diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_attr.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_attr.c | 48 |
1 files changed, 33 insertions, 15 deletions
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index f6446d759d7f..343ae9482891 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -4572,19 +4572,27 @@ LPFC_ATTR_R(multi_ring_type, FC_TYPE_IP, 1, 255, "Identifies TYPE for additional ring configuration"); /* -# lpfc_fdmi_on: controls FDMI support. -# Set NOT Set -# bit 0 = FDMI support no FDMI support -# LPFC_FDMI_SUPPORT just turns basic support on/off -# bit 1 = Register delay no register delay (60 seconds) -# LPFC_FDMI_REG_DELAY 60 sec registration delay after FDMI login -# bit 2 = All attributes Use a attribute subset -# LPFC_FDMI_ALL_ATTRIB applies to both port and HBA attributes -# Port attrutes subset: 1 thru 6 OR all: 1 thru 0xd 0x101 0x102 0x103 -# HBA attributes subset: 1 thru 0xb OR all: 1 thru 0xc -# Value range [0,7]. Default value is 0. +# lpfc_enable_SmartSAN: Sets up FDMI support for SmartSAN +# 0 = SmartSAN functionality disabled (default) +# 1 = SmartSAN functionality enabled +# This parameter will override the value of lpfc_fdmi_on module parameter. +# Value range is [0,1]. Default value is 0. */ -LPFC_VPORT_ATTR_RW(fdmi_on, 0, 0, 7, "Enable FDMI support"); +LPFC_ATTR_R(enable_SmartSAN, 0, 0, 1, "Enable SmartSAN functionality"); + +/* +# lpfc_fdmi_on: Controls FDMI support. +# 0 No FDMI support (default) +# 1 Traditional FDMI support +# 2 Smart SAN support +# If lpfc_enable_SmartSAN is set 1, the driver sets lpfc_fdmi_on to value 2 +# overwriting the current value. If lpfc_enable_SmartSAN is set 0, the +# driver uses the current value of lpfc_fdmi_on provided it has value 0 or 1. +# A value of 2 with lpfc_enable_SmartSAN set to 0 causes the driver to +# set lpfc_fdmi_on back to 1. +# Value range [0,2]. Default value is 0. +*/ +LPFC_ATTR_R(fdmi_on, 0, 0, 2, "Enable FDMI support"); /* # Specifies the maximum number of ELS cmds we can have outstanding (for @@ -4815,6 +4823,7 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_multi_ring_rctl, &dev_attr_lpfc_multi_ring_type, &dev_attr_lpfc_fdmi_on, + &dev_attr_lpfc_enable_SmartSAN, &dev_attr_lpfc_max_luns, &dev_attr_lpfc_enable_npiv, &dev_attr_lpfc_fcf_failover_policy, @@ -4887,7 +4896,6 @@ struct device_attribute *lpfc_vport_attrs[] = { &dev_attr_lpfc_fcp_class, &dev_attr_lpfc_use_adisc, &dev_attr_lpfc_first_burst_size, - &dev_attr_lpfc_fdmi_on, &dev_attr_lpfc_max_luns, &dev_attr_nport_evt_cnt, &dev_attr_npiv_info, @@ -5247,7 +5255,7 @@ lpfc_get_host_speed(struct Scsi_Host *shost) spin_lock_irq(shost->host_lock); - if (lpfc_is_link_up(phba)) { + if ((lpfc_is_link_up(phba)) && (!(phba->hba_flag & HBA_FCOE_MODE))) { switch(phba->fc_linkspeed) { case LPFC_LINK_SPEED_1GHZ: fc_host_speed(shost) = FC_PORTSPEED_1GBIT; @@ -5826,6 +5834,8 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_enable_npiv_init(phba, lpfc_enable_npiv); lpfc_fcf_failover_policy_init(phba, lpfc_fcf_failover_policy); lpfc_enable_rrq_init(phba, lpfc_enable_rrq); + lpfc_fdmi_on_init(phba, lpfc_fdmi_on); + lpfc_enable_SmartSAN_init(phba, lpfc_enable_SmartSAN); lpfc_use_msi_init(phba, lpfc_use_msi); lpfc_fcp_imax_init(phba, lpfc_fcp_imax); lpfc_fcp_cpu_map_init(phba, lpfc_fcp_cpu_map); @@ -5846,6 +5856,15 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) phba->cfg_poll = 0; else phba->cfg_poll = lpfc_poll; + + /* Ensure fdmi_on and enable_SmartSAN don't conflict */ + if (phba->cfg_enable_SmartSAN) { + phba->cfg_fdmi_on = LPFC_FDMI_SMART_SAN; + } else { + if (phba->cfg_fdmi_on == LPFC_FDMI_SMART_SAN) + phba->cfg_fdmi_on = LPFC_FDMI_SUPPORT; + } + phba->cfg_soft_wwnn = 0L; phba->cfg_soft_wwpn = 0L; lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt); @@ -5879,7 +5898,6 @@ lpfc_get_vport_cfgparam(struct lpfc_vport *vport) lpfc_use_adisc_init(vport, lpfc_use_adisc); lpfc_first_burst_size_init(vport, lpfc_first_burst_size); lpfc_max_scsicmpl_time_init(vport, lpfc_max_scsicmpl_time); - lpfc_fdmi_on_init(vport, lpfc_fdmi_on); lpfc_discovery_threads_init(vport, lpfc_discovery_threads); lpfc_max_luns_init(vport, lpfc_max_luns); lpfc_scan_down_init(vport, lpfc_scan_down); |