aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/spi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/Kconfig11
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/spi-ath79.c11
-rw-r--r--drivers/spi/spi-atmel.c26
-rw-r--r--drivers/spi/spi-au1550.c11
-rw-r--r--drivers/spi/spi-bcm2835.c20
-rw-r--r--drivers/spi/spi-bcm2835aux.c512
-rw-r--r--drivers/spi/spi-bcm53xx.c13
-rw-r--r--drivers/spi/spi-bfin-sport.c5
-rw-r--r--drivers/spi/spi-bfin5xx.c6
-rw-r--r--drivers/spi/spi-bitbang.c152
-rw-r--r--drivers/spi/spi-davinci.c22
-rw-r--r--drivers/spi/spi-imx.c7
-rw-r--r--drivers/spi/spi-meson-spifc.c1
-rw-r--r--drivers/spi/spi-mt65xx.c53
-rw-r--r--drivers/spi/spi-omap2-mcspi.c28
-rw-r--r--drivers/spi/spi-ppc4xx.c4
-rw-r--r--drivers/spi/spi-pxa2xx.c4
-rw-r--r--drivers/spi/spi-s3c24xx.c4
-rw-r--r--drivers/spi/spi-ti-qspi.c3
-rw-r--r--drivers/spi/spi-xilinx.c38
-rw-r--r--drivers/spi/spi-xtensa-xtfpga.c4
-rw-r--r--drivers/spi/spi.c132
-rw-r--r--drivers/spi/spidev.c3
24 files changed, 814 insertions, 257 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 5c1db987beff..cac92245e3ef 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -88,6 +88,17 @@ config SPI_BCM2835
is for the regular SPI controller. Slave mode operation is not also
not supported.
+config SPI_BCM2835AUX
+ tristate "BCM2835 SPI auxiliary controller"
+ depends on ARCH_BCM2835 || COMPILE_TEST
+ depends on GPIOLIB
+ help
+ This selects a driver for the Broadcom BCM2835 SPI aux master.
+
+ The BCM2835 contains two types of SPI master controller; the
+ "universal SPI master", and the regular SPI controller.
+ This driver is for the universal/auxiliary SPI controller.
+
config SPI_BFIN5XX
tristate "SPI controller driver for ADI Blackfin5xx"
depends on BLACKFIN && !BF60x
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 6a7f6f9d0d1c..31fb7fb2a0b6 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o
+obj-$(CONFIG_SPI_BCM2835AUX) += spi-bcm2835aux.o
obj-$(CONFIG_SPI_BCM53XX) += spi-bcm53xx.o
obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o
diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c
index bf1f9b32c597..6165bf21d427 100644
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -240,14 +240,9 @@ static int ath79_spi_probe(struct platform_device *pdev)
sp->bitbang.flags = SPI_CS_HIGH;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (r == NULL) {
- ret = -ENOENT;
- goto err_put_master;
- }
-
- sp->base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
- if (!sp->base) {
- ret = -ENXIO;
+ sp->base = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(sp->base)) {
+ ret = PTR_ERR(sp->base);
goto err_put_master;
}
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index bf9ed380bb1c..aebad36391c9 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -773,7 +773,8 @@ static int atmel_spi_next_xfer_dma_submit(struct spi_master *master,
*plen = len;
- if (atmel_spi_dma_slave_config(as, &slave_config, 8))
+ if (atmel_spi_dma_slave_config(as, &slave_config,
+ xfer->bits_per_word))
goto err_exit;
/* Send both scatterlists */
@@ -871,14 +872,7 @@ static int atmel_spi_set_xfer_speed(struct atmel_spi *as,
* Calculate the lowest divider that satisfies the
* constraint, assuming div32/fdiv/mbz == 0.
*/
- if (xfer->speed_hz)
- scbr = DIV_ROUND_UP(bus_hz, xfer->speed_hz);
- else
- /*
- * This can happend if max_speed is null.
- * In this case, we set the lowest possible speed
- */
- scbr = 0xff;
+ scbr = DIV_ROUND_UP(bus_hz, xfer->speed_hz);
/*
* If the resulting divider doesn't fit into the
@@ -1300,14 +1294,12 @@ static int atmel_spi_one_transfer(struct spi_master *master,
return -EINVAL;
}
- if (xfer->bits_per_word) {
- asd = spi->controller_state;
- bits = (asd->csr >> 4) & 0xf;
- if (bits != xfer->bits_per_word - 8) {
- dev_dbg(&spi->dev,
+ asd = spi->controller_state;
+ bits = (asd->csr >> 4) & 0xf;
+ if (bits != xfer->bits_per_word - 8) {
+ dev_dbg(&spi->dev,
"you can't yet change bits_per_word in transfers\n");
- return -ENOPROTOOPT;
- }
+ return -ENOPROTOOPT;
}
/*
@@ -1720,6 +1712,7 @@ static int atmel_spi_runtime_resume(struct device *dev)
return clk_prepare_enable(as->clk);
}
+#ifdef CONFIG_PM_SLEEP
static int atmel_spi_suspend(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
@@ -1756,6 +1749,7 @@ static int atmel_spi_resume(struct device *dev)
return ret;
}
+#endif
static const struct dev_pm_ops atmel_spi_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(atmel_spi_suspend, atmel_spi_resume)
diff --git a/drivers/spi/spi-au1550.c b/drivers/spi/spi-au1550.c
index f45e085c01a6..afd239d6dec1 100644
--- a/drivers/spi/spi-au1550.c
+++ b/drivers/spi/spi-au1550.c
@@ -233,13 +233,12 @@ static int au1550_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t)
unsigned bpw, hz;
u32 cfg, stat;
- bpw = spi->bits_per_word;
- hz = spi->max_speed_hz;
if (t) {
- if (t->bits_per_word)
- bpw = t->bits_per_word;
- if (t->speed_hz)
- hz = t->speed_hz;
+ bpw = t->bits_per_word;
+ hz = t->speed_hz;
+ } else {
+ bpw = spi->bits_per_word;
+ hz = spi->max_speed_hz;
}
if (!hz)
diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index e7874a6171ec..cf04960cc3e6 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -386,14 +386,14 @@ static bool bcm2835_spi_can_dma(struct spi_master *master,
/* otherwise we only allow transfers within the same page
* to avoid wasting time on dma_mapping when it is not practical
*/
- if (((size_t)tfr->tx_buf & PAGE_MASK) + tfr->len > PAGE_SIZE) {
+ if (((size_t)tfr->tx_buf & (PAGE_SIZE - 1)) + tfr->len > PAGE_SIZE) {
dev_warn_once(&spi->dev,
"Unaligned spi tx-transfer bridging page\n");
return false;
}
- if (((size_t)tfr->rx_buf & PAGE_MASK) + tfr->len > PAGE_SIZE) {
+ if (((size_t)tfr->rx_buf & (PAGE_SIZE - 1)) + tfr->len > PAGE_SIZE) {
dev_warn_once(&spi->dev,
- "Unaligned spi tx-transfer bridging page\n");
+ "Unaligned spi rx-transfer bridging page\n");
return false;
}
@@ -777,7 +777,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
goto out_master_put;
}
- bs->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+ bs->irq = platform_get_irq(pdev, 0);
if (bs->irq <= 0) {
dev_err(&pdev->dev, "could not get IRQ: %d\n", bs->irq);
err = bs->irq ? bs->irq : -ENODEV;
@@ -786,6 +786,12 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
clk_prepare_enable(bs->clk);
+ bcm2835_dma_init(master, &pdev->dev);
+
+ /* initialise the hardware with the default polarities */
+ bcm2835_wr(bs, BCM2835_SPI_CS,
+ BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
+
err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_interrupt, 0,
dev_name(&pdev->dev), master);
if (err) {
@@ -793,12 +799,6 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
goto out_clk_disable;
}
- bcm2835_dma_init(master, &pdev->dev);
-
- /* initialise the hardware with the default polarities */
- bcm2835_wr(bs, BCM2835_SPI_CS,
- BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
-
err = devm_spi_register_master(&pdev->dev, master);
if (err) {
dev_err(&pdev->dev, "could not register SPI master: %d\n", err);
diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c
new file mode 100644
index 000000000000..7de6f8472a81
--- /dev/null
+++ b/drivers/spi/spi-bcm2835aux.c
@@ -0,0 +1,512 @@
+/*
+ * Driver for Broadcom BCM2835 auxiliary SPI Controllers
+ *
+ * the driver does not rely on the native chipselects at all
+ * but only uses the gpio type chipselects
+ *
+ * Based on: spi-bcm2835.c
+ *
+ * Copyright (C) 2015 Martin Sperl
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spinlock.h>
+
+/*
+ * spi register defines
+ *
+ * note there is garbage in the "official" documentation,
+ * so some data is taken from the file:
+ * brcm_usrlib/dag/vmcsx/vcinclude/bcm2708_chip/aux_io.h
+ * inside of:
+ * http://www.broadcom.com/docs/support/videocore/Brcm_Android_ICS_Graphics_Stack.tar.gz
+ */
+
+/* SPI register offsets */
+#define BCM2835_AUX_SPI_CNTL0 0x00
+#define BCM2835_AUX_SPI_CNTL1 0x04
+#define BCM2835_AUX_SPI_STAT 0x08
+#define BCM2835_AUX_SPI_PEEK 0x0C
+#define BCM2835_AUX_SPI_IO 0x20
+#define BCM2835_AUX_SPI_TXHOLD 0x30
+
+/* Bitfields in CNTL0 */
+#define BCM2835_AUX_SPI_CNTL0_SPEED 0xFFF00000
+#define BCM2835_AUX_SPI_CNTL0_SPEED_MAX 0xFFF
+#define BCM2835_AUX_SPI_CNTL0_SPEED_SHIFT 20
+#define BCM2835_AUX_SPI_CNTL0_CS 0x000E0000
+#define BCM2835_AUX_SPI_CNTL0_POSTINPUT 0x00010000
+#define BCM2835_AUX_SPI_CNTL0_VAR_CS 0x00008000
+#define BCM2835_AUX_SPI_CNTL0_VAR_WIDTH 0x00004000
+#define BCM2835_AUX_SPI_CNTL0_DOUTHOLD 0x00003000
+#define BCM2835_AUX_SPI_CNTL0_ENABLE 0x00000800
+#define BCM2835_AUX_SPI_CNTL0_CPHA_IN 0x00000400
+#define BCM2835_AUX_SPI_CNTL0_CLEARFIFO 0x00000200
+#define BCM2835_AUX_SPI_CNTL0_CPHA_OUT 0x00000100
+#define BCM2835_AUX_SPI_CNTL0_CPOL 0x00000080
+#define BCM2835_AUX_SPI_CNTL0_MSBF_OUT 0x00000040
+#define BCM2835_AUX_SPI_CNTL0_SHIFTLEN 0x0000003F
+
+/* Bitfields in CNTL1 */
+#define BCM2835_AUX_SPI_CNTL1_CSHIGH 0x00000700
+#define BCM2835_AUX_SPI_CNTL1_IDLE 0x00000080
+#define BCM2835_AUX_SPI_CNTL1_TXEMPTY 0x00000040
+#define BCM2835_AUX_SPI_CNTL1_MSBF_IN 0x00000002
+#define BCM2835_AUX_SPI_CNTL1_KEEP_IN 0x00000001
+
+/* Bitfields in STAT */
+#define BCM2835_AUX_SPI_STAT_TX_LVL 0xFF000000
+#define BCM2835_AUX_SPI_STAT_RX_LVL 0x00FF0000
+#define BCM2835_AUX_SPI_STAT_TX_FULL 0x00000400
+#define BCM2835_AUX_SPI_STAT_TX_EMPTY 0x00000200
+#define BCM2835_AUX_SPI_STAT_RX_FULL 0x00000100
+#define BCM2835_AUX_SPI_STAT_RX_EMPTY 0x00000080
+#define BCM2835_AUX_SPI_STAT_BUSY 0x00000040
+#define BCM2835_AUX_SPI_STAT_BITCOUNT 0x0000003F
+
+/* timeout values */
+#define BCM2835_AUX_SPI_POLLING_LIMIT_US 30
+#define BCM2835_AUX_SPI_POLLING_JIFFIES 2
+
+#define BCM2835_AUX_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
+ | SPI_NO_CS)
+
+struct bcm2835aux_spi {
+ void __iomem *regs;
+ struct clk *clk;
+ int irq;
+ u32 cntl[2];
+ const u8 *tx_buf;
+ u8 *rx_buf;
+ int tx_len;
+ int rx_len;
+ int pending;
+};
+
+static inline u32 bcm2835aux_rd(struct bcm2835aux_spi *bs, unsigned reg)
+{
+ return readl(bs->regs + reg);
+}
+
+static inline void bcm2835aux_wr(struct bcm2835aux_spi *bs, unsigned reg,
+ u32 val)
+{
+ writel(val, bs->regs + reg);
+}
+
+static inline void bcm2835aux_rd_fifo(struct bcm2835aux_spi *bs)
+{
+ u32 data;
+ int count = min(bs->rx_len, 3);
+
+ data = bcm2835aux_rd(bs, BCM2835_AUX_SPI_IO);
+ if (bs->rx_buf) {
+ switch (count) {
+ case 4:
+ *bs->rx_buf++ = (data >> 24) & 0xff;
+ /* fallthrough */
+ case 3:
+ *bs->rx_buf++ = (data >> 16) & 0xff;
+ /* fallthrough */
+ case 2:
+ *bs->rx_buf++ = (data >> 8) & 0xff;
+ /* fallthrough */
+ case 1:
+ *bs->rx_buf++ = (data >> 0) & 0xff;
+ /* fallthrough - no default */
+ }
+ }
+ bs->rx_len -= count;
+ bs->pending -= count;
+}
+
+static inline void bcm2835aux_wr_fifo(struct bcm2835aux_spi *bs)
+{
+ u32 data;
+ u8 byte;
+ int count;
+ int i;
+
+ /* gather up to 3 bytes to write to the FIFO */
+ count = min(bs->tx_len, 3);
+ data = 0;
+ for (i = 0; i < count; i++) {
+ byte = bs->tx_buf ? *bs->tx_buf++ : 0;
+ data |= byte << (8 * (2 - i));
+ }
+
+ /* and set the variable bit-length */
+ data |= (count * 8) << 24;
+
+ /* and decrement length */
+ bs->tx_len -= count;
+ bs->pending += count;
+
+ /* write to the correct TX-register */
+ if (bs->tx_len)
+ bcm2835aux_wr(bs, BCM2835_AUX_SPI_TXHOLD, data);
+ else
+ bcm2835aux_wr(bs, BCM2835_AUX_SPI_IO, data);
+}
+
+static void bcm2835aux_spi_reset_hw(struct bcm2835aux_spi *bs)
+{
+ /* disable spi clearing fifo and interrupts */
+ bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, 0);
+ bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0,
+ BCM2835_AUX_SPI_CNTL0_CLEARFIFO);
+}
+
+static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id)
+{
+ struct spi_master *master = dev_id;
+ struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+ irqreturn_t ret = IRQ_NONE;
+
+ /* check if we have data to read */
+ while (bs->rx_len &&
+ (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) &
+ BCM2835_AUX_SPI_STAT_RX_EMPTY))) {
+ bcm2835aux_rd_fifo(bs);
+ ret = IRQ_HANDLED;
+ }
+
+ /* check if we have data to write */
+ while (bs->tx_len &&
+ (bs->pending < 12) &&
+ (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) &
+ BCM2835_AUX_SPI_STAT_TX_FULL))) {
+ bcm2835aux_wr_fifo(bs);
+ ret = IRQ_HANDLED;
+ }
+
+ /* and check if we have reached "done" */
+ while (bs->rx_len &&
+ (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) &
+ BCM2835_AUX_SPI_STAT_BUSY))) {
+ bcm2835aux_rd_fifo(bs);
+ ret = IRQ_HANDLED;
+ }
+
+ /* and if rx_len is 0 then wake up completion and disable spi */
+ if (!bs->rx_len) {
+ bcm2835aux_spi_reset_hw(bs);
+ complete(&master->xfer_completion);
+ }
+
+ /* and return */
+ return ret;
+}
+
+static int __bcm2835aux_spi_transfer_one_irq(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *tfr)
+{
+ struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+
+ /* enable interrupts */
+ bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1] |
+ BCM2835_AUX_SPI_CNTL1_TXEMPTY |
+ BCM2835_AUX_SPI_CNTL1_IDLE);
+
+ /* and wait for finish... */
+ return 1;
+}
+
+static int bcm2835aux_spi_transfer_one_irq(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *tfr)
+{
+ struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+
+ /* fill in registers and fifos before enabling interrupts */
+ bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
+ bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0, bs->cntl[0]);
+
+ /* fill in tx fifo with data before enabling interrupts */
+ while ((bs->tx_len) &&
+ (bs->pending < 12) &&
+ (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) &
+ BCM2835_AUX_SPI_STAT_TX_FULL))) {
+ bcm2835aux_wr_fifo(bs);
+ }
+
+ /* now run the interrupt mode */
+ return __bcm2835aux_spi_transfer_one_irq(master, spi, tfr);
+}
+
+static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *tfr)
+{
+ struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+ unsigned long timeout;
+ u32 stat;
+
+ /* configure spi */
+ bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
+ bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0, bs->cntl[0]);
+
+ /* set the timeout */
+ timeout = jiffies + BCM2835_AUX_SPI_POLLING_JIFFIES;
+
+ /* loop until finished the transfer */
+ while (bs->rx_len) {
+ /* read status */
+ stat = bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT);
+
+ /* fill in tx fifo with remaining data */
+ if ((bs->tx_len) && (!(stat & BCM2835_AUX_SPI_STAT_TX_FULL))) {
+ bcm2835aux_wr_fifo(bs);
+ continue;
+ }
+
+ /* read data from fifo for both cases */
+ if (!(stat & BCM2835_AUX_SPI_STAT_RX_EMPTY)) {
+ bcm2835aux_rd_fifo(bs);
+ continue;
+ }
+ if (!(stat & BCM2835_AUX_SPI_STAT_BUSY)) {
+ bcm2835aux_rd_fifo(bs);
+ continue;
+ }
+
+ /* there is still data pending to read check the timeout */
+ if (bs->rx_len && time_after(jiffies, timeout)) {
+ dev_dbg_ratelimited(&spi->dev,
+ "timeout period reached: jiffies: %lu remaining tx/rx: %d/%d - falling back to interrupt mode\n",
+ jiffies - timeout,
+ bs->tx_len, bs->rx_len);
+ /* forward to interrupt handler */
+ return __bcm2835aux_spi_transfer_one_irq(master,
+ spi, tfr);
+ }
+ }
+
+ /* Transfer complete - reset SPI HW */
+ bcm2835aux_spi_reset_hw(bs);
+
+ /* and return without waiting for completion */
+ return 0;
+}
+
+static int bcm2835aux_spi_transfer_one(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *tfr)
+{
+ struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+ unsigned long spi_hz, clk_hz, speed;
+ unsigned long spi_used_hz;
+ unsigned long long xfer_time_us;
+
+ /* calculate the registers to handle
+ *
+ * note that we use the variable data mode, which
+ * is not optimal for longer transfers as we waste registers
+ * resulting (potentially) in more interrupts when transferring
+ * more than 12 bytes
+ */
+ bs->cntl[0] = BCM2835_AUX_SPI_CNTL0_ENABLE |
+ BCM2835_AUX_SPI_CNTL0_VAR_WIDTH |
+ BCM2835_AUX_SPI_CNTL0_MSBF_OUT;
+ bs->cntl[1] = BCM2835_AUX_SPI_CNTL1_MSBF_IN;
+
+ /* set clock */
+ spi_hz = tfr->speed_hz;
+ clk_hz = clk_get_rate(bs->clk);
+
+ if (spi_hz >= clk_hz / 2) {
+ speed = 0;
+ } else if (spi_hz) {
+ speed = DIV_ROUND_UP(clk_hz, 2 * spi_hz) - 1;
+ if (speed > BCM2835_AUX_SPI_CNTL0_SPEED_MAX)
+ speed = BCM2835_AUX_SPI_CNTL0_SPEED_MAX;
+ } else { /* the slowest we can go */
+ speed = BCM2835_AUX_SPI_CNTL0_SPEED_MAX;
+ }
+ bs->cntl[0] |= speed << BCM2835_AUX_SPI_CNTL0_SPEED_SHIFT;
+
+ spi_used_hz = clk_hz / (2 * (speed + 1));
+
+ /* handle all the modes */
+ if (spi->mode & SPI_CPOL)
+ bs->cntl[0] |= BCM2835_AUX_SPI_CNTL0_CPOL;
+ if (spi->mode & SPI_CPHA)
+ bs->cntl[0] |= BCM2835_AUX_SPI_CNTL0_CPHA_OUT |
+ BCM2835_AUX_SPI_CNTL0_CPHA_IN;
+
+ /* set transmit buffers and length */
+ bs->tx_buf = tfr->tx_buf;
+ bs->rx_buf = tfr->rx_buf;
+ bs->tx_len = tfr->len;
+ bs->rx_len = tfr->len;
+ bs->pending = 0;
+
+ /* calculate the estimated time in us the transfer runs
+ * note that there are are 2 idle clocks after each
+ * chunk getting transferred - in our case the chunk size
+ * is 3 bytes, so we approximate this by 9 bits/byte
+ */
+ xfer_time_us = tfr->len * 9 * 1000000;
+ do_div(xfer_time_us, spi_used_hz);
+
+ /* run in polling mode for short transfers */
+ if (xfer_time_us < BCM2835_AUX_SPI_POLLING_LIMIT_US)
+ return bcm2835aux_spi_transfer_one_poll(master, spi, tfr);
+
+ /* run in interrupt mode for all others */
+ return bcm2835aux_spi_transfer_one_irq(master, spi, tfr);
+}
+
+static void bcm2835aux_spi_handle_err(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+
+ bcm2835aux_spi_reset_hw(bs);
+}
+
+static int bcm2835aux_spi_probe(struct platform_device *pdev)
+{
+ struct spi_master *master;
+ struct bcm2835aux_spi *bs;
+ struct resource *res;
+ unsigned long clk_hz;
+ int err;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(*bs));
+ if (!master) {
+ dev_err(&pdev->dev, "spi_alloc_master() failed\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, master);
+ master->mode_bits = BCM2835_AUX_SPI_MODE_BITS;
+ master->bits_per_word_mask = SPI_BPW_MASK(8);
+ master->num_chipselect = -1;
+ master->transfer_one = bcm2835aux_spi_transfer_one;
+ master->handle_err = bcm2835aux_spi_handle_err;
+ master->dev.of_node = pdev->dev.of_node;
+
+ bs = spi_master_get_devdata(master);
+
+ /* the main area */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ bs->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(bs->regs)) {
+ err = PTR_ERR(bs->regs);
+ goto out_master_put;
+ }
+
+ bs->clk = devm_clk_get(&pdev->dev, NULL);
+ if ((!bs->clk) || (IS_ERR(bs->clk))) {
+ err = PTR_ERR(bs->clk);
+ dev_err(&pdev->dev, "could not get clk: %d\n", err);
+ goto out_master_put;
+ }
+
+ bs->irq = platform_get_irq(pdev, 0);
+ if (bs->irq <= 0) {
+ dev_err(&pdev->dev, "could not get IRQ: %d\n", bs->irq);
+ err = bs->irq ? bs->irq : -ENODEV;
+ goto out_master_put;
+ }
+
+ /* this also enables the HW block */
+ err = clk_prepare_enable(bs->clk);
+ if (err) {
+ dev_err(&pdev->dev, "could not prepare clock: %d\n", err);
+ goto out_master_put;
+ }
+
+ /* just checking if the clock returns a sane value */
+ clk_hz = clk_get_rate(bs->clk);
+ if (!clk_hz) {
+ dev_err(&pdev->dev, "clock returns 0 Hz\n");
+ err = -ENODEV;
+ goto out_clk_disable;
+ }
+
+ /* reset SPI-HW block */
+ bcm2835aux_spi_reset_hw(bs);
+
+ err = devm_request_irq(&pdev->dev, bs->irq,
+ bcm2835aux_spi_interrupt,
+ IRQF_SHARED,
+ dev_name(&pdev->dev), master);
+ if (err) {
+ dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
+ goto out_clk_disable;
+ }
+
+ err = devm_spi_register_master(&pdev->dev, master);
+ if (err) {
+ dev_err(&pdev->dev, "could not register SPI master: %d\n", err);
+ goto out_clk_disable;
+ }
+
+ return 0;
+
+out_clk_disable:
+ clk_disable_unprepare(bs->clk);
+out_master_put:
+ spi_master_put(master);
+ return err;
+}
+
+static int bcm2835aux_spi_remove(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+
+ bcm2835aux_spi_reset_hw(bs);
+
+ /* disable the HW block by releasing the clock */
+ clk_disable_unprepare(bs->clk);
+
+ return 0;
+}
+
+static const struct of_device_id bcm2835aux_spi_match[] = {
+ { .compatible = "brcm,bcm2835-aux-spi", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, bcm2835aux_spi_match);
+
+static struct platform_driver bcm2835aux_spi_driver = {
+ .driver = {
+ .name = "spi-bcm2835aux",
+ .of_match_table = bcm2835aux_spi_match,
+ },
+ .probe = bcm2835aux_spi_probe,
+ .remove = bcm2835aux_spi_remove,
+};
+module_platform_driver(bcm2835aux_spi_driver);
+
+MODULE_DESCRIPTION("SPI controller driver for Broadcom BCM2835 aux");
+MODULE_AUTHOR("Martin Sperl <kernel@martin.sperl.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/spi-bcm53xx.c b/drivers/spi/spi-bcm53xx.c
index 1520554978a3..cc3f938f0a6b 100644
--- a/drivers/spi/spi-bcm53xx.c
+++ b/drivers/spi/spi-bcm53xx.c
@@ -247,28 +247,19 @@ static int bcm53xxspi_bcma_probe(struct bcma_device *core)
if (err) {
spi_master_put(master);
bcma_set_drvdata(core, NULL);
- goto out;
+ return err;
}
/* Broadcom SoCs (at least with the CC rev 42) use SPI for flash only */
spi_new_device(master, &bcm53xx_info);
-out:
- return err;
-}
-
-static void bcm53xxspi_bcma_remove(struct bcma_device *core)
-{
- struct bcm53xxspi *b53spi = bcma_get_drvdata(core);
-
- spi_unregister_master(b53spi->master);
+ return 0;
}
static struct bcma_driver bcm53xxspi_bcma_driver = {
.name = KBUILD_MODNAME,
.id_table = bcm53xxspi_bcma_tbl,
.probe = bcm53xxspi_bcma_probe,
- .remove = bcm53xxspi_bcma_remove,
};
/**************************************************
diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c
index a78693189f45..6c967555a56a 100644
--- a/drivers/spi/spi-bfin-sport.c
+++ b/drivers/spi/spi-bfin-sport.c
@@ -352,10 +352,7 @@ bfin_sport_spi_pump_transfers(unsigned long data)
transfer = drv_data->cur_transfer;
chip = drv_data->cur_chip;
- if (transfer->speed_hz)
- transfer_speed = bfin_sport_hz_to_spi_baud(transfer->speed_hz);
- else
- transfer_speed = chip->baud;
+ transfer_speed = bfin_sport_hz_to_spi_baud(transfer->speed_hz);
bfin_write(&drv_data->regs->tclkdiv, transfer_speed);
SSYNC();
diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c
index a3d65b4f4944..1e91325bf39c 100644
--- a/drivers/spi/spi-bfin5xx.c
+++ b/drivers/spi/spi-bfin5xx.c
@@ -661,11 +661,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
message->state = RUNNING_STATE;
dma_config = 0;
- /* Speed setup (surely valid because already checked) */
- if (transfer->speed_hz)
- bfin_write(&drv_data->regs->baud, hz_to_spi_baud(transfer->speed_hz));
- else
- bfin_write(&drv_data->regs->baud, chip->baud);
+ bfin_write(&drv_data->regs->baud, hz_to_spi_baud(transfer->speed_hz));
bfin_write(&drv_data->regs->stat, BIT_STAT_CLR);
bfin_spi_cs_active(drv_data, chip);
diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
index 840a4984d365..3aa9e6e3dac8 100644
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -24,6 +24,8 @@
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
+#define SPI_BITBANG_CS_DELAY 100
+
/*----------------------------------------------------------------------*/
@@ -180,7 +182,6 @@ int spi_bitbang_setup(struct spi_device *spi)
{
struct spi_bitbang_cs *cs = spi->controller_state;
struct spi_bitbang *bitbang;
- unsigned long flags;
bitbang = spi_master_get_devdata(spi->master);
@@ -210,12 +211,12 @@ int spi_bitbang_setup(struct spi_device *spi)
*/
/* deselect chip (low or high) */
- spin_lock_irqsave(&bitbang->lock, flags);
+ mutex_lock(&bitbang->lock);
if (!bitbang->busy) {
bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
ndelay(cs->nsecs);
}
- spin_unlock_irqrestore(&bitbang->lock, flags);
+ mutex_unlock(&bitbang->lock);
return 0;
}
@@ -255,122 +256,39 @@ static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
static int spi_bitbang_prepare_hardware(struct spi_master *spi)
{
struct spi_bitbang *bitbang;
- unsigned long flags;
bitbang = spi_master_get_devdata(spi);
- spin_lock_irqsave(&bitbang->lock, flags);
+ mutex_lock(&bitbang->lock);
bitbang->busy = 1;
- spin_unlock_irqrestore(&bitbang->lock, flags);
+ mutex_unlock(&bitbang->lock);
return 0;
}
static int spi_bitbang_transfer_one(struct spi_master *master,
- struct spi_message *m)
+ struct spi_device *spi,
+ struct spi_transfer *transfer)
{
- struct spi_bitbang *bitbang;
- unsigned nsecs;
- struct spi_transfer *t = NULL;
- unsigned cs_change;
- int status;
- int do_setup = -1;
- struct spi_device *spi = m->spi;
-
- bitbang = spi_master_get_devdata(master);
-
- /* FIXME this is made-up ... the correct value is known to
- * word-at-a-time bitbang code, and presumably chipselect()
- * should enforce these requirements too?
- */
- nsecs = 100;
-
- cs_change = 1;
- status = 0;
-
- list_for_each_entry(t, &m->transfers, transfer_list) {
-
- /* override speed or wordsize? */
- if (t->speed_hz || t->bits_per_word)
- do_setup = 1;
-
- /* init (-1) or override (1) transfer params */
- if (do_setup != 0) {
- if (bitbang->setup_transfer) {
- status = bitbang->setup_transfer(spi, t);
- if (status < 0)
- break;
- }
- if (do_setup == -1)
- do_setup = 0;
- }
-
- /* set up default clock polarity, and activate chip;
- * this implicitly updates clock and spi modes as
- * previously recorded for this device via setup().
- * (and also deselects any other chip that might be
- * selected ...)
- */
- if (cs_change) {
- bitbang->chipselect(spi, BITBANG_CS_ACTIVE);
- ndelay(nsecs);
- }
- cs_change = t->cs_change;
- if (!t->tx_buf && !t->rx_buf && t->len) {
- status = -EINVAL;
- break;
- }
-
- /* transfer data. the lower level code handles any
- * new dma mappings it needs. our caller always gave
- * us dma-safe buffers.
- */
- if (t->len) {
- /* REVISIT dma API still needs a designated
- * DMA_ADDR_INVALID; ~0 might be better.
- */
- if (!m->is_dma_mapped)
- t->rx_dma = t->tx_dma = 0;
- status = bitbang->txrx_bufs(spi, t);
- }
- if (status > 0)
- m->actual_length += status;
- if (status != t->len) {
- /* always report some kind of error */
- if (status >= 0)
- status = -EREMOTEIO;
- break;
- }
- status = 0;
+ struct spi_bitbang *bitbang = spi_master_get_devdata(master);
+ int status = 0;
- /* protocol tweaks before next transfer */
- if (t->delay_usecs)
- udelay(t->delay_usecs);
-
- if (cs_change &&
- !list_is_last(&t->transfer_list, &m->transfers)) {
- /* sometimes a short mid-message deselect of the chip
- * may be needed to terminate a mode or command
- */
- ndelay(nsecs);
- bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
- ndelay(nsecs);
- }
+ if (bitbang->setup_transfer) {
+ status = bitbang->setup_transfer(spi, transfer);
+ if (status < 0)
+ goto out;
}
- m->status = status;
+ if (transfer->len)
+ status = bitbang->txrx_bufs(spi, transfer);
- /* normally deactivate chipselect ... unless no error and
- * cs_change has hinted that the next message will probably
- * be for this chip too.
- */
- if (!(status == 0 && cs_change)) {
- ndelay(nsecs);
- bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
- ndelay(nsecs);
- }
+ if (status == transfer->len)
+ status = 0;
+ else if (status >= 0)
+ status = -EREMOTEIO;
- spi_finalize_current_message(master);
+out:
+ spi_finalize_current_transfer(master);
return status;
}
@@ -378,17 +296,32 @@ static int spi_bitbang_transfer_one(struct spi_master *master,
static int spi_bitbang_unprepare_hardware(struct spi_master *spi)
{
struct spi_bitbang *bitbang;
- unsigned long flags;
bitbang = spi_master_get_devdata(spi);
- spin_lock_irqsave(&bitbang->lock, flags);
+ mutex_lock(&bitbang->lock);
bitbang->busy = 0;
- spin_unlock_irqrestore(&bitbang->lock, flags);
+ mutex_unlock(&bitbang->lock);
return 0;
}
+static void spi_bitbang_set_cs(struct spi_device *spi, bool enable)
+{
+ struct spi_bitbang *bitbang = spi_master_get_devdata(spi->master);
+
+ /* SPI core provides CS high / low, but bitbang driver
+ * expects CS active
+ * spi device driver takes care of handling SPI_CS_HIGH
+ */
+ enable = (!!(spi->mode & SPI_CS_HIGH) == enable);
+
+ ndelay(SPI_BITBANG_CS_DELAY);
+ bitbang->chipselect(spi, enable ? BITBANG_CS_ACTIVE :
+ BITBANG_CS_INACTIVE);
+ ndelay(SPI_BITBANG_CS_DELAY);
+}
+
/*----------------------------------------------------------------------*/
/**
@@ -427,7 +360,7 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
if (!master || !bitbang->chipselect)
return -EINVAL;
- spin_lock_init(&bitbang->lock);
+ mutex_init(&bitbang->lock);
if (!master->mode_bits)
master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags;
@@ -437,7 +370,8 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
master->prepare_transfer_hardware = spi_bitbang_prepare_hardware;
master->unprepare_transfer_hardware = spi_bitbang_unprepare_hardware;
- master->transfer_one_message = spi_bitbang_transfer_one;
+ master->transfer_one = spi_bitbang_transfer_one;
+ master->set_cs = spi_bitbang_set_cs;
if (!bitbang->txrx_bufs) {
bitbang->use_dma = 0;
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index 3cf9faa6cc3f..7d3af3eacf57 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -215,18 +215,10 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
struct davinci_spi_config *spicfg = spi->controller_data;
u8 chip_sel = spi->chip_select;
u16 spidat1 = CS_DEFAULT;
- bool gpio_chipsel = false;
- int gpio;
dspi = spi_master_get_devdata(spi->master);
pdata = &dspi->pdata;
- if (spi->cs_gpio >= 0) {
- /* SPI core parse and update master->cs_gpio */
- gpio_chipsel = true;
- gpio = spi->cs_gpio;
- }
-
/* program delay transfers if tx_delay is non zero */
if (spicfg->wdelay)
spidat1 |= SPIDAT1_WDEL;
@@ -235,11 +227,12 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
* Board specific chip select logic decides the polarity and cs
* line for the controller
*/
- if (gpio_chipsel) {
+ if (spi->cs_gpio >= 0) {
if (value == BITBANG_CS_ACTIVE)
- gpio_set_value(gpio, spi->mode & SPI_CS_HIGH);
+ gpio_set_value(spi->cs_gpio, spi->mode & SPI_CS_HIGH);
else
- gpio_set_value(gpio, !(spi->mode & SPI_CS_HIGH));
+ gpio_set_value(spi->cs_gpio,
+ !(spi->mode & SPI_CS_HIGH));
} else {
if (value == BITBANG_CS_ACTIVE) {
spidat1 |= SPIDAT1_CSHOLD_MASK;
@@ -992,11 +985,12 @@ static int davinci_spi_probe(struct platform_device *pdev)
goto free_master;
}
- dspi->irq = platform_get_irq(pdev, 0);
- if (dspi->irq <= 0) {
+ ret = platform_get_irq(pdev, 0);
+ if (ret == 0)
ret = -EINVAL;
+ if (ret < 0)
goto free_master;
- }
+ dspi->irq = ret;
ret = devm_request_threaded_irq(&pdev->dev, dspi->irq, davinci_spi_irq,
dummy_thread_fn, 0, dev_name(&pdev->dev), dspi);
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index f9deb84e4e55..0e5723ab47f0 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -336,13 +336,20 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
if (config->mode & SPI_CPHA)
cfg |= MX51_ECSPI_CONFIG_SCLKPHA(config->cs);
+ else
+ cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(config->cs);
if (config->mode & SPI_CPOL) {
cfg |= MX51_ECSPI_CONFIG_SCLKPOL(config->cs);
cfg |= MX51_ECSPI_CONFIG_SCLKCTL(config->cs);
+ } else {
+ cfg &= ~MX51_ECSPI_CONFIG_SCLKPOL(config->cs);
+ cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(config->cs);
}
if (config->mode & SPI_CS_HIGH)
cfg |= MX51_ECSPI_CONFIG_SSBPOL(config->cs);
+ else
+ cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(config->cs);
writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG);
diff --git a/drivers/spi/spi-meson-spifc.c b/drivers/spi/spi-meson-spifc.c
index 5468fc70dbf8..2465259f6241 100644
--- a/drivers/spi/spi-meson-spifc.c
+++ b/drivers/spi/spi-meson-spifc.c
@@ -444,6 +444,7 @@ static const struct of_device_id meson_spifc_dt_match[] = {
{ .compatible = "amlogic,meson6-spifc", },
{ },
};
+MODULE_DEVICE_TABLE(of, meson_spifc_dt_match);
static struct platform_driver meson_spifc_driver = {
.probe = meson_spifc_probe,
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 5f6315c47920..ecb6c58238c4 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -85,7 +85,7 @@ struct mtk_spi {
void __iomem *base;
u32 state;
u32 pad_sel;
- struct clk *spi_clk, *parent_clk;
+ struct clk *parent_clk, *sel_clk, *spi_clk;
struct spi_transfer *cur_transfer;
u32 xfer_len;
struct scatterlist *tx_sgl, *rx_sgl;
@@ -173,22 +173,6 @@ static void mtk_spi_config(struct mtk_spi *mdata,
writel(mdata->pad_sel, mdata->base + SPI_PAD_SEL_REG);
}
-static int mtk_spi_prepare_hardware(struct spi_master *master)
-{
- struct spi_transfer *trans;
- struct mtk_spi *mdata = spi_master_get_devdata(master);
- struct spi_message *msg = master->cur_msg;
-
- trans = list_first_entry(&msg->transfers, struct spi_transfer,
- transfer_list);
- if (!trans->cs_change) {
- mdata->state = MTK_SPI_IDLE;
- mtk_spi_reset(mdata);
- }
-
- return 0;
-}
-
static int mtk_spi_prepare_message(struct spi_master *master,
struct spi_message *msg)
{
@@ -228,11 +212,15 @@ static void mtk_spi_set_cs(struct spi_device *spi, bool enable)
struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
reg_val = readl(mdata->base + SPI_CMD_REG);
- if (!enable)
+ if (!enable) {
reg_val |= SPI_CMD_PAUSE_EN;
- else
+ writel(reg_val, mdata->base + SPI_CMD_REG);
+ } else {
reg_val &= ~SPI_CMD_PAUSE_EN;
- writel(reg_val, mdata->base + SPI_CMD_REG);
+ writel(reg_val, mdata->base + SPI_CMD_REG);
+ mdata->state = MTK_SPI_IDLE;
+ mtk_spi_reset(mdata);
+ }
}
static void mtk_spi_prepare_transfer(struct spi_master *master,
@@ -509,7 +497,6 @@ static int mtk_spi_probe(struct platform_device *pdev)
master->mode_bits = SPI_CPOL | SPI_CPHA;
master->set_cs = mtk_spi_set_cs;
- master->prepare_transfer_hardware = mtk_spi_prepare_hardware;
master->prepare_message = mtk_spi_prepare_message;
master->transfer_one = mtk_spi_transfer_one;
master->can_dma = mtk_spi_can_dma;
@@ -576,13 +563,6 @@ static int mtk_spi_probe(struct platform_device *pdev)
goto err_put_master;
}
- mdata->spi_clk = devm_clk_get(&pdev->dev, "spi-clk");
- if (IS_ERR(mdata->spi_clk)) {
- ret = PTR_ERR(mdata->spi_clk);
- dev_err(&pdev->dev, "failed to get spi-clk: %d\n", ret);
- goto err_put_master;
- }
-
mdata->parent_clk = devm_clk_get(&pdev->dev, "parent-clk");
if (IS_ERR(mdata->parent_clk)) {
ret = PTR_ERR(mdata->parent_clk);
@@ -590,13 +570,27 @@ static int mtk_spi_probe(struct platform_device *pdev)
goto err_put_master;
}
+ mdata->sel_clk = devm_clk_get(&pdev->dev, "sel-clk");
+ if (IS_ERR(mdata->sel_clk)) {
+ ret = PTR_ERR(mdata->sel_clk);
+ dev_err(&pdev->dev, "failed to get sel-clk: %d\n", ret);
+ goto err_put_master;
+ }
+
+ mdata->spi_clk = devm_clk_get(&pdev->dev, "spi-clk");
+ if (IS_ERR(mdata->spi_clk)) {
+ ret = PTR_ERR(mdata->spi_clk);
+ dev_err(&pdev->dev, "failed to get spi-clk: %d\n", ret);
+ goto err_put_master;
+ }
+
ret = clk_prepare_enable(mdata->spi_clk);
if (ret < 0) {
dev_err(&pdev->dev, "failed to enable spi_clk (%d)\n", ret);
goto err_put_master;
}
- ret = clk_set_parent(mdata->spi_clk, mdata->parent_clk);
+ ret = clk_set_parent(mdata->sel_clk, mdata->parent_clk);
if (ret < 0) {
dev_err(&pdev->dev, "failed to clk_set_parent (%d)\n", ret);
goto err_disable_clk;
@@ -630,7 +624,6 @@ static int mtk_spi_remove(struct platform_device *pdev)
pm_runtime_disable(&pdev->dev);
mtk_spi_reset(mdata);
- clk_disable_unprepare(mdata->spi_clk);
spi_master_put(master);
return 0;
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 3d09e0b69b73..1f8903d356e5 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -1217,6 +1217,33 @@ out:
return status;
}
+static int omap2_mcspi_prepare_message(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
+ struct omap2_mcspi_regs *ctx = &mcspi->ctx;
+ struct omap2_mcspi_cs *cs;
+
+ /* Only a single channel can have the FORCE bit enabled
+ * in its chconf0 register.
+ * Scan all channels and disable them except the current one.
+ * A FORCE can remain from a last transfer having cs_change enabled
+ */
+ list_for_each_entry(cs, &ctx->cs, node) {
+ if (msg->spi->controller_state == cs)
+ continue;
+
+ if ((cs->chconf0 & OMAP2_MCSPI_CHCONF_FORCE)) {
+ cs->chconf0 &= ~OMAP2_MCSPI_CHCONF_FORCE;
+ writel_relaxed(cs->chconf0,
+ cs->base + OMAP2_MCSPI_CHCONF0);
+ readl_relaxed(cs->base + OMAP2_MCSPI_CHCONF0);
+ }
+ }
+
+ return 0;
+}
+
static int omap2_mcspi_transfer_one(struct spi_master *master,
struct spi_device *spi, struct spi_transfer *t)
{
@@ -1344,6 +1371,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
master->setup = omap2_mcspi_setup;
master->auto_runtime_pm = true;
+ master->prepare_message = omap2_mcspi_prepare_message;
master->transfer_one = omap2_mcspi_transfer_one;
master->set_cs = omap2_mcspi_set_cs;
master->cleanup = omap2_mcspi_cleanup;
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index 54fb984a3e17..dd3d0a218d8b 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -210,12 +210,12 @@ static int spi_ppc4xx_setupxfer(struct spi_device *spi, struct spi_transfer *t)
if (in_8(&hw->regs->cdm) != cdm)
out_8(&hw->regs->cdm, cdm);
- spin_lock(&hw->bitbang.lock);
+ mutex_lock(&hw->bitbang.lock);
if (!hw->bitbang.busy) {
hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE);
/* Need to ndelay here? */
}
- spin_unlock(&hw->bitbang.lock);
+ mutex_unlock(&hw->bitbang.lock);
return 0;
}
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index fdd791977041..a8ef38ebb9c9 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -654,6 +654,10 @@ static irqreturn_t ssp_int(int irq, void *dev_id)
if (!(sccr1_reg & SSCR1_TIE))
mask &= ~SSSR_TFS;
+ /* Ignore RX timeout interrupt if it is disabled */
+ if (!(sccr1_reg & SSCR1_TINTE))
+ mask &= ~SSSR_TINT;
+
if (!(status & mask))
return IRQ_NONE;
diff --git a/drivers/spi/spi-s3c24xx.c b/drivers/spi/spi-s3c24xx.c
index f36bc320a807..4e7d1bfed7e6 100644
--- a/drivers/spi/spi-s3c24xx.c
+++ b/drivers/spi/spi-s3c24xx.c
@@ -198,12 +198,12 @@ static int s3c24xx_spi_setup(struct spi_device *spi)
if (ret)
return ret;
- spin_lock(&hw->bitbang.lock);
+ mutex_lock(&hw->bitbang.lock);
if (!hw->bitbang.busy) {
hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE);
/* need to ndelay for 0.5 clocktick ? */
}
- spin_unlock(&hw->bitbang.lock);
+ mutex_unlock(&hw->bitbang.lock);
return 0;
}
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index aa6d284131e0..81b84858cfee 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -410,11 +410,10 @@ static int ti_qspi_start_transfer_one(struct spi_master *master,
mutex_unlock(&qspi->list_lock);
+ ti_qspi_write(qspi, qspi->cmd | QSPI_INVAL, QSPI_SPI_CMD_REG);
m->status = status;
spi_finalize_current_message(master);
- ti_qspi_write(qspi, qspi->cmd | QSPI_INVAL, QSPI_SPI_CMD_REG);
-
return status;
}
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index a339c1e9997a..3009121173cd 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -270,6 +270,7 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
while (remaining_words) {
int n_words, tx_words, rx_words;
+ u32 sr;
n_words = min(remaining_words, xspi->buffer_size);
@@ -284,24 +285,33 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
if (use_irq) {
xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
wait_for_completion(&xspi->done);
- } else
- while (!(xspi->read_fn(xspi->regs + XSPI_SR_OFFSET) &
- XSPI_SR_TX_EMPTY_MASK))
- ;
-
- /* A transmit has just completed. Process received data and
- * check for more data to transmit. Always inhibit the
- * transmitter while the Isr refills the transmit register/FIFO,
- * or make sure it is stopped if we're done.
- */
- if (use_irq)
+ /* A transmit has just completed. Process received data
+ * and check for more data to transmit. Always inhibit
+ * the transmitter while the Isr refills the transmit
+ * register/FIFO, or make sure it is stopped if we're
+ * done.
+ */
xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT,
- xspi->regs + XSPI_CR_OFFSET);
+ xspi->regs + XSPI_CR_OFFSET);
+ sr = XSPI_SR_TX_EMPTY_MASK;
+ } else
+ sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
/* Read out all the data from the Rx FIFO */
rx_words = n_words;
- while (rx_words--)
- xilinx_spi_rx(xspi);
+ while (rx_words) {
+ if ((sr & XSPI_SR_TX_EMPTY_MASK) && (rx_words > 1)) {
+ xilinx_spi_rx(xspi);
+ rx_words--;
+ continue;
+ }
+
+ sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
+ if (!(sr & XSPI_SR_RX_EMPTY_MASK)) {
+ xilinx_spi_rx(xspi);
+ rx_words--;
+ }
+ }
remaining_words -= n_words;
}
diff --git a/drivers/spi/spi-xtensa-xtfpga.c b/drivers/spi/spi-xtensa-xtfpga.c
index 2e32ea2f194f..be6155cba9de 100644
--- a/drivers/spi/spi-xtensa-xtfpga.c
+++ b/drivers/spi/spi-xtensa-xtfpga.c
@@ -34,13 +34,13 @@ struct xtfpga_spi {
static inline void xtfpga_spi_write32(const struct xtfpga_spi *spi,
unsigned addr, u32 val)
{
- iowrite32(val, spi->regs + addr);
+ __raw_writel(val, spi->regs + addr);
}
static inline unsigned int xtfpga_spi_read32(const struct xtfpga_spi *spi,
unsigned addr)
{
- return ioread32(spi->regs + addr);
+ return __raw_readl(spi->regs + addr);
}
static inline void xtfpga_spi_wait_busy(struct xtfpga_spi *xspi)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 3abb3903f2ad..f9e92f535cbb 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -123,6 +123,28 @@ SPI_STATISTICS_SHOW(bytes, "%llu");
SPI_STATISTICS_SHOW(bytes_rx, "%llu");
SPI_STATISTICS_SHOW(bytes_tx, "%llu");
+#define SPI_STATISTICS_TRANSFER_BYTES_HISTO(index, number) \
+ SPI_STATISTICS_SHOW_NAME(transfer_bytes_histo##index, \
+ "transfer_bytes_histo_" number, \
+ transfer_bytes_histo[index], "%lu")
+SPI_STATISTICS_TRANSFER_BYTES_HISTO(0, "0-1");
+SPI_STATISTICS_TRANSFER_BYTES_HISTO(1, "2-3");
+SPI_STATISTICS_TRANSFER_BYTES_HISTO(2, "4-7");
+SPI_STATISTICS_TRANSFER_BYTES_HISTO(3, "8-15");
+SPI_STATISTICS_TRANSFER_BYTES_HISTO(4, "16-31");
+SPI_STATISTICS_TRANSFER_BYTES_HISTO(5, "32-63");
+SPI_STATISTICS_TRANSFER_BYTES_HISTO(6, "64-127");
+SPI_STATISTICS_TRANSFER_BYTES_HISTO(7, "128-255");
+SPI_STATISTICS_TRANSFER_BYTES_HISTO(8, "256-511");
+SPI_STATISTICS_TRANSFER_BYTES_HISTO(9, "512-1023");
+SPI_STATISTICS_TRANSFER_BYTES_HISTO(10, "1024-2047");
+SPI_STATISTICS_TRANSFER_BYTES_HISTO(11, "2048-4095");
+SPI_STATISTICS_TRANSFER_BYTES_HISTO(12, "4096-8191");
+SPI_STATISTICS_TRANSFER_BYTES_HISTO(13, "8192-16383");
+SPI_STATISTICS_TRANSFER_BYTES_HISTO(14, "16384-32767");
+SPI_STATISTICS_TRANSFER_BYTES_HISTO(15, "32768-65535");
+SPI_STATISTICS_TRANSFER_BYTES_HISTO(16, "65536+");
+
static struct attribute *spi_dev_attrs[] = {
&dev_attr_modalias.attr,
NULL,
@@ -143,6 +165,23 @@ static struct attribute *spi_device_statistics_attrs[] = {
&dev_attr_spi_device_bytes.attr,
&dev_attr_spi_device_bytes_rx.attr,
&dev_attr_spi_device_bytes_tx.attr,
+ &dev_attr_spi_device_transfer_bytes_histo0.attr,
+ &dev_attr_spi_device_transfer_bytes_histo1.attr,
+ &dev_attr_spi_device_transfer_bytes_histo2.attr,
+ &dev_attr_spi_device_transfer_bytes_histo3.attr,
+ &dev_attr_spi_device_transfer_bytes_histo4.attr,
+ &dev_attr_spi_device_transfer_bytes_histo5.attr,
+ &dev_attr_spi_device_transfer_bytes_histo6.attr,
+ &dev_attr_spi_device_transfer_bytes_histo7.attr,
+ &dev_attr_spi_device_transfer_bytes_histo8.attr,
+ &dev_attr_spi_device_transfer_bytes_histo9.attr,
+ &dev_attr_spi_device_transfer_bytes_histo10.attr,
+ &dev_attr_spi_device_transfer_bytes_histo11.attr,
+ &dev_attr_spi_device_transfer_bytes_histo12.attr,
+ &dev_attr_spi_device_transfer_bytes_histo13.attr,
+ &dev_attr_spi_device_transfer_bytes_histo14.attr,
+ &dev_attr_spi_device_transfer_bytes_histo15.attr,
+ &dev_attr_spi_device_transfer_bytes_histo16.attr,
NULL,
};
@@ -168,6 +207,23 @@ static struct attribute *spi_master_statistics_attrs[] = {
&dev_attr_spi_master_bytes.attr,
&dev_attr_spi_master_bytes_rx.attr,
&dev_attr_spi_master_bytes_tx.attr,
+ &dev_attr_spi_master_transfer_bytes_histo0.attr,
+ &dev_attr_spi_master_transfer_bytes_histo1.attr,
+ &dev_attr_spi_master_transfer_bytes_histo2.attr,
+ &dev_attr_spi_master_transfer_bytes_histo3.attr,
+ &dev_attr_spi_master_transfer_bytes_histo4.attr,
+ &dev_attr_spi_master_transfer_bytes_histo5.attr,
+ &dev_attr_spi_master_transfer_bytes_histo6.attr,
+ &dev_attr_spi_master_transfer_bytes_histo7.attr,
+ &dev_attr_spi_master_transfer_bytes_histo8.attr,
+ &dev_attr_spi_master_transfer_bytes_histo9.attr,
+ &dev_attr_spi_master_transfer_bytes_histo10.attr,
+ &dev_attr_spi_master_transfer_bytes_histo11.attr,
+ &dev_attr_spi_master_transfer_bytes_histo12.attr,
+ &dev_attr_spi_master_transfer_bytes_histo13.attr,
+ &dev_attr_spi_master_transfer_bytes_histo14.attr,
+ &dev_attr_spi_master_transfer_bytes_histo15.attr,
+ &dev_attr_spi_master_transfer_bytes_histo16.attr,
NULL,
};
@@ -186,10 +242,15 @@ void spi_statistics_add_transfer_stats(struct spi_statistics *stats,
struct spi_master *master)
{
unsigned long flags;
+ int l2len = min(fls(xfer->len), SPI_STATISTICS_HISTO_SIZE) - 1;
+
+ if (l2len < 0)
+ l2len = 0;
spin_lock_irqsave(&stats->lock, flags);
stats->transfers++;
+ stats->transfer_bytes_histo[l2len]++;
stats->bytes += xfer->len;
if ((xfer->tx_buf) &&
@@ -270,15 +331,24 @@ EXPORT_SYMBOL_GPL(spi_bus_type);
static int spi_drv_probe(struct device *dev)
{
const struct spi_driver *sdrv = to_spi_driver(dev->driver);
+ struct spi_device *spi = to_spi_device(dev);
int ret;
ret = of_clk_set_defaults(dev->of_node, false);
if (ret)
return ret;
+ if (dev->of_node) {
+ spi->irq = of_irq_get(dev->of_node, 0);
+ if (spi->irq == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ if (spi->irq < 0)
+ spi->irq = 0;
+ }
+
ret = dev_pm_domain_attach(dev, true);
if (ret != -EPROBE_DEFER) {
- ret = sdrv->probe(to_spi_device(dev));
+ ret = sdrv->probe(spi);
if (ret)
dev_pm_domain_detach(dev, true);
}
@@ -308,6 +378,8 @@ static void spi_drv_shutdown(struct device *dev)
* spi_register_driver - register a SPI driver
* @sdrv: the driver to register
* Context: can sleep
+ *
+ * Return: zero on success, else a negative error code.
*/
int spi_register_driver(struct spi_driver *sdrv)
{
@@ -359,7 +431,7 @@ static DEFINE_MUTEX(board_lock);
* needs to discard the spi_device without adding it, then it should
* call spi_dev_put() on it.
*
- * Returns a pointer to the new device, or NULL.
+ * Return: a pointer to the new device, or NULL.
*/
struct spi_device *spi_alloc_device(struct spi_master *master)
{
@@ -418,7 +490,7 @@ static int spi_dev_check(struct device *dev, void *data)
* Companion function to spi_alloc_device. Devices allocated with
* spi_alloc_device can be added onto the spi bus with this function.
*
- * Returns 0 on success; negative errno on failure
+ * Return: 0 on success; negative errno on failure
*/
int spi_add_device(struct spi_device *spi)
{
@@ -491,7 +563,7 @@ EXPORT_SYMBOL_GPL(spi_add_device);
* this is exported so that for example a USB or parport based adapter
* driver could add devices (which it would learn about out-of-band).
*
- * Returns the new device, or NULL.
+ * Return: the new device, or NULL.
*/
struct spi_device *spi_new_device(struct spi_master *master,
struct spi_board_info *chip)
@@ -563,6 +635,8 @@ static void spi_match_master_to_boardinfo(struct spi_master *master,
*
* The board info passed can safely be __initdata ... but be careful of
* any embedded pointers (platform_data, etc), they're copied as-is.
+ *
+ * Return: zero on success, else a negative error code.
*/
int spi_register_board_info(struct spi_board_info const *info, unsigned n)
{
@@ -597,7 +671,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable)
if (spi->mode & SPI_CS_HIGH)
enable = !enable;
- if (spi->cs_gpio >= 0)
+ if (gpio_is_valid(spi->cs_gpio))
gpio_set_value(spi->cs_gpio, !enable);
else if (spi->master->set_cs)
spi->master->set_cs(spi, !enable);
@@ -1140,6 +1214,8 @@ static int spi_init_queue(struct spi_master *master)
*
* If there are more messages in the queue, the next message is returned from
* this call.
+ *
+ * Return: the next message in the queue, else NULL if the queue is empty.
*/
struct spi_message *spi_get_next_queued_message(struct spi_master *master)
{
@@ -1303,6 +1379,8 @@ static int __spi_queued_transfer(struct spi_device *spi,
* spi_queued_transfer - transfer function for queued transfers
* @spi: spi device which is requesting transfer
* @msg: spi message which is to handled is queued to driver queue
+ *
+ * Return: zero on success, else a negative error code.
*/
static int spi_queued_transfer(struct spi_device *spi, struct spi_message *msg)
{
@@ -1433,9 +1511,6 @@ of_register_spi_device(struct spi_master *master, struct device_node *nc)
}
spi->max_speed_hz = value;
- /* IRQ */
- spi->irq = irq_of_parse_and_map(nc, 0);
-
/* Store a pointer to the node in the device structure */
of_node_get(nc);
spi->dev.of_node = nc;
@@ -1605,13 +1680,13 @@ static struct class spi_master_class = {
* only ones directly touching chip registers. It's how they allocate
* an spi_master structure, prior to calling spi_register_master().
*
- * This must be called from context that can sleep. It returns the SPI
- * master structure on success, else NULL.
+ * This must be called from context that can sleep.
*
* The caller is responsible for assigning the bus number and initializing
* the master's methods before calling spi_register_master(); and (after errors
- * adding the device) calling spi_master_put() and kfree() to prevent a memory
- * leak.
+ * adding the device) calling spi_master_put() to prevent a memory leak.
+ *
+ * Return: the SPI master structure on success, else NULL.
*/
struct spi_master *spi_alloc_master(struct device *dev, unsigned size)
{
@@ -1695,6 +1770,8 @@ static int of_spi_register_master(struct spi_master *master)
* success, else a negative error code (dropping the master's refcount).
* After a successful return, the caller is responsible for calling
* spi_unregister_master().
+ *
+ * Return: zero on success, else a negative error code.
*/
int spi_register_master(struct spi_master *master)
{
@@ -1788,6 +1865,8 @@ static void devm_spi_unregister(struct device *dev, void *res)
*
* Register a SPI device as with spi_register_master() which will
* automatically be unregister
+ *
+ * Return: zero on success, else a negative error code.
*/
int devm_spi_register_master(struct device *dev, struct spi_master *master)
{
@@ -1893,6 +1972,8 @@ static int __spi_master_match(struct device *dev, const void *data)
* arch init time. It returns a refcounted pointer to the relevant
* spi_master (which the caller must release), or NULL if there is
* no such master registered.
+ *
+ * Return: the SPI master structure on success, else NULL.
*/
struct spi_master *spi_busnum_to_master(u16 bus_num)
{
@@ -1946,11 +2027,13 @@ static int __spi_validate_bits_per_word(struct spi_master *master, u8 bits_per_w
* that the underlying controller or its driver does not support. For
* example, not all hardware supports wire transfers using nine bit words,
* LSB-first wire encoding, or active-high chipselects.
+ *
+ * Return: zero on success, else a negative error code.
*/
int spi_setup(struct spi_device *spi)
{
unsigned bad_bits, ugly_bits;
- int status = 0;
+ int status;
/* check mode to prevent that DUAL and QUAD set at the same time
*/
@@ -1987,17 +2070,18 @@ int spi_setup(struct spi_device *spi)
if (!spi->bits_per_word)
spi->bits_per_word = 8;
- if (__spi_validate_bits_per_word(spi->master, spi->bits_per_word))
- return -EINVAL;
+ status = __spi_validate_bits_per_word(spi->master, spi->bits_per_word);
+ if (status)
+ return status;
if (!spi->max_speed_hz)
spi->max_speed_hz = spi->master->max_speed_hz;
- spi_set_cs(spi, false);
-
if (spi->master->setup)
status = spi->master->setup(spi);
+ spi_set_cs(spi, false);
+
dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s%u bits/w, %u Hz max --> %d\n",
(int) (spi->mode & (SPI_CPOL | SPI_CPHA)),
(spi->mode & SPI_CS_HIGH) ? "cs_high, " : "",
@@ -2163,6 +2247,8 @@ static int __spi_async(struct spi_device *spi, struct spi_message *message)
* no other spi_message queued to that device will be processed.
* (This rule applies equally to all the synchronous transfer calls,
* which are wrappers around this core asynchronous primitive.)
+ *
+ * Return: zero on success, else a negative error code.
*/
int spi_async(struct spi_device *spi, struct spi_message *message)
{
@@ -2215,6 +2301,8 @@ EXPORT_SYMBOL_GPL(spi_async);
* no other spi_message queued to that device will be processed.
* (This rule applies equally to all the synchronous transfer calls,
* which are wrappers around this core asynchronous primitive.)
+ *
+ * Return: zero on success, else a negative error code.
*/
int spi_async_locked(struct spi_device *spi, struct spi_message *message)
{
@@ -2330,7 +2418,7 @@ static int __spi_sync(struct spi_device *spi, struct spi_message *message,
* Also, the caller is guaranteeing that the memory associated with the
* message will not be freed before this call returns.
*
- * It returns zero on success, else a negative error code.
+ * Return: zero on success, else a negative error code.
*/
int spi_sync(struct spi_device *spi, struct spi_message *message)
{
@@ -2352,7 +2440,7 @@ EXPORT_SYMBOL_GPL(spi_sync);
* SPI bus. It has to be preceded by a spi_bus_lock call. The SPI bus must
* be released by a spi_bus_unlock call when the exclusive access is over.
*
- * It returns zero on success, else a negative error code.
+ * Return: zero on success, else a negative error code.
*/
int spi_sync_locked(struct spi_device *spi, struct spi_message *message)
{
@@ -2373,7 +2461,7 @@ EXPORT_SYMBOL_GPL(spi_sync_locked);
* exclusive access is over. Data transfer must be done by spi_sync_locked
* and spi_async_locked calls when the SPI bus lock is held.
*
- * It returns zero on success, else a negative error code.
+ * Return: always zero.
*/
int spi_bus_lock(struct spi_master *master)
{
@@ -2402,7 +2490,7 @@ EXPORT_SYMBOL_GPL(spi_bus_lock);
* This call releases an SPI bus lock previously obtained by an spi_bus_lock
* call.
*
- * It returns zero on success, else a negative error code.
+ * Return: always zero.
*/
int spi_bus_unlock(struct spi_master *master)
{
@@ -2437,6 +2525,8 @@ static u8 *buf;
* portable code should never use this for more than 32 bytes.
* Performance-sensitive or bulk transfer code should instead use
* spi_{async,sync}() calls with dma-safe buffers.
+ *
+ * Return: zero on success, else a negative error code.
*/
int spi_write_then_read(struct spi_device *spi,
const void *txbuf, unsigned n_tx,
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index fba92a526531..ef008e52f953 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -651,7 +651,8 @@ static int spidev_release(struct inode *inode, struct file *filp)
kfree(spidev->rx_buffer);
spidev->rx_buffer = NULL;
- spidev->speed_hz = spidev->spi->max_speed_hz;
+ if (spidev->spi)
+ spidev->speed_hz = spidev->spi->max_speed_hz;
/* ... after we unbound from the underlying device? */
spin_lock_irq(&spidev->spi_lock);
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.