diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_attr.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_attr.c | 266 |
1 files changed, 246 insertions, 20 deletions
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index e1a30a16a9fa..91542f786edf 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -23,12 +23,14 @@ #include <linux/delay.h> #include <linux/pci.h> #include <linux/interrupt.h> +#include <linux/aer.h> #include <scsi/scsi.h> #include <scsi/scsi_device.h> #include <scsi/scsi_host.h> #include <scsi/scsi_tcq.h> #include <scsi/scsi_transport_fc.h> +#include <scsi/fc/fc_fs.h> #include "lpfc_hw4.h" #include "lpfc_hw.h" @@ -98,6 +100,28 @@ lpfc_drvr_version_show(struct device *dev, struct device_attribute *attr, return snprintf(buf, PAGE_SIZE, LPFC_MODULE_DESC "\n"); } +/** + * lpfc_enable_fip_show - Return the fip mode of the HBA + * @dev: class unused variable. + * @attr: device attribute, not used. + * @buf: on return contains the module description text. + * + * Returns: size of formatted string. + **/ +static ssize_t +lpfc_enable_fip_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + + if (phba->hba_flag & HBA_FIP_SUPPORT) + return snprintf(buf, PAGE_SIZE, "1\n"); + else + return snprintf(buf, PAGE_SIZE, "0\n"); +} + static ssize_t lpfc_bg_info_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -654,7 +678,7 @@ lpfc_selective_reset(struct lpfc_hba *phba) * Notes: * Assumes any error from lpfc_selective_reset() will be negative. * If lpfc_selective_reset() returns zero then the length of the buffer - * is returned which indicates succcess + * is returned which indicates success * * Returns: * -EINVAL if the buffer does not contain the string "selective" @@ -762,9 +786,15 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr, } else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0) status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); else if (strncmp(buf, "warm", sizeof("warm") - 1) == 0) - status = lpfc_do_offline(phba, LPFC_EVT_WARM_START); + if (phba->sli_rev == LPFC_SLI_REV4) + return -EINVAL; + else + status = lpfc_do_offline(phba, LPFC_EVT_WARM_START); else if (strncmp(buf, "error", sizeof("error") - 1) == 0) - status = lpfc_do_offline(phba, LPFC_EVT_KILL); + if (phba->sli_rev == LPFC_SLI_REV4) + return -EINVAL; + else + status = lpfc_do_offline(phba, LPFC_EVT_KILL); else return -EINVAL; @@ -1126,6 +1156,9 @@ lpfc_poll_store(struct device *dev, struct device_attribute *attr, if ((val & 0x3) != val) return -EINVAL; + if (phba->sli_rev == LPFC_SLI_REV4) + val = 0; + spin_lock_irq(&phba->hbalock); old_val = phba->cfg_poll; @@ -1589,6 +1622,7 @@ static DEVICE_ATTR(num_discovered_ports, S_IRUGO, static DEVICE_ATTR(menlo_mgmt_mode, S_IRUGO, lpfc_mlomgmt_show, NULL); static DEVICE_ATTR(nport_evt_cnt, S_IRUGO, lpfc_nport_evt_cnt_show, NULL); static DEVICE_ATTR(lpfc_drvr_version, S_IRUGO, lpfc_drvr_version_show, NULL); +static DEVICE_ATTR(lpfc_enable_fip, S_IRUGO, lpfc_enable_fip_show, NULL); static DEVICE_ATTR(board_mode, S_IRUGO | S_IWUSR, lpfc_board_mode_show, lpfc_board_mode_store); static DEVICE_ATTR(issue_reset, S_IWUSR, NULL, lpfc_issue_reset); @@ -2759,6 +2793,196 @@ static DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR, lpfc_link_speed_show, lpfc_link_speed_store); /* +# lpfc_aer_support: Support PCIe device Advanced Error Reporting (AER) +# 0 = aer disabled or not supported +# 1 = aer supported and enabled (default) +# Value range is [0,1]. Default value is 1. +*/ + +/** + * lpfc_aer_support_store - Set the adapter for aer support + * + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: containing the string "selective". + * @count: unused variable. + * + * Description: + * If the val is 1 and currently the device's AER capability was not + * enabled, invoke the kernel's enable AER helper routine, trying to + * enable the device's AER capability. If the helper routine enabling + * AER returns success, update the device's cfg_aer_support flag to + * indicate AER is supported by the device; otherwise, if the device + * AER capability is already enabled to support AER, then do nothing. + * + * If the val is 0 and currently the device's AER support was enabled, + * invoke the kernel's disable AER helper routine. After that, update + * the device's cfg_aer_support flag to indicate AER is not supported + * by the device; otherwise, if the device AER capability is already + * disabled from supporting AER, then do nothing. + * + * Returns: + * length of the buf on success if val is in range the intended mode + * is supported. + * -EINVAL if val out of range or intended mode is not supported. + **/ +static ssize_t +lpfc_aer_support_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int val = 0, rc = -EINVAL; + + /* AER not supported on OC devices yet */ + if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) + return -EPERM; + if (!isdigit(buf[0])) + return -EINVAL; + if (sscanf(buf, "%i", &val) != 1) + return -EINVAL; + + switch (val) { + case 0: + if (phba->hba_flag & HBA_AER_ENABLED) { + rc = pci_disable_pcie_error_reporting(phba->pcidev); + if (!rc) { + spin_lock_irq(&phba->hbalock); + phba->hba_flag &= ~HBA_AER_ENABLED; + spin_unlock_irq(&phba->hbalock); + phba->cfg_aer_support = 0; + rc = strlen(buf); + } else + rc = -EPERM; + } else { + phba->cfg_aer_support = 0; + rc = strlen(buf); + } + break; + case 1: + if (!(phba->hba_flag & HBA_AER_ENABLED)) { + rc = pci_enable_pcie_error_reporting(phba->pcidev); + if (!rc) { + spin_lock_irq(&phba->hbalock); + phba->hba_flag |= HBA_AER_ENABLED; + spin_unlock_irq(&phba->hbalock); + phba->cfg_aer_support = 1; + rc = strlen(buf); + } else + rc = -EPERM; + } else { + phba->cfg_aer_support = 1; + rc = strlen(buf); + } + break; + default: + rc = -EINVAL; + break; + } + return rc; +} + +static int lpfc_aer_support = 1; +module_param(lpfc_aer_support, int, 1); +MODULE_PARM_DESC(lpfc_aer_support, "Enable PCIe device AER support"); +lpfc_param_show(aer_support) + +/** + * lpfc_aer_support_init - Set the initial adapters aer support flag + * @phba: lpfc_hba pointer. + * @val: link speed value. + * + * Description: + * If val is in a valid range [0,1], then set the adapter's initial + * cfg_aer_support field. It will be up to the driver's probe_one + * routine to determine whether the device's AER support can be set + * or not. + * + * Notes: + * If the value is not in range log a kernel error message, and + * choose the default value of setting AER support and return. + * + * Returns: + * zero if val saved. + * -EINVAL val out of range + **/ +static int +lpfc_aer_support_init(struct lpfc_hba *phba, int val) +{ + /* AER not supported on OC devices yet */ + if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) { + phba->cfg_aer_support = 0; + return -EPERM; + } + + if (val == 0 || val == 1) { + phba->cfg_aer_support = val; + return 0; + } + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2712 lpfc_aer_support attribute value %d out " + "of range, allowed values are 0|1, setting it " + "to default value of 1\n", val); + /* By default, try to enable AER on a device */ + phba->cfg_aer_support = 1; + return -EINVAL; +} + +static DEVICE_ATTR(lpfc_aer_support, S_IRUGO | S_IWUSR, + lpfc_aer_support_show, lpfc_aer_support_store); + +/** + * lpfc_aer_cleanup_state - Clean up aer state to the aer enabled device + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: containing the string "selective". + * @count: unused variable. + * + * Description: + * If the @buf contains 1 and the device currently has the AER support + * enabled, then invokes the kernel AER helper routine + * pci_cleanup_aer_uncorrect_error_status to clean up the uncorrectable + * error status register. + * + * Notes: + * + * Returns: + * -EINVAL if the buf does not contain the 1 or the device is not currently + * enabled with the AER support. + **/ +static ssize_t +lpfc_aer_cleanup_state(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int val, rc = -1; + + /* AER not supported on OC devices yet */ + if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) + return -EPERM; + if (!isdigit(buf[0])) + return -EINVAL; + if (sscanf(buf, "%i", &val) != 1) + return -EINVAL; + if (val != 1) + return -EINVAL; + + if (phba->hba_flag & HBA_AER_ENABLED) + rc = pci_cleanup_aer_uncorrect_error_status(phba->pcidev); + + if (rc == 0) + return strlen(buf); + else + return -EPERM; +} + +static DEVICE_ATTR(lpfc_aer_state_cleanup, S_IWUSR, NULL, + lpfc_aer_cleanup_state); + +/* # lpfc_fcp_class: Determines FC class to use for the FCP protocol. # Value range is [2,3]. Default value is 3. */ @@ -2846,7 +3070,7 @@ LPFC_ATTR_R(multi_ring_support, 1, 1, 2, "Determines number of primary " # identifies what rctl value to configure the additional ring for. # Value range is [1,0xff]. Default value is 4 (Unsolicated Data). */ -LPFC_ATTR_R(multi_ring_rctl, FC_UNSOL_DATA, 1, +LPFC_ATTR_R(multi_ring_rctl, FC_RCTL_DD_UNSOL_DATA, 1, 255, "Identifies RCTL for additional ring configuration"); /* @@ -2854,7 +3078,7 @@ LPFC_ATTR_R(multi_ring_rctl, FC_UNSOL_DATA, 1, # identifies what type value to configure the additional ring for. # Value range is [1,0xff]. Default value is 5 (LLC/SNAP). */ -LPFC_ATTR_R(multi_ring_type, FC_LLC_SNAP, 1, +LPFC_ATTR_R(multi_ring_type, FC_TYPE_IP, 1, 255, "Identifies TYPE for additional ring configuration"); /* @@ -2947,15 +3171,6 @@ LPFC_ATTR_R(enable_hba_heartbeat, 1, 0, 1, "Enable HBA Heartbeat."); LPFC_ATTR_R(enable_bg, 0, 0, 1, "Enable BlockGuard Support"); /* -# lpfc_enable_fip: When set, FIP is required to start discovery. If not -# set, the driver will add an FCF record manually if the port has no -# FCF records available and start discovery. -# Value range is [0,1]. Default value is 1 (enabled) -*/ -LPFC_ATTR_RW(enable_fip, 0, 0, 1, "Enable FIP Discovery"); - - -/* # lpfc_prot_mask: i # - Bit mask of host protection capabilities used to register with the # SCSI mid-layer @@ -3013,6 +3228,7 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_num_discovered_ports, &dev_attr_menlo_mgmt_mode, &dev_attr_lpfc_drvr_version, + &dev_attr_lpfc_enable_fip, &dev_attr_lpfc_temp_sensor, &dev_attr_lpfc_log_verbose, &dev_attr_lpfc_lun_queue_depth, @@ -3020,7 +3236,6 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_peer_port_login, &dev_attr_lpfc_nodev_tmo, &dev_attr_lpfc_devloss_tmo, - &dev_attr_lpfc_enable_fip, &dev_attr_lpfc_fcp_class, &dev_attr_lpfc_use_adisc, &dev_attr_lpfc_ack0, @@ -3061,6 +3276,8 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_max_scsicmpl_time, &dev_attr_lpfc_stat_data_ctrl, &dev_attr_lpfc_prot_sg_seg_cnt, + &dev_attr_lpfc_aer_support, + &dev_attr_lpfc_aer_state_cleanup, NULL, }; @@ -3073,7 +3290,6 @@ struct device_attribute *lpfc_vport_attrs[] = { &dev_attr_lpfc_lun_queue_depth, &dev_attr_lpfc_nodev_tmo, &dev_attr_lpfc_devloss_tmo, - &dev_attr_lpfc_enable_fip, &dev_attr_lpfc_hba_queue_depth, &dev_attr_lpfc_peer_port_login, &dev_attr_lpfc_restrict_login, @@ -3147,7 +3363,7 @@ sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr, * sysfs_ctlreg_read - Read method for reading from ctlreg * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. - * @buf: if succesful contains the data from the adapter IOREG space. + * @buf: if successful contains the data from the adapter IOREG space. * @off: offset into buffer to beginning of data. * @count: bytes to transfer. * @@ -3815,7 +4031,11 @@ lpfc_get_stats(struct Scsi_Host *shost) hs->invalid_crc_count -= lso->invalid_crc_count; hs->error_frames -= lso->error_frames; - if (phba->fc_topology == TOPOLOGY_LOOP) { + if (phba->hba_flag & HBA_FCOE_SUPPORT) { + hs->lip_count = -1; + hs->nos_count = (phba->link_events >> 1); + hs->nos_count -= lso->link_events; + } else if (phba->fc_topology == TOPOLOGY_LOOP) { hs->lip_count = (phba->fc_eventTag >> 1); hs->lip_count -= lso->link_events; hs->nos_count = -1; @@ -3906,7 +4126,10 @@ lpfc_reset_stats(struct Scsi_Host *shost) lso->invalid_tx_word_count = pmb->un.varRdLnk.invalidXmitWord; lso->invalid_crc_count = pmb->un.varRdLnk.crcCnt; lso->error_frames = pmb->un.varRdLnk.crcCnt; - lso->link_events = (phba->fc_eventTag >> 1); + if (phba->hba_flag & HBA_FCOE_SUPPORT) + lso->link_events = (phba->link_events >> 1); + else + lso->link_events = (phba->fc_eventTag >> 1); psli->stats_start = get_seconds(); @@ -4222,14 +4445,17 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset); lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat); lpfc_enable_bg_init(phba, lpfc_enable_bg); + if (phba->sli_rev == LPFC_SLI_REV4) + phba->cfg_poll = 0; + else phba->cfg_poll = lpfc_poll; phba->cfg_soft_wwnn = 0L; phba->cfg_soft_wwpn = 0L; lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt); lpfc_prot_sg_seg_cnt_init(phba, lpfc_prot_sg_seg_cnt); lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth); - lpfc_enable_fip_init(phba, lpfc_enable_fip); lpfc_hba_log_verbose_init(phba, lpfc_log_verbose); + lpfc_aer_support_init(phba, lpfc_aer_support); return; } |