resetting vlan to the default * out: (u16)a0=old default vlan */ - CMD_SET_DEFAULT_VLAN = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 46) + CMD_SET_DEFAULT_VLAN = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 46), + + /* init_prov_info2: + * Variant of CMD_INIT_PROV_INFO, where it will not try to enable + * the vnic until CMD_ENABLE2 is issued. + * (u64)a0=paddr of vnic_devcmd_provinfo + * (u32)a1=sizeof provision info + */ + CMD_INIT_PROV_INFO2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 47), + + /* enable2: + * (u32)a0=0 ==> standby + * =CMD_ENABLE2_ACTIVE ==> active + */ + CMD_ENABLE2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 48), + + /* + * cmd_status: + * Returns the status of the specified command + * Input: + * a0 = command for which status is being queried. + * Possible values are: + * CMD_SOFT_RESET + * CMD_HANG_RESET + * CMD_OPEN + * CMD_INIT + * CMD_INIT_PROV_INFO + * CMD_DEINIT + * CMD_INIT_PROV_INFO2 + * CMD_ENABLE2 + * Output: + * if status == STAT_ERROR + * a0 = ERR_ENOTSUPPORTED - status for command in a0 is + * not supported + * if status == STAT_NONE + * a0 = status of the devcmd specified in a0 as follows. + * ERR_SUCCESS - command in a0 completed successfully + * ERR_EINPROGRESS - command in a0 is still in progress + */ + CMD_STATUS = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 49), + + /* + * Returns interrupt coalescing timer conversion factors. + * After calling this devcmd, ENIC driver can convert + * interrupt coalescing timer in usec into CPU cycles as follows: + * + * intr_timer_cycles = intr_timer_usec * multiplier / divisor + * + * Interrupt coalescing timer in usecs can be be converted/obtained + * from CPU cycles as follows: + * + * intr_timer_usec = intr_timer_cycles * divisor / multiplier + * + * in: none + * out: (u32)a0 = multiplier + * (u32)a1 = divisor + * (u32)a2 = maximum timer value in usec + */ + CMD_INTR_COAL_CONVERT = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 50), + + /* + * ISCSI DUMP API: + * in: (u64)a0=paddr of the param or param itself + * (u32)a1=ISCSI_CMD_xxx + */ + CMD_ISCSI_DUMP_REQ = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 51), + + /* + * ISCSI DUMP STATUS API: + * in: (u32)a0=cmd tag + * in: (u32)a1=ISCSI_CMD_xxx + * out: (u32)a0=cmd status + */ + CMD_ISCSI_DUMP_STATUS = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 52), + + /* + * Subvnic migration from MQ <--> VF. + * Enable the LIF migration from MQ to VF and vice versa. MQ and VF + * indexes are statically bound at the time of initialization. + * Based on the + * direction of migration, the resources of either MQ or the VF shall + * be attached to the LIF. + * in: (u32)a0=Direction of Migration + * 0=> Migrate to VF + * 1=> Migrate to MQ + * (u32)a1=VF index (MQ index) + */ + CMD_MIGRATE_SUBVNIC = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 53), + + /* + * Register / Deregister the notification block for MQ subvnics + * in: + * (u64)a0=paddr to notify (set paddr=0 to unset) + * (u32)a1 & 0x00000000ffffffff=sizeof(struct vnic_devcmd_notify) + * (u16)a1 & 0x0000ffff00000000=intr num (-1 for no intr) + * out: + * (u32)a1 = effective size + */ + CMD_SUBVNIC_NOTIFY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 54), + + /* + * Set the predefined mac address as default + * in: + * (u48)a0=mac addr + */ + CMD_SET_MAC_ADDR = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 55), + + /* Update the provisioning info of the given VIF + * (u64)a0=paddr of vnic_devcmd_provinfo + * (u32)a1=sizeof provision info + */ + CMD_PROV_INFO_UPDATE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 56), + + /* + * Initialization for the devcmd2 interface. + * in: (u64) a0=host result buffer physical address + * in: (u16) a1=number of entries in result buffer + */ + CMD_INITIALIZE_DEVCMD2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 57) }; /* flags for CMD_OPEN */ #define CMD_OPENF_OPROM 0x1 /* open coming from option rom */ +#define CMD_OPENF_RQ_ENABLE_THEN_POST 0x2 + /* flags for CMD_INIT */ #define CMD_INITF_DEFAULT_MAC 0x1 /* init with default mac addr */ @@ -345,4 +466,39 @@ struct vnic_devcmd { u64 args[VNIC_DEVCMD_NARGS]; /* RW cmd args (little-endian) */ }; +/* + * Version 2 of the interface. + * + * Some things are carried over, notably the vnic_devcmd_cmd enum. + */ + +/* + * Flags for vnic_devcmd2.flags + */ + +#define DEVCMD2_FNORESULT 0x1 /* Don't copy result to host */ + +#define VNIC_DEVCMD2_NARGS VNIC_DEVCMD_NARGS + +struct vnic_devcmd2 { + u16 pad; + u16 flags; + u32 cmd; /* same command #defines as original */ + u64 args[VNIC_DEVCMD2_NARGS]; +}; + +#define VNIC_DEVCMD2_NRESULTS VNIC_DEVCMD_NARGS +struct devcmd2_result { + u64 results[VNIC_DEVCMD2_NRESULTS]; + u32 pad; + u16 completed_index; /* into copy WQ */ + u8 error; /* same error codes as original */ + u8 color; /* 0 or 1 as with completion queues */ +}; + +#define DEVCMD2_RING_SIZE 32 +#define DEVCMD2_DESC_SIZE 128 + +#define DEVCMD2_RESULTS_SIZE_MAX ((1 << 16) - 1) + #endif /* _VNIC_DEVCMD_H_ */ |