diff options
Diffstat (limited to 'drivers/staging/ath6kl/include/common/targaddrs.h')
| -rw-r--r-- | drivers/staging/ath6kl/include/common/targaddrs.h | 96 |
1 files changed, 48 insertions, 48 deletions
diff --git a/drivers/staging/ath6kl/include/common/targaddrs.h b/drivers/staging/ath6kl/include/common/targaddrs.h index e8cf70354d21..794ae2182a77 100644 --- a/drivers/staging/ath6kl/include/common/targaddrs.h +++ b/drivers/staging/ath6kl/include/common/targaddrs.h @@ -83,13 +83,13 @@ PREPACK struct host_interest_s { * Pointer to application-defined area, if any. * Set by Target application during startup. */ - A_UINT32 hi_app_host_interest; /* 0x00 */ + u32 hi_app_host_interest; /* 0x00 */ /* Pointer to register dump area, valid after Target crash. */ - A_UINT32 hi_failure_state; /* 0x04 */ + u32 hi_failure_state; /* 0x04 */ /* Pointer to debug logging header */ - A_UINT32 hi_dbglog_hdr; /* 0x08 */ + u32 hi_dbglog_hdr; /* 0x08 */ /* Indicates whether or not flash is present on Target. * NB: flash_is_present indicator is here not just @@ -99,36 +99,36 @@ PREPACK struct host_interest_s { * so that it doesn't get reinitialized with the rest * of data. */ - A_UINT32 hi_flash_is_present; /* 0x0c */ + u32 hi_flash_is_present; /* 0x0c */ /* * General-purpose flag bits, similar to AR6000_OPTION_* flags. * Can be used by application rather than by OS. */ - A_UINT32 hi_option_flag; /* 0x10 */ + u32 hi_option_flag; /* 0x10 */ /* * Boolean that determines whether or not to * display messages on the serial port. */ - A_UINT32 hi_serial_enable; /* 0x14 */ + u32 hi_serial_enable; /* 0x14 */ /* Start address of Flash DataSet index, if any */ - A_UINT32 hi_dset_list_head; /* 0x18 */ + u32 hi_dset_list_head; /* 0x18 */ /* Override Target application start address */ - A_UINT32 hi_app_start; /* 0x1c */ + u32 hi_app_start; /* 0x1c */ /* Clock and voltage tuning */ - A_UINT32 hi_skip_clock_init; /* 0x20 */ - A_UINT32 hi_core_clock_setting; /* 0x24 */ - A_UINT32 hi_cpu_clock_setting; /* 0x28 */ - A_UINT32 hi_system_sleep_setting; /* 0x2c */ - A_UINT32 hi_xtal_control_setting; /* 0x30 */ - A_UINT32 hi_pll_ctrl_setting_24ghz; /* 0x34 */ - A_UINT32 hi_pll_ctrl_setting_5ghz; /* 0x38 */ - A_UINT32 hi_ref_voltage_trim_setting; /* 0x3c */ - A_UINT32 hi_clock_info; /* 0x40 */ + u32 hi_skip_clock_init; /* 0x20 */ + u32 hi_core_clock_setting; /* 0x24 */ + u32 hi_cpu_clock_setting; /* 0x28 */ + u32 hi_system_sleep_setting; /* 0x2c */ + u32 hi_xtal_control_setting; /* 0x30 */ + u32 hi_pll_ctrl_setting_24ghz; /* 0x34 */ + u32 hi_pll_ctrl_setting_5ghz; /* 0x38 */ + u32 hi_ref_voltage_trim_setting; /* 0x3c */ + u32 hi_clock_info; /* 0x40 */ /* * Flash configuration overrides, used only @@ -136,49 +136,49 @@ PREPACK struct host_interest_s { * (When using flash, modify the global variables * with equivalent names.) */ - A_UINT32 hi_bank0_addr_value; /* 0x44 */ - A_UINT32 hi_bank0_read_value; /* 0x48 */ - A_UINT32 hi_bank0_write_value; /* 0x4c */ - A_UINT32 hi_bank0_config_value; /* 0x50 */ + u32 hi_bank0_addr_value; /* 0x44 */ + u32 hi_bank0_read_value; /* 0x48 */ + u32 hi_bank0_write_value; /* 0x4c */ + u32 hi_bank0_config_value; /* 0x50 */ /* Pointer to Board Data */ - A_UINT32 hi_board_data; /* 0x54 */ - A_UINT32 hi_board_data_initialized; /* 0x58 */ + u32 hi_board_data; /* 0x54 */ + u32 hi_board_data_initialized; /* 0x58 */ - A_UINT32 hi_dset_RAM_index_table; /* 0x5c */ + u32 hi_dset_RAM_index_table; /* 0x5c */ - A_UINT32 hi_desired_baud_rate; /* 0x60 */ - A_UINT32 hi_dbglog_config; /* 0x64 */ - A_UINT32 hi_end_RAM_reserve_sz; /* 0x68 */ - A_UINT32 hi_mbox_io_block_sz; /* 0x6c */ + u32 hi_desired_baud_rate; /* 0x60 */ + u32 hi_dbglog_config; /* 0x64 */ + u32 hi_end_RAM_reserve_sz; /* 0x68 */ + u32 hi_mbox_io_block_sz; /* 0x6c */ - A_UINT32 hi_num_bpatch_streams; /* 0x70 -- unused */ - A_UINT32 hi_mbox_isr_yield_limit; /* 0x74 */ + u32 hi_num_bpatch_streams; /* 0x70 -- unused */ + u32 hi_mbox_isr_yield_limit; /* 0x74 */ - A_UINT32 hi_refclk_hz; /* 0x78 */ - A_UINT32 hi_ext_clk_detected; /* 0x7c */ - A_UINT32 hi_dbg_uart_txpin; /* 0x80 */ - A_UINT32 hi_dbg_uart_rxpin; /* 0x84 */ - A_UINT32 hi_hci_uart_baud; /* 0x88 */ - A_UINT32 hi_hci_uart_pin_assignments; /* 0x8C */ + u32 hi_refclk_hz; /* 0x78 */ + u32 hi_ext_clk_detected; /* 0x7c */ + u32 hi_dbg_uart_txpin; /* 0x80 */ + u32 hi_dbg_uart_rxpin; /* 0x84 */ + u32 hi_hci_uart_baud; /* 0x88 */ + u32 hi_hci_uart_pin_assignments; /* 0x8C */ /* NOTE: byte [0] = tx pin, [1] = rx pin, [2] = rts pin, [3] = cts pin */ - A_UINT32 hi_hci_uart_baud_scale_val; /* 0x90 */ - A_UINT32 hi_hci_uart_baud_step_val; /* 0x94 */ + u32 hi_hci_uart_baud_scale_val; /* 0x90 */ + u32 hi_hci_uart_baud_step_val; /* 0x94 */ - A_UINT32 hi_allocram_start; /* 0x98 */ - A_UINT32 hi_allocram_sz; /* 0x9c */ - A_UINT32 hi_hci_bridge_flags; /* 0xa0 */ - A_UINT32 hi_hci_uart_support_pins; /* 0xa4 */ + u32 hi_allocram_start; /* 0x98 */ + u32 hi_allocram_sz; /* 0x9c */ + u32 hi_hci_bridge_flags; /* 0xa0 */ + u32 hi_hci_uart_support_pins; /* 0xa4 */ /* NOTE: byte [0] = RESET pin (bit 7 is polarity), bytes[1]..bytes[3] are for future use */ - A_UINT32 hi_hci_uart_pwr_mgmt_params; /* 0xa8 */ + u32 hi_hci_uart_pwr_mgmt_params; /* 0xa8 */ /* 0xa8 - [0]: 1 = enable, 0 = disable * [1]: 0 = UART FC active low, 1 = UART FC active high * 0xa9 - [7:0]: wakeup timeout in ms * 0xaa, 0xab - [15:0]: idle timeout in ms */ /* Pointer to extended board Data */ - A_UINT32 hi_board_ext_data; /* 0xac */ - A_UINT32 hi_board_ext_data_initialized; /* 0xb0 */ + u32 hi_board_ext_data; /* 0xac */ + u32 hi_board_ext_data_initialized; /* 0xb0 */ } POSTPACK; /* Bits defined in hi_option_flag */ @@ -207,10 +207,10 @@ PREPACK struct host_interest_s { * Example: target_addr = AR6002_HOST_INTEREST_ITEM_ADDRESS(hi_board_data); */ #define AR6002_HOST_INTEREST_ITEM_ADDRESS(item) \ - (A_UINT32)((unsigned long)&((((struct host_interest_s *)(AR6002_HOST_INTEREST_ADDRESS))->item))) + (u32)((unsigned long)&((((struct host_interest_s *)(AR6002_HOST_INTEREST_ADDRESS))->item))) #define AR6003_HOST_INTEREST_ITEM_ADDRESS(item) \ - (A_UINT32)((unsigned long)&((((struct host_interest_s *)(AR6003_HOST_INTEREST_ADDRESS))->item))) + (u32)((unsigned long)&((((struct host_interest_s *)(AR6003_HOST_INTEREST_ADDRESS))->item))) #define HOST_INTEREST_DBGLOG_IS_ENABLED() \ (!(HOST_INTEREST->hi_option_flag & HI_OPTION_DISABLE_DBGLOG)) @@ -233,7 +233,7 @@ PREPACK struct host_interest_s { #define AR6003_BOARD_EXT_DATA_ADDRESS 0x57E600 -/* # of A_UINT32 entries in targregs, used by DIAG_FETCH_TARG_REGS */ +/* # of u32 entries in targregs, used by DIAG_FETCH_TARG_REGS */ #define AR6003_FETCH_TARG_REGS_COUNT 64 #endif /* !__ASSEMBLER__ */ |