1 files changed, 95 insertions, 6 deletions

diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index 861dc522723c..e80e41b6c9e1 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -1,8 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * QLogic Fibre Channel HBA Driver
  * Copyright (c)  2003-2014 QLogic Corporation
- *
- * See LICENSE.qla2xxx for copyright and licensing details.
  */
 
 #include "qla_target.h"
@@ -207,10 +206,15 @@ qla2xxx_get_qpair_sp(scsi_qla_host_t *vha, struct qla_qpair *qpair,
 	return sp;
 }
 
+void qla2xxx_rel_done_warning(srb_t *sp, int res);
+void qla2xxx_rel_free_warning(srb_t *sp);
+
 static inline void
 qla2xxx_rel_qpair_sp(struct qla_qpair *qpair, srb_t *sp)
 {
 	sp->qpair = NULL;
+	sp->done = qla2xxx_rel_done_warning;
+	sp->free = qla2xxx_rel_free_warning;
 	mempool_free(sp, qpair->srb_mempool);
 	QLA_QPAIR_MARK_NOT_BUSY(qpair);
 }
@@ -266,11 +270,41 @@ qla2x00_handle_mbx_completion(struct qla_hw_data *ha, int status)
 }
 
 static inline void
-qla2x00_set_retry_delay_timestamp(fc_port_t *fcport, uint16_t retry_delay)
+qla2x00_set_retry_delay_timestamp(fc_port_t *fcport, uint16_t sts_qual)
 {
-	if (retry_delay)
-		fcport->retry_delay_timestamp = jiffies +
-		    (retry_delay * HZ / 10);
+	u8 scope;
+	u16 qual;
+#define SQ_SCOPE_MASK		0xc000 /* SAM-6 rev5 5.3.2 */
+#define SQ_SCOPE_SHIFT		14
+#define SQ_QUAL_MASK		0x3fff
+
+#define SQ_MAX_WAIT_SEC		60 /* Max I/O hold off time in seconds. */
+#define SQ_MAX_WAIT_TIME	(SQ_MAX_WAIT_SEC * 10) /* in 100ms. */
+
+	if (!sts_qual) /* Common case. */
+		return;
+
+	scope = (sts_qual & SQ_SCOPE_MASK) >> SQ_SCOPE_SHIFT;
+	/* Handle only scope 1 or 2, which is for I-T nexus. */
+	if (scope != 1 && scope != 2)
+		return;
+
+	/* Skip processing, if retry delay timer is already in effect. */
+	if (fcport->retry_delay_timestamp &&
+	    time_before(jiffies, fcport->retry_delay_timestamp))
+		return;
+
+	qual = sts_qual & SQ_QUAL_MASK;
+	if (qual < 1 || qual > 0x3fef)
+		return;
+	qual = min(qual, (u16)SQ_MAX_WAIT_TIME);
+
+	/* qual is expressed in 100ms increments. */
+	fcport->retry_delay_timestamp = jiffies + (qual * HZ / 10);
+
+	ql_log(ql_log_warn, fcport->vha, 0x5101,
+	       "%8phC: I/O throttling requested (status qualifier = %04xh), holding off I/Os for %ums.\n",
+	       fcport->port_name, sts_qual, qual * 100);
 }
 
 static inline bool
@@ -343,3 +377,58 @@ qla2xxx_get_fc4_priority(struct scsi_qla_host *vha)
 
 	return (data >> 6) & BIT_0 ? FC4_PRIORITY_FCP : FC4_PRIORITY_NVME;
 }
+
+enum {
+	RESOURCE_NONE,
+	RESOURCE_INI,
+};
+
+static inline int
+qla_get_iocbs(struct qla_qpair *qp, struct iocb_resource *iores)
+{
+	u16 iocbs_used, i;
+	struct qla_hw_data *ha = qp->vha->hw;
+
+	if (!ql2xenforce_iocb_limit) {
+		iores->res_type = RESOURCE_NONE;
+		return 0;
+	}
+
+	if ((iores->iocb_cnt + qp->fwres.iocbs_used) < qp->fwres.iocbs_qp_limit) {
+		qp->fwres.iocbs_used += iores->iocb_cnt;
+		return 0;
+	} else {
+		/* no need to acquire qpair lock. It's just rough calculation */
+		iocbs_used = ha->base_qpair->fwres.iocbs_used;
+		for (i = 0; i < ha->max_qpairs; i++) {
+			if (ha->queue_pair_map[i])
+				iocbs_used += ha->queue_pair_map[i]->fwres.iocbs_used;
+		}
+
+		if ((iores->iocb_cnt + iocbs_used) < qp->fwres.iocbs_limit) {
+			qp->fwres.iocbs_used += iores->iocb_cnt;
+			return 0;
+		} else {
+			iores->res_type = RESOURCE_NONE;
+			return -ENOSPC;
+		}
+	}
+}
+
+static inline void
+qla_put_iocbs(struct qla_qpair *qp, struct iocb_resource *iores)
+{
+	switch (iores->res_type) {
+	case RESOURCE_NONE:
+		break;
+	default:
+		if (qp->fwres.iocbs_used >= iores->iocb_cnt) {
+			qp->fwres.iocbs_used -= iores->iocb_cnt;
+		} else {
+			// should not happen
+			qp->fwres.iocbs_used = 0;
+		}
+		break;
+	}
+	iores->res_type = RESOURCE_NONE;
+}