1 files changed, 0 insertions, 84 deletions
diff --git a/drivers/staging/bcm/led_control.h b/drivers/staging/bcm/led_control.h
deleted file mode 100644
index 1b24bf4658af..000000000000
--- a/drivers/staging/bcm/led_control.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef _LED_CONTROL_H
-#define _LED_CONTROL_H
-
-#define NUM_OF_LEDS				4
-#define DSD_START_OFFSET			0x0200
-#define EEPROM_VERSION_OFFSET			0x020E
-#define EEPROM_HW_PARAM_POINTER_ADDRESS		0x0218
-#define EEPROM_HW_PARAM_POINTER_ADDRRES_MAP5	0x0220
-#define GPIO_SECTION_START_OFFSET		0x03
-#define COMPATIBILITY_SECTION_LENGTH		42
-#define COMPATIBILITY_SECTION_LENGTH_MAP5	84
-#define EEPROM_MAP5_MAJORVERSION		5
-#define EEPROM_MAP5_MINORVERSION		0
-#define MAX_NUM_OF_BLINKS			10
-#define NUM_OF_GPIO_PINS			16
-#define DISABLE_GPIO_NUM			0xFF
-#define EVENT_SIGNALED				1
-#define MAX_FILE_NAME_BUFFER_SIZE		100
-
-#define TURN_ON_LED(ad, GPIO, index) do {					\
-		unsigned int gpio_val = GPIO;					\
-		(ad->LEDInfo.LEDState[index].BitPolarity == 1) ?	\
-			wrmaltWithLock(ad, BCM_GPIO_OUTPUT_SET_REG, &gpio_val, sizeof(gpio_val)) : \
-			wrmaltWithLock(ad, BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)); \
-	} while (0)
-
-#define TURN_OFF_LED(ad, GPIO, index)  do {					\
-		unsigned int gpio_val = GPIO;					\
-		(ad->LEDInfo.LEDState[index].BitPolarity == 1) ?	\
-			wrmaltWithLock(ad, BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)) : \
-			wrmaltWithLock(ad, BCM_GPIO_OUTPUT_SET_REG, &gpio_val, sizeof(gpio_val)); \
-	} while (0)
-
-enum bcm_led_colors {
-	RED_LED		= 1,
-	BLUE_LED	= 2,
-	YELLOW_LED	= 3,
-	GREEN_LED	= 4
-};
-
-enum bcm_led_events {
-	SHUTDOWN_EXIT		= 0x00,
-	DRIVER_INIT		= 0x1,
-	FW_DOWNLOAD		= 0x2,
-	FW_DOWNLOAD_DONE	= 0x4,
-	NO_NETWORK_ENTRY	= 0x8,
-	NORMAL_OPERATION	= 0x10,
-	LOWPOWER_MODE_ENTER	= 0x20,
-	IDLEMODE_CONTINUE	= 0x40,
-	IDLEMODE_EXIT		= 0x80,
-	LED_THREAD_INACTIVE	= 0x100,  /* Makes the LED thread Inactivce. It wil be equivallent to putting the thread on hold. */
-	LED_THREAD_ACTIVE	= 0x200,  /* Makes the LED Thread Active back. */
-	DRIVER_HALT		= 0xff
-}; /* Enumerated values of different driver states */
-
-/*
- * Structure which stores the information of different LED types
- * and corresponding LED state information of driver states
- */
-struct bcm_led_state_info {
-	unsigned char LED_Type; /* specify GPIO number - use 0xFF if not used */
-	unsigned char LED_On_State; /* Bits set or reset for different states */
-	unsigned char LED_Blink_State; /* Bits set or reset for blinking LEDs for different states */
-	unsigned char GPIO_Num;
-	unsigned char BitPolarity; /* To represent whether H/W is normal polarity or reverse polarity */
-};
-
-struct bcm_led_info {
-	struct bcm_led_state_info LEDState[NUM_OF_LEDS];
-	bool		bIdleMode_tx_from_host; /* Variable to notify whether driver came out from idlemode due to Host or target */
-	bool		bIdle_led_off;
-	wait_queue_head_t	notify_led_event;
-	wait_queue_head_t	idleModeSyncEvent;
-	struct task_struct	*led_cntrl_threadid;
-	int		led_thread_running;
-	bool		bLedInitDone;
-};
-
-/* LED Thread state. */
-#define BCM_LED_THREAD_DISABLED		0   /* LED Thread is not running. */
-#define BCM_LED_THREAD_RUNNING_ACTIVELY	1   /* LED thread is running. */
-#define BCM_LED_THREAD_RUNNING_INACTIVELY 2 /* LED thread has been put on hold */
-
-#endif