diff options
Diffstat (limited to 'drivers/serial/bfin_5xx.c')
| -rw-r--r-- | drivers/serial/bfin_5xx.c | 222 |
1 files changed, 151 insertions, 71 deletions
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 66c92bc36f3d..6f475b609864 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -86,10 +86,8 @@ static void bfin_serial_stop_tx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; -#ifdef CONFIG_BF54x while (!(UART_GET_LSR(uart) & TEMT)) continue; -#endif #ifdef CONFIG_SERIAL_BFIN_DMA disable_dma(uart->tx_dma_channel); @@ -128,8 +126,8 @@ static void bfin_serial_start_tx(struct uart_port *port) ier = UART_GET_IER(uart); ier |= ETBEI; UART_PUT_IER(uart, ier); - bfin_serial_tx_chars(uart); #endif + bfin_serial_tx_chars(uart); #endif } @@ -139,18 +137,21 @@ static void bfin_serial_start_tx(struct uart_port *port) static void bfin_serial_stop_rx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; +#ifdef CONFIG_KGDB_UART + if (uart->port.line != CONFIG_KGDB_UART_PORT) { +#endif #ifdef CONFIG_BF54x UART_CLEAR_IER(uart, ERBFI); #else unsigned short ier; ier = UART_GET_IER(uart); -#ifdef CONFIG_KGDB_UART - if (uart->port.line != CONFIG_KGDB_UART_PORT) -#endif ier &= ~ERBFI; UART_PUT_IER(uart, ier); #endif +#ifdef CONFIG_KGDB_UART + } +#endif } /* @@ -173,12 +174,15 @@ void kgdb_put_debug_char(int chr) uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; while (!(UART_GET_LSR(uart) & THRE)) { - __builtin_bfin_ssync(); + SSYNC(); } + +#ifndef CONFIG_BF54x UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB)); - __builtin_bfin_ssync(); + SSYNC(); +#endif UART_PUT_CHAR(uart, (unsigned char)chr); - __builtin_bfin_ssync(); + SSYNC(); } int kgdb_get_debug_char(void) @@ -192,12 +196,14 @@ int kgdb_get_debug_char(void) uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; while(!(UART_GET_LSR(uart) & DR)) { - __builtin_bfin_ssync(); + SSYNC(); } +#ifndef CONFIG_BF54x UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB)); - __builtin_bfin_ssync(); + SSYNC(); +#endif chr = UART_GET_CHAR(uart); - __builtin_bfin_ssync(); + SSYNC(); return chr; } @@ -225,12 +231,10 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) { struct tty_struct *tty = uart->port.info->tty; unsigned int status, ch, flg; + static int in_break = 0; #ifdef CONFIG_KGDB_UART struct pt_regs *regs = get_irq_regs(); #endif -#ifdef BF533_FAMILY - static int in_break = 0; -#endif status = UART_GET_LSR(uart); ch = UART_GET_CHAR(uart); @@ -256,29 +260,30 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) } } #endif - -#ifdef BF533_FAMILY - /* The BF533 family of processors have a nice misbehavior where - * they continuously generate characters for a "single" break. - * We have to basically ignore this flood until the "next" valid - * character comes across. All other Blackfin families operate - * properly though. - */ - if (in_break) { - if (ch != 0) { - in_break = 0; - ch = UART_GET_CHAR(uart); - if (bfin_revid() < 5) + + if (ANOMALY_05000230) { + /* The BF533 family of processors have a nice misbehavior where + * they continuously generate characters for a "single" break. + * We have to basically ignore this flood until the "next" valid + * character comes across. All other Blackfin families operate + * properly though. + * Note: While Anomaly 05000230 does not directly address this, + * the changes that went in for it also fixed this issue. + */ + if (in_break) { + if (ch != 0) { + in_break = 0; + ch = UART_GET_CHAR(uart); + if (bfin_revid() < 5) + return; + } else return; - } else - return; + } } -#endif if (status & BI) { -#ifdef BF533_FAMILY - in_break = 1; -#endif + if (ANOMALY_05000230) + in_break = 1; uart->port.icount.brk++; if (uart_handle_break(&uart->port)) goto ignore_char; @@ -697,17 +702,19 @@ static int bfin_serial_startup(struct uart_port *port) uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; add_timer(&(uart->rx_dma_timer)); #else + if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED, + "BFIN_UART_RX", uart)) { # ifdef CONFIG_KGDB_UART - if (uart->port.line != CONFIG_KGDB_UART_PORT && request_irq -# else - if (request_irq + if (uart->port.line != CONFIG_KGDB_UART_PORT) { # endif - (uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED, - "BFIN_UART_RX", uart)) { printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n"); return -EBUSY; +# ifdef CONFIG_KGDB_UART + } +# endif } + if (request_irq (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED, "BFIN_UART_TX", uart)) { @@ -962,30 +969,6 @@ static void __init bfin_serial_init_ports(void) } #ifdef CONFIG_SERIAL_BFIN_CONSOLE -static void bfin_serial_console_putchar(struct uart_port *port, int ch) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - while (!(UART_GET_LSR(uart) & THRE)) - barrier(); - UART_PUT_CHAR(uart, ch); - SSYNC(); -} - -/* - * Interrupts are disabled on entering - */ -static void -bfin_serial_console_write(struct console *co, const char *s, unsigned int count) -{ - struct bfin_serial_port *uart = &bfin_serial_ports[co->index]; - int flags = 0; - - spin_lock_irqsave(&uart->port.lock, flags); - uart_console_write(&uart->port, s, count, bfin_serial_console_putchar); - spin_unlock_irqrestore(&uart->port.lock, flags); - -} - /* * If the port was already initialised (eg, by a boot loader), * try to determine the current setup. @@ -1038,19 +1021,25 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud, } pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __FUNCTION__, *baud, *parity, *bits); } +#endif + +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +static struct uart_driver bfin_serial_reg; static int __init bfin_serial_console_setup(struct console *co, char *options) { struct bfin_serial_port *uart; +# ifdef CONFIG_SERIAL_BFIN_CONSOLE int baud = 57600; int bits = 8; int parity = 'n'; -#ifdef CONFIG_SERIAL_BFIN_CTSRTS +# ifdef CONFIG_SERIAL_BFIN_CTSRTS int flow = 'r'; -#else +# else int flow = 'n'; -#endif +# endif +# endif /* * Check whether an invalid uart number has been specified, and @@ -1061,15 +1050,45 @@ bfin_serial_console_setup(struct console *co, char *options) co->index = 0; uart = &bfin_serial_ports[co->index]; +# ifdef CONFIG_SERIAL_BFIN_CONSOLE if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else bfin_serial_console_get_options(uart, &baud, &parity, &bits); return uart_set_options(&uart->port, co, baud, parity, bits, flow); +# else + return 0; +# endif +} +#endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) || + defined (CONFIG_EARLY_PRINTK) */ + +#ifdef CONFIG_SERIAL_BFIN_CONSOLE +static void bfin_serial_console_putchar(struct uart_port *port, int ch) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + while (!(UART_GET_LSR(uart) & THRE)) + barrier(); + UART_PUT_CHAR(uart, ch); + SSYNC(); +} + +/* + * Interrupts are disabled on entering + */ +static void +bfin_serial_console_write(struct console *co, const char *s, unsigned int count) +{ + struct bfin_serial_port *uart = &bfin_serial_ports[co->index]; + int flags = 0; + + spin_lock_irqsave(&uart->port.lock, flags); + uart_console_write(&uart->port, s, count, bfin_serial_console_putchar); + spin_unlock_irqrestore(&uart->port.lock, flags); + } -static struct uart_driver bfin_serial_reg; static struct console bfin_serial_console = { .name = BFIN_SERIAL_NAME, .write = bfin_serial_console_write, @@ -1095,7 +1114,64 @@ console_initcall(bfin_serial_rs_console_init); #define BFIN_SERIAL_CONSOLE &bfin_serial_console #else #define BFIN_SERIAL_CONSOLE NULL -#endif +#endif /* CONFIG_SERIAL_BFIN_CONSOLE */ + + +#ifdef CONFIG_EARLY_PRINTK +static __init void early_serial_putc(struct uart_port *port, int ch) +{ + unsigned timeout = 0xffff; + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + + while ((!(UART_GET_LSR(uart) & THRE)) && --timeout) + cpu_relax(); + UART_PUT_CHAR(uart, ch); +} + +static __init void early_serial_write(struct console *con, const char *s, + unsigned int n) +{ + struct bfin_serial_port *uart = &bfin_serial_ports[con->index]; + unsigned int i; + + for (i = 0; i < n; i++, s++) { + if (*s == '\n') + early_serial_putc(&uart->port, '\r'); + early_serial_putc(&uart->port, *s); + } +} + +static struct __init console bfin_early_serial_console = { + .name = "early_BFuart", + .write = early_serial_write, + .device = uart_console_device, + .flags = CON_PRINTBUFFER, + .setup = bfin_serial_console_setup, + .index = -1, + .data = &bfin_serial_reg, +}; + +struct console __init *bfin_earlyserial_init(unsigned int port, + unsigned int cflag) +{ + struct bfin_serial_port *uart; + struct ktermios t; + + if (port == -1 || port >= nr_ports) + port = 0; + bfin_serial_init_ports(); + bfin_early_serial_console.index = port; + uart = &bfin_serial_ports[port]; + t.c_cflag = cflag; + t.c_iflag = 0; + t.c_oflag = 0; + t.c_lflag = ICANON; + t.c_line = port; + bfin_serial_set_termios(&uart->port, &t, &t); + return &bfin_early_serial_console; +} + +#endif /* CONFIG_SERIAL_BFIN_CONSOLE */ static struct uart_driver bfin_serial_reg = { .owner = THIS_MODULE, @@ -1182,7 +1258,7 @@ static int __init bfin_serial_init(void) int ret; #ifdef CONFIG_KGDB_UART struct bfin_serial_port *uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; - struct termios t; + struct ktermios t; #endif pr_info("Serial: Blackfin serial driver\n"); @@ -1199,11 +1275,15 @@ static int __init bfin_serial_init(void) } #ifdef CONFIG_KGDB_UART if (uart->port.cons->index != CONFIG_KGDB_UART_PORT) { - request_irq(uart->port.irq, bfin_serial_int, + request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED, "BFIN_UART_RX", uart); pr_info("Request irq for kgdb uart port\n"); +#ifdef CONFIG_BF54x + UART_SET_IER(uart, ERBFI); +#else UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI); - __builtin_bfin_ssync(); +#endif + SSYNC(); t.c_cflag = CS8|B57600; t.c_iflag = 0; t.c_oflag = 0; |