aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/68328serial.c29
-rw-r--r--drivers/serial/8250_early.c4
-rw-r--r--drivers/serial/amba-pl010.c9
-rw-r--r--drivers/serial/bfin_sport_uart.c2
-rw-r--r--drivers/serial/ioc3_serial.c1
-rw-r--r--drivers/serial/mfd.c18
-rw-r--r--drivers/serial/mpc52xx_uart.c1
-rw-r--r--drivers/serial/mrst_max3110.c1
-rw-r--r--drivers/serial/of_serial.c3
-rw-r--r--drivers/serial/serial_cs.c62
-rw-r--r--drivers/serial/sn_console.c2
-rw-r--r--drivers/serial/suncore.c15
12 files changed, 76 insertions, 71 deletions
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index 7356a56ac458..be0ebce36e54 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -869,7 +869,9 @@ static int get_serial_info(struct m68k_serial * info,
tmp.close_delay = info->close_delay;
tmp.closing_wait = info->closing_wait;
tmp.custom_divisor = info->custom_divisor;
- copy_to_user(retinfo,&tmp,sizeof(*retinfo));
+ if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+ return -EFAULT;
+
return 0;
}
@@ -882,7 +884,8 @@ static int set_serial_info(struct m68k_serial * info,
if (!new_info)
return -EFAULT;
- copy_from_user(&new_serial,new_info,sizeof(new_serial));
+ if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
+ return -EFAULT;
old_info = *info;
if (!capable(CAP_SYS_ADMIN)) {
@@ -943,8 +946,7 @@ static int get_lsr_info(struct m68k_serial * info, unsigned int *value)
status = 0;
#endif
local_irq_restore(flags);
- put_user(status,value);
- return 0;
+ return put_user(status, value);
}
/*
@@ -999,27 +1001,18 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
send_break(info, arg ? arg*(100) : 250);
return 0;
case TIOCGSERIAL:
- if (access_ok(VERIFY_WRITE, (void *) arg,
- sizeof(struct serial_struct)))
- return get_serial_info(info,
- (struct serial_struct *) arg);
- return -EFAULT;
+ return get_serial_info(info,
+ (struct serial_struct *) arg);
case TIOCSSERIAL:
return set_serial_info(info,
(struct serial_struct *) arg);
case TIOCSERGETLSR: /* Get line status register */
- if (access_ok(VERIFY_WRITE, (void *) arg,
- sizeof(unsigned int)))
- return get_lsr_info(info, (unsigned int *) arg);
- return -EFAULT;
+ return get_lsr_info(info, (unsigned int *) arg);
case TIOCSERGSTRUCT:
- if (!access_ok(VERIFY_WRITE, (void *) arg,
- sizeof(struct m68k_serial)))
+ if (copy_to_user((struct m68k_serial *) arg,
+ info, sizeof(struct m68k_serial)))
return -EFAULT;
- copy_to_user((struct m68k_serial *) arg,
- info, sizeof(struct m68k_serial));
return 0;
-
default:
return -ENOIOCTLCMD;
}
diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c
index b745792ec25a..eaafb98debed 100644
--- a/drivers/serial/8250_early.c
+++ b/drivers/serial/8250_early.c
@@ -203,13 +203,13 @@ static int __init parse_options(struct early_serial8250_device *device,
if (mmio || mmio32)
printk(KERN_INFO
- "Early serial console at MMIO%s 0x%llu (options '%s')\n",
+ "Early serial console at MMIO%s 0x%llx (options '%s')\n",
mmio32 ? "32" : "",
(unsigned long long)port->mapbase,
device->options);
else
printk(KERN_INFO
- "Early serial console at I/O port 0x%lu (options '%s')\n",
+ "Early serial console at I/O port 0x%lx (options '%s')\n",
port->iobase,
device->options);
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 50441ffe8e38..2904aa044126 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -472,14 +472,9 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
spin_unlock_irqrestore(&uap->port.lock, flags);
}
-static void pl010_set_ldisc(struct uart_port *port)
+static void pl010_set_ldisc(struct uart_port *port, int new)
{
- int line = port->line;
-
- if (line >= port->state->port.tty->driver->num)
- return;
-
- if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+ if (new == N_PPS) {
port->flags |= UPF_HARDPPS_CD;
pl010_enable_ms(port);
} else
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index e57fb3d228e2..5318dd3774ae 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -121,7 +121,7 @@ static int sport_uart_setup(struct sport_uart_port *up, int size, int baud_rate)
unsigned int sclk = get_sclk();
/* Set TCR1 and TCR2, TFSR is not enabled for uart */
- SPORT_PUT_TCR1(up, (ITFS | TLSBIT | ITCLK));
+ SPORT_PUT_TCR1(up, (LATFS | ITFS | TFSR | TLSBIT | ITCLK));
SPORT_PUT_TCR2(up, size + 1);
pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up));
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index 93de907b1208..800c54602339 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -2044,6 +2044,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
if (!port) {
printk(KERN_WARNING
"IOC3 serial memory not available for port\n");
+ ret = -ENOMEM;
goto out4;
}
spin_lock_init(&port->ip_lock);
diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c
index bc9af503907f..5dff45c76d32 100644
--- a/drivers/serial/mfd.c
+++ b/drivers/serial/mfd.c
@@ -27,6 +27,7 @@
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
+#include <linux/slab.h>
#include <linux/serial_reg.h>
#include <linux/circ_buf.h>
#include <linux/delay.h>
@@ -1423,7 +1424,6 @@ static void hsu_global_init(void)
}
phsu = hsu;
-
hsu_debugfs_init(hsu);
return;
@@ -1435,18 +1435,20 @@ err_free_region:
static void serial_hsu_remove(struct pci_dev *pdev)
{
- struct hsu_port *hsu;
- int i;
+ void *priv = pci_get_drvdata(pdev);
+ struct uart_hsu_port *up;
- hsu = pci_get_drvdata(pdev);
- if (!hsu)
+ if (!priv)
return;
- for (i = 0; i < 3; i++)
- uart_remove_one_port(&serial_hsu_reg, &hsu->port[i].port);
+ /* For port 0/1/2, priv is the address of uart_hsu_port */
+ if (pdev->device != 0x081E) {
+ up = priv;
+ uart_remove_one_port(&serial_hsu_reg, &up->port);
+ }
pci_set_drvdata(pdev, NULL);
- free_irq(hsu->irq, hsu);
+ free_irq(pdev->irq, priv);
pci_disable_device(pdev);
}
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 8dedb266f143..c4399e23565a 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -500,6 +500,7 @@ static int __init mpc512x_psc_fifoc_init(void)
psc_fifoc = of_iomap(np, 0);
if (!psc_fifoc) {
pr_err("%s: Can't map FIFOC\n", __func__);
+ of_node_put(np);
return -ENODEV;
}
diff --git a/drivers/serial/mrst_max3110.c b/drivers/serial/mrst_max3110.c
index f6ad1ecbff79..51c15f58e01e 100644
--- a/drivers/serial/mrst_max3110.c
+++ b/drivers/serial/mrst_max3110.c
@@ -29,6 +29,7 @@
#include <linux/module.h>
#include <linux/ioport.h>
+#include <linux/irq.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index 659a695bdad6..2af8fd113123 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -14,11 +14,10 @@
#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
+#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/nwpserial.h>
-#include <asm/prom.h>
-
struct of_serial_info {
int type;
int line;
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 141c69554bd4..7d475b2a79e8 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -335,8 +335,6 @@ static int serial_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = info;
- link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
- link->resource[0]->end = 8;
link->conf.Attributes = CONF_ENABLE_IRQ;
if (do_sound) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -411,6 +409,27 @@ static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
/*====================================================================*/
+static int pfc_config(struct pcmcia_device *p_dev)
+{
+ unsigned int port = 0;
+ struct serial_info *info = p_dev->priv;
+
+ if ((p_dev->resource[1]->end != 0) &&
+ (resource_size(p_dev->resource[1]) == 8)) {
+ port = p_dev->resource[1]->start;
+ info->slave = 1;
+ } else if ((info->manfid == MANFID_OSITECH) &&
+ (resource_size(p_dev->resource[0]) == 0x40)) {
+ port = p_dev->resource[0]->start + 0x28;
+ info->slave = 1;
+ }
+ if (info->slave)
+ return setup_serial(p_dev, info, port, p_dev->irq);
+
+ dev_warn(&p_dev->dev, "no usable port range found, giving up\n");
+ return -ENODEV;
+}
+
static int simple_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cf,
cistpl_cftable_entry_t *dflt,
@@ -461,23 +480,8 @@ static int simple_config(struct pcmcia_device *link)
struct serial_info *info = link->priv;
int i = -ENODEV, try;
- /* If the card is already configured, look up the port and irq */
- if (link->function_config) {
- unsigned int port = 0;
- if ((link->resource[1]->end != 0) &&
- (resource_size(link->resource[1]) == 8)) {
- port = link->resource[1]->end;
- info->slave = 1;
- } else if ((info->manfid == MANFID_OSITECH) &&
- (resource_size(link->resource[0]) == 0x40)) {
- port = link->resource[0]->start + 0x28;
- info->slave = 1;
- }
- if (info->slave) {
- return setup_serial(link, info, port,
- link->irq);
- }
- }
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[0]->end = 8;
/* First pass: look for a config entry that looks normal.
* Two tries: without IO aliases, then with aliases */
@@ -491,8 +495,7 @@ static int simple_config(struct pcmcia_device *link)
if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
goto found_port;
- printk(KERN_NOTICE
- "serial_cs: no usable port range found, giving up\n");
+ dev_warn(&link->dev, "no usable port range found, giving up\n");
return -1;
found_port:
@@ -558,6 +561,7 @@ static int multi_config(struct pcmcia_device *link)
int i, base2 = 0;
/* First, look for a generic full-sized window */
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
link->resource[0]->end = info->multi * 8;
if (pcmcia_loop_config(link, multi_config_check, &base2)) {
/* If that didn't work, look for two windows */
@@ -565,15 +569,14 @@ static int multi_config(struct pcmcia_device *link)
info->multi = 2;
if (pcmcia_loop_config(link, multi_config_check_notpicky,
&base2)) {
- printk(KERN_NOTICE "serial_cs: no usable port range"
+ dev_warn(&link->dev, "no usable port range "
"found, giving up\n");
return -ENODEV;
}
}
if (!link->irq)
- dev_warn(&link->dev,
- "serial_cs: no usable IRQ found, continuing...\n");
+ dev_warn(&link->dev, "no usable IRQ found, continuing...\n");
/*
* Apply any configuration quirks.
@@ -675,6 +678,7 @@ static int serial_config(struct pcmcia_device * link)
multifunction cards that ask for appropriate IO port ranges */
if ((info->multi == 0) &&
(link->has_func_id) &&
+ (link->socket->pcmcia_pfc == 0) &&
((link->func_id == CISTPL_FUNCID_MULTI) ||
(link->func_id == CISTPL_FUNCID_SERIAL)))
pcmcia_loop_config(link, serial_check_for_multi, info);
@@ -685,7 +689,13 @@ static int serial_config(struct pcmcia_device * link)
if (info->quirk && info->quirk->multi != -1)
info->multi = info->quirk->multi;
- if (info->multi > 1)
+ dev_info(&link->dev,
+ "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n",
+ link->manf_id, link->card_id,
+ link->socket->pcmcia_pfc, info->multi, info->quirk);
+ if (link->socket->pcmcia_pfc)
+ i = pfc_config(link);
+ else if (info->multi > 1)
i = multi_config(link);
else
i = simple_config(link);
@@ -704,7 +714,7 @@ static int serial_config(struct pcmcia_device * link)
return 0;
failed:
- dev_warn(&link->dev, "serial_cs: failed to initialize\n");
+ dev_warn(&link->dev, "failed to initialize\n");
serial_remove(link);
return -ENODEV;
}
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index 7e5e5efea4e2..cff9a306660f 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -492,7 +492,7 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
sysrq_requested = 0;
if (ch && time_before(jiffies, sysrq_timeout)) {
spin_unlock_irqrestore(&port->sc_port.lock, flags);
- handle_sysrq(ch, NULL);
+ handle_sysrq(ch);
spin_lock_irqsave(&port->sc_port.lock, flags);
/* ignore actual sysrq command char */
continue;
diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c
index 544f2e25d0e5..6381a0282ee7 100644
--- a/drivers/serial/suncore.c
+++ b/drivers/serial/suncore.c
@@ -55,7 +55,12 @@ EXPORT_SYMBOL(sunserial_unregister_minors);
int sunserial_console_match(struct console *con, struct device_node *dp,
struct uart_driver *drv, int line, bool ignore_line)
{
- if (!con || of_console_device != dp)
+ if (!con)
+ return 0;
+
+ drv->cons = con;
+
+ if (of_console_device != dp)
return 0;
if (!ignore_line) {
@@ -69,12 +74,10 @@ int sunserial_console_match(struct console *con, struct device_node *dp,
return 0;
}
- con->index = line;
- drv->cons = con;
-
- if (!console_set_on_cmdline)
+ if (!console_set_on_cmdline) {
+ con->index = line;
add_preferred_console(con->name, line, NULL);
-
+ }
return 1;
}
EXPORT_SYMBOL(sunserial_console_match);
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.