diff options
Diffstat (limited to 'drivers/soc/kendryte/k210-sysctl.c')
| -rw-r--r-- | drivers/soc/kendryte/k210-sysctl.c | 260 |
1 files changed, 0 insertions, 260 deletions
diff --git a/drivers/soc/kendryte/k210-sysctl.c b/drivers/soc/kendryte/k210-sysctl.c deleted file mode 100644 index 707019223dd8..000000000000 --- a/drivers/soc/kendryte/k210-sysctl.c +++ /dev/null @@ -1,260 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (c) 2019 Christoph Hellwig. - * Copyright (c) 2019 Western Digital Corporation or its affiliates. - */ -#include <linux/types.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/platform_device.h> -#include <linux/clk-provider.h> -#include <linux/clkdev.h> -#include <linux/bitfield.h> -#include <asm/soc.h> - -#define K210_SYSCTL_CLK0_FREQ 26000000UL - -/* Registers base address */ -#define K210_SYSCTL_SYSCTL_BASE_ADDR 0x50440000ULL - -/* Registers */ -#define K210_SYSCTL_PLL0 0x08 -#define K210_SYSCTL_PLL1 0x0c -/* clkr: 4bits, clkf1: 6bits, clkod: 4bits, bwadj: 4bits */ -#define PLL_RESET (1 << 20) -#define PLL_PWR (1 << 21) -#define PLL_INTFB (1 << 22) -#define PLL_BYPASS (1 << 23) -#define PLL_TEST (1 << 24) -#define PLL_OUT_EN (1 << 25) -#define PLL_TEST_EN (1 << 26) -#define K210_SYSCTL_PLL_LOCK 0x18 -#define PLL0_LOCK1 (1 << 0) -#define PLL0_LOCK2 (1 << 1) -#define PLL0_SLIP_CLEAR (1 << 2) -#define PLL0_TEST_CLK_OUT (1 << 3) -#define PLL1_LOCK1 (1 << 8) -#define PLL1_LOCK2 (1 << 9) -#define PLL1_SLIP_CLEAR (1 << 10) -#define PLL1_TEST_CLK_OUT (1 << 11) -#define PLL2_LOCK1 (1 << 16) -#define PLL2_LOCK2 (1 << 16) -#define PLL2_SLIP_CLEAR (1 << 18) -#define PLL2_TEST_CLK_OUT (1 << 19) -#define K210_SYSCTL_CLKSEL0 0x20 -#define CLKSEL_ACLK (1 << 0) -#define K210_SYSCTL_CLKEN_CENT 0x28 -#define CLKEN_CPU (1 << 0) -#define CLKEN_SRAM0 (1 << 1) -#define CLKEN_SRAM1 (1 << 2) -#define CLKEN_APB0 (1 << 3) -#define CLKEN_APB1 (1 << 4) -#define CLKEN_APB2 (1 << 5) -#define K210_SYSCTL_CLKEN_PERI 0x2c -#define CLKEN_ROM (1 << 0) -#define CLKEN_DMA (1 << 1) -#define CLKEN_AI (1 << 2) -#define CLKEN_DVP (1 << 3) -#define CLKEN_FFT (1 << 4) -#define CLKEN_GPIO (1 << 5) -#define CLKEN_SPI0 (1 << 6) -#define CLKEN_SPI1 (1 << 7) -#define CLKEN_SPI2 (1 << 8) -#define CLKEN_SPI3 (1 << 9) -#define CLKEN_I2S0 (1 << 10) -#define CLKEN_I2S1 (1 << 11) -#define CLKEN_I2S2 (1 << 12) -#define CLKEN_I2C0 (1 << 13) -#define CLKEN_I2C1 (1 << 14) -#define CLKEN_I2C2 (1 << 15) -#define CLKEN_UART1 (1 << 16) -#define CLKEN_UART2 (1 << 17) -#define CLKEN_UART3 (1 << 18) -#define CLKEN_AES (1 << 19) -#define CLKEN_FPIO (1 << 20) -#define CLKEN_TIMER0 (1 << 21) -#define CLKEN_TIMER1 (1 << 22) -#define CLKEN_TIMER2 (1 << 23) -#define CLKEN_WDT0 (1 << 24) -#define CLKEN_WDT1 (1 << 25) -#define CLKEN_SHA (1 << 26) -#define CLKEN_OTP (1 << 27) -#define CLKEN_RTC (1 << 29) - -struct k210_sysctl { - void __iomem *regs; - struct clk_hw hw; -}; - -static void k210_set_bits(u32 val, void __iomem *reg) -{ - writel(readl(reg) | val, reg); -} - -static void k210_clear_bits(u32 val, void __iomem *reg) -{ - writel(readl(reg) & ~val, reg); -} - -static void k210_pll1_enable(void __iomem *regs) -{ - u32 val; - - val = readl(regs + K210_SYSCTL_PLL1); - val &= ~GENMASK(19, 0); /* clkr1 = 0 */ - val |= FIELD_PREP(GENMASK(9, 4), 0x3B); /* clkf1 = 59 */ - val |= FIELD_PREP(GENMASK(13, 10), 0x3); /* clkod1 = 3 */ - val |= FIELD_PREP(GENMASK(19, 14), 0x3B); /* bwadj1 = 59 */ - writel(val, regs + K210_SYSCTL_PLL1); - - k210_clear_bits(PLL_BYPASS, regs + K210_SYSCTL_PLL1); - k210_set_bits(PLL_PWR, regs + K210_SYSCTL_PLL1); - - /* - * Reset the pll. The magic NOPs come from the Kendryte reference SDK. - */ - k210_clear_bits(PLL_RESET, regs + K210_SYSCTL_PLL1); - k210_set_bits(PLL_RESET, regs + K210_SYSCTL_PLL1); - nop(); - nop(); - k210_clear_bits(PLL_RESET, regs + K210_SYSCTL_PLL1); - - for (;;) { - val = readl(regs + K210_SYSCTL_PLL_LOCK); - if (val & PLL1_LOCK2) - break; - writel(val | PLL1_SLIP_CLEAR, regs + K210_SYSCTL_PLL_LOCK); - } - - k210_set_bits(PLL_OUT_EN, regs + K210_SYSCTL_PLL1); -} - -static unsigned long k210_sysctl_clk_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct k210_sysctl *s = container_of(hw, struct k210_sysctl, hw); - u32 clksel0, pll0; - u64 pll0_freq, clkr0, clkf0, clkod0; - - /* - * If the clock selector is not set, use the base frequency. - * Otherwise, use PLL0 frequency with a frequency divisor. - */ - clksel0 = readl(s->regs + K210_SYSCTL_CLKSEL0); - if (!(clksel0 & CLKSEL_ACLK)) - return K210_SYSCTL_CLK0_FREQ; - - /* - * Get PLL0 frequency: - * freq = base frequency * clkf0 / (clkr0 * clkod0) - */ - pll0 = readl(s->regs + K210_SYSCTL_PLL0); - clkr0 = 1 + FIELD_GET(GENMASK(3, 0), pll0); - clkf0 = 1 + FIELD_GET(GENMASK(9, 4), pll0); - clkod0 = 1 + FIELD_GET(GENMASK(13, 10), pll0); - pll0_freq = clkf0 * K210_SYSCTL_CLK0_FREQ / (clkr0 * clkod0); - - /* Get the frequency divisor from the clock selector */ - return pll0_freq / (2ULL << FIELD_GET(0x00000006, clksel0)); -} - -static const struct clk_ops k210_sysctl_clk_ops = { - .recalc_rate = k210_sysctl_clk_recalc_rate, -}; - -static const struct clk_init_data k210_clk_init_data = { - .name = "k210-sysctl-pll1", - .ops = &k210_sysctl_clk_ops, -}; - -static int k210_sysctl_probe(struct platform_device *pdev) -{ - struct k210_sysctl *s; - int error; - - pr_info("Kendryte K210 SoC sysctl\n"); - - s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL); - if (!s) - return -ENOMEM; - - s->regs = devm_ioremap_resource(&pdev->dev, - platform_get_resource(pdev, IORESOURCE_MEM, 0)); - if (IS_ERR(s->regs)) - return PTR_ERR(s->regs); - - s->hw.init = &k210_clk_init_data; - error = devm_clk_hw_register(&pdev->dev, &s->hw); - if (error) { - dev_err(&pdev->dev, "failed to register clk"); - return error; - } - - error = devm_of_clk_add_hw_provider(&pdev->dev, of_clk_hw_simple_get, - &s->hw); - if (error) { - dev_err(&pdev->dev, "adding clk provider failed\n"); - return error; - } - - return 0; -} - -static const struct of_device_id k210_sysctl_of_match[] = { - { .compatible = "kendryte,k210-sysctl", }, - {} -}; - -static struct platform_driver k210_sysctl_driver = { - .driver = { - .name = "k210-sysctl", - .of_match_table = k210_sysctl_of_match, - }, - .probe = k210_sysctl_probe, -}; - -static int __init k210_sysctl_init(void) -{ - return platform_driver_register(&k210_sysctl_driver); -} -core_initcall(k210_sysctl_init); - -/* - * This needs to be called very early during initialization, given that - * PLL1 needs to be enabled to be able to use all SRAM. - */ -static void __init k210_soc_early_init(const void *fdt) -{ - void __iomem *regs; - - regs = ioremap(K210_SYSCTL_SYSCTL_BASE_ADDR, 0x1000); - if (!regs) - panic("K210 sysctl ioremap"); - - /* Enable PLL1 to make the KPU SRAM useable */ - k210_pll1_enable(regs); - - k210_set_bits(PLL_OUT_EN, regs + K210_SYSCTL_PLL0); - - k210_set_bits(CLKEN_CPU | CLKEN_SRAM0 | CLKEN_SRAM1, - regs + K210_SYSCTL_CLKEN_CENT); - k210_set_bits(CLKEN_ROM | CLKEN_TIMER0 | CLKEN_RTC, - regs + K210_SYSCTL_CLKEN_PERI); - - k210_set_bits(CLKSEL_ACLK, regs + K210_SYSCTL_CLKSEL0); - - iounmap(regs); -} -SOC_EARLY_INIT_DECLARE(generic_k210, "kendryte,k210", k210_soc_early_init); - -#ifdef CONFIG_SOC_KENDRYTE_K210_DTB_BUILTIN -/* - * Generic entry for the default k210.dtb embedded DTB for boards with: - * - Vendor ID: 0x4B5 - * - Arch ID: 0xE59889E6A5A04149 (= "Canaan AI" in UTF-8 encoded Chinese) - * - Impl ID: 0x4D41495832303030 (= "MAIX2000") - * These values are reported by the SiPEED MAXDUINO, SiPEED MAIX GO and - * SiPEED Dan dock boards. - */ -SOC_BUILTIN_DTB_DECLARE(k210, 0x4B5, 0xE59889E6A5A04149, 0x4D41495832303030); -#endif |