diff options
Diffstat (limited to 'drivers/scsi/sd.c')
-rw-r--r-- | drivers/scsi/sd.c | 81 |
1 files changed, 56 insertions, 25 deletions
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index b1933041da39..cb6e68dd6df0 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -703,7 +703,7 @@ static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode) /** * sd_setup_discard_cmnd - unmap blocks on thinly provisioned device - * @sdp: scsi device to operate one + * @sdp: scsi device to operate on * @rq: Request to prepare * * Will issue either UNMAP or WRITE SAME(16) depending on preference @@ -781,7 +781,7 @@ static int sd_setup_discard_cmnd(struct scsi_cmnd *cmd) rq->special_vec.bv_len = len; rq->rq_flags |= RQF_SPECIAL_PAYLOAD; - rq->resid_len = len; + scsi_req(rq)->resid_len = len; ret = scsi_init_io(cmd); out: @@ -871,11 +871,11 @@ static int sd_setup_write_same_cmnd(struct scsi_cmnd *cmd) cmd->allowed = SD_MAX_RETRIES; /* - * For WRITE_SAME the data transferred in the DATA IN buffer is + * For WRITE SAME the data transferred via the DATA OUT buffer is * different from the amount of data actually written to the target. * - * We set up __data_len to the amount of data transferred from the - * DATA IN buffer so that blk_rq_map_sg set up the proper S/G list + * We set up __data_len to the amount of data transferred via the + * DATA OUT buffer so that blk_rq_map_sg sets up the proper S/G list * to transfer a single sector of data first, but then reset it to * the amount of data to be written right after so that the I/O path * knows how much to actually write. @@ -1179,7 +1179,7 @@ static void sd_uninit_command(struct scsi_cmnd *SCpnt) if (rq->rq_flags & RQF_SPECIAL_PAYLOAD) __free_page(rq->special_vec.bv_page); - if (SCpnt->cmnd != rq->cmd) { + if (SCpnt->cmnd != scsi_req(rq)->cmd) { mempool_free(SCpnt->cmnd, sd_cdb_pool); SCpnt->cmnd = NULL; SCpnt->cmd_len = 0; @@ -1750,9 +1750,6 @@ static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd) unsigned int transferred = scsi_bufflen(scmd) - scsi_get_resid(scmd); unsigned int good_bytes; - if (scmd->request->cmd_type != REQ_TYPE_FS) - return 0; - info_valid = scsi_get_sense_info_fld(scmd->sense_buffer, SCSI_SENSE_BUFFERSIZE, &bad_lba); @@ -2600,7 +2597,8 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer) if (sdp->broken_fua) { sd_first_printk(KERN_NOTICE, sdkp, "Disabling FUA\n"); sdkp->DPOFUA = 0; - } else if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw) { + } else if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw && + !sdkp->device->use_16_for_rw) { sd_first_printk(KERN_NOTICE, sdkp, "Uses READ/WRITE(6), disabling FUA\n"); sdkp->DPOFUA = 0; @@ -2783,13 +2781,21 @@ static void sd_read_block_characteristics(struct scsi_disk *sdkp) queue_flag_clear_unlocked(QUEUE_FLAG_ADD_RANDOM, q); } - sdkp->zoned = (buffer[8] >> 4) & 3; - if (sdkp->zoned == 1) - q->limits.zoned = BLK_ZONED_HA; - else if (sdkp->device->type == TYPE_ZBC) + if (sdkp->device->type == TYPE_ZBC) { + /* Host-managed */ q->limits.zoned = BLK_ZONED_HM; - else - q->limits.zoned = BLK_ZONED_NONE; + } else { + sdkp->zoned = (buffer[8] >> 4) & 3; + if (sdkp->zoned == 1) + /* Host-aware */ + q->limits.zoned = BLK_ZONED_HA; + else + /* + * Treat drive-managed devices as + * regular block devices. + */ + q->limits.zoned = BLK_ZONED_NONE; + } if (blk_queue_is_zoned(q) && sdkp->first_scan) sd_printk(KERN_NOTICE, sdkp, "Host-%s zoned block device\n", q->limits.zoned == BLK_ZONED_HM ? "managed" : "aware"); @@ -3073,6 +3079,23 @@ static void sd_probe_async(void *data, async_cookie_t cookie) put_device(&sdkp->dev); } +struct sd_devt { + int idx; + struct disk_devt disk_devt; +}; + +void sd_devt_release(struct disk_devt *disk_devt) +{ + struct sd_devt *sd_devt = container_of(disk_devt, struct sd_devt, + disk_devt); + + spin_lock(&sd_index_lock); + ida_remove(&sd_index_ida, sd_devt->idx); + spin_unlock(&sd_index_lock); + + kfree(sd_devt); +} + /** * sd_probe - called during driver initialization and whenever a * new scsi device is attached to the system. It is called once @@ -3094,6 +3117,7 @@ static void sd_probe_async(void *data, async_cookie_t cookie) static int sd_probe(struct device *dev) { struct scsi_device *sdp = to_scsi_device(dev); + struct sd_devt *sd_devt; struct scsi_disk *sdkp; struct gendisk *gd; int index; @@ -3119,9 +3143,13 @@ static int sd_probe(struct device *dev) if (!sdkp) goto out; + sd_devt = kzalloc(sizeof(*sd_devt), GFP_KERNEL); + if (!sd_devt) + goto out_free; + gd = alloc_disk(SD_MINORS); if (!gd) - goto out_free; + goto out_free_devt; do { if (!ida_pre_get(&sd_index_ida, GFP_KERNEL)) @@ -3137,6 +3165,11 @@ static int sd_probe(struct device *dev) goto out_put; } + atomic_set(&sd_devt->disk_devt.count, 1); + sd_devt->disk_devt.release = sd_devt_release; + sd_devt->idx = index; + gd->disk_devt = &sd_devt->disk_devt; + error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN); if (error) { sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name length exceeded.\n"); @@ -3176,13 +3209,14 @@ static int sd_probe(struct device *dev) return 0; out_free_index: - spin_lock(&sd_index_lock); - ida_remove(&sd_index_ida, index); - spin_unlock(&sd_index_lock); + put_disk_devt(&sd_devt->disk_devt); + sd_devt = NULL; out_put: put_disk(gd); out_free: kfree(sdkp); + out_free_devt: + kfree(sd_devt); out: scsi_autopm_put_device(sdp); return error; @@ -3192,7 +3226,7 @@ static int sd_probe(struct device *dev) * sd_remove - called whenever a scsi disk (previously recognized by * sd_probe) is detached from the system. It is called (potentially * multiple times) during sd module unload. - * @sdp: pointer to mid level scsi device object + * @dev: pointer to device object * * Note: this function is invoked from the scsi mid-level. * This function potentially frees up a device name (e.g. /dev/sdc) @@ -3241,10 +3275,7 @@ static void scsi_disk_release(struct device *dev) struct scsi_disk *sdkp = to_scsi_disk(dev); struct gendisk *disk = sdkp->disk; - spin_lock(&sd_index_lock); - ida_remove(&sd_index_ida, sdkp->index); - spin_unlock(&sd_index_lock); - + put_disk_devt(disk->disk_devt); disk->private_data = NULL; put_disk(disk); put_device(&sdkp->device->sdev_gendev); |