diff options
Diffstat (limited to 'drivers/soc')
-rw-r--r-- | drivers/soc/Kconfig | 1 | ||||
-rw-r--r-- | drivers/soc/Makefile | 2 | ||||
-rw-r--r-- | drivers/soc/dove/pmu.c | 43 | ||||
-rw-r--r-- | drivers/soc/fsl/Makefile | 6 | ||||
-rw-r--r-- | drivers/soc/fsl/qe/Kconfig | 38 | ||||
-rw-r--r-- | drivers/soc/fsl/qe/Makefile | 10 | ||||
-rw-r--r-- | drivers/soc/fsl/qe/gpio.c | 317 | ||||
-rw-r--r-- | drivers/soc/fsl/qe/qe.c | 719 | ||||
-rw-r--r-- | drivers/soc/fsl/qe/qe_common.c | 235 | ||||
-rw-r--r-- | drivers/soc/fsl/qe/qe_ic.c | 503 | ||||
-rw-r--r-- | drivers/soc/fsl/qe/qe_ic.h | 103 | ||||
-rw-r--r-- | drivers/soc/fsl/qe/qe_io.c | 192 | ||||
-rw-r--r-- | drivers/soc/fsl/qe/ucc.c | 212 | ||||
-rw-r--r-- | drivers/soc/fsl/qe/ucc_fast.c | 363 | ||||
-rw-r--r-- | drivers/soc/fsl/qe/ucc_slow.c | 374 | ||||
-rw-r--r-- | drivers/soc/fsl/qe/usb.c | 56 | ||||
-rw-r--r-- | drivers/soc/qcom/spm.c | 10 | ||||
-rw-r--r-- | drivers/soc/ti/knav_dma.c | 2 | ||||
-rw-r--r-- | drivers/soc/versatile/soc-realview.c | 4 |
19 files changed, 3184 insertions, 6 deletions
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig index 844142620031..fb2b3935b658 100644 --- a/drivers/soc/Kconfig +++ b/drivers/soc/Kconfig @@ -2,6 +2,7 @@ menu "SOC (System On Chip) specific Drivers" source "drivers/soc/bcm/Kconfig" source "drivers/soc/brcmstb/Kconfig" +source "drivers/soc/fsl/qe/Kconfig" source "drivers/soc/mediatek/Kconfig" source "drivers/soc/qcom/Kconfig" source "drivers/soc/rockchip/Kconfig" diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile index f3f955cdb04b..2afdc74f7491 100644 --- a/drivers/soc/Makefile +++ b/drivers/soc/Makefile @@ -4,7 +4,9 @@ obj-y += bcm/ obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/ +obj-$(CONFIG_ARCH_DOVE) += dove/ obj-$(CONFIG_MACH_DOVE) += dove/ +obj-y += fsl/ obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/ obj-$(CONFIG_ARCH_QCOM) += qcom/ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ diff --git a/drivers/soc/dove/pmu.c b/drivers/soc/dove/pmu.c index abd087917f80..039374e9fdc0 100644 --- a/drivers/soc/dove/pmu.c +++ b/drivers/soc/dove/pmu.c @@ -305,6 +305,49 @@ static int __init dove_init_pmu_irq(struct pmu_data *pmu, int irq) return 0; } +int __init dove_init_pmu_legacy(const struct dove_pmu_initdata *initdata) +{ + const struct dove_pmu_domain_initdata *domain_initdata; + struct pmu_data *pmu; + int ret; + + pmu = kzalloc(sizeof(*pmu), GFP_KERNEL); + if (!pmu) + return -ENOMEM; + + spin_lock_init(&pmu->lock); + pmu->pmc_base = initdata->pmc_base; + pmu->pmu_base = initdata->pmu_base; + + pmu_reset_init(pmu); + for (domain_initdata = initdata->domains; domain_initdata->name; + domain_initdata++) { + struct pmu_domain *domain; + + domain = kzalloc(sizeof(*domain), GFP_KERNEL); + if (domain) { + domain->pmu = pmu; + domain->pwr_mask = domain_initdata->pwr_mask; + domain->rst_mask = domain_initdata->rst_mask; + domain->iso_mask = domain_initdata->iso_mask; + domain->base.name = domain_initdata->name; + + __pmu_domain_register(domain, NULL); + } + } + + ret = dove_init_pmu_irq(pmu, initdata->irq); + if (ret) + pr_err("dove_init_pmu_irq() failed: %d\n", ret); + + if (pmu->irq_domain) + irq_domain_associate_many(pmu->irq_domain, + initdata->irq_domain_start, + 0, NR_PMU_IRQS); + + return 0; +} + /* * pmu: power-manager@d0000 { * compatible = "marvell,dove-pmu"; diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile new file mode 100644 index 000000000000..203307fd92c1 --- /dev/null +++ b/drivers/soc/fsl/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the Linux Kernel SOC fsl specific device drivers +# + +obj-$(CONFIG_QUICC_ENGINE) += qe/ +obj-$(CONFIG_CPM) += qe/ diff --git a/drivers/soc/fsl/qe/Kconfig b/drivers/soc/fsl/qe/Kconfig new file mode 100644 index 000000000000..20978f2058a6 --- /dev/null +++ b/drivers/soc/fsl/qe/Kconfig @@ -0,0 +1,38 @@ +# +# QE Communication options +# + +config QUICC_ENGINE + bool "Freescale QUICC Engine (QE) Support" + depends on FSL_SOC && PPC32 + select GENERIC_ALLOCATOR + select CRC32 + help + The QUICC Engine (QE) is a new generation of communications + coprocessors on Freescale embedded CPUs (akin to CPM in older chips). + Selecting this option means that you wish to build a kernel + for a machine with a QE coprocessor. + +config UCC_SLOW + bool + default y if SERIAL_QE + help + This option provides qe_lib support to UCC slow + protocols: UART, BISYNC, QMC + +config UCC_FAST + bool + default y if UCC_GETH + help + This option provides qe_lib support to UCC fast + protocols: HDLC, Ethernet, ATM, transparent + +config UCC + bool + default y if UCC_FAST || UCC_SLOW + +config QE_USB + bool + default y if USB_FSL_QE + help + QE USB Controller support diff --git a/drivers/soc/fsl/qe/Makefile b/drivers/soc/fsl/qe/Makefile new file mode 100644 index 000000000000..ffac5410c5c7 --- /dev/null +++ b/drivers/soc/fsl/qe/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the linux ppc-specific parts of QE +# +obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_common.o qe_ic.o qe_io.o +obj-$(CONFIG_CPM) += qe_common.o +obj-$(CONFIG_UCC) += ucc.o +obj-$(CONFIG_UCC_SLOW) += ucc_slow.o +obj-$(CONFIG_UCC_FAST) += ucc_fast.o +obj-$(CONFIG_QE_USB) += usb.o +obj-$(CONFIG_QE_GPIO) += gpio.o diff --git a/drivers/soc/fsl/qe/gpio.c b/drivers/soc/fsl/qe/gpio.c new file mode 100644 index 000000000000..aa5c11acf212 --- /dev/null +++ b/drivers/soc/fsl/qe/gpio.c @@ -0,0 +1,317 @@ +/* + * QUICC Engine GPIOs + * + * Copyright (c) MontaVista Software, Inc. 2008. + * + * Author: Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/gpio.h> +#include <linux/slab.h> +#include <linux/export.h> +#include <soc/fsl/qe/qe.h> + +struct qe_gpio_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + unsigned long pin_flags[QE_PIO_PINS]; +#define QE_PIN_REQUESTED 0 + + /* shadowed data register to clear/set bits safely */ + u32 cpdata; + + /* saved_regs used to restore dedicated functions */ + struct qe_pio_regs saved_regs; +}; + +static inline struct qe_gpio_chip * +to_qe_gpio_chip(struct of_mm_gpio_chip *mm_gc) +{ + return container_of(mm_gc, struct qe_gpio_chip, mm_gc); +} + +static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc); + struct qe_pio_regs __iomem *regs = mm_gc->regs; + + qe_gc->cpdata = in_be32(®s->cpdata); + qe_gc->saved_regs.cpdata = qe_gc->cpdata; + qe_gc->saved_regs.cpdir1 = in_be32(®s->cpdir1); + qe_gc->saved_regs.cpdir2 = in_be32(®s->cpdir2); + qe_gc->saved_regs.cppar1 = in_be32(®s->cppar1); + qe_gc->saved_regs.cppar2 = in_be32(®s->cppar2); + qe_gc->saved_regs.cpodr = in_be32(®s->cpodr); +} + +static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct qe_pio_regs __iomem *regs = mm_gc->regs; + u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio); + + return in_be32(®s->cpdata) & pin_mask; +} + +static void qe_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc); + struct qe_pio_regs __iomem *regs = mm_gc->regs; + unsigned long flags; + u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio); + + spin_lock_irqsave(&qe_gc->lock, flags); + + if (val) + qe_gc->cpdata |= pin_mask; + else + qe_gc->cpdata &= ~pin_mask; + + out_be32(®s->cpdata, qe_gc->cpdata); + + spin_unlock_irqrestore(&qe_gc->lock, flags); +} + +static int qe_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc); + unsigned long flags; + + spin_lock_irqsave(&qe_gc->lock, flags); + + __par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_IN, 0, 0, 0); + + spin_unlock_irqrestore(&qe_gc->lock, flags); + + return 0; +} + +static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc); + unsigned long flags; + + qe_gpio_set(gc, gpio, val); + + spin_lock_irqsave(&qe_gc->lock, flags); + + __par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0); + + spin_unlock_irqrestore(&qe_gc->lock, flags); + + return 0; +} + +struct qe_pin { + /* + * The qe_gpio_chip name is unfortunate, we should change that to + * something like qe_pio_controller. Someday. + */ + struct qe_gpio_chip *controller; + int num; +}; + +/** + * qe_pin_request - Request a QE pin + * @np: device node to get a pin from + * @index: index of a pin in the device tree + * Context: non-atomic + * + * This function return qe_pin so that you could use it with the rest of + * the QE Pin Multiplexing API. + */ +struct qe_pin *qe_pin_request(struct device_node *np, int index) +{ + struct qe_pin *qe_pin; + struct gpio_chip *gc; + struct of_mm_gpio_chip *mm_gc; + struct qe_gpio_chip *qe_gc; + int err; + unsigned long flags; + + qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL); + if (!qe_pin) { + pr_debug("%s: can't allocate memory\n", __func__); + return ERR_PTR(-ENOMEM); + } + + err = of_get_gpio(np, index); + if (err < 0) + goto err0; + gc = gpio_to_chip(err); + if (WARN_ON(!gc)) + goto err0; + + if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) { + pr_debug("%s: tried to get a non-qe pin\n", __func__); + err = -EINVAL; + goto err0; + } + + mm_gc = to_of_mm_gpio_chip(gc); + qe_gc = to_qe_gpio_chip(mm_gc); + + spin_lock_irqsave(&qe_gc->lock, flags); + + err -= gc->base; + if (test_and_set_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[err]) == 0) { + qe_pin->controller = qe_gc; + qe_pin->num = err; + err = 0; + } else { + err = -EBUSY; + } + + spin_unlock_irqrestore(&qe_gc->lock, flags); + + if (!err) + return qe_pin; +err0: + kfree(qe_pin); + pr_debug("%s failed with status %d\n", __func__, err); + return ERR_PTR(err); +} +EXPORT_SYMBOL(qe_pin_request); + +/** + * qe_pin_free - Free a pin + * @qe_pin: pointer to the qe_pin structure + * Context: any + * + * This function frees the qe_pin structure and makes a pin available + * for further qe_pin_request() calls. + */ +void qe_pin_free(struct qe_pin *qe_pin) +{ + struct qe_gpio_chip *qe_gc = qe_pin->controller; + unsigned long flags; + const int pin = qe_pin->num; + + spin_lock_irqsave(&qe_gc->lock, flags); + test_and_clear_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[pin]); + spin_unlock_irqrestore(&qe_gc->lock, flags); + + kfree(qe_pin); +} +EXPORT_SYMBOL(qe_pin_free); + +/** + * qe_pin_set_dedicated - Revert a pin to a dedicated peripheral function mode + * @qe_pin: pointer to the qe_pin structure + * Context: any + * + * This function resets a pin to a dedicated peripheral function that + * has been set up by the firmware. + */ +void qe_pin_set_dedicated(struct qe_pin *qe_pin) +{ + struct qe_gpio_chip *qe_gc = qe_pin->controller; + struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs; + struct qe_pio_regs *sregs = &qe_gc->saved_regs; + int pin = qe_pin->num; + u32 mask1 = 1 << (QE_PIO_PINS - (pin + 1)); + u32 mask2 = 0x3 << (QE_PIO_PINS - (pin % (QE_PIO_PINS / 2) + 1) * 2); + bool second_reg = pin > (QE_PIO_PINS / 2) - 1; + unsigned long flags; + + spin_lock_irqsave(&qe_gc->lock, flags); + + if (second_reg) { + clrsetbits_be32(®s->cpdir2, mask2, sregs->cpdir2 & mask2); + clrsetbits_be32(®s->cppar2, mask2, sregs->cppar2 & mask2); + } else { + clrsetbits_be32(®s->cpdir1, mask2, sregs->cpdir1 & mask2); + clrsetbits_be32(®s->cppar1, mask2, sregs->cppar1 & mask2); + } + + if (sregs->cpdata & mask1) + qe_gc->cpdata |= mask1; + else + qe_gc->cpdata &= ~mask1; + + out_be32(®s->cpdata, qe_gc->cpdata); + clrsetbits_be32(®s->cpodr, mask1, sregs->cpodr & mask1); + + spin_unlock_irqrestore(&qe_gc->lock, flags); +} +EXPORT_SYMBOL(qe_pin_set_dedicated); + +/** + * qe_pin_set_gpio - Set a pin to the GPIO mode + * @qe_pin: pointer to the qe_pin structure + * Context: any + * + * This function sets a pin to the GPIO mode. + */ +void qe_pin_set_gpio(struct qe_pin *qe_pin) +{ + struct qe_gpio_chip *qe_gc = qe_pin->controller; + struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs; + unsigned long flags; + + spin_lock_irqsave(&qe_gc->lock, flags); + + /* Let's make it input by default, GPIO API is able to change that. */ + __par_io_config_pin(regs, qe_pin->num, QE_PIO_DIR_IN, 0, 0, 0); + + spin_unlock_irqrestore(&qe_gc->lock, flags); +} +EXPORT_SYMBOL(qe_pin_set_gpio); + +static int __init qe_add_gpiochips(void) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, "fsl,mpc8323-qe-pario-bank") { + int ret; + struct qe_gpio_chip *qe_gc; + struct of_mm_gpio_chip *mm_gc; + struct gpio_chip *gc; + + qe_gc = kzalloc(sizeof(*qe_gc), GFP_KERNEL); + if (!qe_gc) { + ret = -ENOMEM; + goto err; + } + + spin_lock_init(&qe_gc->lock); + + mm_gc = &qe_gc->mm_gc; + gc = &mm_gc->gc; + + mm_gc->save_regs = qe_gpio_save_regs; + gc->ngpio = QE_PIO_PINS; + gc->direction_input = qe_gpio_dir_in; + gc->direction_output = qe_gpio_dir_out; + gc->get = qe_gpio_get; + gc->set = qe_gpio_set; + + ret = of_mm_gpiochip_add(np, mm_gc); + if (ret) + goto err; + continue; +err: + pr_err("%s: registration failed with status %d\n", + np->full_name, ret); + kfree(qe_gc); + /* try others anyway */ + } + return 0; +} +arch_initcall(qe_add_gpiochips); diff --git a/drivers/soc/fsl/qe/qe.c b/drivers/soc/fsl/qe/qe.c new file mode 100644 index 000000000000..709fc63809e5 --- /dev/null +++ b/drivers/soc/fsl/qe/qe.c @@ -0,0 +1,719 @@ +/* + * Copyright (C) 2006-2010 Freescale Semiconductor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish <gridish@freescale.com> + * Li Yang <leoli@freescale.com> + * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net) + * + * Description: + * General Purpose functions for the global management of the + * QUICC Engine (QE). + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/crc32.h> +#include <linux/mod_devicetable.h> +#include <linux/of_platform.h> +#include <asm/irq.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <soc/fsl/qe/immap_qe.h> +#include <soc/fsl/qe/qe.h> +#include <asm/prom.h> +#include <asm/rheap.h> + +static void qe_snums_init(void); +static int qe_sdma_init(void); + +static DEFINE_SPINLOCK(qe_lock); +DEFINE_SPINLOCK(cmxgcr_lock); +EXPORT_SYMBOL(cmxgcr_lock); + +/* QE snum state */ +enum qe_snum_state { + QE_SNUM_STATE_USED, + QE_SNUM_STATE_FREE +}; + +/* QE snum */ +struct qe_snum { + u8 num; + enum qe_snum_state state; +}; + +/* We allocate this here because it is used almost exclusively for + * the communication processor devices. + */ +struct qe_immap __iomem *qe_immr; +EXPORT_SYMBOL(qe_immr); + +static struct qe_snum snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */ +static unsigned int qe_num_of_snum; + +static phys_addr_t qebase = -1; + +phys_addr_t get_qe_base(void) +{ + struct device_node *qe; + int size; + const u32 *prop; + + if (qebase != -1) + return qebase; + + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!qe) { + qe = of_find_node_by_type(NULL, "qe"); + if (!qe) + return qebase; + } + + prop = of_get_property(qe, "reg", &size); + if (prop && size >= sizeof(*prop)) + qebase = of_translate_address(qe, prop); + of_node_put(qe); + + return qebase; +} + +EXPORT_SYMBOL(get_qe_base); + +void qe_reset(void) +{ + if (qe_immr == NULL) + qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE); + + qe_snums_init(); + + qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID, + QE_CR_PROTOCOL_UNSPECIFIED, 0); + + /* Reclaim the MURAM memory for our use. */ + qe_muram_init(); + + if (qe_sdma_init()) + panic("sdma init failed!"); +} + +int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input) +{ + unsigned long flags; + u8 mcn_shift = 0, dev_shift = 0; + u32 ret; + + spin_lock_irqsave(&qe_lock, flags); + if (cmd == QE_RESET) { + out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG)); + } else { + if (cmd == QE_ASSIGN_PAGE) { + /* Here device is the SNUM, not sub-block */ + dev_shift = QE_CR_SNUM_SHIFT; + } else if (cmd == QE_ASSIGN_RISC) { + /* Here device is the SNUM, and mcnProtocol is + * e_QeCmdRiscAssignment value */ + dev_shift = QE_CR_SNUM_SHIFT; + mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT; + } else { + if (device == QE_CR_SUBBLOCK_USB) + mcn_shift = QE_CR_MCN_USB_SHIFT; + else + mcn_shift = QE_CR_MCN_NORMAL_SHIFT; + } + + out_be32(&qe_immr->cp.cecdr, cmd_input); + out_be32(&qe_immr->cp.cecr, + (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32) + mcn_protocol << mcn_shift)); + } + + /* wait for the QE_CR_FLG to clear */ + ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0, + 100, 0); + /* On timeout (e.g. failure), the expression will be false (ret == 0), + otherwise it will be true (ret == 1). */ + spin_unlock_irqrestore(&qe_lock, flags); + + return ret == 1; +} +EXPORT_SYMBOL(qe_issue_cmd); + +/* Set a baud rate generator. This needs lots of work. There are + * 16 BRGs, which can be connected to the QE channels or output + * as clocks. The BRGs are in two different block of internal + * memory mapped space. + * The BRG clock is the QE clock divided by 2. + * It was set up long ago during the initial boot phase and is + * is given to us. + * Baud rate clocks are zero-based in the driver code (as that maps + * to port numbers). Documentation uses 1-based numbering. + */ +static unsigned int brg_clk = 0; + +unsigned int qe_get_brg_clk(void) +{ + struct device_node *qe; + int size; + const u32 *prop; + + if (brg_clk) + return brg_clk; + + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!qe) { + qe = of_find_node_by_type(NULL, "qe"); + if (!qe) + return brg_clk; + } + + prop = of_get_property(qe, "brg-frequency", &size); + if (prop && size == sizeof(*prop)) + brg_clk = *prop; + + of_node_put(qe); + + return brg_clk; +} +EXPORT_SYMBOL(qe_get_brg_clk); + +/* Program the BRG to the given sampling rate and multiplier + * + * @brg: the BRG, QE_BRG1 - QE_BRG16 + * @rate: the desired sampling rate + * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or + * GUMR_L[TDCR]. E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01, + * then 'multiplier' should be 8. + */ +int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier) +{ + u32 divisor, tempval; + u32 div16 = 0; + + if ((brg < QE_BRG1) || (brg > QE_BRG16)) + return -EINVAL; + + divisor = qe_get_brg_clk() / (rate * multiplier); + + if (divisor > QE_BRGC_DIVISOR_MAX + 1) { + div16 = QE_BRGC_DIV16; + divisor /= 16; + } + + /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says + that the BRG divisor must be even if you're not using divide-by-16 + mode. */ + if (!div16 && (divisor & 1) && (divisor > 3)) + divisor++; + + tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | + QE_BRGC_ENABLE | div16; + + out_be32(&qe_immr->brg.brgc[brg - QE_BRG1], tempval); + + return 0; +} +EXPORT_SYMBOL(qe_setbrg); + +/* Convert a string to a QE clock source enum + * + * This function takes a string, typically from a property in the device + * tree, and returns the corresponding "enum qe_clock" value. +*/ +enum qe_clock qe_clock_source(const char *source) +{ + unsigned int i; + + if (strcasecmp(source, "none") == 0) + return QE_CLK_NONE; + + if (strncasecmp(source, "brg", 3) == 0) { + i = simple_strtoul(source + 3, NULL, 10); + if ((i >= 1) && (i <= 16)) + return (QE_BRG1 - 1) + i; + else + return QE_CLK_DUMMY; + } + + if (strncasecmp(source, "clk", 3) == 0) { + i = simple_strtoul(source + 3, NULL, 10); + if ((i >= 1) && (i <= 24)) + return (QE_CLK1 - 1) + i; + else + return QE_CLK_DUMMY; + } + + return QE_CLK_DUMMY; +} +EXPORT_SYMBOL(qe_clock_source); + +/* Initialize SNUMs (thread serial numbers) according to + * QE Module Control chapter, SNUM table + */ +static void qe_snums_init(void) +{ + int i; + static const u8 snum_init_76[] = { + 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D, + 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89, + 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9, + 0xD8, 0xD9, 0xE8, 0xE9, 0x44, 0x45, 0x4C, 0x4D, + 0x54, 0x55, 0x5C, 0x5D, 0x64, 0x65, 0x6C, 0x6D, + 0x74, 0x75, 0x7C, 0x7D, 0x84, 0x85, 0x8C, 0x8D, + 0x94, 0x95, 0x9C, 0x9D, 0xA4, 0xA5, 0xAC, 0xAD, + 0xB4, 0xB5, 0xBC, 0xBD, 0xC4, 0xC5, 0xCC, 0xCD, + 0xD4, 0xD5, 0xDC, 0xDD, 0xE4, 0xE5, 0xEC, 0xED, + 0xF4, 0xF5, 0xFC, 0xFD, + }; + static const u8 snum_init_46[] = { + 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D, + 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89, + 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9, + 0xD8, 0xD9, 0xE8, 0xE9, 0x08, 0x09, 0x18, 0x19, + 0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59, + 0x68, 0x69, 0x78, 0x79, 0x80, 0x81, + }; + static const u8 *snum_init; + + qe_num_of_snum = qe_get_num_of_snums(); + + if (qe_num_of_snum == 76) + snum_init = snum_init_76; + else + snum_init = snum_init_46; + + for (i = 0; i < qe_num_of_snum; i++) { + snums[i].num = snum_init[i]; + snums[i].state = QE_SNUM_STATE_FREE; + } +} + +int qe_get_snum(void) +{ + unsigned long flags; + int snum = -EBUSY; + int i; + + spin_lock_irqsave(&qe_lock, flags); + for (i = 0; i < qe_num_of_snum; i++) { + if (snums[i].state == QE_SNUM_STATE_FREE) { + snums[i].state = QE_SNUM_STATE_USED; + snum = snums[i].num; + break; + } + } + spin_unlock_irqrestore(&qe_lock, flags); + + return snum; +} +EXPORT_SYMBOL(qe_get_snum); + +void qe_put_snum(u8 snum) +{ + int i; + + for (i = 0; i < qe_num_of_snum; i++) { + if (snums[i].num == snum) { + snums[i].state = QE_SNUM_STATE_FREE; + break; + } + } +} +EXPORT_SYMBOL(qe_put_snum); + +static int qe_sdma_init(void) +{ + struct sdma __iomem *sdma = &qe_immr->sdma; + static unsigned long sdma_buf_offset = (unsigned long)-ENOMEM; + + if (!sdma) + return -ENODEV; + + /* allocate 2 internal temporary buffers (512 bytes size each) for + * the SDMA */ + if (IS_ERR_VALUE(sdma_buf_offset)) { + sdma_buf_offset = qe_muram_alloc(512 * 2, 4096); + if (IS_ERR_VALUE(sdma_buf_offset)) + return -ENOMEM; + } + + out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK); + out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK | + (0x1 << QE_SDMR_CEN_SHIFT))); + + return 0; +} + +/* The maximum number of RISCs we support */ +#define MAX_QE_RISC 4 + +/* Firmware information stored here for qe_get_firmware_info() */ +static struct qe_firmware_info qe_firmware_info; + +/* + * Set to 1 if QE firmware has been uploaded, and therefore + * qe_firmware_info contains valid data. + */ +static int qe_firmware_uploaded; + +/* + * Upload a QE microcode + * + * This function is a worker function for qe_upload_firmware(). It does + * the actual uploading of the microcode. + */ +static void qe_upload_microcode(const void *base, + const struct qe_microcode *ucode) +{ + const __be32 *code = base + be32_to_cpu(ucode->code_offset); + unsigned int i; + + if (ucode->major || ucode->minor || ucode->revision) + printk(KERN_INFO "qe-firmware: " + "uploading microcode '%s' version %u.%u.%u\n", + ucode->id, ucode->major, ucode->minor, ucode->revision); + else + printk(KERN_INFO "qe-firmware: " + "uploading microcode '%s'\n", ucode->id); + + /* Use auto-increment */ + out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) | + QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR); + + for (i = 0; i < be32_to_cpu(ucode->count); i++) + out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i])); + + /* Set I-RAM Ready Register */ + out_be32(&qe_immr->iram.iready, be32_to_cpu(QE_IRAM_READY)); +} + +/* + * Upload a microcode to the I-RAM at a specific address. + * + * See Documentation/powerpc/qe_firmware.txt for information on QE microcode + * uploading. + * + * Currently, only version 1 is supported, so the 'version' field must be + * set to 1. + * + * The SOC model and revision are not validated, they are only displayed for + * informational purposes. + * + * 'calc_size' is the calculated size, in bytes, of the firmware structure and + * all of the microcode structures, minus the CRC. + * + * 'length' is the size that the structure says it is, including the CRC. + */ +int qe_upload_firmware(const struct qe_firmware *firmware) +{ + unsigned int i; + unsigned int j; + u32 crc; + size_t calc_size = sizeof(struct qe_firmware); + size_t length; + const struct qe_header *hdr; + + if (!firmware) { + printk(KERN_ERR "qe-firmware: invalid pointer\n"); + return -EINVAL; + } + + hdr = &firmware->header; + length = be32_to_cpu(hdr->length); + + /* Check the magic */ + if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') || + (hdr->magic[2] != 'F')) { + printk(KERN_ERR "qe-firmware: not a microcode\n"); + return -EPERM; + } + + /* Check the version */ + if (hdr->version != 1) { + printk(KERN_ERR "qe-firmware: unsupported version\n"); + return -EPERM; + } + + /* Validate some of the fields */ + if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) { + printk(KERN_ERR "qe-firmware: invalid data\n"); + return -EINVAL; + } + + /* Validate the length and check if there's a CRC */ + calc_size += (firmware->count - 1) * sizeof(struct qe_microcode); + + for (i = 0; i < firmware->count; i++) + /* + * For situations where the second RISC uses the same microcode + * as the first, the 'code_offset' and 'count' fields will be + * zero, so it's okay to add those. + */ + calc_size += sizeof(__be32) * + be32_to_cpu(firmware->microcode[i].count); + + /* Validate the length */ + if (length != calc_size + sizeof(__be32)) { + printk(KERN_ERR "qe-firmware: invalid length\n"); + return -EPERM; + } + + /* Validate the CRC */ + crc = be32_to_cpu(*(__be32 *)((void *)firmware + calc_size)); + if (crc != crc32(0, firmware, calc_size)) { + printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n"); + return -EIO; + } + + /* + * If the microcode calls for it, split the I-RAM. + */ + if (!firmware->split) + setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR); + + if (firmware->soc.model) + printk(KERN_INFO + "qe-firmware: firmware '%s' for %u V%u.%u\n", + firmware->id, be16_to_cpu(firmware->soc.model), + firmware->soc.major, firmware->soc.minor); + else + printk(KERN_INFO "qe-firmware: firmware '%s'\n", + firmware->id); + + /* + * The QE only supports one microcode per RISC, so clear out all the + * saved microcode information and put in the new. + */ + memset(&qe_firmware_info, 0, sizeof(qe_firmware_info)); + strlcpy(qe_firmware_info.id, firmware->id, sizeof(qe_firmware_info.id)); + qe_firmware_info.extended_modes = firmware->extended_modes; + memcpy(qe_firmware_info.vtraps, firmware->vtraps, + sizeof(firmware->vtraps)); + + /* Loop through each microcode. */ + for (i = 0; i < firmware->count; i++) { + const struct qe_microcode *ucode = &firmware->microcode[i]; + + /* Upload a microcode if it's present */ + if (ucode->code_offset) + qe_upload_microcode(firmware, ucode); + + /* Program the traps for this processor */ + for (j = 0; j < 16; j++) { + u32 trap = be32_to_cpu(ucode->traps[j]); + + if (trap) + out_be32(&qe_immr->rsp[i].tibcr[j], trap); + } + + /* Enable traps */ + out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr)); + } + + qe_firmware_uploaded = 1; + + return 0; +} +EXPORT_SYMBOL(qe_upload_firmware); + +/* + * Get info on the currently-loaded firmware + * + * This function also checks the device tree to see if the boot loader has + * uploaded a firmware already. + */ +struct qe_firmware_info *qe_get_firmware_info(void) +{ + static int initialized; + struct property *prop; + struct device_node *qe; + struct device_node *fw = NULL; + const char *sprop; + unsigned int i; + + /* + * If we haven't checked yet, and a driver hasn't uploaded a firmware + * yet, then check the device tree for information. + */ + if (qe_firmware_uploaded) + return &qe_firmware_info; + + if (initialized) + return NULL; + + initialized = 1; + + /* + * Newer device trees have an "fsl,qe" compatible property for the QE + * node, but we still need to support older device trees. + */ + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!qe) { + qe = of_find_node_by_type(NULL, "qe"); + if (!qe) + return NULL; + } + + /* Find the 'firmware' child node */ + for_each_child_of_node(qe, fw) { + if (strcmp(fw->name, "firmware") == 0) + break; + } + + of_node_put(qe); + + /* Did we find the 'firmware' node? */ + if (!fw) + return NULL; + + qe_firmware_uploaded = 1; + + /* Copy the data into qe_firmware_info*/ + sprop = of_get_property(fw, "id", NULL); + if (sprop) + strlcpy(qe_firmware_info.id, sprop, + sizeof(qe_firmware_info.id)); + + prop = of_find_property(fw, "extended-modes", NULL); + if (prop && (prop->length == sizeof(u64))) { + const u64 *iprop = prop->value; + + qe_firmware_info.extended_modes = *iprop; + } + + prop = of_find_property(fw, "virtual-traps", NULL); + if (prop && (prop->length == 32)) { + const u32 *iprop = prop->value; + + for (i = 0; i < ARRAY_SIZE(qe_firmware_info.vtraps); i++) + qe_firmware_info.vtraps[i] = iprop[i]; + } + + of_node_put(fw); + + return &qe_firmware_info; +} +EXPORT_SYMBOL(qe_get_firmware_info); + +unsigned int qe_get_num_of_risc(void) +{ + struct device_node *qe; + int size; + unsigned int num_of_risc = 0; + const u32 *prop; + + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!qe) { + /* Older devices trees did not have an "fsl,qe" + * compatible property, so we need to look for + * the QE node by name. + */ + qe = of_find_node_by_type(NULL, "qe"); + if (!qe) + return num_of_risc; + } + + prop = of_get_property(qe, "fsl,qe-num-riscs", &size); + if (prop && size == sizeof(*prop)) + num_of_risc = *prop; + + of_node_put(qe); + + return num_of_risc; +} +EXPORT_SYMBOL(qe_get_num_of_risc); + +unsigned int qe_get_num_of_snums(void) +{ + struct device_node *qe; + int size; + unsigned int num_of_snums; + const u32 *prop; + + num_of_snums = 28; /* The default number of snum for threads is 28 */ + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!qe) { + /* Older devices trees did not have an "fsl,qe" + * compatible property, so we need to look for + * the QE node by name. + */ + qe = of_find_node_by_type(NULL, "qe"); + if (!qe) + return num_of_snums; + } + + prop = of_get_property(qe, "fsl,qe-num-snums", &size); + if (prop && size == sizeof(*prop)) { + num_of_snums = *prop; + if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) { + /* No QE ever has fewer than 28 SNUMs */ + pr_err("QE: number of snum is invalid\n"); + of_node_put(qe); + return -EINVAL; + } + } + + of_node_put(qe); + + return num_of_snums; +} +EXPORT_SYMBOL(qe_get_num_of_snums); + +static int __init qe_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!np) + return -ENODEV; + qe_reset(); + of_node_put(np); + return 0; +} +subsys_initcall(qe_init); + +#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) +static int qe_resume(struct platform_device *ofdev) +{ + if (!qe_alive_during_sleep()) + qe_reset(); + return 0; +} + +static int qe_probe(struct platform_device *ofdev) +{ + return 0; +} + +static const struct of_device_id qe_ids[] = { + { .compatible = "fsl,qe", }, + { }, +}; + +static struct platform_driver qe_driver = { + .driver = { + .name = "fsl-qe", + .of_match_table = qe_ids, + }, + .probe = qe_probe, + .resume = qe_resume, +}; + +static int __init qe_drv_init(void) +{ + return platform_driver_register(&qe_driver); +} +device_initcall(qe_drv_init); +#endif /* defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) */ diff --git a/drivers/soc/fsl/qe/qe_common.c b/drivers/soc/fsl/qe/qe_common.c new file mode 100644 index 000000000000..419fa5b7be4d --- /dev/null +++ b/drivers/soc/fsl/qe/qe_common.c @@ -0,0 +1,235 @@ +/* + * Common CPM code + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright 2007-2008,2010 Freescale Semiconductor, Inc. + * + * Some parts derived from commproc.c/cpm2_common.c, which is: + * Copyright (c) 1997 Dan error_act (dmalek@jlc.net) + * Copyright (c) 1999-2001 Dan Malek <dan@embeddedalley.com> + * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com) + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + */ +#include <linux/genalloc.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/of_device.h> +#include <linux/spinlock.h> +#include <linux/export.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <soc/fsl/qe/qe.h> + +static struct gen_pool *muram_pool; +static spinlock_t cpm_muram_lock; +static u8 __iomem *muram_vbase; +static phys_addr_t muram_pbase; + +struct muram_block { + struct list_head head; + unsigned long start; + int size; +}; + +static LIST_HEAD(muram_block_list); + +/* max address size we deal with */ +#define OF_MAX_ADDR_CELLS 4 +#define GENPOOL_OFFSET (4096 * 8) + +int cpm_muram_init(void) +{ + struct device_node *np; + struct resource r; + u32 zero[OF_MAX_ADDR_CELLS] = {}; + resource_size_t max = 0; + int i = 0; + int ret = 0; + + if (muram_pbase) + return 0; + + spin_lock_init(&cpm_muram_lock); + np = of_find_compatible_node(NULL, NULL, "fsl,cpm-muram-data"); + if (!np) { + /* try legacy bindings */ + np = of_find_node_by_name(NULL, "data-only"); + if (!np) { + pr_err("Cannot find CPM muram data node"); + ret = -ENODEV; + goto out_muram; + } + } + + muram_pool = gen_pool_create(0, -1); + muram_pbase = of_translate_address(np, zero); + if (muram_pbase == (phys_addr_t)OF_BAD_ADDR) { + pr_err("Cannot translate zero through CPM muram node"); + ret = -ENODEV; + goto out_pool; + } + + while (of_address_to_resource(np, i++, &r) == 0) { + if (r.end > max) + max = r.end; + ret = gen_pool_add(muram_pool, r.start - muram_pbase + + GENPOOL_OFFSET, resource_size(&r), -1); + if (ret) { + pr_err("QE: couldn't add muram to pool!\n"); + goto out_pool; + } + } + + muram_vbase = ioremap(muram_pbase, max - muram_pbase + 1); + if (!muram_vbase) { + pr_err("Cannot map QE muram"); + ret = -ENOMEM; + goto out_pool; + } + goto out_muram; +out_pool: + gen_pool_destroy(muram_pool); +out_muram: + of_node_put(np); + return ret; +} + +/* + * cpm_muram_alloc - allocate the requested size worth of multi-user ram + * @size: number of bytes to allocate + * @align: requested alignment, in bytes + * + * This function returns an offset into the muram area. + * Use cpm_dpram_addr() to get the virtual address of the area. + * Use cpm_muram_free() to free the allocation. + */ +unsigned long cpm_muram_alloc(unsigned long size, unsigned long align) +{ + unsigned long start; + unsigned long flags; + struct genpool_data_align muram_pool_data; + + spin_lock_irqsave(&cpm_muram_lock, flags); + muram_pool_data.align = align; + start = cpm_muram_alloc_common(size, gen_pool_first_fit_align, + &muram_pool_data); + spin_unlock_irqrestore(&cpm_muram_lock, flags); + return start; +} +EXPORT_SYMBOL(cpm_muram_alloc); + +/** + * cpm_muram_free - free a chunk of multi-user ram + * @offset: The beginning of the chunk as returned by cpm_muram_alloc(). + */ +int cpm_muram_free(unsigned long offset) +{ + unsigned long flags; + int size; + struct muram_block *tmp; + + size = 0; + spin_lock_irqsave(&cpm_muram_lock, flags); + list_for_each_entry(tmp, &muram_block_list, head) { + if (tmp->start == offset) { + size = tmp->size; + list_del(&tmp->head); + kfree(tmp); + break; + } + } + gen_pool_free(muram_pool, offset + GENPOOL_OFFSET, size); + spin_unlock_irqrestore(&cpm_muram_lock, flags); + return size; +} +EXPORT_SYMBOL(cpm_muram_free); + +/* + * cpm_muram_alloc_fixed - reserve a specific region of multi-user ram + * @offset: offset of allocation start address + * @size: number of bytes to allocate + * This function returns an offset into the muram area + * Use cpm_dpram_addr() to get the virtual address of the area. + * Use cpm_muram_free() to free the allocation. + */ +unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size) +{ + unsigned long start; + unsigned long flags; + struct genpool_data_fixed muram_pool_data_fixed; + + spin_lock_irqsave(&cpm_muram_lock, flags); + muram_pool_data_fixed.offset = offset + GENPOOL_OFFSET; + start = cpm_muram_alloc_common(size, gen_pool_fixed_alloc, + &muram_pool_data_fixed); + spin_unlock_irqrestore(&cpm_muram_lock, flags); + return start; +} +EXPORT_SYMBOL(cpm_muram_alloc_fixed); + +/* + * cpm_muram_alloc_common - cpm_muram_alloc common code + * @size: number of bytes to allocate + * @algo: algorithm for alloc. + * @data: data for genalloc's algorithm. + * + * This function returns an offset into the muram area. + */ +unsigned long cpm_muram_alloc_common(unsigned long size, genpool_algo_t algo, + void *data) +{ + struct muram_block *entry; + unsigned long start; + + start = gen_pool_alloc_algo(muram_pool, size, algo, data); + if (!start) + goto out2; + start = start - GENPOOL_OFFSET; + memset_io(cpm_muram_addr(start), 0, size); + entry = kmalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) + goto out1; + entry->start = start; + entry->size = size; + list_add(&entry->head, &muram_block_list); + + return start; +out1: + gen_pool_free(muram_pool, start, size); +out2: + return (unsigned long)-ENOMEM; +} + +/** + * cpm_muram_addr - turn a muram offset into a virtual address + * @offset: muram offset to convert + */ +void __iomem *cpm_muram_addr(unsigned long offset) +{ + return muram_vbase + offset; +} +EXPORT_SYMBOL(cpm_muram_addr); + +unsigned long cpm_muram_offset(void __iomem *addr) +{ + return addr - (void __iomem *)muram_vbase; +} +EXPORT_SYMBOL(cpm_muram_offset); + +/** + * cpm_muram_dma - turn a muram virtual address into a DMA address + * @offset: virtual address from cpm_muram_addr() to convert + */ +dma_addr_t cpm_muram_dma(void __iomem *addr) +{ + return muram_pbase + ((u8 __iomem *)addr - muram_vbase); +} +EXPORT_SYMBOL(cpm_muram_dma); diff --git a/drivers/soc/fsl/qe/qe_ic.c b/drivers/soc/fsl/qe/qe_ic.c new file mode 100644 index 000000000000..b77d01ff8330 --- /dev/null +++ b/drivers/soc/fsl/qe/qe_ic.c @@ -0,0 +1,503 @@ +/* + * arch/powerpc/sysdev/qe_lib/qe_ic.c + * + * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Author: Li Yang <leoli@freescale.com> + * Based on code from Shlomi Gridish <gridish@freescale.com> + * + * QUICC ENGINE Interrupt Controller + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/slab.h> +#include <linux/stddef.h> +#include <linux/sched.h> +#include <linux/signal.h> +#include <linux/device.h> +#include <linux/spinlock.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <soc/fsl/qe/qe_ic.h> + +#include "qe_ic.h" + +static DEFINE_RAW_SPINLOCK(qe_ic_lock); + +static struct qe_ic_info qe_ic_info[] = { + [1] = { + .mask = 0x00008000, + .mask_reg = QEIC_CIMR, + .pri_code = 0, + .pri_reg = QEIC_CIPWCC, + }, + [2] = { + .mask = 0x00004000, + .mask_reg = QEIC_CIMR, + .pri_code = 1, + .pri_reg = QEIC_CIPWCC, + }, + [3] = { + .mask = 0x00002000, + .mask_reg = QEIC_CIMR, + .pri_code = 2, + .pri_reg = QEIC_CIPWCC, + }, + [10] = { + .mask = 0x00000040, + .mask_reg = QEIC_CIMR, + .pri_code = 1, + .pri_reg = QEIC_CIPZCC, + }, + [11] = { + .mask = 0x00000020, + .mask_reg = QEIC_CIMR, + .pri_code = 2, + .pri_reg = QEIC_CIPZCC, + }, + [12] = { + .mask = 0x00000010, + .mask_reg = QEIC_CIMR, + .pri_code = 3, + .pri_reg = QEIC_CIPZCC, + }, + [13] = { + .mask = 0x00000008, + .mask_reg = QEIC_CIMR, + .pri_code = 4, + .pri_reg = QEIC_CIPZCC, + }, + [14] = { + .mask = 0x00000004, + .mask_reg = QEIC_CIMR, + .pri_code = 5, + .pri_reg = QEIC_CIPZCC, + }, + [15] = { + .mask = 0x00000002, + .mask_reg = QEIC_CIMR, + .pri_code = 6, + .pri_reg = QEIC_CIPZCC, + }, + [20] = { + .mask = 0x10000000, + .mask_reg = QEIC_CRIMR, + .pri_code = 3, + .pri_reg = QEIC_CIPRTA, + }, + [25] = { + .mask = 0x00800000, + .mask_reg = QEIC_CRIMR, + .pri_code = 0, + .pri_reg = QEIC_CIPRTB, + }, + [26] = { + .mask = 0x00400000, + .mask_reg = QEIC_CRIMR, + .pri_code = 1, + .pri_reg = QEIC_CIPRTB, + }, + [27] = { + .mask = 0x00200000, + .mask_reg = QEIC_CRIMR, + .pri_code = 2, + .pri_reg = QEIC_CIPRTB, + }, + [28] = { + .mask = 0x00100000, + .mask_reg = QEIC_CRIMR, + .pri_code = 3, + .pri_reg = QEIC_CIPRTB, + }, + [32] = { + .mask = 0x80000000, + .mask_reg = QEIC_CIMR, + .pri_code = 0, + .pri_reg = QEIC_CIPXCC, + }, + [33] = { + .mask = 0x40000000, + .mask_reg = QEIC_CIMR, + .pri_code = 1, + .pri_reg = QEIC_CIPXCC, + }, + [34] = { + .mask = 0x20000000, + .mask_reg = QEIC_CIMR, + .pri_code = 2, + .pri_reg = QEIC_CIPXCC, + }, + [35] = { + .mask = 0x10000000, + .mask_reg = QEIC_CIMR, + .pri_code = 3, + .pri_reg = QEIC_CIPXCC, + }, + [36] = { + .mask = 0x08000000, + .mask_reg = QEIC_CIMR, + .pri_code = 4, + .pri_reg = QEIC_CIPXCC, + }, + [40] = { + .mask = 0x00800000, + .mask_reg = QEIC_CIMR, + .pri_code = 0, + .pri_reg = QEIC_CIPYCC, + }, + [41] = { + .mask = 0x00400000, + .mask_reg = QEIC_CIMR, + .pri_code = 1, + .pri_reg = QEIC_CIPYCC, + }, + [42] = { + .mask = 0x00200000, + .mask_reg = QEIC_CIMR, + .pri_code = 2, + .pri_reg = QEIC_CIPYCC, + }, + [43] = { + .mask = 0x00100000, + .mask_reg = QEIC_CIMR, + .pri_code = 3, + .pri_reg = QEIC_CIPYCC, + }, +}; + +static inline u32 qe_ic_read(volatile __be32 __iomem * base, unsigned int reg) +{ + return in_be32(base + (reg >> 2)); +} + +static inline void qe_ic_write(volatile __be32 __iomem * base, unsigned int reg, + u32 value) +{ + out_be32(base + (reg >> 2), value); +} + +static inline struct qe_ic *qe_ic_from_irq(unsigned int virq) +{ + return irq_get_chip_data(virq); +} + +static inline struct qe_ic *qe_ic_from_irq_data(struct irq_data *d) +{ + return irq_data_get_irq_chip_data(d); +} + +static void qe_ic_unmask_irq(struct irq_data *d) +{ + struct qe_ic *qe_ic = qe_ic_from_irq_data(d); + unsigned int src = irqd_to_hwirq(d); + unsigned long flags; + u32 temp; + + raw_spin_lock_irqsave(&qe_ic_lock, flags); + + temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg); + qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg, + temp | qe_ic_info[src].mask); + + raw_spin_unlock_irqrestore(&qe_ic_lock, flags); +} + +static void qe_ic_mask_irq(struct irq_data *d) +{ + struct qe_ic *qe_ic = qe_ic_from_irq_data(d); + unsigned int src = irqd_to_hwirq(d); + unsigned long flags; + u32 temp; + + raw_spin_lock_irqsave(&qe_ic_lock, flags); + + temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg); + qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg, + temp & ~qe_ic_info[src].mask); + + /* Flush the above write before enabling interrupts; otherwise, + * spurious interrupts will sometimes happen. To be 100% sure + * that the write has reached the device before interrupts are + * enabled, the mask register would have to be read back; however, + * this is not required for correctness, only to avoid wasting + * time on a large number of spurious interrupts. In testing, + * a sync reduced the observed spurious interrupts to zero. + */ + mb(); + + raw_spin_unlock_irqrestore(&qe_ic_lock, flags); +} + +static struct irq_chip qe_ic_irq_chip = { + .name = "QEIC", + .irq_unmask = qe_ic_unmask_irq, + .irq_mask = qe_ic_mask_irq, + .irq_mask_ack = qe_ic_mask_irq, +}; + +static int qe_ic_host_match(struct irq_domain *h, struct device_node *node, + enum irq_domain_bus_token bus_token) +{ + /* Exact match, unless qe_ic node is NULL */ + struct device_node *of_node = irq_domain_get_of_node(h); + return of_node == NULL || of_node == node; +} + +static int qe_ic_host_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct qe_ic *qe_ic = h->host_data; + struct irq_chip *chip; + + if (qe_ic_info[hw].mask == 0) { + printk(KERN_ERR "Can't map reserved IRQ\n"); + return -EINVAL; + } + /* Default chip */ + chip = &qe_ic->hc_irq; + + irq_set_chip_data(virq, qe_ic); + irq_set_status_flags(virq, IRQ_LEVEL); + + irq_set_chip_and_handler(virq, chip, handle_level_irq); + + return 0; +} + +static const struct irq_domain_ops qe_ic_host_ops = { + .match = qe_ic_host_match, + .map = qe_ic_host_map, + .xlate = irq_domain_xlate_onetwocell, +}; + +/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */ +unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic) +{ + int irq; + + BUG_ON(qe_ic == NULL); + + /* get the interrupt source vector. */ + irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26; + + if (irq == 0) + return NO_IRQ; + + return irq_linear_revmap(qe_ic->irqhost, irq); +} + +/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */ +unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic) +{ + int irq; + + BUG_ON(qe_ic == NULL); + + /* get the interrupt source vector. */ + irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26; + + if (irq == 0) + return NO_IRQ; + + return irq_linear_revmap(qe_ic->irqhost, irq); +} + +void __init qe_ic_init(struct device_node *node, unsigned int flags, + void (*low_handler)(struct irq_desc *desc), + void (*high_handler)(struct irq_desc *desc)) +{ + struct qe_ic *qe_ic; + struct resource res; + u32 temp = 0, ret, high_active = 0; + + ret = of_address_to_resource(node, 0, &res); + if (ret) + return; + + qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL); + if (qe_ic == NULL) + return; + + qe_ic->irqhost = irq_domain_add_linear(node, NR_QE_IC_INTS, + &qe_ic_host_ops, qe_ic); + if (qe_ic->irqhost == NULL) { + kfree(qe_ic); + return; + } + + qe_ic->regs = ioremap(res.start, resource_size(&res)); + + qe_ic->hc_irq = qe_ic_irq_chip; + + qe_ic->virq_high = irq_of_parse_and_map(node, 0); + qe_ic->virq_low = irq_of_parse_and_map(node, 1); + + if (qe_ic->virq_low == NO_IRQ) { + printk(KERN_ERR "Failed to map QE_IC low IRQ\n"); + kfree(qe_ic); + return; + } + + /* default priority scheme is grouped. If spread mode is */ + /* required, configure cicr accordingly. */ + if (flags & QE_IC_SPREADMODE_GRP_W) + temp |= CICR_GWCC; + if (flags & QE_IC_SPREADMODE_GRP_X) + temp |= CICR_GXCC; + if (flags & QE_IC_SPREADMODE_GRP_Y) + temp |= CICR_GYCC; + if (flags & QE_IC_SPREADMODE_GRP_Z) + temp |= CICR_GZCC; + if (flags & QE_IC_SPREADMODE_GRP_RISCA) + temp |= CICR_GRTA; + if (flags & QE_IC_SPREADMODE_GRP_RISCB) + temp |= CICR_GRTB; + + /* choose destination signal for highest priority interrupt */ + if (flags & QE_IC_HIGH_SIGNAL) { + temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT); + high_active = 1; + } + + qe_ic_write(qe_ic->regs, QEIC_CICR, temp); + + irq_set_handler_data(qe_ic->virq_low, qe_ic); + irq_set_chained_handler(qe_ic->virq_low, low_handler); + + if (qe_ic->virq_high != NO_IRQ && + qe_ic->virq_high != qe_ic->virq_low) { + irq_set_handler_data(qe_ic->virq_high, qe_ic); + irq_set_chained_handler(qe_ic->virq_high, high_handler); + } +} + +void qe_ic_set_highest_priority(unsigned int virq, int high) +{ + struct qe_ic *qe_ic = qe_ic_from_irq(virq); + unsigned int src = virq_to_hw(virq); + u32 temp = 0; + + temp = qe_ic_read(qe_ic->regs, QEIC_CICR); + + temp &= ~CICR_HP_MASK; + temp |= src << CICR_HP_SHIFT; + + temp &= ~CICR_HPIT_MASK; + temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT; + + qe_ic_write(qe_ic->regs, QEIC_CICR, temp); +} + +/* Set Priority level within its group, from 1 to 8 */ +int qe_ic_set_priority(unsigned int virq, unsigned int priority) +{ + struct qe_ic *qe_ic = qe_ic_from_irq(virq); + unsigned int src = virq_to_hw(virq); + u32 temp; + + if (priority > 8 || priority == 0) + return -EINVAL; + if (src > 127) + return -EINVAL; + if (qe_ic_info[src].pri_reg == 0) + return -EINVAL; + + temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg); + + if (priority < 4) { + temp &= ~(0x7 << (32 - priority * 3)); + temp |= qe_ic_info[src].pri_code << (32 - priority * 3); + } else { + temp &= ~(0x7 << (24 - priority * 3)); + temp |= qe_ic_info[src].pri_code << (24 - priority * 3); + } + + qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp); + + return 0; +} + +/* Set a QE priority to use high irq, only priority 1~2 can use high irq */ +int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high) +{ + struct qe_ic *qe_ic = qe_ic_from_irq(virq); + unsigned int src = virq_to_hw(virq); + u32 temp, control_reg = QEIC_CICNR, shift = 0; + + if (priority > 2 || priority == 0) + return -EINVAL; + + switch (qe_ic_info[src].pri_reg) { + case QEIC_CIPZCC: + shift = CICNR_ZCC1T_SHIFT; + break; + case QEIC_CIPWCC: + shift = CICNR_WCC1T_SHIFT; + break; + case QEIC_CIPYCC: + shift = CICNR_YCC1T_SHIFT; + break; + case QEIC_CIPXCC: + shift = CICNR_XCC1T_SHIFT; + break; + case QEIC_CIPRTA: + shift = CRICR_RTA1T_SHIFT; + control_reg = QEIC_CRICR; + break; + case QEIC_CIPRTB: + shift = CRICR_RTB1T_SHIFT; + control_reg = QEIC_CRICR; + break; + default: + return -EINVAL; + } + + shift += (2 - priority) * 2; + temp = qe_ic_read(qe_ic->regs, control_reg); + temp &= ~(SIGNAL_MASK << shift); + temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift; + qe_ic_write(qe_ic->regs, control_reg, temp); + + return 0; +} + +static struct bus_type qe_ic_subsys = { + .name = "qe_ic", + .dev_name = "qe_ic", +}; + +static struct device device_qe_ic = { + .id = 0, + .bus = &qe_ic_subsys, +}; + +static int __init init_qe_ic_sysfs(void) +{ + int rc; + + printk(KERN_DEBUG "Registering qe_ic with sysfs...\n"); + + rc = subsys_system_register(&qe_ic_subsys, NULL); + if (rc) { + printk(KERN_ERR "Failed registering qe_ic sys class\n"); + return -ENODEV; + } + rc = device_register(&device_qe_ic); + if (rc) { + printk(KERN_ERR "Failed registering qe_ic sys device\n"); + return -ENODEV; + } + return 0; +} + +subsys_initcall(init_qe_ic_sysfs); diff --git a/drivers/soc/fsl/qe/qe_ic.h b/drivers/soc/fsl/qe/qe_ic.h new file mode 100644 index 000000000000..926a2ed42319 --- /dev/null +++ b/drivers/soc/fsl/qe/qe_ic.h @@ -0,0 +1,103 @@ +/* + * drivers/soc/fsl/qe/qe_ic.h + * + * QUICC ENGINE Interrupt Controller Header + * + * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Author: Li Yang <leoli@freescale.com> + * Based on code from Shlomi Gridish <gridish@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _POWERPC_SYSDEV_QE_IC_H +#define _POWERPC_SYSDEV_QE_IC_H + +#include <soc/fsl/qe/qe_ic.h> + +#define NR_QE_IC_INTS 64 + +/* QE IC registers offset */ +#define QEIC_CICR 0x00 +#define QEIC_CIVEC 0x04 +#define QEIC_CRIPNR 0x08 +#define QEIC_CIPNR 0x0c +#define QEIC_CIPXCC 0x10 +#define QEIC_CIPYCC 0x14 +#define QEIC_CIPWCC 0x18 +#define QEIC_CIPZCC 0x1c +#define QEIC_CIMR 0x20 +#define QEIC_CRIMR 0x24 +#define QEIC_CICNR 0x28 +#define QEIC_CIPRTA 0x30 +#define QEIC_CIPRTB 0x34 +#define QEIC_CRICR 0x3c +#define QEIC_CHIVEC 0x60 + +/* Interrupt priority registers */ +#define CIPCC_SHIFT_PRI0 29 +#define CIPCC_SHIFT_PRI1 26 +#define CIPCC_SHIFT_PRI2 23 +#define CIPCC_SHIFT_PRI3 20 +#define CIPCC_SHIFT_PRI4 13 +#define CIPCC_SHIFT_PRI5 10 +#define CIPCC_SHIFT_PRI6 7 +#define CIPCC_SHIFT_PRI7 4 + +/* CICR priority modes */ +#define CICR_GWCC 0x00040000 +#define CICR_GXCC 0x00020000 +#define CICR_GYCC 0x00010000 +#define CICR_GZCC 0x00080000 +#define CICR_GRTA 0x00200000 +#define CICR_GRTB 0x00400000 +#define CICR_HPIT_SHIFT 8 +#define CICR_HPIT_MASK 0x00000300 +#define CICR_HP_SHIFT 24 +#define CICR_HP_MASK 0x3f000000 + +/* CICNR */ +#define CICNR_WCC1T_SHIFT 20 +#define CICNR_ZCC1T_SHIFT 28 +#define CICNR_YCC1T_SHIFT 12 +#define CICNR_XCC1T_SHIFT 4 + +/* CRICR */ +#define CRICR_RTA1T_SHIFT 20 +#define CRICR_RTB1T_SHIFT 28 + +/* Signal indicator */ +#define SIGNAL_MASK 3 +#define SIGNAL_HIGH 2 +#define SIGNAL_LOW 0 + +struct qe_ic { + /* Control registers offset */ + volatile u32 __iomem *regs; + + /* The remapper for this QEIC */ + struct irq_domain *irqhost; + + /* The "linux" controller struct */ + struct irq_chip hc_irq; + + /* VIRQ numbers of QE high/low irqs */ + unsigned int virq_high; + unsigned int virq_low; +}; + +/* + * QE interrupt controller internal structure + */ +struct qe_ic_info { + u32 mask; /* location of this source at the QIMR register. */ + u32 mask_reg; /* Mask register offset */ + u8 pri_code; /* for grouped interrupts sources - the interrupt + code as appears at the group priority register */ + u32 pri_reg; /* Group priority register offset */ +}; + +#endif /* _POWERPC_SYSDEV_QE_IC_H */ diff --git a/drivers/soc/fsl/qe/qe_io.c b/drivers/soc/fsl/qe/qe_io.c new file mode 100644 index 000000000000..7ae59abc7863 --- /dev/null +++ b/drivers/soc/fsl/qe/qe_io.c @@ -0,0 +1,192 @@ +/* + * arch/powerpc/sysdev/qe_lib/qe_io.c + * + * QE Parallel I/O ports configuration routines + * + * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Author: Li Yang <LeoLi@freescale.com> + * Based on code from Shlomi Gridish <gridish@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/ioport.h> + +#include <asm/io.h> +#include <soc/fsl/qe/qe.h> +#include <asm/prom.h> +#include <sysdev/fsl_soc.h> + +#undef DEBUG + +static struct qe_pio_regs __iomem *par_io; +static int num_par_io_ports = 0; + +int par_io_init(struct device_node *np) +{ + struct resource res; + int ret; + const u32 *num_ports; + + /* Map Parallel I/O ports registers */ + ret = of_address_to_resource(np, 0, &res); + if (ret) + return ret; + par_io = ioremap(res.start, resource_size(&res)); + + num_ports = of_get_property(np, "num-ports", NULL); + if (num_ports) + num_par_io_ports = *num_ports; + + return 0; +} + +void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir, + int open_drain, int assignment, int has_irq) +{ + u32 pin_mask1bit; + u32 pin_mask2bits; + u32 new_mask2bits; + u32 tmp_val; + + /* calculate pin location for single and 2 bits information */ + pin_mask1bit = (u32) (1 << (QE_PIO_PINS - (pin + 1))); + + /* Set open drain, if required */ + tmp_val = in_be32(&par_io->cpodr); + if (open_drain) + out_be32(&par_io->cpodr, pin_mask1bit | tmp_val); + else + out_be32(&par_io->cpodr, ~pin_mask1bit & tmp_val); + + /* define direction */ + tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ? + in_be32(&par_io->cpdir2) : + in_be32(&par_io->cpdir1); + + /* get all bits mask for 2 bit per port */ + pin_mask2bits = (u32) (0x3 << (QE_PIO_PINS - + (pin % (QE_PIO_PINS / 2) + 1) * 2)); + + /* Get the final mask we need for the right definition */ + new_mask2bits = (u32) (dir << (QE_PIO_PINS - + (pin % (QE_PIO_PINS / 2) + 1) * 2)); + + /* clear and set 2 bits mask */ + if (pin > (QE_PIO_PINS / 2) - 1) { + out_be32(&par_io->cpdir2, + ~pin_mask2bits & tmp_val); + tmp_val &= ~pin_mask2bits; + out_be32(&par_io->cpdir2, new_mask2bits | tmp_val); + } else { + out_be32(&par_io->cpdir1, + ~pin_mask2bits & tmp_val); + tmp_val &= ~pin_mask2bits; + out_be32(&par_io->cpdir1, new_mask2bits | tmp_val); + } + /* define pin assignment */ + tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ? + in_be32(&par_io->cppar2) : + in_be32(&par_io->cppar1); + + new_mask2bits = (u32) (assignment << (QE_PIO_PINS - + (pin % (QE_PIO_PINS / 2) + 1) * 2)); + /* clear and set 2 bits mask */ + if (pin > (QE_PIO_PINS / 2) - 1) { + out_be32(&par_io->cppar2, + ~pin_mask2bits & tmp_val); + tmp_val &= ~pin_mask2bits; + out_be32(&par_io->cppar2, new_mask2bits | tmp_val); + } else { + out_be32(&par_io->cppar1, + ~pin_mask2bits & tmp_val); + tmp_val &= ~pin_mask2bits; + out_be32(&par_io->cppar1, new_mask2bits | tmp_val); + } +} +EXPORT_SYMBOL(__par_io_config_pin); + +int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain, + int assignment, int has_irq) +{ + if (!par_io || port >= num_par_io_ports) + return -EINVAL; + + __par_io_config_pin(&par_io[port], pin, dir, open_drain, assignment, + has_irq); + return 0; +} +EXPORT_SYMBOL(par_io_config_pin); + +int par_io_data_set(u8 port, u8 pin, u8 val) +{ + u32 pin_mask, tmp_val; + + if (port >= num_par_io_ports) + return -EINVAL; + if (pin >= QE_PIO_PINS) + return -EINVAL; + /* calculate pin location */ + pin_mask = (u32) (1 << (QE_PIO_PINS - 1 - pin)); + + tmp_val = in_be32(&par_io[port].cpdata); + + if (val == 0) /* clear */ + out_be32(&par_io[port].cpdata, ~pin_mask & tmp_val); + else /* set */ + out_be32(&par_io[port].cpdata, pin_mask | tmp_val); + + return 0; +} +EXPORT_SYMBOL(par_io_data_set); + +int par_io_of_config(struct device_node *np) +{ + struct device_node *pio; + const phandle *ph; + int pio_map_len; + const unsigned int *pio_map; + + if (par_io == NULL) { + printk(KERN_ERR "par_io not initialized\n"); + return -1; + } + + ph = of_get_property(np, "pio-handle", NULL); + if (ph == NULL) { + printk(KERN_ERR "pio-handle not available\n"); + return -1; + } + + pio = of_find_node_by_phandle(*ph); + + pio_map = of_get_property(pio, "pio-map", &pio_map_len); + if (pio_map == NULL) { + printk(KERN_ERR "pio-map is not set!\n"); + return -1; + } + pio_map_len /= sizeof(unsigned int); + if ((pio_map_len % 6) != 0) { + printk(KERN_ERR "pio-map format wrong!\n"); + return -1; + } + + while (pio_map_len > 0) { + par_io_config_pin((u8) pio_map[0], (u8) pio_map[1], + (int) pio_map[2], (int) pio_map[3], + (int) pio_map[4], (int) pio_map[5]); + pio_map += 6; + pio_map_len -= 6; + } + of_node_put(pio); + return 0; +} +EXPORT_SYMBOL(par_io_of_config); diff --git a/drivers/soc/fsl/qe/ucc.c b/drivers/soc/fsl/qe/ucc.c new file mode 100644 index 000000000000..b59d3358f9bd --- /dev/null +++ b/drivers/soc/fsl/qe/ucc.c @@ -0,0 +1,212 @@ +/* + * arch/powerpc/sysdev/qe_lib/ucc.c + * + * QE UCC API Set - UCC specific routines implementations. + * + * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish <gridish@freescale.com> + * Li Yang <leoli@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/stddef.h> +#include <linux/spinlock.h> +#include <linux/export.h> + +#include <asm/irq.h> +#include <asm/io.h> +#include <soc/fsl/qe/immap_qe.h> +#include <soc/fsl/qe/qe.h> +#include <soc/fsl/qe/ucc.h> + +int ucc_set_qe_mux_mii_mng(unsigned int ucc_num) +{ + unsigned long flags; + + if (ucc_num > UCC_MAX_NUM - 1) + return -EINVAL; + + spin_lock_irqsave(&cmxgcr_lock, flags); + clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG, + ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT); + spin_unlock_irqrestore(&cmxgcr_lock, flags); + + return 0; +} +EXPORT_SYMBOL(ucc_set_qe_mux_mii_mng); + +/* Configure the UCC to either Slow or Fast. + * + * A given UCC can be figured to support either "slow" devices (e.g. UART) + * or "fast" devices (e.g. Ethernet). + * + * 'ucc_num' is the UCC number, from 0 - 7. + * + * This function also sets the UCC_GUEMR_SET_RESERVED3 bit because that bit + * must always be set to 1. + */ +int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed) +{ + u8 __iomem *guemr; + + /* The GUEMR register is at the same location for both slow and fast + devices, so we just use uccX.slow.guemr. */ + switch (ucc_num) { + case 0: guemr = &qe_immr->ucc1.slow.guemr; + break; + case 1: guemr = &qe_immr->ucc2.slow.guemr; + break; + case 2: guemr = &qe_immr->ucc3.slow.guemr; + break; + case 3: guemr = &qe_immr->ucc4.slow.guemr; + break; + case 4: guemr = &qe_immr->ucc5.slow.guemr; + break; + case 5: guemr = &qe_immr->ucc6.slow.guemr; + break; + case 6: guemr = &qe_immr->ucc7.slow.guemr; + break; + case 7: guemr = &qe_immr->ucc8.slow.guemr; + break; + default: + return -EINVAL; + } + + clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK, + UCC_GUEMR_SET_RESERVED3 | speed); + + return 0; +} + +static void get_cmxucr_reg(unsigned int ucc_num, __be32 __iomem **cmxucr, + unsigned int *reg_num, unsigned int *shift) +{ + unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3); + + *reg_num = cmx + 1; + *cmxucr = &qe_immr->qmx.cmxucr[cmx]; + *shift = 16 - 8 * (ucc_num & 2); +} + +int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask) +{ + __be32 __iomem *cmxucr; + unsigned int reg_num; + unsigned int shift; + + /* check if the UCC number is in range. */ + if (ucc_num > UCC_MAX_NUM - 1) + return -EINVAL; + + get_cmxucr_reg(ucc_num, &cmxucr, ®_num, &shift); + + if (set) + setbits32(cmxucr, mask << shift); + else + clrbits32(cmxucr, mask << shift); + + return 0; +} + +int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock, + enum comm_dir mode) +{ + __be32 __iomem *cmxucr; + unsigned int reg_num; + unsigned int shift; + u32 clock_bits = 0; + + /* check if the UCC number is in range. */ + if (ucc_num > UCC_MAX_NUM - 1) + return -EINVAL; + + /* The communications direction must be RX or TX */ + if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) + return -EINVAL; + + get_cmxucr_reg(ucc_num, &cmxucr, ®_num, &shift); + + switch (reg_num) { + case 1: + switch (clock) { + case QE_BRG1: clock_bits = 1; break; + case QE_BRG2: clock_bits = 2; break; + case QE_BRG7: clock_bits = 3; break; + case QE_BRG8: clock_bits = 4; break; + case QE_CLK9: clock_bits = 5; break; + case QE_CLK10: clock_bits = 6; break; + case QE_CLK11: clock_bits = 7; break; + case QE_CLK12: clock_bits = 8; break; + case QE_CLK15: clock_bits = 9; break; + case QE_CLK16: clock_bits = 10; break; + default: break; + } + break; + case 2: + switch (clock) { + case QE_BRG5: clock_bits = 1; break; + case QE_BRG6: clock_bits = 2; break; + case QE_BRG7: clock_bits = 3; break; + case QE_BRG8: clock_bits = 4; break; + case QE_CLK13: clock_bits = 5; break; + case QE_CLK14: clock_bits = 6; break; + case QE_CLK19: clock_bits = 7; break; + case QE_CLK20: clock_bits = 8; break; + case QE_CLK15: clock_bits = 9; break; + case QE_CLK16: clock_bits = 10; break; + default: break; + } + break; + case 3: + switch (clock) { + case QE_BRG9: clock_bits = 1; break; + case QE_BRG10: clock_bits = 2; break; + case QE_BRG15: clock_bits = 3; break; + case QE_BRG16: clock_bits = 4; break; + case QE_CLK3: clock_bits = 5; break; + case QE_CLK4: clock_bits = 6; break; + case QE_CLK17: clock_bits = 7; break; + case QE_CLK18: clock_bits = 8; break; + case QE_CLK7: clock_bits = 9; break; + case QE_CLK8: clock_bits = 10; break; + case QE_CLK16: clock_bits = 11; break; + default: break; + } + break; + case 4: + switch (clock) { + case QE_BRG13: clock_bits = 1; break; + case QE_BRG14: clock_bits = 2; break; + case QE_BRG15: clock_bits = 3; break; + case QE_BRG16: clock_bits = 4; break; + case QE_CLK5: clock_bits = 5; break; + case QE_CLK6: clock_bits = 6; break; + case QE_CLK21: clock_bits = 7; break; + case QE_CLK22: clock_bits = 8; break; + case QE_CLK7: clock_bits = 9; break; + case QE_CLK8: clock_bits = 10; break; + case QE_CLK16: clock_bits = 11; break; + default: break; + } + break; + default: break; + } + + /* Check for invalid combination of clock and UCC number */ + if (!clock_bits) + return -ENOENT; + + if (mode == COMM_DIR_RX) + shift += 4; + + clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift, + clock_bits << shift); + + return 0; +} diff --git a/drivers/soc/fsl/qe/ucc_fast.c b/drivers/soc/fsl/qe/ucc_fast.c new file mode 100644 index 000000000000..a7689310fe40 --- /dev/null +++ b/drivers/soc/fsl/qe/ucc_fast.c @@ -0,0 +1,363 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish <gridish@freescale.com> + * Li Yang <leoli@freescale.com> + * + * Description: + * QE UCC Fast API Set - UCC Fast specific routines implementations. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/stddef.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <linux/export.h> + +#include <asm/io.h> +#include <soc/fsl/qe/immap_qe.h> +#include <soc/fsl/qe/qe.h> + +#include <soc/fsl/qe/ucc.h> +#include <soc/fsl/qe/ucc_fast.h> + +void ucc_fast_dump_regs(struct ucc_fast_private * uccf) +{ + printk(KERN_INFO "UCC%u Fast registers:\n", uccf->uf_info->ucc_num); + printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs); + + printk(KERN_INFO "gumr : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr)); + printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr)); + printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr)); + printk(KERN_INFO "udsr : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr)); + printk(KERN_INFO "ucce : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce)); + printk(KERN_INFO "uccm : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm)); + printk(KERN_INFO "uccs : addr=0x%p, val=0x%02x\n", + &uccf->uf_regs->uccs, in_8(&uccf->uf_regs->uccs)); + printk(KERN_INFO "urfb : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb)); + printk(KERN_INFO "urfs : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs)); + printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet)); + printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset)); + printk(KERN_INFO "utfb : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb)); + printk(KERN_INFO "utfs : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs)); + printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet)); + printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt)); + printk(KERN_INFO "utpt : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt)); + printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry)); + printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n", + &uccf->uf_regs->guemr, in_8(&uccf->uf_regs->guemr)); +} +EXPORT_SYMBOL(ucc_fast_dump_regs); + +u32 ucc_fast_get_qe_cr_subblock(int uccf_num) +{ + switch (uccf_num) { + case 0: return QE_CR_SUBBLOCK_UCCFAST1; + case 1: return QE_CR_SUBBLOCK_UCCFAST2; + case 2: return QE_CR_SUBBLOCK_UCCFAST3; + case 3: return QE_CR_SUBBLOCK_UCCFAST4; + case 4: return QE_CR_SUBBLOCK_UCCFAST5; + case 5: return QE_CR_SUBBLOCK_UCCFAST6; + case 6: return QE_CR_SUBBLOCK_UCCFAST7; + case 7: return QE_CR_SUBBLOCK_UCCFAST8; + default: return QE_CR_SUBBLOCK_INVALID; + } +} +EXPORT_SYMBOL(ucc_fast_get_qe_cr_subblock); + +void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf) +{ + out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD); +} +EXPORT_SYMBOL(ucc_fast_transmit_on_demand); + +void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode) +{ + struct ucc_fast __iomem *uf_regs; + u32 gumr; + + uf_regs = uccf->uf_regs; + + /* Enable reception and/or transmission on this UCC. */ + gumr = in_be32(&uf_regs->gumr); + if (mode & COMM_DIR_TX) { + gumr |= UCC_FAST_GUMR_ENT; + uccf->enabled_tx = 1; + } + if (mode & COMM_DIR_RX) { + gumr |= UCC_FAST_GUMR_ENR; + uccf->enabled_rx = 1; + } + out_be32(&uf_regs->gumr, gumr); +} +EXPORT_SYMBOL(ucc_fast_enable); + +void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode) +{ + struct ucc_fast __iomem *uf_regs; + u32 gumr; + + uf_regs = uccf->uf_regs; + + /* Disable reception and/or transmission on this UCC. */ + gumr = in_be32(&uf_regs->gumr); + if (mode & COMM_DIR_TX) { + gumr &= ~UCC_FAST_GUMR_ENT; + uccf->enabled_tx = 0; + } + if (mode & COMM_DIR_RX) { + gumr &= ~UCC_FAST_GUMR_ENR; + uccf->enabled_rx = 0; + } + out_be32(&uf_regs->gumr, gumr); +} +EXPORT_SYMBOL(ucc_fast_disable); + +int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret) +{ + struct ucc_fast_private *uccf; + struct ucc_fast __iomem *uf_regs; + u32 gumr; + int ret; + + if (!uf_info) + return -EINVAL; + + /* check if the UCC port number is in range. */ + if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) { + printk(KERN_ERR "%s: illegal UCC number\n", __func__); + return -EINVAL; + } + + /* Check that 'max_rx_buf_length' is properly aligned (4). */ + if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) { + printk(KERN_ERR "%s: max_rx_buf_length not aligned\n", + __func__); + return -EINVAL; + } + + /* Validate Virtual Fifo register values */ + if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) { + printk(KERN_ERR "%s: urfs is too small\n", __func__); + return -EINVAL; + } + + if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + printk(KERN_ERR "%s: urfs is not aligned\n", __func__); + return -EINVAL; + } + + if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + printk(KERN_ERR "%s: urfet is not aligned.\n", __func__); + return -EINVAL; + } + + if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + printk(KERN_ERR "%s: urfset is not aligned\n", __func__); + return -EINVAL; + } + + if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + printk(KERN_ERR "%s: utfs is not aligned\n", __func__); + return -EINVAL; + } + + if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + printk(KERN_ERR "%s: utfet is not aligned\n", __func__); + return -EINVAL; + } + + if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + printk(KERN_ERR "%s: utftt is not aligned\n", __func__); + return -EINVAL; + } + + uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL); + if (!uccf) { + printk(KERN_ERR "%s: Cannot allocate private data\n", + __func__); + return -ENOMEM; + } + + /* Fill fast UCC structure */ + uccf->uf_info = uf_info; + /* Set the PHY base address */ + uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast)); + if (uccf->uf_regs == NULL) { + printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__); + kfree(uccf); + return -ENOMEM; + } + + uccf->enabled_tx = 0; + uccf->enabled_rx = 0; + uccf->stopped_tx = 0; + uccf->stopped_rx = 0; + uf_regs = uccf->uf_regs; + uccf->p_ucce = &uf_regs->ucce; + uccf->p_uccm = &uf_regs->uccm; +#ifdef CONFIG_UGETH_TX_ON_DEMAND + uccf->p_utodr = &uf_regs->utodr; +#endif +#ifdef STATISTICS + uccf->tx_frames = 0; + uccf->rx_frames = 0; + uccf->rx_discarded = 0; +#endif /* STATISTICS */ + + /* Set UCC to fast type */ + ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST); + if (ret) { + printk(KERN_ERR "%s: cannot set UCC type\n", __func__); + ucc_fast_free(uccf); + return ret; + } + + uccf->mrblr = uf_info->max_rx_buf_length; + + /* Set GUMR */ + /* For more details see the hardware spec. */ + gumr = uf_info->ttx_trx; + if (uf_info->tci) + gumr |= UCC_FAST_GUMR_TCI; + if (uf_info->cdp) + gumr |= UCC_FAST_GUMR_CDP; + if (uf_info->ctsp) + gumr |= UCC_FAST_GUMR_CTSP; + if (uf_info->cds) + gumr |= UCC_FAST_GUMR_CDS; + if (uf_info->ctss) + gumr |= UCC_FAST_GUMR_CTSS; + if (uf_info->txsy) + gumr |= UCC_FAST_GUMR_TXSY; + if (uf_info->rsyn) + gumr |= UCC_FAST_GUMR_RSYN; + gumr |= uf_info->synl; + if (uf_info->rtsm) + gumr |= UCC_FAST_GUMR_RTSM; + gumr |= uf_info->renc; + if (uf_info->revd) + gumr |= UCC_FAST_GUMR_REVD; + gumr |= uf_info->tenc; + gumr |= uf_info->tcrc; + gumr |= uf_info->mode; + out_be32(&uf_regs->gumr, gumr); + + /* Allocate memory for Tx Virtual Fifo */ + uccf->ucc_fast_tx_virtual_fifo_base_offset = + qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); + if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) { + printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n", + __func__); + uccf->ucc_fast_tx_virtual_fifo_base_offset = 0; + ucc_fast_free(uccf); + return -ENOMEM; + } + + /* Allocate memory for Rx Virtual Fifo */ + uccf->ucc_fast_rx_virtual_fifo_base_offset = + qe_muram_alloc(uf_info->urfs + + UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR, + UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); + if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) { + printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n", + __func__); + uccf->ucc_fast_rx_virtual_fifo_base_offset = 0; + ucc_fast_free(uccf); + return -ENOMEM; + } + + /* Set Virtual Fifo registers */ + out_be16(&uf_regs->urfs, uf_info->urfs); + out_be16(&uf_regs->urfet, uf_info->urfet); + out_be16(&uf_regs->urfset, uf_info->urfset); + out_be16(&uf_regs->utfs, uf_info->utfs); + out_be16(&uf_regs->utfet, uf_info->utfet); + out_be16(&uf_regs->utftt, uf_info->utftt); + /* utfb, urfb are offsets from MURAM base */ + out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset); + out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset); + + /* Mux clocking */ + /* Grant Support */ + ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support); + /* Breakpoint Support */ + ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support); + /* Set Tsa or NMSI mode. */ + ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa); + /* If NMSI (not Tsa), set Tx and Rx clock. */ + if (!uf_info->tsa) { + /* Rx clock routing */ + if ((uf_info->rx_clock != QE_CLK_NONE) && + ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock, + COMM_DIR_RX)) { + printk(KERN_ERR "%s: illegal value for RX clock\n", + __func__); + ucc_fast_free(uccf); + return -EINVAL; + } + /* Tx clock routing */ + if ((uf_info->tx_clock != QE_CLK_NONE) && + ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock, + COMM_DIR_TX)) { + printk(KERN_ERR "%s: illegal value for TX clock\n", + __func__); + ucc_fast_free(uccf); + return -EINVAL; + } + } + + /* Set interrupt mask register at UCC level. */ + out_be32(&uf_regs->uccm, uf_info->uccm_mask); + + /* First, clear anything pending at UCC level, + * otherwise, old garbage may come through + * as soon as the dam is opened. */ + + /* Writing '1' clears */ + out_be32(&uf_regs->ucce, 0xffffffff); + + *uccf_ret = uccf; + return 0; +} +EXPORT_SYMBOL(ucc_fast_init); + +void ucc_fast_free(struct ucc_fast_private * uccf) +{ + if (!uccf) + return; + + if (uccf->ucc_fast_tx_virtual_fifo_base_offset) + qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset); + + if (uccf->ucc_fast_rx_virtual_fifo_base_offset) + qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset); + + if (uccf->uf_regs) + iounmap(uccf->uf_regs); + + kfree(uccf); +} +EXPORT_SYMBOL(ucc_fast_free); diff --git a/drivers/soc/fsl/qe/ucc_slow.c b/drivers/soc/fsl/qe/ucc_slow.c new file mode 100644 index 000000000000..9334bdbd9b30 --- /dev/null +++ b/drivers/soc/fsl/qe/ucc_slow.c @@ -0,0 +1,374 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish <gridish@freescale.com> + * Li Yang <leoli@freescale.com> + * + * Description: + * QE UCC Slow API Set - UCC Slow specific routines implementations. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/stddef.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <linux/export.h> + +#include <asm/io.h> +#include <soc/fsl/qe/immap_qe.h> +#include <soc/fsl/qe/qe.h> + +#include <soc/fsl/qe/ucc.h> +#include <soc/fsl/qe/ucc_slow.h> + +u32 ucc_slow_get_qe_cr_subblock(int uccs_num) +{ + switch (uccs_num) { + case 0: return QE_CR_SUBBLOCK_UCCSLOW1; + case 1: return QE_CR_SUBBLOCK_UCCSLOW2; + case 2: return QE_CR_SUBBLOCK_UCCSLOW3; + case 3: return QE_CR_SUBBLOCK_UCCSLOW4; + case 4: return QE_CR_SUBBLOCK_UCCSLOW5; + case 5: return QE_CR_SUBBLOCK_UCCSLOW6; + case 6: return QE_CR_SUBBLOCK_UCCSLOW7; + case 7: return QE_CR_SUBBLOCK_UCCSLOW8; + default: return QE_CR_SUBBLOCK_INVALID; + } +} +EXPORT_SYMBOL(ucc_slow_get_qe_cr_subblock); + +void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs) +{ + struct ucc_slow_info *us_info = uccs->us_info; + u32 id; + + id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); + qe_issue_cmd(QE_GRACEFUL_STOP_TX, id, + QE_CR_PROTOCOL_UNSPECIFIED, 0); +} +EXPORT_SYMBOL(ucc_slow_graceful_stop_tx); + +void ucc_slow_stop_tx(struct ucc_slow_private * uccs) +{ + struct ucc_slow_info *us_info = uccs->us_info; + u32 id; + + id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); + qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); +} +EXPORT_SYMBOL(ucc_slow_stop_tx); + +void ucc_slow_restart_tx(struct ucc_slow_private * uccs) +{ + struct ucc_slow_info *us_info = uccs->us_info; + u32 id; + + id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); + qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); +} +EXPORT_SYMBOL(ucc_slow_restart_tx); + +void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode) +{ + struct ucc_slow *us_regs; + u32 gumr_l; + + us_regs = uccs->us_regs; + + /* Enable reception and/or transmission on this UCC. */ + gumr_l = in_be32(&us_regs->gumr_l); + if (mode & COMM_DIR_TX) { + gumr_l |= UCC_SLOW_GUMR_L_ENT; + uccs->enabled_tx = 1; + } + if (mode & COMM_DIR_RX) { + gumr_l |= UCC_SLOW_GUMR_L_ENR; + uccs->enabled_rx = 1; + } + out_be32(&us_regs->gumr_l, gumr_l); +} +EXPORT_SYMBOL(ucc_slow_enable); + +void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode) +{ + struct ucc_slow *us_regs; + u32 gumr_l; + + us_regs = uccs->us_regs; + + /* Disable reception and/or transmission on this UCC. */ + gumr_l = in_be32(&us_regs->gumr_l); + if (mode & COMM_DIR_TX) { + gumr_l &= ~UCC_SLOW_GUMR_L_ENT; + uccs->enabled_tx = 0; + } + if (mode & COMM_DIR_RX) { + gumr_l &= ~UCC_SLOW_GUMR_L_ENR; + uccs->enabled_rx = 0; + } + out_be32(&us_regs->gumr_l, gumr_l); +} +EXPORT_SYMBOL(ucc_slow_disable); + +/* Initialize the UCC for Slow operations + * + * The caller should initialize the following us_info + */ +int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret) +{ + struct ucc_slow_private *uccs; + u32 i; + struct ucc_slow __iomem *us_regs; + u32 gumr; + struct qe_bd *bd; + u32 id; + u32 command; + int ret = 0; + + if (!us_info) + return -EINVAL; + + /* check if the UCC port number is in range. */ + if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) { + printk(KERN_ERR "%s: illegal UCC number\n", __func__); + return -EINVAL; + } + + /* + * Set mrblr + * Check that 'max_rx_buf_length' is properly aligned (4), unless + * rfw is 1, meaning that QE accepts one byte at a time, unlike normal + * case when QE accepts 32 bits at a time. + */ + if ((!us_info->rfw) && + (us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) { + printk(KERN_ERR "max_rx_buf_length not aligned.\n"); + return -EINVAL; + } + + uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL); + if (!uccs) { + printk(KERN_ERR "%s: Cannot allocate private data\n", + __func__); + return -ENOMEM; + } + + /* Fill slow UCC structure */ + uccs->us_info = us_info; + /* Set the PHY base address */ + uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow)); + if (uccs->us_regs == NULL) { + printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__); + kfree(uccs); + return -ENOMEM; + } + + uccs->saved_uccm = 0; + uccs->p_rx_frame = 0; + us_regs = uccs->us_regs; + uccs->p_ucce = (u16 *) & (us_regs->ucce); + uccs->p_uccm = (u16 *) & (us_regs->uccm); +#ifdef STATISTICS + uccs->rx_frames = 0; + uccs->tx_frames = 0; + uccs->rx_discarded = 0; +#endif /* STATISTICS */ + + /* Get PRAM base */ + uccs->us_pram_offset = + qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM); + if (IS_ERR_VALUE(uccs->us_pram_offset)) { + printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__); + ucc_slow_free(uccs); + return -ENOMEM; + } + id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); + qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, us_info->protocol, + uccs->us_pram_offset); + + uccs->us_pram = qe_muram_addr(uccs->us_pram_offset); + + /* Set UCC to slow type */ + ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW); + if (ret) { + printk(KERN_ERR "%s: cannot set UCC type", __func__); + ucc_slow_free(uccs); + return ret; + } + + out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length); + + INIT_LIST_HEAD(&uccs->confQ); + + /* Allocate BDs. */ + uccs->rx_base_offset = + qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd), + QE_ALIGNMENT_OF_BD); + if (IS_ERR_VALUE(uccs->rx_base_offset)) { + printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__, + us_info->rx_bd_ring_len); + uccs->rx_base_offset = 0; + ucc_slow_free(uccs); + return -ENOMEM; + } + + uccs->tx_base_offset = + qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd), + QE_ALIGNMENT_OF_BD); + if (IS_ERR_VALUE(uccs->tx_base_offset)) { + printk(KERN_ERR "%s: cannot allocate TX BDs", __func__); + uccs->tx_base_offset = 0; + ucc_slow_free(uccs); + return -ENOMEM; + } + + /* Init Tx bds */ + bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset); + for (i = 0; i < us_info->tx_bd_ring_len - 1; i++) { + /* clear bd buffer */ + out_be32(&bd->buf, 0); + /* set bd status and length */ + out_be32((u32 *) bd, 0); + bd++; + } + /* for last BD set Wrap bit */ + out_be32(&bd->buf, 0); + out_be32((u32 *) bd, cpu_to_be32(T_W)); + + /* Init Rx bds */ + bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset); + for (i = 0; i < us_info->rx_bd_ring_len - 1; i++) { + /* set bd status and length */ + out_be32((u32*)bd, 0); + /* clear bd buffer */ + out_be32(&bd->buf, 0); + bd++; + } + /* for last BD set Wrap bit */ + out_be32((u32*)bd, cpu_to_be32(R_W)); + out_be32(&bd->buf, 0); + + /* Set GUMR (For more details see the hardware spec.). */ + /* gumr_h */ + gumr = us_info->tcrc; + if (us_info->cdp) + gumr |= UCC_SLOW_GUMR_H_CDP; + if (us_info->ctsp) + gumr |= UCC_SLOW_GUMR_H_CTSP; + if (us_info->cds) + gumr |= UCC_SLOW_GUMR_H_CDS; + if (us_info->ctss) + gumr |= UCC_SLOW_GUMR_H_CTSS; + if (us_info->tfl) + gumr |= UCC_SLOW_GUMR_H_TFL; + if (us_info->rfw) + gumr |= UCC_SLOW_GUMR_H_RFW; + if (us_info->txsy) + gumr |= UCC_SLOW_GUMR_H_TXSY; + if (us_info->rtsm) + gumr |= UCC_SLOW_GUMR_H_RTSM; + out_be32(&us_regs->gumr_h, gumr); + + /* gumr_l */ + gumr = us_info->tdcr | us_info->rdcr | us_info->tenc | us_info->renc | + us_info->diag | us_info->mode; + if (us_info->tci) + gumr |= UCC_SLOW_GUMR_L_TCI; + if (us_info->rinv) + gumr |= UCC_SLOW_GUMR_L_RINV; + if (us_info->tinv) + gumr |= UCC_SLOW_GUMR_L_TINV; + if (us_info->tend) + gumr |= UCC_SLOW_GUMR_L_TEND; + out_be32(&us_regs->gumr_l, gumr); + + /* Function code registers */ + + /* if the data is in cachable memory, the 'global' */ + /* in the function code should be set. */ + uccs->us_pram->tbmr = UCC_BMR_BO_BE; + uccs->us_pram->rbmr = UCC_BMR_BO_BE; + + /* rbase, tbase are offsets from MURAM base */ + out_be16(&uccs->us_pram->rbase, uccs->rx_base_offset); + out_be16(&uccs->us_pram->tbase, uccs->tx_base_offset); + + /* Mux clocking */ + /* Grant Support */ + ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support); + /* Breakpoint Support */ + ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support); + /* Set Tsa or NMSI mode. */ + ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa); + /* If NMSI (not Tsa), set Tx and Rx clock. */ + if (!us_info->tsa) { + /* Rx clock routing */ + if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock, + COMM_DIR_RX)) { + printk(KERN_ERR "%s: illegal value for RX clock\n", + __func__); + ucc_slow_free(uccs); + return -EINVAL; + } + /* Tx clock routing */ + if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock, + COMM_DIR_TX)) { + printk(KERN_ERR "%s: illegal value for TX clock\n", + __func__); + ucc_slow_free(uccs); + return -EINVAL; + } + } + + /* Set interrupt mask register at UCC level. */ + out_be16(&us_regs->uccm, us_info->uccm_mask); + + /* First, clear anything pending at UCC level, + * otherwise, old garbage may come through + * as soon as the dam is opened. */ + + /* Writing '1' clears */ + out_be16(&us_regs->ucce, 0xffff); + + /* Issue QE Init command */ + if (us_info->init_tx && us_info->init_rx) + command = QE_INIT_TX_RX; + else if (us_info->init_tx) + command = QE_INIT_TX; + else + command = QE_INIT_RX; /* We know at least one is TRUE */ + + qe_issue_cmd(command, id, us_info->protocol, 0); + + *uccs_ret = uccs; + return 0; +} +EXPORT_SYMBOL(ucc_slow_init); + +void ucc_slow_free(struct ucc_slow_private * uccs) +{ + if (!uccs) + return; + + if (uccs->rx_base_offset) + qe_muram_free(uccs->rx_base_offset); + + if (uccs->tx_base_offset) + qe_muram_free(uccs->tx_base_offset); + + if (uccs->us_pram) + qe_muram_free(uccs->us_pram_offset); + + if (uccs->us_regs) + iounmap(uccs->us_regs); + + kfree(uccs); +} +EXPORT_SYMBOL(ucc_slow_free); + diff --git a/drivers/soc/fsl/qe/usb.c b/drivers/soc/fsl/qe/usb.c new file mode 100644 index 000000000000..111f7ab80f04 --- /dev/null +++ b/drivers/soc/fsl/qe/usb.c @@ -0,0 +1,56 @@ +/* + * QE USB routines + * + * Copyright 2006 Freescale Semiconductor, Inc. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/export.h> +#include <linux/io.h> +#include <soc/fsl/qe/immap_qe.h> +#include <soc/fsl/qe/qe.h> + +int qe_usb_clock_set(enum qe_clock clk, int rate) +{ + struct qe_mux __iomem *mux = &qe_immr->qmx; + unsigned long flags; + u32 val; + + switch (clk) { + case QE_CLK3: val = QE_CMXGCR_USBCS_CLK3; break; + case QE_CLK5: val = QE_CMXGCR_USBCS_CLK5; break; + case QE_CLK7: val = QE_CMXGCR_USBCS_CLK7; break; + case QE_CLK9: val = QE_CMXGCR_USBCS_CLK9; break; + case QE_CLK13: val = QE_CMXGCR_USBCS_CLK13; break; + case QE_CLK17: val = QE_CMXGCR_USBCS_CLK17; break; + case QE_CLK19: val = QE_CMXGCR_USBCS_CLK19; break; + case QE_CLK21: val = QE_CMXGCR_USBCS_CLK21; break; + case QE_BRG9: val = QE_CMXGCR_USBCS_BRG9; break; + case QE_BRG10: val = QE_CMXGCR_USBCS_BRG10; break; + default: + pr_err("%s: requested unknown clock %d\n", __func__, clk); + return -EINVAL; + } + + if (qe_clock_is_brg(clk)) + qe_setbrg(clk, rate, 1); + + spin_lock_irqsave(&cmxgcr_lock, flags); + + clrsetbits_be32(&mux->cmxgcr, QE_CMXGCR_USBCS, val); + + spin_unlock_irqrestore(&cmxgcr_lock, flags); + + return 0; +} +EXPORT_SYMBOL(qe_usb_clock_set); diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c index b04b05a0904e..0ad66fa9bb1a 100644 --- a/drivers/soc/qcom/spm.c +++ b/drivers/soc/qcom/spm.c @@ -116,7 +116,7 @@ static const struct spm_reg_data spm_reg_8064_cpu = { static DEFINE_PER_CPU(struct spm_driver_data *, cpu_spm_drv); -typedef int (*idle_fn)(int); +typedef int (*idle_fn)(void); static DEFINE_PER_CPU(idle_fn*, qcom_idle_ops); static inline void spm_register_write(struct spm_driver_data *drv, @@ -179,10 +179,10 @@ static int qcom_pm_collapse(unsigned long int unused) return -1; } -static int qcom_cpu_spc(int cpu) +static int qcom_cpu_spc(void) { int ret; - struct spm_driver_data *drv = per_cpu(cpu_spm_drv, cpu); + struct spm_driver_data *drv = __this_cpu_read(cpu_spm_drv); spm_set_low_power_mode(drv, PM_SLEEP_MODE_SPC); ret = cpu_suspend(0, qcom_pm_collapse); @@ -197,9 +197,9 @@ static int qcom_cpu_spc(int cpu) return ret; } -static int qcom_idle_enter(int cpu, unsigned long index) +static int qcom_idle_enter(unsigned long index) { - return per_cpu(qcom_idle_ops, cpu)[index](cpu); + return __this_cpu_read(qcom_idle_ops)[index](); } static const struct of_device_id qcom_idle_state_match[] __initconst = { diff --git a/drivers/soc/ti/knav_dma.c b/drivers/soc/ti/knav_dma.c index bc1b80ec6afe..1a7b5caa127b 100644 --- a/drivers/soc/ti/knav_dma.c +++ b/drivers/soc/ti/knav_dma.c @@ -389,7 +389,7 @@ static int of_channel_match_helper(struct device_node *np, const char *name, *dma_instance = dma_node->name; index = of_property_match_string(np, "ti,navigator-dma-names", name); if (index < 0) { - dev_err(kdev->dev, "No 'ti,navigator-dma-names' propery\n"); + dev_err(kdev->dev, "No 'ti,navigator-dma-names' property\n"); return -ENODEV; } diff --git a/drivers/soc/versatile/soc-realview.c b/drivers/soc/versatile/soc-realview.c index e642c4540dda..c337764de867 100644 --- a/drivers/soc/versatile/soc-realview.c +++ b/drivers/soc/versatile/soc-realview.c @@ -36,6 +36,8 @@ static const char *realview_board_str(u32 id) switch ((id >> 16) & 0xfff) { case 0x0147: return "HBI-0147"; + case 0x0159: + return "HBI-0159"; default: return "Unknown"; } @@ -44,6 +46,8 @@ static const char *realview_board_str(u32 id) static const char *realview_arch_str(u32 id) { switch ((id >> 8) & 0xf) { + case 0x04: + return "AHB"; case 0x05: return "Multi-layer AXI"; default: |