aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-orion.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi/spi-orion.c')
-rw-r--r--drivers/spi/spi-orion.c77
1 files changed, 40 insertions, 37 deletions
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index d01a6adc726e..47ef6b1a2e76 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -20,6 +20,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/clk.h>
#include <linux/sizes.h>
#include <linux/gpio.h>
@@ -681,9 +682,9 @@ static int orion_spi_probe(struct platform_device *pdev)
goto out_rel_axi_clk;
}
- /* Scan all SPI devices of this controller for direct mapped devices */
for_each_available_child_of_node(pdev->dev.of_node, np) {
u32 cs;
+ int cs_gpio;
/* Get chip-select number from the "reg" property */
status = of_property_read_u32(np, "reg", &cs);
@@ -695,6 +696,44 @@ static int orion_spi_probe(struct platform_device *pdev)
}
/*
+ * Initialize the CS GPIO:
+ * - properly request the actual GPIO signal
+ * - de-assert the logical signal so that all GPIO CS lines
+ * are inactive when probing for slaves
+ * - find an unused physical CS which will be driven for any
+ * slave which uses a CS GPIO
+ */
+ cs_gpio = of_get_named_gpio(pdev->dev.of_node, "cs-gpios", cs);
+ if (cs_gpio > 0) {
+ char *gpio_name;
+ int cs_flags;
+
+ if (spi->unused_hw_gpio == -1) {
+ dev_info(&pdev->dev,
+ "Selected unused HW CS#%d for any GPIO CSes\n",
+ cs);
+ spi->unused_hw_gpio = cs;
+ }
+
+ gpio_name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
+ "%s-CS%d", dev_name(&pdev->dev), cs);
+ if (!gpio_name) {
+ status = -ENOMEM;
+ goto out_rel_axi_clk;
+ }
+
+ cs_flags = of_property_read_bool(np, "spi-cs-high") ?
+ GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH;
+ status = devm_gpio_request_one(&pdev->dev, cs_gpio,
+ cs_flags, gpio_name);
+ if (status) {
+ dev_err(&pdev->dev,
+ "Can't request GPIO for CS %d\n", cs);
+ goto out_rel_axi_clk;
+ }
+ }
+
+ /*
* Check if an address is configured for this SPI device. If
* not, the MBus mapping via the 'ranges' property in the 'soc'
* node is not configured and this device should not use the
@@ -740,44 +779,8 @@ static int orion_spi_probe(struct platform_device *pdev)
if (status < 0)
goto out_rel_pm;
- if (master->cs_gpios) {
- int i;
- for (i = 0; i < master->num_chipselect; ++i) {
- char *gpio_name;
-
- if (!gpio_is_valid(master->cs_gpios[i])) {
- continue;
- }
-
- gpio_name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
- "%s-CS%d", dev_name(&pdev->dev), i);
- if (!gpio_name) {
- status = -ENOMEM;
- goto out_rel_master;
- }
-
- status = devm_gpio_request(&pdev->dev,
- master->cs_gpios[i], gpio_name);
- if (status) {
- dev_err(&pdev->dev,
- "Can't request GPIO for CS %d\n",
- master->cs_gpios[i]);
- goto out_rel_master;
- }
- if (spi->unused_hw_gpio == -1) {
- dev_info(&pdev->dev,
- "Selected unused HW CS#%d for any GPIO CSes\n",
- i);
- spi->unused_hw_gpio = i;
- }
- }
- }
-
-
return status;
-out_rel_master:
- spi_unregister_master(master);
out_rel_pm:
pm_runtime_disable(&pdev->dev);
out_rel_axi_clk: