diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 117 |
1 files changed, 109 insertions, 8 deletions
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h index d7598cc4bb8e..cf510ed91924 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2014 LSI Corporation. + * Copyright 2000-2015 Avago Technologies. All rights reserved. * * * Name: mpi2_ioc.h * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: October 11, 2006 * - * mpi2_ioc.h Version: 02.00.24 + * mpi2_ioc.h Version: 02.00.26 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -133,6 +133,10 @@ * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY. * Added Encrypted Hash Extended Image. * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS. + * 11-18-14 02.00.25 Updated copyright information. + * 03-16-15 02.00.26 Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and + * MPI26_FW_HEADER_PID_FAMILY_3516_SAS. + * Added MPI26_CTRL_OP_SHUTDOWN. * -------------------------------------------------------------------------- */ @@ -165,7 +169,7 @@ typedef struct _MPI2_IOC_INIT_REQUEST { U16 HeaderVersion; /*0x0E */ U32 Reserved5; /*0x10 */ U16 Reserved6; /*0x14 */ - U8 Reserved7; /*0x16 */ + U8 HostPageSize; /*0x16 */ U8 HostMSIxVectors; /*0x17 */ U16 Reserved8; /*0x18 */ U16 SystemRequestFrameSize; /*0x1A */ @@ -289,7 +293,8 @@ typedef struct _MPI2_IOC_FACTS_REPLY { U16 MaxDevHandle; /*0x38 */ U16 MaxPersistentEntries; /*0x3A */ U16 MinDevHandle; /*0x3C */ - U16 Reserved4; /*0x3E */ + U8 CurrentHostPageSize; /* 0x3E */ + U8 Reserved4; /* 0x3F */ } MPI2_IOC_FACTS_REPLY, *PTR_MPI2_IOC_FACTS_REPLY, Mpi2IOCFactsReply_t, *pMpi2IOCFactsReply_t; @@ -326,6 +331,7 @@ typedef struct _MPI2_IOC_FACTS_REPLY { /*ProductID field uses MPI2_FW_HEADER_PID_ */ /*IOCCapabilities */ +#define MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ (0x00080000) #define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE (0x00040000) #define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE (0x00020000) #define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000) @@ -343,8 +349,8 @@ typedef struct _MPI2_IOC_FACTS_REPLY { #define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004) /*ProtocolFlags */ -#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) #define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002) +#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) /**************************************************************************** * PortFacts message @@ -1247,6 +1253,7 @@ typedef struct _MPI2_FW_UPLOAD_REQUEST { #define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09) #define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A) #define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) +#define MPI2_FW_UPLOAD_ITYPE_CBB_BACKUP (0x0D) /*MPI v2.0 FWUpload TransactionContext Element */ typedef struct _MPI2_FW_UPLOAD_TCSGE { @@ -1328,7 +1335,7 @@ typedef struct _MPI2_FW_IMAGE_HEADER { U32 Reserved54; /*0x54 */ U32 Reserved58; /*0x58 */ U32 Reserved5C; /*0x5C */ - U32 Reserved60; /*0x60 */ + U32 BootFlags; /*0x60 */ U32 FirmwareVersionNameWhat; /*0x64 */ U8 FirmwareVersionName[32]; /*0x68 */ U32 VendorNameWhat; /*0x88 */ @@ -1354,18 +1361,22 @@ typedef struct _MPI2_FW_IMAGE_HEADER { #define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00) #define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000) #define MPI2_FW_HEADER_SIGNATURE (0xEA000000) +#define MPI26_FW_HEADER_SIGNATURE (0xEB000000) /*Signature0 field */ #define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04) #define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A) +#define MPI26_FW_HEADER_SIGNATURE0 (0x5AEAA55A) /*Signature1 field */ #define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08) #define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5) +#define MPI26_FW_HEADER_SIGNATURE1 (0xA55AEAA5) /*Signature2 field */ #define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C) #define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA) +#define MPI26_FW_HEADER_SIGNATURE2 (0x5AA55AEA) /*defines for using the ProductID field */ #define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000) @@ -1381,6 +1392,8 @@ typedef struct _MPI2_FW_IMAGE_HEADER { #define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013) #define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014) #define MPI25_FW_HEADER_PID_FAMILY_3108_SAS (0x0021) +#define MPI26_FW_HEADER_PID_FAMILY_3324_SAS (0x0028) +#define MPI26_FW_HEADER_PID_FAMILY_3516_SAS (0x0031) /*use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */ @@ -1388,6 +1401,7 @@ typedef struct _MPI2_FW_IMAGE_HEADER { #define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C) #define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30) +#define MPI26_FW_HEADER_BOOTFLAGS_OFFSET (0x60) #define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64) #define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840) @@ -1493,7 +1507,9 @@ typedef struct _MPI2_FLASH_LAYOUT_DATA { #define MPI2_FLASH_REGION_CONFIG_1 (0x07) #define MPI2_FLASH_REGION_CONFIG_2 (0x08) #define MPI2_FLASH_REGION_MEGARAID (0x09) -#define MPI2_FLASH_REGION_INIT (0x0A) +#define MPI2_FLASH_REGION_COMMON_BOOT_BLOCK (0x0A) +#define MPI2_FLASH_REGION_INIT (MPI2_FLASH_REGION_COMMON_BOOT_BLOCK) +#define MPI2_FLASH_REGION_CBB_BACKUP (0x0D) /*ImageRevision */ #define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00) @@ -1619,7 +1635,6 @@ typedef struct _MPI25_ENCRYPTED_HASH_DATA { Mpi25EncryptedHashData_t, *pMpi25EncryptedHashData_t; - /**************************************************************************** * PowerManagementControl message ****************************************************************************/ @@ -1726,4 +1741,90 @@ typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY { } MPI2_PWR_MGMT_CONTROL_REPLY, *PTR_MPI2_PWR_MGMT_CONTROL_REPLY, Mpi2PwrMgmtControlReply_t, *pMpi2PwrMgmtControlReply_t; +/**************************************************************************** +* IO Unit Control messages (MPI v2.6 and later only.) +****************************************************************************/ + +/* IO Unit Control Request Message */ +typedef struct _MPI26_IOUNIT_CONTROL_REQUEST { + U8 Operation; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 DevHandle; /* 0x04 */ + U8 IOCParameter; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U16 Reserved4; /* 0x0C */ + U8 PhyNum; /* 0x0E */ + U8 PrimFlags; /* 0x0F */ + U32 Primitive; /* 0x10 */ + U8 LookupMethod; /* 0x14 */ + U8 Reserved5; /* 0x15 */ + U16 SlotNumber; /* 0x16 */ + U64 LookupAddress; /* 0x18 */ + U32 IOCParameterValue; /* 0x20 */ + U32 Reserved7; /* 0x24 */ + U32 Reserved8; /* 0x28 */ +} MPI26_IOUNIT_CONTROL_REQUEST, + *PTR_MPI26_IOUNIT_CONTROL_REQUEST, + Mpi26IoUnitControlRequest_t, + *pMpi26IoUnitControlRequest_t; + +/* values for the Operation field */ +#define MPI26_CTRL_OP_CLEAR_ALL_PERSISTENT (0x02) +#define MPI26_CTRL_OP_SAS_PHY_LINK_RESET (0x06) +#define MPI26_CTRL_OP_SAS_PHY_HARD_RESET (0x07) +#define MPI26_CTRL_OP_PHY_CLEAR_ERROR_LOG (0x08) +#define MPI26_CTRL_OP_SAS_SEND_PRIMITIVE (0x0A) +#define MPI26_CTRL_OP_FORCE_FULL_DISCOVERY (0x0B) +#define MPI26_CTRL_OP_REMOVE_DEVICE (0x0D) +#define MPI26_CTRL_OP_LOOKUP_MAPPING (0x0E) +#define MPI26_CTRL_OP_SET_IOC_PARAMETER (0x0F) +#define MPI26_CTRL_OP_ENABLE_FP_DEVICE (0x10) +#define MPI26_CTRL_OP_DISABLE_FP_DEVICE (0x11) +#define MPI26_CTRL_OP_ENABLE_FP_ALL (0x12) +#define MPI26_CTRL_OP_DISABLE_FP_ALL (0x13) +#define MPI26_CTRL_OP_DEV_ENABLE_NCQ (0x14) +#define MPI26_CTRL_OP_DEV_DISABLE_NCQ (0x15) +#define MPI26_CTRL_OP_SHUTDOWN (0x16) +#define MPI26_CTRL_OP_DEV_ENABLE_PERSIST_CONNECTION (0x17) +#define MPI26_CTRL_OP_DEV_DISABLE_PERSIST_CONNECTION (0x18) +#define MPI26_CTRL_OP_DEV_CLOSE_PERSIST_CONNECTION (0x19) +#define MPI26_CTRL_OP_PRODUCT_SPECIFIC_MIN (0x80) + +/* values for the PrimFlags field */ +#define MPI26_CTRL_PRIMFLAGS_SINGLE (0x08) +#define MPI26_CTRL_PRIMFLAGS_TRIPLE (0x02) +#define MPI26_CTRL_PRIMFLAGS_REDUNDANT (0x01) + +/* values for the LookupMethod field */ +#define MPI26_CTRL_LOOKUP_METHOD_WWID_ADDRESS (0x01) +#define MPI26_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT (0x02) +#define MPI26_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) + + +/* IO Unit Control Reply Message */ +typedef struct _MPI26_IOUNIT_CONTROL_REPLY { + U8 Operation; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 DevHandle; /* 0x04 */ + U8 IOCParameter; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U16 Reserved4; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI26_IOUNIT_CONTROL_REPLY, + *PTR_MPI26_IOUNIT_CONTROL_REPLY, + Mpi26IoUnitControlReply_t, + *pMpi26IoUnitControlReply_t; + + #endif |