diff options
Diffstat (limited to 'drivers/spi/spi-stm32.c')
| -rw-r--r-- | drivers/spi/spi-stm32.c | 1403 |
1 files changed, 1072 insertions, 331 deletions
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index ad1e55d3d5d5..4186ed20d796 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -1,23 +1,10 @@ -/* - * STMicroelectronics STM32 SPI Controller driver (master mode only) - * - * Copyright (C) 2017, STMicroelectronics - All Rights Reserved - * Author(s): Amelie Delaunay <amelie.delaunay@st.com> for STMicroelectronics. - * - * License terms: GPL V2.0. - * - * spi_stm32 driver is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - * - * spi_stm32 driver is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License along with - * spi_stm32 driver. If not, see <http://www.gnu.org/licenses/>. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// STMicroelectronics STM32 SPI Controller driver (master mode only) +// +// Copyright (C) 2017, STMicroelectronics - All Rights Reserved +// Author(s): Amelie Delaunay <amelie.delaunay@st.com> for STMicroelectronics. + #include <linux/debugfs.h> #include <linux/clk.h> #include <linux/delay.h> @@ -33,99 +20,251 @@ #define DRIVER_NAME "spi_stm32" -/* STM32 SPI registers */ -#define STM32_SPI_CR1 0x00 -#define STM32_SPI_CR2 0x04 -#define STM32_SPI_CFG1 0x08 -#define STM32_SPI_CFG2 0x0C -#define STM32_SPI_IER 0x10 -#define STM32_SPI_SR 0x14 -#define STM32_SPI_IFCR 0x18 -#define STM32_SPI_TXDR 0x20 -#define STM32_SPI_RXDR 0x30 -#define STM32_SPI_I2SCFGR 0x50 - -/* STM32_SPI_CR1 bit fields */ -#define SPI_CR1_SPE BIT(0) -#define SPI_CR1_MASRX BIT(8) -#define SPI_CR1_CSTART BIT(9) -#define SPI_CR1_CSUSP BIT(10) -#define SPI_CR1_HDDIR BIT(11) -#define SPI_CR1_SSI BIT(12) - -/* STM32_SPI_CR2 bit fields */ -#define SPI_CR2_TSIZE_SHIFT 0 -#define SPI_CR2_TSIZE GENMASK(15, 0) - -/* STM32_SPI_CFG1 bit fields */ -#define SPI_CFG1_DSIZE_SHIFT 0 -#define SPI_CFG1_DSIZE GENMASK(4, 0) -#define SPI_CFG1_FTHLV_SHIFT 5 -#define SPI_CFG1_FTHLV GENMASK(8, 5) -#define SPI_CFG1_RXDMAEN BIT(14) -#define SPI_CFG1_TXDMAEN BIT(15) -#define SPI_CFG1_MBR_SHIFT 28 -#define SPI_CFG1_MBR GENMASK(30, 28) -#define SPI_CFG1_MBR_MIN 0 -#define SPI_CFG1_MBR_MAX (GENMASK(30, 28) >> 28) - -/* STM32_SPI_CFG2 bit fields */ -#define SPI_CFG2_MIDI_SHIFT 4 -#define SPI_CFG2_MIDI GENMASK(7, 4) -#define SPI_CFG2_COMM_SHIFT 17 -#define SPI_CFG2_COMM GENMASK(18, 17) -#define SPI_CFG2_SP_SHIFT 19 -#define SPI_CFG2_SP GENMASK(21, 19) -#define SPI_CFG2_MASTER BIT(22) -#define SPI_CFG2_LSBFRST BIT(23) -#define SPI_CFG2_CPHA BIT(24) -#define SPI_CFG2_CPOL BIT(25) -#define SPI_CFG2_SSM BIT(26) -#define SPI_CFG2_AFCNTR BIT(31) - -/* STM32_SPI_IER bit fields */ -#define SPI_IER_RXPIE BIT(0) -#define SPI_IER_TXPIE BIT(1) -#define SPI_IER_DXPIE BIT(2) -#define SPI_IER_EOTIE BIT(3) -#define SPI_IER_TXTFIE BIT(4) -#define SPI_IER_OVRIE BIT(6) -#define SPI_IER_MODFIE BIT(9) -#define SPI_IER_ALL GENMASK(10, 0) - -/* STM32_SPI_SR bit fields */ -#define SPI_SR_RXP BIT(0) -#define SPI_SR_TXP BIT(1) -#define SPI_SR_EOT BIT(3) -#define SPI_SR_OVR BIT(6) -#define SPI_SR_MODF BIT(9) -#define SPI_SR_SUSP BIT(11) -#define SPI_SR_RXPLVL_SHIFT 13 -#define SPI_SR_RXPLVL GENMASK(14, 13) -#define SPI_SR_RXWNE BIT(15) - -/* STM32_SPI_IFCR bit fields */ -#define SPI_IFCR_ALL GENMASK(11, 3) - -/* STM32_SPI_I2SCFGR bit fields */ -#define SPI_I2SCFGR_I2SMOD BIT(0) - -/* SPI Master Baud Rate min/max divisor */ -#define SPI_MBR_DIV_MIN (2 << SPI_CFG1_MBR_MIN) -#define SPI_MBR_DIV_MAX (2 << SPI_CFG1_MBR_MAX) - -/* SPI Communication mode */ +/* STM32F4 SPI registers */ +#define STM32F4_SPI_CR1 0x00 +#define STM32F4_SPI_CR2 0x04 +#define STM32F4_SPI_SR 0x08 +#define STM32F4_SPI_DR 0x0C +#define STM32F4_SPI_I2SCFGR 0x1C + +/* STM32F4_SPI_CR1 bit fields */ +#define STM32F4_SPI_CR1_CPHA BIT(0) +#define STM32F4_SPI_CR1_CPOL BIT(1) +#define STM32F4_SPI_CR1_MSTR BIT(2) +#define STM32F4_SPI_CR1_BR_SHIFT 3 +#define STM32F4_SPI_CR1_BR GENMASK(5, 3) +#define STM32F4_SPI_CR1_SPE BIT(6) +#define STM32F4_SPI_CR1_LSBFRST BIT(7) +#define STM32F4_SPI_CR1_SSI BIT(8) +#define STM32F4_SPI_CR1_SSM BIT(9) +#define STM32F4_SPI_CR1_RXONLY BIT(10) +#define STM32F4_SPI_CR1_DFF BIT(11) +#define STM32F4_SPI_CR1_CRCNEXT BIT(12) +#define STM32F4_SPI_CR1_CRCEN BIT(13) +#define STM32F4_SPI_CR1_BIDIOE BIT(14) +#define STM32F4_SPI_CR1_BIDIMODE BIT(15) +#define STM32F4_SPI_CR1_BR_MIN 0 +#define STM32F4_SPI_CR1_BR_MAX (GENMASK(5, 3) >> 3) + +/* STM32F4_SPI_CR2 bit fields */ +#define STM32F4_SPI_CR2_RXDMAEN BIT(0) +#define STM32F4_SPI_CR2_TXDMAEN BIT(1) +#define STM32F4_SPI_CR2_SSOE BIT(2) +#define STM32F4_SPI_CR2_FRF BIT(4) +#define STM32F4_SPI_CR2_ERRIE BIT(5) +#define STM32F4_SPI_CR2_RXNEIE BIT(6) +#define STM32F4_SPI_CR2_TXEIE BIT(7) + +/* STM32F4_SPI_SR bit fields */ +#define STM32F4_SPI_SR_RXNE BIT(0) +#define STM32F4_SPI_SR_TXE BIT(1) +#define STM32F4_SPI_SR_CHSIDE BIT(2) +#define STM32F4_SPI_SR_UDR BIT(3) +#define STM32F4_SPI_SR_CRCERR BIT(4) +#define STM32F4_SPI_SR_MODF BIT(5) +#define STM32F4_SPI_SR_OVR BIT(6) +#define STM32F4_SPI_SR_BSY BIT(7) +#define STM32F4_SPI_SR_FRE BIT(8) + +/* STM32F4_SPI_I2SCFGR bit fields */ +#define STM32F4_SPI_I2SCFGR_I2SMOD BIT(11) + +/* STM32F4 SPI Baud Rate min/max divisor */ +#define STM32F4_SPI_BR_DIV_MIN (2 << STM32F4_SPI_CR1_BR_MIN) +#define STM32F4_SPI_BR_DIV_MAX (2 << STM32F4_SPI_CR1_BR_MAX) + +/* STM32H7 SPI registers */ +#define STM32H7_SPI_CR1 0x00 +#define STM32H7_SPI_CR2 0x04 +#define STM32H7_SPI_CFG1 0x08 +#define STM32H7_SPI_CFG2 0x0C +#define STM32H7_SPI_IER 0x10 +#define STM32H7_SPI_SR 0x14 +#define STM32H7_SPI_IFCR 0x18 +#define STM32H7_SPI_TXDR 0x20 +#define STM32H7_SPI_RXDR 0x30 +#define STM32H7_SPI_I2SCFGR 0x50 + +/* STM32H7_SPI_CR1 bit fields */ +#define STM32H7_SPI_CR1_SPE BIT(0) +#define STM32H7_SPI_CR1_MASRX BIT(8) +#define STM32H7_SPI_CR1_CSTART BIT(9) +#define STM32H7_SPI_CR1_CSUSP BIT(10) +#define STM32H7_SPI_CR1_HDDIR BIT(11) +#define STM32H7_SPI_CR1_SSI BIT(12) + +/* STM32H7_SPI_CR2 bit fields */ +#define STM32H7_SPI_CR2_TSIZE_SHIFT 0 +#define STM32H7_SPI_CR2_TSIZE GENMASK(15, 0) + +/* STM32H7_SPI_CFG1 bit fields */ +#define STM32H7_SPI_CFG1_DSIZE_SHIFT 0 +#define STM32H7_SPI_CFG1_DSIZE GENMASK(4, 0) +#define STM32H7_SPI_CFG1_FTHLV_SHIFT 5 +#define STM32H7_SPI_CFG1_FTHLV GENMASK(8, 5) +#define STM32H7_SPI_CFG1_RXDMAEN BIT(14) +#define STM32H7_SPI_CFG1_TXDMAEN BIT(15) +#define STM32H7_SPI_CFG1_MBR_SHIFT 28 +#define STM32H7_SPI_CFG1_MBR GENMASK(30, 28) +#define STM32H7_SPI_CFG1_MBR_MIN 0 +#define STM32H7_SPI_CFG1_MBR_MAX (GENMASK(30, 28) >> 28) + +/* STM32H7_SPI_CFG2 bit fields */ +#define STM32H7_SPI_CFG2_MIDI_SHIFT 4 +#define STM32H7_SPI_CFG2_MIDI GENMASK(7, 4) +#define STM32H7_SPI_CFG2_COMM_SHIFT 17 +#define STM32H7_SPI_CFG2_COMM GENMASK(18, 17) +#define STM32H7_SPI_CFG2_SP_SHIFT 19 +#define STM32H7_SPI_CFG2_SP GENMASK(21, 19) +#define STM32H7_SPI_CFG2_MASTER BIT(22) +#define STM32H7_SPI_CFG2_LSBFRST BIT(23) +#define STM32H7_SPI_CFG2_CPHA BIT(24) +#define STM32H7_SPI_CFG2_CPOL BIT(25) +#define STM32H7_SPI_CFG2_SSM BIT(26) +#define STM32H7_SPI_CFG2_AFCNTR BIT(31) + +/* STM32H7_SPI_IER bit fields */ +#define STM32H7_SPI_IER_RXPIE BIT(0) +#define STM32H7_SPI_IER_TXPIE BIT(1) +#define STM32H7_SPI_IER_DXPIE BIT(2) +#define STM32H7_SPI_IER_EOTIE BIT(3) +#define STM32H7_SPI_IER_TXTFIE BIT(4) +#define STM32H7_SPI_IER_OVRIE BIT(6) +#define STM32H7_SPI_IER_MODFIE BIT(9) +#define STM32H7_SPI_IER_ALL GENMASK(10, 0) + +/* STM32H7_SPI_SR bit fields */ +#define STM32H7_SPI_SR_RXP BIT(0) +#define STM32H7_SPI_SR_TXP BIT(1) +#define STM32H7_SPI_SR_EOT BIT(3) +#define STM32H7_SPI_SR_OVR BIT(6) +#define STM32H7_SPI_SR_MODF BIT(9) +#define STM32H7_SPI_SR_SUSP BIT(11) +#define STM32H7_SPI_SR_RXPLVL_SHIFT 13 +#define STM32H7_SPI_SR_RXPLVL GENMASK(14, 13) +#define STM32H7_SPI_SR_RXWNE BIT(15) + +/* STM32H7_SPI_IFCR bit fields */ +#define STM32H7_SPI_IFCR_ALL GENMASK(11, 3) + +/* STM32H7_SPI_I2SCFGR bit fields */ +#define STM32H7_SPI_I2SCFGR_I2SMOD BIT(0) + +/* STM32H7 SPI Master Baud Rate min/max divisor */ +#define STM32H7_SPI_MBR_DIV_MIN (2 << STM32H7_SPI_CFG1_MBR_MIN) +#define STM32H7_SPI_MBR_DIV_MAX (2 << STM32H7_SPI_CFG1_MBR_MAX) + +/* STM32H7 SPI Communication mode */ +#define STM32H7_SPI_FULL_DUPLEX 0 +#define STM32H7_SPI_SIMPLEX_TX 1 +#define STM32H7_SPI_SIMPLEX_RX 2 +#define STM32H7_SPI_HALF_DUPLEX 3 + +/* SPI Communication type */ #define SPI_FULL_DUPLEX 0 #define SPI_SIMPLEX_TX 1 #define SPI_SIMPLEX_RX 2 -#define SPI_HALF_DUPLEX 3 +#define SPI_3WIRE_TX 3 +#define SPI_3WIRE_RX 4 #define SPI_1HZ_NS 1000000000 +/* + * use PIO for small transfers, avoiding DMA setup/teardown overhead for drivers + * without fifo buffers. + */ +#define SPI_DMA_MIN_BYTES 16 + +/** + * stm32_spi_reg - stm32 SPI register & bitfield desc + * @reg: register offset + * @mask: bitfield mask + * @shift: left shift + */ +struct stm32_spi_reg { + int reg; + int mask; + int shift; +}; + +/** + * stm32_spi_regspec - stm32 registers definition, compatible dependent data + * en: enable register and SPI enable bit + * dma_rx_en: SPI DMA RX enable register end SPI DMA RX enable bit + * dma_tx_en: SPI DMA TX enable register end SPI DMA TX enable bit + * cpol: clock polarity register and polarity bit + * cpha: clock phase register and phase bit + * lsb_first: LSB transmitted first register and bit + * br: baud rate register and bitfields + * rx: SPI RX data register + * tx: SPI TX data register + */ +struct stm32_spi_regspec { + const struct stm32_spi_reg en; + const struct stm32_spi_reg dma_rx_en; + const struct stm32_spi_reg dma_tx_en; + const struct stm32_spi_reg cpol; + const struct stm32_spi_reg cpha; + const struct stm32_spi_reg lsb_first; + const struct stm32_spi_reg br; + const struct stm32_spi_reg rx; + const struct stm32_spi_reg tx; +}; + +struct stm32_spi; + +/** + * stm32_spi_cfg - stm32 compatible configuration data + * @regs: registers descriptions + * @get_fifo_size: routine to get fifo size + * @get_bpw_mask: routine to get bits per word mask + * @disable: routine to disable controller + * @config: routine to configure controller as SPI Master + * @set_bpw: routine to configure registers to for bits per word + * @set_mode: routine to configure registers to desired mode + * @set_data_idleness: optional routine to configure registers to desired idle + * time between frames (if driver has this functionality) + * set_number_of_data: optional routine to configure registers to desired + * number of data (if driver has this functionality) + * @can_dma: routine to determine if the transfer is eligible for DMA use + * @transfer_one_dma_start: routine to start transfer a single spi_transfer + * using DMA + * @dma_rx cb: routine to call after DMA RX channel operation is complete + * @dma_tx cb: routine to call after DMA TX channel operation is complete + * @transfer_one_irq: routine to configure interrupts for driver + * @irq_handler_event: Interrupt handler for SPI controller events + * @irq_handler_thread: thread of interrupt handler for SPI controller + * @baud_rate_div_min: minimum baud rate divisor + * @baud_rate_div_max: maximum baud rate divisor + * @has_fifo: boolean to know if fifo is used for driver + * @has_startbit: boolean to know if start bit is used to start transfer + */ +struct stm32_spi_cfg { + const struct stm32_spi_regspec *regs; + int (*get_fifo_size)(struct stm32_spi *spi); + int (*get_bpw_mask)(struct stm32_spi *spi); + void (*disable)(struct stm32_spi *spi); + int (*config)(struct stm32_spi *spi); + void (*set_bpw)(struct stm32_spi *spi); + int (*set_mode)(struct stm32_spi *spi, unsigned int comm_type); + void (*set_data_idleness)(struct stm32_spi *spi, u32 length); + int (*set_number_of_data)(struct stm32_spi *spi, u32 length); + void (*transfer_one_dma_start)(struct stm32_spi *spi); + void (*dma_rx_cb)(void *data); + void (*dma_tx_cb)(void *data); + int (*transfer_one_irq)(struct stm32_spi *spi); + irqreturn_t (*irq_handler_event)(int irq, void *dev_id); + irqreturn_t (*irq_handler_thread)(int irq, void *dev_id); + unsigned int baud_rate_div_min; + unsigned int baud_rate_div_max; + bool has_fifo; +}; + /** * struct stm32_spi - private data of the SPI controller * @dev: driver model representation of the controller * @master: controller master interface + * @cfg: compatible configuration data * @base: virtual memory area * @clk: hw kernel clock feeding the SPI clock generator * @clk_rate: rate of the hw kernel clock feeding the SPI clock generator @@ -151,6 +290,7 @@ struct stm32_spi { struct device *dev; struct spi_master *master; + const struct stm32_spi_cfg *cfg; void __iomem *base; struct clk *clk; u32 clk_rate; @@ -176,6 +316,40 @@ struct stm32_spi { dma_addr_t phys_addr; }; +static const struct stm32_spi_regspec stm32f4_spi_regspec = { + .en = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_SPE }, + + .dma_rx_en = { STM32F4_SPI_CR2, STM32F4_SPI_CR2_RXDMAEN }, + .dma_tx_en = { STM32F4_SPI_CR2, STM32F4_SPI_CR2_TXDMAEN }, + + .cpol = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_CPOL }, + .cpha = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_CPHA }, + .lsb_first = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_LSBFRST }, + .br = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_BR, STM32F4_SPI_CR1_BR_SHIFT }, + + .rx = { STM32F4_SPI_DR }, + .tx = { STM32F4_SPI_DR }, +}; + +static const struct stm32_spi_regspec stm32h7_spi_regspec = { + /* SPI data transfer is enabled but spi_ker_ck is idle. + * CFG1 and CFG2 registers are write protected when SPE is enabled. + */ + .en = { STM32H7_SPI_CR1, STM32H7_SPI_CR1_SPE }, + + .dma_rx_en = { STM32H7_SPI_CFG1, STM32H7_SPI_CFG1_RXDMAEN }, + .dma_tx_en = { STM32H7_SPI_CFG1, STM32H7_SPI_CFG1_TXDMAEN }, + + .cpol = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_CPOL }, + .cpha = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_CPHA }, + .lsb_first = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_LSBFRST }, + .br = { STM32H7_SPI_CFG1, STM32H7_SPI_CFG1_MBR, + STM32H7_SPI_CFG1_MBR_SHIFT }, + + .rx = { STM32H7_SPI_RXDR }, + .tx = { STM32H7_SPI_TXDR }, +}; + static inline void stm32_spi_set_bits(struct stm32_spi *spi, u32 offset, u32 bits) { @@ -191,22 +365,22 @@ static inline void stm32_spi_clr_bits(struct stm32_spi *spi, } /** - * stm32_spi_get_fifo_size - Return fifo size + * stm32h7_spi_get_fifo_size - Return fifo size * @spi: pointer to the spi controller data structure */ -static int stm32_spi_get_fifo_size(struct stm32_spi *spi) +static int stm32h7_spi_get_fifo_size(struct stm32_spi *spi) { unsigned long flags; u32 count = 0; spin_lock_irqsave(&spi->lock, flags); - stm32_spi_set_bits(spi, STM32_SPI_CR1, SPI_CR1_SPE); + stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_SPE); - while (readl_relaxed(spi->base + STM32_SPI_SR) & SPI_SR_TXP) - writeb_relaxed(++count, spi->base + STM32_SPI_TXDR); + while (readl_relaxed(spi->base + STM32H7_SPI_SR) & STM32H7_SPI_SR_TXP) + writeb_relaxed(++count, spi->base + STM32H7_SPI_TXDR); - stm32_spi_clr_bits(spi, STM32_SPI_CR1, SPI_CR1_SPE); + stm32_spi_clr_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_SPE); spin_unlock_irqrestore(&spi->lock, flags); @@ -216,10 +390,20 @@ static int stm32_spi_get_fifo_size(struct stm32_spi *spi) } /** - * stm32_spi_get_bpw_mask - Return bits per word mask + * stm32f4_spi_get_bpw_mask - Return bits per word mask * @spi: pointer to the spi controller data structure */ -static int stm32_spi_get_bpw_mask(struct stm32_spi *spi) +static int stm32f4_spi_get_bpw_mask(struct stm32_spi *spi) +{ + dev_dbg(spi->dev, "8-bit or 16-bit data frame supported\n"); + return SPI_BPW_MASK(8) | SPI_BPW_MASK(16); +} + +/** + * stm32h7_spi_get_bpw_mask - Return bits per word mask + * @spi: pointer to the spi controller data structure + */ +static int stm32h7_spi_get_bpw_mask(struct stm32_spi *spi) { unsigned long flags; u32 cfg1, max_bpw; @@ -230,10 +414,11 @@ static int stm32_spi_get_bpw_mask(struct stm32_spi *spi) * The most significant bit at DSIZE bit field is reserved when the * maximum data size of periperal instances is limited to 16-bit */ - stm32_spi_set_bits(spi, STM32_SPI_CFG1, SPI_CFG1_DSIZE); + stm32_spi_set_bits(spi, STM32H7_SPI_CFG1, STM32H7_SPI_CFG1_DSIZE); - cfg1 = readl_relaxed(spi->base + STM32_SPI_CFG1); - max_bpw = (cfg1 & SPI_CFG1_DSIZE) >> SPI_CFG1_DSIZE_SHIFT; + cfg1 = readl_relaxed(spi->base + STM32H7_SPI_CFG1); + max_bpw = (cfg1 & STM32H7_SPI_CFG1_DSIZE) >> + STM32H7_SPI_CFG1_DSIZE_SHIFT; max_bpw += 1; spin_unlock_irqrestore(&spi->lock, flags); @@ -244,13 +429,16 @@ static int stm32_spi_get_bpw_mask(struct stm32_spi *spi) } /** - * stm32_spi_prepare_mbr - Determine SPI_CFG1.MBR value + * stm32_spi_prepare_mbr - Determine baud rate divisor value * @spi: pointer to the spi controller data structure * @speed_hz: requested speed + * @min_div: minimum baud rate divisor + * @max_div: maximum baud rate divisor * - * Return SPI_CFG1.MBR value in case of success or -EINVAL + * Return baud rate divisor value in case of success or -EINVAL */ -static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz) +static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz, + u32 min_div, u32 max_div) { u32 div, mbrdiv; @@ -263,8 +451,7 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz) * no need to check it there. * However, we need to ensure the following calculations. */ - if (div < SPI_MBR_DIV_MIN || - div > SPI_MBR_DIV_MAX) + if ((div < min_div) || (div > max_div)) return -EINVAL; /* Determine the first power of 2 greater than or equal to div */ @@ -279,10 +466,10 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz) } /** - * stm32_spi_prepare_fthlv - Determine FIFO threshold level + * stm32h7_spi_prepare_fthlv - Determine FIFO threshold level * @spi: pointer to the spi controller data structure */ -static u32 stm32_spi_prepare_fthlv(struct stm32_spi *spi) +static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi) { u32 fthlv, half_fifo; @@ -306,32 +493,62 @@ static u32 stm32_spi_prepare_fthlv(struct stm32_spi *spi) } /** - * stm32_spi_write_txfifo - Write bytes in Transmit Data Register + * stm32f4_spi_write_tx - Write bytes to Transmit Data Register * @spi: pointer to the spi controller data structure * * Read from tx_buf depends on remaining bytes to avoid to read beyond * tx_buf end. */ -static void stm32_spi_write_txfifo(struct stm32_spi *spi) +static void stm32f4_spi_write_tx(struct stm32_spi *spi) +{ + if ((spi->tx_len > 0) && (readl_relaxed(spi->base + STM32F4_SPI_SR) & + STM32F4_SPI_SR_TXE)) { + u32 offs = spi->cur_xferlen - spi->tx_len; + + if (spi->cur_bpw == 16) { + const u16 *tx_buf16 = (const u16 *)(spi->tx_buf + offs); + + writew_relaxed(*tx_buf16, spi->base + STM32F4_SPI_DR); + spi->tx_len -= sizeof(u16); + } else { + const u8 *tx_buf8 = (const u8 *)(spi->tx_buf + offs); + + writeb_relaxed(*tx_buf8, spi->base + STM32F4_SPI_DR); + spi->tx_len -= sizeof(u8); + } + } + + dev_dbg(spi->dev, "%s: %d bytes left\n", __func__, spi->tx_len); +} + +/** + * stm32h7_spi_write_txfifo - Write bytes in Transmit Data Register + * @spi: pointer to the spi controller data structure + * + * Read from tx_buf depends on remaining bytes to avoid to read beyond + * tx_buf end. + */ +static void stm32h7_spi_write_txfifo(struct stm32_spi *spi) { while ((spi->tx_len > 0) && - (readl_relaxed(spi->base + STM32_SPI_SR) & SPI_SR_TXP)) { + (readl_relaxed(spi->base + STM32H7_SPI_SR) & + STM32H7_SPI_SR_TXP)) { u32 offs = spi->cur_xferlen - spi->tx_len; if (spi->tx_len >= sizeof(u32)) { const u32 *tx_buf32 = (const u32 *)(spi->tx_buf + offs); - writel_relaxed(*tx_buf32, spi->base + STM32_SPI_TXDR); + writel_relaxed(*tx_buf32, spi->base + STM32H7_SPI_TXDR); spi->tx_len -= sizeof(u32); } else if (spi->tx_len >= sizeof(u16)) { const u16 *tx_buf16 = (const u16 *)(spi->tx_buf + offs); - writew_relaxed(*tx_buf16, spi->base + STM32_SPI_TXDR); + writew_relaxed(*tx_buf16, spi->base + STM32H7_SPI_TXDR); spi->tx_len -= sizeof(u16); } else { const u8 *tx_buf8 = (const u8 *)(spi->tx_buf + offs); - writeb_relaxed(*tx_buf8, spi->base + STM32_SPI_TXDR); + writeb_relaxed(*tx_buf8, spi->base + STM32H7_SPI_TXDR); spi->tx_len -= sizeof(u8); } } @@ -340,43 +557,74 @@ static void stm32_spi_write_txfifo(struct stm32_spi *spi) } /** - * stm32_spi_read_rxfifo - Read bytes in Receive Data Register + * stm32f4_spi_read_rx - Read bytes from Receive Data Register + * @spi: pointer to the spi controller data structure + * + * Write in rx_buf depends on remaining bytes to avoid to write beyond + * rx_buf end. + */ +static void stm32f4_spi_read_rx(struct stm32_spi *spi) +{ + if ((spi->rx_len > 0) && (readl_relaxed(spi->base + STM32F4_SPI_SR) & + STM32F4_SPI_SR_RXNE)) { + u32 offs = spi->cur_xferlen - spi->rx_len; + + if (spi->cur_bpw == 16) { + u16 *rx_buf16 = (u16 *)(spi->rx_buf + offs); + + *rx_buf16 = readw_relaxed(spi->base + STM32F4_SPI_DR); + spi->rx_len -= sizeof(u16); + } else { + u8 *rx_buf8 = (u8 *)(spi->rx_buf + offs); + + *rx_buf8 = readb_relaxed(spi->base + STM32F4_SPI_DR); + spi->rx_len -= sizeof(u8); + } + } + + dev_dbg(spi->dev, "%s: %d bytes left\n", __func__, spi->rx_len); +} + +/** + * stm32h7_spi_read_rxfifo - Read bytes in Receive Data Register * @spi: pointer to the spi controller data structure * * Write in rx_buf depends on remaining bytes to avoid to write beyond * rx_buf end. */ -static void stm32_spi_read_rxfifo(struct stm32_spi *spi, bool flush) +static void stm32h7_spi_read_rxfifo(struct stm32_spi *spi, bool flush) { - u32 sr = readl_relaxed(spi->base + STM32_SPI_SR); - u32 rxplvl = (sr & SPI_SR_RXPLVL) >> SPI_SR_RXPLVL_SHIFT; + u32 sr = readl_relaxed(spi->base + STM32H7_SPI_SR); + u32 rxplvl = (sr & STM32H7_SPI_SR_RXPLVL) >> + STM32H7_SPI_SR_RXPLVL_SHIFT; while ((spi->rx_len > 0) && - ((sr & SPI_SR_RXP) || - (flush && ((sr & SPI_SR_RXWNE) || (rxplvl > 0))))) { + ((sr & STM32H7_SPI_SR_RXP) || + (flush && ((sr & STM32H7_SPI_SR_RXWNE) || (rxplvl > 0))))) { u32 offs = spi->cur_xferlen - spi->rx_len; if ((spi->rx_len >= sizeof(u32)) || - (flush && (sr & SPI_SR_RXWNE))) { + (flush && (sr & STM32H7_SPI_SR_RXWNE))) { u32 *rx_buf32 = (u32 *)(spi->rx_buf + offs); - *rx_buf32 = readl_relaxed(spi->base + STM32_SPI_RXDR); + *rx_buf32 = readl_relaxed(spi->base + STM32H7_SPI_RXDR); spi->rx_len -= sizeof(u32); } else if ((spi->rx_len >= sizeof(u16)) || (flush && (rxplvl >= 2 || spi->cur_bpw > 8))) { u16 *rx_buf16 = (u16 *)(spi->rx_buf + offs); - *rx_buf16 = readw_relaxed(spi->base + STM32_SPI_RXDR); + *rx_buf16 = readw_relaxed(spi->base + STM32H7_SPI_RXDR); spi->rx_len -= sizeof(u16); } else { u8 *rx_buf8 = (u8 *)(spi->rx_buf + offs); - *rx_buf8 = readb_relaxed(spi->base + STM32_SPI_RXDR); + *rx_buf8 = readb_relaxed(spi->base + STM32H7_SPI_RXDR); spi->rx_len -= sizeof(u8); } - sr = readl_relaxed(spi->base + STM32_SPI_SR); - rxplvl = (sr & SPI_SR_RXPLVL) >> SPI_SR_RXPLVL_SHIFT; + sr = readl_relaxed(spi->base + STM32H7_SPI_SR); + rxplvl = (sr & STM32H7_SPI_SR_RXPLVL) >> + STM32H7_SPI_SR_RXPLVL_SHIFT; } dev_dbg(spi->dev, "%s%s: %d bytes left\n", __func__, @@ -386,26 +634,76 @@ static void stm32_spi_read_rxfifo(struct stm32_spi *spi, bool flush) /** * stm32_spi_enable - Enable SPI controller * @spi: pointer to the spi controller data structure - * - * SPI data transfer is enabled but spi_ker_ck is idle. - * SPI_CFG1 and SPI_CFG2 are now write protected. */ static void stm32_spi_enable(struct stm32_spi *spi) { dev_dbg(spi->dev, "enable controller\n"); - stm32_spi_set_bits(spi, STM32_SPI_CR1, SPI_CR1_SPE); + stm32_spi_set_bits(spi, spi->cfg->regs->en.reg, + spi->cfg->regs->en.mask); } /** - * stm32_spi_disable - Disable SPI controller + * stm32f4_spi_disable - Disable SPI controller + * @spi: pointer to the spi controller data structure + */ +static void stm32f4_spi_disable(struct stm32_spi *spi) +{ + unsigned long flags; + u32 sr; + + dev_dbg(spi->dev, "disable controller\n"); + + spin_lock_irqsave(&spi->lock, flags); + + if (!(readl_relaxed(spi->base + STM32F4_SPI_CR1) & + STM32F4_SPI_CR1_SPE)) { + spin_unlock_irqrestore(&spi->lock, flags); + return; + } + + /* Disable interrupts */ + stm32_spi_clr_bits(spi, STM32F4_SPI_CR2, STM32F4_SPI_CR2_TXEIE | + STM32F4_SPI_CR2_RXNEIE | + STM32F4_SPI_CR2_ERRIE); + + /* Wait until BSY = 0 */ + if (readl_relaxed_poll_timeout_atomic(spi->base + STM32F4_SPI_SR, + sr, !(sr & STM32F4_SPI_SR_BSY), + 10, 100000) < 0) { + dev_warn(spi->dev, "disabling condition timeout\n"); + } + + if (spi->cur_usedma && spi->dma_tx) + dmaengine_terminate_all(spi->dma_tx); + if (spi->cur_usedma && spi->dma_rx) + dmaengine_terminate_all(spi->dma_rx); + + stm32_spi_clr_bits(spi, STM32F4_SPI_CR1, STM32F4_SPI_CR1_SPE); + + stm32_spi_clr_bits(spi, STM32F4_SPI_CR2, STM32F4_SPI_CR2_TXDMAEN | + STM32F4_SPI_CR2_RXDMAEN); + + /* Sequence to clear OVR flag */ + readl_relaxed(spi->base + STM32F4_SPI_DR); + readl_relaxed(spi->base + STM32F4_SPI_SR); + + spin_unlock_irqrestore(&spi->lock, flags); +} + +/** + * stm32h7_spi_disable - Disable SPI controller * @spi: pointer to the spi controller data structure * * RX-Fifo is flushed when SPI controller is disabled. To prevent any data - * loss, use stm32_spi_read_rxfifo(flush) to read the remaining bytes in + * loss, use stm32h7_spi_read_rxfifo(flush) to read the remaining bytes in * RX-Fifo. + * Normally, if TSIZE has been configured, we should relax the hardware at the + * reception of the EOT interrupt. But in case of error, EOT will not be + * raised. So the subsystem unprepare_message call allows us to properly + * complete the transfer from an hardware point of view. */ -static void stm32_spi_disable(struct stm32_spi *spi) +static void stm32h7_spi_disable(struct stm32_spi *spi) { unsigned long flags; u32 cr1, sr; @@ -414,23 +712,23 @@ static void stm32_spi_disable(struct stm32_spi *spi) spin_lock_irqsave(&spi->lock, flags); - cr1 = readl_relaxed(spi->base + STM32_SPI_CR1); + cr1 = readl_relaxed(spi->base + STM32H7_SPI_CR1); - if (!(cr1 & SPI_CR1_SPE)) { + if (!(cr1 & STM32H7_SPI_CR1_SPE)) { spin_unlock_irqrestore(&spi->lock, flags); return; } /* Wait on EOT or suspend the flow */ - if (readl_relaxed_poll_timeout_atomic(spi->base + STM32_SPI_SR, - sr, !(sr & SPI_SR_EOT), + if (readl_relaxed_poll_timeout_atomic(spi->base + STM32H7_SPI_SR, + sr, !(sr & STM32H7_SPI_SR_EOT), 10, 100000) < 0) { - if (cr1 & SPI_CR1_CSTART) { - writel_relaxed(cr1 | SPI_CR1_CSUSP, - spi->base + STM32_SPI_CR1); + if (cr1 & STM32H7_SPI_CR1_CSTART) { + writel_relaxed(cr1 | STM32H7_SPI_CR1_CSUSP, + spi->base + STM32H7_SPI_CR1); if (readl_relaxed_poll_timeout_atomic( - spi->base + STM32_SPI_SR, - sr, !(sr & SPI_SR_SUSP), + spi->base + STM32H7_SPI_SR, + sr, !(sr & STM32H7_SPI_SR_SUSP), 10, 100000) < 0) dev_warn(spi->dev, "Suspend request timeout\n"); @@ -438,21 +736,21 @@ static void stm32_spi_disable(struct stm32_spi *spi) } if (!spi->cur_usedma && spi->rx_buf && (spi->rx_len > 0)) - stm32_spi_read_rxfifo(spi, true); + stm32h7_spi_read_rxfifo(spi, true); - if (spi->cur_usedma && spi->tx_buf) + if (spi->cur_usedma && spi->dma_tx) dmaengine_terminate_all(spi->dma_tx); - if (spi->cur_usedma && spi->rx_buf) + if (spi->cur_usedma && spi->dma_rx) dmaengine_terminate_all(spi->dma_rx); - stm32_spi_clr_bits(spi, STM32_SPI_CR1, SPI_CR1_SPE); + stm32_spi_clr_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_SPE); - stm32_spi_clr_bits(spi, STM32_SPI_CFG1, SPI_CFG1_TXDMAEN | - SPI_CFG1_RXDMAEN); + stm32_spi_clr_bits(spi, STM32H7_SPI_CFG1, STM32H7_SPI_CFG1_TXDMAEN | + STM32H7_SPI_CFG1_RXDMAEN); /* Disable interrupts and clear status flags */ - writel_relaxed(0, spi->base + STM32_SPI_IER); - writel_relaxed(SPI_IFCR_ALL, spi->base + STM32_SPI_IFCR); + writel_relaxed(0, spi->base + STM32H7_SPI_IER); + writel_relaxed(STM32H7_SPI_IFCR_ALL, spi->base + STM32H7_SPI_IFCR); spin_unlock_irqrestore(&spi->lock, flags); } @@ -460,26 +758,136 @@ static void stm32_spi_disable(struct stm32_spi *spi) /** * stm32_spi_can_dma - Determine if the transfer is eligible for DMA use * - * If the current transfer size is greater than fifo size, use DMA. + * If driver has fifo and the current transfer size is greater than fifo size, + * use DMA. Otherwise use DMA for transfer longer than defined DMA min bytes. */ static bool stm32_spi_can_dma(struct spi_master *master, struct spi_device *spi_dev, struct spi_transfer *transfer) { + unsigned int dma_size; struct stm32_spi *spi = spi_master_get_devdata(master); + if (spi->cfg->has_fifo) + dma_size = spi->fifo_size; + else + dma_size = SPI_DMA_MIN_BYTES; + dev_dbg(spi->dev, "%s: %s\n", __func__, - (transfer->len > spi->fifo_size) ? "true" : "false"); + (transfer->len > dma_size) ? "true" : "false"); + + return (transfer->len > dma_size); +} + +/** + * stm32f4_spi_irq_event - Interrupt handler for SPI controller events + * @irq: interrupt line + * @dev_id: SPI controller master interface + */ +static irqreturn_t stm32f4_spi_irq_event(int irq, void *dev_id) +{ + struct spi_master *master = dev_id; + struct stm32_spi *spi = spi_master_get_devdata(master); + u32 sr, mask = 0; + unsigned long flags; + bool end = false; + + spin_lock_irqsave(&spi->lock, flags); + + sr = readl_relaxed(spi->base + STM32F4_SPI_SR); + /* + * BSY flag is not handled in interrupt but it is normal behavior when + * this flag is set. + */ + sr &= ~STM32F4_SPI_SR_BSY; + + if (!spi->cur_usedma && (spi->cur_comm == SPI_SIMPLEX_TX || + spi->cur_comm == SPI_3WIRE_TX)) { + /* OVR flag shouldn't be handled for TX only mode */ + sr &= ~STM32F4_SPI_SR_OVR | STM32F4_SPI_SR_RXNE; + mask |= STM32F4_SPI_SR_TXE; + } + + if (!spi->cur_usedma && spi->cur_comm == SPI_FULL_DUPLEX) { + /* TXE flag is set and is handled when RXNE flag occurs */ + sr &= ~STM32F4_SPI_SR_TXE; + mask |= STM32F4_SPI_SR_RXNE | STM32F4_SPI_SR_OVR; + } + + if (!(sr & mask)) { + dev_dbg(spi->dev, "spurious IT (sr=0x%08x)\n", sr); + spin_unlock_irqrestore(&spi->lock, flags); + return IRQ_NONE; + } + + if (sr & STM32F4_SPI_SR_OVR) { + dev_warn(spi->dev, "Overrun: received value discarded\n"); + + /* Sequence to clear OVR flag */ + readl_relaxed(spi->base + STM32F4_SPI_DR); + readl_relaxed(spi->base + STM32F4_SPI_SR); + + /* + * If overrun is detected, it means that something went wrong, + * so stop the current transfer. Transfer can wait for next + * RXNE but DR is already read and end never happens. + */ + end = true; + goto end_irq; + } + + if (sr & STM32F4_SPI_SR_TXE) { + if (spi->tx_buf) + stm32f4_spi_write_tx(spi); + if (spi->tx_len == 0) + end = true; + } + + if (sr & STM32F4_SPI_SR_RXNE) { + stm32f4_spi_read_rx(spi); + if (spi->rx_len == 0) + end = true; + else /* Load data for discontinuous mode */ + stm32f4_spi_write_tx(spi); + } + +end_irq: + if (end) { + /* Immediately disable interrupts to do not generate new one */ + stm32_spi_clr_bits(spi, STM32F4_SPI_CR2, + STM32F4_SPI_CR2_TXEIE | + STM32F4_SPI_CR2_RXNEIE | + STM32F4_SPI_CR2_ERRIE); + spin_unlock_irqrestore(&spi->lock, flags); + return IRQ_WAKE_THREAD; + } + + spin_unlock_irqrestore(&spi->lock, flags); + return IRQ_HANDLED; +} + +/** + * stm32f4_spi_irq_thread - Thread of interrupt handler for SPI controller + * @irq: interrupt line + * @dev_id: SPI controller master interface + */ +static irqreturn_t stm32f4_spi_irq_thread(int irq, void *dev_id) +{ + struct spi_master *master = dev_id; + struct stm32_spi *spi = spi_master_get_devdata(master); + + spi_finalize_current_transfer(master); + stm32f4_spi_disable(spi); - return (transfer->len > spi->fifo_size); + return IRQ_HANDLED; } /** - * stm32_spi_irq - Interrupt handler for SPI controller events + * stm32h7_spi_irq_thread - Thread of interrupt handler for SPI controller * @irq: interrupt line * @dev_id: SPI controller master interface */ -static irqreturn_t stm32_spi_irq(int irq, void *dev_id) +static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id) { struct spi_master *master = dev_id; struct stm32_spi *spi = spi_master_get_devdata(master); @@ -489,19 +897,19 @@ static irqreturn_t stm32_spi_irq(int irq, void *dev_id) spin_lock_irqsave(&spi->lock, flags); - sr = readl_relaxed(spi->base + STM32_SPI_SR); - ier = readl_relaxed(spi->base + STM32_SPI_IER); + sr = readl_relaxed(spi->base + STM32H7_SPI_SR); + ier = readl_relaxed(spi->base + STM32H7_SPI_IER); mask = ier; /* EOTIE is triggered on EOT, SUSP and TXC events. */ - mask |= SPI_SR_SUSP; + mask |= STM32H7_SPI_SR_SUSP; /* * When TXTF is set, DXPIE and TXPIE are cleared. So in case of * Full-Duplex, need to poll RXP event to know if there are remaining * data, before disabling SPI. */ if (spi->rx_buf && !spi->cur_usedma) - mask |= SPI_SR_RXP; + mask |= STM32H7_SPI_SR_RXP; if (!(sr & mask)) { dev_dbg(spi->dev, "spurious IT (sr=0x%08x, ier=0x%08x)\n", @@ -510,10 +918,10 @@ static irqreturn_t stm32_spi_irq(int irq, void *dev_id) return IRQ_NONE; } - if (sr & SPI_SR_SUSP) { + if (sr & STM32H7_SPI_SR_SUSP) { dev_warn(spi->dev, "Communication suspended\n"); if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0))) - stm32_spi_read_rxfifo(spi, false); + stm32h7_spi_read_rxfifo(spi, false); /* * If communication is suspended while using DMA, it means * that something went wrong, so stop the current transfer @@ -522,15 +930,15 @@ static irqreturn_t stm32_spi_irq(int irq, void *dev_id) end = true; } - if (sr & SPI_SR_MODF) { + if (sr & STM32H7_SPI_SR_MODF) { dev_warn(spi->dev, "Mode fault: transfer aborted\n"); end = true; } - if (sr & SPI_SR_OVR) { + if (sr & STM32H7_SPI_SR_OVR) { dev_warn(spi->dev, "Overrun: received value discarded\n"); if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0))) - stm32_spi_read_rxfifo(spi, false); + stm32h7_spi_read_rxfifo(spi, false); /* * If overrun is detected while using DMA, it means that * something went wrong, so stop the current transfer @@ -539,27 +947,27 @@ static irqreturn_t stm32_spi_irq(int irq, void *dev_id) end = true; } - if (sr & SPI_SR_EOT) { + if (sr & STM32H7_SPI_SR_EOT) { if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0))) - stm32_spi_read_rxfifo(spi, true); + stm32h7_spi_read_rxfifo(spi, true); end = true; } - if (sr & SPI_SR_TXP) + if (sr & STM32H7_SPI_SR_TXP) if (!spi->cur_usedma && (spi->tx_buf && (spi->tx_len > 0))) - stm32_spi_write_txfifo(spi); + stm32h7_spi_write_txfifo(spi); - if (sr & SPI_SR_RXP) + if (sr & STM32H7_SPI_SR_RXP) if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0))) - stm32_spi_read_rxfifo(spi, false); + stm32h7_spi_read_rxfifo(spi, false); - writel_relaxed(mask, spi->base + STM32_SPI_IFCR); + writel_relaxed(mask, spi->base + STM32H7_SPI_IFCR); spin_unlock_irqrestore(&spi->lock, flags); if (end) { spi_finalize_current_transfer(master); - stm32_spi_disable(spi); + stm32h7_spi_disable(spi); } return IRQ_HANDLED; @@ -598,7 +1006,7 @@ static int stm32_spi_prepare_msg(struct spi_master *master, struct spi_device *spi_dev = msg->spi; struct device_node *np = spi_dev->dev.of_node; unsigned long flags; - u32 cfg2_clrb = 0, cfg2_setb = 0; + u32 clrb = 0, setb = 0; /* SPI slave device may need time between data frames */ spi->cur_midi = 0; @@ -606,19 +1014,19 @@ static int stm32_spi_prepare_msg(struct spi_master *master, dev_dbg(spi->dev, "%dns inter-data idleness\n", spi->cur_midi); if (spi_dev->mode & SPI_CPOL) - cfg2_setb |= SPI_CFG2_CPOL; + setb |= spi->cfg->regs->cpol.mask; else - cfg2_clrb |= SPI_CFG2_CPOL; + clrb |= spi->cfg->regs->cpol.mask; if (spi_dev->mode & SPI_CPHA) - cfg2_setb |= SPI_CFG2_CPHA; + setb |= spi->cfg->regs->cpha.mask; else - cfg2_clrb |= SPI_CFG2_CPHA; + clrb |= spi->cfg->regs->cpha.mask; if (spi_dev->mode & SPI_LSB_FIRST) - cfg2_setb |= SPI_CFG2_LSBFRST; + setb |= spi->cfg->regs->lsb_first.mask; else - cfg2_clrb |= SPI_CFG2_LSBFRST; + clrb |= spi->cfg->regs->lsb_first.mask; dev_dbg(spi->dev, "cpol=%d cpha=%d lsb_first=%d cs_high=%d\n", spi_dev->mode & SPI_CPOL, @@ -628,11 +1036,12 @@ static int stm32_spi_prepare_msg(struct spi_master *master, spin_lock_irqsave(&spi->lock, flags); - if (cfg2_clrb || cfg2_setb) + /* CPOL, CPHA and LSB FIRST bits have common register */ + if (clrb || setb) writel_relaxed( - (readl_relaxed(spi->base + STM32_SPI_CFG2) & - ~cfg2_clrb) | cfg2_setb, - spi->base + STM32_SPI_CFG2); + (readl_relaxed(spi->base + spi->cfg->regs->cpol.reg) & + ~clrb) | setb, + spi->base + spi->cfg->regs->cpol.reg); spin_unlock_irqrestore(&spi->lock, flags); @@ -640,12 +1049,40 @@ static int stm32_spi_prepare_msg(struct spi_master *master, } /** - * stm32_spi_dma_cb - dma callback + * stm32f4_spi_dma_tx_cb - dma callback + * + * DMA callback is called when the transfer is complete for DMA TX channel. + */ +static void stm32f4_spi_dma_tx_cb(void *data) +{ + struct stm32_spi *spi = data; + + if (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX) { + spi_finalize_current_transfer(spi->master); + stm32f4_spi_disable(spi); + } +} + +/** + * stm32f4_spi_dma_rx_cb - dma callback + * + * DMA callback is called when the transfer is complete for DMA RX channel. + */ +static void stm32f4_spi_dma_rx_cb(void *data) +{ + struct stm32_spi *spi = data; + + spi_finalize_current_transfer(spi->master); + stm32f4_spi_disable(spi); +} + +/** + * stm32h7_spi_dma_cb - dma callback * * DMA callback is called when the transfer is complete or when an error * occurs. If the transfer is complete, EOT flag is raised. */ -static void stm32_spi_dma_cb(void *data) +static void stm32h7_spi_dma_cb(void *data) { struct stm32_spi *spi = data; unsigned long flags; @@ -653,11 +1090,11 @@ static void stm32_spi_dma_cb(void *data) spin_lock_irqsave(&spi->lock, flags); - sr = readl_relaxed(spi->base + STM32_SPI_SR); + sr = readl_relaxed(spi->base + STM32H7_SPI_SR); spin_unlock_irqrestore(&spi->lock, flags); - if (!(sr & SPI_SR_EOT)) + if (!(sr & STM32H7_SPI_SR_EOT)) dev_warn(spi->dev, "DMA error (sr=0x%08x)\n", sr); /* Now wait for EOT, or SUSP or OVR in case of error */ @@ -681,23 +1118,27 @@ static void stm32_spi_dma_config(struct stm32_spi *spi, else buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES; - /* Valid for DMA Half or Full Fifo threshold */ - if (spi->cur_fthlv == 2) + if (spi->cfg->has_fifo) { + /* Valid for DMA Half or Full Fifo threshold */ + if (spi->cur_fthlv == 2) + maxburst = 1; + else + maxburst = spi->cur_fthlv; + } else { maxburst = 1; - else - maxburst = spi->cur_fthlv; + } memset(dma_conf, 0, sizeof(struct dma_slave_config)); dma_conf->direction = dir; if (dma_conf->direction == DMA_DEV_TO_MEM) { /* RX */ - dma_conf->src_addr = spi->phys_addr + STM32_SPI_RXDR; + dma_conf->src_addr = spi->phys_addr + spi->cfg->regs->rx.reg; dma_conf->src_addr_width = buswidth; dma_conf->src_maxburst = maxburst; dev_dbg(spi->dev, "Rx DMA config buswidth=%d, maxburst=%d\n", buswidth, maxburst); } else if (dma_conf->direction == DMA_MEM_TO_DEV) { /* TX */ - dma_conf->dst_addr = spi->phys_addr + STM32_SPI_TXDR; + dma_conf->dst_addr = spi->phys_addr + spi->cfg->regs->tx.reg; dma_conf->dst_addr_width = buswidth; dma_conf->dst_maxburst = maxburst; @@ -707,27 +1148,68 @@ static void stm32_spi_dma_config(struct stm32_spi *spi, } /** - * stm32_spi_transfer_one_irq - transfer a single spi_transfer using - * interrupts + * stm32f4_spi_transfer_one_irq - transfer a single spi_transfer using + * interrupts * * It must returns 0 if the transfer is finished or 1 if the transfer is still * in progress. */ -static int stm32_spi_transfer_one_irq(struct stm32_spi *spi) +static int stm32f4_spi_transfer_one_irq(struct stm32_spi *spi) +{ + unsigned long flags; + u32 cr2 = 0; + + /* Enable the interrupts relative to the current communication mode */ + if (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX) { + cr2 |= STM32F4_SPI_CR2_TXEIE; + } else if (spi->cur_comm == SPI_FULL_DUPLEX) { + /* In transmit-only mode, the OVR flag is set in the SR register + * since the received data are never read. Therefore set OVR + * interrupt only when rx buffer is available. + */ + cr2 |= STM32F4_SPI_CR2_RXNEIE | STM32F4_SPI_CR2_ERRIE; + } else { + return -EINVAL; + } + + spin_lock_irqsave(&spi->lock, flags); + + stm32_spi_set_bits(spi, STM32F4_SPI_CR2, cr2); + + stm32_spi_enable(spi); + + /* starting data transfer when buffer is loaded */ + if (spi->tx_buf) + stm32f4_spi_write_tx(spi); + + spin_unlock_irqrestore(&spi->lock, flags); + + return 1; +} + +/** + * stm32h7_spi_transfer_one_irq - transfer a single spi_transfer using + * interrupts + * + * It must returns 0 if the transfer is finished or 1 if the transfer is still + * in progress. + */ +static int stm32h7_spi_transfer_one_irq(struct stm32_spi *spi) { unsigned long flags; u32 ier = 0; /* Enable the interrupts relative to the current communication mode */ if (spi->tx_buf && spi->rx_buf) /* Full Duplex */ - ier |= SPI_IER_DXPIE; + ier |= STM32H7_SPI_IER_DXPIE; else if (spi->tx_buf) /* Half-Duplex TX dir or Simplex TX */ - ier |= SPI_IER_TXPIE; + ier |= STM32H7_SPI_IER_TXPIE; else if (spi->rx_buf) /* Half-Duplex RX dir or Simplex RX */ - ier |= SPI_IER_RXPIE; + ier |= STM32H7_SPI_IER_RXPIE; /* Enable the interrupts relative to the end of transfer */ - ier |= SPI_IER_EOTIE | SPI_IER_TXTFIE | SPI_IER_OVRIE | SPI_IER_MODFIE; + ier |= STM32H7_SPI_IER_EOTIE | STM32H7_SPI_IER_TXTFIE | + STM32H7_SPI_IER_OVRIE | STM32H7_SPI_IER_MODFIE; spin_lock_irqsave(&spi->lock, flags); @@ -735,11 +1217,11 @@ static int stm32_spi_transfer_one_irq(struct stm32_spi *spi) /* Be sure to have data in fifo before starting data transfer */ if (spi->tx_buf) - stm32_spi_write_txfifo(spi); + stm32h7_spi_write_txfifo(spi); - stm32_spi_set_bits(spi, STM32_SPI_CR1, SPI_CR1_CSTART); + stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_CSTART); - writel_relaxed(ier, spi->base + STM32_SPI_IER); + writel_relaxed(ier, spi->base + STM32H7_SPI_IER); spin_unlock_irqrestore(&spi->lock, flags); @@ -747,6 +1229,43 @@ static int stm32_spi_transfer_one_irq(struct stm32_spi *spi) } /** + * stm32f4_spi_transfer_one_dma_start - Set SPI driver registers to start + * transfer using DMA + */ +static void stm32f4_spi_transfer_one_dma_start(struct stm32_spi *spi) +{ + /* In DMA mode end of transfer is handled by DMA TX or RX callback. */ + if (spi->cur_comm == SPI_SIMPLEX_RX || spi->cur_comm == SPI_3WIRE_RX || + spi->cur_comm == SPI_FULL_DUPLEX) { + /* + * In transmit-only mode, the OVR flag is set in the SR register + * since the received data are never read. Therefore set OVR + * interrupt only when rx buffer is available. + */ + stm32_spi_set_bits(spi, STM32F4_SPI_CR2, STM32F4_SPI_CR2_ERRIE); + } + + stm32_spi_enable(spi); +} + +/** + * stm32h7_spi_transfer_one_dma_start - Set SPI driver registers to start + * transfer using DMA + */ +static void stm32h7_spi_transfer_one_dma_start(struct stm32_spi *spi) +{ + /* Enable the interrupts relative to the end of transfer */ + stm32_spi_set_bits(spi, STM32H7_SPI_IER, STM32H7_SPI_IER_EOTIE | + STM32H7_SPI_IER_TXTFIE | + STM32H7_SPI_IER_OVRIE | + STM32H7_SPI_IER_MODFIE); + + stm32_spi_enable(spi); + + stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_CSTART); +} + +/** * stm32_spi_transfer_one_dma - transfer a single spi_transfer using DMA * * It must returns 0 if the transfer is finished or 1 if the transfer is still @@ -758,17 +1277,17 @@ static int stm32_spi_transfer_one_dma(struct stm32_spi *spi, struct dma_slave_config tx_dma_conf, rx_dma_conf; struct dma_async_tx_descriptor *tx_dma_desc, *rx_dma_desc; unsigned long flags; - u32 ier = 0; spin_lock_irqsave(&spi->lock, flags); rx_dma_desc = NULL; - if (spi->rx_buf) { + if (spi->rx_buf && spi->dma_rx) { stm32_spi_dma_config(spi, &rx_dma_conf, DMA_DEV_TO_MEM); dmaengine_slave_config(spi->dma_rx, &rx_dma_conf); /* Enable Rx DMA request */ - stm32_spi_set_bits(spi, STM32_SPI_CFG1, SPI_CFG1_RXDMAEN); + stm32_spi_set_bits(spi, spi->cfg->regs->dma_rx_en.reg, + spi->cfg->regs->dma_rx_en.mask); rx_dma_desc = dmaengine_prep_slave_sg( spi->dma_rx, xfer->rx_sg.sgl, @@ -778,7 +1297,7 @@ static int stm32_spi_transfer_one_dma(struct stm32_spi *spi, } tx_dma_desc = NULL; - if (spi->tx_buf) { + if (spi->tx_buf && spi->dma_tx) { stm32_spi_dma_config(spi, &tx_dma_conf, DMA_MEM_TO_DEV); dmaengine_slave_config(spi->dma_tx, &tx_dma_conf); @@ -789,12 +1308,15 @@ static int stm32_spi_transfer_one_dma(struct stm32_spi *spi, DMA_PREP_INTERRUPT); } - if ((spi->tx_buf && !tx_dma_desc) || - (spi->rx_buf && !rx_dma_desc)) + if ((spi->tx_buf && spi->dma_tx && !tx_dma_desc) || + (spi->rx_buf && spi->dma_rx && !rx_dma_desc)) + goto dma_desc_error; + + if (spi->cur_comm == SPI_FULL_DUPLEX && (!tx_dma_desc || !rx_dma_desc)) goto dma_desc_error; if (rx_dma_desc) { - rx_dma_desc->callback = stm32_spi_dma_cb; + rx_dma_desc->callback = spi->cfg->dma_rx_cb; rx_dma_desc->callback_param = spi; if (dma_submit_error(dmaengine_submit(rx_dma_desc))) { @@ -806,8 +1328,9 @@ static int stm32_spi_transfer_one_dma(struct stm32_spi *spi, } if (tx_dma_desc) { - if (spi->cur_comm == SPI_SIMPLEX_TX) { - tx_dma_desc->callback = stm32_spi_dma_cb; + if (spi->cur_comm == SPI_SIMPLEX_TX || + spi->cur_comm == SPI_3WIRE_TX) { + tx_dma_desc->callback = spi->cfg->dma_tx_cb; tx_dma_desc->callback_param = spi; } @@ -819,130 +1342,278 @@ static int stm32_spi_transfer_one_dma(struct stm32_spi *spi, dma_async_issue_pending(spi->dma_tx); /* Enable Tx DMA request */ - stm32_spi_set_bits(spi, STM32_SPI_CFG1, SPI_CFG1_TXDMAEN); + stm32_spi_set_bits(spi, spi->cfg->regs->dma_tx_en.reg, + spi->cfg->regs->dma_tx_en.mask); } - /* Enable the interrupts relative to the end of transfer */ - ier |= SPI_IER_EOTIE | SPI_IER_TXTFIE | SPI_IER_OVRIE | SPI_IER_MODFIE; - writel_relaxed(ier, spi->base + STM32_SPI_IER); - - stm32_spi_enable(spi); - - stm32_spi_set_bits(spi, STM32_SPI_CR1, SPI_CR1_CSTART); + spi->cfg->transfer_one_dma_start(spi); spin_unlock_irqrestore(&spi->lock, flags); return 1; dma_submit_error: - if (spi->rx_buf) + if (spi->dma_rx) dmaengine_terminate_all(spi->dma_rx); dma_desc_error: - stm32_spi_clr_bits(spi, STM32_SPI_CFG1, SPI_CFG1_RXDMAEN); + stm32_spi_clr_bits(spi, spi->cfg->regs->dma_rx_en.reg, + spi->cfg->regs->dma_rx_en.mask); spin_unlock_irqrestore(&spi->lock, flags); dev_info(spi->dev, "DMA issue: fall back to irq transfer\n"); - return stm32_spi_transfer_one_irq(spi); + spi->cur_usedma = false; + return spi->cfg->transfer_one_irq(spi); } /** - * stm32_spi_transfer_one_setup - common setup to transfer a single - * spi_transfer either using DMA or - * interrupts. + * stm32f4_spi_set_bpw - Configure bits per word + * @spi: pointer to the spi controller data structure */ -static int stm32_spi_transfer_one_setup(struct stm32_spi *spi, - struct spi_device *spi_dev, - struct spi_transfer *transfer) +static void stm32f4_spi_set_bpw(struct stm32_spi *spi) { - unsigned long flags; - u32 cfg1_clrb = 0, cfg1_setb = 0, cfg2_clrb = 0, cfg2_setb = 0; - u32 mode, nb_words; - int ret = 0; - - spin_lock_irqsave(&spi->lock, flags); + if (spi->cur_bpw == 16) + stm32_spi_set_bits(spi, STM32F4_SPI_CR1, STM32F4_SPI_CR1_DFF); + else + stm32_spi_clr_bits(spi, STM32F4_SPI_CR1, STM32F4_SPI_CR1_DFF); +} - if (spi->cur_bpw != transfer->bits_per_word) { - u32 bpw, fthlv; +/** + * stm32h7_spi_set_bpw - configure bits per word + * @spi: pointer to the spi controller data structure + */ +static void stm32h7_spi_set_bpw(struct stm32_spi *spi) +{ + u32 bpw, fthlv; + u32 cfg1_clrb = 0, cfg1_setb = 0; - spi->cur_bpw = transfer->bits_per_word; - bpw = spi->cur_bpw - 1; + bpw = spi->cur_bpw - 1; - cfg1_clrb |= SPI_CFG1_DSIZE; - cfg1_setb |= (bpw << SPI_CFG1_DSIZE_SHIFT) & SPI_CFG1_DSIZE; + cfg1_clrb |= STM32H7_SPI_CFG1_DSIZE; + cfg1_setb |= (bpw << STM32H7_SPI_CFG1_DSIZE_SHIFT) & + STM32H7_SPI_CFG1_DSIZE; - spi->cur_fthlv = stm32_spi_prepare_fthlv(spi); - fthlv = spi->cur_fthlv - 1; + spi->cur_fthlv = stm32h7_spi_prepare_fthlv(spi); + fthlv = spi->cur_fthlv - 1; - cfg1_clrb |= SPI_CFG1_FTHLV; - cfg1_setb |= (fthlv << SPI_CFG1_FTHLV_SHIFT) & SPI_CFG1_FTHLV; - } + cfg1_clrb |= STM32H7_SPI_CFG1_FTHLV; + cfg1_setb |= (fthlv << STM32H7_SPI_CFG1_FTHLV_SHIFT) & + STM32H7_SPI_CFG1_FTHLV; - if (spi->cur_speed != transfer->speed_hz) { - int mbr; + writel_relaxed( + (readl_relaxed(spi->base + STM32H7_SPI_CFG1) & + ~cfg1_clrb) | cfg1_setb, + spi->base + STM32H7_SPI_CFG1); +} - /* Update spi->cur_speed with real clock speed */ - mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz); - if (mbr < 0) { - ret = mbr; - goto out; - } +/** + * stm32_spi_set_mbr - Configure baud rate divisor in master mode + * @spi: pointer to the spi controller data structure + * @mbrdiv: baud rate divisor value + */ +static void stm32_spi_set_mbr(struct stm32_spi *spi, u32 mbrdiv) +{ + u32 clrb = 0, setb = 0; - transfer->speed_hz = spi->cur_speed; + clrb |= spi->cfg->regs->br.mask; + setb |= ((u32)mbrdiv << spi->cfg->regs->br.shift) & + spi->cfg->regs->br.mask; - cfg1_clrb |= SPI_CFG1_MBR; - cfg1_setb |= ((u32)mbr << SPI_CFG1_MBR_SHIFT) & SPI_CFG1_MBR; - } + writel_relaxed((readl_relaxed(spi->base + spi->cfg->regs->br.reg) & + ~clrb) | setb, + spi->base + spi->cfg->regs->br.reg); +} - if (cfg1_clrb || cfg1_setb) - writel_relaxed((readl_relaxed(spi->base + STM32_SPI_CFG1) & - ~cfg1_clrb) | cfg1_setb, - spi->base + STM32_SPI_CFG1); +/** + * stm32_spi_communication_type - return transfer communication type + * @spi_dev: pointer to the spi device + * transfer: pointer to spi transfer + */ +static unsigned int stm32_spi_communication_type(struct spi_device *spi_dev, + struct spi_transfer *transfer) +{ + unsigned int type = SPI_FULL_DUPLEX; - mode = SPI_FULL_DUPLEX; if (spi_dev->mode & SPI_3WIRE) { /* MISO/MOSI signals shared */ /* * SPI_3WIRE and xfer->tx_buf != NULL and xfer->rx_buf != NULL - * is forbidden und unvalidated by SPI subsystem so depending + * is forbidden and unvalidated by SPI subsystem so depending * on the valid buffer, we can determine the direction of the * transfer. */ - mode = SPI_HALF_DUPLEX; if (!transfer->tx_buf) - stm32_spi_clr_bits(spi, STM32_SPI_CR1, SPI_CR1_HDDIR); - else if (!transfer->rx_buf) - stm32_spi_set_bits(spi, STM32_SPI_CR1, SPI_CR1_HDDIR); + type = SPI_3WIRE_RX; + else + type = SPI_3WIRE_TX; } else { if (!transfer->tx_buf) - mode = SPI_SIMPLEX_RX; + type = SPI_SIMPLEX_RX; else if (!transfer->rx_buf) - mode = SPI_SIMPLEX_TX; + type = SPI_SIMPLEX_TX; + } + + return type; +} + +/** + * stm32f4_spi_set_mode - configure communication mode + * @spi: pointer to the spi controller data structure + * @comm_type: type of communication to configure + */ +static int stm32f4_spi_set_mode(struct stm32_spi *spi, unsigned int comm_type) +{ + if (comm_type == SPI_3WIRE_TX || comm_type == SPI_SIMPLEX_TX) { + stm32_spi_set_bits(spi, STM32F4_SPI_CR1, + STM32F4_SPI_CR1_BIDIMODE | + STM32F4_SPI_CR1_BIDIOE); + } else if (comm_type == SPI_FULL_DUPLEX) { + stm32_spi_clr_bits(spi, STM32F4_SPI_CR1, + STM32F4_SPI_CR1_BIDIMODE | + STM32F4_SPI_CR1_BIDIOE); + } else { + return -EINVAL; } - if (spi->cur_comm != mode) { - spi->cur_comm = mode; - cfg2_clrb |= SPI_CFG2_COMM; - cfg2_setb |= (mode << SPI_CFG2_COMM_SHIFT) & SPI_CFG2_COMM; + return 0; +} + +/** + * stm32h7_spi_set_mode - configure communication mode + * @spi: pointer to the spi controller data structure + * @comm_type: type of communication to configure + */ +static int stm32h7_spi_set_mode(struct stm32_spi *spi, unsigned int comm_type) +{ + u32 mode; + u32 cfg2_clrb = 0, cfg2_setb = 0; + + if (comm_type == SPI_3WIRE_RX) { + mode = STM32H7_SPI_HALF_DUPLEX; + stm32_spi_clr_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_HDDIR); + } else if (comm_type == SPI_3WIRE_TX) { + mode = STM32H7_SPI_HALF_DUPLEX; + stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_HDDIR); + } else if (comm_type == SPI_SIMPLEX_RX) { + mode = STM32H7_SPI_SIMPLEX_RX; + } else if (comm_type == SPI_SIMPLEX_TX) { + mode = STM32H7_SPI_SIMPLEX_TX; + } else { + mode = STM32H7_SPI_FULL_DUPLEX; } - cfg2_clrb |= SPI_CFG2_MIDI; - if ((transfer->len > 1) && (spi->cur_midi > 0)) { + cfg2_clrb |= STM32H7_SPI_CFG2_COMM; + cfg2_setb |= (mode << STM32H7_SPI_CFG2_COMM_SHIFT) & + STM32H7_SPI_CFG2_COMM; + + writel_relaxed( + (readl_relaxed(spi->base + STM32H7_SPI_CFG2) & + ~cfg2_clrb) | cfg2_setb, + spi->base + STM32H7_SPI_CFG2); + + return 0; +} + +/** + * stm32h7_spi_data_idleness - configure minimum time delay inserted between two + * consecutive data frames in master mode + * @spi: pointer to the spi controller data structure + * @len: transfer len + */ +static void stm32h7_spi_data_idleness(struct stm32_spi *spi, u32 len) +{ + u32 cfg2_clrb = 0, cfg2_setb = 0; + + cfg2_clrb |= STM32H7_SPI_CFG2_MIDI; + if ((len > 1) && (spi->cur_midi > 0)) { u32 sck_period_ns = DIV_ROUND_UP(SPI_1HZ_NS, spi->cur_speed); u32 midi = min((u32)DIV_ROUND_UP(spi->cur_midi, sck_period_ns), - (u32)SPI_CFG2_MIDI >> SPI_CFG2_MIDI_SHIFT); + (u32)STM32H7_SPI_CFG2_MIDI >> + STM32H7_SPI_CFG2_MIDI_SHIFT); dev_dbg(spi->dev, "period=%dns, midi=%d(=%dns)\n", sck_period_ns, midi, midi * sck_period_ns); + cfg2_setb |= (midi << STM32H7_SPI_CFG2_MIDI_SHIFT) & + STM32H7_SPI_CFG2_MIDI; + } + + writel_relaxed((readl_relaxed(spi->base + STM32H7_SPI_CFG2) & + ~cfg2_clrb) | cfg2_setb, + spi->base + STM32H7_SPI_CFG2); +} + +/** + * stm32h7_spi_number_of_data - configure number of data at current transfer + * @spi: pointer to the spi controller data structure + * @len: transfer length + */ +static int stm32h7_spi_number_of_data(struct stm32_spi *spi, u32 nb_words) +{ + u32 cr2_clrb = 0, cr2_setb = 0; + + if (nb_words <= (STM32H7_SPI_CR2_TSIZE >> + STM32H7_SPI_CR2_TSIZE_SHIFT)) { + cr2_clrb |= STM32H7_SPI_CR2_TSIZE; + cr2_setb = nb_words << STM32H7_SPI_CR2_TSIZE_SHIFT; + writel_relaxed((readl_relaxed(spi->base + STM32H7_SPI_CR2) & + ~cr2_clrb) | cr2_setb, + spi->base + STM32H7_SPI_CR2); + } else { + return -EMSGSIZE; + } + + return 0; +} + +/** + * stm32_spi_transfer_one_setup - common setup to transfer a single + * spi_transfer either using DMA or + * interrupts. + */ +static int stm32_spi_transfer_one_setup(struct stm32_spi *spi, + struct spi_device *spi_dev, + struct spi_transfer *transfer) +{ + unsigned long flags; + unsigned int comm_type; + int nb_words, ret = 0; + + spin_lock_irqsave(&spi->lock, flags); + + if (spi->cur_bpw != transfer->bits_per_word) { + spi->cur_bpw = transfer->bits_per_word; + spi->cfg->set_bpw(spi); + } - cfg2_setb |= (midi << SPI_CFG2_MIDI_SHIFT) & SPI_CFG2_MIDI; + if (spi->cur_speed != transfer->speed_hz) { + int mbr; + + /* Update spi->cur_speed with real clock speed */ + mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz, + spi->cfg->baud_rate_div_min, + spi->cfg->baud_rate_div_max); + if (mbr < 0) { + ret = mbr; + goto out; + } + + transfer->speed_hz = spi->cur_speed; + stm32_spi_set_mbr(spi, mbr); } - if (cfg2_clrb || cfg2_setb) - writel_relaxed((readl_relaxed(spi->base + STM32_SPI_CFG2) & - ~cfg2_clrb) | cfg2_setb, - spi->base + STM32_SPI_CFG2); + comm_type = stm32_spi_communication_type(spi_dev, transfer); + if (spi->cur_comm != comm_type) { + ret = spi->cfg->set_mode(spi, comm_type); + + if (ret < 0) + goto out; + + spi->cur_comm = comm_type; + } + + if (spi->cfg->set_data_idleness) + spi->cfg->set_data_idleness(spi, transfer->len); if (spi->cur_bpw <= 8) nb_words = transfer->len; @@ -950,13 +1621,11 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi, nb_words = DIV_ROUND_UP(transfer->len * 8, 16); else nb_words = DIV_ROUND_UP(transfer->len * 8, 32); - nb_words <<= SPI_CR2_TSIZE_SHIFT; - if (nb_words <= SPI_CR2_TSIZE) { - writel_relaxed(nb_words, spi->base + STM32_SPI_CR2); - } else { - ret = -EMSGSIZE; - goto out; + if (spi->cfg->set_number_of_data) { + ret = spi->cfg->set_number_of_data(spi, nb_words); + if (ret < 0) + goto out; } spi->cur_xferlen = transfer->len; @@ -997,7 +1666,7 @@ static int stm32_spi_transfer_one(struct spi_master *master, spi->rx_len = spi->rx_buf ? transfer->len : 0; spi->cur_usedma = (master->can_dma && - stm32_spi_can_dma(master, spi_dev, transfer)); + master->can_dma(master, spi_dev, transfer)); ret = stm32_spi_transfer_one_setup(spi, spi_dev, transfer); if (ret) { @@ -1008,47 +1677,73 @@ static int stm32_spi_transfer_one(struct spi_master *master, if (spi->cur_usedma) return stm32_spi_transfer_one_dma(spi, transfer); else - return stm32_spi_transfer_one_irq(spi); + return spi->cfg->transfer_one_irq(spi); } /** * stm32_spi_unprepare_msg - relax the hardware - * - * Normally, if TSIZE has been configured, we should relax the hardware at the - * reception of the EOT interrupt. But in case of error, EOT will not be - * raised. So the subsystem unprepare_message call allows us to properly - * complete the transfer from an hardware point of view. */ static int stm32_spi_unprepare_msg(struct spi_master *master, struct spi_message *msg) { struct stm32_spi *spi = spi_master_get_devdata(master); - stm32_spi_disable(spi); + spi->cfg->disable(spi); + + return 0; +} + +/** + * stm32f4_spi_config - Configure SPI controller as SPI master + */ +static int stm32f4_spi_config(struct stm32_spi *spi) +{ + unsigned long flags; + + spin_lock_irqsave(&spi->lock, flags); + + /* Ensure I2SMOD bit is kept cleared */ + stm32_spi_clr_bits(spi, STM32F4_SPI_I2SCFGR, + STM32F4_SPI_I2SCFGR_I2SMOD); + + /* + * - SS input value high + * - transmitter half duplex direction + * - Set the master mode (default Motorola mode) + * - Consider 1 master/n slaves configuration and + * SS input value is determined by the SSI bit + */ + stm32_spi_set_bits(spi, STM32F4_SPI_CR1, STM32F4_SPI_CR1_SSI | + STM32F4_SPI_CR1_BIDIOE | + STM32F4_SPI_CR1_MSTR | + STM32F4_SPI_CR1_SSM); + + spin_unlock_irqrestore(&spi->lock, flags); return 0; } /** - * stm32_spi_config - Configure SPI controller as SPI master + * stm32h7_spi_config - Configure SPI controller as SPI master */ -static int stm32_spi_config(struct stm32_spi *spi) +static int stm32h7_spi_config(struct stm32_spi *spi) { unsigned long flags; spin_lock_irqsave(&spi->lock, flags); /* Ensure I2SMOD bit is kept cleared */ - stm32_spi_clr_bits(spi, STM32_SPI_I2SCFGR, SPI_I2SCFGR_I2SMOD); + stm32_spi_clr_bits(spi, STM32H7_SPI_I2SCFGR, + STM32H7_SPI_I2SCFGR_I2SMOD); /* * - SS input value high * - transmitter half duplex direction * - automatic communication suspend when RX-Fifo is full */ - stm32_spi_set_bits(spi, STM32_SPI_CR1, SPI_CR1_SSI | - SPI_CR1_HDDIR | - SPI_CR1_MASRX); + stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_SSI | + STM32H7_SPI_CR1_HDDIR | + STM32H7_SPI_CR1_MASRX); /* * - Set the master mode (default Motorola mode) @@ -1056,17 +1751,56 @@ static int stm32_spi_config(struct stm32_spi *spi) * SS input value is determined by the SSI bit * - keep control of all associated GPIOs */ - stm32_spi_set_bits(spi, STM32_SPI_CFG2, SPI_CFG2_MASTER | - SPI_CFG2_SSM | - SPI_CFG2_AFCNTR); + stm32_spi_set_bits(spi, STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_MASTER | + STM32H7_SPI_CFG2_SSM | + STM32H7_SPI_CFG2_AFCNTR); spin_unlock_irqrestore(&spi->lock, flags); return 0; } +static const struct stm32_spi_cfg stm32f4_spi_cfg = { + .regs = &stm32f4_spi_regspec, + .get_bpw_mask = stm32f4_spi_get_bpw_mask, + .disable = stm32f4_spi_disable, + .config = stm32f4_spi_config, + .set_bpw = stm32f4_spi_set_bpw, + .set_mode = stm32f4_spi_set_mode, + .transfer_one_dma_start = stm32f4_spi_transfer_one_dma_start, + .dma_tx_cb = stm32f4_spi_dma_tx_cb, + .dma_rx_cb = stm32f4_spi_dma_rx_cb, + .transfer_one_irq = stm32f4_spi_transfer_one_irq, + .irq_handler_event = stm32f4_spi_irq_event, + .irq_handler_thread = stm32f4_spi_irq_thread, + .baud_rate_div_min = STM32F4_SPI_BR_DIV_MIN, + .baud_rate_div_max = STM32F4_SPI_BR_DIV_MAX, + .has_fifo = false, +}; + +static const struct stm32_spi_cfg stm32h7_spi_cfg = { + .regs = &stm32h7_spi_regspec, + .get_fifo_size = stm32h7_spi_get_fifo_size, + .get_bpw_mask = stm32h7_spi_get_bpw_mask, + .disable = stm32h7_spi_disable, + .config = stm32h7_spi_config, + .set_bpw = stm32h7_spi_set_bpw, + .set_mode = stm32h7_spi_set_mode, + .set_data_idleness = stm32h7_spi_data_idleness, + .set_number_of_data = stm32h7_spi_number_of_data, + .transfer_one_dma_start = stm32h7_spi_transfer_one_dma_start, + .dma_rx_cb = stm32h7_spi_dma_cb, + .dma_tx_cb = stm32h7_spi_dma_cb, + .transfer_one_irq = stm32h7_spi_transfer_one_irq, + .irq_handler_thread = stm32h7_spi_irq_thread, + .baud_rate_div_min = STM32H7_SPI_MBR_DIV_MIN, + .baud_rate_div_max = STM32H7_SPI_MBR_DIV_MAX, + .has_fifo = true, +}; + static const struct of_device_id stm32_spi_of_match[] = { - { .compatible = "st,stm32h7-spi", }, + { .compatible = "st,stm32h7-spi", .data = (void *)&stm32h7_spi_cfg }, + { .compatible = "st,stm32f4-spi", .data = (void *)&stm32f4_spi_cfg }, {}, }; MODULE_DEVICE_TABLE(of, stm32_spi_of_match); @@ -1090,12 +1824,17 @@ static int stm32_spi_probe(struct platform_device *pdev) spi->master = master; spin_lock_init(&spi->lock); + spi->cfg = (const struct stm32_spi_cfg *) + of_match_device(pdev->dev.driver->of_match_table, + &pdev->dev)->data; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); spi->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(spi->base)) { ret = PTR_ERR(spi->base); goto err_master_put; } + spi->phys_addr = (dma_addr_t)res->start; spi->irq = platform_get_irq(pdev, 0); @@ -1104,16 +1843,17 @@ static int stm32_spi_probe(struct platform_device *pdev) ret = -ENOENT; goto err_master_put; } - ret = devm_request_threaded_irq(&pdev->dev, spi->irq, NULL, - stm32_spi_irq, IRQF_ONESHOT, - pdev->name, master); + ret = devm_request_threaded_irq(&pdev->dev, spi->irq, + spi->cfg->irq_handler_event, + spi->cfg->irq_handler_thread, + IRQF_ONESHOT, pdev->name, master); if (ret) { dev_err(&pdev->dev, "irq%d request failed: %d\n", spi->irq, ret); goto err_master_put; } - spi->clk = devm_clk_get(&pdev->dev, 0); + spi->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(spi->clk)) { ret = PTR_ERR(spi->clk); dev_err(&pdev->dev, "clk get failed: %d\n", ret); @@ -1139,9 +1879,10 @@ static int stm32_spi_probe(struct platform_device *pdev) reset_control_deassert(spi->rst); } - spi->fifo_size = stm32_spi_get_fifo_size(spi); + if (spi->cfg->has_fifo) + spi->fifo_size = spi->cfg->get_fifo_size(spi); - ret = stm32_spi_config(spi); + ret = spi->cfg->config(spi); if (ret) { dev_err(&pdev->dev, "controller configuration failed: %d\n", ret); @@ -1151,11 +1892,11 @@ static int stm32_spi_probe(struct platform_device *pdev) master->dev.of_node = pdev->dev.of_node; master->auto_runtime_pm = true; master->bus_num = pdev->id; - master->mode_bits = SPI_MODE_3 | SPI_CS_HIGH | SPI_LSB_FIRST | - SPI_3WIRE | SPI_LOOP; - master->bits_per_word_mask = stm32_spi_get_bpw_mask(spi); - master->max_speed_hz = spi->clk_rate / SPI_MBR_DIV_MIN; - master->min_speed_hz = spi->clk_rate / SPI_MBR_DIV_MAX; + master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST | + SPI_3WIRE; + master->bits_per_word_mask = spi->cfg->get_bpw_mask(spi); + master->max_speed_hz = spi->clk_rate / spi->cfg->baud_rate_div_min; + master->min_speed_hz = spi->clk_rate / spi->cfg->baud_rate_div_max; master->setup = stm32_spi_setup; master->prepare_message = stm32_spi_prepare_msg; master->transfer_one = stm32_spi_transfer_one; @@ -1233,7 +1974,7 @@ static int stm32_spi_remove(struct platform_device *pdev) struct spi_master *master = platform_get_drvdata(pdev); struct stm32_spi *spi = spi_master_get_devdata(master); - stm32_spi_disable(spi); + spi->cfg->disable(spi); if (master->dma_tx) dma_release_channel(master->dma_tx); |