diff options
Diffstat (limited to 'drivers/scsi/hisi_sas/hisi_sas_v2_hw.c')
| -rw-r--r-- | drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 2214 |
1 files changed, 2214 insertions, 0 deletions
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c new file mode 100644 index 000000000000..b7337476454b --- /dev/null +++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c @@ -0,0 +1,2214 @@ +/* + * Copyright (c) 2016 Linaro Ltd. + * Copyright (c) 2016 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include "hisi_sas.h" +#define DRV_NAME "hisi_sas_v2_hw" + +/* global registers need init*/ +#define DLVRY_QUEUE_ENABLE 0x0 +#define IOST_BASE_ADDR_LO 0x8 +#define IOST_BASE_ADDR_HI 0xc +#define ITCT_BASE_ADDR_LO 0x10 +#define ITCT_BASE_ADDR_HI 0x14 +#define IO_BROKEN_MSG_ADDR_LO 0x18 +#define IO_BROKEN_MSG_ADDR_HI 0x1c +#define PHY_CONTEXT 0x20 +#define PHY_STATE 0x24 +#define PHY_PORT_NUM_MA 0x28 +#define PORT_STATE 0x2c +#define PORT_STATE_PHY8_PORT_NUM_OFF 16 +#define PORT_STATE_PHY8_PORT_NUM_MSK (0xf << PORT_STATE_PHY8_PORT_NUM_OFF) +#define PORT_STATE_PHY8_CONN_RATE_OFF 20 +#define PORT_STATE_PHY8_CONN_RATE_MSK (0xf << PORT_STATE_PHY8_CONN_RATE_OFF) +#define PHY_CONN_RATE 0x30 +#define HGC_TRANS_TASK_CNT_LIMIT 0x38 +#define AXI_AHB_CLK_CFG 0x3c +#define ITCT_CLR 0x44 +#define ITCT_CLR_EN_OFF 16 +#define ITCT_CLR_EN_MSK (0x1 << ITCT_CLR_EN_OFF) +#define ITCT_DEV_OFF 0 +#define ITCT_DEV_MSK (0x7ff << ITCT_DEV_OFF) +#define AXI_USER1 0x48 +#define AXI_USER2 0x4c +#define IO_SATA_BROKEN_MSG_ADDR_LO 0x58 +#define IO_SATA_BROKEN_MSG_ADDR_HI 0x5c +#define SATA_INITI_D2H_STORE_ADDR_LO 0x60 +#define SATA_INITI_D2H_STORE_ADDR_HI 0x64 +#define HGC_SAS_TX_OPEN_FAIL_RETRY_CTRL 0x84 +#define HGC_SAS_TXFAIL_RETRY_CTRL 0x88 +#define HGC_GET_ITV_TIME 0x90 +#define DEVICE_MSG_WORK_MODE 0x94 +#define OPENA_WT_CONTI_TIME 0x9c +#define I_T_NEXUS_LOSS_TIME 0xa0 +#define MAX_CON_TIME_LIMIT_TIME 0xa4 +#define BUS_INACTIVE_LIMIT_TIME 0xa8 +#define REJECT_TO_OPEN_LIMIT_TIME 0xac +#define CFG_AGING_TIME 0xbc +#define HGC_DFX_CFG2 0xc0 +#define HGC_IOMB_PROC1_STATUS 0x104 +#define CFG_1US_TIMER_TRSH 0xcc +#define HGC_INVLD_DQE_INFO 0x148 +#define HGC_INVLD_DQE_INFO_FB_CH0_OFF 9 +#define HGC_INVLD_DQE_INFO_FB_CH0_MSK (0x1 << HGC_INVLD_DQE_INFO_FB_CH0_OFF) +#define HGC_INVLD_DQE_INFO_FB_CH3_OFF 18 +#define INT_COAL_EN 0x19c +#define OQ_INT_COAL_TIME 0x1a0 +#define OQ_INT_COAL_CNT 0x1a4 +#define ENT_INT_COAL_TIME 0x1a8 +#define ENT_INT_COAL_CNT 0x1ac +#define OQ_INT_SRC 0x1b0 +#define OQ_INT_SRC_MSK 0x1b4 +#define ENT_INT_SRC1 0x1b8 +#define ENT_INT_SRC1_D2H_FIS_CH0_OFF 0 +#define ENT_INT_SRC1_D2H_FIS_CH0_MSK (0x1 << ENT_INT_SRC1_D2H_FIS_CH0_OFF) +#define ENT_INT_SRC1_D2H_FIS_CH1_OFF 8 +#define ENT_INT_SRC1_D2H_FIS_CH1_MSK (0x1 << ENT_INT_SRC1_D2H_FIS_CH1_OFF) +#define ENT_INT_SRC2 0x1bc +#define ENT_INT_SRC3 0x1c0 +#define ENT_INT_SRC3_ITC_INT_OFF 15 +#define ENT_INT_SRC3_ITC_INT_MSK (0x1 << ENT_INT_SRC3_ITC_INT_OFF) +#define ENT_INT_SRC_MSK1 0x1c4 +#define ENT_INT_SRC_MSK2 0x1c8 +#define ENT_INT_SRC_MSK3 0x1cc +#define ENT_INT_SRC_MSK3_ENT95_MSK_OFF 31 +#define ENT_INT_SRC_MSK3_ENT95_MSK_MSK (0x1 << ENT_INT_SRC_MSK3_ENT95_MSK_OFF) +#define SAS_ECC_INTR_MSK 0x1ec +#define HGC_ERR_STAT_EN 0x238 +#define DLVRY_Q_0_BASE_ADDR_LO 0x260 +#define DLVRY_Q_0_BASE_ADDR_HI 0x264 +#define DLVRY_Q_0_DEPTH 0x268 +#define DLVRY_Q_0_WR_PTR 0x26c +#define DLVRY_Q_0_RD_PTR 0x270 +#define HYPER_STREAM_ID_EN_CFG 0xc80 +#define OQ0_INT_SRC_MSK 0xc90 +#define COMPL_Q_0_BASE_ADDR_LO 0x4e0 +#define COMPL_Q_0_BASE_ADDR_HI 0x4e4 +#define COMPL_Q_0_DEPTH 0x4e8 +#define COMPL_Q_0_WR_PTR 0x4ec +#define COMPL_Q_0_RD_PTR 0x4f0 + +/* phy registers need init */ +#define PORT_BASE (0x2000) + +#define PHY_CFG (PORT_BASE + 0x0) +#define HARD_PHY_LINKRATE (PORT_BASE + 0x4) +#define PHY_CFG_ENA_OFF 0 +#define PHY_CFG_ENA_MSK (0x1 << PHY_CFG_ENA_OFF) +#define PHY_CFG_DC_OPT_OFF 2 +#define PHY_CFG_DC_OPT_MSK (0x1 << PHY_CFG_DC_OPT_OFF) +#define PROG_PHY_LINK_RATE (PORT_BASE + 0x8) +#define PROG_PHY_LINK_RATE_MAX_OFF 0 +#define PROG_PHY_LINK_RATE_MAX_MSK (0xff << PROG_PHY_LINK_RATE_MAX_OFF) +#define PHY_CTRL (PORT_BASE + 0x14) +#define PHY_CTRL_RESET_OFF 0 +#define PHY_CTRL_RESET_MSK (0x1 << PHY_CTRL_RESET_OFF) +#define SAS_PHY_CTRL (PORT_BASE + 0x20) +#define SL_CFG (PORT_BASE + 0x84) +#define PHY_PCN (PORT_BASE + 0x44) +#define SL_TOUT_CFG (PORT_BASE + 0x8c) +#define SL_CONTROL (PORT_BASE + 0x94) +#define SL_CONTROL_NOTIFY_EN_OFF 0 +#define SL_CONTROL_NOTIFY_EN_MSK (0x1 << SL_CONTROL_NOTIFY_EN_OFF) +#define TX_ID_DWORD0 (PORT_BASE + 0x9c) +#define TX_ID_DWORD1 (PORT_BASE + 0xa0) +#define TX_ID_DWORD2 (PORT_BASE + 0xa4) +#define TX_ID_DWORD3 (PORT_BASE + 0xa8) +#define TX_ID_DWORD4 (PORT_BASE + 0xaC) +#define TX_ID_DWORD5 (PORT_BASE + 0xb0) +#define TX_ID_DWORD6 (PORT_BASE + 0xb4) +#define RX_IDAF_DWORD0 (PORT_BASE + 0xc4) +#define RX_IDAF_DWORD1 (PORT_BASE + 0xc8) +#define RX_IDAF_DWORD2 (PORT_BASE + 0xcc) +#define RX_IDAF_DWORD3 (PORT_BASE + 0xd0) +#define RX_IDAF_DWORD4 (PORT_BASE + 0xd4) +#define RX_IDAF_DWORD5 (PORT_BASE + 0xd8) +#define RX_IDAF_DWORD6 (PORT_BASE + 0xdc) +#define RXOP_CHECK_CFG_H (PORT_BASE + 0xfc) +#define DONE_RECEIVED_TIME (PORT_BASE + 0x11c) +#define CHL_INT0 (PORT_BASE + 0x1b4) +#define CHL_INT0_HOTPLUG_TOUT_OFF 0 +#define CHL_INT0_HOTPLUG_TOUT_MSK (0x1 << CHL_INT0_HOTPLUG_TOUT_OFF) +#define CHL_INT0_SL_RX_BCST_ACK_OFF 1 +#define CHL_INT0_SL_RX_BCST_ACK_MSK (0x1 << CHL_INT0_SL_RX_BCST_ACK_OFF) +#define CHL_INT0_SL_PHY_ENABLE_OFF 2 +#define CHL_INT0_SL_PHY_ENABLE_MSK (0x1 << CHL_INT0_SL_PHY_ENABLE_OFF) +#define CHL_INT0_NOT_RDY_OFF 4 +#define CHL_INT0_NOT_RDY_MSK (0x1 << CHL_INT0_NOT_RDY_OFF) +#define CHL_INT0_PHY_RDY_OFF 5 +#define CHL_INT0_PHY_RDY_MSK (0x1 << CHL_INT0_PHY_RDY_OFF) +#define CHL_INT1 (PORT_BASE + 0x1b8) +#define CHL_INT1_DMAC_TX_ECC_ERR_OFF 15 +#define CHL_INT1_DMAC_TX_ECC_ERR_MSK (0x1 << CHL_INT1_DMAC_TX_ECC_ERR_OFF) +#define CHL_INT1_DMAC_RX_ECC_ERR_OFF 17 +#define CHL_INT1_DMAC_RX_ECC_ERR_MSK (0x1 << CHL_INT1_DMAC_RX_ECC_ERR_OFF) +#define CHL_INT2 (PORT_BASE + 0x1bc) +#define CHL_INT0_MSK (PORT_BASE + 0x1c0) +#define CHL_INT1_MSK (PORT_BASE + 0x1c4) +#define CHL_INT2_MSK (PORT_BASE + 0x1c8) +#define CHL_INT_COAL_EN (PORT_BASE + 0x1d0) +#define PHY_CTRL_RDY_MSK (PORT_BASE + 0x2b0) +#define PHYCTRL_NOT_RDY_MSK (PORT_BASE + 0x2b4) +#define PHYCTRL_DWS_RESET_MSK (PORT_BASE + 0x2b8) +#define PHYCTRL_PHY_ENA_MSK (PORT_BASE + 0x2bc) +#define SL_RX_BCAST_CHK_MSK (PORT_BASE + 0x2c0) +#define PHYCTRL_OOB_RESTART_MSK (PORT_BASE + 0x2c4) +#define DMA_TX_STATUS (PORT_BASE + 0x2d0) +#define DMA_TX_STATUS_BUSY_OFF 0 +#define DMA_TX_STATUS_BUSY_MSK (0x1 << DMA_TX_STATUS_BUSY_OFF) +#define DMA_RX_STATUS (PORT_BASE + 0x2e8) +#define DMA_RX_STATUS_BUSY_OFF 0 +#define DMA_RX_STATUS_BUSY_MSK (0x1 << DMA_RX_STATUS_BUSY_OFF) + +#define AXI_CFG (0x5100) +#define AM_CFG_MAX_TRANS (0x5010) +#define AM_CFG_SINGLE_PORT_MAX_TRANS (0x5014) + +/* HW dma structures */ +/* Delivery queue header */ +/* dw0 */ +#define CMD_HDR_RESP_REPORT_OFF 5 +#define CMD_HDR_RESP_REPORT_MSK (0x1 << CMD_HDR_RESP_REPORT_OFF) +#define CMD_HDR_TLR_CTRL_OFF 6 +#define CMD_HDR_TLR_CTRL_MSK (0x3 << CMD_HDR_TLR_CTRL_OFF) +#define CMD_HDR_PORT_OFF 18 +#define CMD_HDR_PORT_MSK (0xf << CMD_HDR_PORT_OFF) +#define CMD_HDR_PRIORITY_OFF 27 +#define CMD_HDR_PRIORITY_MSK (0x1 << CMD_HDR_PRIORITY_OFF) +#define CMD_HDR_CMD_OFF 29 +#define CMD_HDR_CMD_MSK (0x7 << CMD_HDR_CMD_OFF) +/* dw1 */ +#define CMD_HDR_DIR_OFF 5 +#define CMD_HDR_DIR_MSK (0x3 << CMD_HDR_DIR_OFF) +#define CMD_HDR_RESET_OFF 7 +#define CMD_HDR_RESET_MSK (0x1 << CMD_HDR_RESET_OFF) +#define CMD_HDR_VDTL_OFF 10 +#define CMD_HDR_VDTL_MSK (0x1 << CMD_HDR_VDTL_OFF) +#define CMD_HDR_FRAME_TYPE_OFF 11 +#define CMD_HDR_FRAME_TYPE_MSK (0x1f << CMD_HDR_FRAME_TYPE_OFF) +#define CMD_HDR_DEV_ID_OFF 16 +#define CMD_HDR_DEV_ID_MSK (0xffff << CMD_HDR_DEV_ID_OFF) +/* dw2 */ +#define CMD_HDR_CFL_OFF 0 +#define CMD_HDR_CFL_MSK (0x1ff << CMD_HDR_CFL_OFF) +#define CMD_HDR_NCQ_TAG_OFF 10 +#define CMD_HDR_NCQ_TAG_MSK (0x1f << CMD_HDR_NCQ_TAG_OFF) +#define CMD_HDR_MRFL_OFF 15 +#define CMD_HDR_MRFL_MSK (0x1ff << CMD_HDR_MRFL_OFF) +#define CMD_HDR_SG_MOD_OFF 24 +#define CMD_HDR_SG_MOD_MSK (0x3 << CMD_HDR_SG_MOD_OFF) +#define CMD_HDR_FIRST_BURST_OFF 26 +#define CMD_HDR_FIRST_BURST_MSK (0x1 << CMD_HDR_SG_MOD_OFF) +/* dw3 */ +#define CMD_HDR_IPTT_OFF 0 +#define CMD_HDR_IPTT_MSK (0xffff << CMD_HDR_IPTT_OFF) +/* dw6 */ +#define CMD_HDR_DIF_SGL_LEN_OFF 0 +#define CMD_HDR_DIF_SGL_LEN_MSK (0xffff << CMD_HDR_DIF_SGL_LEN_OFF) +#define CMD_HDR_DATA_SGL_LEN_OFF 16 +#define CMD_HDR_DATA_SGL_LEN_MSK (0xffff << CMD_HDR_DATA_SGL_LEN_OFF) + +/* Completion header */ +/* dw0 */ +#define CMPLT_HDR_RSPNS_XFRD_OFF 10 +#define CMPLT_HDR_RSPNS_XFRD_MSK (0x1 << CMPLT_HDR_RSPNS_XFRD_OFF) +#define CMPLT_HDR_ERX_OFF 12 +#define CMPLT_HDR_ERX_MSK (0x1 << CMPLT_HDR_ERX_OFF) +/* dw1 */ +#define CMPLT_HDR_IPTT_OFF 0 +#define CMPLT_HDR_IPTT_MSK (0xffff << CMPLT_HDR_IPTT_OFF) +#define CMPLT_HDR_DEV_ID_OFF 16 +#define CMPLT_HDR_DEV_ID_MSK (0xffff << CMPLT_HDR_DEV_ID_OFF) + +/* ITCT header */ +/* qw0 */ +#define ITCT_HDR_DEV_TYPE_OFF 0 +#define ITCT_HDR_DEV_TYPE_MSK (0x3 << ITCT_HDR_DEV_TYPE_OFF) +#define ITCT_HDR_VALID_OFF 2 +#define ITCT_HDR_VALID_MSK (0x1 << ITCT_HDR_VALID_OFF) +#define ITCT_HDR_MCR_OFF 5 +#define ITCT_HDR_MCR_MSK (0xf << ITCT_HDR_MCR_OFF) +#define ITCT_HDR_VLN_OFF 9 +#define ITCT_HDR_VLN_MSK (0xf << ITCT_HDR_VLN_OFF) +#define ITCT_HDR_PORT_ID_OFF 28 +#define ITCT_HDR_PORT_ID_MSK (0xf << ITCT_HDR_PORT_ID_OFF) +/* qw2 */ +#define ITCT_HDR_INLT_OFF 0 +#define ITCT_HDR_INLT_MSK (0xffffULL << ITCT_HDR_INLT_OFF) +#define ITCT_HDR_BITLT_OFF 16 +#define ITCT_HDR_BITLT_MSK (0xffffULL << ITCT_HDR_BITLT_OFF) +#define ITCT_HDR_MCTLT_OFF 32 +#define ITCT_HDR_MCTLT_MSK (0xffffULL << ITCT_HDR_MCTLT_OFF) +#define ITCT_HDR_RTOLT_OFF 48 +#define ITCT_HDR_RTOLT_MSK (0xffffULL << ITCT_HDR_RTOLT_OFF) + +struct hisi_sas_complete_v2_hdr { + __le32 dw0; + __le32 dw1; + __le32 act; + __le32 dw3; +}; + +struct hisi_sas_err_record_v2 { + /* dw0 */ + __le32 trans_tx_fail_type; + + /* dw1 */ + __le32 trans_rx_fail_type; + + /* dw2 */ + __le16 dma_tx_err_type; + __le16 sipc_rx_err_type; + + /* dw3 */ + __le32 dma_rx_err_type; +}; + +enum { + HISI_SAS_PHY_PHY_UPDOWN, + HISI_SAS_PHY_CHNL_INT, + HISI_SAS_PHY_INT_NR +}; + +enum { + TRANS_TX_FAIL_BASE = 0x0, /* dw0 */ + TRANS_RX_FAIL_BASE = 0x100, /* dw1 */ + DMA_TX_ERR_BASE = 0x200, /* dw2 bit 15-0 */ + SIPC_RX_ERR_BASE = 0x300, /* dw2 bit 31-16*/ + DMA_RX_ERR_BASE = 0x400, /* dw3 */ + + /* trans tx*/ + TRANS_TX_OPEN_FAIL_WITH_IT_NEXUS_LOSS = TRANS_TX_FAIL_BASE, /* 0x0 */ + TRANS_TX_ERR_PHY_NOT_ENABLE, /* 0x1 */ + TRANS_TX_OPEN_CNX_ERR_WRONG_DESTINATION, /* 0x2 */ + TRANS_TX_OPEN_CNX_ERR_ZONE_VIOLATION, /* 0x3 */ + TRANS_TX_OPEN_CNX_ERR_BY_OTHER, /* 0x4 */ + RESERVED0, /* 0x5 */ + TRANS_TX_OPEN_CNX_ERR_AIP_TIMEOUT, /* 0x6 */ + TRANS_TX_OPEN_CNX_ERR_STP_RESOURCES_BUSY, /* 0x7 */ + TRANS_TX_OPEN_CNX_ERR_PROTOCOL_NOT_SUPPORTED, /* 0x8 */ + TRANS_TX_OPEN_CNX_ERR_CONNECTION_RATE_NOT_SUPPORTED, /* 0x9 */ + TRANS_TX_OPEN_CNX_ERR_BAD_DESTINATION, /* 0xa */ + TRANS_TX_OPEN_CNX_ERR_BREAK_RCVD, /* 0xb */ + TRANS_TX_OPEN_CNX_ERR_LOW_PHY_POWER, /* 0xc */ + TRANS_TX_OPEN_CNX_ERR_PATHWAY_BLOCKED, /* 0xd */ + TRANS_TX_OPEN_CNX_ERR_OPEN_TIMEOUT, /* 0xe */ + TRANS_TX_OPEN_CNX_ERR_NO_DESTINATION, /* 0xf */ + TRANS_TX_OPEN_RETRY_ERR_THRESHOLD_REACHED, /* 0x10 */ + TRANS_TX_ERR_FRAME_TXED, /* 0x11 */ + TRANS_TX_ERR_WITH_BREAK_TIMEOUT, /* 0x12 */ + TRANS_TX_ERR_WITH_BREAK_REQUEST, /* 0x13 */ + TRANS_TX_ERR_WITH_BREAK_RECEVIED, /* 0x14 */ + TRANS_TX_ERR_WITH_CLOSE_TIMEOUT, /* 0x15 */ + TRANS_TX_ERR_WITH_CLOSE_NORMAL, /* 0x16 for ssp*/ + TRANS_TX_ERR_WITH_CLOSE_PHYDISALE, /* 0x17 */ + TRANS_TX_ERR_WITH_CLOSE_DWS_TIMEOUT, /* 0x18 */ + TRANS_TX_ERR_WITH_CLOSE_COMINIT, /* 0x19 */ + TRANS_TX_ERR_WITH_NAK_RECEVIED, /* 0x1a for ssp*/ + TRANS_TX_ERR_WITH_ACK_NAK_TIMEOUT, /* 0x1b for ssp*/ + /*IO_TX_ERR_WITH_R_ERR_RECEVIED, [> 0x1b for sata/stp<] */ + TRANS_TX_ERR_WITH_CREDIT_TIMEOUT, /* 0x1c for ssp */ + /*IO_RX_ERR_WITH_SATA_DEVICE_LOST 0x1c for sata/stp */ + TRANS_TX_ERR_WITH_IPTT_CONFLICT, /* 0x1d for ssp/smp */ + TRANS_TX_ERR_WITH_OPEN_BY_DES_OR_OTHERS, /* 0x1e */ + /*IO_TX_ERR_WITH_SYNC_RXD, [> 0x1e <] for sata/stp */ + TRANS_TX_ERR_WITH_WAIT_RECV_TIMEOUT, /* 0x1f for sata/stp */ + + /* trans rx */ + TRANS_RX_ERR_WITH_RXFRAME_CRC_ERR = TRANS_RX_FAIL_BASE, /* 0x100 */ + TRANS_RX_ERR_WITH_RXFIS_8B10B_DISP_ERR, /* 0x101 for sata/stp */ + TRANS_RX_ERR_WITH_RXFRAME_HAVE_ERRPRM, /* 0x102 for ssp/smp */ + /*IO_ERR_WITH_RXFIS_8B10B_CODE_ERR, [> 0x102 <] for sata/stp */ + TRANS_RX_ERR_WITH_RXFIS_DECODE_ERROR, /* 0x103 for sata/stp */ + TRANS_RX_ERR_WITH_RXFIS_CRC_ERR, /* 0x104 for sata/stp */ + TRANS_RX_ERR_WITH_RXFRAME_LENGTH_OVERRUN, /* 0x105 for smp */ + /*IO_ERR_WITH_RXFIS_TX SYNCP, [> 0x105 <] for sata/stp */ + TRANS_RX_ERR_WITH_RXFIS_RX_SYNCP, /* 0x106 for sata/stp*/ + TRANS_RX_ERR_WITH_LINK_BUF_OVERRUN, /* 0x107 */ + TRANS_RX_ERR_WITH_BREAK_TIMEOUT, /* 0x108 */ + TRANS_RX_ERR_WITH_BREAK_REQUEST, /* 0x109 */ + TRANS_RX_ERR_WITH_BREAK_RECEVIED, /* 0x10a */ + RESERVED1, /* 0x10b */ + TRANS_RX_ERR_WITH_CLOSE_NORMAL, /* 0x10c */ + TRANS_RX_ERR_WITH_CLOSE_PHY_DISABLE, /* 0x10d */ + TRANS_RX_ERR_WITH_CLOSE_DWS_TIMEOUT, /* 0x10e */ + TRANS_RX_ERR_WITH_CLOSE_COMINIT, /* 0x10f */ + TRANS_RX_ERR_WITH_DATA_LEN0, /* 0x110 for ssp/smp */ + TRANS_RX_ERR_WITH_BAD_HASH, /* 0x111 for ssp */ + /*IO_RX_ERR_WITH_FIS_TOO_SHORT, [> 0x111 <] for sata/stp */ + TRANS_RX_XRDY_WLEN_ZERO_ERR, /* 0x112 for ssp*/ + /*IO_RX_ERR_WITH_FIS_TOO_LONG, [> 0x112 <] for sata/stp */ + TRANS_RX_SSP_FRM_LEN_ERR, /* 0x113 for ssp */ + /*IO_RX_ERR_WITH_SATA_DEVICE_LOST, [> 0x113 <] for sata */ + RESERVED2, /* 0x114 */ + RESERVED3, /* 0x115 */ + RESERVED4, /* 0x116 */ + RESERVED5, /* 0x117 */ + TRANS_RX_ERR_WITH_BAD_FRM_TYPE, /* 0x118 */ + TRANS_RX_SMP_FRM_LEN_ERR, /* 0x119 */ + TRANS_RX_SMP_RESP_TIMEOUT_ERR, /* 0x11a */ + RESERVED6, /* 0x11b */ + RESERVED7, /* 0x11c */ + RESERVED8, /* 0x11d */ + RESERVED9, /* 0x11e */ + TRANS_RX_R_ERR, /* 0x11f */ + + /* dma tx */ + DMA_TX_DIF_CRC_ERR = DMA_TX_ERR_BASE, /* 0x200 */ + DMA_TX_DIF_APP_ERR, /* 0x201 */ + DMA_TX_DIF_RPP_ERR, /* 0x202 */ + DMA_TX_DATA_SGL_OVERFLOW, /* 0x203 */ + DMA_TX_DIF_SGL_OVERFLOW, /* 0x204 */ + DMA_TX_UNEXP_XFER_ERR, /* 0x205 */ + DMA_TX_UNEXP_RETRANS_ERR, /* 0x206 */ + DMA_TX_XFER_LEN_OVERFLOW, /* 0x207 */ + DMA_TX_XFER_OFFSET_ERR, /* 0x208 */ + DMA_TX_RAM_ECC_ERR, /* 0x209 */ + DMA_TX_DIF_LEN_ALIGN_ERR, /* 0x20a */ + + /* sipc rx */ + SIPC_RX_FIS_STATUS_ERR_BIT_VLD = SIPC_RX_ERR_BASE, /* 0x300 */ + SIPC_RX_PIO_WRSETUP_STATUS_DRQ_ERR, /* 0x301 */ + SIPC_RX_FIS_STATUS_BSY_BIT_ERR, /* 0x302 */ + SIPC_RX_WRSETUP_LEN_ODD_ERR, /* 0x303 */ + SIPC_RX_WRSETUP_LEN_ZERO_ERR, /* 0x304 */ + SIPC_RX_WRDATA_LEN_NOT_MATCH_ERR, /* 0x305 */ + SIPC_RX_NCQ_WRSETUP_OFFSET_ERR, /* 0x306 */ + SIPC_RX_NCQ_WRSETUP_AUTO_ACTIVE_ERR, /* 0x307 */ + SIPC_RX_SATA_UNEXP_FIS_ERR, /* 0x308 */ + SIPC_RX_WRSETUP_ESTATUS_ERR, /* 0x309 */ + SIPC_RX_DATA_UNDERFLOW_ERR, /* 0x30a */ + + /* dma rx */ + DMA_RX_DIF_CRC_ERR = DMA_RX_ERR_BASE, /* 0x400 */ + DMA_RX_DIF_APP_ERR, /* 0x401 */ + DMA_RX_DIF_RPP_ERR, /* 0x402 */ + DMA_RX_DATA_SGL_OVERFLOW, /* 0x403 */ + DMA_RX_DIF_SGL_OVERFLOW, /* 0x404 */ + DMA_RX_DATA_LEN_OVERFLOW, /* 0x405 */ + DMA_RX_DATA_LEN_UNDERFLOW, /* 0x406 */ + DMA_RX_DATA_OFFSET_ERR, /* 0x407 */ + RESERVED10, /* 0x408 */ + DMA_RX_SATA_FRAME_TYPE_ERR, /* 0x409 */ + DMA_RX_RESP_BUF_OVERFLOW, /* 0x40a */ + DMA_RX_UNEXP_RETRANS_RESP_ERR, /* 0x40b */ + DMA_RX_UNEXP_NORM_RESP_ERR, /* 0x40c */ + DMA_RX_UNEXP_RDFRAME_ERR, /* 0x40d */ + DMA_RX_PIO_DATA_LEN_ERR, /* 0x40e */ + DMA_RX_RDSETUP_STATUS_ERR, /* 0x40f */ + DMA_RX_RDSETUP_STATUS_DRQ_ERR, /* 0x410 */ + DMA_RX_RDSETUP_STATUS_BSY_ERR, /* 0x411 */ + DMA_RX_RDSETUP_LEN_ODD_ERR, /* 0x412 */ + DMA_RX_RDSETUP_LEN_ZERO_ERR, /* 0x413 */ + DMA_RX_RDSETUP_LEN_OVER_ERR, /* 0x414 */ + DMA_RX_RDSETUP_OFFSET_ERR, /* 0x415 */ + DMA_RX_RDSETUP_ACTIVE_ERR, /* 0x416 */ + DMA_RX_RDSETUP_ESTATUS_ERR, /* 0x417 */ + DMA_RX_RAM_ECC_ERR, /* 0x418 */ + DMA_RX_UNKNOWN_FRM_ERR, /* 0x419 */ +}; + +#define HISI_SAS_COMMAND_ENTRIES_V2_HW 4096 + +#define DIR_NO_DATA 0 +#define DIR_TO_INI 1 +#define DIR_TO_DEVICE 2 +#define DIR_RESERVED 3 + +#define SATA_PROTOCOL_NONDATA 0x1 +#define SATA_PROTOCOL_PIO 0x2 +#define SATA_PROTOCOL_DMA 0x4 +#define SATA_PROTOCOL_FPDMA 0x8 +#define SATA_PROTOCOL_ATAPI 0x10 + +static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off) +{ + void __iomem *regs = hisi_hba->regs + off; + + return readl(regs); +} + +static u32 hisi_sas_read32_relaxed(struct hisi_hba *hisi_hba, u32 off) +{ + void __iomem *regs = hisi_hba->regs + off; + + return readl_relaxed(regs); +} + +static void hisi_sas_write32(struct hisi_hba *hisi_hba, u32 off, u32 val) +{ + void __iomem *regs = hisi_hba->regs + off; + + writel(val, regs); +} + +static void hisi_sas_phy_write32(struct hisi_hba *hisi_hba, int phy_no, + u32 off, u32 val) +{ + void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off; + + writel(val, regs); +} + +static u32 hisi_sas_phy_read32(struct hisi_hba *hisi_hba, + int phy_no, u32 off) +{ + void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off; + + return readl(regs); +} + +static void config_phy_opt_mode_v2_hw(struct hisi_hba *hisi_hba, int phy_no) +{ + u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG); + + cfg &= ~PHY_CFG_DC_OPT_MSK; + cfg |= 1 << PHY_CFG_DC_OPT_OFF; + hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg); +} + +static void config_id_frame_v2_hw(struct hisi_hba *hisi_hba, int phy_no) +{ + struct sas_identify_frame identify_frame; + u32 *identify_buffer; + + memset(&identify_frame, 0, sizeof(identify_frame)); + identify_frame.dev_type = SAS_END_DEVICE; + identify_frame.frame_type = 0; + identify_frame._un1 = 1; + identify_frame.initiator_bits = SAS_PROTOCOL_ALL; + identify_frame.target_bits = SAS_PROTOCOL_NONE; + memcpy(&identify_frame._un4_11[0], hisi_hba->sas_addr, SAS_ADDR_SIZE); + memcpy(&identify_frame.sas_addr[0], hisi_hba->sas_addr, SAS_ADDR_SIZE); + identify_frame.phy_id = phy_no; + identify_buffer = (u32 *)(&identify_frame); + + hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD0, + __swab32(identify_buffer[0])); + hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD1, + identify_buffer[2]); + hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD2, + identify_buffer[1]); + hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD3, + identify_buffer[4]); + hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD4, + identify_buffer[3]); + hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD5, + __swab32(identify_buffer[5])); +} + +static void init_id_frame_v2_hw(struct hisi_hba *hisi_hba) +{ + int i; + + for (i = 0; i < hisi_hba->n_phy; i++) + config_id_frame_v2_hw(hisi_hba, i); +} + +static void setup_itct_v2_hw(struct hisi_hba *hisi_hba, + struct hisi_sas_device *sas_dev) +{ + struct domain_device *device = sas_dev->sas_device; + struct device *dev = &hisi_hba->pdev->dev; + u64 qw0, device_id = sas_dev->device_id; + struct hisi_sas_itct *itct = &hisi_hba->itct[device_id]; + struct domain_device *parent_dev = device->parent; + struct hisi_sas_port *port = device->port->lldd_port; + + memset(itct, 0, sizeof(*itct)); + + /* qw0 */ + qw0 = 0; + switch (sas_dev->dev_type) { + case SAS_END_DEVICE: + case SAS_EDGE_EXPANDER_DEVICE: + case SAS_FANOUT_EXPANDER_DEVICE: + qw0 = HISI_SAS_DEV_TYPE_SSP << ITCT_HDR_DEV_TYPE_OFF; + break; + case SAS_SATA_DEV: + if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) + qw0 = HISI_SAS_DEV_TYPE_STP << ITCT_HDR_DEV_TYPE_OFF; + else + qw0 = HISI_SAS_DEV_TYPE_SATA << ITCT_HDR_DEV_TYPE_OFF; + break; + default: + dev_warn(dev, "setup itct: unsupported dev type (%d)\n", + sas_dev->dev_type); + } + + qw0 |= ((1 << ITCT_HDR_VALID_OFF) | + (device->max_linkrate << ITCT_HDR_MCR_OFF) | + (1 << ITCT_HDR_VLN_OFF) | + (port->id << ITCT_HDR_PORT_ID_OFF)); + itct->qw0 = cpu_to_le64(qw0); + + /* qw1 */ + memcpy(&itct->sas_addr, device->sas_addr, SAS_ADDR_SIZE); + itct->sas_addr = __swab64(itct->sas_addr); + + /* qw2 */ + itct->qw2 = cpu_to_le64((500ULL << ITCT_HDR_INLT_OFF) | + (0xff00ULL << ITCT_HDR_BITLT_OFF) | + (0xff00ULL << ITCT_HDR_MCTLT_OFF) | + (0xff00ULL << ITCT_HDR_RTOLT_OFF)); +} + +static void free_device_v2_hw(struct hisi_hba *hisi_hba, + struct hisi_sas_device *sas_dev) +{ + u64 qw0, dev_id = sas_dev->device_id; + struct device *dev = &hisi_hba->pdev->dev; + struct hisi_sas_itct *itct = &hisi_hba->itct[dev_id]; + u32 reg_val = hisi_sas_read32(hisi_hba, ENT_INT_SRC3); + int i; + + /* clear the itct interrupt state */ + if (ENT_INT_SRC3_ITC_INT_MSK & reg_val) + hisi_sas_write32(hisi_hba, ENT_INT_SRC3, + ENT_INT_SRC3_ITC_INT_MSK); + + /* clear the itct int*/ + for (i = 0; i < 2; i++) { + /* clear the itct table*/ + reg_val = hisi_sas_read32(hisi_hba, ITCT_CLR); + reg_val |= ITCT_CLR_EN_MSK | (dev_id & ITCT_DEV_MSK); + hisi_sas_write32(hisi_hba, ITCT_CLR, reg_val); + + udelay(10); + reg_val = hisi_sas_read32(hisi_hba, ENT_INT_SRC3); + if (ENT_INT_SRC3_ITC_INT_MSK & reg_val) { + dev_dbg(dev, "got clear ITCT done interrupt\n"); + + /* invalid the itct state*/ + qw0 = cpu_to_le64(itct->qw0); + qw0 &= ~(1 << ITCT_HDR_VALID_OFF); + hisi_sas_write32(hisi_hba, ENT_INT_SRC3, + ENT_INT_SRC3_ITC_INT_MSK); + hisi_hba->devices[dev_id].dev_type = SAS_PHY_UNUSED; + hisi_hba->devices[dev_id].dev_status = HISI_SAS_DEV_NORMAL; + + /* clear the itct */ + hisi_sas_write32(hisi_hba, ITCT_CLR, 0); + dev_dbg(dev, "clear ITCT ok\n"); + break; + } + } +} + +static int reset_hw_v2_hw(struct hisi_hba *hisi_hba) +{ + int i, reset_val; + u32 val; + unsigned long end_time; + struct device *dev = &hisi_hba->pdev->dev; + + /* The mask needs to be set depending on the number of phys */ + if (hisi_hba->n_phy == 9) + reset_val = 0x1fffff; + else + reset_val = 0x7ffff; + + /* Disable all of the DQ */ + for (i = 0; i < HISI_SAS_MAX_QUEUES; i++) + hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0); + + /* Disable all of the PHYs */ + for (i = 0; i < hisi_hba->n_phy; i++) { + u32 phy_cfg = hisi_sas_phy_read32(hisi_hba, i, PHY_CFG); + + phy_cfg &= ~PHY_CTRL_RESET_MSK; + hisi_sas_phy_write32(hisi_hba, i, PHY_CFG, phy_cfg); + } + udelay(50); + + /* Ensure DMA tx & rx idle */ + for (i = 0; i < hisi_hba->n_phy; i++) { + u32 dma_tx_status, dma_rx_status; + + end_time = jiffies + msecs_to_jiffies(1000); + + while (1) { + dma_tx_status = hisi_sas_phy_read32(hisi_hba, i, + DMA_TX_STATUS); + dma_rx_status = hisi_sas_phy_read32(hisi_hba, i, + DMA_RX_STATUS); + + if (!(dma_tx_status & DMA_TX_STATUS_BUSY_MSK) && + !(dma_rx_status & DMA_RX_STATUS_BUSY_MSK)) + break; + + msleep(20); + if (time_after(jiffies, end_time)) + return -EIO; + } + } + + /* Ensure axi bus idle */ + end_time = jiffies + msecs_to_jiffies(1000); + while (1) { + u32 axi_status = + hisi_sas_read32(hisi_hba, AXI_CFG); + + if (axi_status == 0) + break; + + msleep(20); + if (time_after(jiffies, end_time)) + return -EIO; + } + + /* reset and disable clock*/ + regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_reset_reg, + reset_val); + regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_clock_ena_reg + 4, + reset_val); + msleep(1); + regmap_read(hisi_hba->ctrl, hisi_hba->ctrl_reset_sts_reg, &val); + if (reset_val != (val & reset_val)) { + dev_err(dev, "SAS reset fail.\n"); + return -EIO; + } + + /* De-reset and enable clock*/ + regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_reset_reg + 4, + reset_val); + regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_clock_ena_reg, + reset_val); + msleep(1); + regmap_read(hisi_hba->ctrl, hisi_hba->ctrl_reset_sts_reg, + &val); + if (val & reset_val) { + dev_err(dev, "SAS de-reset fail.\n"); + return -EIO; + } + + return 0; +} + +static void init_reg_v2_hw(struct hisi_hba *hisi_hba) +{ + struct device *dev = &hisi_hba->pdev->dev; + struct device_node *np = dev->of_node; + int i; + + /* Global registers init */ + + /* Deal with am-max-transmissions quirk */ + if (of_get_property(np, "hip06-sas-v2-quirk-amt", NULL)) { + hisi_sas_write32(hisi_hba, AM_CFG_MAX_TRANS, 0x2020); + hisi_sas_write32(hisi_hba, AM_CFG_SINGLE_PORT_MAX_TRANS, + 0x2020); + } /* Else, use defaults -> do nothing */ + + hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, + (u32)((1ULL << hisi_hba->queue_count) - 1)); + hisi_sas_write32(hisi_hba, AXI_USER1, 0xc0000000); + hisi_sas_write32(hisi_hba, AXI_USER2, 0x10000); + hisi_sas_write32(hisi_hba, HGC_SAS_TXFAIL_RETRY_CTRL, 0x108); + hisi_sas_write32(hisi_hba, HGC_SAS_TX_OPEN_FAIL_RETRY_CTRL, 0x7FF); + hisi_sas_write32(hisi_hba, OPENA_WT_CONTI_TIME, 0x1); + hisi_sas_write32(hisi_hba, I_T_NEXUS_LOSS_TIME, 0x1F4); + hisi_sas_write32(hisi_hba, MAX_CON_TIME_LIMIT_TIME, 0x4E20); + hisi_sas_write32(hisi_hba, BUS_INACTIVE_LIMIT_TIME, 0x1); + hisi_sas_write32(hisi_hba, CFG_AGING_TIME, 0x1); + hisi_sas_write32(hisi_hba, HGC_ERR_STAT_EN, 0x1); + hisi_sas_write32(hisi_hba, HGC_GET_ITV_TIME, 0x1); + hisi_sas_write32(hisi_hba, INT_COAL_EN, 0x1); + hisi_sas_write32(hisi_hba, OQ_INT_COAL_TIME, 0x1); + hisi_sas_write32(hisi_hba, OQ_INT_COAL_CNT, 0x1); + hisi_sas_write32(hisi_hba, ENT_INT_COAL_TIME, 0x1); + hisi_sas_write32(hisi_hba, ENT_INT_COAL_CNT, 0x1); + hisi_sas_write32(hisi_hba, OQ_INT_SRC, 0x0); + hisi_sas_write32(hisi_hba, ENT_INT_SRC1, 0xffffffff); + hisi_sas_write32(hisi_hba, ENT_INT_SRC2, 0xffffffff); + hisi_sas_write32(hisi_hba, ENT_INT_SRC3, 0xffffffff); + hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0x7efefefe); + hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0x7efefefe); + hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, 0x7ffffffe); + hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0xfffff3c0); + for (i = 0; i < hisi_hba->queue_count; i++) + hisi_sas_write32(hisi_hba, OQ0_INT_SRC_MSK+0x4*i, 0); + + hisi_sas_write32(hisi_hba, AXI_AHB_CLK_CFG, 1); + hisi_sas_write32(hisi_hba, HYPER_STREAM_ID_EN_CFG, 1); + + for (i = 0; i < hisi_hba->n_phy; i++) { + hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE, 0x855); + hisi_sas_phy_write32(hisi_hba, i, SAS_PHY_CTRL, 0x30b9908); + hisi_sas_phy_write32(hisi_hba, i, SL_TOUT_CFG, 0x7d7d7d7d); + hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 0x10); + hisi_sas_phy_write32(hisi_hba, i, CHL_INT0, 0xffffffff); + hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, 0xffffffff); + hisi_sas_phy_write32(hisi_hba, i, CHL_INT2, 0xffffffff); + hisi_sas_phy_write32(hisi_hba, i, RXOP_CHECK_CFG_H, 0x1000); + hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0xffffffff); + hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x8ffffbff); + hisi_sas_phy_write32(hisi_hba, i, SL_CFG, 0x23f801fc); + hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL_RDY_MSK, 0x0); + hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_NOT_RDY_MSK, 0x0); + hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_DWS_RESET_MSK, 0x0); + hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_PHY_ENA_MSK, 0x0); + hisi_sas_phy_write32(hisi_hba, i, SL_RX_BCAST_CHK_MSK, 0x0); + hisi_sas_phy_write32(hisi_hba, i, CHL_INT_COAL_EN, 0x0); + hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_OOB_RESTART_MSK, 0x0); + hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL, 0x199B694); + } + + for (i = 0; i < hisi_hba->queue_count; i++) { + /* Delivery queue */ + hisi_sas_write32(hisi_hba, + DLVRY_Q_0_BASE_ADDR_HI + (i * 0x14), + upper_32_bits(hisi_hba->cmd_hdr_dma[i])); + + hisi_sas_write32(hisi_hba, DLVRY_Q_0_BASE_ADDR_LO + (i * 0x14), + lower_32_bits(hisi_hba->cmd_hdr_dma[i])); + + hisi_sas_write32(hisi_hba, DLVRY_Q_0_DEPTH + (i * 0x14), + HISI_SAS_QUEUE_SLOTS); + + /* Completion queue */ + hisi_sas_write32(hisi_hba, COMPL_Q_0_BASE_ADDR_HI + (i * 0x14), + upper_32_bits(hisi_hba->complete_hdr_dma[i])); + + hisi_sas_write32(hisi_hba, COMPL_Q_0_BASE_ADDR_LO + (i * 0x14), + lower_32_bits(hisi_hba->complete_hdr_dma[i])); + + hisi_sas_write32(hisi_hba, COMPL_Q_0_DEPTH + (i * 0x14), + HISI_SAS_QUEUE_SLOTS); + } + + /* itct */ + hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_LO, + lower_32_bits(hisi_hba->itct_dma)); + + hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_HI, + upper_32_bits(hisi_hba->itct_dma)); + + /* iost */ + hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_LO, + lower_32_bits(hisi_hba->iost_dma)); + + hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_HI, + upper_32_bits(hisi_hba->iost_dma)); + + /* breakpoint */ + hisi_sas_write32(hisi_hba, IO_BROKEN_MSG_ADDR_LO, + lower_32_bits(hisi_hba->breakpoint_dma)); + + hisi_sas_write32(hisi_hba, IO_BROKEN_MSG_ADDR_HI, + upper_32_bits(hisi_hba->breakpoint_dma)); + + /* SATA broken msg */ + hisi_sas_write32(hisi_hba, IO_SATA_BROKEN_MSG_ADDR_LO, + lower_32_bits(hisi_hba->sata_breakpoint_dma)); + + hisi_sas_write32(hisi_hba, IO_SATA_BROKEN_MSG_ADDR_HI, + upper_32_bits(hisi_hba->sata_breakpoint_dma)); + + /* SATA initial fis */ + hisi_sas_write32(hisi_hba, SATA_INITI_D2H_STORE_ADDR_LO, + lower_32_bits(hisi_hba->initial_fis_dma)); + + hisi_sas_write32(hisi_hba, SATA_INITI_D2H_STORE_ADDR_HI, + upper_32_bits(hisi_hba->initial_fis_dma)); +} + +static int hw_init_v2_hw(struct hisi_hba *hisi_hba) +{ + struct device *dev = &hisi_hba->pdev->dev; + int rc; + + rc = reset_hw_v2_hw(hisi_hba); + if (rc) { + dev_err(dev, "hisi_sas_reset_hw failed, rc=%d", rc); + return rc; + } + + msleep(100); + init_reg_v2_hw(hisi_hba); + + init_id_frame_v2_hw(hisi_hba); + + return 0; +} + +static void enable_phy_v2_hw(struct hisi_hba *hisi_hba, int phy_no) +{ + u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG); + + cfg |= PHY_CFG_ENA_MSK; + hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg); +} + +static void disable_phy_v2_hw(struct hisi_hba *hisi_hba, int phy_no) +{ + u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG); + + cfg &= ~PHY_CFG_ENA_MSK; + hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg); +} + +static void start_phy_v2_hw(struct hisi_hba *hisi_hba, int phy_no) +{ + config_id_frame_v2_hw(hisi_hba, phy_no); + config_phy_opt_mode_v2_hw(hisi_hba, phy_no); + enable_phy_v2_hw(hisi_hba, phy_no); +} + +static void stop_phy_v2_hw(struct hisi_hba *hisi_hba, int phy_no) +{ + disable_phy_v2_hw(hisi_hba, phy_no); +} + +static void phy_hard_reset_v2_hw(struct hisi_hba *hisi_hba, int phy_no) +{ + stop_phy_v2_hw(hisi_hba, phy_no); + msleep(100); + start_phy_v2_hw(hisi_hba, phy_no); +} + +static void start_phys_v2_hw(unsigned long data) +{ + struct hisi_hba *hisi_hba = (struct hisi_hba *)data; + int i; + + for (i = 0; i < hisi_hba->n_phy; i++) + start_phy_v2_hw(hisi_hba, i); +} + +static void phys_init_v2_hw(struct hisi_hba *hisi_hba) +{ + int i; + struct timer_list *timer = &hisi_hba->timer; + + for (i = 0; i < hisi_hba->n_phy; i++) { + hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x6a); + hisi_sas_phy_read32(hisi_hba, i, CHL_INT2_MSK); + } + + setup_timer(timer, start_phys_v2_hw, (unsigned long)hisi_hba); + mod_timer(timer, jiffies + HZ); +} + +static void sl_notify_v2_hw(struct hisi_hba *hisi_hba, int phy_no) +{ + u32 sl_control; + + sl_control = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL); + sl_control |= SL_CONTROL_NOTIFY_EN_MSK; + hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control); + msleep(1); + sl_control = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL); + sl_control &= ~SL_CONTROL_NOTIFY_EN_MSK; + hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control); +} + +static int get_wideport_bitmap_v2_hw(struct hisi_hba *hisi_hba, int port_id) +{ + int i, bitmap = 0; + u32 phy_port_num_ma = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA); + u32 phy_state = hisi_sas_read32(hisi_hba, PHY_STATE); + + for (i = 0; i < (hisi_hba->n_phy < 9 ? hisi_hba->n_phy : 8); i++) + if (phy_state & 1 << i) + if (((phy_port_num_ma >> (i * 4)) & 0xf) == port_id) + bitmap |= 1 << i; + + if (hisi_hba->n_phy == 9) { + u32 port_state = hisi_sas_read32(hisi_hba, PORT_STATE); + + if (phy_state & 1 << 8) + if (((port_state & PORT_STATE_PHY8_PORT_NUM_MSK) >> + PORT_STATE_PHY8_PORT_NUM_OFF) == port_id) + bitmap |= 1 << 9; + } + + return bitmap; +} + +/** + * This function allocates across all queues to load balance. + * Slots are allocated from queues in a round-robin fashion. + * + * The callpath to this function and upto writing the write + * queue pointer should be safe from interruption. + */ +static int get_free_slot_v2_hw(struct hisi_hba *hisi_hba, int *q, int *s) +{ + struct device *dev = &hisi_hba->pdev->dev; + u32 r, w; + int queue = hisi_hba->queue; + + while (1) { + w = hisi_sas_read32_relaxed(hisi_hba, + DLVRY_Q_0_WR_PTR + (queue * 0x14)); + r = hisi_sas_read32_relaxed(hisi_hba, + DLVRY_Q_0_RD_PTR + (queue * 0x14)); + if (r == (w+1) % HISI_SAS_QUEUE_SLOTS) { + queue = (queue + 1) % hisi_hba->queue_count; + if (queue == hisi_hba->queue) { + dev_warn(dev, "could not find free slot\n"); + return -EAGAIN; + } + continue; + } + break; + } + hisi_hba->queue = (queue + 1) % hisi_hba->queue_count; + *q = queue; + *s = w; + return 0; +} + +static void start_delivery_v2_hw(struct hisi_hba *hisi_hba) +{ + int dlvry_queue = hisi_hba->slot_prep->dlvry_queue; + int dlvry_queue_slot = hisi_hba->slot_prep->dlvry_queue_slot; + + hisi_sas_write32(hisi_hba, DLVRY_Q_0_WR_PTR + (dlvry_queue * 0x14), + ++dlvry_queue_slot % HISI_SAS_QUEUE_SLOTS); +} + +static int prep_prd_sge_v2_hw(struct hisi_hba *hisi_hba, + struct hisi_sas_slot *slot, + struct hisi_sas_cmd_hdr *hdr, + struct scatterlist *scatter, + int n_elem) +{ + struct device *dev = &hisi_hba->pdev->dev; + struct scatterlist *sg; + int i; + + if (n_elem > HISI_SAS_SGE_PAGE_CNT) { + dev_err(dev, "prd err: n_elem(%d) > HISI_SAS_SGE_PAGE_CNT", + n_elem); + return -EINVAL; + } + + slot->sge_page = dma_pool_alloc(hisi_hba->sge_page_pool, GFP_ATOMIC, + &slot->sge_page_dma); + if (!slot->sge_page) + return -ENOMEM; + + for_each_sg(scatter, sg, n_elem, i) { + struct hisi_sas_sge *entry = &slot->sge_page->sge[i]; + + entry->addr = cpu_to_le64(sg_dma_address(sg)); + entry->page_ctrl_0 = entry->page_ctrl_1 = 0; + entry->data_len = cpu_to_le32(sg_dma_len(sg)); + entry->data_off = 0; + } + + hdr->prd_table_addr = cpu_to_le64(slot->sge_page_dma); + + hdr->sg_len = cpu_to_le32(n_elem << CMD_HDR_DATA_SGL_LEN_OFF); + + return 0; +} + +static int prep_smp_v2_hw(struct hisi_hba *hisi_hba, + struct hisi_sas_slot *slot) +{ + struct sas_task *task = slot->task; + struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr; + struct domain_device *device = task->dev; + struct device *dev = &hisi_hba->pdev->dev; + struct hisi_sas_port *port = slot->port; + struct scatterlist *sg_req, *sg_resp; + struct hisi_sas_device *sas_dev = device->lldd_dev; + dma_addr_t req_dma_addr; + unsigned int req_len, resp_len; + int elem, rc; + + /* + * DMA-map SMP request, response buffers + */ + /* req */ + sg_req = &task->smp_task.smp_req; + elem = dma_map_sg(dev, sg_req, 1, DMA_TO_DEVICE); + if (!elem) + return -ENOMEM; + req_len = sg_dma_len(sg_req); + req_dma_addr = sg_dma_address(sg_req); + + /* resp */ + sg_resp = &task->smp_task.smp_resp; + elem = dma_map_sg(dev, sg_resp, 1, DMA_FROM_DEVICE); + if (!elem) { + rc = -ENOMEM; + goto err_out_req; + } + resp_len = sg_dma_len(sg_resp); + if ((req_len & 0x3) || (resp_len & 0x3)) { + rc = -EINVAL; + goto err_out_resp; + } + + /* create header */ + /* dw0 */ + hdr->dw0 = cpu_to_le32((port->id << CMD_HDR_PORT_OFF) | + (1 << CMD_HDR_PRIORITY_OFF) | /* high pri */ + (2 << CMD_HDR_CMD_OFF)); /* smp */ + + /* map itct entry */ + hdr->dw1 = cpu_to_le32((sas_dev->device_id << CMD_HDR_DEV_ID_OFF) | + (1 << CMD_HDR_FRAME_TYPE_OFF) | + (DIR_NO_DATA << CMD_HDR_DIR_OFF)); + + /* dw2 */ + hdr->dw2 = cpu_to_le32((((req_len - 4) / 4) << CMD_HDR_CFL_OFF) | + (HISI_SAS_MAX_SMP_RESP_SZ / 4 << + CMD_HDR_MRFL_OFF)); + + hdr->transfer_tags = cpu_to_le32(slot->idx << CMD_HDR_IPTT_OFF); + + hdr->cmd_table_addr = cpu_to_le64(req_dma_addr); + hdr->sts_buffer_addr = cpu_to_le64(slot->status_buffer_dma); + + return 0; + +err_out_resp: + dma_unmap_sg(dev, &slot->task->smp_task.smp_resp, 1, + DMA_FROM_DEVICE); +err_out_req: + dma_unmap_sg(dev, &slot->task->smp_task.smp_req, 1, + DMA_TO_DEVICE); + return rc; +} + +static int prep_ssp_v2_hw(struct hisi_hba *hisi_hba, + struct hisi_sas_slot *slot, int is_tmf, + struct hisi_sas_tmf_task *tmf) +{ + struct sas_task *task = slot->task; + struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr; + struct domain_device *device = task->dev; + struct hisi_sas_device *sas_dev = device->lldd_dev; + struct hisi_sas_port *port = slot->port; + struct sas_ssp_task *ssp_task = &task->ssp_task; + struct scsi_cmnd *scsi_cmnd = ssp_task->cmd; + int has_data = 0, rc, priority = is_tmf; + u8 *buf_cmd; + u32 dw1 = 0, dw2 = 0; + + hdr->dw0 = cpu_to_le32((1 << CMD_HDR_RESP_REPORT_OFF) | + (2 << CMD_HDR_TLR_CTRL_OFF) | + (port->id << CMD_HDR_PORT_OFF) | + (priority << CMD_HDR_PRIORITY_OFF) | + (1 << CMD_HDR_CMD_OFF)); /* ssp */ + + dw1 = 1 << CMD_HDR_VDTL_OFF; + if (is_tmf) { + dw1 |= 2 << CMD_HDR_FRAME_TYPE_OFF; + dw1 |= DIR_NO_DATA << CMD_HDR_DIR_OFF; + } else { + dw1 |= 1 << CMD_HDR_FRAME_TYPE_OFF; + switch (scsi_cmnd->sc_data_direction) { + case DMA_TO_DEVICE: + has_data = 1; + dw1 |= DIR_TO_DEVICE << CMD_HDR_DIR_OFF; + break; + case DMA_FROM_DEVICE: + has_data = 1; + dw1 |= DIR_TO_INI << CMD_HDR_DIR_OFF; + break; + default: + dw1 &= ~CMD_HDR_DIR_MSK; + } + } + + /* map itct entry */ + dw1 |= sas_dev->device_id << CMD_HDR_DEV_ID_OFF; + hdr->dw1 = cpu_to_le32(dw1); + + dw2 = (((sizeof(struct ssp_command_iu) + sizeof(struct ssp_frame_hdr) + + 3) / 4) << CMD_HDR_CFL_OFF) | + ((HISI_SAS_MAX_SSP_RESP_SZ / 4) << CMD_HDR_MRFL_OFF) | + (2 << CMD_HDR_SG_MOD_OFF); + hdr->dw2 = cpu_to_le32(dw2); + + hdr->transfer_tags = cpu_to_le32(slot->idx); + + if (has_data) { + rc = prep_prd_sge_v2_hw(hisi_hba, slot, hdr, task->scatter, + slot->n_elem); + if (rc) + return rc; + } + + hdr->data_transfer_len = cpu_to_le32(task->total_xfer_len); + hdr->cmd_table_addr = cpu_to_le64(slot->command_table_dma); + hdr->sts_buffer_addr = cpu_to_le64(slot->status_buffer_dma); + + buf_cmd = slot->command_table + sizeof(struct ssp_frame_hdr); + + memcpy(buf_cmd, &task->ssp_task.LUN, 8); + if (!is_tmf) { + buf_cmd[9] = task->ssp_task.task_attr | + (task->ssp_task.task_prio << 3); + memcpy(buf_cmd + 12, task->ssp_task.cmd->cmnd, + task->ssp_task.cmd->cmd_len); + } else { + buf_cmd[10] = tmf->tmf; + switch (tmf->tmf) { + case TMF_ABORT_TASK: + case TMF_QUERY_TASK: + buf_cmd[12] = + (tmf->tag_of_task_to_be_managed >> 8) & 0xff; + buf_cmd[13] = + tmf->tag_of_task_to_be_managed & 0xff; + break; + default: + break; + } + } + + return 0; +} + +static void sata_done_v2_hw(struct hisi_hba *hisi_hba, struct sas_task *task, + struct hisi_sas_slot *slot) +{ + struct task_status_struct *ts = &task->task_status; + struct ata_task_resp *resp = (struct ata_task_resp *)ts->buf; + struct dev_to_host_fis *d2h = slot->status_buffer + + sizeof(struct hisi_sas_err_record); + + resp->frame_len = sizeof(struct dev_to_host_fis); + memcpy(&resp->ending_fis[0], d2h, sizeof(struct dev_to_host_fis)); + + ts->buf_valid_size = sizeof(*resp); +} + +/* by default, task resp is complete */ +static void slot_err_v2_hw(struct hisi_hba *hisi_hba, + struct sas_task *task, + struct hisi_sas_slot *slot) +{ + struct task_status_struct *ts = &task->task_status; + struct hisi_sas_err_record_v2 *err_record = slot->status_buffer; + u32 trans_tx_fail_type = cpu_to_le32(err_record->trans_tx_fail_type); + u32 trans_rx_fail_type = cpu_to_le32(err_record->trans_rx_fail_type); + u16 dma_tx_err_type = cpu_to_le16(err_record->dma_tx_err_type); + u16 sipc_rx_err_type = cpu_to_le16(err_record->sipc_rx_err_type); + u32 dma_rx_err_type = cpu_to_le32(err_record->dma_rx_err_type); + int error = -1; + + if (dma_rx_err_type) { + error = ffs(dma_rx_err_type) + - 1 + DMA_RX_ERR_BASE; + } else if (sipc_rx_err_type) { + error = ffs(sipc_rx_err_type) + - 1 + SIPC_RX_ERR_BASE; + } else if (dma_tx_err_type) { + error = ffs(dma_tx_err_type) + - 1 + DMA_TX_ERR_BASE; + } else if (trans_rx_fail_type) { + error = ffs(trans_rx_fail_type) + - 1 + TRANS_RX_FAIL_BASE; + } else if (trans_tx_fail_type) { + error = ffs(trans_tx_fail_type) + - 1 + TRANS_TX_FAIL_BASE; + } + + switch (task->task_proto) { + case SAS_PROTOCOL_SSP: + { + switch (error) { + case TRANS_TX_OPEN_CNX_ERR_NO_DESTINATION: + { + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_NO_DEST; + break; + } + case TRANS_TX_OPEN_CNX_ERR_PATHWAY_BLOCKED: + { + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_PATH_BLOCKED; + break; + } + case TRANS_TX_OPEN_CNX_ERR_PROTOCOL_NOT_SUPPORTED: + { + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_EPROTO; + break; + } + case TRANS_TX_OPEN_CNX_ERR_CONNECTION_RATE_NOT_SUPPORTED: + { + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_CONN_RATE; + break; + } + case TRANS_TX_OPEN_CNX_ERR_BAD_DESTINATION: + { + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_BAD_DEST; + break; + } + case TRANS_TX_OPEN_CNX_ERR_BREAK_RCVD: + { + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + break; + } + case TRANS_TX_OPEN_CNX_ERR_WRONG_DESTINATION: + { + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_WRONG_DEST; + break; + } + case TRANS_TX_OPEN_CNX_ERR_ZONE_VIOLATION: + { + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_UNKNOWN; + break; + } + case TRANS_TX_OPEN_CNX_ERR_LOW_PHY_POWER: + { + /* not sure */ + ts->stat = SAS_DEV_NO_RESPONSE; + break; + } + case TRANS_RX_ERR_WITH_CLOSE_PHY_DISABLE: + { + ts->stat = SAS_PHY_DOWN; + break; + } + case TRANS_TX_OPEN_CNX_ERR_OPEN_TIMEOUT: + { + ts->stat = SAS_OPEN_TO; + break; + } + case DMA_RX_DATA_LEN_OVERFLOW: + { + ts->stat = SAS_DATA_OVERRUN; + ts->residual = 0; + break; + } + case DMA_RX_DATA_LEN_UNDERFLOW: + case SIPC_RX_DATA_UNDERFLOW_ERR: + { + ts->residual = trans_tx_fail_type; + ts->stat = SAS_DATA_UNDERRUN; + break; + } + case TRANS_TX_ERR_FRAME_TXED: + { + /* This will request a retry */ + ts->stat = SAS_QUEUE_FULL; + slot->abort = 1; + break; + } + case TRANS_TX_OPEN_FAIL_WITH_IT_NEXUS_LOSS: + case TRANS_TX_ERR_PHY_NOT_ENABLE: + case TRANS_TX_OPEN_CNX_ERR_BY_OTHER: + case TRANS_TX_OPEN_CNX_ERR_AIP_TIMEOUT: + case TRANS_TX_OPEN_RETRY_ERR_THRESHOLD_REACHED: + case TRANS_TX_ERR_WITH_BREAK_TIMEOUT: + case TRANS_TX_ERR_WITH_BREAK_REQUEST: + case TRANS_TX_ERR_WITH_BREAK_RECEVIED: + case TRANS_TX_ERR_WITH_CLOSE_TIMEOUT: + case TRANS_TX_ERR_WITH_CLOSE_NORMAL: + case TRANS_TX_ERR_WITH_CLOSE_DWS_TIMEOUT: + case TRANS_TX_ERR_WITH_CLOSE_COMINIT: + case TRANS_TX_ERR_WITH_NAK_RECEVIED: + case TRANS_TX_ERR_WITH_ACK_NAK_TIMEOUT: + case TRANS_TX_ERR_WITH_IPTT_CONFLICT: + case TRANS_TX_ERR_WITH_CREDIT_TIMEOUT: + case TRANS_RX_ERR_WITH_RXFRAME_CRC_ERR: + case TRANS_RX_ERR_WITH_RXFIS_8B10B_DISP_ERR: + case TRANS_RX_ERR_WITH_RXFRAME_HAVE_ERRPRM: + case TRANS_RX_ERR_WITH_BREAK_TIMEOUT: + case TRANS_RX_ERR_WITH_BREAK_REQUEST: + case TRANS_RX_ERR_WITH_BREAK_RECEVIED: + case TRANS_RX_ERR_WITH_CLOSE_NORMAL: + case TRANS_RX_ERR_WITH_CLOSE_DWS_TIMEOUT: + case TRANS_RX_ERR_WITH_CLOSE_COMINIT: + case TRANS_RX_ERR_WITH_DATA_LEN0: + case TRANS_RX_ERR_WITH_BAD_HASH: + case TRANS_RX_XRDY_WLEN_ZERO_ERR: + case TRANS_RX_SSP_FRM_LEN_ERR: + case TRANS_RX_ERR_WITH_BAD_FRM_TYPE: + case DMA_TX_UNEXP_XFER_ERR: + case DMA_TX_UNEXP_RETRANS_ERR: + case DMA_TX_XFER_LEN_OVERFLOW: + case DMA_TX_XFER_OFFSET_ERR: + case DMA_RX_DATA_OFFSET_ERR: + case DMA_RX_UNEXP_NORM_RESP_ERR: + case DMA_RX_UNEXP_RDFRAME_ERR: + case DMA_RX_UNKNOWN_FRM_ERR: + { + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_UNKNOWN; + break; + } + default: + break; + } + } + break; + case SAS_PROTOCOL_SMP: + ts->stat = SAM_STAT_CHECK_CONDITION; + break; + + case SAS_PROTOCOL_SATA: + case SAS_PROTOCOL_STP: + case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: + { + switch (error) { + case TRANS_TX_OPEN_CNX_ERR_LOW_PHY_POWER: + case TRANS_TX_OPEN_CNX_ERR_PATHWAY_BLOCKED: + case TRANS_TX_OPEN_CNX_ERR_NO_DESTINATION: + { + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_DEV_NO_RESPONSE; + break; + } + case TRANS_TX_OPEN_CNX_ERR_PROTOCOL_NOT_SUPPORTED: + case TRANS_TX_OPEN_CNX_ERR_CONNECTION_RATE_NOT_SUPPORTED: + case TRANS_TX_OPEN_CNX_ERR_BAD_DESTINATION: + case TRANS_TX_OPEN_CNX_ERR_BREAK_RCVD: + case TRANS_TX_OPEN_CNX_ERR_WRONG_DESTINATION: + case TRANS_TX_OPEN_CNX_ERR_ZONE_VIOLATION: + case TRANS_TX_OPEN_CNX_ERR_STP_RESOURCES_BUSY: + { + ts->stat = SAS_OPEN_REJECT; + break; + } + case TRANS_TX_OPEN_CNX_ERR_OPEN_TIMEOUT: + { + ts->stat = SAS_OPEN_TO; + break; + } + case DMA_RX_DATA_LEN_OVERFLOW: + { + ts->stat = SAS_DATA_OVERRUN; + break; + } + case TRANS_TX_OPEN_FAIL_WITH_IT_NEXUS_LOSS: + case TRANS_TX_ERR_PHY_NOT_ENABLE: + case TRANS_TX_OPEN_CNX_ERR_BY_OTHER: + case TRANS_TX_OPEN_CNX_ERR_AIP_TIMEOUT: + case TRANS_TX_OPEN_RETRY_ERR_THRESHOLD_REACHED: + case TRANS_TX_ERR_WITH_BREAK_TIMEOUT: + case TRANS_TX_ERR_WITH_BREAK_REQUEST: + case TRANS_TX_ERR_WITH_BREAK_RECEVIED: + case TRANS_TX_ERR_WITH_CLOSE_TIMEOUT: + case TRANS_TX_ERR_WITH_CLOSE_NORMAL: + case TRANS_TX_ERR_WITH_CLOSE_DWS_TIMEOUT: + case TRANS_TX_ERR_WITH_CLOSE_COMINIT: + case TRANS_TX_ERR_WITH_NAK_RECEVIED: + case TRANS_TX_ERR_WITH_ACK_NAK_TIMEOUT: + case TRANS_TX_ERR_WITH_CREDIT_TIMEOUT: + case TRANS_TX_ERR_WITH_WAIT_RECV_TIMEOUT: + case TRANS_RX_ERR_WITH_RXFIS_8B10B_DISP_ERR: + case TRANS_RX_ERR_WITH_RXFRAME_HAVE_ERRPRM: + case TRANS_RX_ERR_WITH_RXFIS_DECODE_ERROR: + case TRANS_RX_ERR_WITH_RXFIS_CRC_ERR: + case TRANS_RX_ERR_WITH_RXFRAME_LENGTH_OVERRUN: + case TRANS_RX_ERR_WITH_RXFIS_RX_SYNCP: + case TRANS_RX_ERR_WITH_CLOSE_NORMAL: + case TRANS_RX_ERR_WITH_CLOSE_PHY_DISABLE: + case TRANS_RX_ERR_WITH_CLOSE_DWS_TIMEOUT: + case TRANS_RX_ERR_WITH_CLOSE_COMINIT: + case TRANS_RX_ERR_WITH_DATA_LEN0: + case TRANS_RX_ERR_WITH_BAD_HASH: + case TRANS_RX_XRDY_WLEN_ZERO_ERR: + case TRANS_RX_SSP_FRM_LEN_ERR: + case SIPC_RX_FIS_STATUS_ERR_BIT_VLD: + case SIPC_RX_PIO_WRSETUP_STATUS_DRQ_ERR: + case SIPC_RX_FIS_STATUS_BSY_BIT_ERR: + case SIPC_RX_WRSETUP_LEN_ODD_ERR: + case SIPC_RX_WRSETUP_LEN_ZERO_ERR: + case SIPC_RX_WRDATA_LEN_NOT_MATCH_ERR: + case SIPC_RX_SATA_UNEXP_FIS_ERR: + case DMA_RX_SATA_FRAME_TYPE_ERR: + case DMA_RX_UNEXP_RDFRAME_ERR: + case DMA_RX_PIO_DATA_LEN_ERR: + case DMA_RX_RDSETUP_STATUS_ERR: + case DMA_RX_RDSETUP_STATUS_DRQ_ERR: + case DMA_RX_RDSETUP_STATUS_BSY_ERR: + case DMA_RX_RDSETUP_LEN_ODD_ERR: + case DMA_RX_RDSETUP_LEN_ZERO_ERR: + case DMA_RX_RDSETUP_LEN_OVER_ERR: + case DMA_RX_RDSETUP_OFFSET_ERR: + case DMA_RX_RDSETUP_ACTIVE_ERR: + case DMA_RX_RDSETUP_ESTATUS_ERR: + case DMA_RX_UNKNOWN_FRM_ERR: + { + ts->stat = SAS_OPEN_REJECT; + break; + } + default: + { + ts->stat = SAS_PROTO_RESPONSE; + break; + } + } + sata_done_v2_hw(hisi_hba, task, slot); + } + break; + default: + break; + } +} + +static int +slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot, + int abort) +{ + struct sas_task *task = slot->task; + struct hisi_sas_device *sas_dev; + struct device *dev = &hisi_hba->pdev->dev; + struct task_status_struct *ts; + struct domain_device *device; + enum exec_status sts; + struct hisi_sas_complete_v2_hdr *complete_queue = + hisi_hba->complete_hdr[slot->cmplt_queue]; + struct hisi_sas_complete_v2_hdr *complete_hdr = + &complete_queue[slot->cmplt_queue_slot]; + + if (unlikely(!task || !task->lldd_task || !task->dev)) + return -EINVAL; + + ts = &task->task_status; + device = task->dev; + sas_dev = device->lldd_dev; + + task->task_state_flags &= + ~(SAS_TASK_STATE_PENDING | SAS_TASK_AT_INITIATOR); + task->task_state_flags |= SAS_TASK_STATE_DONE; + + memset(ts, 0, sizeof(*ts)); + ts->resp = SAS_TASK_COMPLETE; + + if (unlikely(!sas_dev || abort)) { + if (!sas_dev) + dev_dbg(dev, "slot complete: port has not device\n"); + ts->stat = SAS_PHY_DOWN; + goto out; + } + + if ((complete_hdr->dw0 & CMPLT_HDR_ERX_MSK) && + (!(complete_hdr->dw0 & CMPLT_HDR_RSPNS_XFRD_MSK))) { + + slot_err_v2_hw(hisi_hba, task, slot); + if (unlikely(slot->abort)) { + queue_work(hisi_hba->wq, &slot->abort_slot); + /* immediately return and do not complete */ + return ts->stat; + } + goto out; + } + + switch (task->task_proto) { + case SAS_PROTOCOL_SSP: + { + struct ssp_response_iu *iu = slot->status_buffer + + sizeof(struct hisi_sas_err_record); + + sas_ssp_task_response(dev, task, iu); + break; + } + case SAS_PROTOCOL_SMP: + { + struct scatterlist *sg_resp = &task->smp_task.smp_resp; + void *to; + + ts->stat = SAM_STAT_GOOD; + to = kmap_atomic(sg_page(sg_resp)); + + dma_unmap_sg(dev, &task->smp_task.smp_resp, 1, + DMA_FROM_DEVICE); + dma_unmap_sg(dev, &task->smp_task.smp_req, 1, + DMA_TO_DEVICE); + memcpy(to + sg_resp->offset, + slot->status_buffer + + sizeof(struct hisi_sas_err_record), + sg_dma_len(sg_resp)); + kunmap_atomic(to); + break; + } + case SAS_PROTOCOL_SATA: + case SAS_PROTOCOL_STP: + case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: + { + ts->stat = SAM_STAT_GOOD; + sata_done_v2_hw(hisi_hba, task, slot); + break; + } + default: + ts->stat = SAM_STAT_CHECK_CONDITION; + break; + } + + if (!slot->port->port_attached) { + dev_err(dev, "slot complete: port %d has removed\n", + slot->port->sas_port.id); + ts->stat = SAS_PHY_DOWN; + } + +out: + if (sas_dev && sas_dev->running_req) + sas_dev->running_req--; + + hisi_sas_slot_task_free(hisi_hba, task, slot); + sts = ts->stat; + + if (task->task_done) + task->task_done(task); + + return sts; +} + +static u8 get_ata_protocol(u8 cmd, int direction) +{ + switch (cmd) { + case ATA_CMD_FPDMA_WRITE: + case ATA_CMD_FPDMA_READ: + return SATA_PROTOCOL_FPDMA; + + case ATA_CMD_ID_ATA: + case ATA_CMD_PMP_READ: + case ATA_CMD_READ_LOG_EXT: + case ATA_CMD_PIO_READ: + case ATA_CMD_PIO_READ_EXT: + case ATA_CMD_PMP_WRITE: + case ATA_CMD_WRITE_LOG_EXT: + case ATA_CMD_PIO_WRITE: + case ATA_CMD_PIO_WRITE_EXT: + return SATA_PROTOCOL_PIO; + + case ATA_CMD_READ: + case ATA_CMD_READ_EXT: + case ATA_CMD_READ_LOG_DMA_EXT: + case ATA_CMD_WRITE: + case ATA_CMD_WRITE_EXT: + case ATA_CMD_WRITE_QUEUED: + case ATA_CMD_WRITE_LOG_DMA_EXT: + return SATA_PROTOCOL_DMA; + + case ATA_CMD_DOWNLOAD_MICRO: + case ATA_CMD_DEV_RESET: + case ATA_CMD_CHK_POWER: + case ATA_CMD_FLUSH: + case ATA_CMD_FLUSH_EXT: + case ATA_CMD_VERIFY: + case ATA_CMD_VERIFY_EXT: + case ATA_CMD_SET_FEATURES: + case ATA_CMD_STANDBY: + case ATA_CMD_STANDBYNOW1: + return SATA_PROTOCOL_NONDATA; + default: + if (direction == DMA_NONE) + return SATA_PROTOCOL_NONDATA; + return SATA_PROTOCOL_PIO; + } +} + +static int get_ncq_tag_v2_hw(struct sas_task *task, u32 *tag) +{ + struct ata_queued_cmd *qc = task->uldd_task; + + if (qc) { + if (qc->tf.command == ATA_CMD_FPDMA_WRITE || + qc->tf.command == ATA_CMD_FPDMA_READ) { + *tag = qc->tag; + return 1; + } + } + return 0; +} + +static int prep_ata_v2_hw(struct hisi_hba *hisi_hba, + struct hisi_sas_slot *slot) +{ + struct sas_task *task = slot->task; + struct domain_device *device = task->dev; + struct domain_device *parent_dev = device->parent; + struct hisi_sas_device *sas_dev = device->lldd_dev; + struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr; + struct hisi_sas_port *port = device->port->lldd_port; + u8 *buf_cmd; + int has_data = 0, rc = 0, hdr_tag = 0; + u32 dw1 = 0, dw2 = 0; + + /* create header */ + /* dw0 */ + hdr->dw0 = cpu_to_le32(port->id << CMD_HDR_PORT_OFF); + if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) + hdr->dw0 |= cpu_to_le32(3 << CMD_HDR_CMD_OFF); + else + hdr->dw0 |= cpu_to_le32(4 << CMD_HDR_CMD_OFF); + + /* dw1 */ + switch (task->data_dir) { + case DMA_TO_DEVICE: + has_data = 1; + dw1 |= DIR_TO_DEVICE << CMD_HDR_DIR_OFF; + break; + case DMA_FROM_DEVICE: + has_data = 1; + dw1 |= DIR_TO_INI << CMD_HDR_DIR_OFF; + break; + default: + dw1 &= ~CMD_HDR_DIR_MSK; + } + + if (0 == task->ata_task.fis.command) + dw1 |= 1 << CMD_HDR_RESET_OFF; + + dw1 |= (get_ata_protocol(task->ata_task.fis.command, task->data_dir)) + << CMD_HDR_FRAME_TYPE_OFF; + dw1 |= sas_dev->device_id << CMD_HDR_DEV_ID_OFF; + hdr->dw1 = cpu_to_le32(dw1); + + /* dw2 */ + if (task->ata_task.use_ncq && get_ncq_tag_v2_hw(task, &hdr_tag)) { + task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3); + dw2 |= hdr_tag << CMD_HDR_NCQ_TAG_OFF; + } + + dw2 |= (HISI_SAS_MAX_STP_RESP_SZ / 4) << CMD_HDR_CFL_OFF | + 2 << CMD_HDR_SG_MOD_OFF; + hdr->dw2 = cpu_to_le32(dw2); + + /* dw3 */ + hdr->transfer_tags = cpu_to_le32(slot->idx); + + if (has_data) { + rc = prep_prd_sge_v2_hw(hisi_hba, slot, hdr, task->scatter, + slot->n_elem); + if (rc) + return rc; + } + + + hdr->data_transfer_len = cpu_to_le32(task->total_xfer_len); + hdr->cmd_table_addr = cpu_to_le64(slot->command_table_dma); + hdr->sts_buffer_addr = cpu_to_le64(slot->status_buffer_dma); + + buf_cmd = slot->command_table; + + if (likely(!task->ata_task.device_control_reg_update)) + task->ata_task.fis.flags |= 0x80; /* C=1: update ATA cmd reg */ + /* fill in command FIS */ + memcpy(buf_cmd, &task->ata_task.fis, sizeof(struct host_to_dev_fis)); + + return 0; +} + +static int phy_up_v2_hw(int phy_no, struct hisi_hba *hisi_hba) +{ + int i, res = 0; + u32 context, port_id, link_rate, hard_phy_linkrate; + struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no]; + struct asd_sas_phy *sas_phy = &phy->sas_phy; + struct device *dev = &hisi_hba->pdev->dev; + u32 *frame_rcvd = (u32 *)sas_phy->frame_rcvd; + struct sas_identify_frame *id = (struct sas_identify_frame *)frame_rcvd; + + hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_PHY_ENA_MSK, 1); + + /* Check for SATA dev */ + context = hisi_sas_read32(hisi_hba, PHY_CONTEXT); + if (context & (1 << phy_no)) + goto end; + + if (phy_no == 8) { + u32 port_state = hisi_sas_read32(hisi_hba, PORT_STATE); + + port_id = (port_state & PORT_STATE_PHY8_PORT_NUM_MSK) >> + PORT_STATE_PHY8_PORT_NUM_OFF; + link_rate = (port_state & PORT_STATE_PHY8_CONN_RATE_MSK) >> + PORT_STATE_PHY8_CONN_RATE_OFF; + } else { + port_id = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA); + port_id = (port_id >> (4 * phy_no)) & 0xf; + link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE); + link_rate = (link_rate >> (phy_no * 4)) & 0xf; + } + + if (port_id == 0xf) { + dev_err(dev, "phyup: phy%d invalid portid\n", phy_no); + res = IRQ_NONE; + goto end; + } + + for (i = 0; i < 6; i++) { + u32 idaf = hisi_sas_phy_read32(hisi_hba, phy_no, + RX_IDAF_DWORD0 + (i * 4)); + frame_rcvd[i] = __swab32(idaf); + } + + /* Get the linkrates */ + link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE); + link_rate = (link_rate >> (phy_no * 4)) & 0xf; + sas_phy->linkrate = link_rate; + hard_phy_linkrate = hisi_sas_phy_read32(hisi_hba, phy_no, + HARD_PHY_LINKRATE); + phy->maximum_linkrate = hard_phy_linkrate & 0xf; + phy->minimum_linkrate = (hard_phy_linkrate >> 4) & 0xf; + + sas_phy->oob_mode = SAS_OOB_MODE; + memcpy(sas_phy->attached_sas_addr, &id->sas_addr, SAS_ADDR_SIZE); + dev_info(dev, "phyup: phy%d link_rate=%d\n", phy_no, link_rate); + phy->port_id = port_id; + phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA); + phy->phy_type |= PORT_TYPE_SAS; + phy->phy_attached = 1; + phy->identify.device_type = id->dev_type; + phy->frame_rcvd_size = sizeof(struct sas_identify_frame); + if (phy->identify.device_type == SAS_END_DEVICE) + phy->identify.target_port_protocols = + SAS_PROTOCOL_SSP; + else if (phy->identify.device_type != SAS_PHY_UNUSED) + phy->identify.target_port_protocols = + SAS_PROTOCOL_SMP; + queue_work(hisi_hba->wq, &phy->phyup_ws); + +end: + hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, + CHL_INT0_SL_PHY_ENABLE_MSK); + hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_PHY_ENA_MSK, 0); + + return res; +} + +static int phy_down_v2_hw(int phy_no, struct hisi_hba *hisi_hba) +{ + int res = 0; + u32 phy_cfg, phy_state; + + hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_NOT_RDY_MSK, 1); + + phy_cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG); + + phy_state = hisi_sas_read32(hisi_hba, PHY_STATE); + + hisi_sas_phy_down(hisi_hba, phy_no, (phy_state & 1 << phy_no) ? 1 : 0); + + hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, CHL_INT0_NOT_RDY_MSK); + hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_NOT_RDY_MSK, 0); + + return res; +} + +static irqreturn_t int_phy_updown_v2_hw(int irq_no, void *p) +{ + struct hisi_hba *hisi_hba = p; + u32 irq_msk; + int phy_no = 0; + irqreturn_t res = IRQ_HANDLED; + + irq_msk = (hisi_sas_read32(hisi_hba, HGC_INVLD_DQE_INFO) + >> HGC_INVLD_DQE_INFO_FB_CH0_OFF) & 0x1ff; + while (irq_msk) { + if (irq_msk & 1) { + u32 irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, + CHL_INT0); + + if (irq_value & CHL_INT0_SL_PHY_ENABLE_MSK) + /* phy up */ + if (phy_up_v2_hw(phy_no, hisi_hba)) { + res = IRQ_NONE; + goto end; + } + + if (irq_value & CHL_INT0_NOT_RDY_MSK) + /* phy down */ + if (phy_down_v2_hw(phy_no, hisi_hba)) { + res = IRQ_NONE; + goto end; + } + } + irq_msk >>= 1; + phy_no++; + } + +end: + return res; +} + +static void phy_bcast_v2_hw(int phy_no, struct hisi_hba *hisi_hba) +{ + struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no]; + struct asd_sas_phy *sas_phy = &phy->sas_phy; + struct sas_ha_struct *sas_ha = &hisi_hba->sha; + unsigned long flags; + + hisi_sas_phy_write32(hisi_hba, phy_no, SL_RX_BCAST_CHK_MSK, 1); + + spin_lock_irqsave(&hisi_hba->lock, flags); + sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD); + spin_unlock_irqrestore(&hisi_hba->lock, flags); + + hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, + CHL_INT0_SL_RX_BCST_ACK_MSK); + hisi_sas_phy_write32(hisi_hba, phy_no, SL_RX_BCAST_CHK_MSK, 0); +} + +static irqreturn_t int_chnl_int_v2_hw(int irq_no, void *p) +{ + struct hisi_hba *hisi_hba = p; + struct device *dev = &hisi_hba->pdev->dev; + u32 ent_msk, ent_tmp, irq_msk; + int phy_no = 0; + + ent_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK3); + ent_tmp = ent_msk; + ent_msk |= ENT_INT_SRC_MSK3_ENT95_MSK_MSK; + hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, ent_msk); + + irq_msk = (hisi_sas_read32(hisi_hba, HGC_INVLD_DQE_INFO) >> + HGC_INVLD_DQE_INFO_FB_CH3_OFF) & 0x1ff; + + while (irq_msk) { + if (irq_msk & (1 << phy_no)) { + u32 irq_value0 = hisi_sas_phy_read32(hisi_hba, phy_no, + CHL_INT0); + u32 irq_value1 = hisi_sas_phy_read32(hisi_hba, phy_no, + CHL_INT1); + u32 irq_value2 = hisi_sas_phy_read32(hisi_hba, phy_no, + CHL_INT2); + + if (irq_value1) { + if (irq_value1 & (CHL_INT1_DMAC_RX_ECC_ERR_MSK | + CHL_INT1_DMAC_TX_ECC_ERR_MSK)) + panic("%s: DMAC RX/TX ecc bad error! (0x%x)", + dev_name(dev), irq_value1); + + hisi_sas_phy_write32(hisi_hba, phy_no, + CHL_INT1, irq_value1); + } + + if (irq_value2) + hisi_sas_phy_write32(hisi_hba, phy_no, + CHL_INT2, irq_value2); + + + if (irq_value0) { + if (irq_value0 & CHL_INT0_SL_RX_BCST_ACK_MSK) + phy_bcast_v2_hw(phy_no, hisi_hba); + + hisi_sas_phy_write32(hisi_hba, phy_no, + CHL_INT0, irq_value0 + & (~CHL_INT0_HOTPLUG_TOUT_MSK) + & (~CHL_INT0_SL_PHY_ENABLE_MSK) + & (~CHL_INT0_NOT_RDY_MSK)); + } + } + irq_msk &= ~(1 << phy_no); + phy_no++; + } + + hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, ent_tmp); + + return IRQ_HANDLED; +} + +static irqreturn_t cq_interrupt_v2_hw(int irq_no, void *p) +{ + struct hisi_sas_cq *cq = p; + struct hisi_hba *hisi_hba = cq->hisi_hba; + struct hisi_sas_slot *slot; + struct hisi_sas_itct *itct; + struct hisi_sas_complete_v2_hdr *complete_queue; + u32 irq_value, rd_point, wr_point, dev_id; + int queue = cq->id; + + complete_queue = hisi_hba->complete_hdr[queue]; + irq_value = hisi_sas_read32(hisi_hba, OQ_INT_SRC); + + hisi_sas_write32(hisi_hba, OQ_INT_SRC, 1 << queue); + + rd_point = hisi_sas_read32(hisi_hba, COMPL_Q_0_RD_PTR + + (0x14 * queue)); + wr_point = hisi_sas_read32(hisi_hba, COMPL_Q_0_WR_PTR + + (0x14 * queue)); + + while (rd_point != wr_point) { + struct hisi_sas_complete_v2_hdr *complete_hdr; + int iptt; + + complete_hdr = &complete_queue[rd_point]; + + /* Check for NCQ completion */ + if (complete_hdr->act) { + u32 act_tmp = complete_hdr->act; + int ncq_tag_count = ffs(act_tmp); + + dev_id = (complete_hdr->dw1 & CMPLT_HDR_DEV_ID_MSK) >> + CMPLT_HDR_DEV_ID_OFF; + itct = &hisi_hba->itct[dev_id]; + + /* The NCQ tags are held in the itct header */ + while (ncq_tag_count) { + __le64 *ncq_tag = &itct->qw4_15[0]; + + ncq_tag_count -= 1; + iptt = (ncq_tag[ncq_tag_count / 5] + >> (ncq_tag_count % 5) * 12) & 0xfff; + + slot = &hisi_hba->slot_info[iptt]; + slot->cmplt_queue_slot = rd_point; + slot->cmplt_queue = queue; + slot_complete_v2_hw(hisi_hba, slot, 0); + + act_tmp &= ~(1 << ncq_tag_count); + ncq_tag_count = ffs(act_tmp); + } + } else { + iptt = (complete_hdr->dw1) & CMPLT_HDR_IPTT_MSK; + slot = &hisi_hba->slot_info[iptt]; + slot->cmplt_queue_slot = rd_point; + slot->cmplt_queue = queue; + slot_complete_v2_hw(hisi_hba, slot, 0); + } + + if (++rd_point >= HISI_SAS_QUEUE_SLOTS) + rd_point = 0; + } + + /* update rd_point */ + hisi_sas_write32(hisi_hba, COMPL_Q_0_RD_PTR + (0x14 * queue), rd_point); + return IRQ_HANDLED; +} + +static irqreturn_t sata_int_v2_hw(int irq_no, void *p) +{ + struct hisi_sas_phy *phy = p; + struct hisi_hba *hisi_hba = phy->hisi_hba; + struct asd_sas_phy *sas_phy = &phy->sas_phy; + struct device *dev = &hisi_hba->pdev->dev; + struct hisi_sas_initial_fis *initial_fis; + struct dev_to_host_fis *fis; + u32 ent_tmp, ent_msk, ent_int, port_id, link_rate, hard_phy_linkrate; + irqreturn_t res = IRQ_HANDLED; + u8 attached_sas_addr[SAS_ADDR_SIZE] = {0}; + int phy_no; + + phy_no = sas_phy->id; + initial_fis = &hisi_hba->initial_fis[phy_no]; + fis = &initial_fis->fis; + + ent_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK1); + hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, ent_msk | 1 << phy_no); + + ent_int = hisi_sas_read32(hisi_hba, ENT_INT_SRC1); + ent_tmp = ent_int; + ent_int >>= ENT_INT_SRC1_D2H_FIS_CH1_OFF * (phy_no % 4); + if ((ent_int & ENT_INT_SRC1_D2H_FIS_CH0_MSK) == 0) { + dev_warn(dev, "sata int: phy%d did not receive FIS\n", phy_no); + hisi_sas_write32(hisi_hba, ENT_INT_SRC1, ent_tmp); + hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, ent_msk); + res = IRQ_NONE; + goto end; + } + + if (unlikely(phy_no == 8)) { + u32 port_state = hisi_sas_read32(hisi_hba, PORT_STATE); + + port_id = (port_state & PORT_STATE_PHY8_PORT_NUM_MSK) >> + PORT_STATE_PHY8_PORT_NUM_OFF; + link_rate = (port_state & PORT_STATE_PHY8_CONN_RATE_MSK) >> + PORT_STATE_PHY8_CONN_RATE_OFF; + } else { + port_id = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA); + port_id = (port_id >> (4 * phy_no)) & 0xf; + link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE); + link_rate = (link_rate >> (phy_no * 4)) & 0xf; + } + + if (port_id == 0xf) { + dev_err(dev, "sata int: phy%d invalid portid\n", phy_no); + res = IRQ_NONE; + goto end; + } + + sas_phy->linkrate = link_rate; + hard_phy_linkrate = hisi_sas_phy_read32(hisi_hba, phy_no, + HARD_PHY_LINKRATE); + phy->maximum_linkrate = hard_phy_linkrate & 0xf; + phy->minimum_linkrate = (hard_phy_linkrate >> 4) & 0xf; + + sas_phy->oob_mode = SATA_OOB_MODE; + /* Make up some unique SAS address */ + attached_sas_addr[0] = 0x50; + attached_sas_addr[7] = phy_no; + memcpy(sas_phy->attached_sas_addr, attached_sas_addr, SAS_ADDR_SIZE); + memcpy(sas_phy->frame_rcvd, fis, sizeof(struct dev_to_host_fis)); + dev_info(dev, "sata int phyup: phy%d link_rate=%d\n", phy_no, link_rate); + phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA); + phy->port_id = port_id; + phy->phy_type |= PORT_TYPE_SATA; + phy->phy_attached = 1; + phy->identify.device_type = SAS_SATA_DEV; + phy->frame_rcvd_size = sizeof(struct dev_to_host_fis); + phy->identify.target_port_protocols = SAS_PROTOCOL_SATA; + queue_work(hisi_hba->wq, &phy->phyup_ws); + +end: + hisi_sas_write32(hisi_hba, ENT_INT_SRC1, ent_tmp); + hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, ent_msk); + + return res; +} + +static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = { + int_phy_updown_v2_hw, + int_chnl_int_v2_hw, +}; + +/** + * There is a limitation in the hip06 chipset that we need + * to map in all mbigen interrupts, even if they are not used. + */ +static int interrupt_init_v2_hw(struct hisi_hba *hisi_hba) +{ + struct platform_device *pdev = hisi_hba->pdev; + struct device *dev = &pdev->dev; + int i, irq, rc, irq_map[128]; + + + for (i = 0; i < 128; i++) + irq_map[i] = platform_get_irq(pdev, i); + + for (i = 0; i < HISI_SAS_PHY_INT_NR; i++) { + int idx = i; + + irq = irq_map[idx + 1]; /* Phy up/down is irq1 */ + if (!irq) { + dev_err(dev, "irq init: fail map phy interrupt %d\n", + idx); + return -ENOENT; + } + + rc = devm_request_irq(dev, irq, phy_interrupts[i], 0, + DRV_NAME " phy", hisi_hba); + if (rc) { + dev_err(dev, "irq init: could not request " + "phy interrupt %d, rc=%d\n", + irq, rc); + return -ENOENT; + } + } + + for (i = 0; i < hisi_hba->n_phy; i++) { + struct hisi_sas_phy *phy = &hisi_hba->phy[i]; + int idx = i + 72; /* First SATA interrupt is irq72 */ + + irq = irq_map[idx]; + if (!irq) { + dev_err(dev, "irq init: fail map phy interrupt %d\n", + idx); + return -ENOENT; + } + + rc = devm_request_irq(dev, irq, sata_int_v2_hw, 0, + DRV_NAME " sata", phy); + if (rc) { + dev_err(dev, "irq init: could not request " + "sata interrupt %d, rc=%d\n", + irq, rc); + return -ENOENT; + } + } + + for (i = 0; i < hisi_hba->queue_count; i++) { + int idx = i + 96; /* First cq interrupt is irq96 */ + + irq = irq_map[idx]; + if (!irq) { + dev_err(dev, + "irq init: could not map cq interrupt %d\n", + idx); + return -ENOENT; + } + rc = devm_request_irq(dev, irq, cq_interrupt_v2_hw, 0, + DRV_NAME " cq", &hisi_hba->cq[i]); + if (rc) { + dev_err(dev, + "irq init: could not request cq interrupt %d, rc=%d\n", + irq, rc); + return -ENOENT; + } + } + + return 0; +} + +static int hisi_sas_v2_init(struct hisi_hba *hisi_hba) +{ + int rc; + + rc = hw_init_v2_hw(hisi_hba); + if (rc) + return rc; + + rc = interrupt_init_v2_hw(hisi_hba); + if (rc) + return rc; + + phys_init_v2_hw(hisi_hba); + + return 0; +} + +static const struct hisi_sas_hw hisi_sas_v2_hw = { + .hw_init = hisi_sas_v2_init, + .setup_itct = setup_itct_v2_hw, + .sl_notify = sl_notify_v2_hw, + .get_wideport_bitmap = get_wideport_bitmap_v2_hw, + .free_device = free_device_v2_hw, + .prep_smp = prep_smp_v2_hw, + .prep_ssp = prep_ssp_v2_hw, + .prep_stp = prep_ata_v2_hw, + .get_free_slot = get_free_slot_v2_hw, + .start_delivery = start_delivery_v2_hw, + .slot_complete = slot_complete_v2_hw, + .phy_enable = enable_phy_v2_hw, + .phy_disable = disable_phy_v2_hw, + .phy_hard_reset = phy_hard_reset_v2_hw, + .max_command_entries = HISI_SAS_COMMAND_ENTRIES_V2_HW, + .complete_hdr_size = sizeof(struct hisi_sas_complete_v2_hdr), +}; + +static int hisi_sas_v2_probe(struct platform_device *pdev) +{ + return hisi_sas_probe(pdev, &hisi_sas_v2_hw); +} + +static int hisi_sas_v2_remove(struct platform_device *pdev) +{ + return hisi_sas_remove(pdev); +} + +static const struct of_device_id sas_v2_of_match[] = { + { .compatible = "hisilicon,hip06-sas-v2",}, + {}, +}; +MODULE_DEVICE_TABLE(of, sas_v2_of_match); + +static struct platform_driver hisi_sas_v2_driver = { + .probe = hisi_sas_v2_probe, + .remove = hisi_sas_v2_remove, + .driver = { + .name = DRV_NAME, + .of_match_table = sas_v2_of_match, + }, +}; + +module_platform_driver(hisi_sas_v2_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("John Garry <john.garry@huawei.com>"); +MODULE_DESCRIPTION("HISILICON SAS controller v2 hw driver"); +MODULE_ALIAS("platform:" DRV_NAME); |