diff options
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/8250.c | 15 | ||||
| -rw-r--r-- | drivers/serial/8250_pci.c | 36 |
2 files changed, 51 insertions, 0 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 0d934bfbdd9b..b4b39811b445 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2083,6 +2083,20 @@ static int serial8250_startup(struct uart_port *port) serial8250_set_mctrl(&up->port, up->port.mctrl); + /* Serial over Lan (SoL) hack: + Intel 8257x Gigabit ethernet chips have a + 16550 emulation, to be used for Serial Over Lan. + Those chips take a longer time than a normal + serial device to signalize that a transmission + data was queued. Due to that, the above test generally + fails. One solution would be to delay the reading of + iir. However, this is not reliable, since the timeout + is variable. So, let's just don't test if we receive + TX irq. This way, we'll never enable UART_BUG_TXEN. + */ + if (up->port.flags & UPF_NO_TXEN_TEST) + goto dont_test_tx_en; + /* * Do a quick test to see if we receive an * interrupt when we enable the TX irq. @@ -2102,6 +2116,7 @@ static int serial8250_startup(struct uart_port *port) up->bugs &= ~UART_BUG_TXEN; } +dont_test_tx_en: spin_unlock_irqrestore(&up->port.lock, flags); /* diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 536d8e510f66..533f82025adf 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -798,6 +798,21 @@ pci_default_setup(struct serial_private *priv, return setup_port(priv, port, bar, offset, board->reg_shift); } +static int skip_tx_en_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + port->flags |= UPF_NO_TXEN_TEST; + printk(KERN_DEBUG "serial8250: skipping TxEn test for device " + "[%04x:%04x] subsystem [%04x:%04x]\n", + priv->dev->vendor, + priv->dev->device, + priv->dev->subsystem_vendor, + priv->dev->subsystem_device); + + return pci_default_setup(priv, board, port, idx); +} + /* This should be in linux/pci_ids.h */ #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B @@ -864,6 +879,27 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .init = pci_inteli960ni_init, .setup = pci_default_setup, }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_8257X_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82573L_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82573E_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, /* * ITE */ |