diff options
Diffstat (limited to 'drivers/staging/benet/fwcmd_common_bmap.h')
| -rw-r--r-- | drivers/staging/benet/fwcmd_common_bmap.h | 717 |
1 files changed, 0 insertions, 717 deletions
diff --git a/drivers/staging/benet/fwcmd_common_bmap.h b/drivers/staging/benet/fwcmd_common_bmap.h deleted file mode 100644 index a007cf276500..000000000000 --- a/drivers/staging/benet/fwcmd_common_bmap.h +++ /dev/null @@ -1,717 +0,0 @@ -/* - * Copyright (C) 2005 - 2008 ServerEngines - * All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. The full GNU General - * Public License is included in this distribution in the file called COPYING. - * - * Contact Information: - * linux-drivers@serverengines.com - * - * ServerEngines - * 209 N. Fair Oaks Ave - * Sunnyvale, CA 94085 - */ -/* - * Autogenerated by srcgen version: 0127 - */ -#ifndef __fwcmd_common_bmap_h__ -#define __fwcmd_common_bmap_h__ -#include "fwcmd_types_bmap.h" -#include "fwcmd_hdr_bmap.h" - -#if defined(__BIG_ENDIAN) - /* Physical Address. */ -struct PHYS_ADDR { - union { - struct { - u32 lo; /* DWORD 0 */ - u32 hi; /* DWORD 1 */ - } __packed; /* unnamed struct */ - u32 dw[2]; /* dword union */ - }; /* unnamed union */ -} __packed ; - - -#else - /* Physical Address. */ -struct PHYS_ADDR { - union { - struct { - u32 lo; /* DWORD 0 */ - u32 hi; /* DWORD 1 */ - } __packed; /* unnamed struct */ - u32 dw[2]; /* dword union */ - }; /* unnamed union */ -} __packed ; - -struct BE_LINK_STATUS { - u8 mac0_duplex; - u8 mac0_speed; - u8 mac1_duplex; - u8 mac1_speed; - u8 mgmt_mac_duplex; - u8 mgmt_mac_speed; - u8 active_port; - u8 rsvd0; - u8 mac0_fault; - u8 mac1_fault; - u16 rsvd1; -} __packed; -#endif - -struct FWCMD_COMMON_ANON_170_REQUEST { - u32 rsvd0; -} __packed; - -union LINK_STATUS_QUERY_PARAMS { - struct BE_LINK_STATUS response; - struct FWCMD_COMMON_ANON_170_REQUEST request; -} __packed; - -/* - * Queries the the link status for all ports. The valid values below - * DO NOT indicate that a particular duplex or speed is supported by - * BladeEngine. These enumerations simply list all possible duplexes - * and speeds for any port. Consult BladeEngine product documentation - * for the supported parameters. - */ -struct FWCMD_COMMON_NTWK_LINK_STATUS_QUERY { - union FWCMD_HEADER header; - union LINK_STATUS_QUERY_PARAMS params; -} __packed; - -struct FWCMD_COMMON_ANON_171_REQUEST { - u8 type; - u8 port; - u8 mac1; - u8 permanent; -} __packed; - -struct FWCMD_COMMON_ANON_172_RESPONSE { - struct MAC_ADDRESS_FORMAT mac; -} __packed; - -union NTWK_MAC_QUERY_PARAMS { - struct FWCMD_COMMON_ANON_171_REQUEST request; - struct FWCMD_COMMON_ANON_172_RESPONSE response; -} __packed; - -/* Queries one MAC address. */ -struct FWCMD_COMMON_NTWK_MAC_QUERY { - union FWCMD_HEADER header; - union NTWK_MAC_QUERY_PARAMS params; -} __packed; - -struct MAC_SET_PARAMS_IN { - u8 type; - u8 port; - u8 mac1; - u8 invalidate; - struct MAC_ADDRESS_FORMAT mac; -} __packed; - -struct MAC_SET_PARAMS_OUT { - u32 rsvd0; -} __packed; - -union MAC_SET_PARAMS { - struct MAC_SET_PARAMS_IN request; - struct MAC_SET_PARAMS_OUT response; -} __packed; - -/* Sets a MAC address. */ -struct FWCMD_COMMON_NTWK_MAC_SET { - union FWCMD_HEADER header; - union MAC_SET_PARAMS params; -} __packed; - -/* MAC address list. */ -struct NTWK_MULTICAST_MAC_LIST { - u8 byte[6]; -} __packed; - -struct FWCMD_COMMON_NTWK_MULTICAST_SET_REQUEST_PAYLOAD { - u16 num_mac; - u8 promiscuous; - u8 rsvd0; - struct NTWK_MULTICAST_MAC_LIST mac[32]; -} __packed; - -struct FWCMD_COMMON_ANON_174_RESPONSE { - u32 rsvd0; -} __packed; - -union FWCMD_COMMON_ANON_173_PARAMS { - struct FWCMD_COMMON_NTWK_MULTICAST_SET_REQUEST_PAYLOAD request; - struct FWCMD_COMMON_ANON_174_RESPONSE response; -} __packed; - -/* - * Sets multicast address hash. The MPU will merge the MAC address lists - * from all clients, including the networking and storage functions. - * This command may fail if the final merged list of MAC addresses exceeds - * 32 entries. - */ -struct FWCMD_COMMON_NTWK_MULTICAST_SET { - union FWCMD_HEADER header; - union FWCMD_COMMON_ANON_173_PARAMS params; -} __packed; - -struct FWCMD_COMMON_NTWK_VLAN_CONFIG_REQUEST_PAYLOAD { - u16 num_vlan; - u8 promiscuous; - u8 rsvd0; - u16 vlan_tag[32]; -} __packed; - -struct FWCMD_COMMON_ANON_176_RESPONSE { - u32 rsvd0; -} __packed; - -union FWCMD_COMMON_ANON_175_PARAMS { - struct FWCMD_COMMON_NTWK_VLAN_CONFIG_REQUEST_PAYLOAD request; - struct FWCMD_COMMON_ANON_176_RESPONSE response; -} __packed; - -/* - * Sets VLAN tag filter. The MPU will merge the VLAN tag list from all - * clients, including the networking and storage functions. This command - * may fail if the final vlan_tag array (from all functions) is longer - * than 32 entries. - */ -struct FWCMD_COMMON_NTWK_VLAN_CONFIG { - union FWCMD_HEADER header; - union FWCMD_COMMON_ANON_175_PARAMS params; -} __packed; - -struct RING_DESTROY_REQUEST { - u16 ring_type; - u16 id; - u8 bypass_flush; - u8 rsvd0; - u16 rsvd1; -} __packed; - -struct FWCMD_COMMON_ANON_190_RESPONSE { - u32 rsvd0; -} __packed; - -union FWCMD_COMMON_ANON_189_PARAMS { - struct RING_DESTROY_REQUEST request; - struct FWCMD_COMMON_ANON_190_RESPONSE response; -} __packed; -/* - * Command for destroying any ring. The connection(s) using the ring should - * be quiesced before destroying the ring. - */ -struct FWCMD_COMMON_RING_DESTROY { - union FWCMD_HEADER header; - union FWCMD_COMMON_ANON_189_PARAMS params; -} __packed; - -struct FWCMD_COMMON_ANON_192_REQUEST { - u16 num_pages; - u16 rsvd0; - struct CQ_CONTEXT_AMAP context; - struct PHYS_ADDR pages[4]; -} __packed ; - -struct FWCMD_COMMON_ANON_193_RESPONSE { - u16 cq_id; -} __packed ; - -union FWCMD_COMMON_ANON_191_PARAMS { - struct FWCMD_COMMON_ANON_192_REQUEST request; - struct FWCMD_COMMON_ANON_193_RESPONSE response; -} __packed ; - -/* - * Command for creating a completion queue. A Completion Queue must span - * at least 1 page and at most 4 pages. Each completion queue entry - * is 16 bytes regardless of CQ entry format. Thus the ring must be - * at least 256 entries deep (corresponding to 1 page) and can be at - * most 1024 entries deep (corresponding to 4 pages). The number of - * pages posted must contain the CQ ring size as encoded in the context. - * - */ -struct FWCMD_COMMON_CQ_CREATE { - union FWCMD_HEADER header; - union FWCMD_COMMON_ANON_191_PARAMS params; -} __packed ; - -struct FWCMD_COMMON_ANON_198_REQUEST { - u16 num_pages; - u16 rsvd0; - struct EQ_CONTEXT_AMAP context; - struct PHYS_ADDR pages[8]; -} __packed ; - -struct FWCMD_COMMON_ANON_199_RESPONSE { - u16 eq_id; -} __packed ; - -union FWCMD_COMMON_ANON_197_PARAMS { - struct FWCMD_COMMON_ANON_198_REQUEST request; - struct FWCMD_COMMON_ANON_199_RESPONSE response; -} __packed ; - -/* - * Command for creating a event queue. An Event Queue must span at least - * 1 page and at most 8 pages. The number of pages posted must contain - * the EQ ring. The ring is defined by the size of the EQ entries (encoded - * in the context) and the number of EQ entries (also encoded in the - * context). - */ -struct FWCMD_COMMON_EQ_CREATE { - union FWCMD_HEADER header; - union FWCMD_COMMON_ANON_197_PARAMS params; -} __packed ; - -struct FWCMD_COMMON_ANON_201_REQUEST { - u16 cq_id; - u16 bcmc_cq_id; - u16 num_pages; - u16 rsvd0; - struct PHYS_ADDR pages[2]; -} __packed; - -struct FWCMD_COMMON_ANON_202_RESPONSE { - u16 id; -} __packed; - -union FWCMD_COMMON_ANON_200_PARAMS { - struct FWCMD_COMMON_ANON_201_REQUEST request; - struct FWCMD_COMMON_ANON_202_RESPONSE response; -} __packed; - -/* - * Command for creating Ethernet receive ring. An ERX ring contains ETH_RX_D - * entries (8 bytes each). An ERX ring must be 1024 entries deep - * (corresponding to 2 pages). - */ -struct FWCMD_COMMON_ETH_RX_CREATE { - union FWCMD_HEADER header; - union FWCMD_COMMON_ANON_200_PARAMS params; -} __packed; - -struct FWCMD_COMMON_ANON_204_REQUEST { - u16 num_pages; - u8 ulp_num; - u8 type; - struct ETX_CONTEXT_AMAP context; - struct PHYS_ADDR pages[8]; -} __packed ; - -struct FWCMD_COMMON_ANON_205_RESPONSE { - u16 cid; - u8 ulp_num; - u8 rsvd0; -} __packed ; - -union FWCMD_COMMON_ANON_203_PARAMS { - struct FWCMD_COMMON_ANON_204_REQUEST request; - struct FWCMD_COMMON_ANON_205_RESPONSE response; -} __packed ; - -/* - * Command for creating an Ethernet transmit ring. An ETX ring contains - * ETH_WRB entries (16 bytes each). An ETX ring must be at least 256 - * entries deep (corresponding to 1 page) and at most 2k entries deep - * (corresponding to 8 pages). - */ -struct FWCMD_COMMON_ETH_TX_CREATE { - union FWCMD_HEADER header; - union FWCMD_COMMON_ANON_203_PARAMS params; -} __packed ; - -struct FWCMD_COMMON_ANON_222_REQUEST { - u16 num_pages; - u16 rsvd0; - struct MCC_RING_CONTEXT_AMAP context; - struct PHYS_ADDR pages[8]; -} __packed ; - -struct FWCMD_COMMON_ANON_223_RESPONSE { - u16 id; -} __packed ; - -union FWCMD_COMMON_ANON_221_PARAMS { - struct FWCMD_COMMON_ANON_222_REQUEST request; - struct FWCMD_COMMON_ANON_223_RESPONSE response; -} __packed ; - -/* - * Command for creating the MCC ring. An MCC ring must be at least 16 - * entries deep (corresponding to 1 page) and at most 128 entries deep - * (corresponding to 8 pages). - */ -struct FWCMD_COMMON_MCC_CREATE { - union FWCMD_HEADER header; - union FWCMD_COMMON_ANON_221_PARAMS params; -} __packed ; - -struct GET_QOS_IN { - u32 qos_params_rsvd; -} __packed; - -struct GET_QOS_OUT { - u32 max_bits_per_second_NIC; - u32 max_packets_per_second_NIC; - u32 max_ios_per_second_iSCSI; - u32 max_bytes_per_second_iSCSI; - u16 domain_VLAN_tag; - u16 fabric_domain_ID; - u32 qos_params_oem[4]; -} __packed; - -union GET_QOS_PARAMS { - struct GET_QOS_IN request; - struct GET_QOS_OUT response; -} __packed; - -/* QOS/Bandwidth settings per domain. Applicable only in VMs. */ -struct FWCMD_COMMON_GET_QOS { - union FWCMD_HEADER header; - union GET_QOS_PARAMS params; -} __packed; - -struct SET_QOS_IN { - u32 valid_flags; - u32 max_bits_per_second_NIC; - u32 max_packets_per_second_NIC; - u32 max_ios_per_second_iSCSI; - u32 max_bytes_per_second_iSCSI; - u16 domain_VLAN_tag; - u16 fabric_domain_ID; - u32 qos_params_oem[4]; -} __packed; - -struct SET_QOS_OUT { - u32 qos_params_rsvd; -} __packed; - -union SET_QOS_PARAMS { - struct SET_QOS_IN request; - struct SET_QOS_OUT response; -} __packed; - -/* QOS/Bandwidth settings per domain. Applicable only in VMs. */ -struct FWCMD_COMMON_SET_QOS { - union FWCMD_HEADER header; - union SET_QOS_PARAMS params; -} __packed; - -struct SET_FRAME_SIZE_IN { - u32 max_tx_frame_size; - u32 max_rx_frame_size; -} __packed; - -struct SET_FRAME_SIZE_OUT { - u32 chip_max_tx_frame_size; - u32 chip_max_rx_frame_size; -} __packed; - -union SET_FRAME_SIZE_PARAMS { - struct SET_FRAME_SIZE_IN request; - struct SET_FRAME_SIZE_OUT response; -} __packed; - -/* Set frame size command. Only host domain may issue this command. */ -struct FWCMD_COMMON_SET_FRAME_SIZE { - union FWCMD_HEADER header; - union SET_FRAME_SIZE_PARAMS params; -} __packed; - -struct FORCE_FAILOVER_IN { - u32 move_to_port; - u32 failover_config; -} __packed; - -struct FWCMD_COMMON_ANON_231_RESPONSE { - u32 rsvd0; -} __packed; - -union FWCMD_COMMON_ANON_230_PARAMS { - struct FORCE_FAILOVER_IN request; - struct FWCMD_COMMON_ANON_231_RESPONSE response; -} __packed; - -/* - * Use this command to control failover in BladeEngine. It may be used - * to failback to a restored port or to forcibly move traffic from - * one port to another. It may also be used to enable or disable the - * automatic failover feature. This command can only be issued by domain - * 0. - */ -struct FWCMD_COMMON_FORCE_FAILOVER { - union FWCMD_HEADER header; - union FWCMD_COMMON_ANON_230_PARAMS params; -} __packed; - -struct FWCMD_COMMON_ANON_240_REQUEST { - u64 context; -} __packed; - -struct FWCMD_COMMON_ANON_241_RESPONSE { - u64 context; -} __packed; - -union FWCMD_COMMON_ANON_239_PARAMS { - struct FWCMD_COMMON_ANON_240_REQUEST request; - struct FWCMD_COMMON_ANON_241_RESPONSE response; -} __packed; - -/* - * This command can be used by clients as a no-operation request. Typical - * uses for drivers are as a heartbeat mechanism, or deferred processing - * catalyst. The ARM will always complete this command with a good completion. - * The 64-bit parameter is not touched by the ARM processor. - */ -struct FWCMD_COMMON_NOP { - union FWCMD_HEADER header; - union FWCMD_COMMON_ANON_239_PARAMS params; -} __packed; - -struct NTWK_RX_FILTER_SETTINGS { - u8 promiscuous; - u8 ip_cksum; - u8 tcp_cksum; - u8 udp_cksum; - u8 pass_err; - u8 pass_ckerr; - u8 strip_crc; - u8 mcast_en; - u8 bcast_en; - u8 mcast_promiscuous_en; - u8 unicast_en; - u8 vlan_promiscuous; -} __packed; - -union FWCMD_COMMON_ANON_242_PARAMS { - struct NTWK_RX_FILTER_SETTINGS request; - struct NTWK_RX_FILTER_SETTINGS response; -} __packed; - -/* - * This command is used to modify the ethernet receive filter configuration. - * Only domain 0 network function drivers may issue this command. The - * applied configuration is returned in the response payload. Note: - * Some receive packet filter settings are global on BladeEngine and - * can affect both the storage and network function clients that the - * BladeEngine hardware and firmware serve. Additionaly, depending - * on the revision of BladeEngine, some ethernet receive filter settings - * are dependent on others. If a dependency exists between settings - * for the BladeEngine revision, and the command request settings do - * not meet the dependency requirement, the invalid settings will not - * be applied despite the comand succeeding. For example: a driver may - * request to enable broadcast packets, but not enable multicast packets. - * On early revisions of BladeEngine, there may be no distinction between - * broadcast and multicast filters, so broadcast could not be enabled - * without enabling multicast. In this scenario, the comand would still - * succeed, but the response payload would indicate the previously - * configured broadcast and multicast setting. - */ -struct FWCMD_COMMON_NTWK_RX_FILTER { - union FWCMD_HEADER header; - union FWCMD_COMMON_ANON_242_PARAMS params; -} __packed; - - -struct FWCMD_COMMON_ANON_244_REQUEST { - u32 rsvd0; -} __packed; - -struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD { - u8 firmware_version_string[32]; - u8 fw_on_flash_version_string[32]; -} __packed; - -union FWCMD_COMMON_ANON_243_PARAMS { - struct FWCMD_COMMON_ANON_244_REQUEST request; - struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD response; -} __packed; - -/* This comand retrieves the firmware version. */ -struct FWCMD_COMMON_GET_FW_VERSION { - union FWCMD_HEADER header; - union FWCMD_COMMON_ANON_243_PARAMS params; -} __packed; - -struct FWCMD_COMMON_ANON_246_REQUEST { - u16 tx_flow_control; - u16 rx_flow_control; -} __packed; - -struct FWCMD_COMMON_ANON_247_RESPONSE { - u32 rsvd0; -} __packed; - -union FWCMD_COMMON_ANON_245_PARAMS { - struct FWCMD_COMMON_ANON_246_REQUEST request; - struct FWCMD_COMMON_ANON_247_RESPONSE response; -} __packed; - -/* - * This comand is used to program BladeEngine flow control behavior. - * Only the host networking driver is allowed to use this comand. - */ -struct FWCMD_COMMON_SET_FLOW_CONTROL { - union FWCMD_HEADER header; - union FWCMD_COMMON_ANON_245_PARAMS params; -} __packed; - -struct FWCMD_COMMON_ANON_249_REQUEST { - u32 rsvd0; -} __packed; - -struct FWCMD_COMMON_ANON_250_RESPONSE { - u16 tx_flow_control; - u16 rx_flow_control; -} __packed; - -union FWCMD_COMMON_ANON_248_PARAMS { - struct FWCMD_COMMON_ANON_249_REQUEST request; - struct FWCMD_COMMON_ANON_250_RESPONSE response; -} __packed; - -/* This comand is used to read BladeEngine flow control settings. */ -struct FWCMD_COMMON_GET_FLOW_CONTROL { - union FWCMD_HEADER header; - union FWCMD_COMMON_ANON_248_PARAMS params; -} __packed; - -struct EQ_DELAY_PARAMS { - u32 eq_id; - u32 delay_in_microseconds; -} __packed; - -struct FWCMD_COMMON_ANON_257_REQUEST { - u32 num_eq; - u32 rsvd0; - struct EQ_DELAY_PARAMS delay[16]; -} __packed; - -struct FWCMD_COMMON_ANON_258_RESPONSE { - u32 delay_resolution_in_microseconds; - u32 delay_max_in_microseconds; -} __packed; - -union MODIFY_EQ_DELAY_PARAMS { - struct FWCMD_COMMON_ANON_257_REQUEST request; - struct FWCMD_COMMON_ANON_258_RESPONSE response; -} __packed; - -/* This comand changes the EQ delay for a given set of EQs. */ -struct FWCMD_COMMON_MODIFY_EQ_DELAY { - union FWCMD_HEADER header; - union MODIFY_EQ_DELAY_PARAMS params; -} __packed; - -struct FWCMD_COMMON_ANON_260_REQUEST { - u32 rsvd0; -} __packed; - -struct BE_FIRMWARE_CONFIG { - u16 be_config_number; - u16 asic_revision; - u32 nic_ulp_mask; - u32 tulp_mask; - u32 iscsi_ulp_mask; - u32 rdma_ulp_mask; - u32 rsvd0[4]; - u32 eth_tx_id_start; - u32 eth_tx_id_count; - u32 eth_rx_id_start; - u32 eth_rx_id_count; - u32 tpm_wrbq_id_start; - u32 tpm_wrbq_id_count; - u32 tpm_defq_id_start; - u32 tpm_defq_id_count; - u32 iscsi_wrbq_id_start; - u32 iscsi_wrbq_id_count; - u32 iscsi_defq_id_start; - u32 iscsi_defq_id_count; - u32 rdma_qp_id_start; - u32 rdma_qp_id_count; - u32 rsvd1[8]; -} __packed; - -union FWCMD_COMMON_ANON_259_PARAMS { - struct FWCMD_COMMON_ANON_260_REQUEST request; - struct BE_FIRMWARE_CONFIG response; -} __packed; - -/* - * This comand queries the current firmware configuration parameters. - * The static configuration type is defined by be_config_number. This - * differentiates different BladeEngine builds, such as iSCSI Initiator - * versus iSCSI Target. For a given static configuration, the Upper - * Layer Protocol (ULP) processors may be reconfigured to support different - * protocols. Each ULP processor supports one or more protocols. The - * masks indicate which processors are configured for each protocol. - * For a given static configuration, the number of TCP connections - * supported for each protocol may vary. The *_id_start and *_id_count - * variables define a linear range of IDs that are available for each - * supported protocol. The *_id_count may be used by the driver to allocate - * the appropriate number of connection resources. The *_id_start may - * be used to map the arbitrary range of IDs to a zero-based range - * of indices. - */ -struct FWCMD_COMMON_FIRMWARE_CONFIG { - union FWCMD_HEADER header; - union FWCMD_COMMON_ANON_259_PARAMS params; -} __packed; - -struct FWCMD_COMMON_PORT_EQUALIZATION_PARAMS { - u32 emph_lev_sel_port0; - u32 emph_lev_sel_port1; - u8 xaui_vo_sel; - u8 xaui_state; - u16 rsvd0; - u32 xaui_eq_vector; -} __packed; - -struct FWCMD_COMMON_ANON_262_REQUEST { - u32 rsvd0; -} __packed; - -union FWCMD_COMMON_ANON_261_PARAMS { - struct FWCMD_COMMON_ANON_262_REQUEST request; - struct FWCMD_COMMON_PORT_EQUALIZATION_PARAMS response; -} __packed; - -/* - * This comand can be used to read XAUI equalization parameters. The - * ARM firmware applies default equalization parameters during initialization. - * These parameters may be customer-specific when derived from the - * SEEPROM. See SEEPROM_DATA for equalization specific fields. - */ -struct FWCMD_COMMON_GET_PORT_EQUALIZATION { - union FWCMD_HEADER header; - union FWCMD_COMMON_ANON_261_PARAMS params; -} __packed; - -struct FWCMD_COMMON_ANON_264_RESPONSE { - u32 rsvd0; -} __packed; - -union FWCMD_COMMON_ANON_263_PARAMS { - struct FWCMD_COMMON_PORT_EQUALIZATION_PARAMS request; - struct FWCMD_COMMON_ANON_264_RESPONSE response; -} __packed; - -/* - * This comand can be used to set XAUI equalization parameters. The ARM - * firmware applies default equalization parameters during initialization. - * These parameters may be customer-specific when derived from the - * SEEPROM. See SEEPROM_DATA for equalization specific fields. - */ -struct FWCMD_COMMON_SET_PORT_EQUALIZATION { - union FWCMD_HEADER header; - union FWCMD_COMMON_ANON_263_PARAMS params; -} __packed; - -#endif /* __fwcmd_common_bmap_h__ */ |