aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/8250.c10
-rw-r--r--drivers/serial/8250_gsc.c6
-rw-r--r--drivers/serial/amba-pl010.c1
-rw-r--r--drivers/serial/amba-pl011.c1
-rw-r--r--drivers/serial/clps711x.c9
-rw-r--r--drivers/serial/imx.c8
-rw-r--r--drivers/serial/mpc52xx_uart.c8
-rw-r--r--drivers/serial/mux.c11
-rw-r--r--drivers/serial/pxa.c29
-rw-r--r--drivers/serial/s3c2410.c9
-rw-r--r--drivers/serial/sa1100.c8
-rw-r--r--drivers/serial/vr41xx_siu.c10
12 files changed, 65 insertions, 45 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 4d75cdfa0a0a..afb7ddf200e0 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2358,13 +2358,10 @@ static int __devexit serial8250_remove(struct device *dev)
return 0;
}
-static int serial8250_suspend(struct device *dev, pm_message_t state, u32 level)
+static int serial8250_suspend(struct device *dev, pm_message_t state)
{
int i;
- if (level != SUSPEND_DISABLE)
- return 0;
-
for (i = 0; i < UART_NR; i++) {
struct uart_8250_port *up = &serial8250_ports[i];
@@ -2375,13 +2372,10 @@ static int serial8250_suspend(struct device *dev, pm_message_t state, u32 level)
return 0;
}
-static int serial8250_resume(struct device *dev, u32 level)
+static int serial8250_resume(struct device *dev)
{
int i;
- if (level != RESUME_ENABLE)
- return 0;
-
for (i = 0; i < UART_NR; i++) {
struct uart_8250_port *up = &serial8250_ports[i];
diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 431aa5761a7a..8b4947933d9b 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -29,7 +29,6 @@
static int __init
serial_init_chip(struct parisc_device *dev)
{
- static int serial_line_nr;
struct uart_port port;
unsigned long address;
int err;
@@ -42,12 +41,13 @@ serial_init_chip(struct parisc_device *dev)
*/
if (parisc_parent(dev)->id.hw_type != HPHW_IOA) {
printk(KERN_INFO "Serial: device 0x%lx not configured.\n"
- "Enable support for Wax, Lasi, Asp or Dino.\n", dev->hpa);
+ "Enable support for Wax, Lasi, Asp or Dino.\n",
+ dev->hpa.start);
}
return -ENODEV;
}
- address = dev->hpa;
+ address = dev->hpa.start;
if (dev->id.sversion != 0x8d) {
address += 0x800;
}
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 679e678c7e6a..ddd0307fece2 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -50,6 +50,7 @@
#include <asm/io.h>
#include <asm/irq.h>
+#include <asm/hardware.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/amba_serial.h>
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 1ff629c74750..938d185841c9 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -50,6 +50,7 @@
#include <asm/io.h>
#include <asm/irq.h>
+#include <asm/sizes.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/clock.h>
#include <asm/hardware/amba_serial.h>
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 87ef368384fb..6a67e8f585b3 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -408,7 +408,11 @@ static struct uart_port clps711x_ports[UART_NR] = {
{
.iobase = SYSCON1,
.irq = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */
+#ifdef CONFIG_MP1000_90MHZ
+ .uartclk = 4515840,
+#else
.uartclk = 3686400,
+#endif
.fifosize = 16,
.ops = &clps711x_pops,
.line = 0,
@@ -417,7 +421,11 @@ static struct uart_port clps711x_ports[UART_NR] = {
{
.iobase = SYSCON2,
.irq = IRQ_UTXINT2, /* IRQ_URXINT2 */
+#ifdef CONFIG_MP1000_90MHZ
+ .uartclk = 4515840,
+#else
.uartclk = 3686400,
+#endif
.fifosize = 16,
.ops = &clps711x_pops,
.line = 1,
@@ -551,6 +559,7 @@ console_initcall(clps711xuart_console_init);
static struct uart_driver clps711x_reg = {
.driver_name = "ttyCL",
.dev_name = "ttyCL",
+ .devfs_name = "ttyCL",
.major = SERIAL_CLPS711X_MAJOR,
.minor = SERIAL_CLPS711X_MINOR,
.nr = UART_NR,
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index bdb4e454b8b0..5b3933b0c997 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -921,21 +921,21 @@ static struct uart_driver imx_reg = {
.cons = IMX_CONSOLE,
};
-static int serial_imx_suspend(struct device *_dev, pm_message_t state, u32 level)
+static int serial_imx_suspend(struct device *_dev, pm_message_t state)
{
struct imx_port *sport = dev_get_drvdata(_dev);
- if (sport && level == SUSPEND_DISABLE)
+ if (sport)
uart_suspend_port(&imx_reg, &sport->port);
return 0;
}
-static int serial_imx_resume(struct device *_dev, u32 level)
+static int serial_imx_resume(struct device *_dev)
{
struct imx_port *sport = dev_get_drvdata(_dev);
- if (sport && level == RESUME_ENABLE)
+ if (sport)
uart_resume_port(&imx_reg, &sport->port);
return 0;
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 0585ab27ffde..8a79968f8ce1 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -781,22 +781,22 @@ mpc52xx_uart_remove(struct device *dev)
#ifdef CONFIG_PM
static int
-mpc52xx_uart_suspend(struct device *dev, pm_message_t state, u32 level)
+mpc52xx_uart_suspend(struct device *dev, pm_message_t state)
{
struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev);
- if (sport && level == SUSPEND_DISABLE)
+ if (sport)
uart_suspend_port(&mpc52xx_uart_driver, port);
return 0;
}
static int
-mpc52xx_uart_resume(struct device *dev, u32 level)
+mpc52xx_uart_resume(struct device *dev)
{
struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev);
- if (port && level == RESUME_ENABLE)
+ if (port)
uart_resume_port(&mpc52xx_uart_driver, port);
return 0;
diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index 189064607709..660bae5ba179 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -27,6 +27,7 @@
#include <linux/delay.h> /* for udelay */
#include <linux/device.h>
#include <asm/io.h>
+#include <asm/irq.h>
#include <asm/parisc-device.h>
#ifdef CONFIG_MAGIC_SYSRQ
@@ -444,7 +445,7 @@ static int __init mux_probe(struct parisc_device *dev)
unsigned long bytecnt;
struct uart_port *port;
- status = pdc_iodc_read(&bytecnt, dev->hpa, 0, iodc_data, 32);
+ status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32);
if(status != PDC_OK) {
printk(KERN_ERR "Serial mux: Unable to read IODC.\n");
return 1;
@@ -469,16 +470,18 @@ static int __init mux_probe(struct parisc_device *dev)
for(i = 0; i < ports; ++i, ++port_cnt) {
port = &mux_ports[port_cnt];
port->iobase = 0;
- port->mapbase = dev->hpa + MUX_OFFSET + (i * MUX_LINE_OFFSET);
+ port->mapbase = dev->hpa.start + MUX_OFFSET +
+ (i * MUX_LINE_OFFSET);
port->membase = ioremap(port->mapbase, MUX_LINE_OFFSET);
port->iotype = SERIAL_IO_MEM;
port->type = PORT_MUX;
- port->irq = SERIAL_IRQ_NONE;
+ port->irq = NO_IRQ;
port->uartclk = 0;
port->fifosize = MUX_FIFO_SIZE;
port->ops = &mux_pops;
port->flags = UPF_BOOT_AUTOCONF;
port->line = port_cnt;
+ spin_lock_init(&port->lock);
status = uart_add_one_port(&mux_driver, port);
BUG_ON(status);
}
@@ -497,7 +500,7 @@ static struct parisc_device_id mux_tbl[] = {
MODULE_DEVICE_TABLE(parisc, mux_tbl);
static struct parisc_driver serial_mux_driver = {
- .name = "Serial MUX",
+ .name = "serial_mux",
.id_table = mux_tbl,
.probe = mux_probe,
};
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 90c2a86c421b..8cc4cedadd99 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -358,6 +358,9 @@ static int serial_pxa_startup(struct uart_port *port)
unsigned long flags;
int retval;
+ if (port->line == 3) /* HWUART */
+ up->mcr |= UART_MCR_AFE;
+ else
up->mcr = 0;
/*
@@ -481,8 +484,10 @@ serial_pxa_set_termios(struct uart_port *port, struct termios *termios,
if ((up->port.uartclk / quot) < (2400 * 16))
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1;
- else
+ else if ((up->port.uartclk / quot) < (230400 * 16))
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8;
+ else
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32;
/*
* Ok, we're now changing the port state. Do it with
@@ -772,6 +777,20 @@ static struct uart_pxa_port serial_pxa_ports[] = {
.ops = &serial_pxa_pops,
.line = 2,
},
+ }, { /* HWUART */
+ .name = "HWUART",
+ .cken = CKEN4_HWUART,
+ .port = {
+ .type = PORT_PXA,
+ .iotype = UPIO_MEM,
+ .membase = (void *)&HWUART,
+ .mapbase = __PREG(HWUART),
+ .irq = IRQ_HWUART,
+ .uartclk = 921600 * 16,
+ .fifosize = 64,
+ .ops = &serial_pxa_pops,
+ .line = 3,
+ },
}
};
@@ -786,21 +805,21 @@ static struct uart_driver serial_pxa_reg = {
.cons = PXA_CONSOLE,
};
-static int serial_pxa_suspend(struct device *_dev, pm_message_t state, u32 level)
+static int serial_pxa_suspend(struct device *_dev, pm_message_t state)
{
struct uart_pxa_port *sport = dev_get_drvdata(_dev);
- if (sport && level == SUSPEND_DISABLE)
+ if (sport)
uart_suspend_port(&serial_pxa_reg, &sport->port);
return 0;
}
-static int serial_pxa_resume(struct device *_dev, u32 level)
+static int serial_pxa_resume(struct device *_dev)
{
struct uart_pxa_port *sport = dev_get_drvdata(_dev);
- if (sport && level == RESUME_ENABLE)
+ if (sport)
uart_resume_port(&serial_pxa_reg, &sport->port);
return 0;
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 52692aa345ec..06a17dff1a73 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -1134,23 +1134,22 @@ static int s3c24xx_serial_remove(struct device *_dev)
#ifdef CONFIG_PM
-static int s3c24xx_serial_suspend(struct device *dev, pm_message_t state,
- u32 level)
+static int s3c24xx_serial_suspend(struct device *dev, pm_message_t state)
{
struct uart_port *port = s3c24xx_dev_to_port(dev);
- if (port && level == SUSPEND_DISABLE)
+ if (port)
uart_suspend_port(&s3c24xx_uart_drv, port);
return 0;
}
-static int s3c24xx_serial_resume(struct device *dev, u32 level)
+static int s3c24xx_serial_resume(struct device *dev)
{
struct uart_port *port = s3c24xx_dev_to_port(dev);
struct s3c24xx_uart_port *ourport = to_ourport(port);
- if (port && level == RESUME_ENABLE) {
+ if (port) {
clk_enable(ourport->clk);
s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
clk_disable(ourport->clk);
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index dd8aed242357..c4a789e6af44 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -834,21 +834,21 @@ static struct uart_driver sa1100_reg = {
.cons = SA1100_CONSOLE,
};
-static int sa1100_serial_suspend(struct device *_dev, pm_message_t state, u32 level)
+static int sa1100_serial_suspend(struct device *_dev, pm_message_t state)
{
struct sa1100_port *sport = dev_get_drvdata(_dev);
- if (sport && level == SUSPEND_DISABLE)
+ if (sport)
uart_suspend_port(&sa1100_reg, &sport->port);
return 0;
}
-static int sa1100_serial_resume(struct device *_dev, u32 level)
+static int sa1100_serial_resume(struct device *_dev)
{
struct sa1100_port *sport = dev_get_drvdata(_dev);
- if (sport && level == RESUME_ENABLE)
+ if (sport)
uart_resume_port(&sa1100_reg, &sport->port);
return 0;
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index 0c5d65a08f6e..2b623ab0e36e 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -976,14 +976,11 @@ static int siu_remove(struct device *dev)
return 0;
}
-static int siu_suspend(struct device *dev, pm_message_t state, u32 level)
+static int siu_suspend(struct device *dev, pm_message_t state)
{
struct uart_port *port;
int i;
- if (level != SUSPEND_DISABLE)
- return 0;
-
for (i = 0; i < siu_uart_driver.nr; i++) {
port = &siu_uart_ports[i];
if ((port->type == PORT_VR41XX_SIU ||
@@ -995,14 +992,11 @@ static int siu_suspend(struct device *dev, pm_message_t state, u32 level)
return 0;
}
-static int siu_resume(struct device *dev, u32 level)
+static int siu_resume(struct device *dev)
{
struct uart_port *port;
int i;
- if (level != RESUME_ENABLE)
- return 0;
-
for (i = 0; i < siu_uart_driver.nr; i++) {
port = &siu_uart_ports[i];
if ((port->type == PORT_VR41XX_SIU ||
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.