diff options
Diffstat (limited to 'drivers/scsi/ufs')
| -rw-r--r-- | drivers/scsi/ufs/ufshcd.c | 19 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufshcd.h | 21 |
2 files changed, 36 insertions, 4 deletions
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 648a44675880..9641bcb90cd2 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -481,6 +481,15 @@ ufshcd_config_intr_aggr(struct ufs_hba *hba, u8 cnt, u8 tmout) } /** + * ufshcd_disable_intr_aggr - Disables interrupt aggregation. + * @hba: per adapter instance + */ +static inline void ufshcd_disable_intr_aggr(struct ufs_hba *hba) +{ + ufshcd_writel(hba, 0, REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL); +} + +/** * ufshcd_enable_run_stop_reg - Enable run-stop registers, * When run-stop registers are set to 1, it indicates the * host controller that it can process the requests @@ -1326,7 +1335,7 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) lrbp->sense_buffer = cmd->sense_buffer; lrbp->task_tag = tag; lrbp->lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun); - lrbp->intr_cmd = false; + lrbp->intr_cmd = !ufshcd_is_intr_aggr_allowed(hba) ? true : false; lrbp->command_type = UTP_CMD_TYPE_SCSI; /* form UPIU before issuing the command */ @@ -2522,7 +2531,10 @@ static int ufshcd_make_hba_operational(struct ufs_hba *hba) ufshcd_enable_intr(hba, UFSHCD_ENABLE_INTRS); /* Configure interrupt aggregation */ - ufshcd_config_intr_aggr(hba, hba->nutrs - 1, INT_AGGR_DEF_TO); + if (ufshcd_is_intr_aggr_allowed(hba)) + ufshcd_config_intr_aggr(hba, hba->nutrs - 1, INT_AGGR_DEF_TO); + else + ufshcd_disable_intr_aggr(hba); /* Configure UTRL and UTMRL base address registers */ ufshcd_writel(hba, lower_32_bits(hba->utrdl_dma_addr), @@ -3073,7 +3085,8 @@ static void ufshcd_transfer_req_compl(struct ufs_hba *hba) * false interrupt if device completes another request after resetting * aggregation and before reading the DB. */ - ufshcd_reset_intr_aggr(hba); + if (ufshcd_is_intr_aggr_allowed(hba)) + ufshcd_reset_intr_aggr(hba); tr_doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); completed_reqs = tr_doorbell ^ hba->outstanding_reqs; diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index b47ff07698e8..fc8bec9960b1 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -417,11 +417,15 @@ struct ufs_hba { unsigned int irq; bool is_irq_enabled; + /* Interrupt aggregation support is broken */ + #define UFSHCD_QUIRK_BROKEN_INTR_AGGR UFS_BIT(0) + /* * delay before each dme command is required as the unipro * layer has shown instabilities */ - #define UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS UFS_BIT(0) + #define UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS UFS_BIT(1) + unsigned int quirks; /* Deviations from standard UFSHCI spec. */ @@ -478,6 +482,12 @@ struct ufs_hba { #define UFSHCD_CAP_CLK_SCALING (1 << 2) /* Allow auto bkops to enabled during runtime suspend */ #define UFSHCD_CAP_AUTO_BKOPS_SUSPEND (1 << 3) + /* + * This capability allows host controller driver to use the UFS HCI's + * interrupt aggregation capability. + * CAUTION: Enabling this might reduce overall UFS throughput. + */ +#define UFSHCD_CAP_INTR_AGGR (1 << 4) struct devfreq *devfreq; struct ufs_clk_scaling clk_scaling; @@ -502,6 +512,15 @@ static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba) return hba->caps & UFSHCD_CAP_AUTO_BKOPS_SUSPEND; } +static inline bool ufshcd_is_intr_aggr_allowed(struct ufs_hba *hba) +{ + if ((hba->caps & UFSHCD_CAP_INTR_AGGR) && + !(hba->quirks & UFSHCD_QUIRK_BROKEN_INTR_AGGR)) + return true; + else + return false; +} + #define ufshcd_writel(hba, val, reg) \ writel((val), (hba)->mmio_base + (reg)) #define ufshcd_readl(hba, reg) \ |