aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/soc/imx/imx8m-blk-ctrl.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/soc/imx/imx8m-blk-ctrl.c')
-rw-r--r--drivers/soc/imx/imx8m-blk-ctrl.c96
1 files changed, 95 insertions, 1 deletions
diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
index 519b3651d1d9..511e74f0db8a 100644
--- a/drivers/soc/imx/imx8m-blk-ctrl.c
+++ b/drivers/soc/imx/imx8m-blk-ctrl.c
@@ -14,9 +14,11 @@
#include <linux/clk.h>
#include <dt-bindings/power/imx8mm-power.h>
+#include <dt-bindings/power/imx8mn-power.h>
#define BLK_SFT_RSTN 0x0
#define BLK_CLK_EN 0x4
+#define BLK_MIPI_RESET_DIV 0x8 /* Mini/Nano DISPLAY_BLK_CTRL only */
struct imx8m_blk_ctrl_domain;
@@ -36,6 +38,15 @@ struct imx8m_blk_ctrl_domain_data {
const char *gpc_name;
u32 rst_mask;
u32 clk_mask;
+
+ /*
+ * i.MX8M Mini and Nano have a third DISPLAY_BLK_CTRL register
+ * which is used to control the reset for the MIPI Phy.
+ * Since it's only present in certain circumstances,
+ * an if-statement should be used before setting and clearing this
+ * register.
+ */
+ u32 mipi_phy_rst_mask;
};
#define DOMAIN_MAX_CLKS 3
@@ -78,6 +89,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
/* put devices into reset */
regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
+ if (data->mipi_phy_rst_mask)
+ regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
/* enable upstream and blk-ctrl clocks to allow reset to propagate */
ret = clk_bulk_prepare_enable(data->num_clks, domain->clks);
@@ -99,6 +112,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
/* release reset */
regmap_set_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
+ if (data->mipi_phy_rst_mask)
+ regmap_set_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
/* disable upstream clocks */
clk_bulk_disable_unprepare(data->num_clks, domain->clks);
@@ -120,6 +135,9 @@ static int imx8m_blk_ctrl_power_off(struct generic_pm_domain *genpd)
struct imx8m_blk_ctrl *bc = domain->bc;
/* put devices into reset and disable clocks */
+ if (data->mipi_phy_rst_mask)
+ regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
+
regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
regmap_clear_bits(bc->regmap, BLK_CLK_EN, data->clk_mask);
@@ -480,6 +498,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mm_disp_blk_ctl_domain_data[]
.gpc_name = "mipi-dsi",
.rst_mask = BIT(5),
.clk_mask = BIT(8) | BIT(9),
+ .mipi_phy_rst_mask = BIT(17),
},
[IMX8MM_DISPBLK_PD_MIPI_CSI] = {
.name = "dispblk-mipi-csi",
@@ -488,6 +507,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mm_disp_blk_ctl_domain_data[]
.gpc_name = "mipi-csi",
.rst_mask = BIT(3) | BIT(4),
.clk_mask = BIT(10) | BIT(11),
+ .mipi_phy_rst_mask = BIT(16),
},
};
@@ -498,6 +518,77 @@ static const struct imx8m_blk_ctrl_data imx8mm_disp_blk_ctl_dev_data = {
.num_domains = ARRAY_SIZE(imx8mm_disp_blk_ctl_domain_data),
};
+
+static int imx8mn_disp_power_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
+ power_nb);
+
+ if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)
+ return NOTIFY_OK;
+
+ /* Enable bus clock and deassert bus reset */
+ regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(8));
+ regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(8));
+
+ /*
+ * On power up we have no software backchannel to the GPC to
+ * wait for the ADB handshake to happen, so we just delay for a
+ * bit. On power down the GPC driver waits for the handshake.
+ */
+ if (action == GENPD_NOTIFY_ON)
+ udelay(5);
+
+
+ return NOTIFY_OK;
+}
+
+static const struct imx8m_blk_ctrl_domain_data imx8mn_disp_blk_ctl_domain_data[] = {
+ [IMX8MN_DISPBLK_PD_MIPI_DSI] = {
+ .name = "dispblk-mipi-dsi",
+ .clk_names = (const char *[]){ "dsi-pclk", "dsi-ref", },
+ .num_clks = 2,
+ .gpc_name = "mipi-dsi",
+ .rst_mask = BIT(0) | BIT(1),
+ .clk_mask = BIT(0) | BIT(1),
+ .mipi_phy_rst_mask = BIT(17),
+ },
+ [IMX8MN_DISPBLK_PD_MIPI_CSI] = {
+ .name = "dispblk-mipi-csi",
+ .clk_names = (const char *[]){ "csi-aclk", "csi-pclk" },
+ .num_clks = 2,
+ .gpc_name = "mipi-csi",
+ .rst_mask = BIT(2) | BIT(3),
+ .clk_mask = BIT(2) | BIT(3),
+ .mipi_phy_rst_mask = BIT(16),
+ },
+ [IMX8MN_DISPBLK_PD_LCDIF] = {
+ .name = "dispblk-lcdif",
+ .clk_names = (const char *[]){ "lcdif-axi", "lcdif-apb", "lcdif-pix", },
+ .num_clks = 3,
+ .gpc_name = "lcdif",
+ .rst_mask = BIT(4) | BIT(5),
+ .clk_mask = BIT(4) | BIT(5),
+ },
+ [IMX8MN_DISPBLK_PD_ISI] = {
+ .name = "dispblk-isi",
+ .clk_names = (const char *[]){ "disp_axi", "disp_apb", "disp_axi_root",
+ "disp_apb_root"},
+ .num_clks = 4,
+ .gpc_name = "isi",
+ .rst_mask = BIT(6) | BIT(7),
+ .clk_mask = BIT(6) | BIT(7),
+ },
+};
+
+static const struct imx8m_blk_ctrl_data imx8mn_disp_blk_ctl_dev_data = {
+ .max_reg = 0x84,
+ .power_notifier_fn = imx8mn_disp_power_notifier,
+ .domains = imx8mn_disp_blk_ctl_domain_data,
+ .num_domains = ARRAY_SIZE(imx8mn_disp_blk_ctl_domain_data),
+};
+
static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
{
.compatible = "fsl,imx8mm-vpu-blk-ctrl",
@@ -505,7 +596,10 @@ static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
}, {
.compatible = "fsl,imx8mm-disp-blk-ctrl",
.data = &imx8mm_disp_blk_ctl_dev_data
- } ,{
+ }, {
+ .compatible = "fsl,imx8mn-disp-blk-ctrl",
+ .data = &imx8mn_disp_blk_ctl_dev_data
+ }, {
/* Sentinel */
}
};