diff options
Diffstat (limited to 'drivers/staging/bcm/Debug.h')
| -rw-r--r-- | drivers/staging/bcm/Debug.h | 242 |
1 files changed, 0 insertions, 242 deletions
diff --git a/drivers/staging/bcm/Debug.h b/drivers/staging/bcm/Debug.h deleted file mode 100644 index 7b331215c1ac..000000000000 --- a/drivers/staging/bcm/Debug.h +++ /dev/null @@ -1,242 +0,0 @@ -/* - * Debug.h - * - * Dynamic (runtime) debug framework implementation. - * -kaiwan. - */ -#ifndef _DEBUG_H -#define _DEBUG_H -#include <linux/string.h> -#define NONE 0xFFFF - -/* TYPE and SUBTYPE - * Define valid TYPE (or category or code-path, however you like to think of it) - * and SUBTYPE s. - * Type and SubType are treated as bitmasks. - */ -#define DBG_TYPE_INITEXIT (1 << 0) /* 1 */ -#define DBG_TYPE_TX (1 << 1) /* 2 */ -#define DBG_TYPE_RX (1 << 2) /* 4 */ -#define DBG_TYPE_OTHERS (1 << 3) /* 8 */ -#define NUMTYPES 4 - -/* -SUBTYPEs for TX : TYPE is DBG_TYPE_TX -----// - * Transmit.c ,Arp.c, LeakyBucket.c, And Qos.c - * total 17 macros - */ -/* Transmit.c */ -#define TX 1 -#define MP_SEND (TX << 0) -#define NEXT_SEND (TX << 1) -#define TX_FIFO (TX << 2) -#define TX_CONTROL (TX << 3) - -/* Arp.c */ -#define IP_ADDR (TX << 4) -#define ARP_REQ (TX << 5) -#define ARP_RESP (TX << 6) - -/* Leakybucket.c */ -#define TOKEN_COUNTS (TX << 8) -#define CHECK_TOKENS (TX << 9) -#define TX_PACKETS (TX << 10) -#define TIMER (TX << 11) - -/* Qos.c */ -#define QOS TX -#define QUEUE_INDEX (QOS << 12) -#define IPV4_DBG (QOS << 13) -#define IPV6_DBG (QOS << 14) -#define PRUNE_QUEUE (QOS << 15) -#define SEND_QUEUE (QOS << 16) - -/* TX_Misc */ -#define TX_OSAL_DBG (TX << 17) - -/* --SUBTYPEs for ------INIT & EXIT--------------------- - * ------------ TYPE is DBG_TYPE_INITEXIT -----// - * DriverEntry.c, bcmfwup.c, ChipDetectTask.c, HaltnReset.c, InterfaceDDR.c - */ -#define MP 1 -#define DRV_ENTRY (MP << 0) -#define MP_INIT (MP << 1) -#define READ_REG (MP << 3) -#define DISPATCH (MP << 2) -#define CLAIM_ADAP (MP << 4) -#define REG_IO_PORT (MP << 5) -#define INIT_DISP (MP << 6) -#define RX_INIT (MP << 7) - -/* -SUBTYPEs for --RX---------------------------------- - * ------------RX : TYPE is DBG_TYPE_RX -----// - * Receive.c - */ -#define RX 1 -#define RX_DPC (RX << 0) -#define RX_CTRL (RX << 3) -#define RX_DATA (RX << 4) -#define MP_RETURN (RX << 1) -#define LINK_MSG (RX << 2) - -/* -SUBTYPEs for ----OTHER ROUTINES------------------ - * ------------OTHERS : TYPE is DBG_TYPE_OTHER -----// - * HaltnReset,CheckForHang,PnP,Misc,CmHost - * total 12 macros - */ -#define OTHERS 1 -#define ISR OTHERS -#define MP_DPC (ISR << 0) - -/* HaltnReset.c */ -#define HALT OTHERS -#define MP_HALT (HALT << 1) -#define CHECK_HANG (HALT << 2) -#define MP_RESET (HALT << 3) -#define MP_SHUTDOWN (HALT << 4) - -/* pnp.c */ -#define PNP OTHERS -#define MP_PNP (PNP << 5) - -/* Misc.c */ -#define MISC OTHERS -#define DUMP_INFO (MISC << 6) -#define CLASSIFY (MISC << 7) -#define LINK_UP_MSG (MISC << 8) -#define CP_CTRL_PKT (MISC << 9) -#define DUMP_CONTROL (MISC << 10) -#define LED_DUMP_INFO (MISC << 11) - -/* CmHost.c */ -#define CMHOST OTHERS -#define SERIAL (OTHERS << 12) -#define IDLE_MODE (OTHERS << 13) -#define WRM (OTHERS << 14) -#define RDM (OTHERS << 15) - -/* TODO - put PHS_SEND in Tx PHS_RECEIVE in Rx path ? */ -#define PHS_SEND (OTHERS << 16) -#define PHS_RECEIVE (OTHERS << 17) -#define PHS_MODULE (OTHERS << 18) - -#define INTF_INIT (OTHERS << 19) -#define INTF_ERR (OTHERS << 20) -#define INTF_WARN (OTHERS << 21) -#define INTF_NORM (OTHERS << 22) - -#define IRP_COMPLETION (OTHERS << 23) -#define SF_DESCRIPTOR_CNTS (OTHERS << 24) -#define PHS_DISPATCH (OTHERS << 25) -#define OSAL_DBG (OTHERS << 26) -#define NVM_RW (OTHERS << 27) - -#define HOST_MIBS (OTHERS << 28) -#define CONN_MSG (CMHOST << 29) - -/* Debug level - * We have 8 debug levels, in (numerical) increasing order of verbosity. - * IMP: Currently implementing ONLY DBG_LVL_ALL , i.e. , all debug prints will - * appear (of course, iff global debug flag is ON and we match the Type and SubType). - * Finer granularity debug levels are currently not in use, although the feature exists. - * - * Another way to say this: - * All the debug prints currently have 'debug_level' set to DBG_LVL_ALL . - * You can compile-time change that to any of the below, if you wish to. However, as of now, there's - * no dynamic facility to have the userspace 'TestApp' set debug_level. Slated for future expansion. - */ -#define BCM_ALL 7 -#define BCM_LOW 6 -#define BCM_PRINT 5 -#define BCM_NORMAL 4 -#define BCM_MEDIUM 3 -#define BCM_SCREAM 2 -#define BCM_ERR 1 -/* Not meant for developer in debug prints. - * To be used to disable all prints by setting the DBG_LVL_CURR to this value - */ -#define BCM_NONE 0 - -/* The current driver logging level. - * Everything at this level and (numerically) lower (meaning higher prio) - * is logged. - * Replace 'BCM_ALL' in the DBG_LVL_CURR macro with the logging level desired. - * For eg. to set the logging level to 'errors only' use: - * #define DBG_LVL_CURR (BCM_ERR) - */ - -#define DBG_LVL_CURR (BCM_ALL) -#define DBG_LVL_ALL BCM_ALL - -/* ---Userspace mapping of Debug State. - * Delibrately matches that of the Windows driver.. - * The TestApp's ioctl passes this struct to us. - */ -struct bcm_user_debug_state { - unsigned int Subtype, Type; - unsigned int OnOff; -/* unsigned int debug_level; future expansion */ -} __packed; - -/* ---Kernel-space mapping of Debug State */ -struct bcm_debug_state { - unsigned int type; - /* A bitmap of 32 bits for Subtype per Type. - * Valid indexes in 'subtype' array are *only* 1,2,4 and 8, - * corresponding to valid Type values. Hence we use the 'Type' field - * as the index value, ignoring the array entries 0,3,5,6,7 ! - */ - unsigned int subtype[(NUMTYPES*2)+1]; - unsigned int debug_level; -}; -/* Instantiated in the Adapter structure - * We'll reuse the debug level parameter to include a bit (the MSB) to indicate whether or not - * we want the function's name printed. - */ -#define DBG_NO_FUNC_PRINT (1 << 31) -#define DBG_LVL_BITMASK 0xFF - -/* --- Only for direct printk's; "hidden" to API. */ -#define DBG_TYPE_PRINTK 3 - -#define BCM_DEBUG_PRINT(Adapter, Type, SubType, dbg_level, string, args...) \ - do { \ - if (DBG_TYPE_PRINTK == Type) \ - pr_info("%s:" string, __func__, ##args); \ - else if (Adapter && \ - (dbg_level & DBG_LVL_BITMASK) <= Adapter->stDebugState.debug_level && \ - (Type & Adapter->stDebugState.type) && \ - (SubType & Adapter->stDebugState.subtype[Type])) { \ - if (dbg_level & DBG_NO_FUNC_PRINT) \ - pr_debug("%s:\n", string); \ - else \ - pr_debug("%s:\n" string, __func__, ##args); \ - } \ - } while (0) - -#define BCM_DEBUG_PRINT_BUFFER(Adapter, Type, SubType, dbg_level, buffer, bufferlen) \ - do { \ - if (DBG_TYPE_PRINTK == Type || \ - (Adapter && \ - (dbg_level & DBG_LVL_BITMASK) <= Adapter->stDebugState.debug_level && \ - (Type & Adapter->stDebugState.type) && \ - (SubType & Adapter->stDebugState.subtype[Type]))) { \ - pr_debug("%s:\n", __func__); \ - print_hex_dump(KERN_DEBUG, " ", DUMP_PREFIX_OFFSET, \ - 16, 1, buffer, bufferlen, false); \ - } \ - } while (0) - -#define BCM_SHOW_DEBUG_BITMAP(Adapter) do { \ - int i; \ - for (i = 0; i < (NUMTYPES * 2) + 1; i++) { \ - if ((i == 1) || (i == 2) || (i == 4) || (i == 8)) { \ - /* CAUTION! Forcefully turn on ALL debug paths and subpaths! \ - * Adapter->stDebugState.subtype[i] = 0xffffffff; \ - */ \ - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "subtype[%d] = 0x%08x\n", \ - i, Adapter->stDebugState.subtype[i]); \ - } \ - } \ -} while (0) - -#endif |